260W Victron Energy Van Solar Panel Kit (2 * 130w Panels) Perfect for Campervans, Motorhomes & Caravans
Panel sizes are 1200x668x30mm
This 260w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• High performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m red & black extension leads
Full Kit with Victron 2 * 130W Monocrystalline panels, 8 x Z Brackets or plastic corner fixing brackets, Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/20 MPPT charge controller, 10m of PV Cable & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cable with In-Line Fuse.
This highly efficient Victron solar 260w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications.
Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances
The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions.
This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries.
Wiring guide for Solar Panel Kits in Series
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
185W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats
Panel sizes are 1485x668x30mm
This 185w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron Smartsolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• High performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads
Full Kit with Victron 185W Monocrystalline panel, optional plastic or aluminium mounting brackets, Cable entry Gland, Victron 75/15 Smartsolar MPPT charge controller, 10m of Black PV Cable (2 x 5m) & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cables with In-Line Fuse.
Mounts Optional:
6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets
Ideal for charging battery banks up to 250ah
This highly efficient Victron solar 185w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications.
Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances
The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions.
This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries.
Solar Panel Specifications
Watts
185
Maximum Power Voltage - Vmpp(V)
19.68
Maximum Power Current - Impp(A)
9.41
Open Circuit Voltage - Voc(V)
24.11
Short Circuit Current - Isc (A)
9.91
Height (mm)
1485
Width (mm)
668
Thickness (mm)
30
Weight (KG)
11
Cell Type
Mono
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
230W Victron Energy Van Solar Panel Kit (2 * 115w Panels) Perfect for Campervans, Motorhomes & Caravans
Panel sizes are 1015x668x30mm
This 230w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• High performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m red & black extension leads
Full Kit with Victron 2 * 115W Monocrystalline panels, 8 x Z Brackets or plastic corner fixing brackets, Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/20 MPPT charge controller, 10m of PV Cable & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cable with In-Line Fuse.
This highly efficient Victron solar 230w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications.
Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances
The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions.
This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries.
Wiring guide for Solar Panel Kits in Series
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
250w Large Solar Panel Kit with Victron Smartsolar MPPT - Perfect for Campervans, Caravans & Motorhomes
250w Solar panel kit including:Monocrystalline Panel - Dimensions: 1630 x 770 x 35mmVictron 100/20 Smartsolar MPPT Solar Charge Controller2 x black 5m 6mm PV Solar Cable with MC4 Connectors4 x Z Bracket Mounts or 7 Piece ABS Plastic Solar Panel Mount Kit with Double Entry Roof Gland
1 x Resettable Circuit Breaker
1 x MPPT to Battery set of Cables with In-Line Fuse.
This panel has bifacial solar technology to capture sunlight on both the front and rear surfaces, significantly increasing energy output by harnessing reflected light from the roof.
This high efficiency, waterproof 250W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller.
The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.
Solar panel specifications:
Peak power: 250W
Maximum power voltage: 39.02V
Maximum power current: 6.41A
Open circuit voltage: 45.45V
Short circuit current: 6.82A
Power allowance range: +/- 3%
Dimensions: 1630 x 770 x 35mm
Weight: 13.5 kg
4 mounting holes
2 x 60cm of high quality single core solar cable 4.0mm cross section
Male and female MC4 connectors
Features of the Victron SmartSolar MPPT 100/20:• Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetoothenabled device• Ultra-fast Maximum Power Point Tracking (MPPT)• Advanced Maximum Power Point Detection in case of partial shading conditions• Load output on the small models• Battery Life: intelligent battery management by load shedding• Automatic battery voltage recognition• Flexible charge algorithm• Over-temperature protection and power de-rating when temperature is high.Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Advantages of SolarSolar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
200w Large Solar Panel Kit with Victron Smartsolar MPPT - Perfect for Campervans, Caravans & Motorhomes
200w Solar panel kit includes:Monocrystalline Panel - Dimensions: 1038mm x 992mmVictron 75/15 Smartsolar MPPT Solar Charge Controller2 x black 5m 6mm PV Solar Cable with MC4 ConnectorsOPTIONAL - 7 Piece ABS Plastic Solar Panel Mount Kit OR Z Bracket mounts with Double Entry Roof GlandResettable Circuit BreakerMppt to Battery Cables with In-Line Fuse
This 200w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
This high efficiency, waterproof 200W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).
The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller.
The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.
This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.
Solar panel specifications:
Peak power: 200W
Maximum power voltage: 17.49V
Maximum power current: 11.44A
Open circuit voltage: 21.12V
Short circuit current: 12.24A
Power allowance range: +/- 3%
Dimensions: 1038 x 992 x 30mm
Weight: 10.5 kg
8 mounting holes
2 x 90cm of high quality single core solar cable (4.0mm cross section)
Male and female MC4 connectors
Features of the Victron SmartSolar MPPT 75/15:• Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetoothenabled device• Ultra-fast Maximum Power Point Tracking (MPPT)• Advanced Maximum Power Point Detection in case of partial shading conditions• Load output on the small models• Battery Life: intelligent battery management by load shedding• Automatic battery voltage recognition• Flexible charge algorithm• Over-temperature protection and power de-rating when temperature is high.Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
320w Large Solar Panel Kit with Victron Smartsolar MPPT - Perfect for Campervans, Motorhomes & Off Grid Projects
This large 320w Rigid Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and battery charging efficiency. The ETFE covering makes the solar panel extremely durable and resistant. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
320w Solar panel kit including:
Monocrystalline Panel - Dimensions: 179 x 99 x 4 cm Victron 100/30 Smartsolar MPPT Solar Charge Controller 2 x black 5m 6mm PV Solar Cable with MC4 Connectors 2 x 5m (6mm) solar extension cables with MC4 connectors8 x Z Brackets or 7 Piece ABS Plastic Solar Panel Mount Kit with Double Entry Roof Gland1 x Ressetable Circuit Breaker1 x MPPT to Battery Cables with In-Line Fuse
This high-efficiency 320W monocrystalline solar panel is one of the largest solar panels available on the market. It is perfect for permanent outdoor use to provide free electricity in any grid-tie, hybrid or off-grid application (such as charging batteries in vehicles or boats, or powering an off-grid house or cabin, or working with a grid-tie / hybrid inverter to feed energy into the electrical grid). Due to the size of the area that this solar panel covers it is great for large systems where the time and cost associated with fitting a high-wattage array needs to be minimised. In order to achieve high output this solar panel uses innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel for the same power rating. On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system. The panel is encased in a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. The waterproof design and non-corrosive materials ensure that the panel can be used in all weather conditions and locations, including marine applications where contact with sea water is likely. Each individual solar panel is thoroughly tested to the highest quality standards, and labeled with a unique serial number for further quality control and increased warranty protection.
Solar panel specifications:
Peak power: 320W
Maximum power voltage: 18.35V
Maximum power current: 17.88A
Open circuit voltage: 21.85V
Short circuit current: 19.04A
Power allowance range: +/- 3%
Dimensions: 179 x 99 x 4 cm
Weight: 19.5 kg
8 mounting holes 9 x 14 mm
2 x 5m of high quality single core solar cable (6.0mm cross section)
Male and female MC4 connectors
Features of the Victron SmartSolar MPPT 100/30:
Feature highlights • Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetooth enabled device • Ultra-fast Maximum Power Point Tracking (MPPT) • Advanced Maximum Power Point Detection in case of partial shading conditions • Load output on the small models • Battery Life: intelligent battery management by load shedding • Automatic battery voltage recognition • Flexible charge algorithm • Over-temperature protection and power de-rating when temperature is high.
Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
300w Large Solar Panel Kit with Victron Smartsolar MPPT
This 300w Rigid Solar Panel Kit for campervans, off-grid, motorhomes and yachts/boats includes a Victron SmartSolar MPPT 100/30 charge controller for maximum power output and battery charging efficiency. The ETFE covering makes the solar panel extremely durable and resistant. This 300w solar panel kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
300w solar panel kit including:
Monocrystalline Panel - Dimensions: 164 x 99 x 3.5 cmVictron 100/30 Smartsolar MPPT Solar Charge Controller2 x black 5m 6mm PV Solar Cable with MC4 Connectors2 x 5m (6mm) solar extension cables with MC4 connectors7 Piece ABS Plastic Solar Panel Mount Kit with Double Entry Roof Gland
This high efficiency 300W monocrystalline solar panel is one of the largest solar panels available on the market. It is perfect for permanent outdoor use to provide free electricity in any grid-tie, hybrid or off-grid application (such as charging batteries in vehicles or boats, or powering an off-grid house or cabin, or working with a grid-tie / hybrid inverter to feed energy into the electrical grid). Due to the size of the area that this solar panel covers it is great for large systems where the time and cost associated with fitting a high wattage array needs to be minimised.In order to achieve high output this solar panel uses innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel for the same power rating.On the back of the 300w solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.The panel is encased in a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. The waterproof design and non-corrosive materials ensure that the panel can be used in all weather conditions and locations, including marine applications where contact with sea water is likely.Each individual 300w solar panel is thoroughly tested to the highest quality standards, and labeled with a unique serial number for further quality control and increased warranty protection.
Specifications:
Peak power: 300W
Maximum power voltage: 32.70V
Maximum power current: 9.17A
Open circuit voltage: 39.80V
Short circuit current: 9.78A
Power tolerance: 0/+3%
Dimensions: 164 x 99 x 3.5 cm
Weight: 19 kg
Mounting holes for installation
2 x 1m of high quality single core solar cable 4.0mm² cross section
Male and female MC4 connectors
Features of the Victron SmartSolar MPPT 100/30:
Feature highlights• Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetoothenabled device• Ultra-fast Maximum Power Point Tracking (MPPT)• Advanced Maximum Power Point Detection in case of partial shading conditions• Load output on the small models• Battery Life: intelligent battery management by load shedding• Automatic battery voltage recognition• Flexible charge algorithm• Over-temperature protection and power de-rating when the temperature is high.
Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
This 185w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency.This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
Victron Energy Solar Panel 12V 185W Mono series 4a
Low voltage-temperature coefficient enhances high-temperature operation.
Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
25-Year limited warranty on power output and performance.
5-Year limited warranty on materials and workmanship.
Sealed, waterproof, multi-functional junction box gives high level of safety.
High performance bypass diodes minimize the power drop caused by shade.
Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.
Victron Energy SmartSolar MPPT 75V 15A
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Features
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.
Programmable battery charge algorithm
See the software section on our website for details
Day/night timing and light dimming option
See the software section on Victron for details
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
Victron Energy Solarcable L=5m/4sqmm MC4-M/F
5m/4spmm MC4-M/F of Solarcable
Z Bracket Mounting Aluminium Fixing Set
These brackets are made from 2mm aluminium
Included:
4x Z-Shape Tabbed Solar Panel Brackets
8x Stainless Steel Self Tapping Screws
4x Stainless Steel Spring Washers
4x Stainless Steel Short Bolts
4x Stainless Steel Washers
4x Stainless Steel Nuts
Brand
Victron Energy
Manufacturer Part Number
SPM041851200, SCC075015060R, 2x SCA000500000 and Z Bracket
Solar Panel Voltage
12V
Nominal Power
175W
Cell Type
Monocrystalline
Number of Cells in Series
36
Maximum System Voltage
1000V
Solar Panel Dimensions
L1485 x W668 x D30mm
Solar Panel Weight
11Kg
Solar Panel Country of Manufacture
China
MPPT Voltage
12/24V
Rated Charge Current
15A
Nominal PV Power, 12V
220W
Max. PV Short Circuit Current
15A
Max. PV Open Circuit Voltage
75V
Protection Category
IP43 (electronic components), IP22 (connection area)
Efficiency
98%
Bluetooth Enabled
Yes
MPPT Dimensions
H100 x W113 x D40mm
MPPT Weight
0.5Kg
MPPT Country of Manufacture
India
Cable Length
5m
Cable Thickness
4sqmm
Cable Country of Manufacture
China
Warranty
5 Years
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
330w Premium Large Solar Panel Kit with Victron Smartsolar MPPT perfect for Campervan Off-Grid Living
This large 330w Rigid Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and battery charging efficiency. The ETFE covering makes the solar panel extremely durable and resistant. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications.
330w Premium Solar panel kit including:
Sharp NU-JC Monocrystalline Panel - Dimensions - 1684 x 1002 x 40mmVictron 100/30 Smartsolar MPPT Solar Charge Controller2 x black 5m 6mm PV Solar Cable with MC4 Connectors7 Piece ABS Plastic Solar Panel Mount Kit with Double Entry Roof Gland or Z-Brackets1 x Ressetable Circuit Breaker1 x MPPT to Battery cable set with in-line fuse.
This MCS-certified panel is perfect for a wide variety of applications, from grid-tie household systems to off-grid installations where mains power is limited or unavailable such as boats, caravans, campervans, cabins or glamping huts. These high-power panels are ideal for large systems where the time and expense of fitting a high-wattage array needs to be minimised.
High-efficiency solar cells use PERC technology with 5 busbars to extract more power from a smaller surface area, increasing the output of the panel without increasing the size. Half-cut cell construction decreases internal losses, reduces risk of hotspots and improves performance in shaded conditions.
The robust design of the panel is IP68 (waterproof) rated, and tested for resistance against PID, salt mist, ammonia, heavy snow, dust and sand. This thorough testing ensures a long service life even in harsh marine or wilderness conditions. A pair of male/female MC4 connectors are crimped on the end of the cable for easy waterproof connection to other solar panels, extension leads or your existing system.
With a 15-year workmanship guarantee and 25-year output guarantee, you can be confident in the quality, durability and longevity of this premium solar panel.
Features of the Victron SmartSolar MPPT 100/30:
Feature highlights• Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetoothenabled device• Ultra-fast Maximum Power Point Tracking (MPPT)• Advanced Maximum Power Point Detection in case of partial shading conditions• Load output on the small models• Battery Life: intelligent battery management by load shedding• Automatic battery voltage recognition• Flexible charge algorithm• Over-temperature protection and power de-rating when temperature is high.
Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Advantages of Solar
Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.
One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.
Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.
Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.
In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.
Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
200w Slimedge Lightweight Solar Panel Kit with Victron SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs)
10 YEAR PANEL WARRANTY!
This 200w Lightweight Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.
Kit Contents
200w Ultra Lightweight Rigid Black Solar Panel 1513 x 807 x 12 mm
Victron Energy SmartSolar MPPT 75/15
Sikaflex 522 Caravan / Motorhome Adhesive
1 x MPPT to Battery Cable set with In-Line Fuse
10 year warranty on the Solar Panel
5 year warranty on Victron MPPT
Scanstrut Roof Gland - Black
Panel Specifications
Peak power: 200W
Open circuit voltage: 28.5V
Dimensions: 1513mm x 807mm x 12 mm
Weight: 3.65 kg
SlimEdge panels are a gamechanger, they come with all the benefits of a rigid panel and the lightweight construction of a flexible panel, making them perfect for pop tops.
Shingled Monocrystalline Cells - Convert more sunlight into electricity, with a design that maximises surface area - perfect for tight spaces like caravans and campers.
Discreet Inbuilt Fixing Brackets - Quick, easy installation with a sleek, low-profile design. It also helps reduce vehicle height for a cleaner, more aerodynamic look.
Up to 50% Lighter Than Traditional Rigid Panels - Improved Fuel Economy - Lighter weight helps reduce fuel costs.
Sturdy Anodised Aluminium Frame - Sleek, Modern Appearance: Adds a stylish edge to your setup.
Durability & Corrosion Resistance: Built to withstand even the toughest outdoor conditions.
Easy Installation: A rigid frame ensures the panel is easy to mount with no flexing.
10-Year Panel Warranty - Enjoy peace of mind knowing your panel is protected against premature failure, and offers
long-lasting reliability.
This premium quality 300W 12V/24V solar charging kit is one of the most powerful solar charging kits for vehicles, boats or off-grid power systems. It can generate up to 17A charging current when charging a 12V battery, which means that a typical 100Ah battery will be charged from 0% to 100% in about 6 hours of bright sunlight.This 300W 12V/24V solar charging kit includes:High quality 300W monocrystalline solar panel fitted with 0.9m of 4.0mm solar cable and waterproof MC4 connectors20A 12V/24V high efficiency MPPT solar charge controller with an LCD displaySet of 4 corner plastic mounting brackets for bonding to the roofSet of 4 side mounting brackets for bonding to the roofWaterproof double entry cable gland5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel5m of 6.0mm dual core battery cable 300W monocrystalline solar panel:The high efficiency, waterproof 300W monocrystalline solar panel included in this kit has been manufactured to the highest standards. Each individual solar panel is thoroughly tested and labelled with a unique serial number for further quality control and increased warranty protection. It is ideal for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries.The panel is fitted with 2 x 0.9m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to the 5m single core extension cable supplied with the kit.20A MPPT solar charge controller:This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers.The controller features a comprehensive set of electronic protection functions such as stopping reverse current at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and protection against deep discharge, over voltage, over load, short circuit and reverse polarity. The LCD display shows various charging parameters such as voltage, current and power for the solar panel and the battery.Multiple connectivity options:This solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.The controller can automatically recognise 12V/24V battery systems. Note: in order to start the solar charge controller in the correct voltage mode, a working battery should always be connected to the controller first before connecting the solar panel.Additional items:This kit also includes 5m positive and negative extension leads for connecting the solar panel to the solar charge controller, a 5m 6.0mm dual core battery cable for use between the solar charge controller and your battery, a set of 4 corner and 4 side mounting brackets for fixing the solar panel to the roof using an appropriate sealant (not included) and a waterproof double cable entry gland for keeping the cable connection fully waterproof when mounting the panel outside and feeding the solar cables inside the vehicle / building / below deck.Solar panel specifications:Peak power: 300WMaximum power voltage: 32.70VMaximum power current: 9.17AOpen circuit voltage: 39.80VShort circuit current: 9.78APower tolerance: 0/+3%Dimensions: 164 x 99 x 3.5 cmWeight: 19 kgMounting holes for installation2 x 1m of high quality single core solar cable 4.0mm² cross sectionMale and female MC4 connectors Charge controller specifications:The most advanced MPPT technology to ensure high efficiency of your solar systemFully automated operation and auto 12V/24V charging voltage selection3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2Maximum solar panel voltage 100VMaximum solar panel power 260W (12V) / 520W (24V)Comprehensive electronic protectionSelf-consumption: less than 20mAWorking temperature: -25C to +45CSize: 17 x 14 x 4.5 cmWeight: 1.1 kgMultiple mounting holes for ease of installation Mounting accessory specifications:Material: plasticColour: whiteCable diameter for the cable gland: 3-7mmSize: each corner bracket 15 x15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cmCombined weight: 2.7kg Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The product is covered by a 1 year warranty. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.
305w Large Solar Panel Kit with Victron Smartsolar MPPT - Perfect for Campervans, Caravans & Motorhomes
305w Victron Monocrystalline Solar panel kit including:Monocrystalline Panel - Dimensions: 1658 x 1002 x 35mmVictron 100/30 Smartsolar MPPT Solar Charge Controller2 x black 5m 6mm PV Solar Cable with MC4 Connectors4 x Z Bracket Mounts or 7 Piece ABS Plastic Solar Panel Mount Kit with Double Entry Roof Gland
1 x Resettable Circuit Breaker
1 x MPPT to Battery set of Cables with In-Line Fuse.
This high efficiency, 305w monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller.
The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.
Solar panel specifications:
Brand
Victron Energy
Manufacturer Part Number
SPM043052002
gtin
8719076057772
Voltage
20V
Nominal Power
305W
Cell Type
Monocrystalline
Number of Cells in Series
72
Maximum System Voltage
1000V
Dimensions
L1658 x W1002 x D35mm
Weight
19Kg
Warranty
5 Years
Features of the Victron SmartSolar MPPT 100/30:• Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetoothenabled device• Ultra-fast Maximum Power Point Tracking (MPPT)• Advanced Maximum Power Point Detection in case of partial shading conditions• Load output on the small models• Battery Life: intelligent battery management by load shedding• Automatic battery voltage recognition• Flexible charge algorithm• Over-temperature protection and power de-rating when temperature is high.Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Advantages of SolarSolar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.
we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.200W solar panel:This high efficiency, waterproof 200W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to to other solar panels, your existing system or 6mm extension cable (the MC4 connectors can also be cut off when wiring to the screw terminals of the solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.20A Solar charge controller:This kit includes a powerful 20A 12V/24V solar charge controller, which is designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 20A controller is the small size - only 16 x 8cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can handle up to 320W of solar power (12V system) or 640W of solar power (24V system), so the kit can be upgraded to increase the power output by adding more solar panels, without the need to buy a new controller.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 200WMaximum power voltage: 20.2VMaximum power current: 9.9AOpen circuit voltage: 23.9VShort circuit current: 10.52APower allowance range: +/- 3%Dimensions: 111 x 99.2 x 4 cmWeight: 13.3 kg8 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable (6.0mm cross section)Male and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 20AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 10mm2Size: 15.9 x 8.1 x 4.8 cmWeight: 300 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty
This high efficiency 310W monocrystalline solar kit is perfect for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries. It can also be used for off-grid lighting applications and for back up power systems with batteries and inverters.This is one of the most powerful solar charging kits for vehicles, boats or off-grid power systems. It can generate up to 20A charging current when charging 12V battery, which means that a typical 100Ah battery will be charged from 0% to 100% in only 5 hours of bright sunlight.This 310W 12V/24V solar charging kit includes:High quality 310W monocrystalline solar panel, manufactured in Germany to the highest European quality and performance standards, with 2 x 1m of solar cable with MC4 connectors20A 12V/24V high efficiency MPPT solar charge controllerRemote LCD display with 5m cable (shows battery status and solar system performance)Set of 4 plastic corner mounting brackets for bonding to the roofSet of 4 plastic side mounting brackets for bonding to the roofWaterproof double entry cable gland2 x 5m of single core 4.0mm solar extension cable for the solar panel5m of 6.0mm twin core battery cable fitted with a 20A fuse, fuse holder and 8mm ring terminals 310W Monocrystalline solar panel:This solar panel features thick 4.0mm tempered solar glass, which makes it a lot stronger and more durable than other standard solar panels with 3.2mm glass. The robust waterproof design and strong aluminium frame of the solar panel are suitable for all weather conditions, including inland, marine applications and countries with hot or cold climates.The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to the 5m of 4mm solar extension cable supplied with this kit.20A MPPT solar charge controller:The high efficiency solar charge controller included in this kit uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers.The controller features a comprehensive set of electronic protection functions such as stopping reverse current at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, over voltage, over load, short circuit and reverse polarity protection.This controller also offers numerous possibilities for system personalisation. For instance, you can specify the duration and voltage of each charging stage, create a user-defined battery type with charging parameters specific to your battery, or personalise the load settings - e.g. set timers for lighting, fans, pumps. Other features include LED indicators and an audible fault alarm.The kit / controller comes with a remote LCD meter with 5m cable. This meter can display the state of charge of the battery and various charging parameters such as voltage and current. It can also record accumulated battery capacity and min / max values reached over time.Additional items:This kit also includes 5m positive and negative extension leads for connecting the solar panel to the solar charge controller, a 5m 6.0mm dual core battery cable with a 20A fuse, fuse holder and 8mm eyelets for use between the solar charge controller and your battery, a set of 4 corner and 4 side mounting brackets for fixing the solar panel to the roof using an appropriate sealant (not included) and a waterproof double cable entry gland for keeping the cable connection fully waterproof when mounting the panel outside and feeding the solar cables inside the vehicle / building / below deckSolar panel specifications:Peak power: 310WMaximum power voltage: 33.33VMaximum power current: 9.30AOpen circuit voltage: 41.0VShort circuit current: 9.94ADimensions: 165.5 x 99.5 x 4 cmWeight: 18 kgOperating temperature range: -40C to +85CMounting holes for installation2 x 1.0m of high quality single core solar cable 4.0mm cross sectionMale and female MC4 connectorsSpecial tempered solar glass 4.0mm thick Charge controller specifications:The most advanced MPPT technology to ensure high efficiency of your solar systemFully automated operation and auto 12/24V selection3 pairs of terminals (solar panel, battery, load) for wires up to 10mmMaximum solar panel voltage 150VTemperature sensor for automatic compensation (-3mV/C/2V)Comprehensive electronic protection featuresCommunication port: RS485/RJ45 interfaceGrounding: negative common groundCurrent limiting function (20A)Self-consumption: <60mA (12V), <30mA (24V)Working temperature: -35C to +55CEnclosure: IP30Size: 21.7 x 14.3 x 5.6 cmWeight: 1500 gRemote meter size (without frame): 10 x 10 x 3 cmRemote meter size (with frame): 12 x 12 x 5 cmRemote meter weight: 230 gMultiple mounting holes for ease of installation Mounting accessory specifications:Material: plasticColour: whiteCable diameter for the cable gland: 3-7mmSize: each corner bracket 15 x 15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cmCombined weight: 2.7kg Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The solar panel is covered by a 5 years workmanship warranty. The solar charge controller comes with a 2 year warranty.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.
This high efficiency, 275W polycrystalline solar kit is perfect for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries. It can also be used for off-grid lighting applications and for back up power systems with batteries and inverters.This is one of the most powerful solar charging kits for vehicles, boats or off-grid power systems. It can generate up to 20A charging current when charging 12V battery, which means that a typical 100Ah battery will be charged from 0% to 100% in only 5-6 hours of bright sunlight.This 275W 12V/24V solar charging kit includes:High quality 275W polycrystalline solar panel, manufactured in Germany to the highest European quality and performance standards, with 2 x 0.9m of solar cable with MC4 connectors20A 12V/24V high efficiency MPPT solar charge controllerRemote LCD display with 5m cable (shows battery status and solar system performance)Set of 4 corner plastic mounting brackets for bonding to the roofSet of 4 plastic side mounting brackets for bonding to the roofWaterproof double entry cable gland2 x 5m of single core 4.0mm solar extension cable for the solar panel5m of 6.0mm twin core battery cable with a 20A fuse, fuse holder and 8mm ring terminals 275W Polycrystalline solar panel: This solar panel features thick 4.0mm tempered solar glass, which makes it a lot stronger and more durable than other standard solar panels with standard 3.2mm glass. The robust waterproof design and strong aluminium frame ensure that the panel is suitable for all weather conditions, inland and marine applications and countries with hot or cold climates.The panel is fitted with 2 x 0.9m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to the 5m of 4mm solar extension cable supplied with this kit.20A MPPT solar charge controller:The high efficiency solar charge controller included in this kit uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers.The controller features a comprehensive set of electronic protection functions such as stopping reverse current at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, over voltage, over load, short circuit and reverse polarity protection.This controller also offers numerous possibilities for system personalisation. For instance, you can specify the duration and voltage of each charging stage, create a user-defined battery type with charging parameters specific to your battery, or personalise the load settings - e.g. set timers for lighting, fans, pumps. Other features include LED indicators and an audible fault alarm.The kit / controller comes with a remote LCD meter with 5m cable. This meter can display the state of charge of the battery and various charging parameters such as voltage and current. It can also record accumulated battery capacity and min / max values reached over time.Additional items:This kit also includes 5m positive and negative extension leads for connecting the solar panel to the solar charge controller, a 5m 6.0mm dual core battery cable with a 20A fuse, fuse holder and 8mm eyelets for use between the solar charge controller and your battery, a set of 4 corner and 4 side mounting brackets for fixing the solar panel to the roof using an appropriate sealant (not included) and a waterproof double cable entry gland for keeping the cable connection fully waterproof when mounting the panel outside and feeding the solar cables inside the vehicle / building / below deck.Solar panel specifications:Peak power: 275WMaximum power voltage: 31.36VMaximum power current: 8.77AOpen circuit voltage: 38.57VShort circuit current: 9.38ADimensions: 165.5 x 99.5 x 4 cmWeight: 17.9 kgOperating temperature range: -40C to +85CMounting holes for installationSpecial tempered solar glass 4.0mm thick2 x 0.9m of high quality single core solar cable 4.0mm cross sectionMale and female MC4 connectors Charge controller specifications:The most advanced MPPT technology to ensure high efficiency of your solar systemFully automated operation and auto 12/24V selection3 pairs of terminals (solar panel, battery, load) for wires up to 10mmMaximum solar panel voltage 150VTemperature sensor for automatic compensation (-3mV/C/2V)Comprehensive electronic protection featuresCommunication port: RS485/RJ45 interfaceGrounding: negative common groundCurrent limiting function (20A)Self-consumption: <60mA (12V), <30mA (24V)Working temperature: -35C to +55CEnclosure: IP30Size: 21.7 x 14.3 x 5.6 cmWeight: 1500 gRemote meter size (without frame): 10 x 10 x 3 cmRemote meter size (with frame): 12 x 12 x 5 cmRemote meter weight: 230 gMultiple mounting holes for ease of installation Mounting accessory specifications:Material: plasticColour: whiteCable diameter for the cable gland: 3-7mmSize: each corner bracket 15 x 15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cmCombined weight: 2.7g Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The solar panel is covered by a 5 year workmanship warranty.
320W solar panel:This high efficiency, waterproof 320W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to to other solar panels, your existing system or 6mm extension cable (the MC4 connectors can also be cut off when wiring to the screw terminals of the solar charge controller).The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.20A Solar charge controller:This kit includes a powerful 20A 12V/24V solar charge controller, which is designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 20A controller is the small size - only 16 x 8cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below).The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.
Solar panel specifications:
Peak power: 320W
Maximum power voltage: 18.35V
Maximum power current: 17.88A
Open circuit voltage: 21.85V
Short circuit current: 19.04A
Power allowance range: +/- 3%
Dimensions: 179 x 99 x 4 cm
Weight: 19.5 kg
8 mounting holes 9 x 14 mm
2 x 5m of high quality single core solar cable (6.0mm cross section)
Male and female MC4 connectors
we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.250W solar panel:This high efficiency, waterproof 250W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to to other solar panels, your existing system or 6mm extension cable (the MC4 connectors can also be cut off when wiring to the screw terminals of the solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.20A Solar charge controller:This kit includes a powerful 20A 12V/24V solar charge controller, which is designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 20A controller is the small size - only 16 x 8cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can handle up to 320W of solar power (12V system) or 640W of solar power (24V system), so the kit can be upgraded to increase the power output by adding more solar panels, without the need to buy a new controller.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 250WMaximum power voltage: 20.2VMaximum power current: 12.38AOpen circuit voltage: 23.9VShort circuit current: 13.12APower allowance range: +/- 3%Dimensions: 139 x 99 x 4 cmWeight: 15.3 kg8 mounting holes 9 x 14 mm2 x 5m of high quality single core solar cable (6.0mm cross section)Male and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 20AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 10mm2Size: 15.9 x 8.1 x 4.8 cmWeight: 300 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty
We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in these solar panels. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This kit includes:2 x 100W high efficiency waterproof monocrystalline solar panels, each with 5m cable and MC4 connectorsAdvanced 20A solar charge controller with LCD display and powerful 2.4A dual USB output 2 x 100W solar panels:This 200W system is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).Each panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panels can be used in all weather conditions.These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in smaller overall solar panels, which are ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Advanced 20A solar charge controller:The kit includes a 20A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc.The LCD display shows information regarding real time solar panel and battery performance, including: voltage, current, battery state of charge, and battery temperature. An energy statistics counter also displays the accumulated daily and monthly charge values (useful for comparing solar panel performance between different periods).This solar charge controller also offers the rare and highly sought-after feature of a dual USB charging output. These 5V USB ports have a total combined output of 2.4A, offering fast and powerful charging of USB compatible devices such as mobile phones, tablets, mp3 players etc.An optional programmable load (e.g. 12V lighting / fans / water pumps) may also be connected directly to the solar charge controller. Using the buttons and LCD display, the user can set personalised On/Off timers for these appliances. In addition, this controller also offers various charging programs for different battery types, which can be easily selected by the user. In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Specifications (per solar panel):Peak power: 100WMaximum power voltage: 20.2VMaximum power current: 4.95AOpen circuit voltage: 23.9VShort circuit current: 5.26APower allowance range: +/- 3%Dimensions: 845 x 670 x 30mmWeight: 7kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 4.0mm cross sectionMale and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Fully automated operation and auto 12/24V selectionRated charge/discharge current: 20AMaximum solar panel input power: 320W (12V) / 640W (24V)Maximum solar panel input voltage 50VTemperature sensor for automatic compensation: -3mV/C/2V (25C)Working temperature: -25ºC to +55ºCSelf-consumption: max. ≤9.2mA (12V); ≤11.7mA (24V)3 pairs of terminals (solar, battery, optional load)Terminals for wire up to 10mm2Multiple mounting holes for ease of installationSize: 16 x 9.5 x 5 cmWeight: 350 g Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty
we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in these solar panels. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This kit includes:2 x 100W high efficiency waterproof monocrystalline solar panels, each with 5m cable and MC4 connectors20A Photonic Universe solar charge controller 2 x 100W solar panels:This 200W system is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).Each panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panels can be used in all weather conditions.These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in smaller overall solar panels, which are ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.20A Solar charge controller:This kit includes a powerful 20A 12V/24V solar charge controller, which is designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 20A controller is the small size - only 16 x 8cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can handle up to 320W of solar power (12V system) or 640W of solar power (24V system), so the kit can be upgraded to increase the power output by adding more solar panels, without the need to buy a new controller.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Specifications (per solar panel):Peak power: 100WMaximum power voltage: 20.2VMaximum power current: 4.95AOpen circuit voltage: 23.9VShort circuit current: 5.26APower allowance range: +/- 3%Dimensions: 845 x 670 x 30mmWeight: 7kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 4.0mm cross sectionMale and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 20AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 10mm2Size: 15.9 x 8.1 x 4.8 cmWeight: 300 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty
we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.180W solar panel:This high efficiency, waterproof 180W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system or 6mm extension cable (the MC4 connectors can also be cut off when wiring to the screw terminals of the solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.20A Solar charge controller:This kit includes a powerful 20A 12V/24V solar charge controller, which is designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 20A controller is the small size - only 16 x 8cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can handle up to 320W of solar power (12V system) or 640W of solar power (24V system), so the kit can be upgraded to increase the power output by adding more solar panels, without the need to buy a new controller.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 180WMaximum power voltage: 20.2VMaximum power current: 8.91AOpen circuit voltage: 23.9VShort circuit current: 9.47APower allowance range: +/- 3%Dimensions: 147.5 x 67 x 3.5 cmWeight: 11.5 kg8 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable (4.0mm cross section)Male and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 20AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 10mm2Size: 15.9 x 8.1 x 4.8 cmWeight: 300 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty
...Read more
×
0 Kits Selected✕
×
Compare Kits
Van Solar Kits 175w - 350w
Why Choose Our Solar Panel Kits?
Efficiency: Our solar panels are engineered to capture maximum sunlight and convert it into electricity, ensuring optimal energy production.
Reliability: Built with durability in mind, our solar panels are constructed using top-tier materials, making them resistant to harsh weather conditions and ensuring a long lifespan.
Ease of Installation: Our kits come with easy-to-follow installation instructions, making it possible for anyone with basic DIY skills to set up the system.
Eco-Friendly: By switching to solar energy, you reduce your carbon footprint and contribute to a greener planet. Solar power is a sustainable and renewable energy source.
Energy Savings: Say goodbye to high electricity bills. Our solar panel kits will significantly reduce your energy costs, allowing you to save money in the long run.
Customizable: We offer a range of kits to suit your specific energy needs and budget. Our expert team can assist you in choosing the right kit for your requirements.