Large Rigid Solar Charging Kits 80W-160W

These high efficiency, waterproof 12V monocrystalline solar panel kits are perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. They can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps)

Build Your Own Give Us A Call

25 Products Found

£290.99

Victron 185W Monocrystalline Solar panel kit with SmartSolar MPPT, Cables & MC4

185W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats Panel sizes are 1485x668x30mm This 185w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron Smartsolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit with Victron 185W Monocrystalline panel, optional plastic or aluminium mounting brackets, Cable entry Gland, Victron 75/15 Smartsolar MPPT charge controller, 10m of Black PV Cable (2 x 5m) & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cables with In-Line Fuse. Mounts Optional: 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets Ideal for charging battery banks up to 250ah This highly efficient Victron solar 185w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Solar Panel Specifications Watts 185 Maximum Power Voltage - Vmpp(V) 19.68 Maximum Power Current - Impp(A) 9.41 Open Circuit Voltage - Voc(V) 24.11 Short Circuit Current - Isc (A) 9.91 Height (mm) 1485 Width (mm) 668 Thickness (mm) 30 Weight (KG) 11 Cell Type Mono Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£339.98

110Ah Leisure Battery, 185W Solar Panel Kit with Charge Controller, Cable and Brackets

Package consists of 1x XV110, 1x SCC075015060R, 1x SPM041851200, 1x SCA000500000 & 1x RNG-MTS-ZB & 1 x Roof GlandTitanium XV110 Leisure BatteryThis heavy duty deep cycle battery is designed to meet the needs of leisure and marine vehicles. With its sealed calcium construction which makes it 100% maintenance free this battery is fast becoming a favourite within the industry.This range is suited to seasonal use such as Caravans Motorhomes Boats RV Camping and much more.The product is supplied charged and ready to fit.Features• Excellent design handle – Easy battery replacement• Integrated computer designed and reinforced container – Protection from vibrations and impact• Sealed covers – Prevents acid leaks and minimizes gassing• Totally sealed and spill proof• Maintenance Free – no topping up required• Glass fibre separators• Safety venting system• Sealed water recombination system• Tough polypropylene case designVictron Energy SmartSolar MPPT 75/15A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.MPPT: Ultra Fast Maximum Power Point TrackingBy constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.Bluetooth Smart built-inThe wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.VE.DirectFor a wired data connection to a Color Control GX, other GX products, PC or other devicesBattery Life: intelligent battery managementWhen a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.Internal temperature sensorCompensates absorption and float charge voltage for temperature.Victron Energy Mono Solar Panel 12V 185W• Low voltage-temperature coefficient enhances high-temperature operation.• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.• 25-Year limited warranty on power output and performance.• 5-Year limited warranty on materials and workmanship.• Sealed, waterproof, multi-functional junction box gives high level of safety.• High performance bypass diodes minimize the power drop caused by shade.• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.• A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.• Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.• High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Solar Panel Mounting Z Bracket – Set of 4 The Z-Bracket Mount System is designed to support the installation of single solar panel units; generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as an attachment to a user-made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy; affordable and quick. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

Out of Stock

£299.99

110Ah Leisure Battery, 115W Solar Panel Kit with Charge Controller, Cable and Brackets

Package consists of 1x XV110 (Titanium), 1x SCC075010060R, 1x SPM041151202, 1x Z Bracket & 1 x 5QM40 & 1 x Roof Gland Titanium XV110 Dual Purpose Leisure Battery This heavy duty deep cycle battery is designed to meet the needs of leisure and marine vehicles. With its sealed calcium construction which makes it 100% maintenance free this battery is fast becoming a favourite within the industry. This range is suited to seasonal use such as Caravans Motorhomes Boats RV Camping and much more. The product is supplied charged and ready to fit. Features Excellent design handle – Easy battery replacement Integrated computer designed and reinforced container – Protection from vibrations and impact Sealed covers – Prevents acid leaks and minimizes gassing Totally sealed and spill proof Maintenance Free – no topping up required Glass fibre separators Safety venting system Sealed water recombination system Tough polypropylene case design Victron Energy SmartSolar MPPT 75/10 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on our website for details Day/night timing and light dimming option See the software section on Victron for details Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. Victron Energy Solar Panel 12V 115W Mono series 4a Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Victron Energy Solarcable L=5m/4sqmm MC4-M/F 5m/4spmm MC4-M/F of Solarcable Z Bracket Mounting Aluminium Fixing Set These brackets are made from 2mm aluminium Included: 4x Z-Shape Tabbed Solar Panel Brackets 8x Stainless Steel Self Tapping Screws 4x Stainless Steel Spring Washers 4x Stainless Steel Short Bolts 4x Stainless Steel Washers 4x Stainless Steel Nuts Brand Titanium & Victron Energy Manufacturer Part Number XV110 (Titanium), SCC075010060R, SPM041151202, SCA000500000 and Z Bracket Battery Voltage 12V Battery Capacity (C20) 110Ah Battery Cold Cranking 800CCA Terminal Type A, Standard Automotive Terminal Layout Right Hand Positive Battery Dimensions (Including Terminals) L354 x W174 x H190mm Battery Weight 23.8Kg Battery Warranty 4 Years Battery Technology Sealed Calcium Battery Application Deep Cycle MPPT Voltage 12/24V Rated Charge Current 10A Nominal PV Power, 12V 145W Max. PV Short Circuit Current 15A Max. PV Open Circuit Voltage 75V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes MPPT Dimensions H100 x W113 x D40mm MPPT Weight 0.5Kg MPPT Warranty 5 Years MPPT Country of Manufacture India Solar Panel Voltage 12V Nominal Power 115W Cell Type Monocrystalline Maximum System Voltage 1000V Solar Panel Dimensions L1015 x W668 x D30mm Solar Panel Weight 8Kg Solar Panel Warranty 5 Years Solar Panel Country of Manufacture China Cable Length 5m Cable Thickness 4sqmm Cable Country of Manufacture China Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£138.99

100W 12V Solar Charging Kit With 10A Controller And 5M Cable

This kit includes:100W monocrystalline solar panel with 5m of solar cable and MC4 connectorsAdvanced 10A Photonic Universe solar charge controller 100W solar panel:The waterproof high efficiency Photonic Universe 100W monocrystalline solar panel included in this kit is perfect for permanent outdoor use to provide free electricity to charge a 12V battery to power hundreds of devices and electrical appliances.The long-lasting monocrystalline solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.The panel comes with 5m of special solar cable which can operate at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of the cable for easy connection to to other solar panels or 4mm extension cable. The MC4 connectors can also be cut off when wiring to the screw terminals of the 10A solar charge controller.Each individual solar panel is thoroughly tested to the highest quality standards, and labelled with a unique serial number for further quality control and increased warranty protection.10A solar charge controller:The kit includes a 10A Photonic Universe solar charge controller designed to protect batteries whilst charging them, having automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This solar controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below)The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. The controller is not waterproof and should be used indoors.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 100WMaximum power voltage: 19.3VMaximum power current: 5.18AOpen circuit voltage: 22.9VShort circuit current: 5.56APower allowance range: 0~+3%Dimensions: 1200 x 540 x 35 mmWeight: 8.5 kg4 mounting holes2 x 5m of high quality single core solar cable (4.0mm² cross section) with MC4 connectors attached Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty

...Read more View Product

£291.99

110Ah Leisure Battery, 90W Solar Panel Kit with Charge Controller, Cable and Brackets

Package consists of 1x XV110 (Titanium), 1x SCC075010060R, 1x SPM040901200, 1x SCA000500000 & 1x Z Bracket & 1 x Roof Gland Titanium XV110 Dual Purpose Leisure Battery This heavy duty deep cycle battery is designed to meet the needs of leisure and marine vehicles. With its sealed calcium construction which makes it 100% maintenance free this battery is fast becoming a favourite within the industry. This range is suited to seasonal use such as Caravans Motorhomes Boats RV Camping and much more. The product is supplied charged and ready to fit. Features Excellent design handle – Easy battery replacement Integrated computer designed and reinforced container – Protection from vibrations and impact Sealed covers – Prevents acid leaks and minimizes gassing Totally sealed and spill proof Maintenance Free – no topping up required Glass fibre separators Safety venting system Sealed water recombination system Tough polypropylene case design Victron Energy SmartSolar MPPT 75/10 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on our website for details Day/night timing and light dimming option See the software section on Victron for details Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. Victron Energy Solar Panel 12V 90W Mono series 4a Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Victron Energy Solarcable L=5m/4sqmm MC4-M/F 5m/4spmm MC4-M/F of Solarcable Z Bracket Mounting Aluminium Fixing Set These brackets are made from 2mm aluminium Included: 4x Z-Shape Tabbed Solar Panel Brackets 8x Stainless Steel Self Tapping Screws 4x Stainless Steel Spring Washers 4x Stainless Steel Short Bolts 4x Stainless Steel Washers 4x Stainless Steel Nuts Brand Titanium & Victron Energy Manufacturer Part Number XV110 (Titanium), SCC075010060R, SPM040901200, SCA000500000 and Z Bracket Battery Voltage 12V Battery Capacity (C20) 110Ah Battery Cold Cranking 800CCA Terminal Type A, Standard Automotive Terminal Layout Right Hand Positive Battery Dimensions (Including Terminals) L354 x W174 x H190mm Battery Weight 23.8Kg Battery Warranty 4 Years Battery Technology Sealed Calcium Battery Application Dual Purpose MPPT Voltage 12/24V Rated Charge Current 10A Nominal PV Power, 12V 145W Max. PV Short Circuit Current 13A Max. PV Open Circuit Voltage 75V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% MPPT Dimensions H100 x W113 x D40mm MPPT Weight 0.5Kg MPPT Warranty 5 Years MPPT Country of Manufacture India Solar Panel Voltage 12V Nominal Power 90W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Solar Panel Dimensions L780 x W668 x D30mm Solar Panel Weight 6.1Kg Solar Panel Warranty 5 Years Solar Panel Country of Manufacture China Cable Length 5m Cable Thickness 4sqmm Cable Country of Manufacture China

...Read more View Product

£119.99

200W Monocrystalline Solar Panel with 90cm cable

This high-efficiency, waterproof 200W monocrystalline solar panel is an ideal energy solution for customers who seek reliable, renewable power for their camper vans and adventure vehicles. Designed for permanent outdoor installation, it effortlessly provides free electricity to charge 12V batteries, powering various essentials including lighting, refrigeration, electronics, and more. Whether you're customizing your van for off-grid living, weekend getaways, or extended road trips, this solar panel is also versatile enough to support additional applications such as motorhomes, boats, off-grid cabins, farms, or remote setups requiring power for telecommunications and monitoring equipment. The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions. This panel also features innovative multi-busbar solar cells, which are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. Solar panel specifications: Peak power: 200W Maximum power voltage: 17.49V Maximum power current: 11.44A Open circuit voltage: 21.12V Short circuit current: 12.24A Power allowance range: +/- 3% Dimensions: 1038 x 992 x 30mm Weight: 10.5 kg 8 mounting holes 2 x 90cm of high quality single core solar cable (4.0mm cross section) Male and female MC4 connectors

...Read more View Product

£325.49

Victron 185W Mono Solar Panel Kit with SmartSolar MPPT 75/15, Solar cable and Mounts

This 185w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency.This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. Victron Energy Solar Panel 12V 185W Mono series 4a Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Victron Energy SmartSolar MPPT 75V 15A A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on our website for details Day/night timing and light dimming option See the software section on Victron for details Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. Victron Energy Solarcable L=5m/4sqmm MC4-M/F 5m/4spmm MC4-M/F of Solarcable Z Bracket Mounting Aluminium Fixing Set These brackets are made from 2mm aluminium Included: 4x Z-Shape Tabbed Solar Panel Brackets 8x Stainless Steel Self Tapping Screws 4x Stainless Steel Spring Washers 4x Stainless Steel Short Bolts 4x Stainless Steel Washers 4x Stainless Steel Nuts Brand Victron Energy Manufacturer Part Number SPM041851200, SCC075015060R, 2x SCA000500000 and Z Bracket Solar Panel Voltage 12V Nominal Power 175W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Solar Panel Dimensions L1485 x W668 x D30mm Solar Panel Weight 11Kg Solar Panel Country of Manufacture China MPPT Voltage 12/24V Rated Charge Current 15A Nominal PV Power, 12V 220W Max. PV Short Circuit Current 15A Max. PV Open Circuit Voltage 75V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes MPPT Dimensions H100 x W113 x D40mm MPPT Weight 0.5Kg MPPT Country of Manufacture India Cable Length 5m Cable Thickness 4sqmm Cable Country of Manufacture China Warranty 5 Years Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£290.99

Victron 130W Monocrystalline Solar panel kit with SmartSolar MPPT, Cables & MC4

130W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats Panel sizes are 1200x668x30mm This 130w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron Smartsolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit with Victron 130W Monocrystalline panel, optional plastic or aluminium mounting brackets, Cable entry Gland, Victron 75/15 Smartsolar MPPT charge controller, 10m of Black PV Cable (2 x 5m) & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cables with In-Line Fuse. Mounts Optional: 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets Ideal for charging battery banks up to 250ah This highly efficient Victron solar 130w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£494.99

Victron 185W Mono Solar panel kit with SmartSolar MPPT, AGM Battery & Accessories

185W Victron Energy Solar Panel Kit with 100ah AGM Battery and all Accessories Panel sizes are 1485x668x30mm This 185w Solar Panel Kit with 95ah AGM Battery and accessories is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit Including: Victron 185W Monocrystalline panelPlastic corner fixing brackets or Aluminium Z BracketsCable entry Gland, Victron SmartSolar Bluetooth enabled 75/15 MPPT5m of Black PV Cable & MC4 Connectors x 2Resettable Circuit BreakerFused Battery Cable100ah AGM BatteryVictron Battery Isolator Switch This highly efficient Victron solar 185w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging of the battery. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

Out of Stock

£363.99

Victron 150W Monocrystalline Solar panel kit with BlueSolar MPPT, Mounts, Cables & MC4

150W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats Panel sizes are 112 x 67 x 3.5 cm This 150w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron BlueSolar MPPT 75/10 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit with Victron 150W Monocrystalline panel, plastic or alumminum mounting brackets, Cable entry Gland, Victron BlueSolar 75/10 MPPT charge controller, 10m of Black PV Cable & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cables with In-Line Fuse. Mounts available: 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets Ideal for charging battery banks up to 250ah This highly efficient Victron solar 150w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£855.99

370W Mono Solar panel kit with SmartSolar MPPT, AGM Batteries & Accessories

370W Victron Energy Solar Panel Kit with 200ah AGM Batteries and all Accessories Panel sizes are 1485x668x30mm This large 370w Rigid Solar Panel Kit with 190ah AGM Batteries and all accessories is designed for off-grid, campervans, motorhomes, and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and battery charging efficiency. The ETFE covering makes the solar panel extremely durable and resistant. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit Including: Victron 185W Monocrystalline panels x 2Plastic corner fixing brackets x2 or Aluminium Z Brackets x 8Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/20 MPPT5m of Black PV Cable & MC4 Connectors x2Resettable Circuit Breaker 50ampFused Battery Cable100ah AGM Battery x 2Victron Battery Isolator Switch25mm Battery cable 2m (Red & Black) x 2 This highly efficient Victron solar 370w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging of the battery. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£389.99

330W Sharp Nu-Jc Monocrystalline Solar Panel With High-Efficiency Perc Cells SRP-330M

Van Junkies are proud to present this high-quality 330W solar panel from leading solar manufacturer Sharp, who have over 60 years of experience with solar technology and over 50 million solar panels installed all over the world. This MCS certified panel is perfect for a wide variety of applications, from grid-tie household systems to off-grid installations where mains power is limited or unavailable such as boats, caravans, campervans, cabins or glamping huts. These high-power panels are ideal for large systems where the time and expense of fitting a high Wattage array needs to be minimised. High efficiency solar cells use PERC technology with 5 busbars to extract more power from a smaller surface area, increasing the output of the panel without increasing the size. Half-cut cell construction decreases internal losses, reduces risk of hotspots and improves performance in shaded conditions. The robust design of the panel is IP68 (waterproof) rated, and tested for resistance against PID, salt mist, ammonia, heavy snow, dust and sand. This thorough testing ensures a long service life even in harsh marine or wilderness conditions. A pair of male / female MC4 connectors are crimped on the end of the cable for easy waterproof connection to other solar panels, extension leads or your existing system. With a 15-year workmanship guarantee and 25-year output guarantee, you can be confident in the quality, durability and longevity of this premium solar panel. Specifications: Peak power: 330W Maximum power voltage: 34.27V Maximum power current: 9.63A Open circuit voltage: 41.32V Short circuit current: 10.35A Power tolerance: 0/+5% Dimensions: 1,684 x 1002 x 40 mm Weight: 19.5 kg Mounting holes for ease of installation 2x 1.2m of high-quality single core solar cable Male and female MC4 waterproof connectors The product is covered by a 15 year workmanship warranty provided by Sharp Electronics. In addition, solar cells are guaranteed to produce at least 97.5% of nominal power in the first year after purchase and less than 0.7% degradation of nominal power each year after until 25 years after purchase, for a minimim of 80.7%.

...Read more View Product

£303.99

Victron 100W Monocrystalline Solar panel kit with BlueSolar MPPT, Mounts, Cables & MC4

100W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats Panel sizes are 845 x 670 x 30mm This 100w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron BlueSolar MPPT 75/10 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit with Victron 100W Monocrystalline panel, plastic or aluminum mounting brackets, Cable entry Gland, Victron BlueSolar 75/10 MPPT charge controller, 10m of Black PV Cable & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cables with In-Line Fuse. Mounts available: 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets Ideal for charging battery banks up to 250ah This highly efficient Victron solar 100w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

Out of Stock

£703.99

250W Mono Solar panel kit with SmartSolar MPPT, AGM Battery & Accessories

250W Victron Energy Solar Panel Kit with 100ah AGM Battery and all Accessories Panel size: 139 x 99 x 4 cm This highly efficient, 250W monocrystalline solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps). Low voltage-temperature coefficient enhances high-temperature operation. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 5m pre-wired quick-connect system with MC4 (PV-ST01) connectors Full Kit Including: Victron 250W Monocrystalline panelPlastic corner fixing brackets or Aluminium Z BracketsCable entry Gland, Victron SmartSolar Bluetooth enabled 75/15 MPPT5m of Black PV Cable & MC4 Connectors x 2Resettable Circuit BreakerFused Battery Cable100ah AGM BatteryVictron Battery Isolator Switch This highly efficient Victron solar 250w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. A waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging of the battery. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£169.99

80W (40W+40W) Solar Charging Kit With 10A Controller And 2 X 5M Cables (German Solar Cells)

we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in these solar panels. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This kit includes:2 x 40W high efficiency waterproof monocrystalline solar panels, each with 5m cable and MC4 connectors10A Photonic Universe solar charge controller 2 x 40W solar panels:This 80W system is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).Each panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panels can be used in all weather conditions.These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Specifications (per solar panel):Peak power: 40WMaximum power voltage: 20.2VMaximum power current: 1.98AOpen circuit voltage: 23.9VShort circuit current: 2.10APower allowance range: +/- 3%Dimensions: 705 x 345 x 25mmWeight: 3.5 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty Wiring guide for Solar Panel Kits in Series

...Read more View Product

Out of Stock

£203.99

160W 12V Solar Charging Kit With 20A Controller And 5M Cable

This kit includes:160W monocrystalline solar panel with 5m of solar cable and MC4 connectorsAdvanced 20A Photonic Universe solar charge controller 160W solar panel:The waterproof, high efficiency Photonic Universe 160W monocrystalline solar panel included in this kit is perfect for permanent outdoor use to provide free electricity to charge a 12V battery to power hundreds of devices and electrical appliances.The long-lasting monocrystalline solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.The panel comes with 5m of special solar cable which can operate at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of the cable for easy connection to the 20A solar charge controller(MC4 connectors can also be cut off when wiring to screw terminals of a solar charge controller).Each individual solar panel is thoroughly tested to the highest quality standards, and labelled with a unique serial number for further quality control and increased warranty protection.20A solar charge controller:The kit includes a 20A Photonic Universe solar charge controller designed to protect batteries whilst charging them, having automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This solar controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 20A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below)The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. The controller is not waterproof and should be used indoors.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 160WMaximum power voltage: 18.8VMaximum power current: 8.48AOpen circuit voltage: 22.9VShort circuit current: 9.02APower allowance range: 0~+3%Dimensions: 1480 x 670 x 35 mmWeight: 12 kg4 mounting holes5m of special solar cable with MC4 connectors attached Charge controller specifications:Rated current 20AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 10mm2Size: 15.9 x 8.1 x 4.8 cmWeight: 300 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty provided by Photonic Universe (including a 1 year warranty for the solar charge controller and a 1 year workmanship warranty for the solar panel). We will repair or replace defective items at our discretion. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.

£288.99

160W Solar Charging Kit With 20A Charge Controller With Lcd Display And Cables, German Solar Cells

we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in these solar panels. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This kit includes:2 x 80W high efficiency waterproof monocrystalline solar panels, each with 5m cable and MC4 connectorsAdvanced 20A solar charge controller with LCD display and powerful 2.4A dual USB output 2 x 80W solar panels:This 160W system is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).Each panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panels can be used in all weather conditions.These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Advanced 20A solar charge controller:The kit includes a 20A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc.The LCD display shows information regarding real time solar panel and battery performance, including: voltage, current, battery state of charge, and battery temperature. An energy statistics counter also displays the accumulated daily and monthly charge values (useful for comparing solar panel performance between different periods).This solar charge controller also offers the rare and highly sought-after feature of a dual USB charging output. These 5V USB ports have a total combined output of 2.4A, offering fast and powerful charging of USB compatible devices such as mobile phones, tablets, mp3 players etc.An optional programmable load (e.g. 12V lighting / fans / water pumps) may also be connected directly to the solar charge controller. Using the buttons and LCD display, the user can set personalised On/Off timers for these appliances. In addition, this controller also offers various charging programs for different battery types, which can be easily selected by the user. In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Specifications (per solar panel):Peak power: 80WMaximum power voltage: 20.2VMaximum power current: 3.96AOpen circuit voltage: 23.9VShort circuit current: 4.21APower allowance range: +/- 3%Dimensions: 700 x 670 x 30 mmWeight: 6 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors attached Charge controller specifications:Fully automated operation and auto 12/24V selectionRated charge/discharge current: 20AMaximum solar panel input power: 320W (12V) / 640W (24V)Maximum solar panel input voltage 50VTemperature sensor for automatic compensation: -3mV/C/2V (25C)Working temperature: -25ºC to +55ºCSelf-consumption: max. ≤9.2mA (12V); ≤11.7mA (24V)3 pairs of terminals (solar, battery, optional load)Terminals for wire up to 10mm2Multiple mounting holes for ease of installationSize: 16 x 9.5 x 5 cmWeight: 350 g Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty Wiring guide for Solar Panel Kits in Series

...Read more View Product

£248.99

160W (80W+80W) Solar Charging Kit With 20A Controller And 2 X 5M Cables (German Solar Cells)

We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in these solar panels. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This kit includes:2 x 80W high efficiency waterproof monocrystalline solar panels, each with 5m cable and MC4 connectors20A Photonic Universe solar charge controller 2 x 80W solar panels:This 160W system is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).Each panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panels can be used in all weather conditions.These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.20A Solar charge controller:This kit includes a powerful 20A 12V/24V solar charge controller, which is designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 20A controller is the small size - only 16 x 8cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can handle up to 320W of solar power (12V system) or 640W of solar power (24V system), so the kit can be upgraded to increase the power output by adding more solar panels, without the need to buy a new controller.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Specifications (per solar panel):Peak power: 80WMaximum power voltage: 20.2VMaximum power current: 3.96AOpen circuit voltage: 23.9VShort circuit current: 4.21APower allowance range: +/- 3%Dimensions: 700 x 670 x 30 mmWeight: 6 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors attached Charge controller specifications:Rated current 20AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 10mm2Size: 15.9 x 8.1 x 4.8 cmWeight: 300 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty Wiring guide for Solar Panel Kits in Series

...Read more View Product

Out of Stock

£278.99

150W 12V Solar Charging Kit (German Solar Cells) With 10A Controller, Mounting Brackets And Cables

This high efficiency 150W 12V charging kit is perfect for permanent outdoor use to provide free electricity for charging a 12V battery to power various devices for many applications such as in a camper van, boat, shed or farm.This is a complete 150W solar charging kit which includes:High efficiency 150W monocrystalline solar panel with 5m of special solar cable and waterproof connectors10A automatic solar charge controller with advanced connectivity optionsSet of 4 corner plastic brackets for bonding to the roofSet of 2 side plastic brackets for stronger supportWaterproof double entry cable gland5m of 4mm² dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminalsPair of waterproof MC4 connectors for easy connectivityUser manual with detailed installation instructions 150W solar panel:At Photonic Universe we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V solar panel charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14 x 7cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load; such as in a campervan or boat.This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:This kit includes a set of 4 plastic corner mounting brackets and 2 side mounting brackets for fixing the solar panel to the roof. The brackets can be bonded to the roof using an appropriate sealant (not included). The waterproof double cable entry gland included with the kit is perfect for getting cables from outside to inside and keeping the place fully waterproof. The kit also includes 5m dual core battery cable with a 15A fuse, fuse holder and 8mm ring terminals and a pair of MC4 connectors.Solar panel specifications:Peak power: 150WMaximum power voltage: 20.2VMaximum power current: 7.43AOpen circuit voltage: 23.9VShort circuit current: 7.89APower allowance range: +/- 3%Dimensions: 124 x 67 x 3.5 cmWeight: 9.9 kg4 mounting holes 9 x 14 mm2 x 5m of high quality single core solar cable 4.0mm cross sectionMale and female MC4 connectors Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wires up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Corner brackets specifications: Material: plastic Colour: white Size: each corner bracket 15 x 15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Weight: (4 brackets): 1.6kg Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty

Out of Stock

£228.99

150W 12V Solar Charging Kit With 10A Controller And 5M Cable (German Solar Cells)

We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.150W solar panel:This high efficiency, waterproof 150W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of the solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 150WMaximum power voltage: 20.2VMaximum power current: 7.43AOpen circuit voltage: 23.9VShort circuit current: 7.89APower allowance range: +/- 3%Dimensions: 124 x 67 x 3.5 cmWeight: 9.9 kg4 mounting holes 9 x 14 mm2 x 5m of high quality single core solar cable 4.0mm cross sectionMale and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty

£245.99

120W 12V Solar Charging Kit (German Solar Cells) With 10A Controller, Mounting Brackets And Cables

This high efficiency 120W 12V charging kit is perfect for permanent outdoor use to provide free electricity for charging a 12V battery to power various devices for many applications such as in a camper van, boat, shed or farm.This is a complete 120W solar charging kit which includes:High efficiency 120W monocrystalline solar panel with 5m of special solar cable and waterproof connectors10A automatic solar charge controller with advanced connectivity optionsSet of 4 corner plastic brackets for bonding to the roofSet of 2 side plastic brackets for stronger supportWaterproof double entry cable gland5m of 4mm² dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminalsPair of waterproof MC4 connectors for easy connectivityUser manual with detailed installation instructions 120W solar panel:At Photonic Universe we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V solar panel charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14 x 7cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load; such as in a campervan or boat.This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:This kit includes a set of 4 plastic corner mounting brackets and 2 side mounting brackets for fixing the solar panel to the roof. The brackets can be bonded to the roof using an appropriate sealant (not included). The waterproof double cable entry gland included with the kit is perfect for getting cables from outside to inside and keeping the place fully waterproof. The kit also includes 5m dual core battery cable with a 15A fuse, fuse holder and 8mm ring terminals and a pair of MC4 connectors.Solar panel specifications:Peak power: 120WMaximum power voltage: 20.2VMaximum power current: 5.94AOpen circuit voltage: 23.9VShort circuit current: 6.31APower allowance range: +/- 3%Dimensions: 100.5 x 67 x 3.5 cmWeight: 8.3 kg4 mounting holes 9 x 14 mm2 x 5m of high quality single core solar cable 4.0mm cross sectionMale and female MC4 connectors Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wires up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Corner brackets specifications: Material: plastic Colour: white Size: each corner bracket 15 x 15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cm Weight: (4 brackets): 1.6kg Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty (including a 1 year warranty for the solar charge controller, and 1 year workmanship warranty for the solar panel). For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells

...Read more View Product

£183.99

120W 12V Solar Charging Kit With 10A Controller And 5M Cable (German Solar Cells)

we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.120W solar panel:This high efficiency, waterproof 120W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 120WMaximum power voltage: 20.2VMaximum power current: 5.94AOpen circuit voltage: 23.9VShort circuit current: 6.31APower allowance range: +/- 3%Dimensions: 100.5 x 67 x 3.5 cmWeight: 8.3 kg4 mounting holes 9 x 14 mm2 x 5m of high quality single core solar cable 4.0mm cross sectionMale and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty

...Read more View Product

£189.99

100W (50W+50W) Solar Charging Kit With 10A Controller And 2 X 5M Cables (German Solar Cells)

we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in these solar panels. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This kit includes:2 x 50W high efficiency waterproof monocrystalline solar panels, each with 5m cable and MC4 connectors10A Photonic Universe solar charge controller 2 x 50W solar panels:This 100W system is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).Each panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panels can be used in all weather conditions.These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Specifications (per solar panel):Peak power: 50WMaximum power voltage: 20.2VMaximum power current: 2.48AOpen circuit voltage: 23.9VShort circuit current: 2.63APower allowance range: +/- 3%Dimensions: 590 x 505 x 25mmWeight: 4.2 kg4 mounting holes 6 x 9 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty Wiring guide for Solar Panel Kits in Series

...Read more View Product

£174.99

100W 12V Solar Charging Kit With 10A Controller And 5M Cable (German Solar Cells)

We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.100W solar panel:This high efficiency, waterproof 100W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately. Solar panel specifications: Peak power: 100W Maximum power voltage: 20.2V Maximum power current: 4.95A Open circuit voltage: 23.9V Short circuit current: 5.26A Power allowance range: +/- 3% Dimensions: 845 x 670 x 30mm Weight: 7kg 4 mounting holes 9 x 11 mm 2 x 5m of high quality single core solar cable 4.0mm cross section Male and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications: Rated current 10A Fully automated operation and auto 12/24V selection Wide solar input voltage range up to 50V 3 pairs of terminals (input, battery, output) LEDs to indicate charging, battery and load Temperature sensor for automatic compensation (-3mV/°C/2V) Over load protection (≥1.05 times the rated discharge current) Short circuit protection (≥2 times the rated discharge current) Over charge / discharge, overheating and other protection features Self-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V) Working temperature: -35C to +50C Terminals for wire up to 4mm2 Size: 13.8 x 6.9 x 3.7 cm Weight: 130 g Multiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package. This product is covered by a 1 year warranty

...Read more View Product

£178.99

80W 12V Solar Charging Kit (German Solar Cells) With 10A Controller, Mounting Brackets And Cable

This high efficiency 80W 12V charging kit is perfect for permanent outdoor use to provide free electricity for charging a 12V battery to power various devices for many applications such as in a camper van, boat, shed or farm.This is a complete 80W solar charging kit which includes:High efficiency 80W monocrystalline solar panel with 5m of special solar cable and waterproof connectors10A automatic solar charge controller with advanced connectivity optionsSet of 4 corner plastic brackets for bonding to the roofWaterproof double entry cable gland5m of 2.5mm² dual core battery cable fitted with a 10A fuse, fuse holder and 8mm ring terminalsPair of waterproof MC4 connectors for easy connectivityUser manual with detailed installation instructions 80W solar panel:At Photonic Universe we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V solar panel charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14 x 7cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load; such as in a campervan or boat.This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:This kit includes a set of 4 plastic corner mounting brackets for fixing the solar panel to the roof. The brackets can be bonded to the roof using an appropriate sealant (not included). The waterproof double cable entry gland included with the kit is perfect for getting cables from outside to inside and keeping the place fully waterproof. The kit also includes 5m dual core battery cable with a 10A fuse, fuse holder and 8mm ring terminals and a pair of MC4 connectors.Solar panel specifications:Peak power: 80WMaximum power voltage: 20.2VMaximum power current: 3.96AOpen circuit voltage: 23.9VShort circuit current: 4.21APower allowance range: +/- 3%Dimensions: 700 x 670 x 30 mmWeight: 6 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wires up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Corner brackets specifications: Material: plastic Colour: white Size (1 bracket): 15x15x6.5cm Weight: (4 brackets): 1.6kg Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty

...Read more View Product

0 Kits Selected✕

Recommended Full Kits

£2,798.31

1600W Inv

450W Solar

460Ah Batt

50Amp DC

1600 MP - 450w OR50 460ah

Power

Battery

Solar

Off-Grid

View Product

£3,231.11

2000W Inv

450W Solar

460Ah Batt

50Amp DC

2000 MP - 450w OR50 460ah

Power

Battery

Solar

Off-Grid

View Product

£2,798.31

1600W Inv

450W Solar

460Ah Batt

50Amp DC

1600 MP - 450w OR50 460ah

Power

Battery

Solar

Off-Grid

View Product

£3,448.11

2000W Inv

555W Solar

460Ah Batt

50Amp DC

2000 MP - 555w OR50 460ah

Power

Battery

Solar

Off-Grid

View Product

£3,231.11

2000W Inv

450W Solar

460Ah Batt

50Amp DC

2000 MP - 450w OR50 460ah

Power

Battery

Solar

Off-Grid

View Product

£3,559.58

3000W Inv

390W Solar

460Ah Batt

50Amp DC

3000 MP - 390w OR50 460ah

Power

Battery

Solar

Off-Grid

View Product

£3,508.58

3000W Inv

370W Solar

460Ah Batt

50Amp DC

3000 MP - 370w OR50 460ah

Power

Battery

Solar

Off-Grid

View Product

£2,798.31

1600W Inv

450W Solar

460Ah Batt

50Amp DC

1600 MP - 450w OR50 460ah

Power

Battery

Solar

Off-Grid

View Product

£3,231.11

2000W Inv

450W Solar

460Ah Batt

50Amp DC

2000 MP - 450w OR50 460ah

Power

Battery

Solar

Off-Grid

View Product

£2,521.14

0W Inv

0W Solar

12Ah Batt

50Amp DC

No Inverter - 350w flex OR50 460ah shunt IP22

Power

Battery

Solar

Off-Grid

View Product

£2,177.15

0W Inv

0W Solar

12Ah Batt

No Inverter - 350w flex 460ah shunt IP22

Power

Battery

Solar

Off-Grid

View Product

£2,040.20

0W Inv

390W Solar

460Ah Batt

50Amp DC

No Inverter - 390w OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£2,207.20

0W Inv

350W Solar

460Ah Batt

50Amp DC

No Inverter - 350w flex OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£3,960.58

3000W Inv

900W Solar

628Ah Batt

50Amp DC

3000 MP - 900w OR50 628ah

Power

Battery

Solar

Off-Grid

View Product

£3,610.58

3000W Inv

450W Solar

628Ah Batt

50Amp DC

3000 MP - 450w OR50 628ah

Power

Battery

Solar

Off-Grid

View Product

£3,610.58

3000W Inv

450W Solar

628Ah Batt

50Amp DC

3000 MP - 450w OR50 628ah

Power

Battery

Solar

Off-Grid

View Product

£3,460.58

3000W Inv

450W Solar

460Ah Batt

50Amp DC

3000 MP - 450w OR50 460ah

Power

Battery

Solar

Off-Grid

View Product

£3,833.57

3000W Inv

350W Solar

460Ah Batt

50Amp DC

3000 MP - 350w flex OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£3,610.58

3000W Inv

450W Solar

628Ah Batt

50Amp DC

3000 MP - 450w OR50 628ah

Power

Battery

Solar

Off-Grid

View Product

£3,448.11

2000W Inv

555W Solar

460Ah Batt

50Amp DC

2000 MP - 555w OR50 460ah

Power

Battery

Solar

Off-Grid

View Product

£3,460.58

3000W Inv

450W Solar

460Ah Batt

50Amp DC

3000 MP - 450w OR50 460ah

Power

Battery

Solar

Off-Grid

View Product

£1,287.58

0W Inv

0W Solar

160Ah Batt

30Amp DC

No Inverter - 185w OR30 160ah

Power

Battery

Solar

Off-Grid

View Product

£1,019.18

0W Inv

0W Solar

160Ah Batt

No Inverter - 160ah IP22

Power

Battery

Solar

Off-Grid

View Product

£1,543.99

500W Inv

185W Solar

160Ah Batt

30Amp DC

500 PHX - 185w OR30 160ah

Power

Battery

Solar

Off-Grid

View Product

£2,086.26

1200W Inv

185W Solar

160Ah Batt

30Amp DC

1200 MP - 185w OR30 160ah

Power

Battery

Solar

Off-Grid

View Product

£2,408.61

12W Inv

0W Solar

12Ah Batt

500 MP - 350w flex 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£2,036.61

12W Inv

0W Solar

12Ah Batt

50Amp DC

500 MP - OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£1,287.58

0W Inv

0W Solar

160Ah Batt

30Amp DC

No Inverter - 185w OR30 160ah

Power

Battery

Solar

Off-Grid

View Product

£1,019.18

0W Inv

0W Solar

160Ah Batt

No Inverter - 160ah IP22

Power

Battery

Solar

Off-Grid

View Product

£1,543.99

500W Inv

185W Solar

160Ah Batt

30Amp DC

500 PHX - 185w OR30 160ah

Power

Battery

Solar

Off-Grid

View Product

£2,086.26

1200W Inv

185W Solar

160Ah Batt

30Amp DC

1200 MP - 185w OR30 160ah

Power

Battery

Solar

Off-Grid

View Product

Build Your Own Give Us A Call

Full Power System Kits

Shop By Application

Electrical Components

Power Banks

Victron Energy

Usage Styles

shop by application

shop electrical parts

Shop Power Banks

Shop Victron Energy

solar Panel Kits by size (w)

Solar Panel Kits by Vehicle

Solar Panel Kits by Price (£)

all solar panel kit categories

Solar Panels

solar panel cables & accessories

shop solar panel kits by size (W)

shop solar panel kits by vehicle

shop solar panel kits by price

shop all solar panel kit categories

shop solar panels by size (W)

shop solar panels by type

shop solar panel cables & accessories

Batteries

Battery Chargers

DC to DC charging

Battery & charging Accessories

Inverters

Victron Electrics

shop by battery type

shop by brand

shop by type

shop by kit

shop by type

shop by type

shop by BRAND

shop VICTRON ELECTRICS

WATER & PLUMBING

diesel heaters

Fridges & Freezers

cooking

ventilation & sky lights

Motorhomes

Motorhome Brands Power Upgrades

Full Power System Kits

Usage Styles

Shop By Application

shop by application

Electrical Components

shop electrical parts

Power Banks

Shop Power Banks

Victron Energy

Shop Victron Energy

solar Panel Kits by size (w)

shop solar panel kits by size (W)

Solar Panel Kits by Vehicle

shop solar panel kits by vehicle

Solar Panel Kits by Price (£)

shop solar panel kits by price

all solar panel kit categories

shop all solar panel kit categories

Solar Panels

shop solar panels by size (W)

shop solar panels by type

solar panel cables & accessories

shop solar panel cables & accessories

Batteries

shop by battery type

shop by brand

Battery Chargers

shop by type

DC to DC charging

shop by kit

Battery & charging Accessories

shop by type

Inverters

shop by type

shop by BRAND

Victron Electrics