Phoenix Inverters
The Victron Phoenix Inverter range delivers pure sine wave power, ensuring seamless operation for sensitive electronics and high-demand applications. Whether you're off-grid, on the road, or need reliable backup power, these inverters provide high efficiency, smart monitoring, and a robust design to handle any environment. Power your world with confidence—choose Victron Phoenix.
22 Products Found
£25.99
Victron Energy Phoenix Inverter Control VE.Direct - REC040010210R
Remote On/Off switch panel for Victron's range of Phoenix VE.Direct inverters and newer Phoenix Smart inverters. A blue LED serves as a visual indicator that the inverter is powered.
Supplied with a metal bracket and screws for a discrete, flush-mounted installation and no visible fixings.
Installation is simple, requiring just a 2-core connection between the remote panel and the inverter remote control terminals.
Features
On/Off rocker switch
Blue LED to indicate inverter is ON
5-year manufacturer's warranty
...Read more
View Product
£59.00
Victron Energy Interface MK3-USB (VE.Bus to USB) – ASS030140000
The MK3-USB allows the following products to connect to a computer for configuration and firmware updates:
Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.
...Read more
View Product
£72.00
Victron Energy VE.Bus Smart Dongle – ASS030537010
The VE.Bus Smart dongle is two products in one:
First of all it is the bluetooth accessory for our range of inverter/chargers: Multis, MultiPlusses, MultiPlus-II, MultiGrid, MultiGrid-II, Quattros, and our series of Phoenix Inverters with a VE.Bus port. When installed, use the VictronConnect app to monitor operation and also operate the system: change the input current limit as well as switch between Off, On and Charger-only modes.
Secondly it can work as a Voltage- and Temperature-sense device for the inverter/charger. This works with all models, and is especially useful in combination with the MultiPlus-II, as it does not have on-board terminals for Voltage- and Temperature sense wiring
For monitoring, the device is a great alternative in caravans, smaller yachts and motor homes for which the Color Control GX or Venus GX are a step too far.
...Read more
View Product
£79.99
Victron Energy Phoenix Inverter 12/250 230V VE.Direct UK – PIN121251400
Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.
Features
VE.Direct communication port
The VE.Direct port can be connected to:
A computer (VE.Direct to USB interface cable needed)
Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
Fully configurable:
Low battery voltage alarm trip and reset levels
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage 210 – 245V
Frequency 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level
Monitoring:
In- and output voltage, % load and alarms
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
DC connection with screw terminals
No special tools needed for installation.
Brand
Victron Energy
Manufacturer Part Number
PIN121251400
gtin
8719076055006
Voltage
12V
Cont. Output Power at 25°C
250VA
Peak Power
400W
Output AC Voltage
230V
Efficiency
87%
Protection Category
IP21
Dimensions
H86 x W165 x D260mm
Weight
2.4Kg
Warranty
5 Years
Bluetooth Enabled
No
Plug Type
UK
Plug Type
UK
Max Efficiency
90%
Continuous Output Power at 25°C
250va
...Read more
View Product
£126.49
Victron Energy Phoenix Inverter 12V 375VA VE.Direct UK – PIN121371400
Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.
Features
VE.Direct communication port
The VE.Direct port can be connected to:
A computer (VE.Direct to USB interface cable needed)
Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
Fully configurable:
Low battery voltage alarm trip and reset levels
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage 210 – 245V
Frequency 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level
Monitoring:
In- and output voltage, % load and alarms
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
DC connection with screw terminals
No special tools needed for installation.
Brand
Victron Energy
Manufacturer Part Number
PIN123750400
GTIN
8719076034001
Voltage
12V
Cont. Output Power at 25°C
375VA
Peak Power
700W
Output AC Voltage
230V
Protection Category
IP21
Efficiency
89%
Bluetooth Enabled
No
Plug Type
UK
Dimensions
H86 x W165 x D260mm
Weight
3Kg
Warranty
5 Years
...Read more
View Product
£139.99
Victron Energy Phoenix Inverter 12/500 VE.Direct UK – PIN121501400
Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.
Features
VE.Direct communication port
The VE.Direct port can be connected to:
A computer (VE.Direct to USB interface cable needed)
Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
Fully configurable:
Low battery voltage alarm trip and reset levels
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage 210 – 245V
Frequency 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level
Monitoring:
In- and output voltage, % load and alarms
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
DC connection with screw terminals
No special tools needed for installation.
Plug Type
UK
Max Efficiency
90%
Continuous Output Power at 25°C
500VA
...Read more
View Product
£199.00
Victron Energy Phoenix Inverter 12V 800VA VE.Direct UK – PIN121801400
Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.
Features
VE.Direct communication port
The VE.Direct port can be connected to:
A computer (VE.Direct to USB interface cable needed)
Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
Fully configurable:
Low battery voltage alarm trip and reset levels
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage 210 – 245V
Frequency 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level
Monitoring:
In- and output voltage, % load and alarms
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
DC connection with screw terminals
No special tools needed for installation.
Brand
Victron Energy
Manufacturer Part Number
PIN121801400
GTIN
8719076038405
Voltage
12V
Cont. Output Power at 25°C
800VA
Peak Power
1500W
Output AC Voltage
230V
Protection Category
IP21
Efficiency
90%
Bluetooth Enabled
No
Plug Type
UK
Dimensions
H105 x W216 x D305mm
Weight
5.5Kg
Warranty
5 Years
...Read more
View Product
£299.00
Victron Energy Phoenix Inverter 12/1200 230V VE.Direct UK PIN122121410
Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.
The VE.Direct port can be connected to:
A computer (VE.Direct to USB interface cable needed)
Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
Fully configurable:
Low battery voltage alarm trip and reset levels
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage 210 – 245V
Frequency 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level
Monitoring:
In- and output voltage, % load and alarms
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
DC connection with screw terminals
No special tools needed for installation.
Power lead not included in the box
Brand:
Victron Energy PIN122121410
Remote on-off:
Yes
Cont. output power at 25°C (VA):
1200
Peak power (W):
2200
Maximum efficiency (%):
91
Battery-connection:
Screw terminals
Weight kg:
7.4
Dimensions:
H117x 232 x 362mm
Input voltage range:
9,2 - 17V
Protection:
a - f
Output Voltage:
230VAC or 120VAC +/- 3%
Warranty:
5 Years
Zero load consumption:
7W
...Read more
View Product
£309.00
Victron Phoenix Inverter 24/1200 230V VE.Direct UK PIN242121400
Victron Phoenix Inverter 24/1200 230V VE.Direct UK (PIN242121400)
Victron Energy Phoenix Inverter 24/1200 230V VE.Direct UK Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC.
VE.Direct communication port
The VE.Direct port can be connected to:
– A computer (VE.Direct to USB interface cable needed)– Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
Fully configurable
– Low battery voltage alarm trip and reset levels– Low battery voltage cut-off and restart levels– Dynamic cut-off: load dependent cut-off level– Output voltage 210 – 245V– Frequency 50 Hz or 60 Hz– ECO mode on/off and ECO mode sense level
Monitoring
– In- and output voltage, % load and alarms
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
LED diagnosis
Please see manual for a description. To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.
WEIGHT
7.4 kg
DIMENSIONS
117 × 232 × 327 mm
BRAND
Victron Energy
COLOUR
Blue
COUNTRY OF ORIGIN
China
GLOBAL IDENTIFIER (GTIN CODE)
8719076041399
INTRASTAT STATISTICAL CODE
85044084
MANUFACTURER
Victron Energy
QUANTITY PER MASTERBOX
4
QUANTITY PER PALLET
36
USA STATISTICAL CODE
8504.40.95-70
SKU
PIN242120400
SIZE
117 x 232 x 327
...Read more
View Product
£360.00
Victron Energy Phoenix Inverter Compact 12V 1200VA VE.Bus – CIN121220000
The Phoenix Inverter Compact is a pure sine wave inverter with a high efficiency. It is developed for professional duty and suitable for the wide range of applications.The Phoenix Inverters Compact is available from 1200VA up to 2000VA in 12V or 24V.
Features
SinusMax – Superior engineering
Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.
Extra start-up power
A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances.
Virtually unlimited power thanks to parallel and 3-phase operation capability
Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible.
To transfer the load to another AC source: the automatic transfer switch
If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds).
Communications interface
These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control.
Brand
Victron Energy
Manufacturer Part Number
CIN121220000
GTIN
8719076021629
Voltage
12V
Cont. Output Power at 25°C
1200VA
Peak Power
2400W
Output AC Voltage
230V
Protection Category
IP21
Efficiency
92%
Bluetooth Enabled
No
Dimensions
H375 x W214 x D110mm
Weight
10Kg
Warranty
5 Years
...Read more
View Product
£465.00
Victron Energy Phoenix Inverter 12V 1600VA Smart – PIN122161000
Previous part number - PIN122160000
The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems.
It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.
Features
Bluetooth built-in: fully configurable with a tablet or smartphone
Low battery voltage alarm
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage: 210 – 245V
Frequency: 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level
Alarm relay
Monitoring:
In- and output voltage, load and alarms
VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
Brand
Victron Energy
Manufacturer Part Number
PIN122160000
GTIN
8719076042686
Voltage
12V
Cont. Output Power at 25°C
1600VA
Peak Power
3000W
Output AC Voltage
230V
Protection Category
IP21
Efficiency
92%
Bluetooth Enabled
Yes
Dimensions
H485 x W219 x D125mm
Weight
12Kg
Warranty
5 Years
...Read more
View Product
£499.00
Victron Energy Phoenix Inverter 12V 2000VA Smart – PIN122201000
The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems.
It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.
Features
Bluetooth built-in: fully configurable with a tablet or smartphone
Low battery voltage alarm
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage: 210 – 245V
Frequency: 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level
Alarm relay
Monitoring:
In- and output voltage, load and alarms
VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
Brand
Victron Energy
Manufacturer Part Number
PIN122201000 was
PIN122200000
GTIN
8719076042655
Voltage
12V
Cont. Output Power at 25°C
2000VA
Peak Power
4000W
Output AC Voltage
230V
Protection Category
IP21
Efficiency
92%
Bluetooth Enabled
Yes
Dimensions
H485 x W219 x D125mm
Weight
13Kg
Warranty
5 Years
Country of Manufacture
China
...Read more
View Product
£599.00
Victron Energy MultiPlus Compact 24/1600/40-16 230V – PMP242160000
The new style Victron Energy MultiPlus 24/1600 Inverter Charger is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.
Features of the MultiPlus 24/1600
Uninterrupted AC power (UPS function)
In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
Remote Monitoring and Control
When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backupgenerator and more…”
Parallel Operation and Three Phase CapabilityUp to six Multis can operate in parallel to achieve higher power output.In addition to parallel connection, three units can be configured for three-phase output
PowerAssist – Boosting the Capacity of Shore or Generator PowerThis feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
Want to have perfect control over your system from wherever you are whilst using your MultiPlus 24/1600, why not have a look at the Cerbo GX Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.
...Read more
View Product
£670.00
Victron Energy Phoenix Inverter Compact 12V 2000VA VE.Bus – CIN122200000
The Phoenix Inverter Compact is a pure sine wave inverter with a high efficiency. It is developed for professional duty and suitable for the wide range of applications.The Phoenix Inverters Compact is available from 1200VA up to 2000VA in 12V or 24V.
Features
SinusMax – Superior engineering
Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.
Extra start-up power
A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances.
Virtually unlimited power thanks to parallel and 3-phase operation capability
Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible.
To transfer the load to another AC source: the automatic transfer switch
If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds).
Communications interface
These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control.
Brand
Victron Energy
Manufacturer Part Number
CIN122200000
GTIN
8719076037514
Voltage
12V
Cont. Output Power at 25°C
2000VA
Peak Power
4000W
Output AC Voltage
230V
Protection Category
IP21
Efficiency
92%
Bluetooth Enabled
No
Dimensions
H520 x W255 x D125mm
Weight
12Kg
Warranty
5 Years
...Read more
View Product
£699.00
Victron Energy Phoenix Inverter 12V 3000VA Smart – PIN122300000
The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems.
It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.
Features
Bluetooth built-in: fully configurable with a tablet or smartphone
Low battery voltage alarm
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage: 210 – 245V
Frequency: 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level
Alarm relay
Monitoring:
In- and output voltage, load and alarms
VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
Brand
Victron Energy
Manufacturer Part Number
PIN122300000
GTIN
8719076047360
Voltage
12V
Cont. Output Power at 25°C
3000VA
Peak Power
6000W
Output AC Voltage
230V
Protection Category
IP21
Efficiency
93%
Bluetooth Enabled
Yes
Dimensions
H533 x W285 x D150mm
Weight
19Kg
Warranty
5 Years
Country of Manufacture
China
...Read more
View Product
£749.00
Victron Energy Phoenix Inverter Compact 12V 1600VA VE.Bus – CIN121620000
The Phoenix Inverter Compact is a pure sine wave inverter with a high efficiency. It is developed for professional duty and suitable for the wide range of applications.The Phoenix Inverters Compact is available from 1200VA up to 2000VA in 12V or 24V.
Features
SinusMax – Superior engineering
Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.
Extra start-up power
A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances.
Virtually unlimited power thanks to parallel and 3-phase operation capability
Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible.
To transfer the load to another AC source: the automatic transfer switch
If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds).
Communications interface
These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control.
Brand
Victron Energy
Manufacturer Part Number
CIN121620000
GTIN
Brand
Victron Energy
Manufacturer Part Number
CIN121620000
GTIN
8719076021636
Voltage
12V
Cont. Output Power at 25°C
1600VA
Peak Power
3000W
Output AC Voltage
230V
Protection Category
IP21
Efficiency
92%
Bluetooth Enabled
No
Dimensions
H375 x W214 x D110mm
Weight
10Kg
Warranty
5 Years
Voltage
12V
Cont. Output Power at 25°C
1600VA
Peak Power
3000W
Output AC Voltage
230V
Protection Category
IP21
Efficiency
92%
Bluetooth Enabled
No
Dimensions
H375 x W214 x D110mm
Weight
10Kg
Warranty
5 Years
...Read more
View Product
£749.00
Victron Energy Phoenix Inverter 24/3000 230V SMART PIN242300000
Victron Phoenix Inverter 24/3000 Smart (PIN242300000) – Pure Sine Wave
The Victron Phoenix Inverter 24/3000 Smart is a powerful and intelligent pure sine wave inverter designed to convert 24V DC battery power into 230V AC electricity — perfect for off-grid and mobile applications where reliability is crucial. Whether you’re powering sensitive electronics in a motorhome, boat, tiny house, or solar energy system, the Phoenix 24/3000 Smart delivers dependable, clean energy exactly when and where you need it.
Key Features of the Victron Phoenix Inverter 24V 3000VA Smart:
Pure Sine Wave Output: Ensures stable and clean AC power, ideal for sensitive electronics like computers, LED lights, and medical devices.
3,000VA Power Capacity: Powerful enough to handle most common appliances in homes, RVs, boats, and caravans, from kitchen appliances to power tools.
Bluetooth Connectivity: Fully configurable using the VictronConnect app on your smartphone or tablet. Monitor and adjust settings such as:
Low battery voltage alarm
Low battery cut-off/restart levels
Dynamic cut-off based on load conditions
Output voltage (210-245V) and frequency (50Hz or 60Hz)
ECO mode on/off and sense level adjustments
Alarm relay settings
VE.Direct Communication Port: For advanced monitoring and configuration, the VE.Direct port can be connected to a computer using the VE.Direct to USB interface for further customisation and real-time data.
Proven Reliability and Advanced Design
The Victron Phoenix Inverter incorporates a full bridge plus toroidal transformer topology, providing excellent performance and proven reliability. This design makes the inverter short-circuit proof and protects it from overheating, even under heavy loads or high ambient temperatures. The high start-up power capability allows it to start demanding appliances such as power converters, LED lamps, and electric tools.
ECO Mode for Energy Efficiency
In ECO mode, the inverter enters standby when the load falls below a preset threshold, conserving energy by switching on only for brief periods every 2.5 seconds to check the load. When demand exceeds the threshold, the inverter remains active, ensuring efficient energy use while extending battery life.
Remote On/Off and LED Diagnosis
The inverter supports a remote on/off switch or relay connection for easy control from a distance. Additionally, LED diagnosis provides real-time system status, ensuring you stay informed about any system issues (refer to the manual for more details).
Seamless AC Switching with Filax or MultiPlus
For uninterrupted power supply, Victron recommends the Filax Automatic Transfer Switch, which ensures minimal switchover time (less than 20 milliseconds) to maintain power continuity for sensitive equipment like computers. Alternatively, use the MultiPlus inverter with its built-in transfer switch for seamless power transitions between different AC sources.
Benefits of the Victron Phoenix Inverter 24/3000 Smart:
Powerful and Flexible: Handles a wide range of loads, making it ideal for off-grid, mobile, or backup applications.
Energy Savings: With ECO mode and dynamic cut-off features, the inverter optimises energy use, reducing costs and extending battery life.
Remote Control and Monitoring: Configure and monitor the system with Bluetooth or via a computer using VE.Direct.
Input voltage range: 18.6-34 VDC
Output voltage: 230VAC +/- 2%
Continuous AC power at 25ºC: 3000VA
Continuous power at 25ºC/40ºC/65ºC: 2400/2200/1700W
Peak power: 6000VA
Dynamic (load dependent) DC low shut down: Fully configurable
Max. efficiency: 92%
No-load power consumption: 13W
Default zero load power in ECO mode: 1.9W
Operating temperature: -40ºC to +65ºC (fan assisted cooling)
Stop & start power ECO-mode: Adjustable
DC (battery) cable connection: 2+2 M8 bolts
230V AC cable connection: Screw terminals
Ingress Protection rating: IP21
Weight: 19kg
Overall dimensions: 485 (L) x 285(W) x 150mm (H)
...Read more
View Product
£849.00
Victron Energy Phoenix Inverter 12V 3000VA VE.Bus – PIN123020000
Pure sine wave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds.
SinusMax – Superior engineeringDeveloped for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem free, to any load.
Parallel and 3-phase operation capabilityUp to 6 Phoenix Inverters can operate in parallel to achieve higher power output. Six 24 V 5000 VA units, for example, will provide 24 kW / 30 kVA output power. Operation in 3-phase configuration is also possible.
Features
SinusMax – Superior engineering
Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.
Extra start-up power
A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances.
Virtually unlimited power thanks to parallel and 3-phase operation capability
Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible.
To transfer the load to another AC source: the automatic transfer switch
If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds).
Communications interface
These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control.
Brand
Victron Energy
Manufacturer Part Number
PIN123020000
GTIN
8719076023579
Voltage
12V
Cont. Output Power at 25°C
3000VA
Peak Power
6000W
Output AC Voltage
230V
Protection Category
IP21
Efficiency
93%
Bluetooth Enabled
No
Dimensions
H362 x W258 x D218mm
Weight
18Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
View Product
Out of Stock
£1,099.00
Victron Energy Phoenix Inverter 48V 5000VA Smart – PIN482500000
The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems.
It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.
Features
Bluetooth built-in: fully configurable with a tablet or smartphone
Low battery voltage alarm
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage: 210 – 245V
Frequency: 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level
Alarm relay
Monitoring:
In- and output voltage, load and alarms
VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
Brand
Victron Energy
Manufacturer Part Number
PIN482500000
GTIN
8719076047940
Voltage
48V
Cont. Output Power at 25°C
5000VA
Peak Power
10000W
Output AC Voltage
230V
Protection Category
IP21
Efficiency
96%
Bluetooth Enabled
Yes
Dimensions
H555 x W295 x D160mm
Weight
28Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
£1,254.00
Victron Energy Phoenix Inverter 48V 5000VA VE.Bus – PIN485020000
Pure sine wave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds.
SinusMax – Superior engineeringDeveloped for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem free, to any load.
Parallel and 3-phase operation capabilityUp to 6 Phoenix Inverters can operate in parallel to achieve higher power output. Six 24 V 5000 VA units, for example, will provide 24 kW / 30 kVA output power. Operation in 3-phase configuration is also possible.
Features
SinusMax – Superior engineering
Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.
Extra start-up power
A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances.
Virtually unlimited power thanks to parallel and 3-phase operation capability
Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible.
To transfer the load to another AC source: the automatic transfer switch
If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds).
Communications interface
These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control.
Brand
Victron Energy
Manufacturer Part Number
PIN485020000
GTIN
8719076023883
Voltage
48V
Cont. Output Power at 25°C
5000VA
Peak Power
10000W
Output AC Voltage
230V
Protection Category
IP21
Efficiency
95%
Bluetooth Enabled
No
Dimensions
H444 x W328 x D240mm
Weight
30Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
View Product
£1,310.00
Victron Energy Phoenix Inverter 24V 5000VA VE.Bus - PIN245020000
Pure sine wave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds.
SinusMax – Superior engineeringDeveloped for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem free, to any load.
Parallel and 3-phase operation capabilityUp to 6 Phoenix Inverters can operate in parallel to achieve higher power output. Six 24 V 5000 VA units, for example, will provide 24 kW / 30 kVA output power. Operation in 3-phase configuration is also possible.
Features
SinusMax – Superior engineering
Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.
Extra start-up power
A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances.
Virtually unlimited power thanks to parallel and 3-phase operation capability
Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible.
To transfer the load to another AC source: the automatic transfer switch
If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds).
Communications interface
These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control.
Brand
Victron Energy
Manufacturer Part Number
PIN245020000
GTIN
8719076023760
Voltage
24V
Cont. Output Power at 25°C
5000VA
Peak Power
10000W
Output AC Voltage
230V
Protection Category
IP21
Efficiency
94%
Bluetooth Enabled
No
Dimensions
H444 x W328 x D240mm
Weight
30Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
View Product
Out of Stock
£1,399.00
Victron Energy Phoenix Inverter 24V 5000VA Smart – PIN242500000
The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems.
It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.
Features
Bluetooth built-in: fully configurable with a tablet or smartphone
Low battery voltage alarm
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage: 210 – 245V
Frequency: 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level
Alarm relay
Monitoring:
In- and output voltage, load and alarms
VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
To transfer the load to another AC source: the automatic transfer switch
For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
Brand
Victron Energy
Manufacturer Part Number
PIN242500000
GTIN
8719076047933
Voltage
24V
Cont. Output Power at 25°C
5000VA
Peak Power
10000W
Output AC Voltage
230V
Protection Category
IP21
Efficiency
95%
Bluetooth Enabled
Yes
Dimensions
H595 x W295 x D160mm
Weight
29Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
0 Kits Selected✕
Phoenix Inverter – Pure Sine Wave Power for Reliable Performance
Not all inverters are created equal, and that’s where the Phoenix Inverter from Victron Energy stands out. It produces a pure sine wave output, ensuring clean, stable power that’s safe for even the most sensitive electronics. Unlike cheaper modified sine wave inverters, a Victron Phoenix Inverter prevents power surges, flickering, and device damage, making it perfect for running laptops, medical equipment, refrigerators, and other delicate appliances.
Victron Phoenix – High-Efficiency Power for Any Setup
Whether you need a compact inverter for a campervan or a high-power system for industrial use, the Victron Phoenix range has a solution. With power ratings from a few hundred watts to several kilowatts, these inverters can be used individually or in parallel for increased power output. Designed for maximum efficiency, the Victron Energy Phoenix Inverter minimizes energy loss, ensuring more power reaches your devices and less is wasted as heat, helping you get the most from your energy source.
Victron Energy Phoenix Inverter – Smart Control & Rugged Design
Take control of your power system from anywhere with Victron’s smart app and remote monitoring features. Many models in the Victron Energy Phoenix Inverter range come equipped with Bluetooth connectivity, allowing you to track performance, adjust settings, and diagnose issues in real-time. Built with rugged durability, these inverters are designed to handle extreme temperatures, vibrations, and tough conditions, making them ideal for marine, mobile, and off-grid applications. Whether you’re on the road, at sea, or powering a remote site, the Victron Phoenix Inverter ensures reliable performance wherever you go.
Recommended Full Kits
Loading...
£2,798.31
£3,231.11
£2,798.31
£3,448.11
£3,231.11
Loading...
£3,559.58
£3,508.58
£2,798.31
£3,231.11
Loading...
£3,960.58
£3,610.58
£3,610.58
£3,460.58
£3,610.58
£3,448.11
£3,460.58
Loading...
£1,287.58
£1,019.18
£1,543.99
£2,086.26
£2,408.61
£2,036.61
£1,287.58
£1,019.18
£1,543.99
£2,086.26
FAQs
Learn more about our business & products below
You should select a Phoenix Inverter based on the total wattage of the appliances you need to run. Victron offers models ranging from a few hundred watts to several kilowatts. If you’re unsure, it’s best to go for a slightly higher power rating to accommodate future needs.
Yes! The Phoenix Inverter range allows for parallel and three-phase operation, meaning you can combine multiple units to increase overall power output for larger applications.
Many Victron Phoenix Inverters include built-in Bluetooth for remote monitoring via the VictronConnect app, allowing you to track performance, adjust settings, and troubleshoot issues from your smartphone or tablet.
Yes, Victron Energy Phoenix Inverters are designed with overload, short circuit, and over-temperature protection, ensuring safety and longevity.
The Victron Energy Phoenix Inverter is designed for high efficiency, minimizing energy loss during DC-to-AC conversion. This means more usable power for your devices and less wasted energy, making it a cost-effective and eco-friendly choice.
Yes, the Victron Phoenix Inverter is excellent for emergency backup power in homes and businesses, providing seamless AC power during outages.