Victron Energy - Battery Isolators - Battery Protectors
Safeguard Your Power with Victron Energy Battery Protect Range
Elevate Your Energy Management to the Next Level
In the dynamic landscape of modern power systems, safeguarding your batteries is crucial. Victron Energy's Battery Protect range emerges as an indispensable ally in this mission. Tailored to enhance the lifespan and performance of batteries in various settings - from marine to automotive, and from renewable energy systems to off-grid applications - these devices ensure your batteries are protected against common issues, leading to longer life and more efficient operation.
6 Products Found
£61.74
Victron Smart Battery protect 65A 12V/24V Battery Over Discharge Protector BPR065022000 (Bluetooth)
This Victron 65A 12/24V automatic smart battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances.
Features:
Low voltage disconnect: when battery charge is low, the Smart BatteryProtect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health.
Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs.
Overvoltage disconnect: when battery voltage gets too high, the Smart Battery Protect disconnects the loads to protect them from damage.
Bluetooth connectivity: connect your smartphone for easy programming of the voltage settings.
Automatic system recognition: the Smart BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup.
Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect.
Remote switch and alarm connections: connect input and output relays to control the Smart BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems.
Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging.
System Specifications:
Nominal battery voltage: 12V / 24V
Operating voltage range: 6 - 35V
Maximum continuous current: 65A
Peak current (30 seconds): 250A
Current draw: <1.5mA active, <0.6mA during disconnect
Alarm Relay: 50mA
Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C)
Dimensions:
Dimensions: 40 x 48 x 106 mm
Weight: 200g
Battery Protect Advantages
Automatic smart battery protectors offer protection for the discharging of your battery system, preserving your battery health and protecting appliances.
Victron Energy offers a range of discharge protectors which are designed to protect a battery bank from over-discharge and extend its lifespan. The discharge protectors offer several advantages and functionality including:
-Protecting the battery bank: The discharge protectors protect the battery bank from over-discharge by disconnecting the load when the battery's state of charge (SOC) reaches a certain level. This helps to extend the lifespan of the battery bank by preventing deep discharge cycles.
Customizable settings : The discharge protectors have customizable settings, this allows you to set the SOC level at which the load will be disconnected, and also set the reconnection level, depending on your needs and the type of battery you are using.
-Advanced monitoring and control: The discharge protectors can be connected to a network for remote monitoring and control, this allows you to monitor the status of the battery bank and adjust settings as needed.
-Compatible with other victron energy product: The discharge protectors can work seamlessly with other Victron Energy products such as the Multiplus inverter/charger, and GX devices for advanced monitoring and control.
-Easy installation : The discharge protectors are easy to install and they are compatible with different types of battery, you can use them with lead-acid, lithium-ion, and other types of battery.
-Reliability: The discharge protectors are built with high-quality and durable components, which ensures reliable and long-lasting performance.
Overall, Victron Energy discharge protectors are a useful addition to a battery bank and can help to extend its lifespan by preventing over-discharge. They are easy to install and customizable settings, compatible with different types of batteries, and allow advanced monitoring and control, which makes them suitable for a wide range of applications.
...Read more
View Product
£91.93
Victron Battery protect 220A 12V/24V Battery Over Discharge Protector BPR000220400
This Victron 220A 12/24V automatic battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances.
Features:
Low voltage disconnect: when battery charge is low, the Battery Protect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health.
Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs.
Overvoltage disconnect: when battery voltage gets too high, the BatteryProtect disconnects the loads to protect them from damage.
Automatic system recognition: the BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup.
Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect.
Remote switch and alarm connections: connect input and output relays to control the BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems.
Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging.
System Specifications:
Nominal battery voltage: 12V / 24V
Operating voltage range: 6 - 35V
Maximum continuous current: 220A
Peak current (30 seconds): 600A
Current draw: <1.5mA active, <0.6mA during disconnect
Alarm Relay: 50mA
Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C)
Dimensions:
Dimensions: 62 x 123 x 120 mm
Weight: 800g
M8 terminals
Battery Protect Advantages
Automatic smart battery protectors offer protection for the discharging of your battery system, preserving your battery health and protecting appliances.
Victron Energy offers a range of discharge protectors which are designed to protect a battery bank from over-discharge and extend its lifespan. The discharge protectors offer several advantages and functionality including:
-Protecting the battery bank: The discharge protectors protect the battery bank from over-discharge by disconnecting the load when the battery's state of charge (SOC) reaches a certain level. This helps to extend the lifespan of the battery bank by preventing deep discharge cycles.
Customizable settings : The discharge protectors have customizable settings, this allows you to set the SOC level at which the load will be disconnected, and also set the reconnection level, depending on your needs and the type of battery you are using.
-Advanced monitoring and control: The discharge protectors can be connected to a network for remote monitoring and control, this allows you to monitor the status of the battery bank and adjust settings as needed.
-Compatible with other victron energy product: The discharge protectors can work seamlessly with other Victron Energy products such as the Multiplus inverter/charger, and GX devices for advanced monitoring and control.
-Easy installation : The discharge protectors are easy to install and they are compatible with different types of battery, you can use them with lead-acid, lithium-ion, and other types of battery.
-Reliability: The discharge protectors are built with high-quality and durable components, which ensures reliable and long-lasting performance.
Overall, Victron Energy discharge protectors are a useful addition to a battery bank and can help to extend its lifespan by preventing over-discharge. They are easy to install and customizable settings, compatible with different types of batteries, and allow advanced monitoring and control, which makes them suitable for a wide range of applications.
...Read more
View Product
£117.69
Victron Smart Batteryprotect 220A 12V/24V Battery Over Discharge Protector BPR122022000 (Bluetooth )
This Victron 220A 12/24V automatic smart battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances.
Features:
Low voltage disconnect: when battery charge is low, the Smart BatteryProtect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health.
Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs.
Overvoltage disconnect: when battery voltage gets too high, the Smart Battery Protect disconnects the loads to protect them from damage.
Bluetooth connectivity: connect your smartphone for easy programming of the voltage settings.
Automatic system recognition: the Smart BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup.
Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect.
Remote switch and alarm connections: connect input and output relays to control the Smart BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems.
Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging.
System Specifications:
Nominal battery voltage: 12V / 24V
Operating voltage range: 6 - 35V
Maximum continuous current: 220A
Peak current (30 seconds): 600A
Current draw: <1.5mA active, <0.6mA during disconnect
Alarm Relay: 50mA
Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C)
Dimensions:
Dimensions: 62 x 123 x 120 mm
Weight: 800g
M8 terminals
Battery Protect Advantages
Automatic smart battery protectors offer protection for the discharging of your battery system, preserving your battery health and protecting appliances.
Victron Energy offers a range of discharge protectors which are designed to protect a battery bank from over-discharge and extend its lifespan. The discharge protectors offer several advantages and functionality including:
-Protecting the battery bank: The discharge protectors protect the battery bank from over-discharge by disconnecting the load when the battery's state of charge (SOC) reaches a certain level. This helps to extend the lifespan of the battery bank by preventing deep discharge cycles.
Customizable settings : The discharge protectors have customizable settings, this allows you to set the SOC level at which the load will be disconnected, and also set the reconnection level, depending on your needs and the type of battery you are using.
-Advanced monitoring and control: The discharge protectors can be connected to a network for remote monitoring and control, this allows you to monitor the status of the battery bank and adjust settings as needed.
-Compatible with other victron energy product: The discharge protectors can work seamlessly with other Victron Energy products such as the Multiplus inverter/charger, and GX devices for advanced monitoring and control.
-Easy installation : The discharge protectors are easy to install and they are compatible with different types of battery, you can use them with lead-acid, lithium-ion, and other types of battery.
-Reliability: The discharge protectors are built with high-quality and durable components, which ensures reliable and long-lasting performance.
Overall, Victron Energy discharge protectors are a useful addition to a battery bank and can help to extend its lifespan by preventing over-discharge. They are easy to install and customizable settings, compatible with different types of batteries, and allow advanced monitoring and control, which makes them suitable for a wide range of applications.
...Read more
View Product
£55.94
Victron Battery protect 100A 12V/24V Battery Over Discharge Protector BPR000100400
This Victron 100A 12/24V automatic battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances.
Features:
Low voltage disconnect: when battery charge is low, the Battery Protect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health.
Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs.
Overvoltage disconnect: when battery voltage gets too high, the BatteryProtect disconnects the loads to protect them from damage.
Automatic system recognition: the BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup.
Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect.
Remote switch and alarm connections: connect input and output relays to control the BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems.
Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging.
System Specifications:
Nominal battery voltage: 12V / 24V
Operating voltage range: 6 - 35V
Maximum continuous current: 100A
Peak current (30 seconds): 600A
Current draw: <1.5mA active, <0.6mA during disconnect
Alarm Relay: 50mA
Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C)
Dimensions:
Dimensions: 59 x 42 x 115 mm
Weight: 500g
M8 terminals
Battery Protect Advantages
Automatic smart battery protectors offer protection for the discharging of your battery system, preserving your battery health and protecting appliances.
Victron Energy offers a range of discharge protectors which are designed to protect a battery bank from over-discharge and extend its lifespan. The discharge protectors offer several advantages and functionality including:
-Protecting the battery bank: The discharge protectors protect the battery bank from over-discharge by disconnecting the load when the battery's state of charge (SOC) reaches a certain level. This helps to extend the lifespan of the battery bank by preventing deep discharge cycles.
Customizable settings : The discharge protectors have customizable settings, this allows you to set the SOC level at which the load will be disconnected, and also set the reconnection level, depending on your needs and the type of battery you are using.
-Advanced monitoring and control: The discharge protectors can be connected to a network for remote monitoring and control, this allows you to monitor the status of the battery bank and adjust settings as needed.
-Compatible with other victron energy product: The discharge protectors can work seamlessly with other Victron Energy products such as the Multiplus inverter/charger, and GX devices for advanced monitoring and control.
-Easy installation : The discharge protectors are easy to install and they are compatible with different types of battery, you can use them with lead-acid, lithium-ion, and other types of battery.
-Reliability: The discharge protectors are built with high-quality and durable components, which ensures reliable and long-lasting performance.
Overall, Victron Energy discharge protectors are a useful addition to a battery bank and can help to extend its lifespan by preventing over-discharge. They are easy to install and customizable settings, compatible with different types of batteries, and allow advanced monitoring and control, which makes them suitable for a wide range of applications.
...Read more
View Product
£79.95
Victron Smart Batteryprotect 100A 12V/24V Battery Over Discharge Protector Sbp-100 (Bluetooth Inbuilt)
This Victron 100A 12/24V automatic smart battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances.
Features:
Low voltage disconnect: when battery charge is low, the Smart BatteryProtect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health.
Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs.
Overvoltage disconnect: when battery voltage gets too high, the Smart Battery Protect disconnects the loads to protect them from damage.
Bluetooth connectivity: connect your smartphone for easy programming of the voltage settings.
Automatic system recognition: the Smart BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup.
Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect.
Remote switch and alarm connections: connect input and output relays to control the Smart BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems.
Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging.
System Specifications:
Nominal battery voltage: 12V / 24V
Operating voltage range: 6 - 35V
Maximum continuous current: 100A
Peak current (30 seconds): 600A
Current draw: <1.5mA active, <0.6mA during disconnect
Alarm Relay: 50mA
Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C)
Dimensions:
Dimensions: 59 x 42 x 115 mm
Weight: 500g
M8 terminals
Battery Protect Advantages
Automatic smart battery protectors offer protection for the discharging of your battery system, preserving your battery health and protecting appliances.
Victron Energy offers a range of discharge protectors which are designed to protect a battery bank from over-discharge and extend its lifespan. The discharge protectors offer several advantages and functionality including:
-Protecting the battery bank: The discharge protectors protect the battery bank from over-discharge by disconnecting the load when the battery's state of charge (SOC) reaches a certain level. This helps to extend the lifespan of the battery bank by preventing deep discharge cycles.
Customizable settings : The discharge protectors have customizable settings, this allows you to set the SOC level at which the load will be disconnected, and also set the reconnection level, depending on your needs and the type of battery you are using.
-Advanced monitoring and control: The discharge protectors can be connected to a network for remote monitoring and control, this allows you to monitor the status of the battery bank and adjust settings as needed.
-Compatible with other victron energy product: The discharge protectors can work seamlessly with other Victron Energy products such as the Multiplus inverter/charger, and GX devices for advanced monitoring and control.
-Easy installation : The discharge protectors are easy to install and they are compatible with different types of battery, you can use them with lead-acid, lithium-ion, and other types of battery.
-Reliability: The discharge protectors are built with high-quality and durable components, which ensures reliable and long-lasting performance.
Overall, Victron Energy discharge protectors are a useful addition to a battery bank and can help to extend its lifespan by preventing over-discharge. They are easy to install and customizable settings, compatible with different types of batteries, and allow advanced monitoring and control, which makes them suitable for a wide range of applications.
...Read more
View Product
£42.39
Victron Batteryprotect 65A 12V/24V Battery Over Discharge Protector BPR000065400
This Victron 65A 12/24V automatic battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances.
Features:
Low voltage disconnect: when battery charge is low, the Battery Protect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health.
Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs.
Overvoltage disconnect: when battery voltage gets too high, the BatteryProtect disconnects the loads to protect them from damage.
Automatic system recognition: the BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup.
Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect.
Remote switch and alarm connections: connect input and output relays to control the BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems.
Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging.
System Specifications:
Nominal battery voltage: 12V / 24V
Operating voltage range: 6 - 35V
Maximum continuous current: 65A
Peak current (30 seconds): 250A
Current draw: <1.5mA active, <0.6mA during disconnect
Alarm Relay: 50mA
Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C)
Dimensions:
Dimensions: 40 x 48 x 106 mm
Weight: 200g
Battery Protect Advantages
Automatic smart battery protectors offer protection for the discharging of your battery system, preserving your battery health and protecting appliances.
Victron Energy offers a range of discharge protectors which are designed to protect a battery bank from over-discharge and extend its lifespan. The discharge protectors offer several advantages and functionality including:
-Protecting the battery bank: The discharge protectors protect the battery bank from over-discharge by disconnecting the load when the battery's state of charge (SOC) reaches a certain level. This helps to extend the lifespan of the battery bank by preventing deep discharge cycles.
Customizable settings : The discharge protectors have customizable settings, this allows you to set the SOC level at which the load will be disconnected, and also set the reconnection level, depending on your needs and the type of battery you are using.
-Advanced monitoring and control: The discharge protectors can be connected to a network for remote monitoring and control, this allows you to monitor the status of the battery bank and adjust settings as needed.
-Compatible with other victron energy product: The discharge protectors can work seamlessly with other Victron Energy products such as the Multiplus inverter/charger, and GX devices for advanced monitoring and control.
-Easy installation : The discharge protectors are easy to install and they are compatible with different types of battery, you can use them with lead-acid, lithium-ion, and other types of battery.
-Reliability: The discharge protectors are built with high-quality and durable components, which ensures reliable and long-lasting performance.
Overall, Victron Energy discharge protectors are a useful addition to a battery bank and can help to extend its lifespan by preventing over-discharge. They are easy to install and customizable settings, compatible with different types of batteries, and allow advanced monitoring and control, which makes them suitable for a wide range of applications.
...Read more
View Product
0 Kits Selected✕
Key Features of Victron Energy Battery Protect
-
Advanced Battery Protection: The primary function of the Battery Protect range is to shield your batteries from over-discharge and over-charge, common issues that can significantly shorten battery life. These devices intelligently disconnect the battery from non-critical loads before it's fully discharged or when overcharged.
-
Programmable Cut-Off Levels: Victron's Battery Protect devices come with adjustable cut-off levels. This feature allows you to customize the protection based on the specific needs of your battery type and application, ensuring optimal protection.
-
Compact and Durable Design: Designed with a focus on durability and ease of use, these units are compact and robust, making them suitable for installation in tight spaces and harsh environments.
-
Wide Range of Applications: Whether it's for a solar power system, a boat, an RV, or an industrial application, the Battery Protect range is versatile enough to fit seamlessly into various types of power systems.
-
Low Power Consumption: These devices are designed to be energy-efficient, consuming minimal power. This feature is particularly important in systems where conserving energy is crucial, such as in off-grid applications.
-
Easy Installation and Integration: Victron Energy ensures that its Battery Protect devices are user-friendly, with straightforward installation and compatibility with other components in your power system.
Enhanced System Efficiency and Longevity
By protecting your batteries from harmful conditions, the Battery Protect range not only safeguards your investment but also enhances the overall efficiency and longevity of your power system. This leads to reduced maintenance costs and less frequent battery replacements.
Environmental Responsibility
In line with Victron Energy's commitment to environmental sustainability, the Battery Protect range contributes to the efficient and responsible use of energy. By optimizing battery usage and preventing energy wastage, these devices play a part in promoting eco-friendly power solutions.
Conclusion
The Victron Energy Battery Protect range is more than just a set of products; it represents a commitment to quality, efficiency, and reliability in power management. For anyone seeking to maximize their battery life and ensure the stability of their power systems, these devices offer an ideal solution. Choose Victron Energy Battery Protect for peace of mind and a more efficient power system.
Recommended Full Kits
Loading...
£2,798.31
£3,231.11
£2,798.31
£3,448.11
£3,231.11
Loading...
£3,559.58
£3,508.58
£2,798.31
£3,231.11
Loading...
£3,960.58
£3,610.58
£3,610.58
£3,460.58
£3,610.58
£3,448.11
£3,460.58
Loading...
£1,287.58
£1,019.18
£1,543.99
£2,086.26
£2,408.61
£2,036.61
£1,287.58
£1,019.18
£1,543.99
£2,086.26