USB A & USB C Chargers for Campervans
The ever-popular PowerVerter PVPro Range of USB chargers has now been updated to include USB-C options, expanding on the great design concepts of USB charging on vehicles. Models are now available offering combined Dual USB-A & C and Single USB-C output versions.
36 Products Found
£26.33
Alfatronix PVPro-AC USB A & C Charger - Rear Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 3.6A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB A Socket & 1 x USB C Socket
Output indicator: Blue LED output indication
Mounting method: Rear Fit version; 30mm diameter hole, secured with rear nut
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
View Product
£26.33
Alfatronix PVPro-AA Double USB A Charger - Rear Fit
Input voltage range: 9-3Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 3A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 2 x USB A Socket
Output indicator: Blue LED output indication
Mounting method: Rear Fit version; 30mm diameter hole, secured with rear nut
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
View Product
£27.84
Alfatronix PVPro-ACFF USB A & C Charger - Front Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 3.6A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB A Socket & 1 x USB C Socket
Output indicator: Blue LED output indication
Mounting method: Front Fit version; 30mm diameter hole, secured with hidden screws
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
View Product
£30.50
Alfatronix Powerverter Double USB Power Outlet - Front Fit - 2 x 1.5A
Input voltage range: 9-32Vdc
Output voltage: 5Vdc +/- 0.2V
Output Power: Double output 3A (2 x 1.5A)
Ingress Protection: IP30
Dimensions: Ø47 x 33mm (Mounting Hole Ø30mm)
Fitting: Front Fit Version
Weight: 20g
The Safe Alternative For On Board Power
The widespread use of smartphones and computer tablets has created an increasing need for user accessible, on the move charging systems. The PowerVerter USB Chargers can be easily installed onto any vessel and allow both crew and passengers to readily access power to charge any device connected via a USB lead. This type of system has the distinct advantage of largely negating the need for mains electricity. The 5Volt DC power is much safer than mains, so installation is quick and simple. The charging facility can be accessed directly and power their own USB charging lead. All versions in the range can be connected directly to both 12Vdc and 24Vdc systems without adjustment. The advanced electronic design will also automatically detect if the device is an Apple or Android configuration and alter the charging process accordingly. This ensures that whatever device is connected, be it Apple, Android, iPad, phone or tablet, it will always be charged as fully as time and capacity allow.
The Range
The PowerVerter USB range has been completely re-designed to include a standard design that can be used in regular as well as slim-line installations. Aesthetically the design has been improved with a dark grey body and contrasting light grey ring as well as an attractive and more obvious LED indicator. This helps to draw attention to the unit and encourages use.
Electronically, the design now includes automatic short circuit detection, so in the event of tampering or compromise, the unit will automatically shut down, then re-start again once the fault has been removed. A charger only version is also available for permanent, behind the scenes installations without customer interface. The range is completed with our ‘Pod’. This is ideal for retrofit installations and is designed to fit underneath the seat in front. This system can also be bought as a complete assembly including; PVPro USB charger, pod and 1.2m of fused cable.
Commercial Installations
The Powerverter USB chargers are manufactured using rugged components to provide years of service in demanding commercial environments. Due to the limitations of public use, the guarantee on these products is limited to three years.
The PowerVerter USB chargers offer an advanced design that effectively counteracts the voltage drop common when output currents vary as different devices charge at different rates. This avoids the common problem of the phone or tablet indicating it is charging when in fact very little current is being supplied. They also have an exceptionally low quiescent current of less that 2mA meaning that multiple devices can safely be installed throughout buses and coaches without materially discharging the battery.
They have been designed to meet the rigorous standards required for on board commercial vehicle applications including BS EN50498 and ISO 7637-2 and are both CE and E marked. The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum reliability. All versions have a subtle blue LED light to highlight their location on the vessel.
...Read more
View Product
£27.84
Alfatronix PVPro-AAFF Double USB A Charger - Front Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 3A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 2 x USB A Socket
Output indicator: Blue LED output indication
Mounting method: Frong Fit version; 30mm diameter hole, secured with hidden screws
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
View Product
Out of Stock
£25.68
Alfatronix PVPWP-CFF Slimline IP65 USB C Charger - Front Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 2.5A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB C Socket
Output indicator: Blue LED output indication
Mounting method: Front Fit version; 30mm diameter hole, secured with hidden screws
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£23.35
Alfatronix Powerverter Single USB Power Outlet - Hidden - 2.1A
Input voltage range: 9-32Vdc
Output voltage: 5Vdc +/- 0.2V
Output Power: Single 2.1A
Ingress Protection: IP30
Dimensions: 115 x 24 x 15mm
Fitting: Hidden Version for use behind dash / control panels
Weight: 17g
The Safe Alternative For On Board Power
The widespread use of smartphones and computer tablets has created an increasing need for user accessible, on the move charging systems. The PowerVerter USB Chargers can be easily installed onto any vessel and allow both crew and passengers to readily access power to charge any device connected via a USB lead. This type of system has the distinct advantage of largely negating the need for mains electricity. The 5Volt DC power is much safer than mains, so installation is quick and simple. The charging facility can be accessed directly and power their own USB charging lead. All versions in the range can be connected directly to both 12Vdc and 24Vdc systems without adjustment. The advanced electronic design will also automatically detect if the device is an Apple or Android configuration and alter the charging process accordingly. This ensures that whatever device is connected, be it Apple, Android, iPad, phone or tablet, it will always be charged as fully as time and capacity allow.
The Range
The PowerVerter USB range has been completely re-designed to include a standard design that can be used in regular as well as slim-line installations. Aesthetically the design has been improved with a dark grey body and contrasting light grey ring as well as an attractive and more obvious LED indicator. This helps to draw attention to the unit and encourages use.
Electronically, the design now includes automatic short circuit detection, so in the event of tampering or compromise, the unit will automatically shut down, then re-start again once the fault has been removed. A charger only version is also available for permanent, behind the scenes installations without customer interface. The range is completed with our ‘Pod’. This is ideal for retrofit installations and is designed to fit underneath the seat in front. This system can also be bought as a complete assembly including; PVPro USB charger, pod and 1.2m of fused cable.
Commercial Installations
The Powerverter USB chargers are manufactured using rugged components to provide years of service in demanding commercial environments. Due to the limitations of public use, the guarantee on these products is limited to three years.
The PowerVerter USB chargers offer an advanced design that effectively counteracts the voltage drop common when output currents vary as different devices charge at different rates. This avoids the common problem of the phone or tablet indicating it is charging when in fact very little current is being supplied. They also have an exceptionally low quiescent current of less that 2mA meaning that multiple devices can safely be installed throughout buses and coaches without materially discharging the battery.
They have been designed to meet the rigorous standards required for on board commercial vehicle applications including BS EN50498 and ISO 7637-2 and are both CE and E marked. The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum reliability. All versions have a subtle blue LED light to highlight their location on the vessel.
...Read more
Out of Stock
£28.85
Alfatronix Powerverter Double USB Power Outlet - Rear Fit - 2 x 1.5A
Input voltage range: 9-32Vdc
Output voltage: 5Vdc +/- 0.2V
Output Power: Double output 3A (2 x 1.5A)
Ingress Protection: IP30
Dimensions: Ø37 x 33mm (Mounting Hole Ø30mm)
Fitting: Rear Fit Version
Weight: 24g
The Safe Alternative For On Board Power
The widespread use of smartphones and computer tablets has created an increasing need for user accessible, on the move charging systems. The PowerVerter USB Chargers can be easily installed onto any vessel and allow both crew and passengers to readily access power to charge any device connected via a USB lead. This type of system has the distinct advantage of largely negating the need for mains electricity. The 5Volt DC power is much safer than mains, so installation is quick and simple. The charging facility can be accessed directly and power their own USB charging lead. All versions in the range can be connected directly to both 12Vdc and 24Vdc systems without adjustment. The advanced electronic design will also automatically detect if the device is an Apple or Android configuration and alter the charging process accordingly. This ensures that whatever device is connected, be it Apple, Android, iPad, phone or tablet, it will always be charged as fully as time and capacity allow.
The Range
The PowerVerter USB range has been completely re-designed to include a standard design that can be used in regular as well as slim-line installations. Aesthetically the design has been improved with a dark grey body and contrasting light grey ring as well as an attractive and more obvious LED indicator. This helps to draw attention to the unit and encourages use.
Electronically, the design now includes automatic short circuit detection, so in the event of tampering or compromise, the unit will automatically shut down, then re-start again once the fault has been removed. A charger only version is also available for permanent, behind the scenes installations without customer interface. The range is completed with our ‘Pod’. This is ideal for retrofit installations and is designed to fit underneath the seat in front. This system can also be bought as a complete assembly including; PVPro USB charger, pod and 1.2m of fused cable.
Commercial Installations
The Powerverter USB chargers are manufactured using rugged components to provide years of service in demanding commercial environments. Due to the limitations of public use, the guarantee on these products is limited to three years.
The PowerVerter USB chargers offer an advanced design that effectively counteracts the voltage drop common when output currents vary as different devices charge at different rates. This avoids the common problem of the phone or tablet indicating it is charging when in fact very little current is being supplied. They also have an exceptionally low quiescent current of less that 2mA meaning that multiple devices can safely be installed throughout buses and coaches without materially discharging the battery.
They have been designed to meet the rigorous standards required for on board commercial vehicle applications including BS EN50498 and ISO 7637-2 and are both CE and E marked. The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum reliability. All versions have a subtle blue LED light to highlight their location on the vessel.
...Read more
£21.34
Alfatronix PVPro-A Single USB A Charger - Rear Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 2.1A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB A Socket
Output indicator: Blue LED output indication
Mounting method: Rear Fit version; 30mm diameter hole, secured with rear nut
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
View Product
£42.58
Alfatronix IP65 Powerverter Double USB Outlet - Front Fit - 2 x 1.5A
Input voltage range: 9-32Vdc
Output voltage: 5Vdc +/- 0.2V
Output Power: Double 3A (2 x 1.5A)
Ingress Protection: IP65
Dimensions: Ø47 x 33mm (Mounting Hole Ø30mm)
Fitting: Front Fit Version
Weight: 28g
USB Power with Added Liquid & Dust Ingress Protection
The PVPWp range of USB chargers offers all the performance benefits of the PVPro range with additional protection provided to the electronic circuit of the unit. A durable polyurethane compound encompasses the electronic components offering comprehensive protection against dust and liquid ingress to IP65.
This product offers a good solution where tampering might be an issue or in dirty or more challenging environments. Although the nature of the USB connector itself can always be wilfully broken or damaged and will still corrode if repeatedly exposed to liquid ingress, all electronics in these units is protected to IP65.
The Range
The range mirrors the very successful PVPro products, offering both single and double outputs and rear fit as well as front fitting options which allow the unit to be replaced quickly and easily should this be required. Automatic short circuit protection is also included, so in the event of tampering or compromise, the unit will automatically shut down, then re-start once the fault has been removed. All units can be installed on both 12Vdc or 24Vdc vessels without adjustment.
Units can be installed directly into bulkheads, vehicle walls, into seat fittings and underneath seats using the mounting pod. They can also be fitted onto table tops using the horizontal surface mounting pod.
Approvals and Manufacture
The range has been designed to meet the rigorous standards required for on board commercial vehicle applications including EN50498, ISO7637-2, and is both CE and E marked (Reg10). The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum durability.
Warranty
The PVPWp range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
View Product
Out of Stock
£10.18
Alfatronix PV-USB-H1 Wiring Loom with Inline 2A Fuse for USB Sockets
Wiring loom for PV65R Chargers The range mirrors the very successful PVProproducts, offering both single and double outputs and rear fit as well as front fitting options which allow the unit to be replaced quickly and easily should this be required. Automatic short circuit protection is also included, so in the event of tampering or compromise, the unit will automatically shut down, then restart once the< fault has been removed. All units can be installed on both 12Vdc or 24Vdc vehicles without adjustment. Units can be installed directly into bulkheads, vehicle walls, into seat fittings and underneath seats using the mounting pod P/N USB-POD. They can also be fitted onto table tops using the horizontal surface mounting pod P/N USB-TPOD.
...Read more
Out of Stock
£8.42
Alfatronix USB-TPOD Table mounting pod for USB Chargers
For Use with Alfatronix USB Charging Sockets
Fits 2 USB Charger Sockets (Not Included)
Height: 44.5mm
Width: 103mm
Depth: 88.1mm
Designed to house two Alfatronix PVPro chargers. It comes complete with fused internal wiring to allow for a single input source from the vehicle wiring. Using this system up to four USB outlets (2 x double units) can be made available for charging at tables.
...Read more
Out of Stock
£6.74
Alfatronix USB-POD Universal mounting pod for USB Chargers
For Use with Alfatronix USB Charging Sockets
Fits 1 USB Charger Socket (Not Included)
Height: 52.8mm
Width: 61.7mm
Depth: 79.3mm
Rugged mounting pod for PVPro USB installation under seats, accessible from the front or rear. It can house an Alfatronix USB charger and is also available as a complete assembly together with 1.2m of fused wiring.
...Read more
Out of Stock
£33.89
Alfatronix PVPWP-ACFF IP65 Slimline USB A & C Charger - Front Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 3.6A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB A Socket & 1 x USB C Socket
Output indicator: Blue LED output indication
Mounting method: FrontFit version; 30mm diameter hole, secured with hidden screws
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£32.38
Alfatronix PVPWP-AC IP65 Slimline USB A & C Charger - Rear Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 3.6A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB A Socket & 1 x USB C Socket
Output indicator: Blue LED output indication
Mounting method: Rear Fit version; 30mm diameter hole, secured with rear nut
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£38.86
Alfatronix PV65R-ACFF IP65 USB A & C Charger - Front Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 3.6A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB A Socket & 1 x USB C Socket
Output indicator: Blue LED output indication
Mounting method: Front Fit version; 30mm diameter hole, secured with hidden screws
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£37.34
Alfatronix PV65R-AC IP65 USB A & C Charger - Rear Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 3.6A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB A Socket & 1 x USB C Socket
Output indicator: Blue LED output indication
Mounting method: Rear Fit version; 30mm diameter hole, secured with rear nut
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£24.24
Alfatronix PVPWP-C IP65 Slimline USB C Charger - Rear Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 2.5A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB C Socket
Output indicator: Blue LED output indication
Mounting method: Rear Fit version; 30mm diameter hole, secured with rear nut
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£29.45
Alfatronix PV65R-CFF IP65 Single USB C Charger - Front Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 2.5A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB C Socket
Output indicator: Blue LED output indication
Mounting method: Front Fit version; 30mm diameter hole, secured with hidden screws
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£27.94
Alfatronix PV65R-C IP65 Single USB C Charger - Rear Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 2.5A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB C Socket
Output indicator: Blue LED output indication
Mounting method: Rear Fit version; 30mm diameter hole, secured with rear nut
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£33.89
Alfatronix PVPWP-AAFF Slimline IP65 Double USB A Charger - Front Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 3A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 2 x USB A Socket
Output indicator: Blue LED output indication
Mounting method: Front Fit version; 30mm diameter hole, secured with hidden screws
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£32.38
Alfatronix PVPWP-AA Slimline IP65 Double USB A Charger - Rear Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 3A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 2 x USB A Socket
Output indicator: Blue LED output indication
Mounting method: Rear Fit version; 30mm diameter hole, secured with rear nut
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£38.86
Alfatronix PV65R-AAFF IP65 Double USB A Charger - Front Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 2.1A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB A Socket
Output indicator: Blue LED output indication
Mounting method: Rear Fit version; 30mm diameter hole, secured with rear nut
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£37.34
Alfatronix PV65R-AA IP65 Double USB A Charger - Rear Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 3A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 2 x USB A Socket
Output indicator: Blue LED output indication
Mounting method: Rear Fit version; 30mm diameter hole, secured with rear nut
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
£25.68
Alfatronix PVPWP-AFF Slimline IP65 Single USB A Charger - Front Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 2.1A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB A Socket
Output indicator: Blue LED output indication
Mounting method: Rear Fit version; 30mm diameter hole, secured with rear nut
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
View Product
Out of Stock
£24.24
Alfatronix PVPWP-A Slimline IP65 Single USB A Charger - Rear Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 2.1A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB A Socket
Output indicator: Blue LED output indication
Mounting method: Rear Fit version; 30mm diameter hole, secured with rear nut
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£29.45
Alfatronix PV65R-AFF IP65 Single USB A Charger - Front Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 2.1A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB A Socket
Output indicator: Blue LED output indication
Mounting method: Rear Fit version; 30mm diameter hole, secured with rear nut
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£27.94
Alfatronix PV65R-A IP65 Single USB A Charger - Rear Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 2.1A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB A Socket
Output indicator: Blue LED output indication
Mounting method: Rear Fit version; 30mm diameter hole, secured with rear nut
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£23.93
Alfatronix PVPro-CFF Single USB C Charger - Front Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 2.5A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB C Socket
Output indicator: Blue LED output indication
Mounting method: Front Fit version; 30mm diameter hole, secured with hidden screws
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£21.34
Alfatronix PVPro-C Single USB C Charger - Rear Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 2.5A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB C Socket
Output indicator: Blue LED output indication
Mounting method: Rear Fit version; 30mm diameter hole, secured with rear nut
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£23.93
Alfatronix PVPro-AFF Single USB A Charger - Front Fit
Input voltage range: 9-32Vdc
Output voltage: 5.2Vdc +/- 0.2V
Max Output Power: 2.1A
Off load current (quiescent current): <2.5mA
Power conversion efficiency: 90%
Operating temperature: -25°C to +55°C
Connections Input: 6.3mm push-in flat blade connectors
Output: 1 x USB A Socket
Output indicator: Blue LED output indication
Mounting method: Front Fit version; 30mm diameter hole, secured with hidden front screws
IP Rating: IP30
A & C Port USB Charging For 12V And 24VDC Applications
The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version.
As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
The Range
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed.
Warranty
The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£28.87
Alfatronix IP65 Powerverter Single USB Outlet - Rear Fit - 2.1A
Input voltage range: 9-32Vdc
Output voltage: 5Vdc +/- 0.2V
Output Power: Single 2.1A
Ingress Protection: IP65
Dimensions: Ø37 x 49mm (Mounting Hole Ø30mm)
Fitting: Rear Fit Version
Weight: 21g
USB Power with Added Liquid & Dust Ingress Protection
The PVPWp range of USB chargers offers all the performance benefits of the PVPro range with additional protection provided to the electronic circuit of the unit. A durable polyurethane compound encompasses the electronic components offering comprehensive protection against dust and liquid ingress to IP65.
This product offers a good solution where tampering might be an issue or in dirty or more challenging environments. Although the nature of the USB connector itself can always be wilfully broken or damaged and will still corrode if repeatedly exposed to liquid ingress, all electronics in these units is protected to IP65.
The Range
The range mirrors the very successful PVPro products, offering both single and double outputs and rear fit as well as front fitting options which allow the unit to be replaced quickly and easily should this be required. Automatic short circuit protection is also included, so in the event of tampering or compromise, the unit will automatically shut down, then re-start once the fault has been removed. All units can be installed on both 12Vdc or 24Vdc vessels without adjustment.
Units can be installed directly into bulkheads, vehicle walls, into seat fittings and underneath seats using the mounting pod. They can also be fitted onto table tops using the horizontal surface mounting pod.
Approvals and Manufacture
The range has been designed to meet the rigorous standards required for on board commercial vehicle applications including EN50498, ISO7637-2, and is both CE and E marked (Reg10). The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum durability.
Warranty
The PVPWp range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£29.09
Alfatronix IP65 Powerverter Single USB Outlet - Front Fit - 2.1A
Input voltage range: 9-32Vdc
Output voltage: 5Vdc +/- 0.2V
Output Power: Single 2.1A
Ingress Protection: IP65
Dimensions: Ø47 x 33mm (Mounting Hole Ø30mm)
Fitting: Front Fit Version
Weight: 24g
USB Power with Added Liquid & Dust Ingress Protection
The PVPWp range of USB chargers offers all the performance benefits of the PVPro range with additional protection provided to the electronic circuit of the unit. A durable polyurethane compound encompasses the electronic components offering comprehensive protection against dust and liquid ingress to IP65.
This product offers a good solution where tampering might be an issue or in dirty or more challenging environments. Although the nature of the USB connector itself can always be wilfully broken or damaged and will still corrode if repeatedly exposed to liquid ingress, all electronics in these units is protected to IP65.
The Range
The range mirrors the very successful PVPro products, offering both single and double outputs and rear fit as well as front fitting options which allow the unit to be replaced quickly and easily should this be required. Automatic short circuit protection is also included, so in the event of tampering or compromise, the unit will automatically shut down, then re-start once the fault has been removed. All units can be installed on both 12Vdc or 24Vdc vessels without adjustment.
Units can be installed directly into bulkheads, vehicle walls, into seat fittings and underneath seats using the mounting pod. They can also be fitted onto table tops using the horizontal surface mounting pod.
Approvals and Manufacture
The range has been designed to meet the rigorous standards required for on board commercial vehicle applications including EN50498, ISO7637-2, and is both CE and E marked (Reg10). The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum durability.
Warranty
The PVPWp range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£38.59
Alfatronix IP65 Powerverter Double USB Outlet - Rear Fit - 2 x 1.5A
Input voltage range: 9-32Vdc
Output voltage: 5Vdc +/- 0.2V
Output Power: Double 3A (2 x 1.5A)
Ingress Protection: IP65
Dimensions: Ø37 x 49mm (Mounting Hole Ø30mm)
Fitting: Rear Fit Version
Weight: 25g
USB Power with Added Liquid & Dust Ingress Protection
The PVPWp range of USB chargers offers all the performance benefits of the PVPro range with additional protection provided to the electronic circuit of the unit. A durable polyurethane compound encompasses the electronic components offering comprehensive protection against dust and liquid ingress to IP65.
This product offers a good solution where tampering might be an issue or in dirty or more challenging environments. Although the nature of the USB connector itself can always be wilfully broken or damaged and will still corrode if repeatedly exposed to liquid ingress, all electronics in these units is protected to IP65.
The Range
The range mirrors the very successful PVPro products, offering both single and double outputs and rear fit as well as front fitting options which allow the unit to be replaced quickly and easily should this be required. Automatic short circuit protection is also included, so in the event of tampering or compromise, the unit will automatically shut down, then re-start once the fault has been removed. All units can be installed on both 12Vdc or 24Vdc vessels without adjustment.
Units can be installed directly into bulkheads, vehicle walls, into seat fittings and underneath seats using the mounting pod. They can also be fitted onto table tops using the horizontal surface mounting pod.
Approvals and Manufacture
The range has been designed to meet the rigorous standards required for on board commercial vehicle applications including EN50498, ISO7637-2, and is both CE and E marked (Reg10). The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum durability.
Warranty
The PVPWp range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.
...Read more
Out of Stock
£23.59
Alfatronix Powerverter Single USB Power Outlet - Front Fit - 2.1A
Input voltage range: 9-32Vdc
Output voltage: 5Vdc +/- 0.2V
Output Power: Single 2.1A
Ingress Protection: IP30
Dimensions: Ø47 x 33mm (Mounting Hole Ø30mm)
Fitting: Front Fit Version
Weight: 23g
The Safe Alternative For On Board Power
The widespread use of smartphones and computer tablets has created an increasing need for user accessible, on the move charging systems. The PowerVerter USB Chargers can be easily installed onto any vessel and allow both crew and passengers to readily access power to charge any device connected via a USB lead. This type of system has the distinct advantage of largely negating the need for mains electricity. The 5Volt DC power is much safer than mains, so installation is quick and simple. The charging facility can be accessed directly and power their own USB charging lead. All versions in the range can be connected directly to both 12Vdc and 24Vdc systems without adjustment. The advanced electronic design will also automatically detect if the device is an Apple or Android configuration and alter the charging process accordingly. This ensures that whatever device is connected, be it Apple, Android, iPad, phone or tablet, it will always be charged as fully as time and capacity allow.
The Range
The PowerVerter USB range has been completely re-designed to include a standard design that can be used in regular as well as slim-line installations. Aesthetically the design has been improved with a dark grey body and contrasting light grey ring as well as an attractive and more obvious LED indicator. This helps to draw attention to the unit and encourages use.
Electronically, the design now includes automatic short circuit detection, so in the event of tampering or compromise, the unit will automatically shut down, then re-start again once the fault has been removed. A charger only version is also available for permanent, behind the scenes installations without customer interface. The range is completed with our ‘Pod’. This is ideal for retrofit installations and is designed to fit underneath the seat in front. This system can also be bought as a complete assembly including; PVPro USB charger, pod and 1.2m of fused cable.
Commercial Installations
The Powerverter USB chargers are manufactured using rugged components to provide years of service in demanding commercial environments. Due to the limitations of public use, the guarantee on these products is limited to three years.
The PowerVerter USB chargers offer an advanced design that effectively counteracts the voltage drop common when output currents vary as different devices charge at different rates. This avoids the common problem of the phone or tablet indicating it is charging when in fact very little current is being supplied. They also have an exceptionally low quiescent current of less that 2mA meaning that multiple devices can safely be installed throughout buses and coaches without materially discharging the battery.
They have been designed to meet the rigorous standards required for on board commercial vehicle applications including BS EN50498 and ISO 7637-2 and are both CE and E marked. The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum reliability. All versions have a subtle blue LED light to highlight their location on the vessel.
...Read more
Out of Stock
£22.03
Alfatronix Powerverter Single USB Power Outlet - Rear Fit - 2.1A
Input voltage range: 9-32Vdc
Output voltage: 5Vdc +/- 0.2V
Output Power: Single 2.1A
Ingress Protection: IP30
Dimensions: Ø37 x 33mm (Mounting Hole Ø30mm)
Fitting: Rear Fit Version
Weight: 20g
The Safe Alternative For On Board Power
The widespread use of smartphones and computer tablets has created an increasing need for user accessible, on the move charging systems. The PowerVerter USB Chargers can be easily installed onto any vessel and allow both crew and passengers to readily access power to charge any device connected via a USB lead. This type of system has the distinct advantage of largely negating the need for mains electricity. The 5Volt DC power is much safer than mains, so installation is quick and simple. The charging facility can be accessed directly and power their own USB charging lead. All versions in the range can be connected directly to both 12Vdc and 24Vdc systems without adjustment. The advanced electronic design will also automatically detect if the device is an Apple or Android configuration and alter the charging process accordingly. This ensures that whatever device is connected, be it Apple, Android, iPad, phone or tablet, it will always be charged as fully as time and capacity allow.
The Range
The PowerVerter USB range has been completely re-designed to include a standard design that can be used in regular as well as slim-line installations. Aesthetically the design has been improved with a dark grey body and contrasting light grey ring as well as an attractive and more obvious LED indicator. This helps to draw attention to the unit and encourages use.
Electronically, the design now includes automatic short circuit detection, so in the event of tampering or compromise, the unit will automatically shut down, then re-start again once the fault has been removed. A charger only version is also available for permanent, behind the scenes installations without customer interface. The range is completed with our ‘Pod’. This is ideal for retrofit installations and is designed to fit underneath the seat in front. This system can also be bought as a complete assembly including; PVPro USB charger, pod and 1.2m of fused cable.
Commercial Installations
The Powerverter USB chargers are manufactured using rugged components to provide years of service in demanding commercial environments. Due to the limitations of public use, the guarantee on these products is limited to three years.
The PowerVerter USB chargers offer an advanced design that effectively counteracts the voltage drop common when output currents vary as different devices charge at different rates. This avoids the common problem of the phone or tablet indicating it is charging when in fact very little current is being supplied. They also have an exceptionally low quiescent current of less that 2mA meaning that multiple devices can safely be installed throughout buses and coaches without materially discharging the battery.
They have been designed to meet the rigorous standards required for on board commercial vehicle applications including BS EN50498 and ISO 7637-2 and are both CE and E marked. The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum reliability. All versions have a subtle blue LED light to highlight their location on the vessel.
...Read more
0 Kits Selected✕
As well as standard (rear fit), all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required.
Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments such as for installation into vehicle walls.
Recommended Full Kits
Loading...
£2,798.31
£3,231.11
£2,798.31
£3,448.11
£3,231.11
Loading...
£3,559.58
£3,508.58
£2,798.31
£3,231.11
Loading...
£3,960.58
£3,610.58
£3,610.58
£3,460.58
£3,610.58
£3,448.11
£3,460.58
Loading...
£1,287.58
£1,019.18
£1,543.99
£2,086.26
£2,408.61
£2,036.61
£1,287.58
£1,019.18
£1,543.99
£2,086.26