Solar Panel Kits
Whether you have a Campervan, Motorhome, Caravan or Boat our van solar panel kits are a great investment for anyone who loves to travel and explore the great outdoors. These kits are easy to install and come with everything you need to start generating your own clean, renewable energy on the go. With a Van Junkies solar panel kit, you can save money and reduce your dependence on noisy, dirty generators or running your engine. Plus, you'll be able to enjoy the convenience and freedom of having a reliable source of power wherever you go. Whether you're boondocking, going fully off grid, or parked at a caravan park, a solar panel kit will keep your batteries charged and your appliances running. Investing in a solar panel kit is a smart, environmentally-friendly choice that will pay for itself in no time.
If you don't find the kit you need give us a ring and we will put together a custom quote for you at no extra cost.
103 Products Found
£467.99
Victron 370W Monocrystalline Solar kit with SmartSolar 100/30 MPPT, Cables & MC4
370W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats (2 x 185w Panels)
This 370w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
Panel sizes are 1485x668x30mm
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• High-performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m red & black extension leads
Full Kit with Victron 2 * 185W Monocrystalline panels, 2 * mount sets (optional), Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/30 MPPT charge controller, 5m of Black PV Cable (x2) & MC4 Connectors.1 x Ressetable Circuit Breaker1 x MPPT to Battery cable set with in-line fuse
Mounts available (optional):
6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets
This highly efficient Victron solar 370w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications.
Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances
The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions.
This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries.
Solar Panel Specifications
Watts
185
Maximum Power Voltage - Vmpp(V)
19.68
Maximum Power Current - Impp(A)
9.41
Open Circuit Voltage - Voc(V)
24.11
Short Circuit Current - Isc (A)
9.91
Height (mm)
1485
Width (mm)
668
Thickness (mm)
30
Weight (KG)
11
Cell Type
Mono
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
Wiring guide for Solar Panel Kits in Series
...Read more
View Product
£408.99
Victron 260W Mono Solar panel kit with SmartSolar 20A MPPT, Mounts, Cables & MC4
260W Victron Energy Van Solar Panel Kit (2 * 130w Panels) Perfect for Campervans, Motorhomes & Caravans
Panel sizes are 1200x668x30mm
This 260w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• High performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m red & black extension leads
Full Kit with Victron 2 * 130W Monocrystalline panels, 8 x Z Brackets or plastic corner fixing brackets, Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/20 MPPT charge controller, 10m of PV Cable & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cable with In-Line Fuse.
This highly efficient Victron solar 260w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications.
Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances
The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions.
This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries.
Wiring guide for Solar Panel Kits in Series
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£290.99
Victron 185W Monocrystalline Solar panel kit with SmartSolar MPPT, Cables & MC4
185W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats
Panel sizes are 1485x668x30mm
This 185w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron Smartsolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• High performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads
Full Kit with Victron 185W Monocrystalline panel, optional plastic or aluminium mounting brackets, Cable entry Gland, Victron 75/15 Smartsolar MPPT charge controller, 10m of Black PV Cable (2 x 5m) & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cables with In-Line Fuse.
Mounts Optional:
6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets
Ideal for charging battery banks up to 250ah
This highly efficient Victron solar 185w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications.
Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances
The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions.
This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries.
Solar Panel Specifications
Watts
185
Maximum Power Voltage - Vmpp(V)
19.68
Maximum Power Current - Impp(A)
9.41
Open Circuit Voltage - Voc(V)
24.11
Short Circuit Current - Isc (A)
9.91
Height (mm)
1485
Width (mm)
668
Thickness (mm)
30
Weight (KG)
11
Cell Type
Mono
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£596.99
200w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15
200w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4)
Panel junction box is located underneath the panel
This 200w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
200w Semi-Flexible Durable Black Solar Panel 1390 x 710 x 3mm
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m)
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
3 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws)
The panel is incredibly light (only 3.65kg) and very thin (just 3mm) which is great for all vehicles
High resistance to salt water environments makes it perfect for boats and marine applications
Sealed waterproof design ensures it can be used in all weather conditions
Junction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting.
Fitted with a single length of high quality 3m dual core cable for easy installation and wiring
Strong ETFE coating:
In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall.
Simple, professional installation:
This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface.
This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.
Anti-reflective textured surface:
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter).
Solar panel specifications:
Peak power: 200W
Maximum power voltage: 17.6V
Maximum power current: 11.36A
Open circuit voltage: 20.4V
Short circuit current: 12.05A
Dimensions: 1390 x 710 x 2 mm
Weight: 3.50 kg
MPPT Specifications
The Victron 75V 15A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£339.98
110Ah Leisure Battery, 185W Solar Panel Kit with Charge Controller, Cable and Brackets
Package consists of 1x XV110, 1x SCC075015060R, 1x SPM041851200, 1x SCA000500000 & 1x RNG-MTS-ZB & 1 x Roof GlandTitanium XV110 Leisure BatteryThis heavy duty deep cycle battery is designed to meet the needs of leisure and marine vehicles. With its sealed calcium construction which makes it 100% maintenance free this battery is fast becoming a favourite within the industry.This range is suited to seasonal use such as Caravans Motorhomes Boats RV Camping and much more.The product is supplied charged and ready to fit.Features• Excellent design handle – Easy battery replacement• Integrated computer designed and reinforced container – Protection from vibrations and impact• Sealed covers – Prevents acid leaks and minimizes gassing• Totally sealed and spill proof• Maintenance Free – no topping up required• Glass fibre separators• Safety venting system• Sealed water recombination system• Tough polypropylene case designVictron Energy SmartSolar MPPT 75/15A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.MPPT: Ultra Fast Maximum Power Point TrackingBy constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.Bluetooth Smart built-inThe wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.VE.DirectFor a wired data connection to a Color Control GX, other GX products, PC or other devicesBattery Life: intelligent battery managementWhen a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.Internal temperature sensorCompensates absorption and float charge voltage for temperature.Victron Energy Mono Solar Panel 12V 185W• Low voltage-temperature coefficient enhances high-temperature operation.• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.• 25-Year limited warranty on power output and performance.• 5-Year limited warranty on materials and workmanship.• Sealed, waterproof, multi-functional junction box gives high level of safety.• High performance bypass diodes minimize the power drop caused by shade.• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.• A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.• Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.• High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.
Solar Panel Mounting Z Bracket – Set of 4
The Z-Bracket Mount System is designed to support the installation of single solar panel units; generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as an attachment to a user-made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy; affordable and quick.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
Out of Stock
£388.99
Victron 230W Mono Solar panel kit with SmartSolar 20A MPPT, Mounts, Cables & MC4
230W Victron Energy Van Solar Panel Kit (2 * 115w Panels) Perfect for Campervans, Motorhomes & Caravans
Panel sizes are 1015x668x30mm
This 230w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• High performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m red & black extension leads
Full Kit with Victron 2 * 115W Monocrystalline panels, 8 x Z Brackets or plastic corner fixing brackets, Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/20 MPPT charge controller, 10m of PV Cable & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cable with In-Line Fuse.
This highly efficient Victron solar 230w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications.
Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances
The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions.
This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries.
Wiring guide for Solar Panel Kits in Series
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
Out of Stock
£299.99
110Ah Leisure Battery, 115W Solar Panel Kit with Charge Controller, Cable and Brackets
Package consists of 1x XV110 (Titanium), 1x SCC075010060R, 1x SPM041151202, 1x Z Bracket & 1 x 5QM40 & 1 x Roof Gland
Titanium XV110 Dual Purpose Leisure Battery
This heavy duty deep cycle battery is designed to meet the needs of leisure and marine vehicles. With its sealed calcium construction which makes it 100% maintenance free this battery is fast becoming a favourite within the industry.
This range is suited to seasonal use such as Caravans Motorhomes Boats RV Camping and much more.
The product is supplied charged and ready to fit.
Features
Excellent design handle – Easy battery replacement
Integrated computer designed and reinforced container – Protection from vibrations and impact
Sealed covers – Prevents acid leaks and minimizes gassing
Totally sealed and spill proof
Maintenance Free – no topping up required
Glass fibre separators
Safety venting system
Sealed water recombination system
Tough polypropylene case design
Victron Energy SmartSolar MPPT 75/10
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Features
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.
Programmable battery charge algorithm
See the software section on our website for details
Day/night timing and light dimming option
See the software section on Victron for details
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
Victron Energy Solar Panel 12V 115W Mono series 4a
Low voltage-temperature coefficient enhances high-temperature operation.
Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
25-Year limited warranty on power output and performance.
5-Year limited warranty on materials and workmanship.
Sealed, waterproof, multi-functional junction box gives high level of safety.
High performance bypass diodes minimize the power drop caused by shade.
Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.
Victron Energy Solarcable L=5m/4sqmm MC4-M/F
5m/4spmm MC4-M/F of Solarcable
Z Bracket Mounting Aluminium Fixing Set
These brackets are made from 2mm aluminium
Included:
4x Z-Shape Tabbed Solar Panel Brackets
8x Stainless Steel Self Tapping Screws
4x Stainless Steel Spring Washers
4x Stainless Steel Short Bolts
4x Stainless Steel Washers
4x Stainless Steel Nuts
Brand
Titanium & Victron Energy
Manufacturer Part Number
XV110 (Titanium), SCC075010060R, SPM041151202, SCA000500000 and Z Bracket
Battery Voltage
12V
Battery Capacity (C20)
110Ah
Battery Cold Cranking
800CCA
Terminal Type
A, Standard Automotive
Terminal Layout
Right Hand Positive
Battery Dimensions (Including Terminals)
L354 x W174 x H190mm
Battery Weight
23.8Kg
Battery Warranty
4 Years
Battery Technology
Sealed Calcium
Battery Application
Deep Cycle
MPPT Voltage
12/24V
Rated Charge Current
10A
Nominal PV Power, 12V
145W
Max. PV Short Circuit Current
15A
Max. PV Open Circuit Voltage
75V
Protection Category
IP43 (electronic components), IP22 (connection area)
Efficiency
98%
Bluetooth Enabled
Yes
MPPT Dimensions
H100 x W113 x D40mm
MPPT Weight
0.5Kg
MPPT Warranty
5 Years
MPPT Country of Manufacture
India
Solar Panel Voltage
12V
Nominal Power
115W
Cell Type
Monocrystalline
Maximum System Voltage
1000V
Solar Panel Dimensions
L1015 x W668 x D30mm
Solar Panel Weight
8Kg
Solar Panel Warranty
5 Years
Solar Panel Country of Manufacture
China
Cable Length
5m
Cable Thickness
4sqmm
Cable Country of Manufacture
China
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
£549.98
250w Large Solar Panel Kit with Victron Smartsolar MPPT
250w Large Solar Panel Kit with Victron Smartsolar MPPT - Perfect for Campervans, Caravans & Motorhomes
250w Solar panel kit including:Monocrystalline Panel - Dimensions: 1630 x 770 x 35mmVictron 100/20 Smartsolar MPPT Solar Charge Controller2 x black 5m 6mm PV Solar Cable with MC4 Connectors4 x Z Bracket Mounts or 7 Piece ABS Plastic Solar Panel Mount Kit with Double Entry Roof Gland
1 x Resettable Circuit Breaker
1 x MPPT to Battery set of Cables with In-Line Fuse.
This panel has bifacial solar technology to capture sunlight on both the front and rear surfaces, significantly increasing energy output by harnessing reflected light from the roof.
This high efficiency, waterproof 250W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller.
The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.
Solar panel specifications:
Peak power: 250W
Maximum power voltage: 39.02V
Maximum power current: 6.41A
Open circuit voltage: 45.45V
Short circuit current: 6.82A
Power allowance range: +/- 3%
Dimensions: 1630 x 770 x 35mm
Weight: 13.5 kg
4 mounting holes
2 x 60cm of high quality single core solar cable 4.0mm cross section
Male and female MC4 connectors
Features of the Victron SmartSolar MPPT 100/20:• Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetoothenabled device• Ultra-fast Maximum Power Point Tracking (MPPT)• Advanced Maximum Power Point Detection in case of partial shading conditions• Load output on the small models• Battery Life: intelligent battery management by load shedding• Automatic battery voltage recognition• Flexible charge algorithm• Over-temperature protection and power de-rating when temperature is high.Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Advantages of SolarSolar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£729.99
170w Narrow Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15
170w Narrow Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4)
Highly efficient Black German Cells
This 170w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
170w Narrow Semi-Flexible Durable Black Solar Panel 1917 x 548 x 2 mm
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
5 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
This high-efficiency, waterproof 170W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners and even zipping.
Product features:
Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions
Unique narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 55cm wide)
Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel
Incredibly light (only 3.7kg) and very thin (just 2mm) which is great for motorhome and caravan roofs
High resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications
100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified.
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter).
The fibreglass plastic used in this solar panel is very strong and durable. Soft and sealed edges of the solar panel make it resilient to mechanical impact on the sides and help avoid long term delamination.
Solar panel specifications:
Peak power: 170W
Maximum power voltage: 18.7V
Maximum power current: 9A
Open circuit voltage: 22.8V
Short circuit current: 9.5A
Dimensions: 1917 x 548 x 2 mm
Weight: 3.7 kg
MPPT Specifications
The Victron 75V 15A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
Out of Stock
£289.99
200w Large Solar Panel Kit with Victron Smartsolar MPPT
200w Large Solar Panel Kit with Victron Smartsolar MPPT - Perfect for Campervans, Caravans & Motorhomes
200w Solar panel kit includes:Monocrystalline Panel - Dimensions: 1038mm x 992mmVictron 75/15 Smartsolar MPPT Solar Charge Controller2 x black 5m 6mm PV Solar Cable with MC4 ConnectorsOPTIONAL - 7 Piece ABS Plastic Solar Panel Mount Kit OR Z Bracket mounts with Double Entry Roof GlandResettable Circuit BreakerMppt to Battery Cables with In-Line Fuse
This 200w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
This high efficiency, waterproof 200W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).
The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller.
The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.
This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.
Solar panel specifications:
Peak power: 200W
Maximum power voltage: 17.49V
Maximum power current: 11.44A
Open circuit voltage: 21.12V
Short circuit current: 12.24A
Power allowance range: +/- 3%
Dimensions: 1038 x 992 x 30mm
Weight: 10.5 kg
8 mounting holes
2 x 90cm of high quality single core solar cable (4.0mm cross section)
Male and female MC4 connectors
Features of the Victron SmartSolar MPPT 75/15:• Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetoothenabled device• Ultra-fast Maximum Power Point Tracking (MPPT)• Advanced Maximum Power Point Detection in case of partial shading conditions• Load output on the small models• Battery Life: intelligent battery management by load shedding• Automatic battery voltage recognition• Flexible charge algorithm• Over-temperature protection and power de-rating when temperature is high.Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
£705.99
180w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15
180w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs)
Highly efficient German Cells with a Durable ETFE Coating
This 180w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
180w Semi-Flexible Durable Solar Panel Dimensions: 1595 x 699 x 2 mm
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
Double entry Roof Gland
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
5 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
This high-efficiency, waterproof 180W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications. The panel is ideal for curved roofs on boats, caravans, motorhomes, RVs etc. because it can easily fit to the shape of the roof when mounted. This panel can be instantly fitted using the peelable adhesive backing attached to the panel, or can also be secured using self-tapping screws, tenax fasteners or even zipping (not supplied).
Product features:
Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions
Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel
Incredibly light (only 3.65kg) and very thin (just 2mm) which is great for motorhome and caravan roofs
High resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications
100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified.
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter).
The fibreglass plastic used in this solar panel is very strong and durable. Soft and sealed edges of the solar panel make it resilient to mechanical impact on the sides and help avoid long term delamination.
MPPT Specifications
The Victron 75V 15amp MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£564.99
200w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15
200w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop-top roofs)
Highly efficient German Cells with a Durable ETFE Coating
This 200w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
200w Semi-Flexible Durable Solar Panel Dimensions: 1420 x 710 x 2 mm
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
Double entry Roof Gland
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
3 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar panel specifications:
Peak power: 200W
Maximum power voltage: 17.6V
Maximum power current: 11.36A
Open circuit voltage: 20.8V
Short circuit current: 12.05A
Dimensions: 1420 x 710 x 2 mm
Weight: 3.65 kg
Product features:
Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel
Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions
Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws)
The panel is incredibly light (only 3.65kg) and very thin (just 2mm) which is great for all vehicles
High resistance to salt water environments makes it perfect for boats and marine applications
Sealed waterproof design ensures it can be used in all weather conditions
Strong ETFE coating:
In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.
High quality 9-busbar solar cells:
This panel also features new generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited.
Anti-reflective textured surface:
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter).
MPPT Specifications
The Victron 75V 15amp MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
Out of Stock
£604.99
320w Large Solar Panel Kit with Victron Smartsolar MPPT
320w Large Solar Panel Kit with Victron Smartsolar MPPT - Perfect for Campervans, Motorhomes & Off Grid Projects
This large 320w Rigid Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and battery charging efficiency. The ETFE covering makes the solar panel extremely durable and resistant. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
320w Solar panel kit including:
Monocrystalline Panel - Dimensions: 179 x 99 x 4 cm Victron 100/30 Smartsolar MPPT Solar Charge Controller 2 x black 5m 6mm PV Solar Cable with MC4 Connectors 2 x 5m (6mm) solar extension cables with MC4 connectors8 x Z Brackets or 7 Piece ABS Plastic Solar Panel Mount Kit with Double Entry Roof Gland1 x Ressetable Circuit Breaker1 x MPPT to Battery Cables with In-Line Fuse
This high-efficiency 320W monocrystalline solar panel is one of the largest solar panels available on the market. It is perfect for permanent outdoor use to provide free electricity in any grid-tie, hybrid or off-grid application (such as charging batteries in vehicles or boats, or powering an off-grid house or cabin, or working with a grid-tie / hybrid inverter to feed energy into the electrical grid). Due to the size of the area that this solar panel covers it is great for large systems where the time and cost associated with fitting a high-wattage array needs to be minimised. In order to achieve high output this solar panel uses innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel for the same power rating. On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system. The panel is encased in a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. The waterproof design and non-corrosive materials ensure that the panel can be used in all weather conditions and locations, including marine applications where contact with sea water is likely. Each individual solar panel is thoroughly tested to the highest quality standards, and labeled with a unique serial number for further quality control and increased warranty protection.
Solar panel specifications:
Peak power: 320W
Maximum power voltage: 18.35V
Maximum power current: 17.88A
Open circuit voltage: 21.85V
Short circuit current: 19.04A
Power allowance range: +/- 3%
Dimensions: 179 x 99 x 4 cm
Weight: 19.5 kg
8 mounting holes 9 x 14 mm
2 x 5m of high quality single core solar cable (6.0mm cross section)
Male and female MC4 connectors
Features of the Victron SmartSolar MPPT 100/30:
Feature highlights • Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetooth enabled device • Ultra-fast Maximum Power Point Tracking (MPPT) • Advanced Maximum Power Point Detection in case of partial shading conditions • Load output on the small models • Battery Life: intelligent battery management by load shedding • Automatic battery voltage recognition • Flexible charge algorithm • Over-temperature protection and power de-rating when temperature is high.
Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
£635.00
T4/T5/T6 Pop Top Flexible Solar Panel Kit with Victron SmartSolar MPPT 75/15
200w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4)
Highly efficient Black German Cells
Our flexible solar panel complete kit is suitable for many vehicle types, boats and off-grid applications.
Kit Contents
200w Semi-Flexible Durable Black Solar Panel 1500 x 680 x 4 mm
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 x 5m Black)
3 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
Aluminum reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminum fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminum reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Simple, professional installation:This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface.This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 5.85kg) which is great for all vehiclesHigh resistance to salt water environment (junction box and cables underneath are protected from contact with water) and possibility to walk on the panel make it perfect for boats and yachtsSealed waterproof design ensures the panel can be used in all weather conditionsJunction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting.Fitted with a single length of high quality 3m dual core cable for easy installation and wiring
Solar panel specifications:
Peak power: 200W
Maximum power voltage: 19.8V
Maximum power current: 10.10A
Open circuit voltage: 23.4V
Short circuit current: 10.71A
Power allowance range: +/- 5%
Solar Panel dimensions: 1500 x 680 x 4 mm
Junction Box diameter: 30 mm
Weight: 5.85 kg
1 x 3m high quality dual core solar cable attached (4mm2 cross section)
MPPT Specifications
The Victron 75V 15A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£138.99
100W 12V Solar Charging Kit With 10A Controller And 5M Cable
This kit includes:100W monocrystalline solar panel with 5m of solar cable and MC4 connectorsAdvanced 10A Photonic Universe solar charge controller 100W solar panel:The waterproof high efficiency Photonic Universe 100W monocrystalline solar panel included in this kit is perfect for permanent outdoor use to provide free electricity to charge a 12V battery to power hundreds of devices and electrical appliances.The long-lasting monocrystalline solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.The panel comes with 5m of special solar cable which can operate at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of the cable for easy connection to to other solar panels or 4mm extension cable. The MC4 connectors can also be cut off when wiring to the screw terminals of the 10A solar charge controller.Each individual solar panel is thoroughly tested to the highest quality standards, and labelled with a unique serial number for further quality control and increased warranty protection.10A solar charge controller:The kit includes a 10A Photonic Universe solar charge controller designed to protect batteries whilst charging them, having automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This solar controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below)The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. The controller is not waterproof and should be used indoors.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 100WMaximum power voltage: 19.3VMaximum power current: 5.18AOpen circuit voltage: 22.9VShort circuit current: 5.56APower allowance range: 0~+3%Dimensions: 1200 x 540 x 35 mmWeight: 8.5 kg4 mounting holes2 x 5m of high quality single core solar cable (4.0mm² cross section) with MC4 connectors attached Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty
...Read more
View Product
Out of Stock
£589.99
300w Large Solar Panel Kit with Victron Smartsolar MPPT
300w Large Solar Panel Kit with Victron Smartsolar MPPT
This 300w Rigid Solar Panel Kit for campervans, off-grid, motorhomes and yachts/boats includes a Victron SmartSolar MPPT 100/30 charge controller for maximum power output and battery charging efficiency. The ETFE covering makes the solar panel extremely durable and resistant. This 300w solar panel kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
300w solar panel kit including:
Monocrystalline Panel - Dimensions: 164 x 99 x 3.5 cmVictron 100/30 Smartsolar MPPT Solar Charge Controller2 x black 5m 6mm PV Solar Cable with MC4 Connectors2 x 5m (6mm) solar extension cables with MC4 connectors7 Piece ABS Plastic Solar Panel Mount Kit with Double Entry Roof Gland
This high efficiency 300W monocrystalline solar panel is one of the largest solar panels available on the market. It is perfect for permanent outdoor use to provide free electricity in any grid-tie, hybrid or off-grid application (such as charging batteries in vehicles or boats, or powering an off-grid house or cabin, or working with a grid-tie / hybrid inverter to feed energy into the electrical grid). Due to the size of the area that this solar panel covers it is great for large systems where the time and cost associated with fitting a high wattage array needs to be minimised.In order to achieve high output this solar panel uses innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel for the same power rating.On the back of the 300w solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.The panel is encased in a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. The waterproof design and non-corrosive materials ensure that the panel can be used in all weather conditions and locations, including marine applications where contact with sea water is likely.Each individual 300w solar panel is thoroughly tested to the highest quality standards, and labeled with a unique serial number for further quality control and increased warranty protection.
Specifications:
Peak power: 300W
Maximum power voltage: 32.70V
Maximum power current: 9.17A
Open circuit voltage: 39.80V
Short circuit current: 9.78A
Power tolerance: 0/+3%
Dimensions: 164 x 99 x 3.5 cm
Weight: 19 kg
Mounting holes for installation
2 x 1m of high quality single core solar cable 4.0mm² cross section
Male and female MC4 connectors
Features of the Victron SmartSolar MPPT 100/30:
Feature highlights• Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetoothenabled device• Ultra-fast Maximum Power Point Tracking (MPPT)• Advanced Maximum Power Point Detection in case of partial shading conditions• Load output on the small models• Battery Life: intelligent battery management by load shedding• Automatic battery voltage recognition• Flexible charge algorithm• Over-temperature protection and power de-rating when the temperature is high.
Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
Out of Stock
£579.99
250w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT
250w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/20 - (These kits are perfect for pop-top roofs)
Highly efficient Cells with a Durable ETFE Coating
This 250w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
250w Semi-Flexible Durable Solar Panel Dimensions: 1530 x 990 x 2.5
Victron Energy SmartSolar MPPT 100/20
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
Double entry Roof Gland
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
2 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar panel specifications:
Fully waterproof and light weight design at just 4.5kg
Low profile with a thickness of just 2mm
Semi-flexible with up to 20° flexibility
Attractive black finish with 1.5 metre cable
High-efficiency levels
2-year warranty
Strong ETFE coating:
In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.
Anti-reflective textured surface:
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter).
MPPT Specifications
The Victron 100/20 MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 20A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Other features:The Victron SmartSolar MPPT 100/20 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
Out of Stock
£879.99
270w Flexible Durable ETFE Solar Panel Kit with Victron SmartSolar MPPT 100/20
270w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/20 - (These kits are perfect for pop top roofs VW T6/T5/T4).
Highly efficient German Cells
This 270w Flexible Durable ETFE Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and efficient charging of your battery. The ETFE material of the solar panel makes it extremely durable and resistant to extreme weather conditions. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
270w Flexible Durable Solar Panel with ETFE Coating
Dimensions: 1595 x 1020 mm
Victron Energy SmartSolar MPPT 100/20
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
Cable Entry Roof Gland
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
3 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel
Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions
The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws)
The panel is incredibly light (only 5kg) and very thin (just 2mm) which is great for all vehicles
High resistance to salt water environments makes it perfect for boats and marine applications
The sealed waterproof design ensures it can be used in all weather conditions
Strong ETFE coating:
In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall.
High-quality 9-busbar solar cells:
This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited.
Anti-reflective textured surface:
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter).
Ease of connectivity:
The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system
Solar panel specifications:
Peak power: 270W
Maximum power voltage: 24.2V
Maximum power current: 11.16A
Open circuit voltage: 28.6V
Short circuit current: 11.83A
Dimensions: 1940 x 710 x 2 mm
Weight: 5.00 kg
MPPT Specifications
The Victron 100V 20A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent battery life function.Ultrafast MPPT Technology:This 20A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high-speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 100/20 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
£291.99
110Ah Leisure Battery, 90W Solar Panel Kit with Charge Controller, Cable and Brackets
Package consists of 1x XV110 (Titanium), 1x SCC075010060R, 1x SPM040901200, 1x SCA000500000 & 1x Z Bracket & 1 x Roof Gland
Titanium XV110 Dual Purpose Leisure Battery
This heavy duty deep cycle battery is designed to meet the needs of leisure and marine vehicles. With its sealed calcium construction which makes it 100% maintenance free this battery is fast becoming a favourite within the industry.
This range is suited to seasonal use such as Caravans Motorhomes Boats RV Camping and much more.
The product is supplied charged and ready to fit.
Features
Excellent design handle – Easy battery replacement
Integrated computer designed and reinforced container – Protection from vibrations and impact
Sealed covers – Prevents acid leaks and minimizes gassing
Totally sealed and spill proof
Maintenance Free – no topping up required
Glass fibre separators
Safety venting system
Sealed water recombination system
Tough polypropylene case design
Victron Energy SmartSolar MPPT 75/10
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Features
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.
Programmable battery charge algorithm
See the software section on our website for details
Day/night timing and light dimming option
See the software section on Victron for details
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
Victron Energy Solar Panel 12V 90W Mono series 4a
Low voltage-temperature coefficient enhances high-temperature operation.
Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
25-Year limited warranty on power output and performance.
5-Year limited warranty on materials and workmanship.
Sealed, waterproof, multi-functional junction box gives high level of safety.
High performance bypass diodes minimize the power drop caused by shade.
Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.
Victron Energy Solarcable L=5m/4sqmm MC4-M/F
5m/4spmm MC4-M/F of Solarcable
Z Bracket Mounting Aluminium Fixing Set
These brackets are made from 2mm aluminium
Included:
4x Z-Shape Tabbed Solar Panel Brackets
8x Stainless Steel Self Tapping Screws
4x Stainless Steel Spring Washers
4x Stainless Steel Short Bolts
4x Stainless Steel Washers
4x Stainless Steel Nuts
Brand
Titanium & Victron Energy
Manufacturer Part Number
XV110 (Titanium), SCC075010060R, SPM040901200, SCA000500000 and Z Bracket
Battery Voltage
12V
Battery Capacity (C20)
110Ah
Battery Cold Cranking
800CCA
Terminal Type
A, Standard Automotive
Terminal Layout
Right Hand Positive
Battery Dimensions (Including Terminals)
L354 x W174 x H190mm
Battery Weight
23.8Kg
Battery Warranty
4 Years
Battery Technology
Sealed Calcium
Battery Application
Dual Purpose
MPPT Voltage
12/24V
Rated Charge Current
10A
Nominal PV Power, 12V
145W
Max. PV Short Circuit Current
13A
Max. PV Open Circuit Voltage
75V
Protection Category
IP43 (electronic components), IP22 (connection area)
Efficiency
98%
MPPT Dimensions
H100 x W113 x D40mm
MPPT Weight
0.5Kg
MPPT Warranty
5 Years
MPPT Country of Manufacture
India
Solar Panel Voltage
12V
Nominal Power
90W
Cell Type
Monocrystalline
Number of Cells in Series
36
Maximum System Voltage
1000V
Solar Panel Dimensions
L780 x W668 x D30mm
Solar Panel Weight
6.1Kg
Solar Panel Warranty
5 Years
Solar Panel Country of Manufacture
China
Cable Length
5m
Cable Thickness
4sqmm
Cable Country of Manufacture
China
...Read more
View Product
Out of Stock
£407.99
120w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15
120w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4)
Highly efficient Black German Cells
This 120w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
ns.
Kit Contents
120w Semi-Flexible Durable Black Solar Panel - dimensions: 1000 x 665 x 4 mm
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
2 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
Aluminum reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminum fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminum reinforcement, the surface of this 180W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Simple, professional installation:This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface.This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 5kg) which is great for all vehiclesHigh resistance to salt water environment (junction box and cables underneath are protected from contact with water) and possibility to walk on the panel make it perfect for boats and yachtsSealed waterproof design ensures the panel can be used in all weather conditionsJunction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting.Fitted with a single length of high quality 3m dual core cable for easy installation and wiring
Solar panel specifications:
Peak power: 120W
Maximum power voltage: 20.2V
Maximum power current: 5.94A
Open circuit voltage: 23.9V
Short circuit current: 6.30A
Power allowance range: +/- 5%
Solar Panel dimensions: 1000 x 665 x 4 mm
Junction Box diameter: 30 mm
Weight: 4.30 kg
1 x 3m high quality dual core solar cable attached (4mm cross section)
MPPT Specifications
The Victron 75V 15A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
£325.49
Victron 185W Mono Solar Panel Kit with SmartSolar MPPT 75/15, Solar cable and Mounts
This 185w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency.This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
Victron Energy Solar Panel 12V 185W Mono series 4a
Low voltage-temperature coefficient enhances high-temperature operation.
Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
25-Year limited warranty on power output and performance.
5-Year limited warranty on materials and workmanship.
Sealed, waterproof, multi-functional junction box gives high level of safety.
High performance bypass diodes minimize the power drop caused by shade.
Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.
Victron Energy SmartSolar MPPT 75V 15A
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Features
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.
Programmable battery charge algorithm
See the software section on our website for details
Day/night timing and light dimming option
See the software section on Victron for details
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
Victron Energy Solarcable L=5m/4sqmm MC4-M/F
5m/4spmm MC4-M/F of Solarcable
Z Bracket Mounting Aluminium Fixing Set
These brackets are made from 2mm aluminium
Included:
4x Z-Shape Tabbed Solar Panel Brackets
8x Stainless Steel Self Tapping Screws
4x Stainless Steel Spring Washers
4x Stainless Steel Short Bolts
4x Stainless Steel Washers
4x Stainless Steel Nuts
Brand
Victron Energy
Manufacturer Part Number
SPM041851200, SCC075015060R, 2x SCA000500000 and Z Bracket
Solar Panel Voltage
12V
Nominal Power
175W
Cell Type
Monocrystalline
Number of Cells in Series
36
Maximum System Voltage
1000V
Solar Panel Dimensions
L1485 x W668 x D30mm
Solar Panel Weight
11Kg
Solar Panel Country of Manufacture
China
MPPT Voltage
12/24V
Rated Charge Current
15A
Nominal PV Power, 12V
220W
Max. PV Short Circuit Current
15A
Max. PV Open Circuit Voltage
75V
Protection Category
IP43 (electronic components), IP22 (connection area)
Efficiency
98%
Bluetooth Enabled
Yes
MPPT Dimensions
H100 x W113 x D40mm
MPPT Weight
0.5Kg
MPPT Country of Manufacture
India
Cable Length
5m
Cable Thickness
4sqmm
Cable Country of Manufacture
China
Warranty
5 Years
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£290.99
Victron 130W Monocrystalline Solar panel kit with SmartSolar MPPT, Cables & MC4
130W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats
Panel sizes are 1200x668x30mm
This 130w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron Smartsolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• High performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads
Full Kit with Victron 130W Monocrystalline panel, optional plastic or aluminium mounting brackets, Cable entry Gland, Victron 75/15 Smartsolar MPPT charge controller, 10m of Black PV Cable (2 x 5m) & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cables with In-Line Fuse.
Mounts Optional:
6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets
Ideal for charging battery banks up to 250ah
This highly efficient Victron solar 130w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications.
Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances
The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions.
This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£494.99
Victron 185W Mono Solar panel kit with SmartSolar MPPT, AGM Battery & Accessories
185W Victron Energy Solar Panel Kit with 100ah AGM Battery and all Accessories
Panel sizes are 1485x668x30mm
This 185w Solar Panel Kit with 95ah AGM Battery and accessories is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• High-performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads
Full Kit Including:
Victron 185W Monocrystalline panelPlastic corner fixing brackets or Aluminium Z BracketsCable entry Gland, Victron SmartSolar Bluetooth enabled 75/15 MPPT5m of Black PV Cable & MC4 Connectors x 2Resettable Circuit BreakerFused Battery Cable100ah AGM BatteryVictron Battery Isolator Switch
This highly efficient Victron solar 185w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications.
The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions.
This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging of the battery.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£545.00
270w Black Flexible Durable ETFE Solar Panel Kit with Victron SmartSolar MPPT 100/20
270w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/20 - (These kits are perfect for pop top roofs VW T6/T5/T4).
Cable exits underneath the panel for a super-neat installation.
This 270w Flexible Durable ETFE Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and efficient charging of your battery. The ETFE material of the solar panel makes it extremely durable and resistant to extreme weather conditions. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
270w Flexible Durable Solar Panel with ETFE Coating
Dimensions: 1900 x 710mm
Victron Energy SmartSolar MPPT 100/20
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
3m of dual core cable
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
3 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel
Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions
The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws)
The panel is incredibly light (only 5kg) and very thin (just 2mm) which is great for all vehicles
High resistance to salt water environments makes it perfect for boats and marine applications
The sealed waterproof design ensures it can be used in all weather conditions
Strong ETFE coating:
In addition to the fibreglass reinforcement, the surface of this 270W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall.
Anti-reflective textured surface:
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter).
Ease of connectivity:
The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system
Solar panel specifications:
Peak power: 270W
Maximum power voltage: 24.2V
Maximum power current: 11.16A
Open circuit voltage: 28.6V
Short circuit current: 11.83A
Dimensions: 1900 x 710 x 2 mm
Weight: 5.00 kg
MPPT Specifications
The Victron 100V 20A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent battery life function.Ultrafast MPPT Technology:This 20A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high-speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 100/20 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£320.99
185w Solar Kit with Dual Battery Output MPPT Solar Charge Controller
Camper Van Solar Panel Kit
A dual-battery solar panel charging kit allows 2 separate batteries to be charged at the same time. Typically this is the leisure battery bank and the engine starter battery. A dual-battery solar panel charging kit allows you to leave your Motorhome/Campervan unattended for long periods without the worry of either your van's starter or leisure batteries going flat.
Included in the kit:
1 x Victron 185w Rigid Solar Panel1 x 20 amp Dual Output Dual Battery Solar Charge Controller1 x Mount Set ( White Plastic, Black Plastic or Z Brackets)2 x 10mm Battery Cables with 40A Fuse and Ring Terminals - 3m LongPair Of 5M Single Core Extension Cable Leads with MC4 Connectors1 x Double entry roof gland (Black or White)
Dual Battery Charging MPPT
This advanced 20A 12V/24V dual battery solar controller uses advanced MPPT technology to charge two independent batteries or battery banks. The main battery is charged at high power, while a secondary battery is given a trickle charge of up to 1A. This makes it a perfect solar controller for a campervan, motorhome, boat or any other system with 2 batteries (e.g. engine and leisure battery). The main battery will be charged with a majority of the power, whilst the second battery will be trickle charged to keep it topped up and ready for use.
Maximum Power Point Tracking (MPPT) Technology
MPPT technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined solar input power allowed for this controller is 260W for a 12V battery system or 520W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).
Full Range of Protection Functions:
This charge controller features a comprehensive set of electronic protection functions to prevent reverse current at night (from the battery back to the solar panel), over-charging, short circuit, reverse polarity and more. The solar controller case is water resistant to a rating of IP33 when installed, for protection against sprays of water at up to 60 degrees from vertical.
Advanced Battery Compatibility:
Unlike many other less advanced solar charge controllers, this model is 100% compatible with a broad range of battery types for the main battery, such as Gel, AGM, Lead-Acid Flooded, and Lithium (LiFePO4 or Li-NiCoMn) batteries.
Advanced System Functionality:
The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel, system voltage recognition based on secondary battery)
Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for the solar panel and each battery), battery state of charge, and accumulated charging energy
Easy to use buttons allow the user to manually select the battery type (sealed, flooded, gel or Lithium), change the temperature units, and reset the in-built counters (charging energy, min/max voltages)
When not in use, the system automatically goes into a low power mode, reducing standby consumption when there is no solar power available, such as when the vehicle is parked in a garage
Current limiting function (20A) allows the possibility of adding more solar panels to your solar system in the future
Victron Energy Solar Panel 12V 185W Mono series 4a – SPM041851200
Low voltage-temperature coefficient enhances high-temperature operation.
Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
25-Year limited warranty on power output and performance.
5-Year limited warranty on materials and workmanship.
Sealed, waterproof, multi-functional junction box gives high level of safety.
High performance bypass diodes minimize the power drop caused by shade.
Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.
Brand
Victron Energy
Manufacturer Part Number
SPM041851200
GTIN
8719076040361
Voltage
12V
Nominal Power
185W
Cell Type
Monocrystalline
Number of Cells in Series
36
Maximum System Voltage
1000V
Dimensions
L1485 x W668 x D30mm
Weight
11Kg
Warranty
5 Years
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
Out of Stock
£1,020.99
360w Pro Flexible Solar Panel Kit with Victron SmartSolar MPPT 100|30
360w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/30 - (These kits are perfect for pop top roofs)
Highly efficient German Cells with a Durable ETFE Coating
Our flexible solar panel complete kit is suitable for many vehicle types, boats, and off-grid applications.
Kit Contents
360w Semi-Flexible Durable Pro Solar Panel 2035 x 1020 x 2 mm
Victron Energy SmartSolar MPPT 100/30
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
Double entry Roof Gland (Black or white)
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
2 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
This high efficiency, waterproof 360W semi-flexible solar panel is the largest semi-flexible solar panel available on the UK market. It is perfect for permanent outdoor use to provide free electricity for charging 12V or 24V batteries to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners or even zipping.Product features:Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditionsRobust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel that can be walked onIncredibly light (only 6.82kg) and very thin (just 2mm) which is great for motorhome and caravan roofsHigh resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified.The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter).The fibreglass plastic used in this solar panel is very strong and durable. When the solar panel is mounted on to a rigid surface, it is possible to walk on the solar panel in soft shoes (to prevent accidental scratches), which makes it the perfect choice for mounting on a boat deck.The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 connectors which can be used for easy connectivity to your existing system, linking several panels together or for connecting 4mm extension cable.
Solar panel specifications:
Peak power: 360W
Maximum power voltage: 39.1V
Maximum power current: 9A
Open circuit voltage: 47.7V
Short circuit current: 9.0A
Dimensions: 2035 x 1020 x 2 mm
Weight: 6.82 kg
MPPT Specifications
This Victron 100V 30A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device.Ultrafast MPPT Technology:This 30A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse current, PV reverse polarity and battery reverse polarity. The internal temperature sensor also protects the battery from overheating and will activate power derating if excessive temperatures are detected. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery, as well as 30 day performance data. The user can also specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 100/30 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Inbuilt bluetooth- Max solar panel voltage: 100V- Max solar panel power: 440W (12V) / 880W (24V)- Temperature sensor for automatic compensation (-16mV °C resp. -32mV °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 10mA- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 186 x 130 x 70 mm- Mounting dimensions: 175 x 75 mm- Weight: 1.3kg- 4 x mounting holes for ease of installation
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
£165.99
60W 12V Waterproof Portable Folding Solar Charging Kit For Motorhome, Caravan, Boat
60w Portable Solar Panel
This complete 60W 12V folding portable solar charging kit includes:High efficiency 30W + 30W folding monocrystalline solar panelsAdvanced fully automated 10A solar charge controller with enhanced protection functionsAdjustable aluminium stand, handle and latches5m cable with a battery plug and a fuseBattery crocodile clips for ease of connectionStorage / protective caseInstallation manual This portable solar kit has several important features which make it a truly unique premium quality product:It is completely waterproof, including the solar charge controller fitted on the back (genuine IP67-waterproof solar controller), which means it is suitable for all weather conditionsThe high efficiency 30W + 30W folding monocrystalline solar panels are made of high quality German solar cellsThe protective bag is not just a dust cover - it's a sturdy protective case made with a layer of foam which prevents accidental damage to the frame and glassThe advanced fully automated 10A solar charge controller provides complete overcharge protection and supports several battery types with different charging parameters for maximum efficiency (sealed, gel, flooded batteries) We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This high quality, waterproof 60W portable folding solar kit is designed to provide free power for charging 12V batteries, for example in vehicles and boats (motorhome, caravan, camper, narrow boat, yacht etc) or any other systems with a 12V battery or battery bank. It comes with everything required for battery charging: an advanced 10A 12V solar charge controller, and 5m cable with a battery plug, fuse and crocodile clips. You can start using the kit immediately - simply connect it to your battery and find a well-lit area for the folding solar panels.The kit comes with a stand which is very easy to set up and adjust. A handle and latches ensure ease of storage and portability. The storage case included with the kit is made with a layer of foam, which will completely protect the glass and the frame and prevent any accidental damages. In addition, the corners of solar panels are protected by plastic which reduces the risk of damage and adds to the aesthetically pleasing design.The 10A waterproof solar charge controller included with the kit will protect your battery from over-charging (it controls the state of charge of your battery every second). The controller has many other protection functions, such as stopping reverse current at night (from the battery back to the solar panel), incorrect polarity and short circuit protection. Controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. PWM technology can also recover some lost battery capacity.In addition, the solar charge controller has a very high degree of water protection - IP67 (which means it's completely sealed), so it is absolutely safe to use this solar kit in all weather conditions.This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings. Requires a RS485 to RJ45 cable to extend from controller to the remote meter.2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users). Requires an RS485 to RJ45 cable to extend from controller to the Wi-Fi module.3) An RS485 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.The kit is suitable for sealed, gel and flooded 12V batteries: the solar charge controller allows battery type selection for maximum efficiency of charging.Solar panel specifications:Peak power: 60WMaximum power voltage: 17.5VMaximum power current: 3.4A (2 x 1.7A)Open circuit voltage: 21.6VShort circuit current: 3.6A (2 x 1.8A)Power allowance: +/- 3%Dimensions: 35 x 65 x 6cm (folded)Weight: 7.5kg
Advantages of Portable Solar
Portable solar panels have quickly become a popular option for those looking to harness the power of the sun while on the go. These panels offer a number of advantages over traditional, fixed solar panels, making them a great choice for a wide range of applications.
First and foremost, the most obvious advantage of portable solar panels is their portability. They can easily be transported and set up wherever you need them, which makes them ideal for camping, RVing, boating, and other outdoor activities. This portability allows you to harness the power of the sun no matter where you are, providing you with reliable and sustainable power sources.
Another major advantage of portable solar panels is that they are easy to install. Unlike traditional, fixed solar panels, which often require professional installation, portable solar panels can be set up by just about anyone. This makes them a great option for people who are on a tight budget, or who want to avoid the hassle of professional installation.
In addition to being portable and easy to install, portable solar panels are also highly efficient. They use advanced technology to track the sun and optimize power output, which helps to ensure that they are producing as much power as possible. This efficiency means that even small portable solar panels can produce enough power to meet the needs of most portable devices, making them a great choice for powering laptops, tablets, and other electronic devices.
Lastly, portable solar panels are also very cost-effective. They are often less expensive than traditional, fixed solar panels, which can make them an attractive option for people who are on a tight budget.
Overall, portable solar panels are an excellent choice for anyone looking to harness the power of the sun while on the go. They are portable, easy to install, highly efficient, and cost-effective, making them a great choice for a wide range of applications. Whether you're camping in the wilderness, boating on the open water, or just looking for an alternative power source, portable solar panels are a great option to consider.
...Read more
View Product
Out of Stock
£363.99
Victron 150W Monocrystalline Solar panel kit with BlueSolar MPPT, Mounts, Cables & MC4
150W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats
Panel sizes are 112 x 67 x 3.5 cm
This 150w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron BlueSolar MPPT 75/10 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• High performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads
Full Kit with Victron 150W Monocrystalline panel, plastic or alumminum mounting brackets, Cable entry Gland, Victron BlueSolar 75/10 MPPT charge controller, 10m of Black PV Cable & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cables with In-Line Fuse.
Mounts available:
6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets
Ideal for charging battery banks up to 250ah
This highly efficient Victron solar 150w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications.
Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances
The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions.
This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
£855.99
370W Mono Solar panel kit with SmartSolar MPPT, AGM Batteries & Accessories
370W Victron Energy Solar Panel Kit with 200ah AGM Batteries and all Accessories
Panel sizes are 1485x668x30mm
This large 370w Rigid Solar Panel Kit with 190ah AGM Batteries and all accessories is designed for off-grid, campervans, motorhomes, and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and battery charging efficiency. The ETFE covering makes the solar panel extremely durable and resistant. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• High-performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads
Full Kit Including:
Victron 185W Monocrystalline panels x 2Plastic corner fixing brackets x2 or Aluminium Z Brackets x 8Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/20 MPPT5m of Black PV Cable & MC4 Connectors x2Resettable Circuit Breaker 50ampFused Battery Cable100ah AGM Battery x 2Victron Battery Isolator Switch25mm Battery cable 2m (Red & Black) x 2
This highly efficient Victron solar 370w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications.
The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions.
This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging of the battery.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
Out of Stock
£604.99
330w Premium Large Solar Panel Kit with Victron Smartsolar MPPT
330w Premium Large Solar Panel Kit with Victron Smartsolar MPPT perfect for Campervan Off-Grid Living
This large 330w Rigid Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and battery charging efficiency. The ETFE covering makes the solar panel extremely durable and resistant. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
330w Premium Solar panel kit including:
Sharp NU-JC Monocrystalline Panel - Dimensions - 1684 x 1002 x 40mmVictron 100/30 Smartsolar MPPT Solar Charge Controller2 x black 5m 6mm PV Solar Cable with MC4 Connectors7 Piece ABS Plastic Solar Panel Mount Kit with Double Entry Roof Gland or Z-Brackets1 x Ressetable Circuit Breaker1 x MPPT to Battery cable set with in-line fuse.
This MCS-certified panel is perfect for a wide variety of applications, from grid-tie household systems to off-grid installations where mains power is limited or unavailable such as boats, caravans, campervans, cabins or glamping huts. These high-power panels are ideal for large systems where the time and expense of fitting a high-wattage array needs to be minimised.
High-efficiency solar cells use PERC technology with 5 busbars to extract more power from a smaller surface area, increasing the output of the panel without increasing the size. Half-cut cell construction decreases internal losses, reduces risk of hotspots and improves performance in shaded conditions.
The robust design of the panel is IP68 (waterproof) rated, and tested for resistance against PID, salt mist, ammonia, heavy snow, dust and sand. This thorough testing ensures a long service life even in harsh marine or wilderness conditions. A pair of male/female MC4 connectors are crimped on the end of the cable for easy waterproof connection to other solar panels, extension leads or your existing system.
With a 15-year workmanship guarantee and 25-year output guarantee, you can be confident in the quality, durability and longevity of this premium solar panel.
Features of the Victron SmartSolar MPPT 100/30:
Feature highlights• Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetoothenabled device• Ultra-fast Maximum Power Point Tracking (MPPT)• Advanced Maximum Power Point Detection in case of partial shading conditions• Load output on the small models• Battery Life: intelligent battery management by load shedding• Automatic battery voltage recognition• Flexible charge algorithm• Over-temperature protection and power de-rating when temperature is high.
Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
Out of Stock
£378.99
160W 12V Reinforced Semi-Flexible Solar Charging Kit
This high efficiency semi-flexible 160W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:160W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)Advanced 20A solar charge controller with LCD display and powerful 2.4A dual USB outputA pair of 5m 4mm² single core solar extension cables with MC4 connectors5m of 4mm² dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminals 160W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 160W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 5.75kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 1m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.20A Solar charge controller:The kit includes a 20A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc.The LCD display shows information regarding real time solar panel and battery performance, including: voltage, current, battery state of charge, and battery temperature. An energy statistics counter also displays the accumulated daily and monthly charge values (useful for comparing solar panel performance between different periods).This solar charge controller also offers the rare and highly sought-after feature of a dual USB charging output. These 5V USB ports have a total combined output of 2.4A, offering fast and powerful charging of USB compatible devices such as mobile phones, tablets, mp3 players etc.An optional 12V load (e.g. 12V lighting / fans) may also be connected directly to the solar charge controller, with various settings for night time lighting applications. In addition, this controller also offers various charging programs for different battery types, which can be easily selected by the user. In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4mm² cross section) and 5m of 4mm² dual core battery cable fitted with a fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 160WMaximum power voltage: 20.2VMaximum power current: 7.92AOpen circuit voltage: 23.9VShort circuit current: 8.40APower allowance range: +/- 5%Solar Panel Dimensions: 1365 x 665 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 5.75 kg2 x 1m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Fully automated operation and auto 12/24V selectionRated charge/discharge current: 20AMaximum solar panel input power: 320W (12V) / 640W (24V)Maximum solar panel input voltage 50VTemperature sensor for automatic compensation: -3mV/C/2V (25C)Working temperature: -25ºC to +55ºCSelf-consumption: max. ≤9.2mA (12V); ≤11.7mA (24V)3 pairs of terminals (solar, battery, optional load)Terminals for wire up to 10mm2Multiple mounting holes for ease of installationSize: 16 x 9.5 x 5 cmWeight: 350 g Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The panel is covered by a 1 year repair or replacement warranty provided by Photonic Universe. In the unlikely event that a defect is found and confirmed during this period, we guarantee that we will repair or replace all defective items. The solar charge controller is covered by a 2 year manufacturer warranty. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.
...Read more
Out of Stock
£375.99
100w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15
100w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4)
Highly efficient Black German Cells
This 100w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller (with Bluetooth) ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications..
Kit Contents
100w Semi-Flexible Durable Black Solar Panel - dimensions: 840x 665 x 4 mm
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Red & Black)
2 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
Aluminum reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminum fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminum reinforcement, the surface of this 180W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Simple, professional installation:This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface.This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 5kg) which is great for all vehiclesHigh resistance to salt water environment (junction box and cables underneath are protected from contact with water) and possibility to walk on the panel make it perfect for boats and yachtsSealed waterproof design ensures the panel can be used in all weather conditionsJunction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting.Fitted with a single length of high quality 3m dual core cable for easy installation and wiring
Solar panel specifications:
Peak power: 100W
Maximum power voltage: 20.2V
Maximum power current: 4.95A
Open circuit voltage: 23.9V
Short circuit current: 5.25A
Power allowance range: +/- 5%
Solar Panel dimensions: 840x 665 x 4 mm
Junction Box diameter: 30 mm
Weight: 3.60 kg
1 x 3m high quality dual core solar cable attached (4mm cross section)
MPPT Specifications
The Victron 75V 15A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
£128.99
60W 12V Solar Charging Kit With 10A Controller And 5M Cable (German Solar Cells)
We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.60W solar panel:This high efficiency, waterproof 60W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 60WMaximum power voltage: 20.2VMaximum power current: 2.97AOpen circuit voltage: 23.9VShort circuit current: 3.16APower allowance range: +/- 3%Dimensions: 690 x 505 x 25 mmWeight: 4.9 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty
...Read more
View Product
£493.00
305w Large Solar Panel Kit with Victron Smartsolar MPPT
305w Large Solar Panel Kit with Victron Smartsolar MPPT - Perfect for Campervans, Caravans & Motorhomes
305w Victron Monocrystalline Solar panel kit including:Monocrystalline Panel - Dimensions: 1658 x 1002 x 35mmVictron 100/30 Smartsolar MPPT Solar Charge Controller2 x black 5m 6mm PV Solar Cable with MC4 Connectors4 x Z Bracket Mounts or 7 Piece ABS Plastic Solar Panel Mount Kit with Double Entry Roof Gland
1 x Resettable Circuit Breaker
1 x MPPT to Battery set of Cables with In-Line Fuse.
This high efficiency, 305w monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller.
The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.
Solar panel specifications:
Brand
Victron Energy
Manufacturer Part Number
SPM043052002
gtin
8719076057772
Voltage
20V
Nominal Power
305W
Cell Type
Monocrystalline
Number of Cells in Series
72
Maximum System Voltage
1000V
Dimensions
L1658 x W1002 x D35mm
Weight
19Kg
Warranty
5 Years
Features of the Victron SmartSolar MPPT 100/30:• Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetoothenabled device• Ultra-fast Maximum Power Point Tracking (MPPT)• Advanced Maximum Power Point Detection in case of partial shading conditions• Load output on the small models• Battery Life: intelligent battery management by load shedding• Automatic battery voltage recognition• Flexible charge algorithm• Over-temperature protection and power de-rating when temperature is high.Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Advantages of SolarSolar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£479.99
165w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT
165w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop-top roofs)
Highly efficient Cells with a Durable ETFE Coating
This 165w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
165w Semi-Flexible Durable Solar Panel Dimensions: 1500 x 660 x 2.5
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
Double entry Roof Gland
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
5-year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar panel specifications:
Fully waterproof and light weight design at just 3.2kg
Low profile with a thickness of just 2.5mm
Semi-flexible with up to 20° flexibility
Attractive black finish with 1.5 metre cable
High-efficiency levels
5-year warranty
Strong ETFE coating:
In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required.
Anti-reflective textured surface:
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter).
MPPT Specifications
The Victron 75/15 MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£303.99
Victron 100W Monocrystalline Solar panel kit with BlueSolar MPPT, Mounts, Cables & MC4
100W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats
Panel sizes are 845 x 670 x 30mm
This 100w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron BlueSolar MPPT 75/10 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• High performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads
Full Kit with Victron 100W Monocrystalline panel, plastic or aluminum mounting brackets, Cable entry Gland, Victron BlueSolar 75/10 MPPT charge controller, 10m of Black PV Cable & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cables with In-Line Fuse.
Mounts available:
6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets
Ideal for charging battery banks up to 250ah
This highly efficient Victron solar 100w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications.
Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances
The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions.
This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£975.99
330w Pro Flexible Solar Panel Kit with Victron SmartSolar MPPT 100/30
330w Semi -Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/30 - (These kits are perfect for pop top roofs)
Highly efficient German Cells with a Durable ETFE Coating
Our flexible solar panel complete kit is suitable for many vehicle types, boats, and off-grid applications.
Kit Contents
330w Semi-Flexible Durable Pro Solar Panel 2035 x 1020 x 2 mm
Victron Energy SmartSolar MPPT 100/30
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
Double entry Roof Gland (Black or White)
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
2 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
This high efficiency, waterproof 330W semi-flexible solar panel is the largest semi-flexible solar panel available on the UK market. It is perfect for permanent outdoor use to provide free electricity for charging 12V or 24V batteries to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners or even zipping.Product features:Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditionsRobust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel that can be walked onIncredibly light (only 6.82kg) and very thin (just 2mm) which is great for motorhome and caravan roofsHigh resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified.The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter).The fibreglass plastic used in this solar panel is very strong and durable. When the solar panel is mounted on to a rigid surface, it is possible to walk on the solar panel in soft shoes (to prevent accidental scratches), which makes it the perfect choice for mounting on a boat deck.The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 connectors which can be used for easy connectivity to your existing system, linking several panels together or for connecting 4mm extension cable.
Solar panel specifications:
Peak power: 330W
Maximum power voltage: 39.1V
Maximum power current: 8A
Open circuit voltage: 47.7V
Short circuit current: 9.0A
Dimensions: 1917 x 1020 x 2 mm
Weight: 6.82 kg
MPPT Specifications
This Victron 100V 30A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device.Ultrafast MPPT Technology:This 30A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse current, PV reverse polarity and battery reverse polarity. The internal temperature sensor also protects the battery from overheating and will activate power derating if excessive temperatures are detected. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery, as well as 30 day performance data. The user can also specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 100/30 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Inbuilt bluetooth- Max solar panel voltage: 100V- Max solar panel power: 440W (12V) / 880W (24V)- Temperature sensor for automatic compensation (-16mV °C resp. -32mV °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 10mA- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 186 x 130 x 70 mm- Mounting dimensions: 175 x 75 mm- Weight: 1.3kg- 4 x mounting holes for ease of installation
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£657.99
160w Flexible Solar Kit with Dual Battery Output MPPT Solar Charge Controller
A dual-battery solar panel charging kit allows 2 separate batteries to be charged at the same time. Typically this is the leisure battery bank and the engine starter battery. A dual-battery solar panel charging kit allows you to leave your Motorhome/Campervan unattended for long periods without the worry of either your van's starter or leisure batteries going flat.
Included in the kit:
1 x 160w PRO High-Efficiency Flexible Solar Panel with 5-year warranty1 x 20 amp Dual Output Dual Battery Solar Charge Controller1 x Roof Gland (Black or White)2 x 6mm Battery Cables with 40A Fuse and Ring Terminals - 3m Long1 x Pair Of 5M Single Core Extension Cable Leads with MC4 Connectors1 x Sikaflex 522
Dual Battery Charging MPPT
This advanced 20A 12V/24V dual battery solar controller uses advanced MPPT technology to charge two independent batteries or battery banks. The main battery is charged at high power, while a secondary battery is given a trickle charge of up to 1A. This makes it a perfect solar controller for a campervan, motorhome, boat or any other system with 2 batteries (e.g. engine and leisure battery). The main battery will be charged with a majority of the power, whilst the second battery will be trickle-charged to keep it topped up and ready for use.
Maximum Power Point Tracking (MPPT) Technology
MPPT technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined solar input power allowed for this controller is 260W for a 12V battery system or 520W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).
Full Range of Protection Functions:
This charge controller features a comprehensive set of electronic protection functions to prevent reverse current at night (from the battery back to the solar panel), over-charging, short circuit, reverse polarity and more. The solar controller case is water resistant to a rating of IP33 when installed, for protection against sprays of water at up to 60 degrees from vertical.
Advanced Battery Compatibility:
Unlike many other less advanced solar charge controllers, this model is 100% compatible with a broad range of battery types for the main battery, such as Gel, AGM, Lead-Acid Flooded, and Lithium (LiFePO4 or Li-NiCoMn) batteries.
Advanced System Functionality:
The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel, system voltage recognition based on secondary battery)
Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for the solar panel and each battery), battery state of charge, and accumulated charging energy
Easy to use buttons allow the user to manually select the battery type (sealed, flooded, gel or Lithium), change the temperature units, and reset the in-built counters (charging energy, min/max voltages)
When not in use, the system automatically goes into a low power mode, reducing standby consumption when there is no solar power available, such as when the vehicle is parked in a garage
Current limiting function (20A) allows the possibility of adding more solar panels to your solar system in the future
Solar Panel Specifications:
This high-efficiency, waterproof 160W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications. The panel is ideal for curved roofs on boats, caravans, motorhomes, RVs etc. because it can easily fit to the shape of the roof when mounted. This panel can be instantly fitted using the peelable adhesive backing attached to the panel, or can also be secured using self-tapping screws, tenax fasteners or even zipping (not supplied).
Product features:
Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions
Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel
Incredibly light (only 3.3kg) and very thin (just 2mm) which is great for motorhome and caravan roofs
High resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications
100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified
Peak power: 160W
Maximum power voltage: 18.2V
Maximum power current: 9A
Open circuit voltage: 22V
Short circuit current: 9.4A
Dimensions: 1434 x 699 x 2 mm
Weight: 3.3 kg
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
Out of Stock
£248.99
80W 12V Reinforced Narrow Semi-Flexible Solar Charging Kit
This high efficiency, semi-flexible 80W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:80W reinforced narrow semi-flexible solar panel with a durable ETFE coating (German solar cells)10A automatic solar charge controller with advanced connectivity optionsA pair of 5m 4mm single core solar extension cables with MC4 connectors5m of 4mm dual core battery cable 80W Reinforced narrow semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 80W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 3.05kg) which makes it an ideal option for all vehicle applications. The unique narrow design of this panel also makes it ideal for applications where space is restricted, or where there are obstructions on the roof. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 1m of cable with MC4 connectors at the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4mm cross section) and 5m of 4mm dual core battery cable for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 80WMaximum power voltage: 20.2VMaximum power current: 3.96AOpen circuit voltage: 23.9VShort circuit current: 4.20APower allowance range: +/- 5%Solar Panel Dimensions: 1365 x 350 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 3.05 kg2 x 1m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The panel and solar charge controller are covered by a 1 year workmanship warranty
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
Out of Stock
£168.99
50W 12V Reinforced Narrow Semi-Flexible Solar Charging Kit
This high efficiency semi-flexible 50W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:50W reinforced narrow semi-flexible solar panel with a durable ETFE coating (German solar cells)Advanced 10A solar charge controller with LCD display and powerful 2.4A dual USB outputA pair of 5m 4mm single core solar extension cables with MC4 connectors5m of 4mm dual core battery cable50W Reinforced narrow semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 50W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 2kg) which makes it an ideal option for all vehicle applications. The unique narrow design of this panel also makes it ideal for applications where space is restricted, or where there are obstructions on the roof. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 1m of cable with MC4 connectors at the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc.The LCD display shows information regarding real time solar panel and battery performance, including: voltage, current, battery state of charge, and battery temperature. An energy statistics counter also displays the accumulated daily and monthly charge values (useful for comparing solar panel performance between different periods).This solar charge controller also offers the rare and highly sought-after feature of a dual USB charging output. These 5V USB ports have a total combined output of 2.4A, offering fast and powerful charging of USB compatible devices such as mobile phones, tablets, mp3 players etc.An optional programmable load (e.g. 12V lighting / fans / water pumps) may also be connected directly to the solar charge controller. Using the buttons and LCD display, the user can set personalised On/Off timers for these appliances. In addition, this controller also offers various charging programs for different battery types, which can be easily selected by the user. In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4mm cross section) and 5m of 4mm dual core battery cable for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 50WMaximum power voltage: 20.2VMaximum power current: 2.48AOpen circuit voltage: 23.9VShort circuit current: 2.62APower allowance range: +/- 5%Solar Panel Dimensions: 880 x 350 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 2.00 kg2 x 1m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectorsCharge controller specifications:Fully automated operation and auto 12/24V selectionRated charge/discharge current: 10AMaximum solar panel input power: 160W (12V) / 320W (24V)Maximum solar panel input voltage 50VTemperature sensor for automatic compensation: -3mV/C/2V (25C)Working temperature: -25°C to +55°CSelf-consumption: max. ≤9.2mA (12V); ≤11.7mA (24V)3 pairs of terminals (solar, battery, optional load)Terminals for wire up to 4mm²Multiple mounting holes for ease of installationSize: 14.2 x 8.5 x 4.1 cmWeight: 220 gPlease note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The panel and solar charge controller are covered by a 1 year workmanship warranty
...Read more
Out of Stock
£468.99
300W 12V/24V Complete Solar Charging Kit With 20A Mppt Controller
This premium quality 300W 12V/24V solar charging kit is one of the most powerful solar charging kits for vehicles, boats or off-grid power systems. It can generate up to 17A charging current when charging a 12V battery, which means that a typical 100Ah battery will be charged from 0% to 100% in about 6 hours of bright sunlight.This 300W 12V/24V solar charging kit includes:High quality 300W monocrystalline solar panel fitted with 0.9m of 4.0mm solar cable and waterproof MC4 connectors20A 12V/24V high efficiency MPPT solar charge controller with an LCD displaySet of 4 corner plastic mounting brackets for bonding to the roofSet of 4 side mounting brackets for bonding to the roofWaterproof double entry cable gland5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel5m of 6.0mm dual core battery cable 300W monocrystalline solar panel:The high efficiency, waterproof 300W monocrystalline solar panel included in this kit has been manufactured to the highest standards. Each individual solar panel is thoroughly tested and labelled with a unique serial number for further quality control and increased warranty protection. It is ideal for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries.The panel is fitted with 2 x 0.9m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to the 5m single core extension cable supplied with the kit.20A MPPT solar charge controller:This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers.The controller features a comprehensive set of electronic protection functions such as stopping reverse current at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and protection against deep discharge, over voltage, over load, short circuit and reverse polarity. The LCD display shows various charging parameters such as voltage, current and power for the solar panel and the battery.Multiple connectivity options:This solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.The controller can automatically recognise 12V/24V battery systems. Note: in order to start the solar charge controller in the correct voltage mode, a working battery should always be connected to the controller first before connecting the solar panel.Additional items:This kit also includes 5m positive and negative extension leads for connecting the solar panel to the solar charge controller, a 5m 6.0mm dual core battery cable for use between the solar charge controller and your battery, a set of 4 corner and 4 side mounting brackets for fixing the solar panel to the roof using an appropriate sealant (not included) and a waterproof double cable entry gland for keeping the cable connection fully waterproof when mounting the panel outside and feeding the solar cables inside the vehicle / building / below deck.Solar panel specifications:Peak power: 300WMaximum power voltage: 32.70VMaximum power current: 9.17AOpen circuit voltage: 39.80VShort circuit current: 9.78APower tolerance: 0/+3%Dimensions: 164 x 99 x 3.5 cmWeight: 19 kgMounting holes for installation2 x 1m of high quality single core solar cable 4.0mm² cross sectionMale and female MC4 connectors Charge controller specifications:The most advanced MPPT technology to ensure high efficiency of your solar systemFully automated operation and auto 12V/24V charging voltage selection3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2Maximum solar panel voltage 100VMaximum solar panel power 260W (12V) / 520W (24V)Comprehensive electronic protectionSelf-consumption: less than 20mAWorking temperature: -25C to +45CSize: 17 x 14 x 4.5 cmWeight: 1.1 kgMultiple mounting holes for ease of installation Mounting accessory specifications:Material: plasticColour: whiteCable diameter for the cable gland: 3-7mmSize: each corner bracket 15 x15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cmCombined weight: 2.7kg Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The product is covered by a 1 year warranty. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.
...Read more
Out of Stock
£999.00
Fogstar & Victron - Starter Electrical Package - 105ah Lithium - 200w Solar - Optional DC to DC Charging
Electrical Campervan Starter Conversion Kit - Ideal for larger smaller vans such as a T5 / T6 / Transit Custom
Victron & Fogstar - the perfect combination
200w of Solar105ah Fogstar Drift Lithium BatteryOptional - Victron DC to DC charging kit
This starter electrical conversion kit is designed for the smaller van conversion. The combination of the large 105ah Lithium battery, 200w of solar and the battery-to-battery charging system will give you all of the off-grid independence you need.
Our kits can be expanded or altered as required so if this kit doesn't achieve exactly what you are looking for give us a ring for a friendly chat. Our free Campervan and Motorhome Electrical & Solar Design Service will ensure the kit you receive is exactly what's required.
Kit Contains:
Optional - Victron 18amp Orion DC to DC charging kit
200w Large Solar Panel Kit with Victron Smartsolar MPPT
Lithium Leisure Battery - Fogstar Drift 12v 105Ah12 V - 48 V Bus Bar Power Distribution Block with 4 x M8 Terminal Studs,100amp Mega Fuse ANLBattery Cable 25mm 170amp High-Quality Extra Flex Cable RedBattery Cable 25mm 170amp High-Quality Extra Flex Cable BlackBattery Crimp Cable Lugs 8mm Hole for 25mm Cable (Sold in 1's)Victron Energy - Battery switch ON/OFF 275A - VBS127010010Victron Energy Fuse holder for MEGA-fuse – CIP000100001Blue Sea 5026 BS5026 Fuse Block ST Blade 12 CircuitsBattery Cable 10mm 70 amp High-Quality Extra Flex Cable RedBattery Cable 10mm 70 amp High-Quality Extra Flex Cable BlackBattery Crimp Cable Lugs 8mm Hole for 10mm Cable (Sold in 1's)
...Read more
Out of Stock
£625.99
200w Flexible Lightweight Black Solar Panel Kit with Victron SmartSolar MPPT 75/15
200w Flexible Black Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4)
Highly efficient German Cells
This 200w Flexible Black Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
200w Flexible Durable Solar Panel with ETFE Coating
Dimensions: 1495. X 680
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
2 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel
Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions
The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws)
The panel is incredibly light (only 3.65kg) and very thin (just 2mm) which is great for all vehicles
High resistance to salt water environments makes it perfect for boats and marine applications
The sealed waterproof design ensures it can be used in all weather conditions
Strong ETFE coating:
In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall.
High-quality 9-busbar solar cells:
This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited.
Anti-reflective textured surface:
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter).
Ease of connectivity:
The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system
Solar panel specifications:
Peak power: 200W
Maximum power voltage: 17.6V
Maximum power current: 11.36A
Open circuit voltage: 20.8V
Short circuit current: 12.05A
Dimensions: 1495 x 680
Weight: 3.65 kg
MPPT Specifications
The Victron 75V 15A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
Out of Stock
£703.99
250W Mono Solar panel kit with SmartSolar MPPT, AGM Battery & Accessories
250W Victron Energy Solar Panel Kit with 100ah AGM Battery and all Accessories
Panel size: 139 x 99 x 4 cm
This highly efficient, 250W monocrystalline solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).
Low voltage-temperature coefficient enhances high-temperature operation.
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• High-performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• 5m pre-wired quick-connect system with MC4 (PV-ST01) connectors
Full Kit Including:
Victron 250W Monocrystalline panelPlastic corner fixing brackets or Aluminium Z BracketsCable entry Gland, Victron SmartSolar Bluetooth enabled 75/15 MPPT5m of Black PV Cable & MC4 Connectors x 2Resettable Circuit BreakerFused Battery Cable100ah AGM BatteryVictron Battery Isolator Switch
This highly efficient Victron solar 250w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications.
The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. A waterproof design ensures the panel can be used in all weather conditions.
This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging of the battery.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
Out of Stock
£478.99
160w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15
160w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4)
Highly efficient Black German Cells
This 160w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
160w Semi-Flexible Durable Black Solar Panel - dimensions: 1345 x 665 x 4 mm
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 x 5m of Black)
2 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
Aluminum reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminum fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminum reinforcement, the surface of this 180W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Simple, professional installation:This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface.This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 5kg) which is great for all vehiclesHigh resistance to salt water environment (junction box and cables underneath are protected from contact with water) and possibility to walk on the panel make it perfect for boats and yachtsSealed waterproof design ensures the panel can be used in all weather conditionsJunction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting.Fitted with a single length of high quality 3m dual core cable for easy installation and wiring
Solar panel specifications:
Peak power: 160W
Maximum power voltage: 20.2V
Maximum power current: 7.92A
Open circuit voltage: 23.9V
Short circuit current: 8.40A
Power allowance range: +/- 5%
Solar Panel dimensions: 1345 x 665 x 4 mm
Junction Box diameter: 30 mm
Weight: 5.70 kg
1 x 3m high quality dual core solar cable attached (4mm cross section)
MPPT Specifications
The Victron 75V 15A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
Out of Stock
£301.99
120W 12V Reinforced Semi-Flexible Solar Charging Kit
This high-efficiency semi-flexible 120W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:120W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)Advanced 10A solar charge controller with LCD display and powerful 2.4A dual USB outputA pair of 5m 4mm² single core solar extension cables with MC4 connectors5m of 4mm² dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminals 120W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 120W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 4.35kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 1m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc.The LCD display shows information regarding real time solar panel and battery performance, including: voltage, current, battery state of charge, and battery temperature. An energy statistics counter also displays the accumulated daily and monthly charge values (useful for comparing solar panel performance between different periods).This solar charge controller also offers the rare and highly sought-after feature of a dual USB charging output. These 5V USB ports have a total combined output of 2.4A, offering fast and powerful charging of USB compatible devices such as mobile phones, tablets, mp3 players etc.An optional 12V load (e.g. 12V lighting / fans) may also be connected directly to the solar charge controller, with various settings for night time lighting applications. In addition, this controller also offers various charging programs for different battery types, which can be easily selected by the user. In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4mm² cross section) and 5m of 4mm² dual core battery cable fitted with a fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 120WMaximum power voltage: 20.2VMaximum power current: 5.94AOpen circuit voltage: 23.9VShort circuit current: 6.30APower allowance range: +/- 5%Solar Panel Dimensions: 1025 x 665 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 4.35 kg2 x 1m of high quality single core solar cable (4mm cross² section)Male and female MC4 connectors Controller specifications:Fully automated operation and auto 12/24V selectionRated charge/discharge current: 10AMaximum solar panel input power: 160W (12V) / 320W (24V)Maximum solar panel input voltage 50VTemperature sensor for automatic compensation: -3mV/C/2V (25C)Working temperature: -25°C to +55°CSelf-consumption: max. ≤9.2mA (12V); ≤11.7mA (24V)3 pairs of terminals (solar, battery, optional load)Terminals for wire up to 4mm²Multiple mounting holes for ease of installationSize: 14.2 x 8.5 x 4.1 cmWeight: 220 g Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.The panel and charge controller are covered by a 1 year warranty. In the unlikely event that a defect is found and confirmed during this period, we guarantee that we will repair or replace all defective items. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
Out of Stock
£279.99
100W 12V Reinforced Semi-Flexible Solar Charging Kit
This high-efficiency semi-flexible 100W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:100W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)Advanced 10A solar charge controller with LCD display and powerful 2.4A dual USB outputA pair of 5m 4mm² single core solar extension cables with MC4 connectors5m of 4mm² dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminals 100W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 100W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 3.65kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 1m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc.The LCD display shows information regarding real time solar panel and battery performance, including: voltage, current, battery state of charge, and battery temperature. An energy statistics counter also displays the accumulated daily and monthly charge values (useful for comparing solar panel performance between different periods).This solar charge controller also offers the rare and highly sought-after feature of a dual USB charging output. These 5V USB ports have a total combined output of 2.4A, offering fast and powerful charging of USB compatible devices such as mobile phones, tablets, mp3 players etc.An optional 12V load (e.g. 12V lighting / fans) may also be connected directly to the solar charge controller, with various settings for night time lighting applications. In addition, this controller also offers various charging programs for different battery types, which can be easily selected by the user. In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4mm² cross section) and 5m of 4mm² dual core battery cable fitted with a fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 100WMaximum power voltage: 20.2VMaximum power current: 4.95AOpen circuit voltage: 23.9VShort circuit current: 5.25APower allowance range: +/- 5%Solar Panel Dimensions: 860 x 665 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 3.65 kg2 x 1m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Fully automated operation and auto 12/24V selectionRated charge/discharge current: 10AMaximum solar panel input power: 160W (12V) / 320W (24V)Maximum solar panel input voltage 50VTemperature sensor for automatic compensation: -3mV/C/2V (25C)Working temperature: -25°C to +55°CSelf-consumption: max. ≤9.2mA (12V); ≤11.7mA (24V)3 pairs of terminals (solar, battery, optional load)Terminals for wire up to 4mm²Multiple mounting holes for ease of installationSize: 14.2 x 8.5 x 4.1 cmWeight: 220 g Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year workmanship warranty
...Read more
Out of Stock
£279.99
200W 12V Solar Charging Kit With 20A Controller And 5M Cable (German Solar Cells)
we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.200W solar panel:This high efficiency, waterproof 200W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to to other solar panels, your existing system or 6mm extension cable (the MC4 connectors can also be cut off when wiring to the screw terminals of the solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.20A Solar charge controller:This kit includes a powerful 20A 12V/24V solar charge controller, which is designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 20A controller is the small size - only 16 x 8cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can handle up to 320W of solar power (12V system) or 640W of solar power (24V system), so the kit can be upgraded to increase the power output by adding more solar panels, without the need to buy a new controller.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 200WMaximum power voltage: 20.2VMaximum power current: 9.9AOpen circuit voltage: 23.9VShort circuit current: 10.52APower allowance range: +/- 3%Dimensions: 111 x 99.2 x 4 cmWeight: 13.3 kg8 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable (6.0mm cross section)Male and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 20AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 10mm2Size: 15.9 x 8.1 x 4.8 cmWeight: 300 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty
...Read more
£169.99
80W (40W+40W) Solar Charging Kit With 10A Controller And 2 X 5M Cables (German Solar Cells)
we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in these solar panels. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This kit includes:2 x 40W high efficiency waterproof monocrystalline solar panels, each with 5m cable and MC4 connectors10A Photonic Universe solar charge controller 2 x 40W solar panels:This 80W system is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).Each panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panels can be used in all weather conditions.These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Specifications (per solar panel):Peak power: 40WMaximum power voltage: 20.2VMaximum power current: 1.98AOpen circuit voltage: 23.9VShort circuit current: 2.10APower allowance range: +/- 3%Dimensions: 705 x 345 x 25mmWeight: 3.5 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty
Wiring guide for Solar Panel Kits in Series
...Read more
View Product
Out of Stock
£399.99
SunPower flexible Solar panel kit with Victron SmartSolar MPPT - 110W
SunPower flexible solar panel kit with Victron SmartSolar MPPT - 110W
High Power and Flexible suitable for curved roofs found on Caravans, Motorhomes, Campervans & Boats
Made with SunPowers highest power Gen II back contact cells, SunPowers flexible panels deliver the highest power output and the highest charging capacity in their product class. SunPowers panels are constructed with top-grade, light-weight polymer materials, allowing for easy transport, installation and panel flexing up to 30 degrees.
Designed for Toughness
The SunPower Maxeon® Solar Cell is the only cell built on a solid copper foundation. Flexible panels made with SunPower cells are resistant to power loss via cracking and corrosion, unlike conventional cells, which are much more likely to lose power when bent or subjected to a moist environment. SunPower flexible panels are the 1 choice for customers due of the combination of high power and cell ruggedness.
Easy and Low Cost Installation
Supplied with Victron 10a MPPT solar regulator , 5mtrs solar cable , cable entry gland and Sikaflex adhesive
SPR-E-Flex-110
Nominal power: 110 Watts
Power tolerance: +6 / -3 Watts
Vmp: 17.1 Volts
Voc: 21.4 Volts
Imp: 5.9 Amps
Isc: 6.3 Amps
Module efficiency: 18.8%
Dimensions: 45.9" x 21.9" x 0.8"
Weight: 4.4 lbs (2 kg)
Warranty (All models): 5 years limited power warranty of 80% of the minimum specified power rating.
Victron Energy Smart Solar Controller MPPT 75/10
Brand
Victron Energy
Manufacturer Part Number
SCC075010060R
Battery Voltage
12/24 Auto Select
Rated Charge Current
10A
Nominal PV Power, 12V
145W
Nominal PV Power, 24V
290W
Max. PV Short Circuit Current
13A
Maximum PV Open Circuit Voltage
75V
Efficiency
98%
Charge Algorithm
Multi-stage adaptive
Data Communication Port
VE.Direct
IP Rating
IP43 (electronic components), IP22 (connection area)
Dimensions
H100 x W113 x D40mm
Weight (kg)
0.5
Warranty
5 Years
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
£819.99
240w Flexible Durable ETFE Solar Panel Kit with Victron SmartSolar MPPT 100/20
240w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/20 - (These kits are perfect for pop top roofs VW T6/T5/T4).
Highly efficient German Cells
This 240w Flexible Durable ETFE Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and efficient charging of your battery. The ETFE material of the solar panel makes it extremely durable and resistant to extreme weather conditions. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
240w Flexible Durable Solar Panel with ETFE Coating
Dimensions: 1434 x 1020 x 2 mm
Victron Energy SmartSolar MPPT 100/20
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
Cable Entry Roof Gland
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
3 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel
Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions
The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws)
The panel is incredibly light (only 5kg) and very thin (just 2mm) which is great for all vehicles
High resistance to salt water environments makes it perfect for boats and marine applications
The sealed waterproof design ensures it can be used in all weather conditions
Strong ETFE coating:
In addition to the fibreglass reinforcement, the surface of this 240W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall.
Anti-reflective textured surface:
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter).
Ease of connectivity:
The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system
Solar panel specifications:
Peak power: 240W
Maximum power voltage: 27.6V
Maximum power current: 9A
Open circuit voltage: 33.1V
Short circuit current: 9.4A
Dimensions: 1434 x 1020 x 2 mm
Weight: 4.75 kg
MPPT Specifications
The Victron 100V 20A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent battery life function.Ultrafast MPPT Technology:This 20A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high-speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 100/20 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£899.00
500W Monocrystalline Solar kit with SmartSolar 100/50 MPPT, Mounts, Cables & MC4
500W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats (2 x 250w Panels)
This 500w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/50 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
Panel sizes are 1390x990x30mm
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• High-performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m extension leads
Full Kit with 2 * 250W Monocrystalline panels, 2 * mount sets (optional), Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/50 MPPT charge controller, 5m of Black PV Cable (x2) & MC4 Connectors.1 x Ressetable Circuit Breaker1 x MPPT to Battery cable set with in-line fuse
Mounts available (optional):
6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets
This highly efficient Victron solar 500w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications.
Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances
The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions.
This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
Wiring guide for Solar Panel Kits in Series
...Read more
View Product
Out of Stock
£504.99
150w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15
150w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs)
Highly efficient German Cells with a Durable ETFE Coating
This 150w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
150w Semi-Flexible Durable Solar Panel Dimensions: 1110 x 710 x 2 mm
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
Double entry Roof Gland
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
3-year warranty on the Solar Panel
5-year warranty on Victron MPPT
Solar panel specifications:
Peak power: 150W
Maximum power voltage: 19.8V
Maximum power current: 7.58A
Open circuit voltage: 23.4V
Short circuit current: 8.03A
Dimensions: 1110 x 710 x 2 mm
Weight: 2.85 kg
Product features:
Robust construction using plastic reinforced with glass fiber creates a sturdy and durable solar panel
Special textured surface significantly reduces light reflection and improves performance in low-light and cloudy conditions
The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws)
The panel is incredibly light (only 2.85kg) and very thin (just 2mm) which is great for all vehicles
High resistance to saltwater environments makes it perfect for boats and marine applications
The sealed waterproof design ensures it can be used in all weather conditions
Strong ETFE coating:
In addition to the fiberglass reinforcement, the surface of this 150W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall.
High-quality 9-busbar solar cells:
This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and can extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited.
Anti-reflective textured surface:
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter).
MPPT Specifications
The Victron 75V 15amp MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent BatteryLife function.Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
£414.99
100w SUNPOWER Flexible Solar Kit with Victron SmartSolar MPPT 75/15
100w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop-top roofs)
SUNPOWER & VICTRON - THE PERFECT COMBINATION - 5 YEAR WARRANTY!
This 100w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes, and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
100w SUNPOWER Semi-Flexible Durable Solar Panel
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
Double entry Roof Gland
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
5-year warranty on the Solar Panel
5-year warranty on Victron MPPT
Solar Panel Specifications:
Dimensions: 45.9"(L) x 21.9"(W) x 0.1"(W) (0.8" including J-Box)
Weight: 4.4lbs - Lightweight, Portable & Easy to Stow
Rated Voltage (Vmpp) 17.1V | Rated Current (Impp) 5.9A - Powerful
Flexible up to 30 degrees - Suitable for Irregular Surfaces
32 high efficiency (23%) monocrystalline Maxeon™ Gen II prime solar cells - More Power in Less Space
Premium cosmetic quality
Junction box with by-pass diode has IP67 protection- Robust Design, Water & Dust Proof!
17.7" long cables (12AWG) with PV4-S Connectors (MC4 compatible) - Reliable & Safe with IP68 Protection
6 x 316 Stainless steel grommets (5/16" I.D.) - Diverse Installation Options
5-Year power & 2-Year product warranty (no salt water exclusion) - Backed by SunPower
Solar cells are made in the Philippines. The panel is assembled in France
Individually packaged & protected for shipping. Includes safety & installation guide
Solar cells made in the Philippines
Solar panel assembled in France
MPPT Specifications
The Victron 75V 15amp MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£439.99
370w Solar Kit with Dual Battery Output MPPT Solar Charge Controller
A dual-battery solar panel charging kit allows 2 separate batteries to be charged at the same time. Typically this is the leisure battery bank and the engine starter battery. A dual-battery solar panel charging kit allows you to leave your Motorhome/Campervan unattended for long periods without the worry of either your van's starter or leisure batteries going flat.
Included in the kit:
2 x Victron 185w Rigid Solar Panels1 x 30 amp Dual Output Dual Battery Solar Charge Controller2 x Mount Set ( White Plastic, Black Plastic or Z Brackets)2 x 10mm Battery Cables with 40A Fuse and Ring Terminals - 3m Long1 x 5m (6mm) Solar extension cables with MC4 Connectors
Dual Battery Charging MPPT
This advanced 30A 12V/24V dual battery solar controller uses advanced MPPT technology to charge two independent batteries or battery banks. The main battery is charged at high power, while a secondary battery is given a trickle charge of up to 1A. This makes it a perfect solar controller for a campervan, motorhome, boat or any other system with 2 batteries (e.g. engine and leisure battery). The main battery will be charged with a majority of the power, whilst the second battery will be trickle charged to keep it topped up and ready for use.
Maximum Power Point Tracking (MPPT) Technology
MPPT technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined solar input power allowed for this controller is 390W for a 12V battery system or 780W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).
Full Range of Protection Functions:
This charge controller features a comprehensive set of electronic protection functions to prevent reverse current at night (from the battery back to the solar panel), over-charging, short circuit, reverse polarity and more. The solar controller case is water resistant to a rating of IP33 when installed, for protection against sprays of water at up to 60 degrees from vertical.
Advanced Battery Compatibility:
Unlike many other less advanced solar charge controllers, this model is 100% compatible with a broad range of battery types for the main battery, such as Gel, AGM, Lead-Acid Flooded, and Lithium (LiFePO4 or Li-NiCoMn) batteries.
Advanced System Functionality:
The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel, system voltage recognition based on secondary battery)
Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for the solar panel and each battery), battery state of charge, and accumulated charging energy
Easy to use buttons allow the user to manually select the battery type (sealed, flooded, gel or Lithium), change the temperature units, and reset the in-built counters (charging energy, min/max voltages)
When not in use, the system automatically goes into a low power mode, reducing standby consumption when there is no solar power available, such as when the vehicle is parked in a garage
Current limiting function (30A) allows the possibility of adding more solar panels to your solar system in the future
Victron Energy Solar Panels 12V 185W Mono series 4a – SPM041851200
Low voltage-temperature coefficient enhances high-temperature operation.
Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
25-Year limited warranty on power output and performance.
5-Year limited warranty on materials and workmanship.
Sealed, waterproof, multi-functional junction box gives high level of safety.
High performance bypass diodes minimize the power drop caused by shade.
Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.
Brand
Victron Energy
Manufacturer Part Number
SPM041851200
GTIN
8719076040361
Voltage
12V
Nominal Power
185W
Cell Type
Monocrystalline
Number of Cells in Series
36
Maximum System Voltage
1000V
Dimensions
L1485 x W668 x D30mm
Weight
11Kg
Warranty
5 Years
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
Out of Stock
£448.99
160W (80W+80W) 12V Reinforced Narrow Semi-Flexible Solar Charging Kit
This high efficiency semi-flexible 160W (80W + 80W) solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:2 x 80W reinforced narrow semi-flexible solar panels with a durable ETFE coating (German solar cells)20A automatic solar charge controller with advanced connectivity optionsA pair of 5m 4mm single core solar extension cables with MC4 connectors5m of 4.0mm double core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminalsA pair of T-branch MC4 connectors, for connecting the panels in parallel 2 x 80W Reinforced narrow semi-flexible solar panels:These reinforced semi-flexible solar panels have a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within each solar panel. This additional reinforcement offers greater strength and resilience, making them amongst the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of these 80W semi-flexible solar panels is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of these panels creates an anti-reflective surface which allows the panels to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in these solar panels have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of these panels makes them ideal for curved roofs and surfaces where bonding is preferable (though the panels can also be fixed by bolts or screws). The panels are also incredibly light (only 3.05kg each) which makes them an ideal option for all vehicle applications. The unique narrow design also make them ideal for applications where space is restricted, or where there are obstructions on the roof. The panels are also highly resistant to salt water environments and it is also possible to walk on the panels, making them the perfect choice for boats and yachts.The panels are fitted with 2 x 1m of cable with MC4 connectors on the end.20A Solar charge controller:The kit includes a 20A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 320W (12V battery) / 640W (24V battery) of solar power input, which makes it ideal for future systm expansion.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit includes 5m positive and negative 4.0mm solar extension leads for connecting the solar panels to the solar charge controller, and a 5m 4.0mm dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panels and the battery 1m + 5m + 5m = 11m.A pair of T-branch MC4 connectors is also provided, in order to connect these panels in parallel (Click on the Installation tab for further details).Specifications (per solar panel):Peak power: 80WMaximum power voltage: 20.2VMaximum power current: 3.96AOpen circuit voltage: 23.9VShort circuit current: 4.20APower allowance range: +/- 5%Solar Panel Dimensions: 1365 x 350 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 3.05 kg2 x 1m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Rated current 20AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 10mm2Size: 15.9 x 8.1 x 4.8 cmWeight: 300 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.The panels are covered by a 1 year repair or replacement warranty provided by Photonic Universe. We will repair or replace defective items at our discretion. The solar controller is covered by a 1 year manufacturer warranty. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.
Wiring guide for Solar Panel Kits in Series
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
Out of Stock
£388.99
160W 12V Reinforced Semi-Flexible Dual Battery Solar Charging Kit
This high-efficiency semi-flexible 160W dual battery solar charging kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:160W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)20A 12V dual battery solar charge controller for independent charging of 2 batteries or battery banks (can work with a single battery too)A pair of 5m 4.0mm² single core extension cables with MC4 connectors5m of 4.0mm² dual core battery cable 160W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 160W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 5.75kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 1m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.20A Dual battery controller:The kit includes a 20A 12V/24V dual battery solar charge controller designed to charge and protect two batteries independently, with automatic cut off to prevent over-charging. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your batteries. PWM technology can also recover some lost battery capacityThis is a perfect solar controller for a caravan / camper van / boat or another system with two batteries (e.g. engine and leisure battery) or battery banks. You can set the initial charging priority e.g. 80% power to go to the engine battery and 20% to leisure battery. When one of the batteries is fully charged the controller will automatically divert all power to the other battery.Can the unit work with only one battery? Yes, absolutely! The controller will determine automatically if there's only one battery connected and will pass 100% of charging current to this battery. You can add a second battery later.The unit has numerous safety functions, including protection against reverse current at night (from the battery back to the solar panel), over charge, short circuit, reverse polarity etc. Other features include various LED indicators, battery type selection (sealed, gel, flooded) and an RJ-45 socket for an optional remote LCD meter with 10m cable.A built-in temperature sensor allows the controller to optimise the charging process depending on the ambient temperature. If you are planning to position the controller far away from the battery, or if the battery and the controller are exposed to different ambient temperatures, an external remote temperature sensor with 3m cable is recommended for this dual battery solar charge controller. To enable connection to the screw terminals of the controller, the green connector block on the end of the remote temperature sensor cable should be cut off.The solar charge controller is compatible with sealed, gel and flooded lead acid batteries.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4.0mm² cross section) and 5m of 4.0mm² dual core battery cable for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 160WMaximum power voltage: 20.2VMaximum power current: 7.92AOpen circuit voltage: 23.9VShort circuit current: 8.40APower allowance range: +/- 5%Solar Panel Dimensions: 1365 x 665 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 5.75 kg2 x 1m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Rated charging current 20AFully automated operation and auto 12/24V selection3 pairs of terminals (input, battery 1, battery 2)LEDs to indicate state of chargeTemperature sensor for temperature compensation of charging (-30mV/C/12V)RJ-45 connection point for a remote meter (not included)Various protection features (over charge, short circuit, reverse polarity etc)Self-consumption: 4mA at night, 10mA when chargingWorking temperature: -35C to +55CTerminals for wire up to 4.0mm2Size: 15.5 x 7.6 x 4.0 cmWeight: 230 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year workmanship warranty. We will repair or replace defective items at our discretion. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase.
...Read more
£288.99
100W (50W+50W) 12V Reinforced Narrow Semi-Flexible Dual Battery Solar Charging Kit
This high efficiency semi-flexible 100W (50W + 50W) dual battery solar charging kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:2 x 50W reinforced narrow semi-flexible solar panels with a durable ETFE coating (German solar cells)10A 12V dual battery solar charge controller for independent charging of 2 batteries or battery banks (can work with a single battery too)A pair of 5m 4.0mm thick single core extension cables with MC4 connectors2 x 5m 4.0mm dual core battery cables with a fuse holder, 10A fuse and 8mm ring terminalsA pair of T-branch MC4 connectors, for connecting the panels in parallel 2 x 50W Reinforced narrow semi-flexible solar panels:These reinforced semi-flexible solar panels have a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within each solar panel. This additional reinforcement offers greater strength and resilience, making them amongst the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of these 50W semi-flexible solar panels is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of these panels creates an anti-reflective surface which allows the panels to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in these solar panels have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of these panels makes them ideal for curved roofs and surfaces where bonding is preferable (though the panels can also be fixed by bolts or screws). The panels are also incredibly light (only 2kg each) which makes them an ideal option for all vehicle applications. The unique narrow design also make them ideal for applications where space is restricted, or where there are obstructions on the roof. The panels are also highly resistant to salt water environments and it is also possible to walk on the panels, making them the perfect choice for boats and yachts.The panels are fitted with 2 x 90cm of cable with MC4 connectors on the end.10A Dual battery controller:The kit includes a 10A 12V/24V dual battery solar charge controller designed to charge and protect two batteries independently, with automatic cut off to prevent over-charging. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your batteries. PWM technology can also recover some lost battery capacityThis is a perfect solar controller for a caravan / camper van / boat or another system with two batteries (e.g. engine and leisure battery) or battery banks. You can set the initial charging priority e.g. 80% power to go to the engine battery and 20% to leisure battery. When one of the batteries is fully charged the controller will automatically divert all power to the other battery.Can the unit work with only one battery? Yes, absolutely! The controller will determine automatically if there's only one battery connected and will pass 100% of charging current to this battery. You can add a second battery later.The unit has numerous safety functions, including protection against reverse current at night (from the battery back to the solar panel), over charge, short circuit, reverse polarity etc. Other features include various LED indicators, battery type selection (sealed, gel, flooded) and an RJ-45 socket for an optional remote LCD meter with 10m cable.A built-in temperature sensor allows the controller to optimise the charging process depending on the ambient temperature. If you are planning to position the controller far away from the battery, or if the battery and the controller are exposed to different ambient temperatures, an external remote temperature sensor with 3m cable is recommended for this dual battery solar charge controller. To enable connection to the screw terminals of the controller, the green connector block on the end of the remote temperature sensor cable should be cut off.The solar charge controller is compatible with sealed, gel and flooded lead acid batteries.Additional items:The kit includes 5m positive and negative 4.0mm solar extension leads for connecting the solar panels to the solar charge controller, and a 5m 4.0mm dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panels and the battery 1m + 5m + 5m = 11m.A pair of T-branch MC4 connectors is also provided, in order to connect these panels in parallel (Click on the Installation tab for further details).Specifications (per solar panel):Peak power: 50WMaximum power voltage: 20.2VMaximum power current: 2.48AOpen circuit voltage: 23.9VShort circuit current: 2.62APower allowance range: +/- 5%Solar Panel Dimensions: 880 x 350 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 2.00 kg2 x 90cm of high quality single core solar cable (2.5mm² cross section)Male and female MC4 connectors Charge controller specifications:Rated charging current 10AFully automated operation and auto 12/24V selection3 pairs of terminals (input, battery 1, battery 2)LEDs to indicate state of chargeTemperature sensor for temperature compensation of charging (-30mV/C/12V)RJ-45 connection point for a remote meter (not included)Various protection features (over charge, short circuit, reverse polarity etc)Self-consumption: 4mA at night, 10mA when chargingWorking temperature: -35C to +55CTerminals for wire up to 4.0mm2Size: 15.5 x 7.6 x 4.0 cmWeight: 185 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.
Wiring guide for Solar Panel Kits in SeriesThe panels are covered by a 1 year repair or replacement warranty provided by Photonic Universe. We will repair or replace defective items at our discretion. The solar controller is covered by a 1 year manufacturer warranty. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£189.99
60W 12V Reinforced Semi-Flexible Solar Charging Kit
This high-efficiency semi-flexible 60W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:60W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)10A automatic solar charge controller with advanced connectivity optionsA pair of 5m 2.5mm² single core solar extension cables with MC4 connectors5m of 2.5mm² dual core battery cable with 10A fuse, fuse holder and 8mm ring terminals 60W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 60W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 2.35kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 0.9m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (2.5mm² cross section) and 5m of 2.5mm² dual core battery cable fitted with a fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 60WMaximum power voltage: 20.2VMaximum power current: 2.97AOpen circuit voltage: 23.9VShort circuit current: 3.15APower allowance range: +/- 5%Solar Panel Dimensions: 720 x 505 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 2.35 kg2 x 0.9m of high quality single core solar cable (2.5mm² cross section)Male and female MC4 connectors Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35°C to +50°CTerminals for wire up to 4mm²Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year workmanship warranty
...Read more
View Product
£168.99
50W 12V Solar Charging Kit (German Solar Cells) With 10A Controller, Mounting Brackets And Cables
This high efficiency 50W 12V charging kit is perfect for permanent outdoor use to provide free electricity for charging a 12V battery to power various devices for many applications such as in a camper van, boat, shed or farm.This is a complete 50W solar charging kit which includes:High efficiency 50W monocrystalline solar panel with 5m of special solar cable and waterproof connectors10A automatic solar charge controller with advanced connectivity optionsSet of 4 corner plastic brackets for bonding to the roofWaterproof double entry cable gland5m of 2.5mm² dual core battery cable fitted with a 10A fuse, fuse holder and 8mm ring terminalsPair of waterproof MC4 connectors for easy connectivityUser manual with detailed installation instructions 50W solar panel:At Photonic Universe we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V solar panel charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14 x 7cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load; such as in a campervan or boat.This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:This kit includes a set of 4 plastic corner mounting brackets for fixing the solar panel to the roof. The brackets can be bonded to the roof using an appropriate sealant (not included). The waterproof double cable entry gland included with the kit is perfect for getting cables from outside to inside and keeping the place fully waterproof. The kit also includes 5m dual core battery cable with a 10A fuse, fuse holder and 8mm ring terminals and a pair of MC4 connectors.Solar panel specifications:Peak power: 50WMaximum power voltage: 20.2VMaximum power current: 2.48AOpen circuit voltage: 23.9VShort circuit current: 2.63APower allowance range: +/- 3%Dimensions: 590 x 505 x 25mmWeight: 4.2 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross section and 10A fuseMale and female MC4 connectors attached Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wires up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Corner brackets specifications: Material: plastic Colour: white Size (1 bracket): 15x15x6.5cm Weight: (4 brackets): 1.6kg Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty (including a 1 year warranty for the solar charge controller, and 1 year workmanship warranty for the solar panel). For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells
...Read more
View Product
£118.99
50W 12V Solar Charging Kit With 10A Controller And 5M extension cable (German Solar Cells)
We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.50W solar panel:This high efficiency, waterproof 50W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 50WMaximum power voltage: 20.2VMaximum power current: 2.48AOpen circuit voltage: 23.9VShort circuit current: 2.63APower allowance range: +/- 3%Dimensions: 590*505*25mmWeight: 4.2 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors attached Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty
...Read more
View Product
Out of Stock
£478.99
130w Narrow Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/10
130w Narrow Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/10 - (These kits are perfect for pop top roofs VW T6/T5/T4)
Highly efficient Black German Cells
This 130w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/10 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
130w Narrow Semi-Flexible Durable Black Solar Panel 1460 x 505 x 3 mm
Victron Energy SmartSolar MPPT 75/10
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
3 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
This high-efficiency, waterproof 130W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners and even zipping.
Product features:
Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions
Unique narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 55cm wide)
Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel
Incredibly light (only 3.7kg) and very thin (just 2mm) which is great for motorhome and caravan roofs
High resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications
100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified.
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter).
The fibreglass plastic used in this solar panel is very strong and durable. Soft and sealed edges of the solar panel make it resilient to mechanical impact on the sides and help avoid long term delamination.
Solar panel specifications:
Peak power: 130W
Maximum power voltage: 20.5V
Maximum power current: 6.35A
Open circuit voltage: 24.0V
Short circuit current: 6.66A
Dimensions: 1460 x 505 x 3 mm
Weight: 2.38 kg
MPPT Specifications
The Victron 75V 10A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 10A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
£539.99
160w Black Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT
160w Black Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop-top roofs)
Cable exits at the rear of the panel for a super-neat installation.
Highly efficient Cells with a Durable ETFE Coating
This 160w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
160w Semi-Flexible Durable Solar Panel Dimensions: 1350 x 665 x 3 mm
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
PV cable
Double entry Roof Gland
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
3 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar panel specifications:
Peak power: 160W
Maximum power voltage: 20.5V
Maximum power current: 7.81A
Open circuit voltage: 24.0V
Short circuit current: 8.20A
Dimensions: 1350 x 665 x 3 mm
Weight: 2.89 kg
This highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This model also features a rear-fitted circular junction box and 3m dual core cable. This high efficiency 160W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.
Product features:
Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel
Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions
Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws)
The panel is incredibly light (only 2.89kg) and very thin (just 2mm) which is great for all vehicles
High resistance to salt water environments makes it perfect for boats and marine applications
Sealed waterproof design ensures it can be used in all weather conditions
Junction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting
Fitted with a single length of high quality 3m dual core cable for easy installation and wiring
Strong ETFE coating:
In addition to the fibreglass reinforcement, the surface of this 160W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall.
This panel also features new generation 5-busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited.
Simple, professional installation:
This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface.
This solar panel has a unique black backing, making it ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.
Anti-reflective textured surface:
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter).
MPPT Specifications
The Victron 75/15 MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£989.99
210w Flexible Durable ETFE Solar Panel Kit with Victron SmartSolar MPPT 100/20
210w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/20 - (These kits are perfect for pop top roofs VW T6/T5/T4).
Highly efficient German Cells
This 210w Flexible Durable ETFE Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and efficient charging of your battery. The ETFE material of the solar panel makes it extremely durable and resistant to extreme weather conditions. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
210w Flexible Durable Solar Panel with ETFE Coating
Dimensions: 1274 x 1020 x 2 mm
Victron Energy SmartSolar MPPT 100/20
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
Cable Entry Roof Gland
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
3 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel
Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions
The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws)
The panel is incredibly light (only 5kg) and very thin (just 2mm) which is great for all vehicles
High resistance to salt water environments makes it perfect for boats and marine applications
The sealed waterproof design ensures it can be used in all weather conditions
Strong ETFE coating:
In addition to the fibreglass reinforcement, the surface of this 240W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall.
Anti-reflective textured surface:
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter).
Ease of connectivity:
The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system
Solar panel specifications:
Peak power: 210W
Maximum power voltage: 24V
Maximum power current: 9A
Open circuit voltage: 28.9V
Short circuit current: 9.4A
Dimensions: 1274 x 1020 x 2 mm
Weight: 4.23 kg
MPPT Specifications
The Victron 100V 20A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent battery life function.Ultrafast MPPT Technology:This 20A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high-speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 100/20 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£769.99
400W Monocrystalline Solar kit with Victron SmartSolar 150/35 MPPT, Mounts, Cables & MC4
400W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats (2 x 200w Panels)
This 400w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 150/35 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
Panel sizes are 1320x990x35mm
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m extension leads
Full Kit with 2 * 200W Monocrystalline panels, 2 * mount sets, Cable entry Gland, Victron SmartSolar Bluetooth enabled 150/35 MPPT charge controller, 5m of Black PV Cable (x2) & MC4 Connectors.1 x Ressetable Circuit Breaker1 x MPPT to Battery cable set with in-line fuse
Mounts available:
6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets
This highly efficient Victron solar 400w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications.
Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances
The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions.
This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
Wiring guide for Solar Panel Kits in Series
...Read more
View Product
£899.99
300w Flexible Durable ETFE Solar Panel Kit with Victron SmartSolar MPPT 100/20
300w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/30 - (These kits are perfect for pop top roofs VW T6/T5/T4).
Highly efficient German Cells
This 300w Flexible Durable ETFE Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and efficient charging of your battery. The ETFE material of the solar panel makes it extremely durable and resistant to extreme weather conditions. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
300w Flexible Durable Solar Panel with ETFE Coating
Dimensions: 1756 x 1020 x 2 mm
Victron Energy SmartSolar MPPT 100/30
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
Cable Entry Roof Gland
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
3 year warranty on the Solar Panel
5 year warranty on Victron MPPT
This high-efficiency, waterproof 300W monocrystalline solar panel is one of the largest semi-flexible solar panels available on the UK market. It is perfect for permanent outdoor use to provide free electricity for charging 12V or 24V battery / battery bank to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners and even zipping.
Product features:
Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions
Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel
Incredibly light (only 6kg) and very thin (just 2mm) which is great for motorhome and caravan roofs
High resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications
100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified.
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter).
The fibreglass plastic used in this solar panel is very strong and durable. Soft and sealed edges of the solar panel make it resilient to mechanical impact on the sides and help avoid long term delamination.
Solar panel specifications:
Peak power: 300W
Maximum power voltage: 33.8V
Maximum power current: 9A
Open circuit voltage: 41.1V
Short circuit current: 9.5A
Dimensions: 1756 x 1020 x 2 mm
Weight: 6kg
MPPT Specifications
The Victron 100V 30A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent battery life function.Ultrafast MPPT Technology:This 30A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high-speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 100/20 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
£625.99
160w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15
160w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop-top roofs)
Highly efficient German Cells with a Durable ETFE Coating
This 160w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
160w Semi-Flexible Durable Solar Panel Dimensions: 1434 x 699 x 2 mm
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
Double entry Roof Gland
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
3-year warranty on the Solar Panel
5-year warranty on Victron MPPT
Solar panel specifications:
Peak power: 160W
Maximum power voltage: 18.2V
Maximum power current: 9A
Open circuit voltage: 22V
Short circuit current: 9.4A
Dimensions: 1434 x 699 x 2 mm
Weight: 3.3 kg
Product features:
Robust construction using plastic reinforced with glass fiber creates a sturdy and durable solar panel
Special textured surface significantly reduces light reflection and improves performance in low-light and cloudy conditions
The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws)
The panel is incredibly light (only 2.85kg) and very thin (just 2mm) which is great for all vehicles
High resistance to saltwater environments makes it perfect for boats and marine applications
The sealed waterproof design ensures it can be used in all weather conditions
Strong ETFE coating:
In addition to the fiberglass reinforcement, the surface of this 150W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall.
High-quality 9-busbar solar cells:
This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and can extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited.
Anti-reflective textured surface:
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter).
MPPT Specifications
The Victron 75V 15amp MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent BatteryLife function.Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
Out of Stock
£395.45
100w Flexible Durable ETFE Solar Panel Kit with Victron SmartSolar MPPT 75/15
100w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4)
Highly efficient German Cells
This 100w Flexible Durable ETFE Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The ETFE material of the solar panel makes it extremely durable and resistant to extreme weather conditions. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
100w Flexible Durable Solar Panel with ETFE Coating
Dimensions: 990 x 540 x 2 mm
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
3 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel
Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions
The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws)
The panel is incredibly light (only 1.90kg) and very thin (just 2mm) which is great for all vehicles
High resistance to salt water environments makes it perfect for boats and marine applications
The sealed waterproof design ensures it can be used in all weather conditions
Strong ETFE coating:
In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall.
High-quality 9-busbar solar cells:
This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited.
Anti-reflective textured surface:
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter).
Ease of connectivity:
The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system
Solar panel specifications:
Peak power: 100W
Maximum power voltage: 18.2V
Maximum power current: 5.50A
Open circuit voltage: 21.1V
Short circuit current: 5.82A
Dimensions: 990 x 540 x 2 mm
Weight: 1.90 kg
MPPT Specifications
The Victron 75V 15A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
Out of Stock
£479.99
150w Flexible Durable ETFE Solar Panel Kit with Victron SmartSolar MPPT 75/15
150w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4)
Highly efficient German Cells
This 150w Flexible Durable ETFE Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
150w Flexible Durable Solar Panel with ETFE Coating
Dimensions: 1110 x 710 x 2 mm
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Black)
3 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel
Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions
The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws)
The panel is incredibly light (only 2.85kg) and very thin (just 2mm) which is great for all vehicles
High resistance to salt water environments makes it perfect for boats and marine applications
The sealed waterproof design ensures it can be used in all weather conditions
Strong ETFE coating:
In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall.
High-quality 9-busbar solar cells:
This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited.
Anti-reflective textured surface:
The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter).
Ease of connectivity:
The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system
Solar panel specifications:
Peak power: 150W
Maximum power voltage: 19.8V
Maximum power current: 7.58A
Open circuit voltage: 23.4V
Short circuit current: 8.03A
Dimensions: 1110 x 710 x 2 mm
Weight: 2.85 kg
This product comes with a 3 year workmanship warranty which covers material and production defects
MPPT Specifications
The Victron 75V 15A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
£295.99
50w Flexible Reinforced Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/10
50w Flexible Reinforced Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/10
(These kits are perfect for pop top roofs)
This 50w Flexible Durable ETFE Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency. The ETFE covering makes the solar panel extremely durable and resistant. The panel is also flexible, making it easy to install on curved surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
Our flexible solar panel complete kit is suitable for many vehicle types, boats and off-grid applications.
Kit Contents
50w Semi-Flexible Reinforced Solar Panel 880 x 350 x 4 mm
Victron Energy SmartSolar MPPT 75/10 SCC075010060R
Sikaflex 522 Caravan / Motorhome Adhesive
Pair of MC4 Connectors
10 Metres of 6mm PV Cable ( 2 * 5m Red & Black)
Double Entry Cable Roof Gland in White
1 x Resettable Circuit Breaker
1 x MPPT to Battery Cable set with In-Line Fuse
2 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Solar Panel Specifications:
aluminum reinforcement and strong ETFE coating:
This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.
In addition to the aluminium reinforcement, the surface of this 50W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.
High quality 5-busbar solar cells:
This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.
Other benefits:
Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)
Unique narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 35cm wide)
The panel is incredibly light (only 2kg) which is great for all vehicles
High resistance to salt water environments and the possibility to walk on the panel make it perfect for boats and yachts.
Sealed waterproof design ensures the panel can be used in all weather conditions.
Victron MPPT Solar Charge Controller Specifications:
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.
Programmable battery charge algorithm
See the software section on our website for details
Day/night timing and light dimming option
See the software section on Victron for details
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
Out of Stock
£1,168.99
500W (2 X 250W) 12V/24V Semi-Flexible Narrowboat Solar Charging Kit With Austrian Textured Fibreglass Solar Panels
This powerful, waterproof 500W monocrystalline solar charging kit is perfect for permanent outdoor use for charging 12V or 24V batteries in marine applications such as narrowboats, wide beams, Dutch barges, catamarans or other sailing boats. This kit is also suitable for various other applications, including motorhomes, caravans, vehicles, and off-grid back up solar systems.These 250W solar panels are amongst the largest semi-flexible solar panels available on the UK market and are ideal for flat or curved roofs, as they can easily mould to the shape of the mounting surface. This is our most powerful flexible solar charging kit, and can generate up to 40A charging current when charging a 12V battery. This kit will charge a typical 200Ah battery from 0% to 100% in only 5-6 hours of bright sunlight.The solar kit includes:2 x 250W semi-flexible, textured solar panels made of plastic reinforced with glass fibre - IEC certified (Austrian made)40A 12V/24V high efficiency MPPT solar charge controller with inbuilt LCD displayA pair of 5m 4mm2 single core extension cables with MC4 connectors3m of 10mm2 battery cable with a 40A fuse, fuse holder, and 8mm ring terminals 2 x 250W semi-flexible solar panels:These solar panels have an extremely durable fibreglass textured surface that minimises light reflection whilst maximising light absorption from every possible angle. This ensures high solar panel performance in low light or cloudy conditions, or when light falls at an angle (morning, evening or wintertime). When the panels are attached to a rigid surface, it is possible to walk on them in soft shoes (to prevent accidental scratches), making this kit the perfect choice for mounting on a boat deck.These Austrian-made solar panels are manufactured to the highest European quality standards and are fully waterproof with a high resistance to salt water environments.High efficiency MPPT controller:The 40A high efficiency MPPT solar charge controller included in this kit uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers.The controller features a comprehensive set of electronic protection functions such as stopping reverse current at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, over voltage, over load, short circuit and reverse polarity protection. The built-in LCD screen shows real-time charging parameters such as voltage, current (separately for solar panels / load), battery state of charge, accumulated charge and discharge energy. The easy to use buttons allow the user to manually select the battery type (sealed, flooded or gel) and program load settings (e.g. set timers for lighting, fans, pumps etc). Other features include LED indicators and a temperature sensor.This controller is compatible with sealed, gel or flooded batteries and can automatically recognise 12V/24V battery systems.Additional items: Each solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 connectors, which can be easily connected to the 4.0mm2 extension cable in this kit, or alternatively used for linking several panels together. This kit also includes 3m of heavy duty red and black battery cable (10mm2 cross section) with a 40A fuse, fuse holder, and 8mm ring terminals for use between the solar charge controller and your battery.Specifications (per solar panel):Peak power: 250WMaximum power voltage: 28.7VMaximum power current: 8.7AOpen circuit voltage: 34.9VShort circuit current: 9.2ADimensions: 1549 x 991 x 2 mmWeight: 5.27 kg2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 connectors Controller specifications:The most advanced MPPT technology to ensure high efficiency (>95%) of your solar systemFully automated operation and auto 12/24V selection for lead acid batteries3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2Maximum solar panel voltage 100VMaximum solar panel power 520W (12V) / 1040W (24V)Temperature sensor for automatic compensation (-3mV/°C/2V) (auto temperature compensation not enabled for lithium batteries)Comprehensive electronic protection featuresCommunication port: RS485/RJ45 interfaceGrounding: negative common groundCurrent limiting function (40A)Self-consumption: <12mAWorking temperature: -25°C to +50°CSize: 25.2 x 18 x 6.3 cmMounting dimensions: 21 x 17.1 cmWeight: 1.65kgMultiple mounting holes (5mm diameter) for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 2 year warranty. In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
£488.99
160W (80W+80W) 12V Reinforced Narrow Semi-Flexible Dual Battery Solar Charging Kit
This high efficiency semi-flexible 160W (80W + 80W) dual battery solar charging kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:2 x 80W reinforced narrow semi-flexible solar panels with a durable ETFE coating (German solar cells)20A 12V dual battery solar charge controller for independent charging of 2 batteries or battery banks (can work with a single battery too)A pair of 5m 4.0mm thick single core extension cables with MC4 connectors2 x 5m 4.0mm dual core battery cables with a fuse holder, 10A fuse and 8mm ring terminalsA pair of T-branch MC4 connectors, for connecting the panels in parallel 2 x 80W Reinforced narrow semi-flexible solar panels:These reinforced semi-flexible solar panels have a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within each solar panel. This additional reinforcement offers greater strength and resilience, making them amongst the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of these 80W semi-flexible solar panels is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of these panels creates an anti-reflective surface which allows the panels to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in these solar panels have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of these panels makes them ideal for curved roofs and surfaces where bonding is preferable (though the panels can also be fixed by bolts or screws). The panels are also incredibly light (only 3.05kg each) which makes them an ideal option for all vehicle applications. The unique narrow design also make them ideal for applications where space is restricted, or where there are obstructions on the roof. The panels are also highly resistant to salt water environments and it is also possible to walk on the panels, making them the perfect choice for boats and yachts.The panels are fitted with 2 x 1m of cable with MC4 connectors on the end.20A Dual battery controller:The kit includes a 20A 12V/24V dual battery solar charge controller designed to charge and protect two batteries independently, with automatic cut off to prevent over-charging. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your batteries. PWM technology can also recover some lost battery capacityThis is a perfect solar controller for a caravan / camper van / boat or another system with two batteries (e.g. engine and leisure battery) or battery banks. You can set the initial charging priority e.g. 80% power to go to the engine battery and 20% to leisure battery. When one of the batteries is fully charged the controller will automatically divert all power to the other battery.Can the unit work with only one battery? Yes, absolutely! The controller will determine automatically if there's only one battery connected and will pass 100% of charging current to this battery. You can add a second battery later.The unit has numerous safety functions, including protection against reverse current at night (from the battery back to the solar panel), over charge, short circuit, reverse polarity etc. Other features include various LED indicators, battery type selection (sealed, gel, flooded) and an RJ-45 socket for an optional remote LCD meter with 10m cable.A built-in temperature sensor allows the controller to optimise the charging process depending on the ambient temperature. If you are planning to position the controller far away from the battery, or if the battery and the controller are exposed to different ambient temperatures, an external remote temperature sensor with 3m cable is recommended for this dual battery solar charge controller. To enable connection to the screw terminals of the controller, the green connector block on the end of the remote temperature sensor cable should be cut off.The solar charge controller is compatible with sealed, gel and flooded lead acid batteries.Additional items:The kit includes 5m positive and negative 4.0mm solar extension leads for connecting the solar panels to the solar charge controller, and a 5m 4.0mm dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panels and the battery 1m + 5m + 5m = 11m.A pair of T-branch MC4 connectors is also provided, in order to connect these panels in parallel (Click on the Installation tab for further details). Specifications (per solar panel):Peak power: 80WMaximum power voltage: 20.2VMaximum power current: 3.96AOpen circuit voltage: 23.9VShort circuit current: 4.20APower allowance range: +/- 5%Solar Panel Dimensions: 1365 x 350 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 3.05 kg2 x 1m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Rated charging current 20AFully automated operation and auto 12/24V selection3 pairs of terminals (input, battery 1, battery 2)LEDs to indicate state of chargeTemperature sensor for temperature compensation of charging (-30mV/C/12V)RJ-45 connection point for a remote meter (not included)Various protection features (over charge, short circuit, reverse polarity etc)Self-consumption: 4mA at night, 10mA when chargingWorking temperature: -35C to +55CTerminals for wire up to 4.0mm2Size: 15.5 x 7.6 x 4.0 cmWeight: 230 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.The panels are covered by a 1 year repair or replacement warranty provided by Photonic Universe. We will repair or replace defective items at our discretion. The solar controller is covered by a 1 year manufacturer warranty. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.
Wiring guide for Solar Panel Kits in Series
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
Out of Stock
£301.99
120W 12V Reinforced Semi-Flexible Dual Battery Solar Charging Kit
This high-efficiency semi-flexible 120W dual battery solar charging kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:120W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)10A 12V dual battery solar charge controller for independent charging of 2 batteries or battery banks (can work with a single battery too)A pair of 5m 4.0mm² single core extension cables with MC4 connectors5m of 4.0mm² dual core battery cable 120W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 120W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 4.35kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 1m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Dual battery controller:The kit includes a 10A 12V/24V dual battery solar charge controller designed to charge and protect two batteries independently, with automatic cut off to prevent over-charging. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your batteries. PWM technology can also recover some lost battery capacityThis is a perfect solar controller for a caravan / camper van / boat or another system with two batteries (e.g. engine and leisure battery) or battery banks. You can set the initial charging priority e.g. 80% power to go to the engine battery and 20% to leisure battery. When one of the batteries is fully charged the controller will automatically divert all power to the other battery.Can the unit work with only one battery? Yes, absolutely! The controller will determine automatically if there's only one battery connected and will pass 100% of charging current to this battery. You can add a second battery later.The unit has numerous safety functions, including protection against reverse current at night (from the battery back to the solar panel), over charge, short circuit, reverse polarity etc. Other features include various LED indicators, battery type selection (sealed, gel, flooded) and an RJ-45 socket for an optional remote LCD meter with 10m cable.A built-in temperature sensor allows the controller to optimise the charging process depending on the ambient temperature. If you are planning to position the controller far away from the battery, or if the battery and the controller are exposed to different ambient temperatures, an external remote temperature sensor with 3m cable is recommended for this dual battery solar charge controller. To enable connection to the screw terminals of the controller, the green connector block on the end of the remote temperature sensor cable should be cut off.The solar charge controller is compatible with sealed, gel and flooded lead acid batteries.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4.0mm² cross section) and 5m of 4.0mm² dual core battery cable for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m. Solar panel specifications:Peak power: 120WMaximum power voltage: 20.2VMaximum power current: 5.94AOpen circuit voltage: 23.9VShort circuit current: 6.30APower allowance range: +/- 5%Solar Panel Dimensions: 1025 x 665 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 4.35 kg2 x 1m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Fully automated operation and auto 12/24V selection3 pairs of terminals (input, battery 1, battery 2)LEDs to indicate state of chargeTemperature sensor for temperature compensation of charging (-30mV/C/12V)Additional connection point for a remote temperature sensor (not included)RJ-45 connection point for a remote meter (not included)Various protection features (over charge, short circuit, reverse polarity etc)Self-consumption: 4mA at night, 10mA when chargingWorking temperature: -35C to +55CTerminals for wire up to 4.0mm²Size: 15.5 x 7.6 x 4.0 cmWeight: 185 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
This product is covered by a 1 year workmanship warranty
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
£299.99
100W (50W+50W) 12V Reinforced Narrow Semi-Flexible Solar Charging Kit
This high efficiency semi-flexible 100W (50W + 50W) solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:2 x 50W reinforced narrow semi-flexible solar panels with a durable ETFE coating (German solar cells)Advanced 10A solar charge controller with LCD display and powerful 2.4A dual USB outputA pair of 5m 4mm single core solar extension cables with MC4 connectors5m of 4.0mm double core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminalsA pair of T-branch MC4 connectors, for connecting the panels in parallel 2 x 50W Reinforced narrow semi-flexible solar panels:These reinforced semi-flexible solar panels have a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within each solar panel. This additional reinforcement offers greater strength and resilience, making them amongst the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of these 50W semi-flexible solar panels is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of these panels creates an anti-reflective surface which allows the panels to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in these solar panels have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of these panels makes them ideal for curved roofs and surfaces where bonding is preferable (though the panels can also be fixed by bolts or screws). The panels are also incredibly light (only 2kg each) which makes them an ideal option for all vehicle applications. The unique narrow design also make them ideal for applications where space is restricted, or where there are obstructions on the roof. The panels are also highly resistant to salt water environments and it is also possible to walk on the panels, making them the perfect choice for boats and yachts.The panels are fitted with 2 x 90cm of cable with MC4 connectors on the end.10A Solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panels) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc.The LCD display shows information regarding real time solar panel and battery performance, including: voltage, current, battery state of charge, and battery temperature. An energy statistics counter also displays the accumulated daily and monthly charge values (useful for comparing solar panel performance between different periods).This solar charge controller also offers the rare and highly sought-after feature of a dual USB charging output. These 5V USB ports have a total combined output of 2.4A, offering fast and powerful charging of USB compatible devices such as mobile phones, tablets, mp3 players etc.An optional 12V load (e.g. 12V lighting / fans) may also be connected directly to the solar charge controller, with various settings for night time lighting applications. In addition, this controller also offers various charging programs for different battery types, which can be easily selected by the user. In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit includes 5m positive and negative 4.0mm solar extension leads for connecting the solar panels to the solar charge controller, and a 5m 4.0mm dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panels and the battery 1m + 5m + 5m = 11m.A pair of T-branch MC4 connectors is also provided, in order to connect these panels in parallel (Click on the Installation tab for further details).Specifications (per solar panel):Peak power: 50WMaximum power voltage: 20.2VMaximum power current: 2.48AOpen circuit voltage: 23.9VShort circuit current: 2.62APower allowance range: +/- 5%Solar Panel Dimensions: 880 x 350 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 2.00 kg2 x 90cm of high quality single core solar cable (2.5mm² cross section)Male and female MC4 connectors Charge controller specifications:Fully automated operation and auto 12/24V selectionRated charge/discharge current: 10AMaximum solar panel input power: 160W (12V) / 320W (24V)Maximum solar panel input voltage 50VTemperature sensor for automatic compensation: -3mV/C/2V (25C)Working temperature: -25°C to +55°CSelf-consumption: max. ≤9.2mA (12V); ≤11.7mA (24V)3 pairs of terminals (solar, battery, optional load)Terminals for wire up to 4mm²Multiple mounting holes for ease of installationSize: 14.2 x 8.5 x 4.1 cmWeight: 220 g Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.The panels are covered by a 1 year repair or replacement warranty provided by Photonic Universe. We will repair or replace defective items at our discretion. The solar controller is covered by a 1 year manufacturer warranty. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.
Wiring guide for Solar Panel Kits in Series
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
...Read more
View Product
Out of Stock
£268.99
100W 12V Reinforced Narrow Semi-Flexible Dual Battery Solar Charging Kit
This high efficiency semi-flexible 100W dual battery solar charging kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:100W reinforced narrow semi-flexible solar panel with a durable ETFE coating (German solar cells)10A 12V dual battery solar charge controller for independent charging of 2 batteries or battery banks (can work with a single battery too)A pair of 5m 4.0mm² single core extension cables with MC4 connectors5m of 4.0mm² dual core battery cable 100W Reinforced narrow semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 100W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 3.65kg) which makes it an ideal option for all vehicle applications. The unique narrow design of this panel also makes it ideal for applications where space is restricted, or where there are obstructions on the roof. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 0.9m of cable with MC4 connectors at the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Dual battery controller:The kit includes a 10A 12V/24V dual battery solar charge controller designed to charge and protect two batteries independently, with automatic cut off to prevent over-charging. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your batteries. PWM technology can also recover some lost battery capacityThis is a perfect solar controller for a caravan / camper van / boat or another system with two batteries (e.g. engine and leisure battery) or battery banks. You can set the initial charging priority e.g. 80% power to go to the engine battery and 20% to leisure battery. When one of the batteries is fully charged the controller will automatically divert all power to the other battery.Can the unit work with only one battery? Yes, absolutely! The controller will determine automatically if there's only one battery connected and will pass 100% of charging current to this battery. You can add a second battery later.The unit has numerous safety functions, including protection against reverse current at night (from the battery back to the solar panel), over charge, short circuit, reverse polarity etc. Other features include various LED indicators, battery type selection (sealed, gel, flooded) and an RJ-45 socket for an optional remote LCD meter with 10m cable.A built-in temperature sensor allows the controller to optimise the charging process depending on the ambient temperature. If you are planning to position the controller far away from the battery, or if the battery and the controller are exposed to different ambient temperatures, an external remote temperature sensor with 3m cable is recommended for this dual battery solar charge controller. To enable connection to the screw terminals of the controller, the green connector block on the end of the remote temperature sensor cable should be cut off.The solar charge controller is compatible with sealed, gel and flooded lead acid batteries.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4mm cross section) and 5m of 4mm dual core battery cable for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 100WMaximum power voltage: 20.2VMaximum power current: 4.95AOpen circuit voltage: 23.9VShort circuit current: 5.25APower allowance range: +/- 5%Solar Panel Dimensions: 1125 x 505 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 3.65 kg2 x 0.9m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Fully automated operation and auto 12/24V selectionMaximum solar input power: 160W (12V system) / 320W (24V system)Maximum solar input voltage: 30V (12V system) / 55V (24V system)3 pairs of terminals (input, battery 1, battery 2)LEDs to indicate state of chargeTemperature sensor for temperature compensation of charging (-30mV/C/12V)RJ-45 connection point for a remote meter (not included)Various protection features (over charge,short circuit, reverse polarity etc)Self-consumption: 4mA at night, 10mA when chargingWorking temperature: -35C to +55CTerminals for wire up to 4.0mm2Size: 15.5 x 7.6 x 4.0 cmWeight: 185 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The panel is covered by a 1 year repair or replacement warranty
...Read more
Out of Stock
£268.99
100W 12V Reinforced Narrow Semi-Flexible Solar Charging Kit
This high-efficiency semi-flexible 100W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:100W reinforced narrow semi-flexible solar panel with a durable ETFE coating (German solar cells)Advanced 10A solar charge controller with LCD display and powerful 2.4A dual USB outputA pair of 5m 4mm² single core solar extension cables with MC4 connectors5m of 4mm² dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminals 100W Reinforced narrow semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 100W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 3.65kg) which makes it an ideal option for all vehicle applications. The unique narrow design of this panel also makes it ideal for applications where space is restricted, or where there are obstructions on the roof. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 0.9m of cable with MC4 connectors at the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc.The LCD display shows information regarding real time solar panel and battery performance, including: voltage, current, battery state of charge, and battery temperature. An energy statistics counter also displays the accumulated daily and monthly charge values (useful for comparing solar panel performance between different periods).This solar charge controller also offers the rare and highly sought-after feature of a dual USB charging output. These 5V USB ports have a total combined output of 2.4A, offering fast and powerful charging of USB compatible devices such as mobile phones, tablets, mp3 players etc.An optional 12V load (e.g. 12V lighting / fans) may also be connected directly to the solar charge controller, with various settings for night time lighting applications. In addition, this controller also offers various charging programs for different battery types, which can be easily selected by the user. In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4mm² cross section) and 5m of 4mm² dual core battery cable fitted with a fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 100WMaximum power voltage: 20.2VMaximum power current: 4.95AOpen circuit voltage: 23.9VShort circuit current: 5.25APower allowance range: +/- 5%Solar Panel Dimensions: 1125 x 505 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 3.65 kg2 x 0.9m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Fully automated operation and auto 12/24V selectionRated charge/discharge current: 10AMaximum solar panel input power: 160W (12V) / 320W (24V)Maximum solar panel input voltage 50VTemperature sensor for automatic compensation: -3mV/C/2V (25C)Working temperature: -25°C to +55°CSelf-consumption: max. ≤9.2mA (12V); ≤11.7mA (24V)3 pairs of terminals (solar, battery, optional load)Terminals for wire up to 4mm²Multiple mounting holes for ease of installationSize: 14.2 x 8.5 x 4.1 cmWeight: 220 g Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year workmanship warranty
...Read more
Out of Stock
£278.99
100W 12V Reinforced Semi-Flexible Dual Battery Solar Charging Kit
This high efficiency semi-flexible 100W dual battery solar charging kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:100W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)10A 12V dual battery solar charge controller for independent charging of 2 batteries or battery banks (can work with a single battery too)A pair of 5m 4.0mm² single core extension cables with MC4 connectors5m of 4.0mm² dual core battery cable 100W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 100W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 3.65kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 1m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Dual battery controller:The kit includes a 10A 12V/24V dual battery solar charge controller designed to charge and protect two batteries independently, with automatic cut off to prevent over-charging. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your batteries. PWM technology can also recover some lost battery capacityThis is a perfect solar controller for a caravan / camper van / boat or another system with two batteries (e.g. engine and leisure battery) or battery banks. You can set the initial charging priority e.g. 80% power to go to the engine battery and 20% to leisure battery. When one of the batteries is fully charged the controller will automatically divert all power to the other battery.Can the unit work with only one battery? Yes, absolutely! The controller will determine automatically if there's only one battery connected and will pass 100% of charging current to this battery. You can add a second battery later.The unit has numerous safety functions, including protection against reverse current at night (from the battery back to the solar panel), over charge, short circuit, reverse polarity etc. Other features include various LED indicators, battery type selection (sealed, gel, flooded) and an RJ-45 socket for an optional remote LCD meter with 10m cable.A built-in temperature sensor allows the controller to optimise the charging process depending on the ambient temperature. If you are planning to position the controller far away from the battery, or if the battery and the controller are exposed to different ambient temperatures, an external remote temperature sensor with 3m cable is recommended for this dual battery solar charge controller. To enable connection to the screw terminals of the controller, the green connector block on the end of the remote temperature sensor cable should be cut off.The solar charge controller is compatible with sealed, gel and flooded lead acid batteries.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4.0mm² cross section) and 5m of 4.0mm² dual core battery cable for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m. Solar panel specifications:Peak power: 100WMaximum power voltage: 20.2VMaximum power current: 4.95AOpen circuit voltage: 23.9VShort circuit current: 5.25APower allowance range: +/- 5%Solar Panel Dimensions: 860 x 665 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 3.65 kg2 x 1m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Fully automated operation and auto 12/24V selection3 pairs of terminals (input, battery 1, battery 2)LEDs to indicate state of chargeTemperature sensor for temperature compensation of charging (-30mV/C/12V)Additional connection point for a remote temperature sensor (not included)RJ-45 connection point for a remote meter (not included)Various protection features (over charge, short circuit, reverse polarity etc)Self-consumption: 4mA at night, 10mA when chargingWorking temperature: -35C to +55CTerminals for wire up to 4.0mm²Size: 15.5 x 7.6 x 4.0 cmWeight: 185 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year workmanship warranty
...Read more
Out of Stock
£238.99
80W 12V Reinforced Semi-Flexible Dual Battery Solar Charging Kit
This high efficiency semi-flexible 80W dual battery solar charging kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:80W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)10A 12V dual battery solar charge controller for independent charging of 2 batteries or battery banks (can work with a single battery too)A pair of 5m 4.0mm² single core extension cables with MC4 connectors5m of 4.0mm² dual core battery cable 80W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 80W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 3.10kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 1m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Dual battery controller:The kit includes a 10A 12V/24V dual battery solar charge controller designed to charge and protect two batteries independently, with automatic cut off to prevent over-charging. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your batteries. PWM technology can also recover some lost battery capacityThis is a perfect solar controller for a caravan / camper van / boat or another system with two batteries (e.g. engine and leisure battery) or battery banks. You can set the initial charging priority e.g. 80% power to go to the engine battery and 20% to leisure battery. When one of the batteries is fully charged the controller will automatically divert all power to the other battery.Can the unit work with only one battery? Yes, absolutely! The controller will determine automatically if there's only one battery connected and will pass 100% of charging current to this battery. You can add a second battery later.The unit has numerous safety functions, including protection against reverse current at night (from the battery back to the solar panel), over charge, short circuit, reverse polarity etc. Other features include various LED indicators, battery type selection (sealed, gel, flooded) and an RJ-45 socket for an optional remote LCD meter with 10m cable.A built-in temperature sensor allows the controller to optimise the charging process depending on the ambient temperature. If you are planning to position the controller far away from the battery, or if the battery and the controller are exposed to different ambient temperatures, an external remote temperature sensor with 3m cable is recommended for this dual battery solar charge controller. To enable connection to the screw terminals of the controller, the green connector block on the end of the remote temperature sensor cable should be cut off.The solar charge controller is compatible with sealed, gel and flooded lead acid batteries.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4mm cross section) and 5m of 4mm dual core battery cable for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m. Solar panel specifications:Peak power: 80WMaximum power voltage: 20.2VMaximum power current: 3.96AOpen circuit voltage: 23.9VShort circuit current: 4.2APower allowance range: +/- 5%Solar Panel Dimensions: 730 x 665 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 3.10 kg2 x 0.9m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Fully automated operation and auto 12/24V selectionMaximum solar input power: 160W (12V system) / 320W (24V system)Maximum solar input voltage: 30V (12V system) / 55V (24V system)3 pairs of terminals (input, battery 1, battery 2)LEDs to indicate state of chargeTemperature sensor for temperature compensation of charging (-30mV/C/12V)RJ-45 connection point for a remote meter (not included)Various protection features (over charge,short circuit, reverse polarity etc)Self-consumption: 4mA at night, 10mA when chargingWorking temperature: -35C to +55CTerminals for wire up to 4.0mm2Size: 15.5 x 7.6 x 4.0 cmWeight: 185 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.The panels are covered by a 1 year repair or replacement warranty
...Read more
Out of Stock
£228.99
80W 12V Reinforced Semi-Flexible Solar Charging Kit
This high efficiency semi-flexible 80W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:80W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)10A automatic solar charge controller with advanced connectivity optionsA pair of 5m 4mm single core solar extension cables with MC4 connectors5m of 4mm dual core battery cable 80W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 80W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredible light (only 3.10kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 1m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4mm cross section) and 5m of 4mm dual core battery cable for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 80WMaximum power voltage: 20.2VMaximum power current: 3.96AOpen circuit voltage: 23.9VShort circuit current: 4.2APower allowance range: +/- 5%Solar Panel Dimensions: 730 x 665 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 3.10 kg2 x 0.9m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The panel and solar charge controller are covered by a 1 year workmanship warranty
...Read more
£191.99
60W 12V Reinforced Semi-Flexible Dual Battery Solar Charging Kit
This high-efficiency, waterproof semi-flexible 60W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems, and complete household solar power systems.Solar kit includes:60W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)10A 12V dual battery solar charge controller for independent charging of 2 batteries or battery banks (can work with a single battery too)A pair of 5m 2.5mm² single core extension cables with MC4 connectors5m of 2.5mm² dual-core battery cable 60W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 60W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 2.35kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 0.9m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Dual Battery Controller:The kit includes a 10A 12V/24V dual battery solar charge controller designed to charge and protect two batteries independently, with automatic cut off to prevent over-charging. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your batteries. PWM technology can also recover some lost battery capacityThis is a perfect solar controller for a caravan / camper van / boat or another system with two batteries (e.g. engine and leisure battery) or battery banks. You can set the initial charging priority e.g. 80% power to go to the engine battery and 20% to leisure battery. When one of the batteries is fully charged the controller will automatically divert all power to the other battery.Can the unit work with only one battery? Yes, absolutely! The controller will determine automatically if there's only one battery connected and will pass 100% of charging current to this battery. You can add a second battery later.The unit has many protection functions, such as stopping reverse current at night (from the battery back to the solar panel), over charge, short circuit, reverse polarity etc. Other features include various LED indicators, battery type selection (sealed, gel, flooded) and an RJ-45 socket for an optional remote LCD meter with 10m cable.A built-in temperature sensor allows the controller to optimise the charging process depending on the ambient temperature. If you are planning to position the controller far away from the battery, or if the battery and the controller are exposed to different ambient temperatures, an external remote temperature sensor with 3m cable is recommended for this dual battery solar charge controller. To enable connection to the screw terminals of the controller, the green connector block on the end of the remote temperature sensor cable should be cut off.The solar charge controller is compatible with sealed, gel and flooded lead acid batteries.Additional items:The kit also includes a pair of positive and negative 5m solar extension leads (2.5mm cross section) and 5m of 2.5mm dual core battery cable for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 0.9m + 5m + 5m = 11m.Solar panel specifications:Peak power: 60WMaximum power voltage: 20.2VMaximum power current: 2.97AOpen circuit voltage: 23.9VShort circuit current: 3.15APower allowance range: +/- 5%Solar Panel Dimensions: 720 x 505 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 2.35 kg2 x 0.9m of high quality single core solar cable (2.5mm² cross section)Male and female MC4 connectors Charge controller specifications:Fully automated operation and auto 12/24V selection3 pairs of terminals (input, battery 1, battery 2)LEDs to indicate state of chargeTemperature sensor for temperature compensation of charging (-30mV/C/12V)Additional connection point for a remote temperature sensor (not included)RJ-45 connection point for a remote meter (not included)Various protection features (over charge, short circuit, reverse polarity etc)Self-consumption: 4mA at night, 10mA when chargingWorking temperature: -35°C to +55°CTerminals for wire up to 4.0mm²Size: 15.5 x 7.6 x 4.0 cmWeight: 185 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The product is covered by a 1 year workmanship warranty.
...Read more
View Product
Out of Stock
£129.49
30W 12V Reinforced Semi-Flexible Solar Charging Kit
This high-efficiency semi-flexible 30W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:30W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)5A automatic solar charge controller with USB port for charging compatible USB devicesA pair of 5m 2.5mm² single core solar extension cables with MC4 connectors5m of 2.5mm² dual core battery cable with 10A fuse, fuse holder and 8mm ring terminals 30W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 20W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 1.35kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 0.9m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.5A Solar charge controller:The kit includes a 5A 12V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit etc. Other features of this controller include:A 5V USB port (1.2A output) to enable fast charging of USB compatible devices (e.g mobile phones, tablets, mp3 players etc)A pair of load terminals for connecting 12V loads (such as lights) if desired.Bright LED indicators to show the battery state of charge as well as the status of the solar panel and 12V load. An "on/off" button is also available for the load. This controller can work with sealed, gel and flooded batteries (the battery type can be selected by the user). The controller can accept up to 60W of solar power input which means there is the potential to add more solar panels to the kit in the future.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (2.5mm² cross section) and 5m of 2.5mm² dual core battery cable fitted with a fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 30WMaximum power voltage: 20.2VMaximum power current: 1.49AOpen circuit voltage: 23.9VShort circuit current: 1.57APower allowance range: +/- 5%Solar Panel Dimensions: 505 x 400 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 1.35 kg2 x 0.9m of high quality single core solar cable (2.5mm² cross section)Male and female MC4 connectors Charge controller specifications:Charging current: 5ALoad current: 5ARated voltage: 12VLEDs to indicate battery state of charge, solar panel and load statusSelf-consumption: ≤5mAWorking temperature: -35C to +55CUSB Interface: 5V DC / 1.2A3 pairs of terminals (solar panel, battery, load) for wire up to 2.5mm2Size: 109.7 x 65.5 x 20.8 mmWeight: 90 g2 x 4.5mm mounting holes Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The panel and solar charge controller are covered by a 1 year warranty provided by Photonic Universe. We will repair or replace defective items at our discretion. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.
...Read more
£119.49
20W 12V Reinforced Semi-Flexible Solar Charging Kit
This high-efficiency semi-flexible 20W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:20W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)5A automatic solar charge controller with USB port for charging compatible USB devicesA pair of 5m 2.5mm² single core solar extension cables with MC4 connectors5m of 2.5mm² dual core battery cable with 10A fuse, fuse holder and 8mm ring terminals 20W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 20W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 1.1kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 0.9m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.5A Solar charge controller:The kit includes a 5A 12V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit etc. Other features of this controller include:A 5V USB port (1.2A output) to enable fast charging of USB compatible devices (e.g mobile phones, tablets, mp3 players etc)A pair of load terminals for connecting 12V loads (such as lights) if desired.Bright LED indicators to show the battery state of charge as well as the status of the solar panel and 12V load. An "on/off" button is also available for the load. This controller can work with sealed, gel and flooded batteries (the battery type can be selected by the user). The controller can accept up to 60W of solar power input which means there is the potential to add more solar panels to the kit in the future.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (2.5mm² cross section) and 5m of 2.5mm² dual core battery cable fitted with a fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m. Solar panel specifications:Peak power: 20WMaximum power voltage: 17.5VMaximum power current: 1.14AOpen circuit voltage: 21.6VShort circuit current: 1.21APower allowance range: +/- 5%Solar Panel Dimensions: 450 x 350 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 1.10 kg2 x 0.9m of high quality single core solar cable (2.5mm² cross section)Male and female MC4 connectors Charge controller specifications:Charging current: 5ALoad current: 5ARated voltage: 12VLEDs to indicate battery state of charge, solar panel and load statusSelf-consumption: ≤5mAWorking temperature: -35C to +55CUSB Interface: 5V DC / 1.2A3 pairs of terminals (solar panel, battery, load) for wire up to 2.5mm2Size: 109.7 x 65.5 x 20.8 mmWeight: 90 g2 x 4.5mm mounting holes Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The panel and solar charge controller are covered by a 1 year warranty
...Read more
View Product
Out of Stock
£598.99
310W 12V/24V Complete Solar Charging Kit With 20A Mppt Controller (German Solar Panel)
This high efficiency 310W monocrystalline solar kit is perfect for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries. It can also be used for off-grid lighting applications and for back up power systems with batteries and inverters.This is one of the most powerful solar charging kits for vehicles, boats or off-grid power systems. It can generate up to 20A charging current when charging 12V battery, which means that a typical 100Ah battery will be charged from 0% to 100% in only 5 hours of bright sunlight.This 310W 12V/24V solar charging kit includes:High quality 310W monocrystalline solar panel, manufactured in Germany to the highest European quality and performance standards, with 2 x 1m of solar cable with MC4 connectors20A 12V/24V high efficiency MPPT solar charge controllerRemote LCD display with 5m cable (shows battery status and solar system performance)Set of 4 plastic corner mounting brackets for bonding to the roofSet of 4 plastic side mounting brackets for bonding to the roofWaterproof double entry cable gland2 x 5m of single core 4.0mm solar extension cable for the solar panel5m of 6.0mm twin core battery cable fitted with a 20A fuse, fuse holder and 8mm ring terminals 310W Monocrystalline solar panel:This solar panel features thick 4.0mm tempered solar glass, which makes it a lot stronger and more durable than other standard solar panels with 3.2mm glass. The robust waterproof design and strong aluminium frame of the solar panel are suitable for all weather conditions, including inland, marine applications and countries with hot or cold climates.The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to the 5m of 4mm solar extension cable supplied with this kit.20A MPPT solar charge controller:The high efficiency solar charge controller included in this kit uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers.The controller features a comprehensive set of electronic protection functions such as stopping reverse current at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, over voltage, over load, short circuit and reverse polarity protection.This controller also offers numerous possibilities for system personalisation. For instance, you can specify the duration and voltage of each charging stage, create a user-defined battery type with charging parameters specific to your battery, or personalise the load settings - e.g. set timers for lighting, fans, pumps. Other features include LED indicators and an audible fault alarm.The kit / controller comes with a remote LCD meter with 5m cable. This meter can display the state of charge of the battery and various charging parameters such as voltage and current. It can also record accumulated battery capacity and min / max values reached over time.Additional items:This kit also includes 5m positive and negative extension leads for connecting the solar panel to the solar charge controller, a 5m 6.0mm dual core battery cable with a 20A fuse, fuse holder and 8mm eyelets for use between the solar charge controller and your battery, a set of 4 corner and 4 side mounting brackets for fixing the solar panel to the roof using an appropriate sealant (not included) and a waterproof double cable entry gland for keeping the cable connection fully waterproof when mounting the panel outside and feeding the solar cables inside the vehicle / building / below deckSolar panel specifications:Peak power: 310WMaximum power voltage: 33.33VMaximum power current: 9.30AOpen circuit voltage: 41.0VShort circuit current: 9.94ADimensions: 165.5 x 99.5 x 4 cmWeight: 18 kgOperating temperature range: -40C to +85CMounting holes for installation2 x 1.0m of high quality single core solar cable 4.0mm cross sectionMale and female MC4 connectorsSpecial tempered solar glass 4.0mm thick Charge controller specifications:The most advanced MPPT technology to ensure high efficiency of your solar systemFully automated operation and auto 12/24V selection3 pairs of terminals (solar panel, battery, load) for wires up to 10mmMaximum solar panel voltage 150VTemperature sensor for automatic compensation (-3mV/C/2V)Comprehensive electronic protection featuresCommunication port: RS485/RJ45 interfaceGrounding: negative common groundCurrent limiting function (20A)Self-consumption: <60mA (12V), <30mA (24V)Working temperature: -35C to +55CEnclosure: IP30Size: 21.7 x 14.3 x 5.6 cmWeight: 1500 gRemote meter size (without frame): 10 x 10 x 3 cmRemote meter size (with frame): 12 x 12 x 5 cmRemote meter weight: 230 gMultiple mounting holes for ease of installation Mounting accessory specifications:Material: plasticColour: whiteCable diameter for the cable gland: 3-7mmSize: each corner bracket 15 x 15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cmCombined weight: 2.7kg Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The solar panel is covered by a 5 years workmanship warranty. The solar charge controller comes with a 2 year warranty.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.
...Read more
Out of Stock
£518.99
275W 12V/24V Complete Solar Charging Kit With 20A Mppt Controller (German Solar Panel)
This high efficiency, 275W polycrystalline solar kit is perfect for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries. It can also be used for off-grid lighting applications and for back up power systems with batteries and inverters.This is one of the most powerful solar charging kits for vehicles, boats or off-grid power systems. It can generate up to 20A charging current when charging 12V battery, which means that a typical 100Ah battery will be charged from 0% to 100% in only 5-6 hours of bright sunlight.This 275W 12V/24V solar charging kit includes:High quality 275W polycrystalline solar panel, manufactured in Germany to the highest European quality and performance standards, with 2 x 0.9m of solar cable with MC4 connectors20A 12V/24V high efficiency MPPT solar charge controllerRemote LCD display with 5m cable (shows battery status and solar system performance)Set of 4 corner plastic mounting brackets for bonding to the roofSet of 4 plastic side mounting brackets for bonding to the roofWaterproof double entry cable gland2 x 5m of single core 4.0mm solar extension cable for the solar panel5m of 6.0mm twin core battery cable with a 20A fuse, fuse holder and 8mm ring terminals 275W Polycrystalline solar panel: This solar panel features thick 4.0mm tempered solar glass, which makes it a lot stronger and more durable than other standard solar panels with standard 3.2mm glass. The robust waterproof design and strong aluminium frame ensure that the panel is suitable for all weather conditions, inland and marine applications and countries with hot or cold climates.The panel is fitted with 2 x 0.9m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to the 5m of 4mm solar extension cable supplied with this kit.20A MPPT solar charge controller:The high efficiency solar charge controller included in this kit uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers.The controller features a comprehensive set of electronic protection functions such as stopping reverse current at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, over voltage, over load, short circuit and reverse polarity protection.This controller also offers numerous possibilities for system personalisation. For instance, you can specify the duration and voltage of each charging stage, create a user-defined battery type with charging parameters specific to your battery, or personalise the load settings - e.g. set timers for lighting, fans, pumps. Other features include LED indicators and an audible fault alarm.The kit / controller comes with a remote LCD meter with 5m cable. This meter can display the state of charge of the battery and various charging parameters such as voltage and current. It can also record accumulated battery capacity and min / max values reached over time.Additional items:This kit also includes 5m positive and negative extension leads for connecting the solar panel to the solar charge controller, a 5m 6.0mm dual core battery cable with a 20A fuse, fuse holder and 8mm eyelets for use between the solar charge controller and your battery, a set of 4 corner and 4 side mounting brackets for fixing the solar panel to the roof using an appropriate sealant (not included) and a waterproof double cable entry gland for keeping the cable connection fully waterproof when mounting the panel outside and feeding the solar cables inside the vehicle / building / below deck.Solar panel specifications:Peak power: 275WMaximum power voltage: 31.36VMaximum power current: 8.77AOpen circuit voltage: 38.57VShort circuit current: 9.38ADimensions: 165.5 x 99.5 x 4 cmWeight: 17.9 kgOperating temperature range: -40C to +85CMounting holes for installationSpecial tempered solar glass 4.0mm thick2 x 0.9m of high quality single core solar cable 4.0mm cross sectionMale and female MC4 connectors Charge controller specifications:The most advanced MPPT technology to ensure high efficiency of your solar systemFully automated operation and auto 12/24V selection3 pairs of terminals (solar panel, battery, load) for wires up to 10mmMaximum solar panel voltage 150VTemperature sensor for automatic compensation (-3mV/C/2V)Comprehensive electronic protection featuresCommunication port: RS485/RJ45 interfaceGrounding: negative common groundCurrent limiting function (20A)Self-consumption: <60mA (12V), <30mA (24V)Working temperature: -35C to +55CEnclosure: IP30Size: 21.7 x 14.3 x 5.6 cmWeight: 1500 gRemote meter size (without frame): 10 x 10 x 3 cmRemote meter size (with frame): 12 x 12 x 5 cmRemote meter weight: 230 gMultiple mounting holes for ease of installation Mounting accessory specifications:Material: plasticColour: whiteCable diameter for the cable gland: 3-7mmSize: each corner bracket 15 x 15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cmCombined weight: 2.7g Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The solar panel is covered by a 5 year workmanship warranty.
...Read more
Out of Stock
£428.99
320W 12V Solar Charging Kit With 20A Controller And 5M Cable (German Solar Cells)
320W solar panel:This high efficiency, waterproof 320W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to to other solar panels, your existing system or 6mm extension cable (the MC4 connectors can also be cut off when wiring to the screw terminals of the solar charge controller).The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.20A Solar charge controller:This kit includes a powerful 20A 12V/24V solar charge controller, which is designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 20A controller is the small size - only 16 x 8cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below).The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.
Solar panel specifications:
Peak power: 320W
Maximum power voltage: 18.35V
Maximum power current: 17.88A
Open circuit voltage: 21.85V
Short circuit current: 19.04A
Power allowance range: +/- 3%
Dimensions: 179 x 99 x 4 cm
Weight: 19.5 kg
8 mounting holes 9 x 14 mm
2 x 5m of high quality single core solar cable (6.0mm cross section)
Male and female MC4 connectors
...Read more
Out of Stock
£328.99
250W 12V Solar Charging Kit With 20A Controller And 5M Cable (German Solar Cells)
we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.250W solar panel:This high efficiency, waterproof 250W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to to other solar panels, your existing system or 6mm extension cable (the MC4 connectors can also be cut off when wiring to the screw terminals of the solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.20A Solar charge controller:This kit includes a powerful 20A 12V/24V solar charge controller, which is designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 20A controller is the small size - only 16 x 8cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can handle up to 320W of solar power (12V system) or 640W of solar power (24V system), so the kit can be upgraded to increase the power output by adding more solar panels, without the need to buy a new controller.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 250WMaximum power voltage: 20.2VMaximum power current: 12.38AOpen circuit voltage: 23.9VShort circuit current: 13.12APower allowance range: +/- 3%Dimensions: 139 x 99 x 4 cmWeight: 15.3 kg8 mounting holes 9 x 14 mm2 x 5m of high quality single core solar cable (6.0mm cross section)Male and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 20AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 10mm2Size: 15.9 x 8.1 x 4.8 cmWeight: 300 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty
...Read more
Out of Stock
£308.99
200W (100W+100W) Solar Charging Kit With 20A Controller With Lcd Display And 2 X 5M Cables (German Solar Cells)
We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in these solar panels. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This kit includes:2 x 100W high efficiency waterproof monocrystalline solar panels, each with 5m cable and MC4 connectorsAdvanced 20A solar charge controller with LCD display and powerful 2.4A dual USB output 2 x 100W solar panels:This 200W system is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).Each panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panels can be used in all weather conditions.These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in smaller overall solar panels, which are ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Advanced 20A solar charge controller:The kit includes a 20A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc.The LCD display shows information regarding real time solar panel and battery performance, including: voltage, current, battery state of charge, and battery temperature. An energy statistics counter also displays the accumulated daily and monthly charge values (useful for comparing solar panel performance between different periods).This solar charge controller also offers the rare and highly sought-after feature of a dual USB charging output. These 5V USB ports have a total combined output of 2.4A, offering fast and powerful charging of USB compatible devices such as mobile phones, tablets, mp3 players etc.An optional programmable load (e.g. 12V lighting / fans / water pumps) may also be connected directly to the solar charge controller. Using the buttons and LCD display, the user can set personalised On/Off timers for these appliances. In addition, this controller also offers various charging programs for different battery types, which can be easily selected by the user. In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Specifications (per solar panel):Peak power: 100WMaximum power voltage: 20.2VMaximum power current: 4.95AOpen circuit voltage: 23.9VShort circuit current: 5.26APower allowance range: +/- 3%Dimensions: 845 x 670 x 30mmWeight: 7kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 4.0mm cross sectionMale and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Fully automated operation and auto 12/24V selectionRated charge/discharge current: 20AMaximum solar panel input power: 320W (12V) / 640W (24V)Maximum solar panel input voltage 50VTemperature sensor for automatic compensation: -3mV/C/2V (25C)Working temperature: -25ºC to +55ºCSelf-consumption: max. ≤9.2mA (12V); ≤11.7mA (24V)3 pairs of terminals (solar, battery, optional load)Terminals for wire up to 10mm2Multiple mounting holes for ease of installationSize: 16 x 9.5 x 5 cmWeight: 350 g Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty
...Read more
£288.99
200W Solar Charging Kit With 20A Controller And Cables, German Solar Cells
we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in these solar panels. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This kit includes:2 x 100W high efficiency waterproof monocrystalline solar panels, each with 5m cable and MC4 connectors20A Photonic Universe solar charge controller 2 x 100W solar panels:This 200W system is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).Each panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panels can be used in all weather conditions.These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in smaller overall solar panels, which are ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.20A Solar charge controller:This kit includes a powerful 20A 12V/24V solar charge controller, which is designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 20A controller is the small size - only 16 x 8cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can handle up to 320W of solar power (12V system) or 640W of solar power (24V system), so the kit can be upgraded to increase the power output by adding more solar panels, without the need to buy a new controller.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Specifications (per solar panel):Peak power: 100WMaximum power voltage: 20.2VMaximum power current: 4.95AOpen circuit voltage: 23.9VShort circuit current: 5.26APower allowance range: +/- 3%Dimensions: 845 x 670 x 30mmWeight: 7kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 4.0mm cross sectionMale and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 20AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 10mm2Size: 15.9 x 8.1 x 4.8 cmWeight: 300 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty
...Read more
View Product
Out of Stock
£279.99
180W 12V Solar Charging Kit With 20A Controller And 5M Cable (German Solar Cells)
we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.180W solar panel:This high efficiency, waterproof 180W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system or 6mm extension cable (the MC4 connectors can also be cut off when wiring to the screw terminals of the solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.20A Solar charge controller:This kit includes a powerful 20A 12V/24V solar charge controller, which is designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 20A controller is the small size - only 16 x 8cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can handle up to 320W of solar power (12V system) or 640W of solar power (24V system), so the kit can be upgraded to increase the power output by adding more solar panels, without the need to buy a new controller.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 180WMaximum power voltage: 20.2VMaximum power current: 8.91AOpen circuit voltage: 23.9VShort circuit current: 9.47APower allowance range: +/- 3%Dimensions: 147.5 x 67 x 3.5 cmWeight: 11.5 kg8 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable (4.0mm cross section)Male and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 20AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 10mm2Size: 15.9 x 8.1 x 4.8 cmWeight: 300 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty
...Read more
Out of Stock
£203.99
160W 12V Solar Charging Kit With 20A Controller And 5M Cable
This kit includes:160W monocrystalline solar panel with 5m of solar cable and MC4 connectorsAdvanced 20A Photonic Universe solar charge controller 160W solar panel:The waterproof, high efficiency Photonic Universe 160W monocrystalline solar panel included in this kit is perfect for permanent outdoor use to provide free electricity to charge a 12V battery to power hundreds of devices and electrical appliances.The long-lasting monocrystalline solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.The panel comes with 5m of special solar cable which can operate at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of the cable for easy connection to the 20A solar charge controller(MC4 connectors can also be cut off when wiring to screw terminals of a solar charge controller).Each individual solar panel is thoroughly tested to the highest quality standards, and labelled with a unique serial number for further quality control and increased warranty protection.20A solar charge controller:The kit includes a 20A Photonic Universe solar charge controller designed to protect batteries whilst charging them, having automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This solar controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 20A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below)The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. The controller is not waterproof and should be used indoors.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 160WMaximum power voltage: 18.8VMaximum power current: 8.48AOpen circuit voltage: 22.9VShort circuit current: 9.02APower allowance range: 0~+3%Dimensions: 1480 x 670 x 35 mmWeight: 12 kg4 mounting holes5m of special solar cable with MC4 connectors attached Charge controller specifications:Rated current 20AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 10mm2Size: 15.9 x 8.1 x 4.8 cmWeight: 300 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty provided by Photonic Universe (including a 1 year warranty for the solar charge controller and a 1 year workmanship warranty for the solar panel). We will repair or replace defective items at our discretion. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.
...Read more
£288.99
160W Solar Charging Kit With 20A Charge Controller With Lcd Display And Cables, German Solar Cells
we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in these solar panels. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This kit includes:2 x 80W high efficiency waterproof monocrystalline solar panels, each with 5m cable and MC4 connectorsAdvanced 20A solar charge controller with LCD display and powerful 2.4A dual USB output 2 x 80W solar panels:This 160W system is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).Each panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panels can be used in all weather conditions.These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Advanced 20A solar charge controller:The kit includes a 20A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc.The LCD display shows information regarding real time solar panel and battery performance, including: voltage, current, battery state of charge, and battery temperature. An energy statistics counter also displays the accumulated daily and monthly charge values (useful for comparing solar panel performance between different periods).This solar charge controller also offers the rare and highly sought-after feature of a dual USB charging output. These 5V USB ports have a total combined output of 2.4A, offering fast and powerful charging of USB compatible devices such as mobile phones, tablets, mp3 players etc.An optional programmable load (e.g. 12V lighting / fans / water pumps) may also be connected directly to the solar charge controller. Using the buttons and LCD display, the user can set personalised On/Off timers for these appliances. In addition, this controller also offers various charging programs for different battery types, which can be easily selected by the user. In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Specifications (per solar panel):Peak power: 80WMaximum power voltage: 20.2VMaximum power current: 3.96AOpen circuit voltage: 23.9VShort circuit current: 4.21APower allowance range: +/- 3%Dimensions: 700 x 670 x 30 mmWeight: 6 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors attached Charge controller specifications:Fully automated operation and auto 12/24V selectionRated charge/discharge current: 20AMaximum solar panel input power: 320W (12V) / 640W (24V)Maximum solar panel input voltage 50VTemperature sensor for automatic compensation: -3mV/C/2V (25C)Working temperature: -25ºC to +55ºCSelf-consumption: max. ≤9.2mA (12V); ≤11.7mA (24V)3 pairs of terminals (solar, battery, optional load)Terminals for wire up to 10mm2Multiple mounting holes for ease of installationSize: 16 x 9.5 x 5 cmWeight: 350 g Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty
Wiring guide for Solar Panel Kits in Series
...Read more
View Product
£248.99
160W (80W+80W) Solar Charging Kit With 20A Controller And 2 X 5M Cables (German Solar Cells)
We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in these solar panels. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This kit includes:2 x 80W high efficiency waterproof monocrystalline solar panels, each with 5m cable and MC4 connectors20A Photonic Universe solar charge controller 2 x 80W solar panels:This 160W system is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).Each panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panels can be used in all weather conditions.These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.20A Solar charge controller:This kit includes a powerful 20A 12V/24V solar charge controller, which is designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 20A controller is the small size - only 16 x 8cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can handle up to 320W of solar power (12V system) or 640W of solar power (24V system), so the kit can be upgraded to increase the power output by adding more solar panels, without the need to buy a new controller.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Specifications (per solar panel):Peak power: 80WMaximum power voltage: 20.2VMaximum power current: 3.96AOpen circuit voltage: 23.9VShort circuit current: 4.21APower allowance range: +/- 3%Dimensions: 700 x 670 x 30 mmWeight: 6 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors attached Charge controller specifications:Rated current 20AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 10mm2Size: 15.9 x 8.1 x 4.8 cmWeight: 300 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty
Wiring guide for Solar Panel Kits in Series
...Read more
View Product
Out of Stock
£278.99
150W 12V Solar Charging Kit (German Solar Cells) With 10A Controller, Mounting Brackets And Cables
This high efficiency 150W 12V charging kit is perfect for permanent outdoor use to provide free electricity for charging a 12V battery to power various devices for many applications such as in a camper van, boat, shed or farm.This is a complete 150W solar charging kit which includes:High efficiency 150W monocrystalline solar panel with 5m of special solar cable and waterproof connectors10A automatic solar charge controller with advanced connectivity optionsSet of 4 corner plastic brackets for bonding to the roofSet of 2 side plastic brackets for stronger supportWaterproof double entry cable gland5m of 4mm² dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminalsPair of waterproof MC4 connectors for easy connectivityUser manual with detailed installation instructions 150W solar panel:At Photonic Universe we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V solar panel charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14 x 7cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load; such as in a campervan or boat.This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:This kit includes a set of 4 plastic corner mounting brackets and 2 side mounting brackets for fixing the solar panel to the roof. The brackets can be bonded to the roof using an appropriate sealant (not included). The waterproof double cable entry gland included with the kit is perfect for getting cables from outside to inside and keeping the place fully waterproof. The kit also includes 5m dual core battery cable with a 15A fuse, fuse holder and 8mm ring terminals and a pair of MC4 connectors.Solar panel specifications:Peak power: 150WMaximum power voltage: 20.2VMaximum power current: 7.43AOpen circuit voltage: 23.9VShort circuit current: 7.89APower allowance range: +/- 3%Dimensions: 124 x 67 x 3.5 cmWeight: 9.9 kg4 mounting holes 9 x 14 mm2 x 5m of high quality single core solar cable 4.0mm cross sectionMale and female MC4 connectors Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wires up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Corner brackets specifications: Material: plastic Colour: white Size: each corner bracket 15 x 15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Weight: (4 brackets): 1.6kg Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty
...Read more
Out of Stock
£228.99
150W 12V Solar Charging Kit With 10A Controller And 5M Cable (German Solar Cells)
We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.150W solar panel:This high efficiency, waterproof 150W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of the solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 150WMaximum power voltage: 20.2VMaximum power current: 7.43AOpen circuit voltage: 23.9VShort circuit current: 7.89APower allowance range: +/- 3%Dimensions: 124 x 67 x 3.5 cmWeight: 9.9 kg4 mounting holes 9 x 14 mm2 x 5m of high quality single core solar cable 4.0mm cross sectionMale and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty
...Read more
£245.99
120W 12V Solar Charging Kit (German Solar Cells) With 10A Controller, Mounting Brackets And Cables
This high efficiency 120W 12V charging kit is perfect for permanent outdoor use to provide free electricity for charging a 12V battery to power various devices for many applications such as in a camper van, boat, shed or farm.This is a complete 120W solar charging kit which includes:High efficiency 120W monocrystalline solar panel with 5m of special solar cable and waterproof connectors10A automatic solar charge controller with advanced connectivity optionsSet of 4 corner plastic brackets for bonding to the roofSet of 2 side plastic brackets for stronger supportWaterproof double entry cable gland5m of 4mm² dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminalsPair of waterproof MC4 connectors for easy connectivityUser manual with detailed installation instructions 120W solar panel:At Photonic Universe we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V solar panel charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14 x 7cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load; such as in a campervan or boat.This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:This kit includes a set of 4 plastic corner mounting brackets and 2 side mounting brackets for fixing the solar panel to the roof. The brackets can be bonded to the roof using an appropriate sealant (not included). The waterproof double cable entry gland included with the kit is perfect for getting cables from outside to inside and keeping the place fully waterproof. The kit also includes 5m dual core battery cable with a 15A fuse, fuse holder and 8mm ring terminals and a pair of MC4 connectors.Solar panel specifications:Peak power: 120WMaximum power voltage: 20.2VMaximum power current: 5.94AOpen circuit voltage: 23.9VShort circuit current: 6.31APower allowance range: +/- 3%Dimensions: 100.5 x 67 x 3.5 cmWeight: 8.3 kg4 mounting holes 9 x 14 mm2 x 5m of high quality single core solar cable 4.0mm cross sectionMale and female MC4 connectors Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wires up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Corner brackets specifications: Material: plastic Colour: white Size: each corner bracket 15 x 15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Weight: (4 brackets): 1.6kg Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty (including a 1 year warranty for the solar charge controller, and 1 year workmanship warranty for the solar panel). For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells
...Read more
View Product
£183.99
120W 12V Solar Charging Kit With 10A Controller And 5M Cable (German Solar Cells)
we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.120W solar panel:This high efficiency, waterproof 120W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 120WMaximum power voltage: 20.2VMaximum power current: 5.94AOpen circuit voltage: 23.9VShort circuit current: 6.31APower allowance range: +/- 3%Dimensions: 100.5 x 67 x 3.5 cmWeight: 8.3 kg4 mounting holes 9 x 14 mm2 x 5m of high quality single core solar cable 4.0mm cross sectionMale and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty
...Read more
View Product
£189.99
100W (50W+50W) Solar Charging Kit With 10A Controller And 2 X 5M Cables (German Solar Cells)
we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in these solar panels. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This kit includes:2 x 50W high efficiency waterproof monocrystalline solar panels, each with 5m cable and MC4 connectors10A Photonic Universe solar charge controller 2 x 50W solar panels:This 100W system is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).Each panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panels can be used in all weather conditions.These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Specifications (per solar panel):Peak power: 50WMaximum power voltage: 20.2VMaximum power current: 2.48AOpen circuit voltage: 23.9VShort circuit current: 2.63APower allowance range: +/- 3%Dimensions: 590 x 505 x 25mmWeight: 4.2 kg4 mounting holes 6 x 9 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty
Wiring guide for Solar Panel Kits in Series
...Read more
View Product
£174.99
100W 12V Solar Charging Kit With 10A Controller And 5M Cable (German Solar Cells)
We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.100W solar panel:This high efficiency, waterproof 100W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.
Solar panel specifications:
Peak power: 100W
Maximum power voltage: 20.2V
Maximum power current: 4.95A
Open circuit voltage: 23.9V
Short circuit current: 5.26A
Power allowance range: +/- 3%
Dimensions: 845 x 670 x 30mm
Weight: 7kg
4 mounting holes 9 x 11 mm
2 x 5m of high quality single core solar cable 4.0mm cross section
Male and female MC4 connectors attached (can be cut off when wiring to the solar controller)
Charge controller specifications:
Rated current 10A
Fully automated operation and auto 12/24V selection
Wide solar input voltage range up to 50V
3 pairs of terminals (input, battery, output)
LEDs to indicate charging, battery and load
Temperature sensor for automatic compensation (-3mV/°C/2V)
Over load protection (≥1.05 times the rated discharge current)
Short circuit protection (≥2 times the rated discharge current)
Over charge / discharge, overheating and other protection features
Self-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)
Working temperature: -35C to +50C
Terminals for wire up to 4mm2
Size: 13.8 x 6.9 x 3.7 cm
Weight: 130 g
Multiple mounting holes for ease of installation
Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.
This product is covered by a 1 year warranty
...Read more
View Product
£178.99
80W 12V Solar Charging Kit (German Solar Cells) With 10A Controller, Mounting Brackets And Cable
This high efficiency 80W 12V charging kit is perfect for permanent outdoor use to provide free electricity for charging a 12V battery to power various devices for many applications such as in a camper van, boat, shed or farm.This is a complete 80W solar charging kit which includes:High efficiency 80W monocrystalline solar panel with 5m of special solar cable and waterproof connectors10A automatic solar charge controller with advanced connectivity optionsSet of 4 corner plastic brackets for bonding to the roofWaterproof double entry cable gland5m of 2.5mm² dual core battery cable fitted with a 10A fuse, fuse holder and 8mm ring terminalsPair of waterproof MC4 connectors for easy connectivityUser manual with detailed installation instructions 80W solar panel:At Photonic Universe we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V solar panel charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14 x 7cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load; such as in a campervan or boat.This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:This kit includes a set of 4 plastic corner mounting brackets for fixing the solar panel to the roof. The brackets can be bonded to the roof using an appropriate sealant (not included). The waterproof double cable entry gland included with the kit is perfect for getting cables from outside to inside and keeping the place fully waterproof. The kit also includes 5m dual core battery cable with a 10A fuse, fuse holder and 8mm ring terminals and a pair of MC4 connectors.Solar panel specifications:Peak power: 80WMaximum power voltage: 20.2VMaximum power current: 3.96AOpen circuit voltage: 23.9VShort circuit current: 4.21APower allowance range: +/- 3%Dimensions: 700 x 670 x 30 mmWeight: 6 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wires up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Corner brackets specifications: Material: plastic Colour: white Size (1 bracket): 15x15x6.5cm Weight: (4 brackets): 1.6kg Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty
...Read more
View Product
£168.99
60W 12V Solar Charging Kit (German Solar Cells) With 10A Controller, Mounting Brackets And Cables
This high efficiency 60W 12V charging kit is perfect for permanent outdoor use to provide free electricity for charging a 12V battery to power various devices for many applications such as in a camper van, boat, shed or farm.This is a complete 60W solar charging kit which includes:High efficiency 60W monocrystalline solar panel with 5m of special solar cable and waterproof connectors10A automatic solar charge controller with advanced connectivity optionsSet of 4 corner plastic brackets for bonding to the roofWaterproof double entry cable gland5m of 2.5mm² dual core battery cable fitted with a 10A fuse, fuse holder and 8mm ring terminalsPair of waterproof MC4 connectors for easy connectivityUser manual with detailed installation instructions 60W solar panel:At Photonic Universe we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V solar panel charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14 x 7cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load; such as in a campervan or boat.This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:This kit includes a set of 4 plastic corner mounting brackets for fixing the solar panel to the roof. The brackets can be bonded to the roof using an appropriate sealant (not included). The waterproof double cable entry gland included with the kit is perfect for getting cables from outside to inside and keeping the place fully waterproof. The kit also includes 5m dual core battery cable with a 10A fuse, fuse holder and 8mm ring terminals and a pair of MC4 connectors.Solar panel specifications:Peak power: 60WMaximum power voltage: 20.2VMaximum power current: 2.97AOpen circuit voltage: 23.9VShort circuit current: 3.16APower allowance range: +/- 3%Dimensions: 690 x 505 x 25 mmWeight: 4.9 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors attached Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wires up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Corner brackets specifications: Material: plastic Colour: white Size (1 bracket): 15x15x6.5cm Weight: (4 brackets): 1.6kg Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty
...Read more
View Product
Out of Stock
£136.99
40W 12V Solar Charging Kit With 10A Controller, Mounting Brackets And Cables
This high efficiency 40W 12V charging kit is perfect for permanent outdoor use to provide free electricity for charging a 12V battery to power various devices for many applications such as in a camper van, boat, shed or farm.This is a complete 40W solar charging kit which includes:High efficiency 40W monocrystalline solar panel with 5m of special solar cable and waterproof connectors10A automatic solar charge controller with advanced connectivity optionsSet of 4 corner plastic brackets for bonding to the roofWaterproof double entry cable gland5m of 2.5mm² dual core battery cable fitted with a 10A fuse, fuse holder and 8mm ring terminalsPair of waterproof MC4 connectors for easy connectivityUser manual with detailed installation instructions 40W solar panel:At Photonic Universe we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:This kit includes a set of 4 plastic corner mounting brackets for fixing the solar panel to the roof. The brackets can be bonded to the roof using an appropriate sealant (not included). The waterproof double cable entry gland included with the kit is perfect for getting cables from outside to inside and keeping the place fully waterproof. The kit also includes 5m dual core battery cable with a 10A fuse, fuse holder and 8mm ring terminals and a pair of MC4 connectors.Solar panel specifications:Peak power: 40WMaximum power voltage: 20.2VMaximum power current: 1.98AOpen circuit voltage: 23.9VShort circuit current: 2.10APower allowance range: +/- 3%Dimensions: 705 x 345 x 25mmWeight: 3.5 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wires up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Corner brackets specifications: Material: plastic Colour: white Size (1 bracket): 15x15x6.5cm Weight: (4 brackets): 1.6kg Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty
...Read more
£115.99
40W (20W+20W) Solar Charging Kit With 10A Controller And 5M Cable
This 40W solar charging kit includes:Two high efficiency 20W polycrystalline solar panels, each with 2m cableAdvanced 10A 12V/24V automatic solar charge controller with battery protection functions5m dual core battery cableUser manual with installation instructions 2 x 20W solar panels:This kit includes two waterproof high efficiency 20W solar panels which are perfect for permanent outdoor use to provide free power for charging a 12V battery to then power various devices for many applications (e.g. 12V lights, fan, water pump, electric fence etc). The kit can also be used to charge a leisure battery in a camper, caravan or boat.The long-lasting, high-efficiency, polycrystalline cells and the tough, sealed, aluminium frame on each panel will provide years and years of consistent, free power. The waterproof design ensures that the panels can be used in all weather conditions.The panels each come with 2m cable attached to the waterproof junction box on the back. Please note that the junction box protrudes approximately 0.5cm beyond the frame, which means that there must be some space left between the frame and flat surface when mounting each panel (note 1.0 - 1.5cm space under each panel is typically recommended for cooling).10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type - this setting is accessible through one of the communication methods listed below. The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:This kit also includes 5m of dual core battery cable (2.5mm cross section) for connecting the solar charge controller to the battery.Solar panel specifications (per panel):Peak power: 20WMaximum power voltage: 17.5VMaximum power current: 1.14AOpen circuit voltage: 21.6VShort circuit current: 1.23APower allowance range: +/- 3%Dimensions: 485 x 345 x 25 mmWeight: 2.0 kg4 mounting holes2m cable attached Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty provided by Photonic Universe (including a 1 year warranty for the solar charge controller and a 1 year workmanship
Wiring guide for Solar Panel Kits in Series
...Read more
View Product
Out of Stock
£96.99
40W 12V Solar Charging Kit With 10A Controller And 5M Cable (German Solar Cells)
We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.40W solar panel:This high efficiency, waterproof 40W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 40WMaximum power voltage: 20.2VMaximum power current: 1.98AOpen circuit voltage: 23.9VShort circuit current: 2.10APower allowance range: +/- 3%Dimensions: 705 x 345 x 25mmWeight: 3.5 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse and therefore delivered in a separate package.This product is covered by a 1 year warranty
...Read more
0 Kits Selected✕
Recommended Full Kits
Loading...
Loading...
Loading...
Loading...
£1,287.58
£1,019.18
£1,543.99
£2,086.26
£1,287.58
£1,019.18
£1,543.99
£2,086.26