Victron Energy - Battery to Battery - DC to DC Chargers
Victron DC to DC Chargers: Powering the Future, Today
Unparalleled Efficiency in Power Conversion
In a world increasingly reliant on efficient and reliable power management solutions, Victron Energy's DC to DC chargers emerge as a cornerstone of innovation and performance. Tailored for an array of applications – from automotive to marine, and from off-grid setups to industrial systems – these chargers represent the pinnacle of power conversion technology.
14 Products Found
£149.99
Victron Energy Orion-Tr Smart 24/12V 20A (240W) Isolated DC-DC Charger – ORI241224120
Victron Energy Orion-Tr Smart 24/12V 20A (240W) Isolated DC-DC Charger – ORI241224120
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Features
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
Battery charge algorithm (configurable) or fixed output.
Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
For lithium batteries absorption time is fixed, default 2 hours.
Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Brand
Victron Energy
Manufacturer Part Number
ORI241224120
gtin
8719076046080
Voltage
24/12V
Cont. Output Current
20A
Protection Category
IP43 (electronic components), IP22 (connection area)
Efficiency
88%
Bluetooth Enabled
Yes
Dimensions
H130 x W186 x D70mm
Weight
1.3Kg
Warranty
5 Years
...Read more
View Product
Best Seller
£159.99
Victron 18A 12V Smart Dc To Dc Automatic Multi-Stage Intelligent Battery-To-Battery Charger ORI121222120
Victron 18A 12V Smart Dc To Dc Automatic Multi-Stage Intelligent Battery-To-Battery Charger ORI121222120
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Features
Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
Battery charge algorithm (configurable) or fixed output.
Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
For lithium batteries absorption time is fixed, default 2 hours.
Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
PRODUCT CODE: ORI121222120
DC to DC (Battery to Battery) Wiring Diagram, Information and Help
Datasheet
Victron Orion Isolated Datasheet
Installation and Help
Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here
Video
...Read more
View Product
£180.99
Victron Energy Orion-Tr Smart 12/24V 15A (360W) Non-isolated DC-DC Charger – ORI122436140
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Features
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
Battery charge algorithm (configurable) or fixed output.
Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
For lithium batteries absorption time is fixed, default 2 hours.
Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Brand
Victron Energy
Manufacturer Part Number
ORI122436140
gtin
8719076048961
Voltage
12/24V
Cont. Output Current
15A
Protection Category
IP43 (electronic components), IP22 (connection area)
Efficiency
88%
Bluetooth Enabled
Yes
Dimensions
H130 x W186 x D80mm
Weight
1.8Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
View Product
£186.99
Victron Energy Orion-Tr 12/24V 15A (360W) Isolated DC-DC Converter – ORI122441110
Remote on-offThe remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual)
Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system
All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel
IP43 protectionWhen installed with the screw terminals oriented downwards
Screw terminalsNo special tools are needed for installation.
Input fuseOn 12V and 24V input models only.
Brand
Victron Energy
Manufacturer Part Number
ORI122441110
gtin
8719076038832
Voltage
12/24V
Cont. Output Current
15A
Protection Category
IP43
Efficiency
88%
Bluetooth Enabled
No
Dimensions
H130 x W186 x D80mm
Weight
1.8Kg
Warranty
5 Years
...Read more
View Product
£201.99
Orion-Tr Smart 24/12V-30A Non-Isolated DC-DC Charger ORI241236140
Orion-Tr Smart 24/12V-30A Non-Isolated DC-DC Charger ORI241236140
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Features
Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
Battery charge algorithm (configurable) or fixed output.
Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
For lithium batteries absorption time is fixed, default 2 hours.
Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
PRODUCT CODE: ORI241236140
DC to DC (Battery to Battery) Wiring Diagram, Information and Help
Datasheet
Victron Orion Non-Isolated Datasheet
Installation and Help
Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here
Wiring Diagram
Video
...Read more
View Product
£208.38
Victron Orion-Tr Smart 12V 18A Isolated DC-DC B2B Split Charge Kit
Victron Orion 12V 18A Smart Isolated DC-DC B2B Split Charge Kit.
These Battery to Battery (B2B) charging kits are designed to charge your vehicle's leisure battery whilst driving and are appropriate for vehicles with Smart alternators, usually Euro 5 / Euro 6 compliant alternators.
This Kit consists of:
Victron Orion Smart 18amp Isolated Battery to Battery Charger (ORI121222120)16mm Heavy Duty Flexible Battery Cable (2m of black as standard and variable red up to 7m depending on installation location)2 x Victron Midi Fuse Holders2 x Victron 60amp Midi Fuses8 x 16mm M8 Battery Lugs
Features
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
- For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
DC to DC (Battery to Battery) Wiring Diagram, Information and Help
Datasheet
Victron Orion Isolated Datasheet
Installation and Help
Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here
Video
...Read more
View Product
£213.00
Victron Energy Orion-Tr Smart 12/12-30A (360W) Non-Isolated DC-DC Charger – ORI121236140
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Features
Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
Battery charge algorithm (configurable) or fixed output.
Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
For lithium batteries absorption time is fixed, default 2 hours.
Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
PRODUCT CODE: ORI121236140
DC to DC (Battery to Battery) Wiring Diagram, Information and Help
DC to DC (Battery to Battery) Wiring Diagram, Information and Help
Datasheet
Victron Orion Non-Isolated Datasheet
Installation and Help
Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here
Wiring Diagram
Video
...Read more
View Product
£213.49
Victron Energy Orion-TR SMART 24/24-17A (400W) Non-Isolated DC-DC Charger - ORI242440140
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Features
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
Battery charge algorithm (configurable) or fixed output.
Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
For lithium batteries absorption time is fixed, default 2 hours.
Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downward.
Screw terminals
No special tools needed for installation.
Input fuse (not replaceable)
Brand
Victron Energy
Manufacturer Part Number
ORI242440140
Input voltage range
20-35V
Under voltage shut down
14V
Under voltage restart
15V
Nominal output voltage
24.2V
Output voltage adjust range
20-30V
Cont. output current at nominal output voltage and 40°C
17A
Short circuit output current
40A
Cont. output power at 25°C
480W
Cont. output power at 40°C
400W
Efficiency
89%
DC connection
Screw Terminals
IP Rating
IP43
Dimensions
H130 x W186 x D80mm
Weight
1.6Kg
Warranty
5 Years
...Read more
View Product
£247.99
Orion-Tr Smart 12/12V-30A Isolated DC-DC Charger ORI121236120
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Features
Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
Battery charge algorithm (configurable) or fixed output.
Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
For lithium batteries absorption time is fixed, default 2 hours.
Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
PRODUCT CODE: ORI121236120
Datasheet
Victron Orion Isolated Datasheet
Installation and Help
Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here
Video
...Read more
View Product
£248.99
Victron Energy Orion-Tr Smart 12/24V 15A (360W) Isolated DC-DC Charger – ORI122436120
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Features
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
Battery charge algorithm (configurable) or fixed output.
Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
For lithium batteries absorption time is fixed, default 2 hours.
Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
DC to DC (Battery to Battery) Wiring Diagram, Information and Help
Brand
Victron Energy
Manufacturer Part Number
ORI122436120
GTIN
8719076047704
Voltage
12/24V
Cont. Output Current
15A
Protection Category
IP43 (electronic components), IP22 (connection area)
Efficiency
88%
Bluetooth Enabled
Yes
Dimensions
H130 x W186 x D80mm
Weight
1.8Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
View Product
£259.99
Victron Orion XS Buckboost 50A Non-Isolated DC-DC Charger - ORI121217050
Victron Orion Buckboost 50A (700W) Non-Isolated DC-DC Charger ORI121217040 - Now called XS
Engineered from the ground up, the Smart BuckBoost redefines adaptive DC-DC charging. For use in dual battery systems charged with an (intelligent) alternator. This device not only ensures top-tier performance but also guarantees the safety of your system.
Stay in charge with configurable input and output currents, and rest assured that your Smart BuckBoost will run at full capacity up to 40°C. The innovative aluminium circuit board cooling technology delivers an astonishing 98% efficiency without the need for fans.
As an integral part of your Victron system, the Smart BuckBoost offers full (remote) monitoring and control capabilities, giving you complete command of your device and system.
Fully configurable
Engine shutdown detection
Intelligent charge algorithms
Efficient cooling
Works with VictronConnect
Remote monitoring optional
Exploring the Advanced Features of the Victron Orion XS Buckboost 50A (700W) Non-Isolated DC-DC Charger ORI121217050The Victron Orion XS Buckboost 50A (700W) Non-Isolated DC-DC Charger, model ORI121217040, represents a significant advancement in the realm of power management and battery charging technology. This article delves into the technical aspects and new features of this innovative product, highlighting its potential impact on various applications.Overview of the Victron Orion XS Buckboost 50AThe Victron Orion XS Buckboost 50A is a high-power, non-isolated DC-DC charger designed to efficiently manage power supply and charging in a range of applications, from marine and automotive to off-grid solar systems. Its primary function is to ensure a stable output voltage from a variable input voltage source, making it ideal for systems where voltage fluctuations are common.Key Features and Technical Specifications1. High Power Output: The charger boasts a substantial power output of 700W, capable of handling significant energy demands.2. Wide Input Voltage Range: It operates efficiently across a broad input voltage range, accommodating fluctuations and ensuring a stable output.3. Advanced Buck-Boost Technology: The charger employs state-of-the-art buck-boost technology, enabling it to either step down (buck) or step up (boost) the input voltage to achieve the desired output voltage.4. Adjustable Output Voltage: Users can adjust the output voltage to suit specific requirements, providing flexibility across different battery types and systems.
5. Non-Isolated Design: The non-isolated nature of this charger allows for a more compact and efficient design, making it suitable for applications where space is at a premium.6. Smart Cooling System: The device includes an intelligent cooling system that adjusts the fan speed based on the load, ensuring optimal performance and longevity.7. Remote Monitoring and Control: Integration with Victron's remote management platforms, such as the VictronConnect app, allows for easy monitoring and adjustments.8. Built-in Safety Features: The charger is equipped with several safety features, including over-temperature protection, short-circuit protection, and reverse polarity protection.Applications and Use CasesThe Victron Orion XS Buckboost 50A is versatile and can be used in various scenarios:- **Marine Applications**: Ideal for boats where stable power is needed for navigation systems, lighting, and other electronics.- **Automotive,RVs, Campers & Motorhomes**: Useful in vehicles and recreational vehicles for managing power between different battery systems.- **Off-Grid Solar Systems**: Enhances solar power setups by ensuring consistent charging and power supply to batteries.- **Industrial Applications**: Can be used in industrial settings where reliable DC power is critical.Installation and SetupThe installation process is straightforward, but it requires a basic understanding of electrical systems. It's crucial to follow the manufacturer's guidelines to ensure safety and optimal performance. The charger should be installed in a location with adequate ventilation to facilitate cooling.ConclusionThe Victron Orion XS Buckboost 50A (700W) Non-Isolated DC-DC Charger ORI121217040 is a robust and versatile solution for managing DC power supply and charging in a variety of settings. Its advanced features, such as adjustable output voltage, smart cooling, and remote monitoring capabilities, make it a top choice for professionals and enthusiasts seeking reliable and efficient power management solutions. As technology continues to evolve, products like the Victron Orion XS Buckboost 50A are setting new standards in the field of power electronics.
Victron Orion XS Buckboost 50A Datasheet
Victron Orion XS Buckboost 50A Manual
...Read more
View Product
£261.40
Victron Orion-Tr Smart 12V 30A Non Isolated DC-DC B2B Split Charge Kit
Victron Orion-Tr Smart 12V 30A Non-Isolated DC-DC B2B Split Charge Kit.
These Battery to Battery (B2B) charging kits are designed to charge your vehicle's leisure battery whilst driving and are appropriate for vehicles with Smart alternators, usually Euro 5 / Euro 6 compliant alternators.
This Kit consists of:
Victron Orion 30amp Non-Isolated Battery to Battery Charger (ORI121236140)16mm Heavy Duty Flexible Battery Cable (2m of black as standard and variable red up to 7m depending on installation location)2 x Victron Midi Fuse Holders2 x Victron 60amp Midi Fuses8 x 16mm M8 Battery Lugs
Features
Bluetooth Smart enabled
Any Bluetooth-enabled smartphone, tablet or another device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
- For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged.
- For lithium batteries absorption time is fixed, default 2 hours.
- Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
DC to DC (Battery to Battery) Wiring Diagram, Information and Help
Datasheet
Victron Orion Non-Isolated Datasheet
Installation and Help
Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here
Wiring Diagram
Video
...Read more
View Product
£280.99
Victron Orion XS 1400 DC-DC battery charger ORI242417040 - Suitable for 12V-12V, 12V-24V, 24V-12V and 24V-24V DC charging, up to 1400W
Victron Orion XS 1400 DC-DC battery charger ORI242417040
Engineered from the ground up, the Orion XS 1400 is Victron Energy's highly anticipated next generation muti-voltage DC-DC charger that redefines charging on the move for dual battery systems. The XS 1400 version differs from the XS in that it can accept an input from either a 12V or 24V alternator and charge either a 12V or 24V battery, with a maximum output of 50A , making it powerful and versatile.
It is fully compatible with smart alternators found in Euro 5 or 6 vehicles and has a wide input voltage range to accommodate input cable voltage drop. The input and output current limits can be set by the user and innovative cooling technology provides a 98% efficiency without the need for a fan or heatsink, enabling a lightweight and compact, yet powerful charging unit. There are 8 pre-programmed charging algorithms, or you can create a fully customisable algorithm to match the battery manufacturer's charging voltage requirements.
The Orion XS 1400 will produce its full rated output up to 40°C and multiple units can be connected in parallel to increase charge output. It can also be used in fixed-voltage power supply mode with a user-configurable output of 10-35V. A host of electronic protection features guarantee the safety of your alternator and your battery, and physical protection is assured thanks to its P65 dust and water-proof rating.
The unit is fully configurable via Bluetooth using the VictronConnect app and features a VE.Direct port for connection to a Cerbo GX or Ekrano GX. This allows remote monitoring and control of the Orion XS 1400 and provides seamless integration with the rest of your Victron system.
Multi-voltage use
The Orion XS 1400's wide input and output voltage range enable it to be used with any combination of 12V & 24V systems on the input and output, making it suitable for a wide range of vehicles and auxiliary battery systems. The 50A charge current provides a maximum power output of 1400W @24V, and 700W @12V, and an unlimited number of units can be connected in parallel to increase the output (where alternator capacity allows). Settings in the Victron Connect App allow you to select your alternator voltage and type, and your auxiliary battery voltage.
Smart alternator compatibility
Regardless of the variable input voltage produce by smart alternators, the charger keeps operating and maintains the chosen algorithm for perfect battery charging. The on-board engine running detection system ensures that the charger only activates when the alternator supplies power (i.e. when the engine is running) and prevents your vehicle starter battery being drained when the engine is off.
Alternator overload protection
The input and output currents can be precisely controlled in increments of 0.1A using simple controls in the Victron Connect App. This input current control guards against alternators being overloaded (especially when using lithium batteries that can accept very high charge currents) and the output current control allows you to set the charge current to suit the type and capacity of battery being charged.
Adaptive charge algorithm
The Orion XS 1400 includes customisable charging algorithms and 8 pre-set battery modes. For lead acid batteries, these settings ensure optimal absorption times for both shallow and deep discharges. During shallow discharges of lead-acid batteries the absorption time must be kept short in order to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged.
Comprehensive electronic protection
The Orion XS 1400 comes equipped with comprehensive electronic protection against overload, short circuit and excessive temperatures, and will automatically reduce the output power when maximum product temperature is reached. To prevent damaging lithium batteries the charger will turn off automatically at low temperatures, and to protect the starter battery from being over-discharged it will shut down when the input voltage drops below a configurable lockout value, and restart when the input voltage rises above the restart value.
Dust tight & waterproof
The Orion XS 1400's ingress protection rating of IP65 makes it dust-tight, protected against heavy rain, and suitable for use in harsh environments such as vehicle engine bays and boat engine rooms.
Features
Ultimate flexibility - charge a 12V or 24V battery from a 12V or 24V alternator
Adjustable input & output current in 0.1A steps
'Smart' or standard alternator compatible
Separation of starter and auxiliary batteries
Adaptive 4-stage charging algorithm
Fully programmable battery charging profile
Suitable for all battery types (inc. lithium)
Automatic temperature-compensated charging
Comprehensive electronic protection
Unlimited parallel operation to increase output
Power supply mode
Remote On/Off
Bluetooth Smart enabled
VE.Direct port for connection to Cerbo GX or Ekrano GX
IP65 waterproof protection
Spec
Value
Input Voltage Range
9V – 35V
Output Voltage Range
10V – 35V
Adjustable Current
1 – 50A (Input/Output)
Efficiency
Up to 98.5%
Continuous Power Output
700W (at 50A, 12→12/12→24/24→12V up to 40°C), 1400W (24→24V up to 35°C)
Standby Current
<1.5mA
Ingress Protection
IP65 (dust-tight, water-resistant)
Charge Modes
Bulk, Absorption, Float, Storage
Battery Support
Lithium (LiFePO4), AGM, Gel, Flooded
Connection
VE.Direct, Remote On/Off, Bluetooth Smart
Mounting Orientation
Vertical (terminals down)
...Read more
View Product
£309.99
Victron Orion XS Buckboost 50A Non Isolated DC-DC B2B Split Charge Kit
Victron Orion XS Buckboost 50A 700w Non Isolated DC-DC B2B Split Charge Kitt.
These Battery to Battery (B2B) charging kits are designed to charge your vehicle's leisure battery whilst driving and are appropriate for vehicles with Smart alternators, usually Euro 5 / Euro 6 compliant alternators.
This kit consists of:
Victron Orion XS Buckboost 50amp Non-Isolated Battery to Battery Charger (ORI121217040)25mm Heavy Duty Flexible Battery Cable (2m of black as standard and variable red up to 7m depending on installation location)2 x Victron Midi Fuse Holders2 x Victron 100amp Midi Fuses8 x 25mm M8 Battery Lugs
PLEASE NOTE ONLY 2M OF NEGATIVE CABLE IS REQUIRED AS THE CHARGER CAN BE GROUNDED TO THE NEAREST GROUND (CHASSIS, BUSBAR ETC).
Features
Fully configurable
Engine shutdown detection
Intelligent charge algorithms
Efficient cooling
Works with VictronConnect
Overview of the Victron Orion XS Buckboost 50AThe Victron Orion XS Buckboost 50A is a high-power, non-isolated DC-DC charger designed to efficiently manage power supply and charging in a range of applications, from marine and automotive to off-grid solar systems. Its primary function is to ensure a stable output voltage from a variable input voltage source, making it ideal for systems where voltage fluctuations are common.Key Features and Technical Specifications1. High Power Output: The charger boasts a substantial power output of 700W, capable of handling significant energy demands.2. Wide Input Voltage Range: It operates efficiently across a broad input voltage range, accommodating fluctuations and ensuring a stable output.3. Advanced Buck-Boost Technology: The charger employs state-of-the-art buck-boost technology, enabling it to either step down (buck) or step up (boost) the input voltage to achieve the desired output voltage.4. Adjustable Output Voltage: Users can adjust the output voltage to suit specific requirements, providing flexibility across different battery types and systems.
5. Non-Isolated Design: The non-isolated nature of this charger allows for a more compact and efficient design, making it suitable for applications where space is at a premium.6. Smart Cooling System: The device includes an intelligent cooling system that adjusts the fan speed based on the load, ensuring optimal performance and longevity.7. Remote Monitoring and Control: Integration with Victron's remote management platforms, such as the VictronConnect app, allows for easy monitoring and adjustments.8. Built-in Safety Features: The charger is equipped with several safety features, including over-temperature protection, short-circuit protection, and reverse polarity protection.
DC to DC (Battery to Battery) Wiring Diagram, Information and Help
Wiring Diagram
Video
...Read more
View Product
0 Kits Selected✕
Key Features of Victron DC to DC Chargers
-
High-Efficiency Conversion: Victron's DC to DC chargers are designed to maximize power conversion efficiency. This means more of your stored energy is available for use, reducing waste and improving overall system performance.
-
Advanced Charging Algorithms: These chargers come equipped with sophisticated charging algorithms. They ensure optimal charging of your batteries, extending their lifespan and maintaining their health over time.
-
Multiple Input and Output Ranges: Catering to a diverse range of power requirements, Victron DC to DC chargers are available in various input and output ranges. This versatility ensures compatibility with a wide array of batteries and electrical systems.
-
Smart Connectivity and Control: With options for Bluetooth connectivity and remote monitoring, these chargers allow for easy tracking and adjustment of charging parameters. This smart control enhances user convenience and allows for precise energy management.
-
Robust and Durable Design: Built to withstand harsh conditions, Victron's DC to DC chargers are not only efficient but also incredibly robust. Their durability makes them suitable for challenging environments, from the high seas to remote off-grid locations.
-
Easy Integration with Existing Systems: These chargers are designed for ease of installation and integration with existing power systems. Whether as part of a new setup or an upgrade to an existing system, they fit seamlessly into your energy management solution.
Applications Across Sectors
Victron DC to DC chargers are not limited to a single application. They are perfect for automotive applications, ensuring your vehicle's battery is optimally charged. In marine applications, they provide reliable power management, vital for long voyages. For off-grid living, they offer a dependable way to manage solar or wind-generated power. Even in industrial settings, these chargers play a critical role in maintaining the efficiency and reliability of power systems.
Commitment to Environmental Sustainability
In line with Victron Energy's commitment to sustainability, their DC to DC chargers support eco-friendly power solutions. They enable efficient use of renewable energy sources, contributing to a greener and more sustainable future.
Conclusion
Victron's range of DC to DC chargers is more than just a product line; it's a comprehensive power management solution, crafted to meet the demands of modern energy needs. With their advanced technology, robust design, and versatile applications, these chargers are an ideal choice for anyone looking to optimize their power systems. Embrace the future of efficient power conversion with Victron DC to DC chargers.
Recommended Full Kits
Loading...
£2,798.31
£3,231.11
£2,798.31
£3,448.11
£3,231.11
Loading...
£3,559.58
£3,508.58
£2,798.31
£3,231.11
Loading...
£3,960.58
£3,610.58
£3,610.58
£3,460.58
£3,610.58
£3,448.11
£3,460.58
Loading...
£1,287.58
£1,019.18
£1,543.99
£2,086.26
£2,408.61
£2,036.61
£1,287.58
£1,019.18
£1,543.99
£2,086.26