This Victron 220A 12/24V automatic battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances.
Low voltage disconnect: when battery charge is low, the Battery Protect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health.
Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs.
Overvoltage disconnect: when battery voltage gets too high, the BatteryProtect disconnects the loads to protect them from damage.
Automatic system recognition: the BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup.
Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect.
Remote switch and alarm connections: connect input and output relays to control the BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems.
Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging.
- Nominal battery voltage: 12V / 24V
- Operating voltage range: 6 - 35V
- Maximum continuous current: 220A
- Peak current (30 seconds): 600A
- Current draw: <1.5mA active, <0.6mA during disconnect
- Alarm Relay: 50mA
- Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C)
- Dimensions: 62 x 123 x 120 mm
- Weight: 800g
- M8 terminals