Electrical

Blue Sea 5190 BS5190 Fuse Terminal 300A

MRBF Terminal Fuse - 300A BS5190 Blue Sea 5190 Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151—do not mount the fuse directly to the battery terminal Interrupt rating satisfies ABYC requirements for DC Main circuit protection on large battery banks Ignition protected—safe for installation aboard gasoline powered boats Clear window—visual indication of blown condition Colour coded for each amperage

...Read more View Product

£213.00

Victron Energy Orion-Tr Smart 12/12-30A (360W) Non-Isolated DC-DC Charger – ORI121236140

The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. PRODUCT CODE: ORI121236140 DC to DC (Battery to Battery) Wiring Diagram, Information and Help DC to DC (Battery to Battery) Wiring Diagram, Information and Help Datasheet Victron Orion Non-Isolated Datasheet Installation and Help Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here Wiring Diagram Video

...Read more View Product

£104.99

Victron Energy SmartSolar MPPT 100/30 – Solar Charge Controller - SCC110030210

Victron Energy SmartSolar MPPT 100/30 – Solar Charge Controller - SCC110030210 This Victron 100V 30A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device.Ultrafast MPPT Technology:This 30A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse current, PV reverse polarity and battery reverse polarity. The internal temperature sensor also protects the battery from overheating and will activate power derating if excessive temperatures are detected. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery, as well as 30 day performance data. The user can also specifically set the duration and voltage of each charging stage. Other features:The Victron SmartSolar MPPT 100/30 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Inbuilt bluetooth- Max solar panel voltage: 100V- Max solar panel power: 440W (12V) / 880W (24V)- Temperature sensor for automatic compensation (-16mV °C resp. -32mV °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 10mA- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 186 x 130 x 70 mm- Mounting dimensions: 175 x 75 mm- Weight: 1.3kg- 4 x mounting holes for ease of installation

...Read more View Product

£179.99

Victron Energy Blue Smart IP22 Charger 12V 30A 1 Output – BPC123047022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC123047002 GTIN 8719076052364 Voltage 12V Charge Current 30A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

Blue Sea 5189 Fuse Terminal 250A

Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151?do not mount the fuse directly to the battery terminal. Interrupt rating satisfies ABYC requirements for DC Main circuit protection on large battery banks. Ignition protected?safe for installation aboard gasoline powered boats. Clear window?visual indication of blown condition. Color coded for each amperage

...Read more View Product

£157.18

Victron Energy Blue Smart IP22 Charger 12V 20A 1 Output – BPC122042022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space. Brand Victron Energy Manufacturer Part Number BPC122042002 GTIN 8719076037439 Voltage 12V Charge Current 20A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

Blue Sea 5185 Fuse Terminal 150A

Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151?do not mount the fuse directly to the battery terminal. Interrupt rating satisfies ABYC requirements for DC Main circuit protection on large battery banks. Ignition protected?safe for installation aboard gasoline powered boats. Clear window?visual indication of blown condition. Color coded for each amperage

...Read more View Product

£125.99

Victron Energy Blue Smart IP22 Charger 12V 15A 1 Output UK – BPC121542022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC121542022 GTIN 8719076041047 Voltage 12V Charge Current 15A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£45.99

Blue Sea 5025 BS5025 Fuse Block ST Blade 6 Circuits

ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover BS5025 Blue Sea 5025 These units are not supplied with labels Consolidates branch circuits and in-line fuses Positive distribution bus with #10-32 stud Can be used for 24-hour circuits Models available with or without a cover Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems" Small Format Labels for circuit identification Tin-plated copper buses and fuse clips Accepts ring or snap fork type terminals Accepts ATO® and ATC® fast acting blade fuses Fuses sold separately

...Read more View Product

Best Seller

£159.99

Victron 18A 12V Smart Dc To Dc Automatic Multi-Stage Intelligent Battery-To-Battery Charger ORI121222120

Victron 18A 12V Smart Dc To Dc Automatic Multi-Stage Intelligent Battery-To-Battery Charger ORI121222120 The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. PRODUCT CODE: ORI121222120 DC to DC (Battery to Battery) Wiring Diagram, Information and Help Datasheet Victron Orion Isolated Datasheet Installation and Help Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here Video

...Read more View Product

£37.39

Blue Sea 2127 BS2127 MaxiBus 4x5/16 Stud Common

MaxiBus 250A BusBar - Four 5/16"-18 Studs BS2127 Blue Sea 2127 Busbars are used to consolidate multiple wires or feed multiple circuits Insert molded stainless steel studs eliminate need for securing nut and allow high torquing for excellent electrical contact Raised bus provides easy access to multiple wires on a single stud UL 94-V0 rated base material resists high heat Recessed mounting holes eliminate accidental shorts to aluminum and steel mounting surfaces

...Read more View Product

£98.99

20A 12V Intelligent Automatic Multi-Stage Mains Battery Charger

This 20A 12V automatic multi-stage mains battery charger is designed to enable safe and efficient unattended charging of a 12V battery or battery bank from a mains power source (220-240V AC). This mains charger boasts an advanced 7 stage charging process which delivers faster and more efficient charging, whilst eliminating the risk of voltage fluctuations. This unit is able to charge either a single 12V battery, or several 12V batteries connected in parallel (batteries must be the same type, capacity and age). This mains battery charger is compatible with Lead Acid batteries, including AGM, Gel and Wet cell batteries. Key features: Safe unattended charging: the unit features inbuilt safety functions (protection against DC short circuit, overheating and overcharging), which allow the charger to be left permanently connected to the battery for unattended automatic charging. Unlike many other mains chargers, the charging voltage is also free from peaks which offers smooth uninterrupted charging. Continued charging during battery use: the charger will continue to operate while energy is drawn from the battery during use. The unit will maintain the charge if the battery is already at full capacity. Boost-charging feature: this preliminary charging stage can improve battery condition and recover lost capacity from older batteries. It improves the charge delivered to the batteries, thereby increasing battery life and preventing premature battery failure. Dead battery recovery: the desulphation stage is able to break down sulphation that occurs in batteries which have been left flat for extended periods of time, returning them back to full charge. Automatic temperature control: to maintain an optimal internal temperature, the inbuilt fan is automatically enabled when a high temperature or charging current is detected. LCD Display: shows vital information regarding the charging process (charging voltage / charging current / different charging stages). LED lights also indicate the battery type. Power pack function: can provide a direct supply of power to a 12V load (e.g. 12V fridge) with no battery connected (e.g. during battery replacement). This charger is also supplied with a 1.5m mains AC cable with a UK 3-pin plug, 1 x 0.5m DC battery cable and spare fuses. Specifications: Operating Voltage range (AC): 190V - 265V (full capacity) / 50 Hz DC output current: 20A DC output voltage: 12V Suggested battery capacity: 25 - 200Ah Bulk / absorption charging voltage: 14.2V - 14.8V DC (depending on the battery type) Float charging voltage: 13.2V - 13.8V (depending on the battery type) Efficiency: <88% Operating temperature range: 0°C - 40°C Inbuilt fan Isolated DC output Dimensions: 176 x 175 x 95 mm Weight: 1.0 kg

...Read more View Product

£88.99

Victron Energy SmartSolar MPPT 100/20 – SCC110020160R

Victron Energy SmartSolar MPPT 100/20 – SCC110020160R A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on our website for details Day/night timing and light dimming option See the software section on Victron for details Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. Brand Victron Energy Manufacturer Part Number SCC110020160R GTIN 8719076043027 Voltage 12/24/48V Rated Charge Current 20A Nominal PV Power, 12V 290W Max. PV Short Circuit Current 20A Max. PV Open Circuit Voltage 100V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H100 x W113 x D60mm Weight 0.65Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

Blue Sea 5183 Fuse Terminal 100A

Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151?do not mount the fuse directly to the battery terminal. Interrupt rating satisfies ABYC requirements for DC Main circuit protection on large battery banks. Ignition protected?safe for installation aboard gasoline powered boats. Clear window?visual indication of blown condition. Color coded for each amperage

...Read more View Product

£210.75

Victron Energy Lynx Distributor – LYN060102000

A modular DC bus bar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Part of the modular Lynx distribution system. Contains a positive and negative bus-bar and provides a connection for 4 individual DC equipment circuits, loads or DC groups. It has a space for individual DC fuses per DC group. There is an optional feature of an LED for each fuse to indicate if fuse is blown. If you wish to use the fuse indication LEDs on the Lynx Distributor, it also requires a connection to a Lynx Shunt. The Lynx Shunt contains the necessary wide input (8 to 70VDC) power supply to output the required 5V (4,5V-5,5V) power requirement of the Lynx Distributor circuit board. RJ11 fly leads are used to connect the Lynx Shunt to the Distributor. This RJ11 cable is supplied with the Distributor in the box. There are two ports on the Lynx Shunt, and it is possible to use either. When all is OK, only the central LED is green; when a fuse has blown (or is missing) the central and blow fuse circuit LEDs turn red. If you are not using all connection points in your DC distribution, it may be necessary to fit dummy fuses to extinguish the red LEDs. A future upgrade is planned to also send info back to the GX device over the VE-can, but is not yet implemented

...Read more View Product

£14.49

Blue Sea 5187 BS5187 Fuse Terminal 200A

MRBF Terminal Fuse - 200A BS5187 Blue Sea 5187 Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151—do not mount the fuse directly to the battery terminal Interrupt rating satisfies ABYC requirements for DC Main circuit protection on large battery banks Ignition protected—safe for installation aboard gasoline powered boats Clear window—visual indication of blown condition Color coded for each amperage

...Read more View Product

£178.99

100Ah 12V Deep Cycle Agm Battery For Motorhomes, Caravans, Boats, Back Up And Off-Grid Power Systems

What is an AGM battery? AGM stands for Absorbed Glass Mat - this is a battery in which all electrolyte is absorbed into a special sponge made of glass fibre. This advanced technology ensures that AGM batteries are non-spillable, completely sealed and maintenance free - they are one of the safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to less degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate. Other important benefits of AGM batteries include: Better recovery from deep discharge Their position doesn't have to be upright all the time These batteries have better resistance to shock and vibration Deep cycle means that this battery has been specially designed for applications which involve regular deep discharge. Such applications include using it as a leisure battery in caravans, motorhomes, campervans and boats, or energy storage in lighting systems, telecommunications, networking equipment and various types of off-grid power systems. This battery is also great for back up, emergency power storage and UPS systems. This battery is a perfect choice for our solar charging kits due to its excellent solar charge acceptance. It is also ideal for various wind power systems or for combined solar and wind energy storage. The service life of this battery is typically 3-5 years, but if treated well the battery can last up to 6-8 years. The battery comes packaged in a carton box with a user manual and bolts/washers for terminals. Specifications: Nominal voltage: 12V Nominal capacity: 100Ah (10h rate) / 105Ah (20h rate) Maximum charging current: 25A Self-discharging rate: <3% per month Cycle lifetime at 30% D.O.D.: 1000-1100 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from +10C to +40C Size: 331 x 173 x 217 mm Weight: 30.0 kg

...Read more View Product

£89.99

Sterling BM12123 Battery Maintainer.

This unit is perfect for keeping your campervan's starter battery topped up by transferring excess power from the leisure battery, which is especially useful when solar panels are charging the leisure battery. Once your leisure battery reaches about 13.3V, the unit activates, allowing surplus energy to flow to maintain the starter battery. While it doesn't offer fast charging or boosting, it mirrors the input voltage with only a small drop (typically around 0.2V less than the primary charge), which is more than sufficient to keep the starter battery topped up and cover small loads like the battery's internal discharge and the engine management system (up to 1A continuous). This feature is invaluable during periods of non-use, ensuring your starter battery stays healthy without the need for external charging. This unit is the perfect substitute for a dual-output solar charge controller. Instead of needing a solar controller with dual outputs to manage both your leisure and starter batteries, this unit simplifies the process by allowing excess power from the leisure battery to maintain the starter battery. With solar panels continuously topping up the leisure battery, this device efficiently manages the distribution of surplus energy, ensuring both batteries stay charged without the need for more complex or expensive equipment. It's an ideal solution for those looking to streamline their campervan's electrical system while keeping both batteries in good condition. Victron Dual Output MPPT Solar Charge Controller - It doesn't exist but this is the perfect alternative!

£35.49

Blue Sea 6006 BS6006 Switch Battery m-Series ON/OFF With Knob

m-Series Mini On-Off Battery Switch with Knob - Red BS6006 Blue Sea 6006 Switches a single battery to a single load group Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts View all Blue Sea M-Series Battery Switches

...Read more View Product

£55.99

Victron Energy SmartSolar MPPT 75V 10A – 75/10 SCC075010060R

Victron Energy SmartSolar MPPT 75V 10A – 75/10 SCC075010060R A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on our website for details Day/night timing and light dimming option See the software section on Victron for details Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. Brand Victron Energy Manufacturer Part Number SCC075010060R GTIN 8719076040798 Voltage 12/24V Rated Charge Current 10A Nominal PV Power, 12V 145W Max. PV Short Circuit Current 13A Max. PV Open Circuit Voltage 75V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H100 x W113 x D40mm Weight 0.5Kg Warranty 5 Years

...Read more View Product

£198.99

100Ah 12V Gel Deep Cycle Battery For Motorhomes, Caravans, Boats And Off-Grid Power Systems

What is a Gel battery? A gel battery is a type of Valve Regulated Lead Acid (VRLA) battery filled with special gel-type electrolyte. Gel batteries are non-spillable, completely sealed and maintenance free - one of the safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to less degradation and corrosion inside the battery. Gel batteries hold charge very well and have a much lower self-discharge rate. Other important benefits of gel batteries include: Better recovery from deep discharge Wider working temperature range (gel batteries work well even in cold temperatures as low as -10C) Their position doesn't have to be upright all the time These batteries have better resistance to shock and vibration Deep cycle means that this battery has been specially designed for applications which involve regular deep discharge. Such applications include using it as a leisure battery in caravans, motorhomes, campervans and boats, or energy storage in lighting systems, telecommunications, networking equipment and various types of off-grid power systems. This battery is also great for emergency power storage and UPS systems. This battery is a perfect choice for our solar charging kits due to its excellent solar charge acceptance. It is also ideal for various wind power systems or for combined solar and wind energy storage. The service life of this battery is more than 5 years, but if treated well the battery can last up to 10 years. The battery comes packaged in a carton box with a user manual and bolts/washers for terminals. Specifications: Nominal voltage: 12V Nominal capacity: 100Ah (10h rate) / 108Ah (20h rate) Maximum charging current: 20A Self-discharging rate: <1% per month Cycle lifetime at 30% D.O.D.: 1200-1300 Pressure control: safety valve installed Terminal type: F13 (bolts and washers included) Operating temperature: from -10C to +50C Size: 331 x 173 x 217 mm Weight: 30.3 kg

...Read more View Product

£57.00

Victron Energy BlueSolar MPPT 75/15 – SCC010015050R

Victron Energy BlueSolar MPPT 75/15 – SCC010015050R This Victron 75V 15A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery), battery state of charge, load status and consumption.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 75-15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries (requires Bluetooth dongle or USB interface cable to adjust battery type).

...Read more View Product

£13.99

Blue Sea 1011 Systems BS1011 12V DC Dash Socket

Blue Sea Systems 12VDC Dash Socket Blue Sea 1011 BS1011 Features watertight cap, easy installation, and twist locks securely with plug Designed to withstand the rigors of wet environments and constant vibration Large contact surfaces for good electrical connection Twist lock system—plug locks securely into socket Internal strain relief and cord seal Nickel plated copper alloy used for all current carrying components Front panel, rear panel, or surface mount

...Read more View Product

£39.99

Blue Sea 9003E Switch Battery e-Series ON/OFF BS9003E

Switch Battery e-Series ON/OFF Blue Sea PN 9003E BS9003E Blue Sea 9003E Series Battery SwitchSwitches a single battery to a single load groupIgnition protected—safe for installation aboard gasoline powered boatsCase design allows surface or rear panel mounting Cranking Rating: 10 sec. 2,000 Amps Cranking Rating: 1 min. 1,000 Amps Intermittent Rating: 5 min. 600 Amps Continuous Rating 350 Amps Maximum Voltage Rating 48 Volts DC Terminal Stud Size 3/8"-16 (M10) Terminal Stud Torque 140 in-lb (15.82 N m) max. Mounting Holes Accept 1/4" (M6) Screw Cable Size to Meet Ratings 4/0 AWG (120mm ) Cable Clearance For 4/0 AWG Cables 1.10" (27.9mm) Weight Lb (Kg) 0.95 (0.43)

£164.99

Victron Energy SmartSolar MPPT 100/50 – Solar Charge Controller SCC110050210

Victron Energy SmartSolar MPPT 100/50 – Solar Charge Controller SCC110050210 50A MPPT with max VOC 100V, 12 or 24 Volt battery A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. MPPT: Ultra Fast Maximum Power Point TrackingBy constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remote Monitoring and ControlRemotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

...Read more View Product

£239.99

LSLC125-12 Lucas AGM SLA Cyclic Battery 125ah

Lucas LSLC125-12 Sealed Lead Acid Battery, with Absorbent Glass Mat (AGM) technology. These quality manufactured batteries are capable of delivering up to 30% more deep cycling, making them a reliable source of power for more trips, longer journeys and longer battery life. Features: AGM technology Extra deep cycle capability Totally sealed – no spillage Completely maintenance-free Stand-by CCTV Fire, security and smoke alarms Alarm panels UPS Data storage Weight 32.5 kg Dimensions 330 × 171 × 224 mm

...Read more View Product

£146.15

Victron Energy Blue Smart IP22 Charger 12V 15A 3 Outputs - BPC121544022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC121544002 GTIN 8719076037422 Voltage 12V Charge Current 15A Input Voltage 230V Number of Outputs 3 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£599.99

Lithium Leisure Battery - Fogstar Drift 12v 300Ah

Lithium Leisure Battery - Fogstar Drift 12v 300Ah The Fogstar Drift 12V 300Ah Lithium Leisure Battery can be used across a wide range of applications, from solar energy to camper and caravans, golf carts to electric wheelchairs, marine and boating. The UK-designed leisure batteries offer a phenomenal cycle life (>4500 cycles at 80% DOD), low environmental impact and a superb 10 year warranty. Manufactured using Grade A EVE LiFePO4 Lithium cells, high discharge JBD BMS, built in Bluetooth and Heating as standard - our Lithium leisure battery collection offers everything you’d expect in a premium product. Thanks to the development of our JBD BMS, you can safely connect up to 4 batteries in series or parallel. All batteries come with access to our Fogstar Drift App, enabling you to access leisure battery data at all times. The Fogstar Drift app is free to download on both Android and iOS. Nominal Capacity 300Ah Nominal Voltage 12.8V Recommended Charge Voltage 14.4V Max Cont. Discharge 250A Dimensions L(380mm) x W (190mm) x H (245mm) Weight 26Kg IP67 Rated The Fogstar Drift terminals are all M8 in size, 1.25 pitch, 12mm. All of our Drift Leisure batteries come with bolts as standard. The Fogstar Drift 12V 300Ah is suitable for use with inverters up to 3000W in size.

...Read more View Product

£21.46

Blue Sea 2303 BS2303 BusBar 4x1/4in-20 Stud Common Bus

Blue Sea 2303 BS2303 BusBar 4x1/4in-20 Stud Common Bus The industry standard busbar for positive distribution. The industry standard busbar for the collection of negative or AC ground circuits

£247.99

Orion-Tr Smart 12/12V-30A Isolated DC-DC Charger ORI121236120

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. PRODUCT CODE: ORI121236120 Datasheet Victron Orion Isolated Datasheet Installation and Help Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here Video

...Read more View Product

£83.99

10A 12V Intelligent Automatic Multi-Stage Mains Battery Charger

This 10A 12V automatic multi-stage mains battery charger is designed to enable safe and efficient unattended charging of a 12V battery or battery bank from a mains power source (220-240V AC). This mains charger boasts an advanced 7 stage charging process which delivers faster and more efficient charging, whilst eliminating the risk of voltage fluctuations. This unit is able to charge either a single 12V battery, or several 12V batteries connected in parallel (batteries must be the same type, capacity and age). This mains battery charger is compatible with Lead Acid batteries, including AGM, Gel and Wet cell batteries. Key features: Safe unattended charging: the unit features inbuilt safety functions (protection against DC short circuit, overheating, and overcharging), which allow the charger to be left permanently connected to the battery for unattended automatic charging. Unlike many other mains chargers, the charging voltage is also free from peaks which offers smooth uninterrupted charging. Continued charging during battery use: the charger will continue to operate while energy is drawn from the battery during use. The unit will maintain the charge if the battery is already at full capacity. Boost-charging feature: this preliminary charging stage can improve battery condition and recover lost capacity from older batteries. It improves the charge delivered to the batteries, thereby increasing battery life and preventing premature battery failure. Dead battery recovery: the desulphation stage is able to break down sulphation that occurs in batteries which have been left flat for extended periods of time, returning them back to full charge. Automatic temperature control: to maintain an optimal internal temperature, the inbuilt fan is automatically enabled when a high temperature or charging current is detected. LCD Display: shows vital information regarding the charging process (charging voltage / charging current / different charging stages). LED lights also indicate the battery type. Power pack function: can provide a direct supply of power to a 12V load (e.g. 12V fridge) with no battery connected (e.g. during battery replacement). This charger is also supplied with a 1.5m mains AC cable with a UK 3-pin plug, 1 x 0.5m DC battery cable with crocodile clips, and spare fuses. Specifications: Operating Voltage range (AC): 190V - 265V (full capacity) / 50 Hz DC output current: 10A DC output voltage: 12V Suggested battery capacity: 15 - 100Ah Bulk / absorption charging voltage: 14.2V - 14.8V DC (depending on the battery type) Float charging voltage: 13.2V - 13.8V (depending on the battery type) Efficiency: <88% Operating temperature range: 0°C - 40°C Inbuilt fan Isolated DC output Dimensions: 176 x 175 x 95 mm Weight: 1.0 kg

...Read more View Product

£11.81

Blue Sea Systems 1010 12V DC Cigar Plug BS1010

Blue Sea Systems 1010 12V DC Plug BS1010 12VDC Plug Blue Sea BS1010

...Read more View Product

£149.00

Victron Energy BlueSolar MPPT 100/50 – SCC020050200

Victron Energy BlueSolar MPPT 100/50 – SCC020050200 This Victron 100V 50A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 50A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 100-50 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12/24V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Max solar panel voltage: 100V- Max solar panel power: 700W (12V) / 1400W (24V)- Temperature sensor for automatic compensation (-16mV / °C resp. -32mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 30mA (12V) / 20mA (24V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 130 x 186 x 70 mm- Mounting dimensions: 176 x 71.5 mm- Weight: 1.3kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£108.99

Victron Energy BlueSolar MPPT 100/30 – SCC020030200

Victron Energy BlueSolar MPPT 100/30 – SCC020030200 This Victron 100V 30A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 30A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 100-30 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12/24V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Max solar panel voltage: 100V- Max solar panel power: 440W (12V) / 880W (24V)- Temperature sensor for automatic compensation (-16mV / °C resp. -32mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 30mA (12V) / 20mA (24V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 130 x 186 x 70 mm- Mounting dimensions: 176 x 71.5 mm- Weight: 1.3kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£57.01

Victron Energy Blue Smart IP65 Charger 6V/12V 1.1A UK – BPC120134024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC120134024R GTIN 8719076055532 Voltage 6/12V Charge Current 1.1A Input Voltage 230V Protection Category IP65 Efficiency 82% Bluetooth Enabled Yes Plug Type UK Dimensions H38 x W64 x D153mm Weight 0.4Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£119.99

Victron Energy Blue Smart IP67 Charger 12V 13A 1 Output – BPC121347026

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC121347026 GTIN 8719076055273 Voltage 12V Charge Current 13A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H85 x W211 x xD60mm Weight 1.8Kg Warranty 5 Years

...Read more View Product

Blue Sea 5119 Fuse A3T/Class T 300A

Extremely fast short-circuit response. 20,000 Ampere Interrupt Capacity (AIC)

£182.49

Victron Energy Blue Smart IP22 Charger 12V 30A 3 Outputs – BPC123048022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC123048002 GTIN 8719076052401 Voltage 12V Charge Current 30A Input Voltage 230V Number of Outputs 3 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type Uk Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£23.99

Blue Sea 5001 Fuse Block MEGA 100A - 300A with cover BS5001

Accepts 5/16" (M8) ring terminals. Insulating cover satisfies ABYC/USCG insulation requirements. Insulating cover breakouts allow wire access in three directions. Insert molded studs ensure secure fuse mounting. Stainless steel studs provide resistance to corrosion and high torque for excellent electrical contact. UL 94-V0 base resists high heat. Fuse sold seperately

£99.95

High Efficiency 20A Dual Battery Mppt Solar Charge Controller With Lcd Display For Solar Panels Up To 260W (12V Battery System) / 520W (24V Battery System)

Dual Battery ChargingThis advanced 20A 12V/24V dual battery solar controller uses advanced MPPT technology to charge two independent batteries or battery banks. The main battery is charged at high power, while a secondary battery is given a trickle charge of up to 1A. This makes it a perfect solar controller for a campervan, motorhome, boat or any other system with 2 batteries (e.g. engine and leisure battery). The main battery will be charged with a majority of the power, whilst the second battery will be trickle charged to keep it topped up and ready for use.Maximum Power Point Tracking (MPPT) TechnologyMPPT technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined solar input power allowed for this controller is 260W for a 12V battery system or 520W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full Range of Protection Functions:This charge controller features a comprehensive set of electronic protection functions to prevent reverse current at night (from the battery back to the solar panel), over-charging, short circuit, reverse polarity and more. The solar controller case is water resistant to a rating of IP33 when installed, for protection against sprays of water at up to 60 degrees from vertical.Advanced Battery Compatibility:Unlike many other less advanced solar charge controllers, this model is 100% compatible with a broad range of battery types for the main battery, such as Gel, AGM, Lead-Acid Flooded, and Lithium (LiFePO4 or Li-NiCoMn) batteries.Advanced System Functionality:The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel, system voltage recognition based on secondary battery)Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for the solar panel and each battery), battery state of charge, and accumulated charging energyEasy to use buttons allow the user to manually select the battery type (sealed, flooded, gel or Lithium), change the temperature units, and reset the in-built counters (charging energy, min/max voltages)When not in use, the system automatically goes into a low power mode, reducing standby consumption when there is no solar power available, such as when the vehicle is parked in a garageCurrent limiting function (20A) allows the possibility of adding more solar panels to your solar system in the future This model is also compatible with a remote meter MT11 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings from an easy to use and install remote screen.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely. This allows the system to optimise the charging process for lead acid batteries or provide low temperature protection for lithium batteries. Controller specifications: The most advanced MPPT technology to ensure high efficiency (>95%) of your solar system Fully automated operation and auto 12/24V selection 3 pairs of terminals (solar panel, battery 1, battery 2) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 260W (12V) / 520W (24V) Temperature sensor for automatic compensation (-3mV/°C/2V) Comprehensive electronic protection features Communication port: RS485 interface Grounding: negative common ground Current limiting function (20A) Self-consumption: <26mA Working temperature: -30°C to +80°C Size: 243.7 x 158 x 63 mm Mounting dimensions: 180 x 149 mm Weight: 1.1 kg Multiple mounting holes (5mm diameter) for ease of installation

...Read more View Product

£201.99

Orion-Tr Smart 24/12V-30A Non-Isolated DC-DC Charger ORI241236140

Orion-Tr Smart 24/12V-30A Non-Isolated DC-DC Charger ORI241236140 The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. PRODUCT CODE: ORI241236140 DC to DC (Battery to Battery) Wiring Diagram, Information and Help Datasheet Victron Orion Non-Isolated Datasheet Installation and Help Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here Wiring Diagram Video

...Read more View Product

£15.55

Blue Sea 5184 Fuse Terminal 125A

Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151?do not mount the fuse directly to the battery terminal. Interrupt rating satisfies ABYC requirements for DC Main circuit protection on large battery banks. Ignition protected?safe for installation aboard gasoline powered boats. Clear window?visual indication of blown condition. Color coded for each amperage

...Read more View Product

Best Seller

£49.99

Blue Sea 9001E BS9001E Switch Battery e-Series Selector 4 Position Red

Blue Sea 9001E BS9001E Switch Battery e-Series Selector 4 Position Red Switches isolated battery banks to all loads or combines battery banks to all loads Make-before-break contact design allows switching between battery banks without power interruption Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting View all Blue Sea e-Series Battery Switches

£164.99

Victron Energy SmartSolar MPPT 150/35 – Solar Charge Controller - SCC115035210

Victron Energy SmartSolar MPPT 150/35 – Solar Charge Controller - SCC115035210 This Victron 150V 35A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. SmartSolar MPPT controllers uniquely feature built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device.Ultrafast MPPT Technology:This 35A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, reverse polarity, overvoltage, overcurrent and reverse current, as well as battery overvoltage, reverse polarity and overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional control panel:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage. Other features:The Victron SmartSolar MPPT 150-35 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36* / 48V selection- 2 pairs of terminals (solar panel, battery) for wires up to 16mm2- Inbuilt bluetooth- Max solar panel voltage: 150V- Max solar panel power: 500W (12V) / 1000W (24V) / 1500W (36V) / 2000W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -68mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 20mA (12V) / 15mA (24V) / 10mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 130 x 186 x 70 mm- Weight: 1.25kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£52.99

Blue Sea 6011 BS6011 Switch Battery m-Series Dual Circuit Plus Red

m-Series Mini Dual Circuit Plus™ Battery Switch - Red BS6011 Blue Sea 6011 Simultaneously switches two isolated battery banks or combines battery banks to all loads Make before break contact design allows switching between battery banks without power interruption View all Blue Sea M-Series Battery Switches

£41.99

Blue Sea 1045 BS1045 12/24VDC Dual USB Charger 4.8A Socket

Blue Sea Systems 1045 12/24V Dual USB 4.8A Chargers - Socket Mount 1045 Intelligent device recognition allows rapid charging of phones, tablets, or other mobile devices Charges at the speed required by specific devices Internal filtering for reduced electronic interference Over temperature protection Protective dust cap keeps debris and moisture out Conformal coated circuit board for the harsh marine environment Mounts in a common 1-1/8" hole

£45.95

Cyrix-ct 12/24V-120A Intelligent Battery Combiner

Efficient Power Management with Victron Cyrix-ct 12/24V-120A Intelligent Battery Combiner Maximize your energy solutions with the Victron Cyrix-ct 12/24V-120A Intelligent Battery Combiner, a state-of-the-art device designed for seamless battery management. Ideal for marine, RV, and off-grid applications, this robust battery combiner ensures optimal performance and reliability. Key Features: Intelligent Voltage Sensing: Automatically detects voltage levels, ensuring efficient charging and discharging between multiple battery banks. High Current Capacity: With a 120A continuous current rating, it effortlessly handles the demands of most electrical systems. Dual Voltage Compatibility: Perfectly suited for both 12V and 24V systems, making it a versatile choice for various setups. Priority Charging Feature: Prioritizes the charging of your main battery, ensuring critical operations are always powered. Bi-directional Charging: Allows for charging in both directions, enhancing the flexibility and efficiency of your power system. Overload Protection: Integrated protection mechanisms safeguard against overcurrent and short circuits, ensuring longevity and safety. Compact and Durable Design: Engineered for the toughest conditions, it's compact enough to fit in tight spaces and durable enough to withstand harsh environments. Benefits: Enhanced Battery Life: By intelligently managing the charge, it extends the life of your batteries. Energy Efficiency: Reduces energy waste, ensuring you get the most out of your power sources. Easy Installation: Simple setup process makes it accessible even for those with basic technical knowledge. Versatility: Ideal for a wide range of applications, from boats and RVs to renewable energy systems. Why Choose Victron Cyrix-ct 12/24V-120A? The Victron Cyrix-ct is more than just a battery combiner; it's a smart investment in your energy system. Its intelligent features and robust design make it a top choice for professionals and enthusiasts alike who demand reliability and efficiency. Whether you're sailing the seas, exploring the open road, or harnessing renewable energy, the Victron Cyrix-ct is your trusted partner in power management. Cyrix Battery Combiners: A Closer Look Cyrix Battery Combiners are a revolutionary solution in the realm of battery management. These devices are designed to maximize the efficiency and reliability of your battery systems, making them an ideal choice for a variety of applications. Understanding the Technology At the heart of Cyrix Battery Combiners is a microprocessor-controlled heavy-duty relay. This advanced technology ensures minimal voltage loss, a common issue with traditional diode isolators. By optimizing battery charging and discharging, Cyrix Battery Combiners maintain the health and longevity of your batteries. Functionality and Benefits One of the key functionalities of Cyrix Battery Combiners is their ability to automatically connect batteries in parallel during charging and disconnect them when the voltage drops below a certain level. This feature not only enhances the efficiency of your battery system but also its reliability. Diverse Applications Whether you're dealing with automotive, marine, off-grid, backup, or island systems, Cyrix Battery Combiners are up to the task. Their compatibility with various alternators and battery chargers makes them a versatile component in any power management setup. Easy Installation and Maintenance Installing and maintaining your Cyrix Battery Combiner is straightforward. The step-by-step guide ensures a hassle-free setup, and the tips provided help in maintaining optimal performance. In case of any issues, the troubleshooting section offers practical solutions. Conclusion In conclusion, Cyrix Battery Combiners are an essential component for anyone looking to enhance the efficiency and reliability of their battery systems. With their advanced technology and wide range of applications, they are a smart investment for both short-term performance and long-term battery health. Cyrix-ct Datasheet Cyrix-ct 12/24V-120A Intelligent Battery Combiner Datasheet Cyrix Wiring Diagram

...Read more View Product

£52.43

Blue Sea 6010 BS6010 Switch Battery m-Series Dual Circuit

m-Series Mini Dual Circuit Battery Switch - Red BS6010 Blue Sea 6010 Simultaneously switches two isolated battery banks View all Blue Sea M-Series Battery Switches

...Read more View Product

Blue Sea 5107 Fuse MEGA 250A/32V

Most economical fuse for 100-300 Ampere circuit protection. For use with Blue Sea Systems' MEGA?/AMG? Fuse Block

£82.00

Victron Energy BlueSolar MPPT 100/20 – SCC110020170R

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on Victron for details Day/night timing and light dimming option See the software section on Victron for details Programming, real-time data and history display options – Color Control GX or other GX devices: see the Venus documents on our website. – A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC110020170R GTIN 8719076049845 Voltage 12/24/48V Rated Charge Current 20A Nominal PV Power, 12V 290W Max. PV Short Circuit Current 20A Max. PV Open Circuit Voltage 100V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H100 x W113 x D60mm Weight 0.65Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£101.36

Victron Energy Blue Smart IP67 Charger 24V 5A 1 Output – BPC240531064R

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC240513006 GTIN 8719076035947 Voltage 24V Charge Current 5A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 94% Bluetooth Enabled Yes Plug Type CEE 7/7 Dimensions H85 x W211 x D60mm Weight 1.8Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£15.55

Blue Sea 5178 Fuse Terminal 60A

Blue Sea 5178 Fuse Terminal 60A Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151?do not mount the fuse directly to the battery terminal. Interrupt rating satisfies ABYC requirements for DC Main circuit protection on large battery banks. Ignition protected?safe for installation aboard gasoline powered boats. Clear window?visual indication of blown condition. Color coded for each amperage

...Read more View Product

£44.99

Victron Energy BlueSolar MPPT 75/10 – SCC010010050R

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on Victron for details. Day/night timing and light dimming option See the software section on Victron for details. Programming, real-time data and history display options – Color Control GX or other GX devices: see the Venus documents on our website. – A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC010010050R GTIN 8719076025306 Voltage 12/24V Rated Charge Current 10A Nominal PV Power, 12V 145W Max. PV Short Circuit Current 13A Max. PV Open Circuit Voltage 75V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H100 x W113 x D40mm Weight 0.5Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£166.99

Victron Energy Blue Smart IP22 Charger 12V 20A 3 Outputs – BPC122043022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC122044002 GTIN 8719076037446 Voltage 12V Charge Current 20A Input Voltage 230V Number of Outputs 3 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£30.05

Blue Sea 2719 BS2719 Cover MaxiBus for 2127/2128

MaxiBus Insulating Cover for Blue Sea Busbars 2127 and 2128 Blue Sea 2719 BS2719 Insulating cover with breakouts for superior electrical insulation Insulating cover meets ABYC insulations requirements

...Read more View Product

£367.99

Victron Energy SmartSolar MPPT 250V 60A Tr – 250/60 SCC125060221

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Remote Monitoring and Control Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. Synchronized parallel charging with Bluetooth Up to 10 units can be synchronized with Bluetooth. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. Brand Victron Energy Manufacturer Part Number SCC125060221 GTIN 8719076050841 Voltage 12/24/48V Rated Charge Current 60A Nominal PV Power, 12V 860W Max. PV Short Circuit Current 35A Max. PV Open Circuit Voltage 250V absolute maximum coldest conditions 245V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled Yes Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture Malaysia

...Read more View Product

£209.99

Victron Energy SmartSolar MPPT 150V 45A – 150/45 SCC115045212

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultrafast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F). Flexible charge algorithm Fully programmable charge algorithm (see the software page on Victron), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection – Over-temperature protection and power derating when temperature is high. – PV short circuit and PV reverse polarity protection. – PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function Brand Victron Energy Manufacturer Part Number SCC115045212 GTIN 8719076053026 Voltage 12/24/48V Rated Charge Current 45A Nominal PV Power, 12V 650W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H130 x W186 x D70mm Weight 1.25Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£189.99

TN Power AGM 12V 100Ah Deep Cycle Battery

100Ah AGM Deep Cycle Leisure Battery TNE Series, TN’s most powerful products, are specially designed for deep cycle application. With numbers of national patent technologies, the cycle life reaches 400-600 cycles at 100% DOD, highly suitable for golf carts, electric wheelchairs, low-speed electric vehicles etc. Maintenance free technology reduce the complexity with water adding during use and become more and more popular in the market. Features Maintenance Free VRLA battery, no need to add water or acid during application. Longer cycle life: 400-600 cycles at 100%DOD. Higher capacity: Patented structure design with high utilization of active material, maximum improve the utilization rate of active material and the utilization ratio of battery internal space, 5%-10% higher capacity than similar products in the market. High performance for large current discharge. New structure for plate grid, greatly reduced resistance of the battery, uniform internal electrochemical reaction under large current discharge, excellent capacity recovery from deep discharge Good corrosion resistance of grid. Unique patent alloy with rare earth material, the grid has super corrosion resistance and creep resistance High performance under low temperature. With added conductive material and cryogenic expansion agent of high activity to the plate, the product is of strong accept ability under low temperature. Safety & reliability. Independent designed automatic anti-dry and removable safety valve for convenient common check as well as the sealing function to reduce water loss in the process of charge and discharge and to improve reaction efficiency of sealing. Application Electric Tricycle Low speed electric vehicles Golf trolleys and golf cart Patrol cars Electric Sight-seeing Tour Bus Sweeper Electric Wheelchairs Lawn mowers etc Campervans Motorhomes Caravans Brand TN Power Manufacturer Part Number TNE12-100 Voltage 12 Capacity (C20) 100 Terminal Type I3 Terminal Layout LH+ Dimensions (Including Terminals) L260 x W168 x H210mm Weight 26Kg Warranty 2 Years Battery Technology AGM Battery Application Deep Cycle Country of Manufacture China

...Read more View Product

£109.99

High Efficiency 30A Mppt Solar Charge Controller For Solar Panels Up To 390W (12V) / 780W (24V) Up To 100V

MPPT Technology:This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined input solar power allowed for this controller is 390W for a 12V battery system or 780W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full system protection:This charge controller features a comprehensive set of electronic protection functions to ensure the maximum possible efficiency of your solar system. These include: reverse current prevention at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, solar panel over voltage, over load, short circuit and reverse polarity protection. The controller also has self-diagnostic capability and highlights any system errors using advanced fault-targeting technology. Lithium Battery charging:This solar charge controller is compatible with lithium batteries when a lithium battery charging program is selected using PC software (see below for more details).Advanced system monitoring:The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel)Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energyEasy to use buttons allow the user to manually select the battery type (sealed, flooded or gel) and program load settings (e.g. set timers for lighting, fans, pumps etc).Current limiting function (30A) allows the possibility of adding more solar panels to your solar system in the future Multiple connectivity optionsThis model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only). If using the RJ45 to USB cable, the user also has the option to create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and can also set the charging parameters for lithium batteries.Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. (Inbuilt temperature sensor is not enabled for lithium batteries).

...Read more View Product

£9.44

Blue Sea 5065 BS5065 Fuse Holder ATO/ATC Waterproof

Waterproof In-Line ATO/ATC Fuse holder BS5065 Blue Sea 5065 For use with ATO or ATC fuses Supplied with 12 AWG pigtails 30A Maximum fuse amperage Fuse sold separately

...Read more View Product

£19.99

Blue Sea 2315 BS2315 MiniBus 4x 10-32 CommonBus with Cover

Common 100A Mini BusBar - 4 Gang with Cover BS2315 Great for limited space applications

Blue Sea 5118 Fuse A3T/Class T 250A

Extremely fast short-circuit response. 20,000 Ampere Interrupt Capacity (AIC)

...Read more View Product

£280.99

Victron Orion XS 1400 DC-DC battery charger ORI242417040 - Suitable for 12V-12V, 12V-24V, 24V-12V and 24V-24V DC charging, up to 1400W

Victron Orion XS 1400 DC-DC battery charger ORI242417040 Engineered from the ground up, the Orion XS 1400 is Victron Energy's highly anticipated next generation muti-voltage DC-DC charger that redefines charging on the move for dual battery systems. The XS 1400 version differs from the XS in that it can accept an input from either a 12V or 24V alternator and charge either a 12V or 24V battery, with a maximum output of 50A , making it powerful and versatile. It is fully compatible with smart alternators found in Euro 5 or 6 vehicles and has a wide input voltage range to accommodate input cable voltage drop. The input and output current limits can be set by the user and innovative cooling technology provides a 98% efficiency without the need for a fan or heatsink, enabling a lightweight and compact, yet powerful charging unit. There are 8 pre-programmed charging algorithms, or you can create a fully customisable algorithm to match the battery manufacturer's charging voltage requirements. The Orion XS 1400 will produce its full rated output up to 40°C and multiple units can be connected in parallel to increase charge output. It can also be used in fixed-voltage power supply mode with a user-configurable output of 10-35V. A host of electronic protection features guarantee the safety of your alternator and your battery, and physical protection is assured thanks to its P65 dust and water-proof rating. The unit is fully configurable via Bluetooth using the VictronConnect app and features a VE.Direct port for connection to a Cerbo GX or Ekrano GX. This allows remote monitoring and control of the Orion XS 1400 and provides seamless integration with the rest of your Victron system. Multi-voltage use The Orion XS 1400's wide input and output voltage range enable it to be used with any combination of 12V & 24V systems on the input and output, making it suitable for a wide range of vehicles and auxiliary battery systems. The 50A charge current provides a maximum power output of 1400W @24V, and 700W @12V, and an unlimited number of units can be connected in parallel to increase the output (where alternator capacity allows). Settings in the Victron Connect App allow you to select your alternator voltage and type, and your auxiliary battery voltage. Smart alternator compatibility Regardless of the variable input voltage produce by smart alternators, the charger keeps operating and maintains the chosen algorithm for perfect battery charging. The on-board engine running detection system ensures that the charger only activates when the alternator supplies power (i.e. when the engine is running) and prevents your vehicle starter battery being drained when the engine is off. Alternator overload protection The input and output currents can be precisely controlled in increments of 0.1A using simple controls in the Victron Connect App. This input current control guards against alternators being overloaded (especially when using lithium batteries that can accept very high charge currents) and the output current control allows you to set the charge current to suit the type and capacity of battery being charged. Adaptive charge algorithm The Orion XS 1400 includes customisable charging algorithms and 8 pre-set battery modes. For lead acid batteries, these settings ensure optimal absorption times for both shallow and deep discharges. During shallow discharges of lead-acid batteries the absorption time must be kept short in order to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged. Comprehensive electronic protection The Orion XS 1400 comes equipped with comprehensive electronic protection against overload, short circuit and excessive temperatures, and will automatically reduce the output power when maximum product temperature is reached. To prevent damaging lithium batteries the charger will turn off automatically at low temperatures, and to protect the starter battery from being over-discharged it will shut down when the input voltage drops below a configurable lockout value, and restart when the input voltage rises above the restart value. Dust tight & waterproof The Orion XS 1400's ingress protection rating of IP65 makes it dust-tight, protected against heavy rain, and suitable for use in harsh environments such as vehicle engine bays and boat engine rooms. Features Ultimate flexibility - charge a 12V or 24V battery from a 12V or 24V alternator Adjustable input & output current in 0.1A steps 'Smart' or standard alternator compatible Separation of starter and auxiliary batteries Adaptive 4-stage charging algorithm Fully programmable battery charging profile Suitable for all battery types (inc. lithium) Automatic temperature-compensated charging Comprehensive electronic protection Unlimited parallel operation to increase output Power supply mode Remote On/Off Bluetooth Smart enabled VE.Direct port for connection to Cerbo GX or Ekrano GX IP65 waterproof protection Spec Value Input Voltage Range 9V – 35V Output Voltage Range 10V – 35V Adjustable Current 1 – 50A (Input/Output) Efficiency Up to 98.5% Continuous Power Output 700W (at 50A, 12→12/12→24/24→12V up to 40°C), 1400W (24→24V up to 35°C) Standby Current <1.5mA Ingress Protection IP65 (dust-tight, water-resistant) Charge Modes Bulk, Absorption, Float, Storage Battery Support Lithium (LiFePO4), AGM, Gel, Flooded Connection VE.Direct, Remote On/Off, Bluetooth Smart Mounting Orientation Vertical (terminals down)

...Read more View Product

£34.95

Waterproof 10A 12V Mppt Solar Charge Controller / Regulator For Caravans, Motorhomes, Campervans, Boat, Yacht And Marine Applications

This high quality waterproof 10A 12V solar charge controller is designed to protect batteries whilst charging them, with a full range of automatic protection features. The controller uses high efficiency MPPT charging technology to get the most possible power out of your solar panels.This controller stops reverse current (from the battery back to the solar panel) so your battery won't lose any charge at night and can be left permanently connected. It has many other protection functions such as over charge / discharge shut-off, over load and short circuit protection for the load terminals, overheating protection for the battery and more.This controller can work with sealed/AGM, gel and flooded/wet batteries. With a wide range of solar input voltages (up to 45V) this controller can work not only with standard off-grid solar modules, but also with on-grid panels which have higher voltage. The controller can accept up to 130W of solar panels which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a camper van or boat.In addition, the solar charge controller is completely sealed with a very high degree of water protection. It is absolutely safe to use this solar controller in all weather conditions.With the remote IR programmer (purchased separately), this controller can be wirelessly monitored and adjusted. The controller has a fully programmable timer with dimmer functionality, which monitors the dusk and dawn times based on the solar panel voltage and can adjust the percentage power of the load in 5 independently-timed stages, making this controller ideal for outdoor lighting systems. Controller specifications: Protection rating: IP67 Default charging program: 12V Gel Current rating: 10A Max solar input power: 130W Max solar input voltage: 45V Self-consumption: 6mA Ambient conditions: -35 – +60°C, 0 – 100% RH humidity, <4000m altitude Dimensions: 85.8 x 81 x 23.1 mm Weight: 260g Mounting holes for ease of installation

£296.99

Sterling Power 12V/24V 30A Battery to Battery Charger BB122430

STERLING POWER PRO BATT ULTRA 12V/24V 30A BATTERY TO BATTERY CHARGER BB122430 Sterling Power Pro Batt Ultra compact design battery to battery charger - 12V DC in /24V DC out. This is the latest model Euro 6+ compatible (identifiable by the green strip on front of the casing) - regenerative braking / smart alternator mode can operate without an ignition feed. Features High power battery to battery charger 12V/24V 30A spec - 12V source battery to charge 24V battery bank Ideal for commercial/leisure vehicles and marine applications Default mode complements regenerative braking and does not require ignition feed Additional modes with ignition feed and timer options 9 preset battery chemistry options plus custom profile settings IP 21 drop proof design (non waterproof) 100% fireproof plastic casing with multi-stage fan cooling Weighs 1.4Kg Measures 190mm x 160mm x 70mm Optional remote control Sterling part number BB122430 DC to DC (Battery to Battery) Wiring Diagram, Information and Help

...Read more View Product

£179.99

Exide EP800 Dual AGM Battery (017) 95Ah 850cca

Exide EP800 Dual AGM Battery (017) 95Ah 850cca Exide DUAL AGM battery range is designed for boats and caravans with one battery bank for all consumers. It is also suitable for additional batteries applied directly to electrical winches, thrusters and trolling motors. The batteries are partially discharged during use. DUAL AGM’s reinforced design, combined with a good recharging procedure, is key to providing the best result and service life. The DUAL AGM battery range, with Wh* performance from 450-2100 Wh, is the ideal choice to cover all dual-supply needs for the most popular recreational boats. BENEFITS Ideal for most popular range of motorhomes & caravans High mounting flexibility Maintenance free High vibration & tilt resistant, spill-proof, leak-proof With AGM technology (absorbed glass mat flat plate or orbital) with VRLA venting (valve regulated) , Wh* performance range coverage goes from 450Wh to 2100Wh Manufacturer: ExidePart Number: EP800Weight: 26.5kgLength: 353mmWidth: 175mmHeight: 190mmVoltage: 12VCapacity (AH): 95Cold Cranking (EN): 850Terminal Layout: + rightBattery Type: AGMWarranty: 12 MonthsApplication: Engine Start

...Read more View Product

£13.88

Mains Hook Up Inlet Socket Caravan M-home Camper Flush Fitting WHITE 01646T15099

FAWO Mains Hook Up Inlet Socket Mains 240v Inlet Flush Fitting 240v Caravan / Motorhome / Boat / Horse Box. Flush Fitting 3 Pin Mains Inlet box Colour: White Aperture Size: Height 90mm x Width 80mm x Depth 90mm Overall Dimensions: Height 106mm x Width 106mm Waterproof Rating: IP44 Part No: 01646T15099

£159.99

Victron Energy BlueSolar MPPT 150/35 – SCC020035000

Victron Energy BlueSolar MPPT 150/35 – SCC020035000 This Victron 150V 35A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 35A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 150-35 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36* /48V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Max solar panel voltage: 150V- Max solar panel power: 500W (12V) / 1000W (24V) / 1500W (36V) / 2000W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -64mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 20mA (12V) / 15mA (24V) / 10mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 130 x 186 x 70 mm- Mounting dimensions: 176 x 71.5 mm- Weight: 1.25kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£52.75

Water-Resistant Accessory Panels - 15A Circuit Breaker, 12V Socket, 2.1A Dual USB Charger BS4363 Blue Sea 4363

Water-Resistant Accessory Panels - 15A Circuit Breaker, 12V Socket, 2.1A Dual USB Charger BS4363 Blue Sea 4363 Easy to install accessory panels include a 15A circuit breaker switch and a pre-wired harness.Panels offer customizable 12V charging and monitoring options. Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only

£14.99

Blue Sea 2304 BS2304 MiniBus 5x 8-32 Stud Common Bus

Blue Sea 2304 Common 100A Mini BusBar - 5 Gang BS2304 Great for limited space applications

...Read more View Product

£39.65

Blue Sea 5121 Fuse A3T/Class T 400A

Extremely fast short-circuit response. 20,000 Ampere Interrupt Capacity (AIC)

...Read more View Product

£375.00

Victron Energy AGM Dual Purpose Battery 12V 165Ah (M8) - BAT412151085

The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches.VRLA AGM: design life 7-10 yearsFeaturesVRLA technologyVRLA stands for Valve Regulated Lead Acid, which means that the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure.VRLA batteries are maintenance free for life.Sealed (VRLA) AGM BatteriesAGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of high currents than gel batteries.Low Self-DischargeBecause of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C.Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions.Exceptional Deep Discharge RecoveryVictron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge.Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries, Victron batteries are no exception.Battery Discharging CharacteristicsThe rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C. The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge. The effective capacity decreases with increasing discharge current (see table 1). Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter. GTIN 8719076037040 Voltage 12V Battery Capacity (C20) 165Ah Cold Cranking 600CCA Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) L485 x W172 x H240mm Weight 47Kg Warranty 2 Years Country of Manufacture Vietnam Battery Technology AGM Battery Application Dual Purpose

...Read more View Product

£248.99

Victron Energy Orion-Tr Smart 12/24V 15A (360W) Isolated DC-DC Charger – ORI122436120

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. DC to DC (Battery to Battery) Wiring Diagram, Information and Help Brand Victron Energy Manufacturer Part Number ORI122436120 GTIN 8719076047704 Voltage 12/24V Cont. Output Current 15A Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 88% Bluetooth Enabled Yes Dimensions H130 x W186 x D80mm Weight 1.8Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£297.99

Rolls Series 5 S12-128 AGM Deep Cycle Battery

Deep cycle refers to applications that typically discharge 60-80% of the battery capacity. The Rolls S Series S12-128 AGM Deep Cycle AGM battery features thick plates with a high density active material. This design allows for reserve energy to be stored deep within the battery plates and released during slow discharge. The Rolls AGM range are sealed, non hazardous and completely maintenance free and?will suit the customer looking for a long reliable, maintenance free service life. Rolls has designed a Deep Cycle VRLA battery with high reserve capacity, long cycle life and low internal resistance, while achieving superior cranking performance. Rolls AGM batteries are the smart choice for demanding renewable applications.They are designed and built differently than standard batteries. They use more lead, heavier plates and other proprietary materials that enable them to deliver more power and capacity over many life cycles. Specifications Weight 32 kg 70.5 lbs Length 32.8 cm 12.91" Width 17.5 cm 6.89" Height Inc. Term. 23.7 cm 9.33" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Nylon Strap Series AGM-S Warranty See Warranty Terms Volts 12 BCI Grp 31 Cells 6 Terminal Type DT Included Hardware Stainless Steel Nuts & Bolts Size & Thread DT Charge Charge Voltage Range 14.5-14.9 V/cell @ 25°C (77°F) Float Voltage Range 13.6-13.8 V/cell @ 25°C (77°F) Recommended Charge Current 25 A Maximum Charge Current 35 A Self-Discharge Rate Less than 2% per month at 25°C (77°F) Internal Resistance 5 mΩ Capacity Cold Crank Amps (CCA) 0°F / -18°C 800 Marine Crank Amps (MCA) 32°F / 0°C 1000 Reserve Capacity (RC @ 25A) 220 Minutes Reserve Capacity (RC @ 75A) 70 Minutes Capacity Affect by Temperature 40°C(104°F) 25°C(77°F) 0°C(32°F) -15°C(5°F) 102% 100% 85% 65% Hour Rate Capacity / AMP Hour Current / AMPs @ 100 Hour Rate 128 AH 1.28 A @ 20 Hour Rate 115 AH 5.75 A @ 10 Hour Rate 105 AH 10.5 A @ 5 Hour Rate 97 AH 19.3 A Cut Off Voltage Constant Current Discharge VPC 1 hr 2 hr 3 hr 5 hr 8 hr 10 hr 62.1 33 27 18.2 11.9 10.5 View all Rolls Batteries

...Read more View Product

£21.99

Sinolec Professional 12V 140A Split Charge Voltage Sensitive Relay - VSR

Sinolec Professional 12V 140A Split Charge Voltage Sensitive Relay - VSR - EU Certified Voltage Sensitive Relay / 140A 12Vdc (125A Continuous) / Voltage Range 12.8V to 13.3V / 10mA Standby Power Drain / Built in LED / RoHS, CE / JH-VSR2008.

...Read more View Product

£11.95

Panel Mounted Mini Battery Isolation Kill Cut Off Switch 12V 100A Kit Car Marine

Miniature battery isolation / master switch designed for panel mounting in a standard 29mm dia. accessory hole. This switch is the perfect solution for isolating domestic circuits from the leisure battery in a campervan, caravan or motorhome where a toggle/rocker switch is not sufficient but a full size isolation switch is too bulky. Useful for preventing battery drain if left for long periods or for isolating the power source in an emergency. High quality switch manufactured by SCI of Taiwan. Useful for preventing battery drain if left for long periods or for isolating the power source in an emergency. Voltage rating: 32V DC max.Max. continuous operating current: 100A (150A intermittent) Cranking Rate: 500 Amps 5 secondsBody material: Nylon Housing with Glass Fibre Terminal stud size: M6Panel hole size for barrel clearance: 29mmOverall dims: 56 (L) mm x 45 (Dia) mmMax panel thickness: 10mm Protrusion from front of panel: 20mm

£26.49

Blue Sea 5005 BS5005 Fuse Block ANL 35 to 300A with cover

ANL Fuse Block with Insulating Cover - 35 to 300A BS5005 Accepts 5/16" (M8) ring terminals For use on systems up to 32 Volts DC Swing out design allows replacement of the fuse without removing fasteners Stainless steel studs provide resistance to corrosion and high torquing for excellent electrical contact UL 94-V0 base resists high heat Insert molded studs ensure secure fuse mounting Insulating cover satisfies ABYC/USCG requirements Cover breakouts allow wire access in any direction Fuse sold separately

£27.99

Blue Sea 1016 12/24VDC Dual USB Charger 5V 2.1A Socket BS1016

Blue Sea Systems 1016 12/24VDC Dual USB Charger 5V 2.1A Socket Blue Sea BS1016 Charge two mobile devices on the go Made with corrosion resistant materials which ensure a solid contact and low voltage drop. Fits in same mounting hole as a traditional 12 Volt outlet Compatible with most mobile devices including Apple® products Protective dust cap with tether keeps dust and spray from shortening the life of the charger Conformal coated circuit board to stand up to the harsh marine environment 2A Supply fuse is not included Easy to install in existing 12V DC socket hole providing convenient access for charging mobile devices

£180.99

Victron Energy Orion-Tr Smart 12/24V 15A (360W) Non-isolated DC-DC Charger – ORI122436140

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number ORI122436140 gtin 8719076048961 Voltage 12/24V Cont. Output Current 15A Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 88% Bluetooth Enabled Yes Dimensions H130 x W186 x D80mm Weight 1.8Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£94.89

Victron Energy Blue Smart IP67 Charger 12V 7A 1 Output – BPC120747026

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC120747026 GTIN 8719076035923 Voltage 12V Charge Current 7A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 93% Bluetooth Enabled Yes Plug Type CEE 7/7 Dimensions H85 x W211 x D60mm Weight 1.8Kg Warranty 5 Years

...Read more View Product

£119.95

High Efficiency 30A Dual Battery Mppt Solar Charge Controller With Lcd Display For Solar Panels Up To 390W (12V Battery System) / 780W (24V Battery System)

Dual Battery ChargingThis advanced 30A 12V/24V dual battery solar controller uses advanced MPPT technology to charge two independent batteries or battery banks. The main battery is charged at high power, while a secondary battery is given a trickle charge of up to 1A. This makes it a perfect solar controller for a campervan, motorhome, boat or any other system with 2 batteries (e.g. engine and leisure battery). The main battery will be charged with a majority of the power, whilst the second battery will be trickle charged to keep it topped up and ready for use.Maximum Power Point Tracking (MPPT) TechnologyMPPT technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined solar input power allowed for this controller is 390W for a 12V battery system or 780W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full Range of Protection Functions:This charge controller features a comprehensive set of electronic protection functions to prevent reverse current at night (from the battery back to the solar panel), over-charging, short circuit, reverse polarity and more. The solar controller case is water resistant to a rating of IP33 when installed, for protection against sprays of water at up to 60 degrees from vertical.Advanced Battery Compatibility:Unlike many other less advanced solar charge controllers, this model is 100% compatible with a broad range of battery types for the main battery, such as Gel, AGM, Lead-Acid Flooded, and Lithium (LiFePO4 or Li-NiCoMn) batteries.Advanced System Functionality:The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel, system voltage recognition based on secondary battery)Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for the solar panel and each battery), battery state of charge, and accumulated charging energyEasy to use buttons allow the user to manually select the battery type (sealed, flooded, gel or Lithium), change the temperature units, and reset the in-built counters (charging energy, min/max voltages)When not in use, the system automatically goes into a low power mode, reducing standby consumption when there is no solar power available, such as when the vehicle is parked in a garageCurrent limiting function (30A) allows the possibility of adding more solar panels to your solar system in the future This model is also compatible with a remote meter MT11 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings from an easy to use and install remote screen.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely. This allows the system to optimise the charging process for lead acid batteries or provide low temperature protection for lithium batteries. Controller specifications: The most advanced MPPT technology to ensure high efficiency (>95%) of your solar system Fully automated operation and auto 12/24V selection 3 pairs of terminals (solar panel, battery 1, battery 2) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 390W (12V) / 780W (24V) Temperature sensor for automatic compensation (-3mV/°C/2V) Comprehensive electronic protection features Communication port: RS485 interface Grounding: negative common ground Current limiting function (30A) Self-consumption: <26mA Working temperature: -30°C to +80°C Size: 243.7 x 158 x 63 mm Mounting dimensions: 180 x 156 mm Weight: 1.4 kg Multiple mounting holes (5mm diameter) for ease of installation

£117.99

20A 12V Dc To 12V Dc Automatic Multi-Stage Battery-To-Battery Charger With Solar Input For Lead Acid, Calcium Or Lithium-Ion Batteries

20A 12V Dc To 12V Dc Automatic Multi-Stage Battery-To-Battery Charger With Solar Input For Lead Acid, Calcium Or Lithium-Ion Batteries This powerful, high-quality battery to battery charger can charge a 12V battery from another 12V battery with its own power source, or from a solar panel using its built-in solar input, at up to 20A. The fully-automatic battery charger uses an intelligent, multi-stage charging program that can be set to a wide variety of battery types using easy, one-button programming and features a full suite of electronic protections. This system is ideal for caravans, campervans, motorhomes or boats, where the alternator charging can be shared between the starter and leisure batteries while the engine is running, then the leisure battery can be kept topped up from solar power while the vehicle is parked. By combining two chargers into one unit the set-up and operation are made simple, allowing you to easily share an existing charging source between two batteries or battery banks and utilise solar power to extend your off-grid runtime. Key Features: Powerful solar charge controller with overload protection: compatible with solar panel(s) up to 20A at 16-25V, automatically activates when there is no battery-to-battery charging. Fully-automatic, high-frequency, multi-stage charging: ensures the battery is charged safely and quickly. Pulsed charging keeps temperatures low and evens electrolyte consistency to ensure a long battery life. Easy battery type selection: with the push of a button, the unit can be switched between Lead Acid, AGM/Gel, Calcium, or Lithium-ion battery types. The unit remembers the battery type even without power, so there is no need to reprogram the unit if the battery supply is turned off. Safe unattended charging: the unit features inbuilt safety functions (protection against overload, overheating, overvoltage, over-discharge, short circuit, and reverse discharge of the battery), which allow the charger to be left permanently connected to the batteries for unattended automatic charging. Continued charging during battery/load use: the charger will continue to operate at full power whilst energy is drawn from the battery during use. The unit will maintain the charge if the battery is already at full capacity. Any 12V loads may also be left permanently connected and running whilst the DC-to-DC charger is in operation, and will be protected against overvoltage and voltage fluctuations. Ignition on/off control: by connection to the ignition control, this charger can be set to begin battery-to-battery charging immediately when vehicle ignition is turned on and stop charging when the vehicle is turned off. Deep discharge recovery: with a soft-start charging program and a minimum output battery voltage of only 2.5V, this charger is capable of recovering batteries from extremely high depth of discharge. Additional features: This charger also features LED indicators to show target battery charging stage, power source and selected battery type. Compatibility: This DC-to-DC battery charger is suitable for use with any 12V lead acid, AGM, Gel, Calcium or Lithium batteries. It is not compatible with 24V batteries or a combination of 12V and 24V batteries. Charger specifications: Battery input voltage: 12.5 - 16.0V Maximum charging current: 20A Solar input voltage: 16.0 - 25.0V Maximum solar input current: 20A Minimum output battery voltage: 2.5V Bulk charge voltage: 14.3V (AGM/Gel), 14.0V (Lead Acid), 15.0V (Calcium), 14.0V (Li-ion) Float charge voltage: 13.5V Float charge current: 100mA Battery capacity: 18 - 250Ah Dimensions (excluding cable): 21 x 13 x 4 cm Weight: 900g The product is covered by 1 year manufacturer warranty

...Read more View Product

£399.99

200Ah 12V Gel Deep Cycle Battery For Motorhomes, Caravans, Boats And Off-Grid Power Systems

What is a Gel battery? A gel battery is a type of Valve Regulated Lead Acid (VRLA) battery filled with special gel-type electrolyte. Gel batteries are non-spillable, completely sealed and maintenance free - one of the safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to less degradation and corrosion inside the battery. Gel batteries hold charge very well and have a much lower self-discharge rate. Other important benefits of gel batteries include: Better recovery from deep discharge Wider working temperature range (gel batteries work well even in cold temperatures as low as -10C) Their position doesn't have to be upright all the time These batteries have better resistance to shock and vibration Deep cycle means that this battery has been specially designed for applications which involve regular deep discharge. Such applications include using it as a leisure battery in caravans, motorhomes, campervans and boats, or energy storage in lighting systems, telecommunications, networking equipment and various types of off-grid power systems. This battery is also great for emergency power storage and UPS systems. This battery is a perfect choice for our solar charging kits due to its excellent solar charge acceptance. It is also ideal for various wind power systems or for combined solar and wind energy storage. The service life of this battery is more than 5 years, but if treated well the battery can last up to 10 years. The battery comes packaged in a carton box with a user manual and bolts/washers for terminals. Specifications: Nominal voltage: 12V Nominal capacity: 200Ah (10h rate) / 205Ah (20h rate) Maximum charging current: 40A Self-discharging rate: <1% per month Cycle lifetime at 30% D.O.D.: 1200-1300 Pressure control: safety valve installed Terminal type: F24 (bolts and washers included) Operating temperature: from -10C to +50C Size: 523 x 239 x 243 mm Weight: 61.5 kg

£37.29

Berker Anthracite Twin USB Charging Point (21238A)

12V Twin USB charging socket. Output voltage 5V. No data transmission possible. Black. Country of Manufacture Germany EAN/UPC 5019328012386 Shipping To Mainland UK Only Yes Manufacturer Berker Special Order Yes OEM Part Number 21238A

...Read more View Product

£32.99

Blue Sea 7721 BS7721 Fuse Block Safety SEA/AMG

MEGA® / AMG® Safety Fuse Block BS7721 Blue Sea 7721 Ignition protected for installation aboard gasoline or diesel powered boats Sealed cover protects fuses from the harsh marine environment Insulating cover satisfies ABYC/USCG insulation requirements Cover breakouts allow wire access in any direction 300A maximum with 4/0 cable Accepts Blue Sea Systems Square Format standard or custom label Fuses sold separately

£48.99

Blue Sea 5503 BS5503 Fuse Block ANL 35 to 750A /was 5003

ANL Fuse Block with Insulating Cover - 35 to 750A BS5503 Blue Sea 5503 Cover included Accepts 5/16" (M8) ring terminals For use on systems up to 32 Volts DC Swing out design allows replacement of the fuse without removing fasteners Stainless steel studs provide resistance to corrosion and high torquing for excellent electrical contact UL 94-V0 base resists high heat Insert molded studs ensure secure fuse mounting Insulating cover satisfies ABYC/USCG requirements Cover breakouts allow wire access in any direction Fuse sold separately

£6.99

Blue Sea 5251 Fuse MIDI 40A

Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Sold in packages of 2

...Read more View Product

£311.46

Victron Energy AGM Super Cycle Battery 12V 125Ah (M8) – BAT412112081

The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches. VRLA AGM: design life 7-10 years Features A truly innovative battery The AGM Super Cycle batteries are the result of recent battery electrochemistry developments. The paste of the positive plates is less sensitive to softening, even in case of repeated 100% discharge of the battery, and new additives to the electrolyte reduce sulfation in case of deep discharge. Exceptional 100% depth of discharge (DoD) performance Tests have shown that the Super Cycle battery does withstand at least three hundred 100% DoD cycles. The tests consist of a daily discharge to 10,8V with I = 0,2C20, followed by approximately two hours rest in discharged condition, and then a recharge with I = 0,2C20. The two hours rest period in discharged condition will damage most batteries within 100 cycles, but not the Super Cycle battery. We recommend the Super Cycle battery for applications where an occasional discharge to 100% DoD, or frequent discharge to 60- 80% DoD is expected. Smaller and lighter An additional advantage of the new chemistry is a slightly smaller size and less weight compared to our standard deep cycle AGM batteries. Low internal resistance The internal resistance is also slightly lower compared to our standard deep cycle AGM batteries Brand Victron Energy Manufacturer Part Number BAT412112081 GTIN 8719076041832 Voltage 12V Battery Capacity (C20) 125Ah Cold Cranking 550CCA Terminal Type M8 Insert Terminal Layout Left Hand Positive Dimensions (Including Terminals) L330 x W171 x H214mm Weight 33Kg Warranty 2 Years Country of Manufacture China Battery Technology AGM

...Read more View Product

£180.99

Victron Energy Blue Smart IP22 Charger 24V 16A 1 Output – BPC241647022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC241647002 GTIN 8719076052470 Voltage 24V Charge Current 16A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£79.99

High Efficiency 10A Dual Battery Mppt Solar Charge Controller With Lcd Display For Solar Panels Up To 130W (12V Battery System) / 260W (24V Battery System)

Dual Battery ChargingThis advanced 10A 12V/24V dual battery solar controller uses advanced MPPT technology to charge two independent batteries or battery banks. The main battery is charged at high power, while a secondary battery is given a trickle charge of up to 1A. This makes it a perfect solar controller for a campervan, motorhome, boat or any other system with 2 batteries (e.g. engine and leisure battery). The main battery will be charged with a majority of the power, whilst the second battery will be trickle charged to keep it topped up and ready for use.Maximum Power Point Tracking (MPPT) TechnologyMPPT technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 60V. The maximum combined solar input power allowed for this controller is 130W for a 12V battery system or 260W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full Range of Protection Functions:This charge controller features a comprehensive set of electronic protection functions to prevent reverse current at night (from the battery back to the solar panel), over-charging, short circuit, reverse polarity and more. The solar controller case is water resistant to a rating of IP33 when installed, for protection against sprays of water at up to 60 degrees from vertical.Advanced Battery Compatibility:Unlike many other less advanced solar charge controllers, this model is 100% compatible with a broad range of battery types for the main battery, such as Gel, AGM, Lead-Acid Flooded, and Lithium (LiFePO4 or Li-NiCoMn) batteries.Advanced System Functionality:• The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel, system voltage recognition based on secondary battery)• Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for the solar panel and each battery), battery state of charge, and accumulated charging energy• Easy to use buttons allow the user to manually select the battery type (sealed, flooded, gel or Lithium), change the temperature units, and reset the in-built counters (charging energy, min/max voltages)• When not in use, the system automatically goes into a low power mode, reducing standby consumption when there is no solar power available, such as when the vehicle is parked in a garage• Current limiting function (10A) allows the possibility of adding more solar panels to your solar system in the future This model is also compatible with a remote meter MT11 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings from an easy to use and install remote screen.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely. This allows the system to optimise the charging process for lead acid batteries or provide low temperature protection for lithium batteries. Controller specifications: The most advanced MPPT technology to ensure high efficiency (>95%) of your solar system Fully automated operation and auto 12/24V selection 3 pairs of terminals (solar panel, battery 1, battery 2) for wires up to 4mm2 Maximum solar panel voltage 60V Maximum solar panel power 130W (12V) / 260W (24V) Temperature sensor for automatic compensation (-3mV/°C/2V) Comprehensive electronic protection features Communication port: RS485 interface Grounding: negative common ground Current limiting function (10A) Self-consumption: <12mA Working temperature: -30°C to +80°C Size: 227.2 x 143 x 58.1 mm Mounting dimensions: 160 x 134 mm Weight: 0.8 kg Multiple mounting holes (5mm diameter) for ease of installation

...Read more View Product

£355.99

Rolls Series 5 S12-160 AGM Deep Cycle Battery

Deep cycle refers to applications that typically discharge 60-80% of the battery capacity. The Rolls S Series S12-160 AGM Deep Cycle AGM battery features thick plates with a high density active material. This design allows for reserve energy to be stored deep within the battery plates and released during slow discharge. The Rolls AGM range are sealed, non hazardous and completely maintenance free and?will suit the customer looking for a long reliable, maintenance free service life. Rolls has designed a Deep Cycle VRLA battery with high reserve capacity, long cycle life and low internal resistance, while achieving superior cranking performance. Rolls AGM batteries are the smart choice for demanding renewable applications.They are designed and built differently than standard batteries. They use more lead, heavier plates and other proprietary materials that enable them to deliver more power and capacity over many life cycles. Specifications Weight 44 kg 97 lbs Length 34.1 cm 13.43" Width 17.2 cm 6.77" Height Inc. Term. 30.9 cm 12.17" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Nylon Strap Series AGM-S Warranty See Warranty Terms Volts 12 BCI SPEC Cells 6 Terminal Type DT Included Hardware Stainless Steel Nuts & Bolts Size & Thread DT Charge Charge Voltage Range 14.7V @ 25°C (77°F) Float Voltage Range 13.8V @ 25°C (77°F) Recommended Charge Current 30 A Maximum Charge Current 40 A Self-Discharge Rate Less than 2% per month at 25°C (77°F) Internal Resistance 3.6 mΩ Capacity Cold Crank Amps (CCA) 0°F / -18°C 795 Marine Crank Amps (MCA) 32°F / 0°C 950 Reserve Capacity (RC @ 25A) 260 Minutes Reserve Capacity (RC @ 75A) 75 Minutes Capacity Affect by Temperature 40°C(104°F) 25°C(77°F) 0°C(32°F) -15°C(5°F) 102% 100% 85% 65% Hour Rate Capacity / AMP Hour Current / AMPs @ 100 Hour Rate 160 AH 1.6 A @ 20 Hour Rate 145 AH 7.25 A @ 10 Hour Rate 126 AH 12.6 A @ 5 Hour Rate 115 AH 23 A Cut Off Voltage Constant Current Discharge VPC 1 hr 2 hr 3 hr 5 hr 8 hr 10 hr 76.9 44.3 31.8 22.7 15.3 12.6 View all Rolls Batteries

...Read more View Product

£35.19

Sterling Split Charge Diode - 70A 1 in 2 out

Sterling has developed a range of low cost split charge diodes. These diodes have enhanced performance over conventional diodes and at a lower cost. The difference is in the devices. All other split charge diode manufacturers use conventional alternator diodes, which at low current flow have about a 0.93 voltage drop. When the full rated current of these diodes is approached, the voltage drop increases to about 0.95 volts. Specification: Alt Input: 1 Battery Banks: 2 Output: 70A For cable information for all Sterling Products click here

...Read more View Product

£92.27

Blue Sea 3000 BS3000 Switch Battery HD Series ON/OFF

HD-Series Heavy Duty On-Off Battery Switch BS3000 Blue Sea 3000 Switches a single battery to a single load group Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Accepts two 4/0 AWG (95mm²) battery cables

...Read more View Product

£35.99

Blue Sea 2151 Fuse Block TERMINAL 30-300A Dual

Compact, high-amp fuse?appropriate for DC Main, inverter, windlass, and bow thruster circuit protection. Provides high current protection in tight space constraints. Ignition protected when used with Blue Sea Systems' MRBF Terminal Fuse. Isolated stud design uses standard M8 hardware and permits stacking of terminals. Insulating cap prevents accidental shorts. Accepts 5?16" ring terminals. Mounts on 3/8? terminal studs. Fuse sold separately

...Read more View Product

£72.50

VICTRON ENERGY CYRIX-LI-CT 12/24V 120A INTELLIGENT LI-ION BATTERY COMBINER – CYR010120412

The functionality of the Cyrix-Li-ct is analogous to the Cyrix-ct. The Cyrix-Li-ct will parallel connect a lead acid starter battery and a LiFePO4 battery: if the Charge Disconnect output of the VE.Bus BMS is high, and if it senses 13,4V (resp. 26,8V) or more on one of its power terminals The Cyrix will disengage immediately: when its control output becomes free floating, signalling cell over voltage or cell over temperature, and/or when battery voltage drops below 13,2V. Start assist function: a short positive pulse will close the relay during 30 seconds A built-in transient voltage suppressor will limit the voltage spike that may occur when the Cyrix suddenly disengages due to cell overvoltage or over temperature. Brand Victron Energy Manufacturer Part Number CYR010120412 Voltage 12/24 Continuous current & Breaking capacity at 12V or 24V 120A Current Consumption When Open 4 mA Protection Category IP54 Dimensions H46 x W46 x D80mm Weight (kg) 0.11 Warranty 5 Years

...Read more View Product

£306.00

Victron Energy VE Transfer Switch 5KVA, 1ph, 200-250Vac – COS230502100

The COS230502100 VE Transfer Switch automatically switches between different power sources: between a generator and shore power, between an inverter and a generator, or between an inverter and shore power. The VE Transfer Switch has two inputs and one output, it automatically transfers the available AC power to the output. GTIN 8719076022091 Warranty 5 Years Country of Manufacture Slovenia

...Read more View Product

£890.00

Victron Energy LiFePO4 Battery 12.8V 100Ah Smart – BAT512110610

The Victron Energy 100Ah Smart Battery With integrated cell balancing Can be parallel and series connected Bluetooth app available to monitor cell voltage and temperature Requires one of these BMS-es: VE.Bus BMS – recommended for systems with our inverter/chargers. smallBMS – recommended for use in small systems. Battery Management System BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS CL 12/100 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Lynx Smart BMS – recommended for use in large systems. Features of the 100Ah Smart Battery RuggedA lead-acid battery will fail prematurely due to sulfation:• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid.Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for demanding applications. EfficientIn several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead acid battery is 80%.The round-trip energy efficiency of a LFP battery is 92%.The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state).In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions. Size and weightSaves up to 70% in spaceSaves up to 70% in weight Expensive?LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency. BluetoothWith Bluetooth cell voltages, temperature and alarm status can be monitored.Very useful to localize a (potential) problem, such as cell imbalance. The 100Ah Smart battery is equipped with Bluetooth and uses this to communicate with the VictronConnect app. The VictronConnect app can be used for:• Monitoring the battery status• Monitoring the battery voltage• Monitoring the battery temperature• To find out when the battery was last fully charged• Monitoring the cell balancing status• Monitoring the individual cell voltages• To view or change the battery settings• To update the battery firmware Brand Victron Energy Manufacturer Part Number BAT512110610 GTIN 8719076043041 Voltage 12.8V Battery Capacity (C20) 100Ah Terminal Type M8 Terminal Layout Right Hand Positive Dimensions (Including Terminals) H197 x W321 x D152mm Weight 14Kg Warranty 3 Years Country of Manufacture China Battery Technology Lithium Battery Application Deep Cycle

...Read more View Product

£349.99

Victron Energy SmartSolar MPPT 150V 70A Tr VE.Can – 150/70 SCC115070411

Victron Energy SmartSolar MPPT 150V 70A Tr VE.Can – 150/70 SCC115070411 The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC115070411 GTIN 8719076050322 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£515.99

TN Power AGM 12V 230Ah Deep Cycle Battery

230Ah AGM Deep Cycle Leisure Battery TNE Series, TN’s most powerful products, are specially designed for deep cycle application. With numbers of national patent technologies, the cycle life reaches 400-600 cycles at 100% DOD, highly suitable for golf carts, electric wheelchairs, low-speed electric vehicles etc. Maintenance free technology reduce the complexity with water adding during use and become more and more popular in the market. Features Maintenance Free VRLA battery, no need to add water or acid during application. Longer cycle life: 400-600 cycles at 50% DOD. Higher capacity: Patented structure design with high utilization of active material, maximum improve the utilization rate of active material and the utilization ratio of battery internal space, 5%-10% higher capacity than similar products in the market. High performance for large current discharge. New structure for plate grid, greatly reduced resistance of the battery, uniform internal electrochemical reaction under large current discharge, excellent capacity recovery from deep discharge Good corrosion resistance of grid. Unique patent alloy with rare earth material, the grid has super corrosion resistance and creep resistance High performance under low temperature. With added conductive material and cryogenic expansion agent of high activity to the plate, the product is of strong accept ability under low temperature. Safety & reliability. Independent designed automatic anti-dry and removable safety valve for convenient common check as well as the sealing function to reduce water loss in the process of charge and discharge and to improve reaction efficiency of sealing. Application Electric Tricycle Low speed electric vehicles Golf trolleys and golf cart Patrol cars Electric Sight-seeing Tour Bus Sweeper Electric Wheelchairs Lawn mowers etc

...Read more View Product

£242.99

Rolls Series 5 S12-116 AGM Deep Cycle Battery

Deep cycle refers to applications that typically discharge 60-80% of the battery capacity. The Rolls S Series S12-116 AGM Deep Cycle AGM battery features thick plates with a high density active material. This design allows for reserve energy to be stored deep within the battery plates and released during slow discharge. The Rolls AGM range are sealed, non hazardous and completely maintenance free and?will suit the customer looking for a long reliable, maintenance free service life. Rolls has designed a Deep Cycle VRLA battery with high reserve capacity, long cycle life and low internal resistance, while achieving superior cranking performance. Rolls AGM batteries are the smart choice for demanding renewable applications.They are designed and built differently than standard batteries. They use more lead, heavier plates and other proprietary materials that enable them to deliver more power and capacity over many life cycles. Specifications Weight 30 kg 66 lbs Length 30.7 cm 12.09" Width 16.9 cm 6.65" Height Inc. Term. 23.7 cm 9.33" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Rope / Plastic Handle Series AGM-S Warranty See Warranty Terms Volts 12 BCI Grp 27 Cells 6 Terminal Type DT Included Hardware Stainless Steel Nuts & Bolts Size & Thread DT Charge Charge Voltage Range 14.7V @ 25°C (77°F) Float Voltage Range 13.8V @ 25°C (77°F) Recommended Charge Current 20 A Maximum Charge Current 35 A Self-Discharge Rate Less than 2% per month at 25°C (77°F) Internal Resistance 4 mΩ Capacity Cold Crank Amps (CCA) 0°F / -18°C 680 Marine Crank Amps (MCA) 32°F / 0°C 900 Reserve Capacity (RC @ 25A) 180 Minutes Reserve Capacity (RC @ 75A) 43 Minutes Capacity Affect by Temperature 40°C(104°F) 25°C(77°F) 0°C(32°F) -15°C(5°F) 102% 100% 85% 65% Hour Rate Capacity / AMP Hour Current / AMPs @ 100 Hour Rate 116 AH 1.16 A @ 20 Hour Rate 105 AH 5.25 A @ 10 Hour Rate 95 AH 9.5 A @ 5 Hour Rate 86 AH 17.2 A Cut Off Voltage Constant Current Discharge VPC 1 hr 2 hr 3 hr 5 hr 8 hr 10 hr 59.6 31.6 23.7 17.2 11.4 9.5 View all Rolls Batteries

...Read more View Product

£179.00

Victron Energy BlueSolar MPPT Solar Charge Controller 150/45-Tr – SCC115045222

Victron Energy BlueSolar MPPT Solar Charge Controller 150/45-Tr – SCC115045222 The Victron 150V 45A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring. Ultrafast MPPT Technology: This 45A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array. Inbuilt safety protection: Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring: The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including: Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge. Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters. User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings. The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops. Other features: The Victron BlueSolar MPPT 150-45 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating. This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Specifications: - The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36 / 48V selection*- 2 pairs of terminals (solar panel, battery) for wires up to 35mm2- Max solar panel voltage: 150V- Max solar panel power: 600W (12V) / 1300W (24V) / 1950W (36V) / 2600W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -48mV / -64mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: <35mA (12V) / <20mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 185 x 250 x 95 mm- Mounting dimensions: 225 x 81 mm- Weight: 3kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£49.99

Blue Sea 9002E BS9002E Switch Battery e-Series Selector 4 Position Red With AFD

e-Series Selector Battery Switch with AFD BS9002e Blue Sea 9002E Switches isolated battery banks to all loads or combines battery banks to all loads Includes AFD (Alternator Field Disconnect) Make-before-break contact design allows switching between battery banks without power interruption Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting View all Blue Sea e-Series Battery Switches

£211.81

Blue Sea 7702 BS7702 Solenoid ML 500A 24V RBS With Manual ControlCont (incl 2145-BSS Switch)

ML-RBS Remote Battery Switch with Manual Control - 24V DC 500A BS7702 500 Amp magnetic latching switch provides high amperage switching under load, manually or from remote locations Manual override knob provides an added level of safety allowing control with or without power and offering LOCKED OFF capability for servicing LED output to remotely indicate switch state - requires optional LED 3? 8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance 7? 8" (22 mm) stud length accepts multiple cable terminals Label recesses for circuit identification Silver alloy contacts provide high reliability for switching live loads

Blue Sea 5180 BS5180 Fuse Terminal 75A

MRBF Terminal Fuse - 75A BS5180 Blue Sea 5180 Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151—do not mount the fuse directly to the battery terminal Interrupt rating satisfies ABYC requirements for DC Main circuit protection on large battery banks Ignition protected—safe for installation aboard gasoline powered boats Clear window—visual indication of blown condition Color coded for each amperage

Blue Sea 5117 Fuse A3T/Class T 225A

Extremely fast short-circuit response. 20,000 Ampere Interrupt Capacity (AIC)

...Read more View Product

Best Seller

£50.96

Blue Sea 5029 Fuse Block ST Blade 12 Circuits with Cover

Consolidates branch circuits and in-line fuses Positive distribution bus with #10-32 stud. Can be used for 24-hour circuits. Models available with or without a cover. Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems" Small Format Labels for circuit identification. . Tin-plated copper buses and fuse clips. Accepts ring or snap fork type terminals. Accepts ATO® and ATC® fast acting blade fuses. Fuses sold separately These units are not supplied with labels

£8.95

Berker 13 Amp Socket Colour Anthracite W4 21221A

Berker 13 Amp Socket Colour Anthracite W4 21221A The Berker mains sockets are being fitted more and more on the new modern Caravan. However you can easily add a Berker Caravan Socket to and existing caravan or motorhome if you have the electrical knowledge. There are matching covers and some coming with lids. So if you are replacing a broken one or just adding a new one the Berker Range of fitting from W4 are all you need.

£156.99

40A 12V Intelligent automatic multi-stage mains battery charger

This 40A 12V automatic multi-stage mains battery charger is designed to enable safe and efficient unattended charging of a 12V battery or battery bank from a mains power source (220-240V AC). This mains charger boasts an advanced 7 stage charging process which delivers faster and more efficient charging, whilst eliminating the risk of voltage fluctuations. This unit is able to charge either a single 12V battery, or several 12V batteries connected in parallel (batteries must be the same type, capacity and age). This mains battery charger is compatible with Lead Acid batteries, including AGM, Gel and Wet cell batteries. Key features: Safe unattended charging: the unit features inbuilt safety functions (protection against DC short circuit, overheating, overcharging and reverse polarity of the battery), which allow the charger to be left permanently connected to the battery for unattended automatic charging. Unlike many other mains chargers, the charging voltage is also free from peaks which offers smooth uninterrupted charging. Continued charging during battery use: the charger will continue to operate while energy is drawn from the battery during use. The unit will maintain the charge if the battery is already at full capacity. Boost-charging feature: this preliminary charging stage can improve battery condition and recover lost capacity from older batteries. It improves the charge delivered to the batteries, thereby increasing battery life and preventing premature battery failure. Dead battery recovery: the desulphation stage is able to break down sulphation that occurs in batteries which have been left flat for extended periods of time, returning them back to full charge. Automatic temperature control: to maintain an optimal internal temperature, the inbuilt fan is automatically enabled when a high temperature or charging current is detected. LCD Display: shows vital information regarding the charging process (charging voltage / charging current / different charging stages). LED lights also indicate the battery type. Power pack function: can provide a direct supply of power to a 12V load (e.g. 12V fridge) with no battery connected (e.g. during battery replacement). This charger is also supplied with a 1.5m mains AC cable with a UK 3-pin plug, battery cables, and spare fuses. Operating Voltage range (AC): 190V - 265V (full capacity) / 50 Hz DC output current: 40A DC output voltage: 12V Suggested battery capacity: 40 - 300Ah Bulk / absorption charging voltage: 14.2V - 14.8V DC (depending on the battery type) Float charging voltage: 13.2V - 13.8V (depending on the battery type) Efficiency: <88% Operating temperature range: 0°C - 40°C Inbuilt fan Isolated DC output Dimensions: 226 x 175 x 95 mm Weight: 2.4 kg

...Read more View Product

£899.00

Lithium Leisure Battery - Fogstar Drift 24v 230Ah

The Drift 24V 230Ah LiFePO4 Leisure Battery offers an incredible 5888Wh, great cycle life, low environmental impact, and a superb 10 year warranty. Manufactured using Grade A EVE LiFePO4 Lithium cells, high discharge JBD BMS, built in Bluetooth and Heating as standard - our new Lithium Leisure Battery collection offers everything you’d expect in a premium product. Download the Fogstar Drift App, this enables you to access real-time data about your Lithium Leisure Battery at all times. The Fogstar Drift app is free to download on both Android and iOS.The new Fogstar Drift 24v 230Ah Lithium Leisure Battery can be used across a wide range of applications, from solar energy storage to campers and caravans, marine and boating. TECHNICAL SPECIFICATION Nominal Capacity 230Ah Nominal Voltage 25.6V Recommended Charge Voltage 29.2V Max Cont. Discharge 200A L(522mm) x H (218mm) x W (245mm) Cell Assembly 8S1P Weight 39.5Kg The Fogstar Drift terminals are all M8 in size, 1.25 pitch, 12mm. All of our Drift Leisure batteries come with bolts and terminal posts as standard.

£1,442.00

Victron Energy LiFePO4 Battery 12,8V 330Ah Smart - BAT512132410

The Victron Energy 330Ah Smart Battery With integrated cell balancing Can be parallel and series connected Bluetooth app available to monitor cell voltage and temperature Requires one of these BMS-es: VE.Bus BMS – recommended for systems with our inverter/chargers. smallBMS – recommended for use in small systems. Battery Management System BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS CL 12/100 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Lynx Smart BMS – recommended for use in large systems. Features of the 330Ah Smart Battery RuggedA lead-acid battery will fail prematurely due to sulfation:• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid.Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for demanding applications. EfficientIn several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead acid battery is 80%.The round-trip energy efficiency of a LFP battery is 92%.The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state).In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions. Size and weightSaves up to 70% in spaceSaves up to 70% in weight Expensive?LFP batteries are expensive when compared to lead acid But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency. BluetoothWith Bluetooth cell voltages, temperature and alarm status can be monitored.Very useful to localize a (potential) problem, such as cell imbalance. The 330Ah Smart battery is equipped with Bluetooth and uses this to communicate with the VictronConnect app. The VictronConnect app can be used for:• Monitoring the battery status• Monitoring the battery voltage• Monitoring the battery temperature• To find out when the battery was last fully charged• Monitoring the cell balancing status• Monitoring the individual cell voltages• To view or change the battery settings• To update the battery firmware Brand Victron Energy Manufacturer Part Number BAT512132410 GTIN 8719076054849 Voltage 12.8V Battery Capacity (C20) 330Ah Terminal Type M10 Terminal Layout Left Hand Positive Dimensions (Including Terminals) H347 x W425 x D274mm Weight 51Kg Warranty 3 Years Country of Manufacture China Battery Technology Lithium Battery Application Deep Cycle

£124.00

NDS Energy Sun Control 2 12V 360W MPPT With N-Bus - SCE360

SUNCONTROL2 is the latest and most innovative charge regulator from NDS. The MPPT technology allows to optimize the energy from any solar panel, performing the most modern charging curves, for batteries always charged and efficient over time. Solid and functional thanks to the professional terminal block and equipped with updated communication protocols LIN-BUS / CI-BUS, SUNCONTROL2 is ideal for an installation destined to last over time. Available in two different versions: SC320M with input for two panels up to 320W (without cooling fan) and SC350M which supports up to 350W. The charge regulator is the heart of the photovoltaic system, choosing suncontrol2 means making the most of all the potential of today and the future Main Features: Temperature Sensor Latest Generation Lin-Bus/Ci-Bus Communication Protocols Professional Terminal Block Recharge Starting Battery 5-Stages Charging Curves Desulphation System LED Charging Status Separate Input for Panel Nominal Voltage 12V Nominal Voltage Input 30A Maximum Charging Current 20A Module Max Power 320W MPPT System Yes Protection Fuse 30A Bluetooth No Dimensions L151 x W90 x D48mm Warranty 2 Years

£154.95

Victron Energy Blue Smart IP65 Charger 12V 15A 1 Output UK – BPC121531024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC121531024R GTIN 8719076039761 Voltage 12V Charge Current 15A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H60 x W105 x D190mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£404.99

Victron Energy SmartSolar MPPT 150V 85A Tr VE.Can – 150/85 SCC115085411

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC115085411 GTIN 8719076050339 Voltage 12/24/48V Rated Charge Current 85A Nominal PV Power, 12V 1200W Max. PV Short Circuit Current 70A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£171.00

Victron Blue Smart IP67 24/12(1) Battery Charger 24V 12A BPC241247026

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on

...Read more View Product

£35.99

Remote Meter/Display Mt11 With 5M Cable For 10A-30A Dm Series Dual Battery Mppt Solar Charge Controllers

This high quality, brand new remote display / monitor can be used with 10A - 30A dual battery MPPT solar charge controllers/regulators (DM series). The unit displays important charging parameters such as:Battery and solar panel voltagesBattery and solar panel currentBattery state of chargeAccumulated charge and discharge energyMinimum/maximum recorded voltageTemperature (of the controller, or of the battery using an optional external temperature sensor) This meter allows you to change battery type and capacity, temperature unit, and track and reset the accumulated energy counter.CompatibilityThis meter is only compatible with DM series dual battery MPPT solar controllers:High efficiency 10A dual battery MPPT solar charge controller with LCD display for solar panels up to 130W (12V battery system) / 260W (24V battery system)High efficiency 20A dual battery MPPT solar charge controller with LCD display for solar panels up to 260W (12V battery system) / 520W (24V battery system)High efficiency 30A dual battery MPPT solar charge controller with LCD display for solar panels up to 390W (12V battery system) / 780W (24V battery system) If you already have one of our DM series dual battery MPPT solar controllers, this remote meter can easily be added at any time to your system - simply connect the cable supplied with the meter to the RS485 socket of the controller.The removable frame allows for either flush or surface mounting. Specifications: Suitable for 10A-30A dual battery MPPT solar charge controllers DM Series Self-consumption: 4-13 mA (depending on backlight) Operating temperature: -20C to +70C Cable: RS485, 5m included Size (without frame): 98.4 x 98.4 mm (with frame): 114 x 114 mm Weight: 110g

...Read more View Product

£348.99

Rolls AGM Battery R12-200AGM

Specifications Weight 60 kg 132.5 lbs Length 52.2 cm 20.55" Width 24.0 cm 9.45" Height Inc. Term. 22.4 cm 8.82" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Rope Series AGM-R Warranty See Warranty Terms Volts 12 BCI 4D Cells 6 Terminal Type F8 Included Hardware Stainless Steel Nuts & Bolts Size & Thread M8 Charge Recommended Charge Current 40 A Maximum Charge Current 60 A Self-Discharge Rate Less than 2% per month at 25°C (77°F) Capacity Cold Crank Amps (CCA) 0°F / -18°C 1100 Marine Crank Amps (MCA) 32°F / 0°C 1380 Reserve Capacity (RC @ 25A) 380 Minutes Reserve Capacity (RC @ 75A) 100 Minutes Capacity Affect by Temperature 40°C(104°F) 25°C(77°F) 0°C(32°F) -15°C(5°F) 102% 100% 85% 65% Hour Rate Capacity / AMP Hour Current / AMPs @ 100 Hour Rate 220 AH 2.2 A @ 20 Hour Rate 200 AH 10 A @ 10 Hour Rate 162 AH 16.2 A @ 5 Hour Rate 144 AH 28.8 A Cut Off Voltage Constant Current Discharge VPC 1 hr 2 hr 3 hr 5 hr 8 hr 10 hr 103 55.1 40.8 28.8 19.6 16.2

...Read more View Product

£214.99

Rolls Series 5 S12-95 AGM Deep Cycle Battery

Deep cycle refers to applications that typically discharge 60-80% of the battery capacity. The Rolls S Series S12-95 AGM Deep Cycle AGM battery features thick plates with a high density active material. This design allows for reserve energy to be stored deep within the battery plates and released during slow discharge. The Rolls AGM range are sealed, non hazardous and completely maintenance free and?will suit the customer looking for a long reliable, maintenance free service life. Rolls has designed a Deep Cycle VRLA battery with high reserve capacity, long cycle life and low internal resistance, while achieving superior cranking performance. Rolls AGM batteries are the smart choice for demanding renewable applications.They are designed and built differently than standard batteries. They use more lead, heavier plates and other proprietary materials that enable them to deliver more power and capacity over many life cycles. Specifications Weight 23 kg 50.5 lbs Length 26 cm 10.24" Width 16.9 cm 6.65" Height Inc. Term. 23.7 cm 9.33" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Rope / Plastic Handle Series AGM-S Warranty See Warranty Terms Volts 12 BCI Grp 24 Cells 6 Terminal Type DT Included Hardware Stainless Steel Nuts & Bolts Size & Thread DT Charge Charge Voltage Range 14.7V @ 25°C (77°F) Float Voltage Range 13.8V @ 25°C (77°F) Recommended Charge Current 15 A Maximum Charge Current 25 A Self-Discharge Rate Less than 2% per month at 25°C (77°F) Internal Resistance 5.5 mΩ Capacity Cold Crank Amps (CCA) 0°F / -18°C 500 Marine Crank Amps (MCA) 32°F / 0°C 800 Reserve Capacity (RC @ 25A) 155 Minutes Reserve Capacity (RC @ 75A) 34 Minutes Capacity Affect by Temperature 40°C(104°F) 25°C(77°F) 0°C(32°F) -15°C(5°F) 102% 100% 85% 65% Hour Rate Capacity / AMP Hour Current / AMPs @ 100 Hour Rate 95 AH 0.95 A @ 20 Hour Rate 85 AH 4.25 A @ 10 Hour Rate 77 AH 7.7 A @ 5 Hour Rate 70 AH 14 A Cut Off Voltage Constant Current Discharge VPC 1 hr 2 hr 3 hr 5 hr 8 hr 10 hr 43.8 25.6 19.2 13.9 9.2 7.7 Specifications Weight 23 kg 50.5 lbs Length 26 cm 10.24" Width 16.9 cm 6.65" Height Inc. Term. 23.7 cm 9.33" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Rope / Plastic Handle View all Rolls Batteries

...Read more View Product

£107.73

Blue Sea 7149 BS7149 Circuit Breaker 187 Surface Mount 200A

187-Series Circuit Breaker - Surface Mount 200A BS7149 Blue Sea 7149 Combines switching and circuit protection into a single device* Clear, single lever operation "Trip Free" design cannot be held "ON" during fault current condition Waterproof Recessed mounting holes for clean appearance Large Clearance around terminal studs accept heavy gauge wire lugs Robust 5/16 M8 terminals provide high torque connections Large lever with vertical/horizontal orientation provides indication of trip status Ignition protected - Safe for installation aboard gasoline powered boats Meets SAE J1171 external ignition protection requirements * Do not use as a switch where high inrush currents are expected.

£67.89

Blue Sea 5510E BS5510E Switch Battery e-Series Dual Circuit

e-Series Dual Circuit Battery Switch BS5510e Blue Sea 5510E Simultaneously switches two isolated battery banks Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting View all Blue Sea e-Series Battery Switches

Blue Sea 5103 BS5103 Fuse MEGA 150A/32V

MEGA® / AMG® Fuse - 150 Amp BS5103 Blue Sea 5103 Most economical fuse for 100-300 Ampere circuit protection For use with Blue Sea Systems' MEGA®/AMG® Fuse Block

...Read more View Product

£3.84

Blue Sea 2404 BS2404 Terminal Block/Independent 4 Circuits 20A

Terminal Block 20A - 4 Circuit BS2404 Blue Sea 2404 Closed back design completely insulates power from the mounting surface Each screw pair is one isolated circuit Jumpers allow creation of common circuits

...Read more View Product

£56.08

Blue Sea 11001 Switch Battery e-Series Selector 3 Position with AFD

Switch Battery e-Series Selector 3 Position with AFD Blue Sea PN 11001 Switches a single battery to a single load group Includes AFD (Alternator Field Disconnect) Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting View all Blue Sea e-Series Battery Switches

£186.99

Victron Energy Orion-Tr 12/24V 15A (360W) Isolated DC-DC Converter – ORI122441110

Remote on-offThe remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual) Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel IP43 protectionWhen installed with the screw terminals oriented downwards Screw terminalsNo special tools are needed for installation. Input fuseOn 12V and 24V input models only. Brand Victron Energy Manufacturer Part Number ORI122441110 gtin 8719076038832 Voltage 12/24V Cont. Output Current 15A Protection Category IP43 Efficiency 88% Bluetooth Enabled No Dimensions H130 x W186 x D80mm Weight 1.8Kg Warranty 5 Years

...Read more View Product

£305.99

Sterling Power BB1240 Bidirectional Battery-To-Battery Charger - 12V/12V 40A

Empower Your DC to DC charging Experience with the Sterling Power BB1240 Bidirectional Battery-To-Battery Charger The Sterling Power BB1240 Bidirectional Battery-To-Battery Charger is a cutting-edge solution designed to ensure your batteries are always charged and ready to deliver optimal performance. Unmatched Charging Efficiency The Sterling Power BB1240 offers a powerful 40A charge rate, ensuring your batteries are charged quickly and efficiently. Whether you’re dealing with starting batteries or deep-cycle batteries, this charger delivers a consistent and robust charge, maximizing battery life and performance. Its advanced technology ensures that your batteries receive the precise amount of power needed, avoiding overcharging and undercharging issues. Bidirectional Charging Capability One of the standout features of the BB1240 is its bidirectional charging capability. This means it can charge one battery from another, providing ultimate flexibility and redundancy in your power system. If your leisure battery is fully charged, the BB1240 can redirect power to your starter battery, ensuring both batteries are maintained at optimal levels. This feature is particularly valuable in emergency situations, providing peace of mind that you won’t be stranded with a dead battery. Versatile and User-Friendly The BB1240 is designed for versatility and ease of use. It is compatible with a wide range of battery types, including AGM, Gel, Flooded, and Lithium. This compatibility ensures that no matter what type of battery system you have, the BB1240 can integrate seamlessly. The user-friendly interface makes it easy to monitor and control the charging process, giving you complete control over your power management. Enhanced Battery Life Proper charging is crucial to extending the lifespan of your batteries. The BB1240 utilizes advanced charging algorithms that adapt to the specific needs of your batteries, reducing the risk of sulfation and other issues that can shorten battery life. By maintaining your batteries in peak condition, the BB1240 helps you get the most out of your investment, reducing the frequency and cost of battery replacements. Built for Reliability Sterling Power is renowned for its high-quality and reliable power solutions, and the BB1240 is no exception. Built with robust components and designed to withstand the harsh marine environment, this charger is built to last. Its durable construction ensures reliable performance in all conditions, making it an ideal choice for boating enthusiasts who demand the best. Safety First Safety is a paramount concern when dealing with electrical systems, and the BB1240 excels in this regard. It features comprehensive protection mechanisms, including over-temperature protection, over-voltage protection, and short-circuit protection. These safety features ensure that both your batteries and the charger are protected from damage, giving you confidence in your power system’s safety. Compact and Lightweight Design Space is often at a premium and the BB1240’s compact and lightweight design makes it easy to install without taking up valuable space. Its sleek design allows for flexible installation options, ensuring that you can fit it into your existing setup with minimal hassle. The Sterling Power BB1240 Bidirectional Battery-To-Battery Charger is a game-changer for boating & campervan enthusiasts looking to enhance their power management systems. Its unmatched charging efficiency, bidirectional capability, versatility, and reliability make it an indispensable tool for maintaining optimal battery performance. Investing in the BB1240 means investing in peace of mind, knowing that your batteries are in the best hands possible. Don’t let power issues dampen your adventures. Equip your vehicle with the Sterling Power BB1240 and experience the ultimate in battery charging technology. Ensure your time on the water is powered by reliability and efficiency – choose the Sterling Power BB1240 today. Features 4 stage DC-DC battery charging 40A Input - current limiting Bidirectional charging - enables starter battery charging 6 selectable charge profiles for all battery types including lithium 95-98% efficient using buck boost technology Compatible with both smart alternators (Euro 6) and standard alternators 3 charger control modes: Ignition | Vibration | Voltage Sense Automatically recoverable protection for various conditions (see 'Specifications' tab) Multiple units can be wired in parallel to increase output

£429.99

NDS Energy PWS GOLD 12V 40A 3 in 1 Hybrid Charger - DC to DC, MPPT & Battery Charger

NDS Energy PWS GOLD 12V 40A 3 in 1 Hybrid Charger - DC to DC, MPPT & Battery Charger The NDS Power Service Gold unit is a 3-in-1 hybrid charging system, ideal for use in motorhomes and campervans, and boats. It will take care of the leisure battery by charging from the alternator (when the engine is running), from a solar panel (up to 250W) and from 240V mains as well. It can be used with any kind of lead-acid battery - Gel, AGM, flooded acid and LiFePO4 lithium batteries. Charging is done in 5 stages including desulfation (not when set for lithium), ensuring a full recharge, as well as improving the battery's general performance and extending its life. Installation of the Power Service Gold charger is straightforward and detailed instructions are supplied. Technical journalist Peter Rosenthal installed a Power Service Gold charger in his self-built campervan and wrote about the installation in MMM, the UK's leading motorhome magazine. You can read the article by clicking on the link below. Suitable for use with "smart" alternators and lithium batteries. Features 40A DC-DC charger compatible with all alternator types (standard, Euro 5, Euro 6 +) 20A wide input voltage range (90-264V AC) mains charger Solar controller with 250W max. panel capacity 5-stage charging Fast and deep charging of leisure batteries Can be used with all lead-acid (flooded, sealed, AGM, gel etc.) and lithium batteries Selectable (via jumper) multi-stage charging profiles Auxiliary connection for existing systems (CBE, Sargent, Schaudt, Nordelettronica etc.) Engine and leisure batteries are kept separated to prevent accidental discharge Protection against over-temp, short circuit, reverse polarity, over-current, over-voltage, low-temp (lithium only) LED status indicators and audible warning User-replaceable fuses Supplied with 2-pin Euro to IEC power lead Specification Manufacturer's product code: GOLD 40-M MANUFACTURER: NDS Suitable for use with smart alternators?: Yes Input Voltage - Volts: 12 Output voltage - Volts: 12 Recommended minimum output of alternator- Amps: 110 Max. charging current - Amps: 40 Input: Alternator, solar panel and 230v mains Input from alternator - V: 11.8 - 15 Input from solar panel - V: 12 / 28v Conventional alternator cut-in: AUTOMATIC Max. Charging Current from Alternator: 40 Max. charging current from solar panel - Amps: 20 Max. charging current from 230V supply - Amps: 20 Charging characteristic: 5 stage with desulfation Suitable for battery size - Ah: 85 - 400 Suitable for battery types: All types of lead-acid battery inc. wet, AGM, Gel and Lithium LifePo4 Max. power input from solar panel - Watts: 250 Dimensions (L x W x H) - mm: 228 x 135 x 98 Product Net KG: 1.7 Warranty - years: 2 weight: 1.7

£213.49

Victron Energy Orion-TR SMART 24/24-17A (400W) Non-Isolated DC-DC Charger - ORI242440140

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downward. Screw terminals No special tools needed for installation. Input fuse (not replaceable) Brand Victron Energy Manufacturer Part Number ORI242440140 Input voltage range 20-35V Under voltage shut down 14V Under voltage restart 15V Nominal output voltage 24.2V Output voltage adjust range 20-30V Cont. output current at nominal output voltage and 40°C 17A Short circuit output current 40A Cont. output power at 25°C 480W Cont. output power at 40°C 400W Efficiency 89% DC connection Screw Terminals IP Rating IP43 Dimensions H130 x W186 x D80mm Weight 1.6Kg Warranty 5 Years

...Read more View Product

£73.19

Victron Energy Blue Smart IP65s Charger 12V 5A 1 Output UK – BPC120533024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC120533024R GTIN 8719076041214 Voltage 12V Charge Current 5A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H45 x W81 x D182mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£83.99

Sterling Power Remote Control with 10m Cable – BBURC

Displays: Voltage / Warnings / Temperatures. Can be used as an independent voltmeter measuring input battery voltage and output battery voltage. Can remotely modify the Batt. the Batt. Charger: Force the unit to float Force the unit to 1/2 current limit Force the unit to standby Force the unit off Force the unit to Night Mode Reset both Remote and Charger 54mm diameter

...Read more View Product

£359.99

Sterling Power Battery to Battery Charger, Non Waterproof 12/12V 60A – BB1260

Sterling’s range of Battery to Battery Chargers (B2Bs) has grown significantly over the past few years. Offering a product range in this market un surpassed by anyone in both power and flexibility. This is in an effort to supplement the ever growing demand from the commercial vehicle, recreational vehicle and marine industries. The B2Bs have become extremely popular as they fast charge batteries as you cruise along without the need for complex wiring, touching your alternator, voiding the alternator’s warranty and tampering with the electronic control units (ECUs). You can provide the onboard batteries with a fast 4 stage charging profile with a very simple and speedy installation. All of the benefits of advanced charging without any of the draw backs. Simply connect the B2B between the battery being charged and the battery you wish to charge. Features Multiple Activation Modes: Automatic for most non vehicle applications Manual for remote activation. Regenerative braking (requiring ignition feed), Automatic regenerative braking, requiring no ignition feed. Output charging at 12V, 24V, 36V and 48V. Input voltages at 12V and 24V, Up to 800W rating. Much larger model up to 3000W coming soon. Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mde allows you to override this. Safety features 100% fire proof plastic box. No screws to corrode. Thermal power reduction. Multi stage fan cooling Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down. Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages. B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V). Customizable Profile: Choose your own charging profile on the front panel. 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid. 4 stage battery charging: Thge B2B charges batteries between 5-20 times faster than a stand alone alternator. Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking). Remote control optional. DC to DC (Battery to Battery) Wiring Diagram, Information and Help Brand Sterling Power Manufacturer Part Number BB1260 DC V (in) 12 DC V (out) 12 Current (A) 60 Dimensions L190 x W160 x D70mm Weight (kg) 1.4 Warranty 2 Years

...Read more View Product

£222.99

Sterling Power 'Pro Batt Ultra' Battery to Battery Charger, Non Waterproof 12/12V 30A – BB1230

Sterling’s range of Battery to Battery Chargers (B2Bs) has grown significantly over the past few years. Offering a product range in this market un surpassed by anyone in both power and flexibility. This is in an effort to supplement the ever growing demand from the commercial vehicle, recreational vehicle and marine industries. The B2Bs have become extremely popular as they fast charge batteries as you cruise along without the need for complex wiring, touching your alternator, voiding the alternator’s warranty and tampering with the electronic control units (ECUs). You can provide the onboard batteries with a fast 4 stage charging profile with a very simple and speedy installation. All of the benefits of advanced charging without any of the draw backs. Simply connect the B2B between the battery being charged and the battery you wish to charge. Features Multiple Activation Modes: Automatic for most non vehicle applications Manual for remote activation. Regenerative braking (requiring ignition feed), Automatic regenerative braking, requiring no ignition feed. Output charging at 12V, 24V, 36V and 48V. Input voltages at 12V and 24V, Up to 800W rating. Much larger model up to 3000W coming soon. Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mde allows you to override this. Safety features 100% fire proof plastic box. No screws to corrode. Thermal power reduction. Multi stage fan cooling Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down. Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages. B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V). Customizable Profile: Choose your own charging profile on the front panel. 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid. 4 stage battery charging: Thge B2B charges batteries between 5-20 times faster than a stand alone alternator. Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking). Remote control optional. DC to DC (Battery to Battery) Wiring Diagram, Information and Help Brand Sterling Power Manufacturer Part Number BB1230 DC V (in) 12 DC V (out) 12 Current (A) 30 Dimensions L190 x W160 x D50mm Weight (kg) 1.2 Warranty 2 Years

...Read more View Product

£319.99

Victron Energy BlueSolar MPPT 150/70 MC4 – SCC010070300

Victron Energy BlueSolar MPPT 150/70 MC4 – SCC010070300 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98 %. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature (and current, in case of a BMV-712 or a SmartShunt) to one or more BlueSolar Charge Controllers. (VE.Direct Bluetooth Smart dongle needed) Real-time data display options Color Control GX or other GX devices: see the Venus documents on our website. A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC010070300 GTIN 8719076025528 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150 V absolute maximum coldest conditions, 145 V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H215 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£155.35

Victron Energy Blue Smart IP22 Charger 24V 12A 1 Output – BPC241242022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC241242002 GTIN 8719076037682 Voltage 24V Charge Current 12A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£419.00

TN Power Lithium 12V 84Ah Leisure Battery LiFePO4

84Ah Lithium Leisure Battery A huge advantage to lithium technology is the life cycle rating which far surpasses alternative technologies. This specific item has 7000 charge and discharge cycles at a depth of 50% Features Using the technology of lithium iron phosphate cell, superior safety, thousands of cycles, 100%DOD, under normal conditions Built-in automatic protection for over-charge, over discharge, over current and over temperature Free of maintenance Internal cell balancing Lighter weight: About 40% -50% of the weight of a comparable lead acid battery Can be charged using most standard lead-acid charges (set) Wider temperature range:-20°C-60°C Support for Series application expansion (up to 51.2V) and two in parallel Applications UPS Solar &Wind Power System Golf Cart Electric Vehicle , E-bike, E-rickshaw etc. Lighting Motorhomes Caravans Campervans Brand TN Power Manufacturer Part Number TN84 Voltage 12V Capacity (C20) 84Ah Terminal Type M8 Terminal Layout LH+ Dimensions (Including Terminals) L260 x W169 x H218mm Weight 10.2Kg Warranty 4 Years Battery Technology Lithium Battery Application Deep Cycle Country of Manufacture China

...Read more View Product

£88.99

High Efficiency 20A Mppt Solar Charge Controller For Solar Panels Up To 260W (12V) / 520W (24V) Up To 100V

MPPT Technology:This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined input solar power allowed for this controller is 260W for a 12V battery system or 520W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full system protection:This charge controller features a comprehensive set of electronic protection functions to ensure the maximum possible efficiency of your solar system. These include: reverse current prevention at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, solar panel over voltage, over load, short circuit and reverse polarity protection. The controller also has self-diagnostic capability and highlights any system errors using advanced fault-targeting technology. Lithium Battery charging:This solar charge controller is compatible with lithium batteries when a lithium battery charging program is selected using PC software (see below for more details).Advanced system monitoring:The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel)Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energyEasy to use buttons allow the user to manually select the battery type (sealed, flooded or gel) and program load settings (e.g. set timers for lighting, fans, pumps etc).Current limiting function (20A) allows the possibility of adding more solar panels to your solar system in the future Multiple connectivity optionsThis model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only). If using the RJ45 to USB cable, the user also has the option to create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and can also set the charging parameters for lithium batteries.Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. (Inbuilt temperature sensor is not enabled for lithium batteries). Controller specifications: The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system Fully automated operation and auto 12/24V selection 3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 260W (12V) / 520W (24V) Temperature sensor for automatic compensation (-3mV/°C/2V) Comprehensive electronic protection features Communication port: RS485/RJ45 interface Grounding: negative common ground Current limiting function (20A) Self-consumption: <12mA Working temperature: -25°C to +50°C Size: 22 x 15.4 x 5.2 cm Mounting dimension: 17 x 14.5 cm Weight: 0.94kg Multiple mounting holes (5mm diameter) for ease of installation

...Read more View Product

£55.99

High Efficiency 10A Mppt Solar Charge Controller For Solar Panels Up To 130W (12V) / 260W (24V) Up To 100V

MPPT Technology:This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined input solar power allowed for this controller is 130W for a 12V battery system or 260W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full system protection:This charge controller features a comprehensive set of electronic protection functions to ensure the maximum possible efficiency of your solar system. These include: reverse current prevention at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, solar panel over voltage, over load, short circuit and reverse polarity protection. The controller also has self-diagnostic capability and highlights any system errors using advanced fault-targeting technology. Lithium Battery charging:This solar charge controller is compatible with lithium batteries when a lithium battery charging program is selected using PC software (see below for more details).Advanced system monitoring:The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel)Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energyEasy to use buttons allow the user to manually select the battery type (sealed, flooded or gel) and program load settings (e.g. set timers for lighting, fans, pumps etc).Current limiting function (10A) allows the possibility of adding more solar panels to your solar system in the future Multiple connectivity options:This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only). If using the RJ45 to USB cable, the user also has the option to create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and can also set the charging parameters for lithium batteries.Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. (Inbuilt temperature sensor is not enabled for lithium batteries). Controller specifications: The most advanced MPPT technology to ensure high efficiency (>95%) of your solar system Fully automated operation and auto 12/24V selection 3 pairs of terminals (solar panel, battery, load) for wires up to 4mm2 Maximum solar panel voltage 100V Maximum solar panel power 130W (12V) / 260W (24V) Temperature sensor for automatic compensation (-3mV/°C/2V) Comprehensive electronic protection features Communication port: RS485/RJ45 interface Grounding: negative common ground Current limiting function (10A) Self-consumption: <12mA Working temperature: -25°C to +50°C Size: 17.2 x 13.9 x 4.4 cm Mounting dimensions: 13 x 13 cm Weight: 0.57 kg Multiple mounting holes (5mm diameter) for ease of installation

...Read more View Product

£33.99

Waterproof 10A 12V/24V Solar Charge Controller / Regulator For Caravans, Motorhomes, Campervans, Boat, Yacht And Marine Applications

This high quality waterproof 10A 12V/24V solar charge controller is designed to protect batteries whilst charging them, having automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, battery type selection, dual timer function and several load work modes.This controller can work with sealed, gel and flooded batteries (simpler controllers can only work with one battery type). In addition, it can accept a wide range of solar input voltage up to 50V, so this controller can work not only with standard off-grid solar modules, but also with on-grid panels which have higher voltage. The controller can handle up to 160W (with 12V batteries) / 320W (with 24V batteries) of solar panels, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a camper van or boat.In addition, the solar charge controller has a very high degree of water protection - IP67 (which means it's completely sealed), so it is absolutely safe to use this solar kit in all weather conditions.Further to the built-in temperature sensor there is an external temperature sensor located on the controller to measure the ambient temperature more precisely and optimise the charging process.This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings. Requires a RS485 to RJ45 cable to extend from controller to the remote meter.2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users). Requires an RS485 to RJ45 cable to extend from controller to the Wi-Fi module.3) An RS485 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.

£319.99

Victron Energy BlueSolar MPPT 150/70-Tr – SCC010070200

Victron Energy BlueSolar MPPT 150/70-Tr – SCC010070200 This Victron 150V 70A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 70A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 150-70 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Brand Victron Energy Manufacturer Part Number SCC010070200 GTIN 8719076025511 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150 V absolute maximum coldest conditions, 145 V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£22.49

Blue Sea 2202 BS2202 TermSm Feed Through 5/16-18 Stud Red

Terminal Feed Through Connector - 5/16"-18 Studs (Red) BS2202 Eliminates chafe and provides strain relief when passing high current through hulls, decks and bulkheads Perfect for passing high current cables through hulls, decks and bulkheads Large cables passed through holes are subject to chafing even when protective grommeting is used. Terminal Feed Through Connectors eliminate chafing and provide excellent strain relief for the cable Large size terminals have a mounting face that can be gasketed or bedded to provide a water tight installation Rated IP66 — withstands water from heavy seas

Blue Sea 5120 Fuse A3T/Class T 350A

Extremely fast short-circuit response. 20,000 Ampere Interrupt Capacity (AIC)

Blue Sea 5108 Fuse MEGA 300A/32V

Most economical fuse for 100-300 Ampere circuit protection. For use with Blue Sea Systems' MEGA?/AMG? Fuse Block

£149.99

Victron Energy Orion-Tr Smart 24/12V 20A (240W) Isolated DC-DC Charger – ORI241224120

Victron Energy Orion-Tr Smart 24/12V 20A (240W) Isolated DC-DC Charger – ORI241224120 The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number ORI241224120 gtin 8719076046080 Voltage 24/12V Cont. Output Current 20A Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 88% Bluetooth Enabled Yes Dimensions H130 x W186 x D70mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£299.99

Victron Energy Centaur Charger 12V 20A 3 Outputs - CCH012020000

The Centaur range of battery chargers features auto-ranging input covering 90-265VAC 50/60Hz input meaning they can be used anywhere in the world.Crucially, and unlike many other products that state universal input, the Centaur range will maintain full output power within the entire specified range. Other features include fully automatic three stage charge characteristic that ensures batteries are fully charged every time and three isolated charge outputs for multi battery configurations to suit the majority of typical installations.FeaturesQuality without compromiseAluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions.Universal 90-265V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation)All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz.The chargers also accept a 90-400 V DC supply.Three outputs that each can supply the full output currentThree isolated outputs to simultaneously charge 3 battery banks Each output is capable to supply the full rated current.Three-stage charging, with temperature compensationThe Centaur charges at bulk rate until the output has reduced to 70% of the rated Amps, at which a 4 hour timer begins. After the timed period the charger switches to float rate. An internal temperature sensor is used to compensate the charge voltage with – 2 mV/ºC (– 1 mV/ºF) per cell. A DIP switch is available to select the optimum charge/float voltages for Flooded Lead-acid, Gel or AGM batteries. GTIN 8719076021476 Voltage 12V Charge Current 20A Input Voltage 90-265V Number of Outputs 3 Bluetooth Enabled No Protection Category IP20 Dimensions H355 x W215 x D110mm Weight 3.8Kg Warranty 5 Years Country of Manufacture Malaysia

...Read more View Product

£39.99

Waterproof 15A 12V/24V MPPT solar charge controller for Caravans, Motorhomes, Campervans & Marine Applications

This high quality waterproof 15A 12V/24V solar charge controller is designed to protect batteries whilst charging them, with a full range of automatic protection features. The controller uses high efficiency MPPT charging technology to get the most possible power out of your solar panels. This controller stops reverse current (from the battery back to the solar panel) so your battery won't lose any charge at night and can be left permanently connected. It has many other protection functions such as over charge / discharge shut-off, over load and short circuit protection for the load terminals, overheating protection for the battery and more. This controller can work with sealed/AGM, gel and flooded/wet batteries. With a wide range of solar input voltages (up to 55V) this controller can work not only with standard off-grid solar modules, but also with on-grid panels which have higher voltage. The controller can accept up to 200W (in a 12V system) or 400W (in a 24V system) of solar panels which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a camper van or boat. In addition, the solar charge controller is completely sealed with a very high degree of water protection. It is absolutely safe to use this solar controller in all weather conditions. With the remote IR programmer (purchased separately), this controller can be wirelessly monitored and adjusted. The controller has a fully programmable timer with dimmer functionality, which monitors the dusk and dawn times based on the solar panel voltage and can adjust the percentage power of the load in 5 independently timed stages, making this controller ideal for outdoor lighting systems. Controller specifications: Protection rating: IP67 Default charging program: Gel Current rating: 15A Max solar input power: 200W (12V system) / 400W (24V system) Max solar input voltage: 55V Self-consumption: 6mA Ambient conditions: -35 – +60°C, 0 – 100% RH humidity, <4000m altitude Dimensions: 85.8 x 145 x 30 mm Weight: 600g Mounting holes for ease of installation

...Read more View Product

£1,099.00

Lithium Leisure Battery - Fogstar Drift 24v 280Ah

Elevate your off-grid adventures with the industry-leading Fogstar Drift 24V 280Ah Lithium Leisure Battery, a powerhouse that delivers an exceptional 7,168Wh of energy. This remarkable battery boasts an astounding cycle life of 8,000 cycles at 80% depth of discharge (DOD), ensuring years of reliable performance. Further solidifying its position as a premier choice, the Fogstar Drift 24V battery features a generous 10-year warranty, a testament to our commitment to quality and durability. Crafted with premium Grade A EVE V3 LF280K Cells, and incorporating a high-discharge 200A JBD BMS, the Fogstar Drift 24V 280Ah Lithium Leisure Battery sets a new benchmark for performance, reliability and efficiency. The integrated heating capabilities provide enhanced control and protection, while the user-friendly Fogstar Drift App, available free for Android and iOS devices, offers real-time access to battery data, ensuring complete monitoring and control. This versatile power solution seamlessly caters to a wide range of applications, including solar energy storage, campervans and caravans, marine and boating, and golf carts. Its scalability allows you to connect up to 4 Drift batteries in series or parallel, effortlessly expanding your power capacity to meet your specific needs. TECHNICAL SPECIFICATION Nominal Capacity 280Ah Nominal Voltage 25.6V Recommended Charge Voltage 29.2V Max Cont. Discharge 200A L(640mm)*W(245mm)*H(220mm) Cell Assembly 8S1P Weight 50Kg The Fogstar Drift terminals are all M8 in size, 1.25 pitch, 12mm. All of our Drift Leisure batteries come with bolts and terminal posts as standard.

...Read more View Product

£682.99

Victron Energy Lithium SuperPack 12,8V 100Ah (M8) High Current – BAT512110710

Victron Energy Lithium SuperPack 12,8V 100Ah (M8) High Current – BAT512110710 The SuperPack batteries are extremely easy to install, not needing any additional components.The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. The batteries can be connected in parallel. Series connection is not allowed. Features Integrated BMS and safety switch The SuperPack batteries are extremely easy to install, needing no additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. Abuse proof A lead-acid battery will fail prematurely due to sulfation: If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged). If it is left partially charged or worse, fully discharged. A Lithium-Ion battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of Li-ion compared to lead-acid. The SuperPack batteries will cut-off the charge or discharge current when the maximum ratings are exceeded. Efficient In several applications (especially off-grid solar), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%. The round-trip energy efficiency of a Li-ion battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy are required (battery operating in 70% to 100% charged state). In contrast, a Li-ion battery will still achieve 90% efficiency even under shallow discharge conditions. Can be connected in parallel The batteries can be connected in parallel. Series connection is not allowed. Use in upright position only. Brand Victron Energy Manufacturer Part Number BAT512110710 gtin 8719076053019 Voltage 12.8V Battery Capacity (C20) 100Ah Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) H220 x W330 x D172mm Weight 14Kg Warranty 3 Years Battery Technology Lithium Battery Application Deep Cycle Country of Manufacture China

...Read more View Product

£159.99

Victron Energy Lithium SuperPack 12.8V 20Ah (M5) - BAT512020705

Victron Energy Lithium SuperPack 12.8V 20Ah (M5) - BAT512020705 The SuperPack batteries are extremely easy to install, not needing any additional components.The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. The batteries can be connected in parallel. Series connection is not allowed. Features Integrated BMS and safety switch The SuperPack batteries are extremely easy to install, needing no additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. Abuse proof A lead-acid battery will fail prematurely due to sulfation: If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged). If it is left partially charged or worse, fully discharged. A Lithium-Ion battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of Li-ion compared to lead-acid. The SuperPack batteries will cut-off the charge or discharge current when the maximum ratings are exceeded. Efficient In several applications (especially off-grid solar), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%. The round-trip energy efficiency of a Li-ion battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy are required (battery operating in 70% to 100% charged state). In contrast, a Li-ion battery will still achieve 90% efficiency even under shallow discharge conditions. Can be connected in parallel The batteries can be connected in parallel. Series connection is not allowed. Use in upright position only. Brand Victron Energy Manufacturer Part Number BAT512020705 gtin 8719076047537 Voltage 12.8V Battery Capacity (C20) 20Ah Terminal Type M6 Terminal Layout Right Hand Positive Dimensions (Including Terminals) H167 x W181 x D77mm Weight 3.5Kg Warranty 3 Years Battery Technology Lithium Battery Application Deep Cycle Country of Manufacture China

...Read more View Product

£850.00

LithiumPro 150AH ARCTICXTREME Lithium Leisure Battery

LithiumPro 150AH ARCTICXTREME Lithium Leisure Battery Introducing the 12v 150AH Lithium Battery from LithiumPro Energy: The premium range from Lithium Pro Energy, the ARCTICXTREME with SmartIQ technology. The 12V 150AH Lithium Battery has been designed for power hungry devices and applications. The ARCTICXTREME is the UK’S most powerful lithium battery in a standard DIN H8 case. Using Advanced BMS technology the ARCTICXTREME can deliver up to 200 amps of continuous power, enabling you to run up to a 2500W inverter continuously with only a single battery. The next most lithium powerful battery in this size case is 110AH and it can only run a maximum of 1400W before the BMS will shut down the system. Our Premium SmartIQ Series features the latest Bluetooth 5.0 technology, enabling you to monitor your batteries’ health in real-time. You can track the state of charge level, voltage, power, current, temperature, and much more. All our Premium SmartIQ Series batteries come with a full 5-year warranty and have an expected lifespan exceeding 10+ years. The ARCTICXTREME battery comprises traceable Grade A LiFePO4 prismatic cells of the highest quality. We ONLY use traceable Grade A Prismatic cells in all of our range.Designed and engineered in the UK specifically for the UK market we have retained the standard SAE Automotive style DIN battery size with familiar brass terminal posts. In terms of size, this battery is a like-for-like replacement. This battery is a Plug & play replacement, meaning you do not need to replace your existing battery cables or connecting leads. Just remove your old lead acid battery and replace it with the smaller, lighter, and more powerful lithium ULTRAVOLT weighing only 10kgs. The battery has the same base rail, allowing it to be secured into position just like before. It’s ideal for motorhomes, caravans, or camper vans. You can fit two SMARTIQ SERIES batteries perfectly under the seat of a Fiat Ducato’s, Peugeot Boxers, Citroen Relays, Merc Sprinter, VW Crafter, T5, T6 and Transit Custom. All our Premium Smart IQ range batteries come with a full 5-year warranty, with an expected lifespan exceeding 10+ years. All LithiumPro batteries have undergone rigorous testing procedures to ensure they comply fully with all UK & EU Legal Product Certification. The batteries demonstrate compliance with UKCA, CE, ROHS, EMC & RED ELECTRICAL SPECIFICATIONS Nominal Voltage 12.8V Nominal Capacity 150Ah Energy 1920Wh Internal Resistance ≤10 mΩ Efficiency ≥99% Self Discharge <3% per month MECHANICAL SPECIFICATIONS Dimensions (LxWxH) DIN H6 280x178x189mm Weight 10 Kgs Cycles ≥5000 @ 80% DOD Case Material ABS Enclosure Protection IP67 Terminal Type SAE Brass Post Cell Chemistry (EVE-LF105) LiFePO4 BMS SAFETY SPECIFICATIONS Max Continuous Charge Current 200A Recommended (75A) Max Continuous Discharge Current 200A Peak Discharge 260A (10Secs) Discharge Protection cut-off 10V Over Charge Protection cut-off 14.5V Passive Cell Balancing Voltage 3.5V Short Circuit Protection 900<500uS RECOMMENDED CHARGING SPECIFICATIONS Charging Voltage (CCCV) 14.4V Float Voltage 13.8V Charging Current ≤ 75A Parallel & Series Connections Max 4 (48V) Datasheet LithiumPro 150AH ARCTICXTREME Lithium Leisure Battery Datasheet Quick Start Guide LithiumPro 150AH ARCTICXTREME Lithium Leisure Battery Guide

£380.00

Victron Energy VE Transfer Switch 10KVA, 1ph, 200-250Vac – COS230103100

The COS230103100 VE Transfer Switch automatically switches between different power sources: between a generator and shore power, between an inverter and a generator, or between an inverter and shore power. The VE Transfer Switch has two inputs and one output, it automatically transfers the available AC power to the output. GTIN 8719076022084 Warranty 5 Years Country of Manufacture Slovenia

...Read more View Product

£111.00

NDS Energy Sun Control 2 12V 320W MPPT With N-Bus - SCE320

SUNCONTROL2 is the latest and most innovative charge regulator from NDS. The MPPT technology allows to optimize the energy from any solar panel, performing the most modern charging curves, for batteries always charged and efficient over time. Solid and functional thanks to the professional terminal block and equipped with updated communication protocols LIN-BUS / CI-BUS, SUNCONTROL2 is ideal for an installation destined to last over time. Available in two different versions: SC320M with input for two panels up to 320W (without cooling fan) and SC350M which supports up to 350W. The charge regulator is the heart of the photovoltaic system, choosing suncontrol2 means making the most of all the potential of today and the future Main Features: Temperature Sensor Latest Generation Lin-Bus/Ci-Bus Communication Protocols Professional Terminal Block Recharge Starting Battery 5-Stages Charging Curves Desulphation System LED Charging Status Separate Input for Panel Nominal Voltage 12V Nominal Voltage Input 30A Maximum Charging Current 20A Module Max Power 320W MPPT System Yes Protection Fuse 30A Bluetooth No Dimensions L151 x W90 x D48mm Warranty 2 Years

...Read more View Product

£249.45

Victron Energy AGM Dual Purpose Battery 12V 110Ah – BAT412101084

Victron Energy AGM Dual Purpose Battery 12V 110Ah – BAT412101084 The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches. VRLA AGM: design life 7-10 years Features VRLA technology VRLA stands for Valve Regulated Lead Acid, which means that the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure. VRLA batteries are maintenance free for life. Sealed (VRLA) AGM Batteries AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of high currents than gel batteries. Low Self-Discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C. Victron VRLA batteries can therefore be stored for up to a year without recharging if kept under cool conditions. Exceptional Deep Discharge Recovery Victron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge. Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries, Victron batteries are no exception. Battery Discharging Characteristics The rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C. The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge. The effective capacity decreases with increasing discharge current (see table 1). Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter. Brand Victron Energy Manufacturer Part Number BAT412101084 GTIN 8719076036968 Voltage 12V Battery Capacity (C20) 110Ah Cold Cranking 500CCA Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) L330 x W171 x H220mm Weight 32Kg Warranty 2 Years Country of Manufacture Vietnam Battery Technology AGM Battery Application Dual Purpose

...Read more View Product

£123.95

Victron Energy Blue Smart IP65 Charger 12V 10A 1 Output UK – BPC121031024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC121031024R GTIN 8719076039754 Voltage 12V Charge Current 10A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H60 x W105 x D190mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£409.99

Sterling Power Battery to Battery Charger, Non Waterproof 12/24V 70A – BB122470

Sterling’s range of Battery to Battery Chargers (B2Bs) has grown significantly over the past few years. Offering a product range in this market un surpassed by anyone in both power and flexibility. This is in an effort to supplement the ever growing demand from the commercial vehicle, recreational vehicle and marine industries. The B2Bs have become extremely popular as they fast charge batteries as you cruise along without the need for complex wiring, touching your alternator, voiding the alternator’s warranty and tampering with the electronic control units (ECUs). You can provide the onboard batteries with a fast 4 stage charging profile with a very simple and speedy installation. All of the benefits of advanced charging without any of the draw backs. Simply connect the B2B between the battery being charged and the battery you wish to charge. Features Multiple Activation Modes: Automatic for most non vehicle applications Manual for remote activation. Regenerative braking (requiring ignition feed), Automatic regenerative braking, requiring no ignition feed. Output charging at 12V, 24V, 36V and 48V. Input voltages at 12V and 24V, Up to 800W rating. Much larger model up to 3000W coming soon. Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mde allows you to override this. Safety features 100% fire proof plastic box. No screws to corrode. Thermal power reduction. Multi stage fan cooling Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down. Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages. B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V). Customizable Profile: Choose your own charging profile on the front panel. 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid. 4 stage battery charging: Thge B2B charges batteries between 5-20 times faster than a stand alone alternator. Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking). Remote control optional. DC to DC (Battery to Battery) Wiring Diagram, Information and Help Brand Sterling Power Manufacturer Part Number BB122470 DC V (in) 12 DC V (out) 24 Current (A) 70 Dimensions L190 x W160 x D70mm Weight (kg) 1.4 Warranty 2 Years

...Read more View Product

£484.99

EXIDE DUAL AGM - Superior Battery - EP2100 240AH

Exide EP2100 Dual AGM Battery (625) 240Ah 1200cca Exide DUAL AGM battery range is designed for boats and caravans with one battery bank for all consumers. It is also suitable for additional batteries applied directly to electrical winches, thrusters and trolling motors. The batteries are partially discharged during use. DUAL AGM’s reinforced design, combined with a good recharging procedure, is key to providing the best result and service life. The DUAL AGM battery range, with Wh* performance from 450-2100 Wh, is the ideal choice to cover all dual-supply needs for the most popular recreational boats. BENEFITS Ideal for most popular range of motorhomes & caravans High mounting flexibility Maintenance free High vibration & tilt resistant, spill-proof, leak-proof With AGM technology (absorbed glass mat flat plate or orbital) with VRLA venting (valve regulated) , Wh* performance range coverage goes from 450Wh to 2100Wh Weight 72 kg Dimensions 518 × 279 × 240 mm Brand Exide Battery Type AGM/EFB Battery by Application All Batteries, Leisure, Marine Battery Voltage (V) 12V Battery Warranty 2 Years

...Read more View Product

£580.99

Victron Enery BlueSolar MPPT 250/100 Tr VE.Can – SCC125110441

Victron Enery BlueSolar MPPT 250/100 Tr VE.Can – SCC125110441 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 99%. Flexible charge algorithm Fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more BlueSolar Charge Controllers. (VE.Direct Bluetooth Smart dongle needed) VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. Brand Victron Energy Manufacturer Part Number SCC125110441 GTIN 8719076050926 Voltage 12/24/48V Rated Charge Current 100A Nominal PV Power, 12V 1450W Max. PV Short Circuit Current 70A Max. PV Open Circuit Voltage 150V resp. 250V absolute maximum coldest conditions, 145V resp. 245V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled No Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years Country of Manufacture Malaysia

...Read more View Product

£139.45

Victron Energy Blue Smart IP67 Charger 12V 17A 1 Output UK – BPC121747026

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC121713006 GTIN 8719076038252 Voltage 12V Charge Current 17A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 95% Bluetooth Enabled Yes Plug Type UK Dimensions H99 x W219 x D65mm Weight 2.4Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£216.95

Victron Energy Blue Smart IP22 Charger 24V 16A 3 Outputs BPC241648022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC241648022 GTIN 8719076052517 Voltage 24V Charge Current 16A Input Voltage 230V Number of Outputs 3 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£209.95

Victron Energy Blue Smart IP22 Charger 24V 16A 3 Outputs UK – BPC241648022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC240842002 GTIN 8719076037491 Voltage 24V Charge Current 8A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£749.00

TN Power Lithium 12.8V 100Ah Leisure Battery LiFePO4 with Bluetooth and Heater

100Ah Heated Lithium Leisure Battery Features Using the technology of lithium iron phosphate cell, superior safety Thousands of cycles, 100% DOD, under normal conditions Built-in automatic protection for over-charge, discharge and tempertature Built in heater maintaining battery at over 5 °C when charging Maintenance Free Internal cell balancing About 40% ~50% of the weight of a comparable lead acid battery. Can be charged using most standard lead-acid charges (set) Wider temperature range:-20OC ~60OC Support for Series application expansion (up to 51.2V) and two in parallel Application Recreational Vehicles Motorhomes Marine Renewable Energy Medical / Mobility Electric Vehicles Golf Cart Brand TN Power Manufacturer Part Number TN12.8-100(LT) Warranty 5 Years Country of Manufacture China Terminal Type M8 Weight 13.1Kg Dimensions L328 x W172 x H220mm Cycle Life >2000 Cycles @ 0.2C Charging/Discharging at 100%DOD,Until 70% Capacity Nominal Voltage 12.8V Energy 1075.2Wh 1280Wh Nominal Capacity 100Ah@0.2C Discharging Current 20A Max Continuous Current 100A Casing ABS Discharging Cut-off Voltage 10.0V Max Pulse Current 200A (<3S°C) Max Charging Current 50A Charging Current 20A Charging Voltage 14.6±0.2V Bluetooth Built-In Water Dust Resistance IP55

...Read more View Product

£208.99

Rolls AGM Battery R12-110AGM

Specifications Weight 30 kg 66 lbs Length 32.8 cm 12.91" Width 17.2 cm 6.77" Height Inc. Term. 22 cm 8.66" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Rope / Plastic Handle Series AGM-R Warranty See Warranty Terms Volts 12 BCI Grp 31 Cells 6 Terminal Type DT Included Hardware Stainless Steel Nuts & Bolts Size & Thread DT Charge Charge Voltage Range 14.7V @ 25°C (77°F) Float Voltage Range 13.8V @ 25°C (77°F) Recommended Charge Current 20 A Maximum Charge Current 35 A Self-Discharge Rate Less than 2% per month at 25°C (77°F) Internal Resistance 9 mΩ Capacity Cold Crank Amps (CCA) 0°F / -18°C 760 Marine Crank Amps (MCA) 32°F / 0°C 910 Reserve Capacity (RC @ 25A) 205 Minutes Reserve Capacity (RC @ 75A) 65 Minutes Capacity Affect by Temperature 40°C(104°F) 25°C(77°F) 0°C(32°F) -15°C(5°F) 102% 100% 85% 65% Hour Rate Capacity / AMP Hour Current / AMPs @ 100 Hour Rate 120 AH 1.2 A @ 20 Hour Rate 110 AH 5.5 A @ 10 Hour Rate 90 AH 9 A @ 5 Hour Rate 82 AH 16.4 A Cut Off Voltage Constant Current Discharge VPC 1 hr 2 hr 3 hr 5 hr 8 hr 10 hr 60.6 32.5 28 16.4 10.6 9

£218.99

Rolls Battery AGM R12-100AGM

Specifications Weight 27 kg 59.5 lbs Length 30.6 cm 12.05" Width 16.9 cm 6.65" Height Inc. Term. 23.7 cm 9.33" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Rope / Plastic Handle Series AGM-R Warranty See Warranty Terms Volts 12 BCI Grp 27 Cells 6 Terminal Type DT Included Hardware Stainless Steel Nuts & Bolts Size & Thread DT Charge Charge Voltage Range 14.7V @ 25°C (77°F) Float Voltage Range 13.8V @ 25°C (77°F) Recommended Charge Current 20 A Maximum Charge Current 30 A Self-Discharge Rate Less than 2% per month at 25°C (77°F) Capacity Cold Crank Amps (CCA) 0°F / -18°C 600 Marine Crank Amps (MCA) 32°F / 0°C 850 Reserve Capacity (RC @ 25A) 170 Minutes Reserve Capacity (RC @ 75A) 40 Minutes Capacity Affect by Temperature 40°C(104°F) 25°C(77°F) 0°C(32°F) -15°C(5°F) 102% 100% 85% 65% Hour Rate Capacity / AMP Hour Current / AMPs @ 100 Hour Rate 110 AH 1.1 A @ 20 Hour Rate 100 AH 5 A @ 10 Hour Rate 90 AH 9 A @ 5 Hour Rate 82 AH 16.40 A Cut Off Voltage Constant Current Discharge VPC 1 hr 2 hr 3 hr 5 hr 8 hr 10 hr 60 30.1 25.1 15.8 10.4 8.6

...Read more View Product

£178.99

Rolls AGM Battery R12-80AGM

Specifications Weight 23 kg 50.5 lbs Length 26 cm 10.24" Width 16.9 cm 6.65" Height Inc. Term. 23.7 cm 9.33" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Rope / Plastic Handle Series AGM-R Warranty See Warranty Terms Volts 12 BCI Grp24 Cells 6 Terminal Type DT Included Hardware Stainless Steel Nuts & Bolts Size & Thread DT Charge Charge Voltage Range 14.7V @ 25°C (77°F) Float Voltage Range 13.8V @ 25°C (77°F) Recommended Charge Current 15 A Maximum Charge Current 25 A Self-Discharge Rate Less than 2% per month at 25°C (77°F) Capacity Cold Crank Amps (CCA) 0°F / -18°C 500 Marine Crank Amps (MCA) 32°F / 0°C 750 Reserve Capacity (RC @ 25A) 145 Minutes Reserve Capacity (RC @ 75A) 30 Minutes Capacity Affect by Temperature 40°C(104°F) 25°C(77°F) 0°C(32°F) -15°C(5°F) 102% 100% 85% 65% Hour Rate Capacity / AMP Hour Current / AMPs @ 100 Hour Rate 90 AH 0.9 A @ 20 Hour Rate 81 AH 4.05 A @ 10 Hour Rate 73 AH 7.3 A @ 5 Hour Rate 67 AH 13.40 A Cut Off Voltage Constant Current Discharge VPC 1 hr 2 hr 3 hr 4 hr 5 hr 8 hr 10 hr 40.6 22.8 17.1 13.4 11.2 8.2 6.8

...Read more View Product

£138.99

High Efficiency 40A Mppt Solar Charge Controller For Solar Panels Up To 520W (12V) / 1040W (24V) Up To 100V

MPPT Technology:This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined input solar power allowed for this controller is 520W for a 12V battery system or 1040W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full system protection:This charge controller features a comprehensive set of electronic protection functions to ensure the maximum possible efficiency of your solar system. These include: reverse current prevention at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, solar panel over voltage, over load, short circuit and reverse polarity protection. The controller also has self-diagnostic capability and highlights any system errors using advanced fault-targeting technology. Lithium Battery charging:This solar charge controller is compatible with lithium batteries when a lithium battery charging program is selected using PC software (see below for more details), and can also set the charging parameters for lithium batteries.Advanced system monitoring:The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel)Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energyEasy to use buttons allow the user to manually select the battery type (sealed, flooded or gel) and program load settings (e.g. set timers for lighting, fans, pumps etc).Current limiting function (40A) allows the possibility of adding more solar panels to your solar system in the future Multiple connectivity optionsThis model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only). If using the RJ45 to USB cable, the user also has the option to create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable).Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. (Inbuilt temperature sensor is not enabled for lithium batteries). Controller specifications: The most advanced MPPT technology to ensure high efficiency (>95%) of your solar system Fully automated operation and auto 12/24V selection for lead acid batteries 3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 520W (12V) / 1040W (24V) Temperature sensor for automatic compensation (-3mV/°C/2V) (auto temperature compensation not enabled for lithium batteries) Comprehensive electronic protection features Communication port: RS485/RJ45 interface Grounding: negative common ground Current limiting function (40A) Self-consumption: <12mA Working temperature: -25°C to +50°C Size: 25.2 x 18 x 6.3 cm Mounting dimensions: 21 x 17.1 cm Weight: 1.65kg Multiple mounting holes (5mm diameter) for ease of installation

...Read more View Product

£469.99

Victron Smartsolar Mppt 150/100 100A Solar Charge Controller

Victron Smartsolar Mppt 150/100 100A Solar Charge Controller This Victron 150V 100A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. SmartSolar MPPT controllers uniquely feature built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, along with a programmable relay with various signalling options.Ultrafast MPPT Technology:This 100A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, reverse polarity, overvoltage, overcurrent and reverse current, as well as battery overvoltage, reverse polarity and overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional LCD display:Alternatively, this SmartSolar controller features a connection area for an optional Plug-in LCD display (sold separately). Simply remove the rubber seal on the face of the controller and plug in the removeable LCD display to access a range of monitoring and programming functions. This display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data and any system faults. The user can also set their own charging parameters for a user-defined battery type, personalise settings for the load, charging stages and more.Programmable relay:This solar charge controller has programmable relay contacts, which can be programmed (e.g. with a smartphone, via the app) to start a generator or to send a low battery signal which will activate an audible alarm.Other features:The Victron SmartSolar MPPT 150/100 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36* / 48V selection- 2 pairs of terminals (solar panel, battery) for wires up to 35mm2- Inbuilt bluetooth- Programmable relay: AC rating: 240VAC /4A , DC rating: 4A up to 35VDC, 1A up to 60VDC- Max solar panel voltage: 150V- Max solar panel power: 1450W (12V) / 2900W (24V) / 4350W (36V) / 5800W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -48mV / -64mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: <35mA (12V) / <20mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 216 x 295 x 103 mm- Mounting dimensions: 273 x 144 mm- Weight: 4.5kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£299.99

Victron Energy SmartSolar MPPT 150/60-Tr – SCC115060211

Victron Energy SmartSolar MPPT 150/60-Tr – SCC115060211 This Victron 150V 60A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. SmartSolar MPPT controllers uniquely feature built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, along with a programmable relay with various signalling options.Ultrafast MPPT Technology:This 60A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, reverse polarity, overvoltage, overcurrent and reverse current, as well as battery overvoltage, reverse polarity and overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional LCD display:Alternatively, this SmartSolar controller features a connection area for an optional Plug-in LCD display (sold separately). Simply remove the rubber seal on the face of the controller and plug in the removeable LCD display to access a range of monitoring and programming functions. This display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data and any system faults. The user can also set their own charging parameters for a user-defined battery type, personalise settings for the load, charging stages and more.Optional control panel:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage. Programmable relay:This solar charge controller has programmable relay contacts, which can be programmed (e.g. with a smartphone, via the app) to start a generator or to send a low battery signal which will activate an audible alarm.Other features:The Victron SmartSolar MPPT 150-60 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36* / 48V selection- 2 pairs of terminals (solar panel, battery) for wires up to 35mm2- Inbuilt bluetooth- Programmable relay: AC rating: 240VAC /4A , DC rating: 4A up to 35VDC, 1A up to 60VDC- Max solar panel voltage: 150V- Max solar panel power: 860W (12V) / 1720W (24V) / 2580W (36V) / 3440W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -48mV / -64mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: <35mA (12V) / <20mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 185 x 250 x 95 mm- Weight: 3kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£2.45

Berker Single Backing Box W4 21261

Berker Single Backing Box W4 21261 Single backing box with external double cable clamp.49mm diam.With 2 line entries on rear and 1 knockout opening.Insertion depth 45.5mm.Flame resistant according to VDE 0606-1

...Read more View Product

£174.99

Sterling Pro Split R 12V 120A 2 Out Split Isolator

The ProSplit R is an advanced split charge management device, developed specifically to deal with the complex nature of modern multi battery systems in boats and vehicles. For single or dual alternator inputs to two, three or four battery bank installations. Complex software with some 1000 lines of code analyses every perceivable condition to ensure charging priorities are managed as you want with specific focus on preserving charge in the engine starter battery. Each input & output terminal is independently monitored to establish status before deciding where charge will be delivered and to prevent discharge from one battery to another. Truly zero voltage drop is one key feature of the Pro Split R. Many alternative products claim to have no voltage loss but, under test, are proven not to be so - especially with heavy loads - when it really matters. It may not seem significant but 1V drop equates to as much as 30% lost charging power in a 12V system. ? Unlike conventional Voltage Sensitive Relays (VSRs), the ProSplit R has the ability to identify and reverse current or over-voltage conditions and disconnect individual batteries to avoid damage or discharge. The ignition sense connection also ensures that the device knows the engine is running and protects the start battery when the engine is off ? Specification: Alt Volts: 12 Max Alt Amps: 12 Output Battery Bank: 2 out Unit Size (mm): 150 x 80 x 120 Unit Weight: 0.6 For cable information for all Sterling Products click here

...Read more View Product

£424.99

Stering 12v 1800w Inverter (Inc. Remote)

All Sterling inverters are continuously rated, with all the usual overload, over voltage and low voltage cut outs, all the inverters come with cable and 24 kt gold connectors, in order to prevent battery terminal corrosion. Available in 230V for UK and Europe and also 110V for building sites / off vehicle use or for equipment supplied on boats made in the USA (not suitable for washing machine / some bread makers). Thermostatically controlled fans Overload, overheat, short circuit protected Standby-current: Efficiency: 85%-95% Incl. battery cable (1m length) Weight: 4kg Socket Type: British / Euro Voltage DC: 12 Power (Continuous) Watts: 1800 Size L x W x D mm: 300 x 250 x 100 Instruction Manual PDF Product Information PDF

...Read more View Product

£102.00

Blue Sea 2104 PowerBar 4x 3/8-16 Stud Terminal BS2104

PowerBar 4x 3/8-16 Stud Terminal Blue Sea 2104 BS2104 Made from ABS (strong nylon) and mounting plate wires / cables made of nickel-plated brass. terminals 4x 3/8 ?, dimensions 117 x 51 mm Continuous Amperage: 600 Amp. Volt max: 48 V. DC 300 V. AC

...Read more View Product

£102.32

Blue Sea 7611 BS7611 Solenoid BatteryLink 120A 12/24V ACR

BatteryLink™ Automatic Charging Relay - 12V/24V DC 120A BS7611 Blue Sea 7611 Automatically shares single source of charge with Auxiliary Battery Features 120 Amp continuous rating 12/24V DC auto ranging voltage input Senses charging on two battery banks Side and bottom knockouts for cable connections Clip-on cover insulates terminal connections 7?8" (22 mm) stud length to accept multiple cable terminals Integrated LED indicates ACR status 1?4" × .032" male quick connect terminals for ground and optional features Largest battery bank cannot exceed Group 27 Optional Features Optional Auxiliary Battery Priority connection shares the alternator charge with the Auxiliary battery longer when the engine is running to allow the use of auxiliary loads for an extended period of time Remote LED remotely indicates ACR states - requires optional LED

£31.49

Blue Sea 6005 BS6005 Switch Battery m-Series ON/OFF With Locking Key

m-Series Mini On-Off Battery Switch with Key - Red BS6005 Blue Sea 6005 Switches a single battery to a single load group Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts View all Blue Sea M-Series Battery Switches

£26.16

Blue Sea 5133 BS5133 Fuse ANL 300A

ANL Fuse - 300 Amp BS5133 Blue Sea 5133 Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only) Silver-plated connector blades for corrosion resistance Visible indication of blown condition 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks For use with Blue Sea Systems' ANL Fuse Blocks

...Read more View Product

£58.14

Blue Sea 2126 BS2126 MaxiBus 6x5/16 Stud Common

Blue Sea Systems MaxiBus 250A BusBar - Six 5/16"-18 Studs BS2126 Blue Sea 2126 Busbars are used to consolidate multiple wires or feed multiple circuits Insert molded stainless steel studs eliminate need for securing nut and allow high torquing for excellent electrical contact Raised bus provides easy access to multiple wires on a single stud UL 94-V0 rated base material resists high heat Recessed mounting holes eliminate accidental shorts to aluminum and steel mounting surfaces

...Read more View Product

£15.99

Blue Sea 2002 BS2002 PowerPost 5/16in

Blue Sea PowerPost - 5/16"-18 Stud 2002 Insulated single stainless steel stud terminates multiple large conductors Connects high amperage cables securely Stud dimensions: 5/16" x 7/8" Base Material is PBT UL94 V0

£166.00

Blue Sea 7649 BS7649 Solenoid Mini Add A Battery

Blue Sea 7649 BS7649 Solenoid Mini Add A Battery The ADD-A-BATTERY is as simple to operate as an ON-OFF switch, yet effectively manages the switching and charging of two batteries from a single charge source The Add-A-Battery includes a Dual Circuit Plus™ Battery Switch and an Automatic Charging Relay. These components simplify switching and automate charging so that all you have to do is turn the battery switch ON when you arrive and OFF when you leave. Dual Circuit Plus™ Battery Switch Simplifies switching Isolates engine and house circuits Combines batteries for emergency starting Tin-plated copper studs for maximum conductivity and corrosion resistance ACR Automatic Charging Relay Automatically combines batteries during charging Isolates batteries during engine cranking and when not charging Shares the charge between two batteries more efficiently than a battery isolator Allows efficient dual battery charging without needing regulator adjustment or rewiring

...Read more View Product

Blue Sea 5116 Fuse A3T/Class T 200A

Extremely fast short-circuit response. 20,000 Ampere Interrupt Capacity (AIC)

...Read more View Product

Blue Sea 5114 Fuse A3T/Class T 150A

Extremely fast short-circuit response. 20,000 Ampere Interrupt Capacity (AIC)

...Read more View Product

£47.99

Blue Sea 5046 BS5046 Fuse Block ST Blade Compact 8 Circuits with Cover

Blue Sea 5046 BS5046 Fuse Block ST Blade Compact 8 Circuits with Cover Provides surface mount circuit protection for ATO?/ATC? Fuses in a compact footprint. Ignition protected when cover is secure ?meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment Single side design allows wire entry from one side to minimize footprint Insulating cover meets ABYC/USCG insulation requirements Tin-plated copper buses and fuse clips Accepts ring or snap fork type terminals Includes 8 write-on circuit labels Fuses sold separately

...Read more View Product

£34.93

Blue Sea 5033 Fuse Block ST Blade 6 Circuits

Consolidates branch circuits and in-line fuses Positive distribution bus with #10-32 stud. Can be used for 24-hour circuits. Models available with or without a cover. Tin-plated copper buses and fuse clips. Accepts ring or snap fork type terminals. Accepts ATO® and ATC® fast acting blade fuses. Fuses sold separately

£41.40

Sterling 6 amp 6V and 12V Battery Charger

Portable micro processor controlled chargers 230V AC 50 Hz only Fully automatic microprocessor controlled Can be set at 2, 4 , 6 amps for 6V and 12V Batteries 2 Amp slow charge - for charging and maintaining small batteries 4 Amp medium charge - self-adjusting charge rate idea for everyday charging needs and keeping your battery in peak condition 6 Amp fast charge - charge monitor battery condition and adjusts charge rate downward to prevent battery damage Overheat protection, short circuit protection, reverse polarity protection, input low voltage and over voltage protection Suitable for use with lead-acid and AGM batteries Automatically switches to float charger and maintenance when battery is fully charged Battery rejuvenation pulse function inc. De-Sulphation protection LED Display Voltage DC Amps AC Plug Size L x W x D mm Weight Kg 6 & 12 6 British 180 x 100 x 55 0.72

...Read more View Product

£445.99

Victron Energy LiFePO4 Battery 12.8V 50Ah Smart – BAT512050610

Victron Energy LiFePO4 Battery 12.8V 50Ah Smart – BAT512050610 The Victron Energy 50Ah Smart Battery With integrated cell balancing Can be parallel and series connected Bluetooth app available to monitor cell voltage and temperature Requires one of these BMS-es: VE.Bus BMS – recommended for systems with our inverter/chargers. smallBMS – recommended for use in small systems. Battery Management System BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS CL 12/100 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Lynx Smart BMS – recommended for use in large systems. Features of the 50Ah Smart Battery RuggedA lead-acid battery will fail prematurely due to sulfation:• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid.Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for demanding applications. EfficientIn several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead acid battery is 80%.The round-trip energy efficiency of a LFP battery is 92%.The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state).In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions. Size and weightSaves up to 70% in spaceSaves up to 70% in weight Expensive?LFP batteries are expensive when compared to lead acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency. BluetoothWith Bluetooth cell voltages, temperature and alarm status can be monitored.Very useful to localize a (potential) problem, such as cell imbalance. The 50Ah Smart battery is equipped with Bluetooth and uses this to communicate with the VictronConnect app. The VictronConnect app can be used for:• Monitoring the battery status• Monitoring the battery voltage• Monitoring the battery temperature• To find out when the battery was last fully charged• Monitoring the cell balancing status• Monitoring the individual cell voltages• To view or change the battery settings• To update the battery firmware Brand Victron Energy Manufacturer Part Number BAT512050610 gtin 8719076051633 Voltage 12V Battery Capacity (C20) 50Ah Terminal Type M8 Terminal Layout Right Hand Positive Dimensions (Including Terminals) H199 x W188 x D147mm Weight 7Kg Warranty 3 Years Battery Technology Lithium Battery Application Deep Cycle Country of Manufacture China

£537.50

Combined Solar & Split Charge kit (Victron 185w Panel & Sterling BBS1230)

Combined Solar & Split Charge kit (Victron 185w Panel & Sterling BBS1230) The new combined battery-to-battery charger and solar regulator from Sterling Power maximizes the operational usage of the battery-to-battery charger. It does this by adding a solar operation to the product both when the vehicle is in motion and moreover when the vehicle is stationary. This makes it, in effect, also a free 350W solar regulator when the vehicle is stationary. This product has all the benefits of the standard 30A Battery to Battery charger when the engine is on. This kit comprises of the following: Sterling BBS1230 combined B2B Split charger / Solar MMPTVictron 185w Monocrystalline Solar PanelSolar Panel Z Bracket Mount (Call if you require other mount types)6mm (5m) Solar Extension Cables with MC4 connectorsDouble Entry Roof GlandResettable Circuit Breaker16mm Battery Cable ( 1 to 10m ) Red & Black2 x Victron Mega Fuse Holders2 x 60amp Mega FusesCable Terminal Lugs Features 1) Multiple Activation Modes: Automatic for most non-vehicle applications, Manual for remote activation. Regenerative braking (requiring ignition feed), Automatic regenerative braking, requiring no ignition feed. 2) Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mode allows you to override this. 3) Safety features: 100% fire proof plastic box. No screws to corrode. Thermal power reduction. Multi-stage fan cooling 4) Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down. 5) Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages. 6) B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V). 7) Customizable Profile: Choose your own charging profile on the front panel. 8) 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid. 9) 4-stage battery charging: The B2B charges batteries between 5-20 times faster than a stand-alone alternator. 10) Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking). Remote control is optional. Brand Sterling Power Manufacturer Part Number BBS1230 DC V (in) 12V DC V (out) 12V Current (A) 30A input, 350W solar Dimensions L190 x W160 x D50mm Weight (kg) 1.5Kg Warranty 2 Years

...Read more View Product

£235.99

Sterling BBS1230 'Pro Batt Ultra' Battery-To-Battery Charger +MPPT Solar Controller

Sterling BBS1230 'Pro Batt Ultra' Battery-To-Battery Charger 12V/12V 30A with combined 350w MPPT Solar Controller The new combined battery-to-battery charger and solar regulator maximizes the operational usage of the battery-to-battery charger. It does this by adding a solar operation to the product both when the vehicle is in motion and moreover when the vehicle is stationary. This makes it, in effect, also a free 350W solar regulator when the vehicle is stationary. This product has all the benefits of the standard 30A Battery to Battery charger when the engine is on. Features 1) Multiple Activation Modes: Automatic for most non-vehicle applications, Manual for remote activation. Regenerative braking (requiring ignition feed), Automatic regenerative braking, requiring no ignition feed. 2) Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mode allows you to override this. 3) Safety features: 100% fire proof plastic box. No screws to corrode. Thermal power reduction. Multi-stage fan cooling 4) Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down. 5) Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages. 6) B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V). 7) Customizable Profile: Choose your own charging profile on the front panel. 8) 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid. 9) 4-stage battery charging: The B2B charges batteries between 5-20 times faster than a stand-alone alternator. 10) Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking). Remote control is optional. Brand Sterling Power Manufacturer Part Number BBS1230 DC V (in) 12V DC V (out) 12V Current (A) 30A input, 350W solar Dimensions L190 x W160 x D50mm Weight (kg) 1.5Kg Warranty 2 Years

...Read more View Product

£499.00

LithiumPro Energy ULTRAVOLT 105AH Lithium Leisure battery

LithiumPro Energy ULTRAVOLT 105AH Lithium Leisure battery The premium 12v LITHIUM BATTERY range from Lithium Pro Energy, the ULTRAVOLT with SmartIQ technology. The 12V 105AH Lithium Battery has been designed for power-hungry devices and applications. Using Advanced BMS technology the ULTRAVOLT delivers up to 150 amps of continuous power, allowing you to run up to a 2000W inverter continuously with only a single battery. All other 100AH batteries on the market can only run at a maximum 0f 1200W ( not necessarily continuously) before the BMS shuts down the battery. Our Premium SmartIQ Series features the latest Bluetooth 5.0 technology, enabling you to monitor your batteries’ health in real time. You can track the state of charge level, voltage, power, current, temperature, and much more. All our Premium SmartIQ Series batteries come with a full 5-year warranty and have an expected lifespan exceeding 10+ years. The ULTRAVOLT battery comprises 105ah EVE LiFePO4 prismatic cells of the highest quality. We ONLY use traceable Grade A cells in all of our range.Designed and engineered in the UK specifically for the UK market we have retained the standard SAE Automotive style DIN battery size with familiar brass terminal posts. In terms of size this battery is a like-for-like replacement. its a Plug-and-play replacement, Meaning you do not need to replace your existing battery cables. Just remove your old lead acid battery and replace it with the smaller, lighter, and more powerful lithium ULTRAVOLT weighing only 10kgs. The battery has the same base rail, allowing it to be secured into position just like before. It’s ideal for motorhomes, caravans, or camper vans. You can fit two SMARTIQ SERIES batteries perfectly under the seat in Fiat Ducato’s, Peugeot Boxers, Citroen Relays, Merc Sprinter, VW Crafter, T5, T6, and Transit Custom. All our Premium Smart IQ range batteries come with a full 5-year warranty, with an expected lifespan exceeding 10+ years. All LithiumPro batteries have undergone rigorous testing procedures to ensure they comply fully with all UK & EU Legal Product Certification. The batteries demonstrate compliance with UN38.3, UKCA, CE, ROHS, EMC & RED Monitor Real-Time Battery Data from your Phone Using the latest Bluetooth 5 technology on your IOS or Android device you can pair to a SMARTIQ SERIES battery for real-time data monitoring. Check Battery Status, Faults & Alarms The BMS Battery Management System controls all battery parameters, logging and logs the faults when it has had to intervene for safety and help you use your battery more efficiently. Multiple Battery Connections Whether your system is connected in SERIES or PARALLEL with our APP you can now monitor all your battery data on a single screen RealState-of-Charge No more guessing - Get live data showing the % State of Charge SOC of your battery and how long till your battery will be to fully charged or completely discharged ELECTRICAL SPECIFICATIONS Nominal Voltage 12.8V Nominal Capacity 105Ah Energy 1344Wh Internal Resistance ≤10 mΩ Efficiency ≥99% Self Discharge <3% per month MECHANICAL SPECIFICATIONS Dimensions (LxWxH) DIN H6 280x178x189mm Weight 10 Kgs Cycles ≥5000 @ 80% DOD Case Material ABS Enclosure Protection IP67 Terminal Type SAE Brass Post Cell Chemistry (EVE-LF105) LiFePO4 BMS PROTECTION SPECIFICATIONS Max Continuous Charge Current 150A Recommended (75A) Max Continuous Discharge Current 150A Peak Discharge 200A (10 Secs) Discharge Protection cut-off 10V Over Charge Protection cut-off 14.5V Passive Cell Balancing Voltage 3.5V Short Circuit Protection 900<500uS RECOMMENDED CHARGING SPECIFICATIONS Charging Voltage (CCCV) 14.4V Float Voltage 13.8V Charging Current ≤ 75A Parallel & Series Connections Max 4 (48V) Datasheet LithiumPro Energy ULTRAVOLT 105AH Lithium Leisure battery Datasheet Quick Start Guide LithiumPro Energy ULTRAVOLT 105AH Lithium Leisure battery Guide

£499.00

LithiumPro Energy COMPACT Lite 100AH Lithium Leisure battery

LithiumPro Energy COMPACT Lite 100AH Lithium Leisure battery LithiumPro Energy presents the 100AH Lithium Leisure battery, the COMPACT Lite, our 'Entry-Level' Lithium Leisure Battery designed with affordability and reliability in mind. We have designed this lithium battery using 'traceable' Advanced A-grade prismatic cell technology to deliver consistent and stable power, meeting even the most demanding off-grid applications at a competitive price. This 100AH battery is lightest in the UK, weighing a mere 9kgs, and boasts a compact size while delivering a powerful 100A continuous discharge and charging capability. You can safely and continuously run a 1200W inverter with the COMPACT Lite thanks to its advanced 100A BMS. The Compact Lite is an ideal battery to fit under your seat base of your motorhome of campervan. It fits under the seat base of all Fiat-Ducatos, Citroen-Relays, Peugeot-Boxers, Merc Sprinter, VW Crafters, VW T4/T5/T6 and Ford Customs. This 100ah lithium leisure battery is the ideal 'Entry-Level' priced product. But don't think quality or safety has been overlooked. Safety is of paramount importance to LithiumPro Energy, this is why our products are put through a rigorous testing program to guarantee compliance with UKCA, CE, ROHS & UN38.3 standards and it are backed by our comprehensive 3-year warranty, and comes with an expected 10-year lifespan. All LithiumPro batteries have undergone rigorous testing procedures to ensure they comply fully with all UK & EU Legal Product Certification. The batteries demonstrate compliance with UKCA, CE, ROHS, EMC & RED ELECTRICAL SPECIFICATIONS Nominal Voltage 12.8V Nominal Capacity 100Ah Energy 1280Wh Internal Resistance ≤10 mΩ Efficiency ≥99% Self Discharge <3% per month MECHANICAL SPECIFICATIONS Dimensions (LxWxH) 260x168x209mm Weight 9.9 kgs Cycles ≥3000 @ 80% DOD Case Material ABS Enclosure Protection IP65 Terminal Type M8 Internal Thread Cell Chemistry LiFePO4 SAFETY & PROTECTION SPECIFICATIONS Max Continuous Charge Current 100A Recommended (50A) Max Continuous Discharge Current 100A Peak Discharge 160A (10 Secs) Discharge Protection cut-off 10V Over Charge Protection cut-off 14.5V Passive Cell Balancing Voltage 3.5V Short Circuit Protection 600<500uS 100ah Lithium Pro Datasheet LithiumPro Energy COMPACT Lite 100AH Lithium Leisure battery Datasheet Quick Start Guide LithiumPro Energy COMPACT Lite 100AH Lithium Leisure battery Quick Start Guide

...Read more View Product

£1,195.00

Pylontech US2000C 48V 2.4kWh lithium storage solar battery

Solar lithium storage of the latest generation, which offers maximum safety and a long service life even with regular deep discharge. The solar storage has an integrated battery management system (BMS) in each individual module. The Pylontech can be mounted in 19 inch cabinets or with the accessory holders on top of each other or standing side by side. The system is modular and can therefore be individually adapted to the needs of your household or commercial operation. The memory can be connected to a total of 16 pieces. Technical specifications: Technology: Lithium iron phosphate LiFePo4 Service Life: 6000 cycles at 90% depth of discharge Rated voltage: 48V Rated Capacity: 2400Wh Charge Voltage range: 52.5 - 53.2V Recommended charge current / discharge current: 25A Maximum charge current / discharge current: 50A (peak 100A for 15 seconds) Lenght: 442mm Width: 410mm Height: 89mm Capacity: 50Ah Warranty: 7 years Scope of delivery: 1x PylonTech LiFePo4 module 48V 2.4 kWh US2000C with BMS 1 x battery module connection cable (1x+ and 1x-) PylonTech is a leading manufacturer of lithium battery energy storage systems and has been for over 10 years. PylonTech specialise in BMS, EMS and system integration, with a wide range of products suitable for domestic micro-grids, commercial energy storage, photovoltaic power plants and base stations.

...Read more View Product

£24.53

Victron Energy Orion IP67 24/12V 5A (60W) – ORI241205260

Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin. Extra-long input and output cables Thanks to the cables of 1.8 meters in length, intermediate cable interconnections to increase length even more will in most cases not be needed. This is an important reliability increasing feature in an area were IP67 protection grade is needed. Wide input voltage range With 15 to 40 Volts input range, a stable output is ensured during surges or sags due to other equipment connected to same battery. Protected against overheating It can be used in a hot environment such as a machine room. Brand Victron Energy Manufacturer Part Number ORI241205260 GTIN 8719076048428 Voltage 24/12V Cont. Output Current 5A Protection Category IP67 Efficiency 93% Bluetooth Enabled No Dimensions H25 x W43 x D20mm Weight 0.05Kg Warranty 5 Years Country of Manufacture China

...Read more View Product

£190.49

Victron Energy Blue Smart IP65 Charger 12V 25A 1 Output UK – BPC122531024

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC122531024 GTIN 8719076051565 Voltage 12V Charge Current 25A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H75 x W140 x D240mm Weight 1.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£156.99

Victron Energy Blue Smart IP65 Charger 24V 8A 1 Output UK – BPC240831024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC240831024R GTIN 8719076040699 Voltage 24V Charge Current 8A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 95% Bluetooth Enabled Yes Plug Type UK Dimensions H60 x W105 x D190mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£409.99

Sterling Power Battery to Battery Charger, Non Waterproof 24/24V 35A – BB242435

Sterling’s range of Battery to Battery Chargers (B2Bs) has grown significantly over the past few years. Offering a product range in this market un surpassed by anyone in both power and flexibility. This is in an effort to supplement the ever growing demand from the commercial vehicle, recreational vehicle and marine industries. The B2Bs have become extremely popular as they fast charge batteries as you cruise along without the need for complex wiring, touching your alternator, voiding the alternator’s warranty and tampering with the electronic control units (ECUs). You can provide the onboard batteries with a fast 4 stage charging profile with a very simple and speedy installation. All of the benefits of advanced charging without any of the draw backs. Simply connect the B2B between the battery being charged and the battery you wish to charge. Features Multiple Activation Modes: Automatic for most non vehicle applications Manual for remote activation. Regenerative braking (requiring ignition feed), Automatic regenerative braking, requiring no ignition feed. Output charging at 12V, 24V, 36V and 48V. Input voltages at 12V and 24V, Up to 800W rating. Much larger model up to 3000W coming soon. Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mode allows you to override this. Safety features 100% fire proof plastic box. No screws to corrode. Thermal power reduction. Multi stage fan cooling Night Time Setting: Allows the unit to run at half the power so the fan noise is kept down. Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages. B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V). Customizable Profile: Choose your own charging profile on the front panel. 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid. 4 stage battery charging: The B2B charges batteries between 5-20 times faster than a stand alone alternator. Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking). Remote control optional. DC to DC (Battery to Battery) Wiring Diagram, Information and Help

...Read more View Product

£663.99

Sterling Power 48V 15A Digital Battery Charger - PCU4815

Sterling Power PCU4815 With years of experience in this market everything Sterling Power could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take their word for it. This was confirmed on its first competative test with Sailing Today Magazine where it won premium product against the toughest competitiors (Mastervolt and victron plus others). It was described as "this has to be the most flexible marine charger on the market today". Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently relseased onto the market. Benefits - Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity. - Battery Temperature compensation sensor included. - Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses. - Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish. - 11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel. - Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability Technical Specification DC V 48 V Rating (A) 15 A Length 315 mm Width 215 mm Height 90 mm Weight 3 kg Warranty 5 Years

...Read more View Product

£124.99

Exide EP600 Dual AGM Battery (067) 70Ah 760cca

Exide EP600 Dual AGM Battery (067) 70Ah 760cca Exide DUAL AGM battery range is designed for boats and caravans with one battery bank for all consumers. It is also suitable for additional batteries applied directly to electrical winches, thrusters and trolling motors. The batteries are partially discharged during use. DUAL AGM’s reinforced design, combined with a good recharging procedure, is key to providing the best result and service life. The DUAL AGM battery range, with Wh* performance from 450-2100 Wh, is the ideal choice to cover all dual-supply needs for the most popular recreational boats. BENEFITS Ideal for most popular range of motorhomes & caravans High mounting flexibility Maintenance free High vibration & tilt resistant, spill-proof, leak-proof With AGM technology (absorbed glass mat flat plate or orbital) with VRLA venting (valve regulated) , Wh* performance range coverage goes from 450Wh to 2100Wh Manufacturer: ExidePart Number: EP600Weight: 21kgLength: 278mmWidth: 175mmHeight: 190mmVoltage: 12VCapacity (AH): 70Cold Cranking (EN): 760Terminal Layout: + rightBattery Type: AGMWarranty: 12 MonthsApplication: Engine Start

£60.00

Victron Energy BlueSolar MPPT 100/15 – SCC010015200R

Victron Energy BlueSolar MPPT 100/15 – SCC010015200R A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on Victron for details Day/night timing and light dimming option See the software section on Victron for details Programming, real-time data and history display options – Color Control GX or other GX devices: see the Venus documents on our website. – A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC010015200R GTIN 8719076025337 Voltage 12/24V Rated Charge Current 15A Nominal PV Power, 12V 220W Max. PV Short Circuit Current 15A Max. PV Open Circuit Voltage 100V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H100 x W113 x D40mm Weight 0.5Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£488.99

Victron Energy SmartSolar MPPT 250V 85A Tr VE.Can – 250/85 SCC125085411

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC125085411 GTIN 8719076050896 Voltage 12/24/48V Rated Charge Current 85A Nominal PV Power, 12V 1200W Max. PV Short Circuit Current 70A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled Yes Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£452.99

Victron Energy SmartSolar MPPT 250V 70A Tr VE.Can – 250/70 SCC125070421

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC125070421 GTIN 8719076051213 Voltage 12/24/48V Rated Charge Current 70A Nominal PV power, 12V 1000W Max. PV Short Circuit Current 35A Max. PV Open Circuit Voltage 250V absolute maximum coldest conditions 245V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled Yes Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years

...Read more View Product

£404.99

Victron Energy SmartSolar MPPT 150V 70A MC4 VE.Can – 150/70 SCC115070511

Victron Energy SmartSolar MPPT 150V 70A MC4 VE.Can – 150/70 SCC115070511 The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC115070511 GTIN 8719076051114 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A (max 30A per MC4 conn.) Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H215 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£339.99

Victron Energy SmartSolar MPPT 150V 70A Tr – 150/70 SCC115070211

Victron Energy SmartSolar MPPT 150V 70A Tr – 150/70 SCC115070211 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Remote Monitoring and Control Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. Synchronized parallel charging with Bluetooth Up to 10 units can be synchronized with Bluetooth. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. Brand Victron Energy Manufacturer Part Number SCC115070211 GTIN 8719076051404 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£69.99

Victron Energy SmartSolar MPPT 100V 15A – 100/15 SCC110015060R

Victron Energy SmartSolar MPPT 100V 15A – 100/15 SCC110015060R A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on our website for details Day/night timing and light dimming option See the software section on Victron for details Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. Brand Victron Energy Manufacturer Part Number SCC110015060R GTIN 8719076040811 Voltage 12/24V Rated Charge Current 15A Nominal PV Power, 12V 220W Max. PV Short Circuit Current 15A Max. PV Open Circuit Voltage 100V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H100 x W113 x D50mm Weight 0.6Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£135.50

Victron Energy Blue Smart IP67 Charger 24V 8A 1 Output – BPC240813006

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC240813006 GTIN 8719076038276 Voltage 24V Charge Current 8A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 96% Bluetooth Enabled Yes Plug Type CEE 7/7 Dimensions H99 x W219 x D65mm Weight 2.4Kg Warranty 5 Years Country of Manufacture India

£186.00

Victron Energy Blue Smart IP67 Charger 12V 25A 1 Output UK – BPC122547026

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC122514006 GTIN 8719076041313 Voltage 12V Charge Current 25A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 95% Bluetooth Enabled Yes Plug Type UK Dimensions H99 x W219 x D65mm Weight 2.4Kg Warranty 5 Years

...Read more View Product

£535.99

Rolls S Series S12-290 AGM 12V 260Ah 1830CCA (EN) Deep Cycle AGM Battery

Deep cycle refers to applications that typically discharge 60-80% of the battery capacity. The Rolls Series 5 S12-290 AGM Deep Cycle AGM battery features thick plates with a high density active material. This design allows for reserve energy to be stored deep within the battery plates and released during slow discharge. The Rolls AGM range are sealed, non hazardous and completely maintenance free and will suit the customer looking for a long reliable, maintenance free service life. Rolls has designed a Deep Cycle VRLA battery with high reserve capacity, long cycle life and low internal resistance, while achieving superior cranking performance. Rolls AGM batteries are the smart choice for demanding renewable applications.They are designed and built differently than standard batteries. They use more lead, heavier plates and other proprietary materials that enable them to deliver more power and capacity over many life cycles. Specifications Weight 74 kg 163 lbs Length 52.1 cm 20.51" Width 26.9 cm 10.59" Height Inc. Term. 24.5 cm 9.65" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Rope Series AGM-S Warranty See Warranty Terms Volts 12 BCI 8D Cells 6 Terminal Type LT Included Hardware Stainless Steel Nuts & Bolts Size & Thread LT Charge Charge Voltage Range 14.7V @ 25°C (77°F) Float Voltage Range 13.8V @ 25°C (77°F) Recommended Charge Current 50 A Maximum Charge Current 80 A Self-Discharge Rate Less than 2% per month at 25°C (77°F) Internal Resistance 1.8 mΩ Capacity Cold Crank Amps (CCA) 0°F / -18°C 1525 Marine Crank Amps (MCA) 32°F / 0°C 1830 Reserve Capacity (RC @ 25A) 578 Minutes Reserve Capacity (RC @ 75A) 145 Minutes Capacity Affect by Temperature 40°C(104°F) 25°C(77°F) 0°C(32°F) -15°C(5°F) 102% 100% 85% 65% Hour Rate Capacity / AMP Hour Current / AMPs @ 100 Hour Rate 290 AH 2.9 A @ 20 Hour Rate 260 AH 13 A @ 10 Hour Rate 234 AH 23.4 A @ 5 Hour Rate 214 AH 42.8 A Cut Off Voltage Constant Current Discharge VPC 1 hr 2 hr 3 hr 5 hr 8 hr 10 hr 148 78.3 58.9 42.3 28.3 23.4 View all Rolls Batteries

...Read more View Product

£434.49

Rolls Series 5 S12-230 AGM Deep Cycle Battery

Deep cycle refers to applications that typically discharge 60-80% of the battery capacity. The Rolls S Series S12-230 AGM Deep Cycle AGM battery features thick plates with a high density active material. This design allows for reserve energy to be stored deep within the battery plates and released during slow discharge. The Rolls AGM range are sealed, non hazardous and completely maintenance free and?will suit the customer looking for a long reliable, maintenance free service life. Rolls has designed a Deep Cycle VRLA battery with high reserve capacity, long cycle life and low internal resistance, while achieving superior cranking performance. Rolls AGM batteries are the smart choice for demanding renewable applications.They are designed and built differently than standard batteries. They use more lead, heavier plates and other proprietary materials that enable them to deliver more power and capacity over many life cycles. Specifications Weight 61.5 kg 135.5 lbs Length 53 cm 20.87" Width 20.9 cm 8.23" Height Inc. Term. 23.9 cm 9.41" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Rope / Plastic Handle Series AGM-S Warranty See Warranty Terms Volts 12 BCI 4D Cells 6 Terminal Type LT Included Hardware Stainless Steel Nuts & Bolts Size & Thread LT Charge Charge Voltage Range 14.7V @ 25°C (77°F) Float Voltage Range 13.8V @ 25°C (77°F) Recommended Charge Current 40 A Maximum Charge Current 65 A Self-Discharge Rate Less than 2% per month at 25°C (77°F) Internal Resistance 2.3 mΩ Capacity Cold Crank Amps (CCA) 0°F / -18°C 1200 Marine Crank Amps (MCA) 32°F / 0°C 1425 Reserve Capacity (RC @ 25A) 400 Minutes Reserve Capacity (RC @ 75A) 105 Minutes Capacity Affect by Temperature 40°C(104°F) 25°C(77°F) 0°C(32°F) -15°C(5°F) 102% 100% 85% 65% Hour Rate Capacity / AMP Hour Current / AMPs @ 100 Hour Rate 230 AH 2.3 A @ 20 Hour Rate 210 AH 21 A @ 10 Hour Rate 189 AH 18.9 A @ 5 Hour Rate 172 AH 34.4 A Cut Off Voltage Constant Current Discharge VPC 1 hr 2 hr 3 hr 5 hr 8 hr 10 hr 116 64.3 47.6 33.3 22.9 18.9 View all Rolls Batteries

£654.99

Sterling Power Pro Charge Ultra Battery Charger 24V 30A (3 out) – PCU2430

With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market. Features Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity. Battery Temperature compensation sensor included. Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated. Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections. Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability. Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V). Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses. Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish 11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel. Brand Sterling Power Manufacturer Part Number PCU2430 Voltage 24 Charger Amps Dimensions L315 x W215 x D90mm Weight (kg) 3 Warranty 5 Years

...Read more View Product

£50.71

Sterling Split Charge Diode - 90A 1 in 2 out

Sterling has developed a range of low cost split charge diodes. These diodes have enhanced performance over conventional diodes and at a lower cost. The difference is in the devices. All other split charge diode manufacturers use conventional alternator diodes, which at low current flow have about a 0.93 voltage drop. When the full rated current of these diodes is approached, the voltage drop increases to about 0.95 volts. Specification: Alt Input: 1 Battery Banks: 2 Output: 90A For cable information for all Sterling Products click here

...Read more View Product

£29.33

Sterling 3 amp 6 and 12V Battery Charger

Portable micro processor controlled charger 230V AC 50Hz only. Including battery maintenance, de-sulphation protection & battery rescue functions. LED display and can be set at 1, 2, or 3A for 6V and 12V batteries Suitable for all 100CCA-2000CCA lead-acid batteries Automatically switches to float charge and maintainer when battery is fully charged. User-friendly screen: LED displays charging status and error Overheat protection, short-circuit protection, reverse polarity protection, low input voltage and over voltage protection Charges for car, RV, motorcycle and small engine batteries Voltage DC Amps AC Plug L x W x D mm Weight Kg Part number 6 & 12 3 British 170 x 110 x 55 0.45 B123

...Read more View Product

£169.00

Mastervolt BattMan Pro

Mastervolt BattMan Pro 12/24VDC Battery Monitoring Panel Includes Shunt Battery monitor, 12/24 V DC with large, splash proof display (IP65) and power bar. Displays remaining time and stores special battery status events. An affordable battery monitor that does exactly that: providing critical information about the status of your battery bank under all circumstances. Moreover it will warn you when your battery bank is empty. Also displays the remaining time until your battery needs to be charged and stores special battery status events.

£35.71

Blue Sea 7720 BS7720 Fuse Block Safety Midi

AMI / MIDI Safety Fuse Block BS7720 Blue Sea 7720 Ignition protected for installation aboard gasoline or diesel powered boats Sealed cover protects fuses from the harsh marine environment Insulating cover satisfies ABYC/USCG insulation requirements Cover breakouts allow wire access in any direction 200A maximum with 4/0 cable Accepts Blue Sea Systems Square Format standard or custom label Fuses sold separately

£3.54

Blue Sea 5299 BS5299 Fuse ATC easyID 40A

easyID Fuse 40 Amp BS5299 Blue Sea 5299 ATC® fuses illuminate when blown easyID™ illuminated ATC® blade fuses use Light Emitting Diode (LED) technology to show that a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards. Replaces non illuminating ATO® or ATC® fuses Fast acting Two per retail package

...Read more View Product

£21.25

Blue Sea 5123 BS5123 Fuse ANL 60A

Blue Sea 5123 ANL Fuse - 60 Amp BS5123 Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only) Silver-plated connector blades for corrosion resistance Visible indication of blown condition 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks For use with Blue Sea Systems' ANL Fuse Blocks

£42.99

Blue Sea 5028 BS5028 Fuse Block ST Blade 6 Circuits with Cover

ST Blade Fuse Block - 6 Circuits with Cover BS5028 Blue Sea 5028 Consolidates branch circuits and in-line fuses These units are not supplied with labels Positive distribution bus with #10-32 stud Can be used for 24-hour circuits Models available with or without a cover Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems" Small Format Labels for circuit identification Fuse blocks with covers include 20 write-on circuit labels Tin-plated copper buses and fuse clips Accepts ring or snap fork type terminals Accepts ATO® and ATC® fast acting blade fuses Fuses sold separately

£2.75

Blue Sea 4010 BS4010 Cable Cap .700x.300 Stud Red

CableCap - Red 0.70 to 0.30 Stud BS4010 Blue Sea 4010 Insulates single stud on alternators, starters, windlasses and high amperage termination points Insulate stud type connectors on alternators, starters, windlasses and other high amperage devices

£8.27

Blue Sea 2410 BS2410 Terminal Block/Independent 10 Circuits 20A

Terminal Block 20A - 10 Circuit BS2410 Blue Sea 2410 Closed back design completely insulates power from the mounting surface Each screw pair is one isolated circuit Jumpers allow creation of common circuits

£63.06

Blue Sea 9004E BS9004e Switch Battery e-Series ON/OFF With AFD

Switch Battery e-Series ON/OFF With AFD Blue Sea PN 9004E BS9004e Switches a single battery to a single load group Includes AFD (Alternator Field Disconnect) Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting View all Blue Sea e-Series Battery Switches

Blue Sea 5112 Fuse A3T/Class T 110A

Extremely fast short-circuit response. 20,000 Ampere Interrupt Capacity (AIC)

...Read more View Product

Blue Sea 5105 Fuse MEGA 200A/32V

Most economical fuse for 100-300 Ampere circuit protection. For use with Blue Sea Systems' MEGA?/AMG? Fuse Block

...Read more View Product

£32.94

Blue Sea 5045 Fuse Block ST Blade Compact 4 Circuits with Cover

Provides surface mount circuit protection for ATO?/ATC? Fuses in a compact footprint. Ignition protected when cover is secure ?meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment Single side design allows wire entry from one side to minimize footprint Insulating cover meets ABYC/USCG insulation requirements Tin-plated copper buses and fuse clips Accepts ring or snap fork type terminals Includes 4 write-on circuit labels Fuses sold separately

£567.99

Sterling Power Pro Charge ULTRA Charger 12V 60A (3 out) PCU1260

With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market. Features Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity. Battery Temperature compensation sensor included. Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated. Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections. Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability. Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V). Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses. Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish 11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel. Brand Sterling Power Manufacturer Part Number PCU1260 Voltage 12 Charger Amps Dimensions L315 x W215 x D90mm Weight (kg) 3 Warranty 5 Years

...Read more View Product

£335.32

Sterling Power Pro Charge ULTRA Battery Charger 12V 20A (3 out) PCU1220

With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market. Features Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity. Battery Temperature compensation sensor included. Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated. Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections. Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability. Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V). Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses. Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish 11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel. Brand Sterling Power Manufacturer Part Number PCU1220 Voltage 12 Charger Amps Dimensions L260 x W215 x D90mm Weight (kg) 2 Warranty 5 Years

...Read more View Product

£219.95

Sterling Power Pro Charge ULTRA Battery Charger 12V 10A (2 out) PCU1210

With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market. Features Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity. Battery Temperature compensation sensor included. Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated. Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections. Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability. Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V). Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses. Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish 11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel. Brand Sterling Power Manufacturer Part Number PCU1210 Voltage 12 Charger Amps Dimensions L260 x W215 x D90mm Weight (kg) 2 Warranty 2 Years

...Read more View Product

£99.00

AMT12-2 Trickle Charger

AMT12-2 Trickle Charger charges Vehicle Battery from Leisure Battery with Solar Charger /Mains Hookup or only a Secondary Battery Part Number: AMT12-2 The AMT12-2 has many names Trickle Charger, Battery Maintainer, Battery Saver, Reverse Charger, Top Up Charger, Battery Equaliser, Battery to Battery trickle charger and its purpose is to keep a Source / Vehicle Battery charged & protected from damage during prolonged periods of Vehicle, Boat & Motorhome inactivity or storage. The charger feeds a low current into the Source Battery to compensate for self discharge, alarm & tracker loads while ensuring the charge of the Auxiliary / Leisure Battery is maintained. In the ideal scenario a Solar Charger or Mains Charger is attached to an Auxiliary / Leisure Battery to protect it from damage during a period of inactivity . The Trickle Charger draws a small current off to maintain the Vehicle / Source Battery. The Trickle Charger also feeds charge from the Auxiliary Battery to the Vehicle Battery until they reach 11.5V and 11.7V respectively ensuring that both Batteries are kept as healthy as possible even if no Solar Charger or Main Charger is present. For Lithium batteries the voltage thresholds for this function are set at 1V so 11.5V and 12.5V are the minimum operating voltages . The unit has 8 User selected programmes and so is suitable for use with any Auxiliary Battery Charging System including a simple Voltage Sensing Relay and a Battery to Battery Charger. A ABB-007 bluetooth module allows the unit to be configured to specific user settings to cater for different battery types and specific user requirements . All that is required is to download the app from the Apple store or google play and make the desired settings changes It does not matter the Make or Type of Charger the AMT12-2 will Charge the Vehicle Battery from the Leisure Battery . The clever software means it is compatible with conventional Alternator Vehicles, the latest Stop / Start & Euro 5/6 & Regenerative Braking Technologies. The unit has a low current draw of less than 2mA on a 12V system & so presents a very small discharge load to the Vehicle & Leisure Battery. At 1Ahr drain every 20 days the unit has negligible effect on the Battery Capacity and should easily cover the winter storage period. When a charging source either a Mains Charger or a Solar Charger is connected to the Auxiliary / Leisure Battery the AMT12-2 Trickle Charger allows a maximum of 4A (Usually considerably less) to flow from the Leisure Battery to the Vehicle Battery thus ensuring the Leisure Battery is Charged first and the Vehicle Battery second. The AMT12-2 works with all types of Lead Acid Batteries & Lithium Batteries, The Status Led gives feedback on the Trickle Charger Operation , State of Charge of the Vehicle Battery and Auxiliary Battery Conditions. There is Ignition Override Switch Enable to allow the user to externally control the charging if for some reason they wish to override the automatic settings. The AMT12-2 Trickle Charger works on 12V & 24V Battery Systems, Automatically detecting whether it is connected to a 24V or 12V system. The compact potted plastic enclosure mean it is easily fitted next to the Auxiliary Battery Charger and connected by 3 Faston connections. The Inbuilt Fuse Protection means the Installation is extremely quick and easy.

...Read more View Product

£121.00

Sterling Power 80amp Latching Relay

Pro Latch R Suitable for use as one of the following:1) Split charger ( VSR ) relay / uni + bidirectional2) Battery protect relay ( over discharge and over charge ) 3) Engine Start Protect relayWhy a latching relay over a conventional relay?A conventional relay (such as ones used in cars to switch on your lights or control power distribution on boats etc.) These are by far the most common forms of relays produced, they are very reliable and relatively low cost yet inefficient. For instance, a standard 80A/12V relay would consume about 0.45A (staying on). So, with a 70A alternator the consumption of 0.45A for the relay is of no real importance. However, if you are planning on using a 60W solar cell on a normal ‘English’ day you would expect approximately 0.4A of current all of which shall be lost across the relay, thus, rendering the solar cell useless. So lets do the maths: with the engine off, a single conventional relay will consume in 1 day 0.45A x 24 hrs =10.8A. Per week = 75.6A.A latching relay works in a completely differently way, instead of using power to “stay on “ it locks into position, so no matter if the circuit is ‘on’ or ‘off’ it engages a locking device (latch) which consumes no power to hold that position. On the down side they cannot be used straight out of the box like a standard relay. This is because they need a control circuit to work the internal latching device. It only needs a short burst of power to pull the contacts from one side to the other then the power must be removed, this, in itself, needs a control circuit. Sterling’s efficeincy is down to 0.0005A (0.5mA) where our competitors are at 4-12mA. So lets do the maths: with engine off our latching relay with active control circuit will consume 0.0005 x 24hrs = 0.012A per day which is 0.084A per week. Compared to a standard relay which uses 75.6A in a week a latching relay system will use nearly 1000 times less, and this is for only 1 relay, what happens if you need 2,3 or 4 on a larger installation, clearly this low power consumption latching relay is the only sensible choice if solar or wind is used to supplement the main alternator charging system.12V or 24V is automatically selected by the product, If less than 16.5V is detected then the unit will power up as 12V, if more than 17V the unit will power up as 24V.Fine voltage key trigger point adjustments, each function has factory preset voltage trigger points these trigger points can be customised. A magnetic swipe can be used to adjust from 10.4V- 15 V for ‘on’ voltages ( x 2 for 24V ) and 10.0V- 14.6V for ‘off’ voltages (x2 for 24V), you would perhaps customise these settings for lithium batteries. Pre set voltage can be adjusted if required. Part Number Continuous Current Max Intermittent Current Quiescent Current mA Input Voltage Output Stud Battery Protect Starter Protect Charging Mode LR80 80 500 0.5 12/24 auto 6mm off 10.9V on 12.8V off 12.4V on 13V on 13.3 off 12.9 1) Bi-directional + uni directional charging: (default voltage setting, on 13.3V, off 13.0V x 2 for 24V ) If, after the engine is switched ‘off’, and there are solar cells or wind charging systems in the boat/vehicle then the ability to charge other battery banks becomes very important. Therefore, the power consumption of the splitting device becomes extremely important and so the latching relay comes into a world of its own. There is no limit to how many battery banks that can be charged. An instant starter disengage circuit is built in to prevent starter motor high current surge damaging the product. This open circuits the relay between activating the starter motor and the bendix engaging the fly wheel. On Charge Mode the unit is preset for either side activation, i.e. whichever side of the relay reaches the trigger voltage first will activate the relay in that favoured direction. For uni-directional the relay will only be activated by a voltage in excess of 13.3V ( x 2 for 24V) on the input cable stud only, the output cable voltage will not activate the product. In the event that you need the output cable to do the activation simply reverse the cables.2) Battery Protection Mode: (default setting, ‘off’ 12.0V, ‘on’ 12.3V x 2 for 24V ) The battery protect system, protects a battery bank from premature and expensive destruction due to deep discharge or over charging. It only takes one accidental deep discharge of a battery bank to destroy that battery bank, a very expensive mistake indeed. This is most common on things such as hire boats or hire equipment. This leaves the owner with a large battery replacement bill. The battery protection relay disconnects the batteries at a preset limit in order to protect the battery bank. The unit has a built in warning system, i.e. it will switch the power off for 10 secs then back on for 1 min to give a reasonable warning to allow the operator time to complete a process, such as: start the engine or activate a battery charger to take place to help the situation ( i.e. recharge the batteries ). This could happen on a boat late at night so the extra minute allows someone to start the engine to recover the batteries. The remote control is an essential requirement to reactivate the Pro Latch R after the relay has tripped. For extra safety, the optional remote control gives the option to override the trip for 1 min in the case of emergency.Remote isolation mode: by using the remote control the battery bank can be manually isolated if required. 3) Engine Start protection mode: (default setting ‘off’ 12.4V & ‘on’ 12.6V ) This mode is designed to allow products to be safely run from an engine starter battery and to disconnect the product at such a stage as to allow the engine starter battery to retain enough power to ensure the engine will start. Refer to the Start Pro at the bottom of the next page.Optional remote control for the above products, features include: LCD displays can be selected to show input voltage or output voltage. Other alarms/information displayed via LEDs would be: High voltage trip alarm ( showing if fault on input or output ) alarm set at 16V ( x 2 for 24V ), Relay engaged or disengaged - Emergency override function ( hold select button for 5 sec to give 1 min override ) - Audible alarm function disengage ( especially boat or camper vans would not want alarms going off at 4 in the morning ). Background light on/off ( background light changes colour with cycle, red = warning, blue for online, green for offline - Sleep mode indicator - 1 min safety/ latch override ability.

...Read more View Product

£1,599.00

48V 105Ah 5.04kWh IP65 TBB Power PS5 Floor/Wall Mounted Lithium Battery Pack

What is the PS10? The PS10 or Power Stack 10 is TBB Power's latest 48V lithium battery packs, designed to deliver high energy density and exceptional performance for residential and commercial applications. With a compact design and long cycle life, this battery pack offers an ideal solution for your energy storage needs. Key features: High capacity and power output: Engineered to provide large capacity and high-power output, making them suitable for a variety of energy-intensive applications. Safe and reliable: Utilises lithium iron phosphate (LiFePO4) cells known for their safety and high energy density, ensuring reliable performance over time. Modular design: The PS5 supports up to 32 units in parallel, allowing for flexible capacity expansion to meet diverse energy demands. Space-saving installation: Supports both floor-mounted and wall-mounted installations, optimizing your available space and enhancing convenience. Cost-effective integration: High integration design reduces installation costs and simplifies wiring processes for easier setup. User-friendly features: Each battery pack comes with a mounting bracket for easy installation and handles on both sides for convenient transportation. Built-in safety mechanisms: Equipped with a built-in circuit breaker for over-current protection, ensuring safe operation. IP65 protection rating: Suitable for both indoor and outdoor use, providing durability and reliability in various environments. Compatibility: Features perfect compatibility with mainstream inverters, supporting CAN and RS485 communication for seamless integration. Real-time monitoring: Monitor battery status remotely through the NOVA APP & Web and locally via the optional TBB E4 Monitor (sold separately) and, ensuring you stay informed about your energy usage. Applications: The Power Stack 5 is ideal for a range of residential and commercial applications. It's advanced features make it perfect for energy storage systems that require high capacity and flexibility, including solar power systems, backup power solutions, and off-grid setups. This battery pack is designed to provide long-lasting performance, with a focus on safety, efficiency, and user convenience. This battery pack comes securely packaged with a user manual and installation accessories. Specifications: Nominal voltage: 48V Work voltage range: 42 – 54.75V Nominal capacity: 105Ah Maximum power: 5.04kW Peak current: 120A Maximum charge and discharge current: 105A Recommended charge and discharge current: 52.5A Self-discharging rate: <3% per month Cycle life: 6000 (90% DoD, 70% SoH), @25°C, 0.5C Operating discharge temperature: from -20°C to +55°C Operating charge temperature: from 0°C to +55°C Altitude: <2000m Humidity: 95% (without condensation) Protection: IP65 Size: 484 x 725.5 x 195 mm Weight: 54.0 kg This product is covered by a 5 year warranty

...Read more View Product

£2,699.00

48V 210Ah 10.08kWh IP65 TBB Power Floor/Wall Mounted Lithium Battery Pack

What is the PS10? The PS10 or Power Stack 10 is TBB Power's latest 48V lithium battery packs, designed to deliver high energy density and exceptional performance for residential and commercial applications. With a compact design and long cycle life, this battery pack offers an ideal solution for your energy storage needs. Key features: High capacity and power output: Engineered to provide large capacity and high-power output, making them suitable for a variety of energy-intensive applications. Safe and reliable: Utilises lithium iron phosphate (LiFePO4) cells known for their safety and high energy density, ensuring reliable performance over time. Modular design: The PS10 supports up to 16 units in parallel, allowing for flexible capacity expansion to meet diverse energy demands. Space-saving installation: Supports both floor-mounted and wall-mounted installations, optimizing your available space and enhancing convenience. Cost-effective integration: High integration design reduces installation costs and simplifies wiring processes for easier setup. User-friendly features: Each battery pack comes with a mounting bracket for easy installation and handles on both sides for convenient transportation. Built-in safety mechanisms: Equipped with a built-in circuit breaker for over-current protection, ensuring safe operation. IP65 protection rating: Suitable for both indoor and outdoor use, providing durability and reliability in various environments. Compatibility: Features perfect compatibility with mainstream inverters, supporting CAN and RS485 communication for seamless integration. Real-time monitoring: Monitor battery status remotely through the NOVA APP & Web and locally via the optional TBB E4 Monitor (sold separately) and, ensuring you stay informed about your energy usage. Applications: The Power Stack 10 is ideal for a range of residential and commercial applications. It's advanced features make it perfect for energy storage systems that require high capacity and flexibility, including solar power systems, backup power solutions, and off-grid setups. This battery pack is designed to provide long-lasting performance, with a focus on safety, efficiency, and user convenience. This battery pack comes securely packaged with a user manual and installation accessories. Specifications: Nominal voltage: 48V Work voltage range: 42 – 54.75V Nominal capacity: 210Ah Maximum power: 10.08kW Peak current: 240A Maximum charge and discharge current: 105A Recommended charge and discharge current: 52.5A Self-discharging rate: <3% per month Cycle life: 6000 (90% DoD, 70% SoH), @25°C, 0.5C Operating discharge temperature: from -20°C to +55°C Operating charge temperature: from 0°C to +55°C Altitude: <2000m Humidity: 95% (without condensation) Protection: IP65 Size: 484 x 968 x 195 mm Weight: 94.0 kg

...Read more View Product

£1,298.99

48V 105Ah 5.04kWh TBB Power rack mounted Lithium Battery

What is the ES100 II lithium battery module? The ES100 II is a state-of-the-art 48V 105Ah lithium battery module from TBB Renewable, designed for backup power systems, solar off-grid applications, and residential energy storage. This module features a high energy density and a sleek, compact design, ensuring safe and efficient energy storage with a long cycling life. With its advanced technology, the ES100 II simplifies installation and enhances overall system performance. Key features: Safe and reliable: Utilises lithium iron phosphate (LiFePO4) cells, providing superior safety and longevity compared to traditional battery technologies. Scalable capacity: Supports the connection of up to 32 modules in parallel, allowing for customizable energy solutions to meet varying demands. Easy installation: Automatically assigns communication addresses to slave modules, making the parallel connection process straightforward and efficient. High performance: Capable of short-time high-current charge and discharge with an impressive 90% depth of discharge (DoD) and a lifespan of up to 6,000 cycles. Versatile compatibility: Features external CAN communication and an RS485 communication port for seamless integration with leading inverter brands, including TBB inverters. User-friendly design: Equipped with universal positive and negative terminals for hassle-free installation and comes standard with a 300A parallel bus bar. Durable protection: The modules are IP20 protected as standard and can be easily fitted to a mounting bracket or rack cabinet (both sold separately). The cabinet meets IP65 protection standards, ensuring reliability in various environments. Intelligent management system: Each battery pack includes an advanced Battery Management System (BMS) for effective monitoring and management of modules. Convenient handling: Designed with practical pull bars for enhanced ease of operation. Applications: The ES100 II is ideal for backup power systems, solar energy storage, and off-grid applications. Its advanced features make it an excellent choice for residential energy solutions, emergency power storage, and integration with renewable energy sources. The expected service life of the ES100 II is over 6,000 cycles, ensuring long-lasting performance for your energy needs. The battery module comes packaged securely with a user manual and necessary installation hardware. Battery specifications: Nominal voltage: 48V Work voltage range: 42 – 54.75V Nominal capacity: 105Ah Peak current: 120A Maximum charge and discharge current: 105A Recommened charge and discharge current: 52.5A Self-discharging rate: <3% per month Cycle life: 6000 (90% DoD, 70% SoH), @25°C, 0.5C Operating discharge temperature: from -20°C to +55°C Operating charge temperature: from 0°C to +55°C Altitude: <2000m Humidity: 95% (without condensation) Protection: IP20 Size: 482.6 x 133.4 x 450 mm Weight: 40.0 kg

...Read more View Product

£819.99

12V/24V to 48V Battery to Battery Charger w/ reverse charging feature + Jump Start Assistance

12V / 24V to 48V DC to DC Chargers 60A input and 26A output model (1600W input and 1500W output) - E-Marking | BB1248120 Please note the part number for 24V input is also BB1248120 as they do both 12V input AND 24V input - auto detects between. - Buck Boost design, offering high efficiency (93-95%)- Simple installation and setup- Current limiting 4 stage battery charger- Lithium safe -~20A reverse charge current to 13.3V - Jumps Start Assistance Mode - 24V to 48V- BB1248120 - 1500W of output charging power - BB124865 - 750W of output charging power Smart Alternator/Euro 6 compatible- Ignition feed or Vibration Sense modes- 6 preset battery types- 6 self recovering protections- Low temperature trip for Lithium Ion batteries BB1248120 Reverse Charging Feature.The BB1248120 is able to charge in both directions. Provided there is over 52.8V on the leisure battery (54.0V if lithium) and the starter battery is below 26V the BB shall allow approximately 20A to flow back to the starter battery up to about 26.8V (float voltage). It simply allows the starter battery to remain topped up when there is surplus energy in the domestic battery. This feature will NOT drain your domestic battery - it simply takes surplus. Once your alternator / engine turns on or you provide the BB with an ignition signal the BB reverts to normal charging of the leisure battery. This mode can be disabled, but is on as default. This is ideal for allowing the starter battery to remain topped up when you have solar / wind / charger - charging up your leisure battery.

...Read more View Product

£1,059.99

Victron Energy Skylla-i 24/80(1+1) 230V – SKI024080000

The Skylla-i 24/80 is a modern and powerful battery charger that withstands the rigors of an adverse environment: heat, humidity and salt air. Features of the Skylla-i 24/80 Synchronised parallel operationSeveral chargers can be synchronised with the CAN bus interface. This is achieved by simply interconnecting the chargers with RJ45 UTP-cables. Note: Two output and three output chargers cannot be paralleled with each other. The right amount of charge for a lead-acid battery: variable absorption timeWhen only shallow discharges occur the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. Preventing damage due to excessive gassing: the BatterySafe modeIf, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Skylla-i will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached. Less maintenance and aging when the battery is not in use: the Storage modeThe storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (26,4V for 24V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘refresh’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. To increase battery life: temperature compensationEvery Skylla-i comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations of battery temperature are expected. Battery voltage senseIn order to compensate for voltage loss due to cable resistance, the Skylla-i is provided with a voltage sense facility so that the battery always receives the correct charge voltage. Suitable for AC and DC supply (AC-DC and DC-DC operation)The chargers also accept a DC supply. Use as a power supplyAs a result of the perfectly stabilized output voltage, the Skylla-i 24/80 can be used as a power supply if batteries or large buffer capacitors are not available. Li-Ion (LiFePO4) readySimple charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-Ion BMS to the remote control port of the charger. Alternatively complete control of voltage and current can be achieved by connecting to the galvanically isolated CAN bus port. Learn more about batteries and battery charging To learn more about batteries and charging batteries (including the pro’s and cons of multi-bank charging and intelligent charging), please refer to Electricity on Board. The Skylla-i Control panel provides remote control and monitoring of the charge process with LED status indication. In addition, the remote panel also offers input current adjustment that can be used to limit the input current and thus the power drawn from the AC supply. This is particularly useful when operating the charger from limited shore power or small gensets. The panel can also be used to change several battery charging parameters. Several control panels can be connected to one charger or to a set of synchronised and parallel connected chargers. Want to improve battery charging? Why not take a look at the Victron Energy Battery Sense which measures voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided – guaranteeing the correct charge-voltage. Brand Victron Energy Manufacturer Part Number SKI024080000 gtin 8719076026228 Voltage 24V Charge Current 80A Input Voltage 230V Number of Outputs 1+1 Protection Category IP21 Bluetooth Enabled No Dimensions H405 x W250 x D150mm Warranty 5 Years Country of Manufacture Malaysia

...Read more View Product

£352.99

Sterling 40A Bidirectional Battery-To-Battery Charger - FULL KIT

Full Kit - Sterling 40A Bidirectional Battery-To-Battery Charger - FULL KIT Kit consists of: 30A DC to DC charger10mm cable (select length of cable required - Starter Battery to Leisure Battery)2 x Midi Fuse Holders2 x 60amp Midi Fuses Empower Your DC to DC charging Experience with the Sterling Power BB1240 Bidirectional Battery-To-Battery Charger The Sterling Power BB1240 Bidirectional Battery-To-Battery Charger is a cutting-edge solution designed to ensure your batteries are always charged and ready to deliver optimal performance. Unmatched Charging Efficiency The Sterling Power BB1240 offers a powerful 40A charge rate, ensuring your batteries are charged quickly and efficiently. Whether you’re dealing with starting batteries or deep-cycle batteries, this charger delivers a consistent and robust charge, maximizing battery life and performance. Its advanced technology ensures that your batteries receive the precise amount of power needed, avoiding overcharging and undercharging issues. Bidirectional Charging Capability One of the standout features of the BB1240 is its bidirectional charging capability. This means it can charge one battery from another, providing ultimate flexibility and redundancy in your power system. If your leisure battery is fully charged, the BB1240 can redirect power to your starter battery, ensuring both batteries are maintained at optimal levels. This feature is particularly valuable in emergency situations, providing peace of mind that you won’t be stranded with a dead battery. Versatile and User-Friendly The BB1240 is designed for versatility and ease of use. It is compatible with a wide range of battery types, including AGM, Gel, Flooded, and Lithium. This compatibility ensures that no matter what type of battery system you have, the BB1240 can integrate seamlessly. The user-friendly interface makes it easy to monitor and control the charging process, giving you complete control over your power management. Enhanced Battery Life Proper charging is crucial to extending the lifespan of your batteries. The BB1240 utilizes advanced charging algorithms that adapt to the specific needs of your batteries, reducing the risk of sulfation and other issues that can shorten battery life. By maintaining your batteries in peak condition, the BB1240 helps you get the most out of your investment, reducing the frequency and cost of battery replacements. Built for Reliability Sterling Power is renowned for its high-quality and reliable power solutions, and the BB1240 is no exception. Built with robust components and designed to withstand the harsh marine environment, this charger is built to last. Its durable construction ensures reliable performance in all conditions, making it an ideal choice for boating enthusiasts who demand the best. Safety First Safety is a paramount concern when dealing with electrical systems, and the BB1240 excels in this regard. It features comprehensive protection mechanisms, including over-temperature protection, over-voltage protection, and short-circuit protection. These safety features ensure that both your batteries and the charger are protected from damage, giving you confidence in your power system’s safety. Compact and Lightweight Design Space is often at a premium and the BB1240’s compact and lightweight design makes it easy to install without taking up valuable space. Its sleek design allows for flexible installation options, ensuring that you can fit it into your existing setup with minimal hassle. The Sterling Power BB1240 Bidirectional Battery-To-Battery Charger is a game-changer for boating & campervan enthusiasts looking to enhance their power management systems. Its unmatched charging efficiency, bidirectional capability, versatility, and reliability make it an indispensable tool for maintaining optimal battery performance. Investing in the BB1240 means investing in peace of mind, knowing that your batteries are in the best hands possible. Don’t let power issues dampen your adventures. Equip your vehicle with the Sterling Power BB1240 and experience the ultimate in battery charging technology. Ensure your time on the water is powered by reliability and efficiency – choose the Sterling Power BB1240 today. Features 4 stage DC-DC battery charging 40A Input - current limiting Bidirectional charging - enables starter battery charging 6 selectable charge profiles for all battery types including lithium 95-98% efficient using buck boost technology Compatible with both smart alternators (Euro 6) and standard alternators 3 charger control modes: Ignition | Vibration | Voltage Sense Automatically recoverable protection for various conditions (see 'Specifications' tab) Multiple units can be wired in parallel to increase output

£699.99

Topband S Series 12V 200Ah Lithium/LifePO4 Battery

Topband battery makes our products available through the best knowledge-based distribution and service organizations for the people and businesses who rely on batteries to work, live, or get away. Topband battery makes our products available through the best knowledge-based distribution and service organizations for the people and businesses who rely on batteries to work, live, or get away. Topband battery provides advanced LiFePO4 batteries for lead acid drop-in battery solution, light and compact drop-in replacement Features Optimal cost performance Standard design, mature and stable 3500+Cycle Life Support multiple series or parallel connections Low temperature operation - Can discharge at temperatures down to -20-65°C Energy density is twice that of lead-acid battery Nominal Voltage 12.8V Battery Capacity 200Ah Recommended Charge Current 100A Recommended Discharge Current ≤100A Max Continuous Charge Current 200A Max Continuous Discharge Current 200A Cycle Life ≥3500 Dimensions L484 x W170 x H241mm Weight 26Kg Warranty 5 Years Battery Technology Lithium Battery Application Deep Cycle

...Read more View Product

£826.99

Victron Energy Lithium SuperPack 25.6V 50Ah (M8) – BAT524050705

Victron Energy Lithium SuperPack 25.6V 50Ah (M8) – BAT524050705 The SuperPack batteries are extremely easy to install, not needing any additional components.The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. The batteries can be connected in parallel. Series connection is not allowed. Features Integrated BMS and safety switch The SuperPack batteries are extremely easy to install, needing no additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. Abuse proof A lead-acid battery will fail prematurely due to sulfation: If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged). If it is left partially charged or worse, fully discharged. A Lithium-Ion battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of Li-ion compared to lead-acid. The SuperPack batteries will cut-off the charge or discharge current when the maximum ratings are exceeded. Efficient In several applications (especially off-grid solar), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%. The round-trip energy efficiency of a Li-ion battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy are required (battery operating in 70% to 100% charged state). In contrast, a Li-ion battery will still achieve 90% efficiency even under shallow discharge conditions. Can be connected in parallel The batteries can be connected in parallel. Series connection is not allowed. Use in upright position only. Brand Victron Energy Manufacturer Part Number BAT524050705 Voltage 25.6V Battery Capacity (C20) 50Ah Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) H220 x W330 x D172mm Weight 14Kg Warranty 3 Years Battery Application Deep Cycle Battery Technology Lithium Country of Manufacture China

...Read more View Product

£373.99

Victron Energy Lithium SuperPack 12.8V 60Ah (M6) – BAT512060705

Victron Energy Lithium SuperPack 12.8V 60Ah (M6) – BAT512060705 The SuperPack batteries are extremely easy to install, not needing any additional components.The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. The batteries can be connected in parallel. Series connection is not allowed. Features Integrated BMS and safety switch The SuperPack batteries are extremely easy to install, needing no additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. Abuse proof A lead-acid battery will fail prematurely due to sulfation: If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged). If it is left partially charged or worse, fully discharged. A Lithium-Ion battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of Li-ion compared to lead-acid. The SuperPack batteries will cut-off the charge or discharge current when the maximum ratings are exceeded. Efficient In several applications (especially off-grid solar), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%. The round-trip energy efficiency of a Li-ion battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy are required (battery operating in 70% to 100% charged state). In contrast, a Li-ion battery will still achieve 90% efficiency even under shallow discharge conditions. Can be connected in parallel The batteries can be connected in parallel. Series connection is not allowed. Use in upright position only. Brand Victron Energy Manufacturer Part Number BAT512060705 gtin 8719076047544 Voltage 12.8V Battery Capacity (C20) 60Ah Terminal Type M6 Terminal Layout Left Hand Positive Dimensions (Including Terminals) H213 x W229 x D138mm Weight 9.5Kg Warranty 3 Years Battery Technology Lithium Battery Application Deep Cycle Country of Manufacture China

...Read more View Product

£520.99

Victron Energy Peak Power Pack 12.8V 30Ah – PPP012030000

Victron Energy Peak Power Pack 12.8V 30Ah – PPP012030000 The Victron Energy Peak 12.8V 30Ah Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built-in charger allowing charging from the vehicle electrical system whilst travelling with the caravan. This way the pack will be fully charged upon arrival to the camping site. If necessary, the charging is possible using the supplied adapter via a grid outlet. Charging from a solar panel is also possible. Features Peak Power Pack 12.8V 30Ah Lightweight and easy to install– Ideal for mobile applications. Effective protection against improper use– Ideal for solar power and other applications where excessive discharge might quickly cause damage to lead acid batteries. Storage mode– Reduces power consumption to almost zero. Prevents damage due to excessive discharge of the battery during storage. Remote control with status indicator – Push button (supplied) with a dual-colour LED status indicator: Short push of the button: high capacity output activated for 30 minutes (mover applications), red LED Hold down for 2 seconds: high capacity output always activated, slow flashing red LED. Hold down for 5 seconds: storage mode, blue LED flashes 10 times Battery is charged via input 1: slow flashing blue LED Battery fully charged: blue LED Overload or overheating: flashing red LED VE.Direct port: can be connected to a PC or smartphone(VE.Direct to USB or VE.Direct Bluetooth Smart dongle required) Operation: Output 1: on / 30-minute timer / off Output 2: on/off Input 1: on/off Monitoring: Battery voltage Temperature and alarms Brand Victron Energy Manufacturer Part Number PPP012030000 gtin 8719076017325 Voltage 12.8V Battery Capacity (C20) 30Ah Dimensions (Including Terminals) H132 x W190 x D172mm Weight 3.8Kg Warranty 3 Years Battery Technology Lithium Country of Manufacture India

...Read more View Product

£399.00

Victron Energy Peak Power Pack 12.8V 20Ah – PPP012020000

The Victron Energy Peak 12.8V 20Ah Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built-in charger allowing charging from the vehicle electrical system whilst travelling with the caravan. This way the pack will be fully charged upon arrival to the camping site. If necessary, the charging is possible using the supplied adapter via a grid outlet. Charging from a solar panel is also possible. Features Peak Power Pack 12.8V 20Ah Lightweight and easy to install– Ideal for mobile applications. Effective protection against improper use– Ideal for solar power and other applications where excessive discharge might quickly cause damage to lead acid batteries. Storage mode– Reduces power consumption to almost zero. Prevents damage due to excessive discharge of the battery during storage. Remote control with status indicator – Push button (supplied) with a dual-colour LED status indicator: Short push of the button: high capacity output activated for 30 minutes (mover applications), red LED Hold down for 2 seconds: high capacity output always activated, slow flashing red LED. Hold down for 5 seconds: storage mode, blue LED flashes 10 times Battery is charged via input 1: slow flashing blue LED Battery fully charged: blue LED Overload or overheating: flashing red LED VE.Direct port: can be connected to a PC or smartphone(VE.Direct to USB or VE.Direct Bluetooth Smart dongle required) Operation: Output 1: on / 30-minute timer / off Output 2: on/off Input 1: on/off Monitoring: Battery voltage Temperature and alarms Brand Victron Energy Manufacturer Part Number PPP012020000 gtin 8719076017318 Voltage 12.8V Battery Capacity (C20) 20Ah Dimensions (Including Terminals) H132 x W190 x D172mm Weight 3.8Kg Warranty 3 Years Battery Technology Lithium Country of Manufacture India

...Read more View Product

£909.99

Combined Solar & Split Charge kit (Pro 270w Flex Panel & Sterling BBS1230)

Combined Solar & Split Charge kit (Pro 270w Flexible Panel & Sterling BBS1230) The new combined battery-to-battery charger and solar regulator from Sterling Power maximizes the operational usage of the battery-to-battery charger. It does this by adding a solar operation to the product both when the vehicle is in motion and moreover when the vehicle is stationary. This makes it, in effect, also a free 350W solar regulator when the vehicle is stationary. This product has all the benefits of the standard 30A Battery to Battery charger when the engine is on. This kit comprises of the following: Sterling BBS1230 combined B2B Split charger / Solar MMPT1 x 270w Pro Semi-Flexible Monocrystalline Solar Panel - 5 year warranty6mm (5m) Solar Extension Cables with MC4 connectorsDouble Entry Roof GlandResettable Circuit Breaker16mm Battery Cable ( 1 to 10m ) Red & Black2 x Victron Mega Fuse Holders2 x 60amp Mega FusesCable Terminal LugsSikaflex 522 Features 1) Multiple Activation Modes: Automatic for most non-vehicle applications, Manual for remote activation. Regenerative braking (requiring ignition feed), Automatic regenerative braking, requiring no ignition feed. 2) Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mode allows you to override this. 3) Safety features: 100% fire proof plastic box. No screws to corrode. Thermal power reduction. Multi-stage fan cooling 4) Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down. 5) Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages. 6) B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V). 7) Customizable Profile: Choose your own charging profile on the front panel. 8) 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid. 9) 4-stage battery charging: The B2B charges batteries between 5-20 times faster than a stand-alone alternator. 10) Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking). Remote control is optional. Brand Sterling Power Manufacturer Part Number BBS1230 DC V (in) 12V DC V (out) 12V Current (A) 30A input, 350W solar Dimensions L190 x W160 x D50mm Weight (kg) 1.5Kg Warranty 2 Years

...Read more View Product

£671.50

Combined Solar & Split Charge kit (Victron 370w Panels & Sterling BBS1230)

Combined Solar & Split Charge kit (Victron 370w Panels & Sterling BBS1230) The new combined battery-to-battery charger and solar regulator from Sterling Power maximizes the operational usage of the battery-to-battery charger. It does this by adding a solar operation to the product both when the vehicle is in motion and moreover when the vehicle is stationary. This makes it, in effect, also a free 350W solar regulator when the vehicle is stationary. This product has all the benefits of the standard 30A Battery to Battery charger when the engine is on. This kit comprises of the following: Sterling BBS1230 combined B2B Split charger / Solar MMPT2 x Victron 185w Monocrystalline Solar Panel Solar Panel Z Bracket Mount (Call if you require other mount types)6mm (5m) Solar Extension Cables with MC4 connectorsDouble Entry Roof GlandResettable Circuit Breaker16mm Battery Cable ( 1 to 10m ) Red & Black2 x Victron Mega Fuse Holders2 x 60amp Mega FusesCable Terminal Lugs Features 1) Multiple Activation Modes: Automatic for most non-vehicle applications, Manual for remote activation. Regenerative braking (requiring ignition feed), Automatic regenerative braking, requiring no ignition feed. 2) Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mode allows you to override this. 3) Safety features: 100% fire proof plastic box. No screws to corrode. Thermal power reduction. Multi-stage fan cooling 4) Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down. 5) Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages. 6) B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V). 7) Customizable Profile: Choose your own charging profile on the front panel. 8) 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid. 9) 4-stage battery charging: The B2B charges batteries between 5-20 times faster than a stand-alone alternator. 10) Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking). Remote control is optional. Brand Sterling Power Manufacturer Part Number BBS1230 DC V (in) 12V DC V (out) 12V Current (A) 30A input, 350W solar Dimensions L190 x W160 x D50mm Weight (kg) 1.5Kg Warranty 2 Years

...Read more View Product

£1,049.00

Topband T Series 12.8V 200Ah Lithium Battery

TOPBAND battery provides an advanced Lithium drop-in battery solution， Widely used in RV, fishing boats, cleaning machines, golf carts, solar energy storage systems and other fields. Product features Wide operating temperature range, supports low-temperature heating Equipped with CAN/RS485 interface, can be compatible with various inverters UL1973/UN38.3/IEC/62619/CE certified, safety and quality guaranteed Bluetooth communication function, support Bluetooth APP upgrade firmware 6000+Cycles, 80% DPD 0.2C/0.2C Support multiple series or parallel connections Voltage 12.8V Battery Capacity 200Ah Rated Energy 2.56kWh Internal Resistance(@1kHz AC) ≤20mΩ Charge Voltage 14.0-14.6V Float Voltage 13.6-13.8V Recommended Charge Current 100A Recommended Discharge Current ≤100A Max Continuous Discharge Current 200A Cycle Life ≥6000 Dimensions L505 x W172 x H225mm Weight 27Kg Warranty 5 Years Battery Technology Lithium Battery Application Deep Cycle

...Read more View Product

£269.99

Sterling Power Solar Charger Controller – MPPT50

These solar regulators are designed to harness the maximum amount of energy from your solar panels and deliver a 3 stage charging cycle to your batteries @ 95% efficiency! Features – Performance category MPPT – Max in solar input power 600W – 1200W – Max solar input voltage 135V – System voltage 12 V / 24 / 36 / 48V – Display and information LCD panel – USB output 5 V / 2.4A – Load output 50A max – Operation Wi-Fi Brand Sterling Power Manufacturer Part Number MPPT50 System Voltage 12 V / 24 / 36 / 48V Load Output 50A max Max Solar Input Voltage 135V Max In Solar Input Power 600W – 1200W USB Output 5 V / 2.4A Wifi Yes Dimensions (Including Terminals) H240 x W178 x D73mm Weight 2.3Kg Warranty 2 Years Datasheet Sterling Power Solar Charger Controller – MPPT50 Datasheet Manual Sterling Power Solar Charger Controller – MPPT50 Manual

...Read more View Product

£169.99

Sterling Power MPPT30 Solar Charger Controller

These solar regulators are designed to harness the maximum amount of energy from your solar panels and deliver a 3 stage charging cycle to your batteries @ 95% efficiency! Features – Performance category MPPT – Max in solar input power 360W – 800W+ – Max solar input voltage 100V – System voltage 12V / 24V auto detect – Display and information LCD panel – USB output 5V / 2.4A – Load output 30A max – Operation Wi-Fi Brand Sterling Power Manufacturer Part Number MPPT30 System Voltage 12V / 24V auto detect Load Output 30A max Max Solar Input Voltage 100V Max In Solar Input Power 360W – 800W+ USB Output 5V / 2.4A Wifi Yes Dimensions (Including Terminals) H240 x W178 x D63mm Weight 1.5Kg Warranty 2 Years Datasheet Sterling Power MPPT30 Solar Charger Controller Datasheet Manual Sterling Power MPPT30 Solar Charger Controller Manual

...Read more View Product

£399.99

NDS Energy PWS GOLD 12V 30A 3 in 1 Hybrid Charger - DC to DC, MPPT & Battery Charger

NDS Energy PWS GOLD 12V 30A 3 in 1 Hybrid Charger - DC to DC, MPPT & Battery Charger The NDS Power Service Gold unit is a 3-in-1 hybrid charging system, ideal for use in motorhomes and campervans, and boats. It will take care of the leisure battery by charging from the alternator (when the engine is running), from a solar panel (up to 250W) and from 240V mains as well. It can be used with any kind of lead-acid battery - Gel, AGM, flooded acid and LiFePO4 lithium batteries. Charging is done in 5 stages including desulfation (not when set for lithium), ensuring a full recharge, as well as improving the battery's general performance and extending its life. Installation of the Power Service Gold charger is straightforward and detailed instructions are supplied. Technical journalist Peter Rosenthal installed a Power Service Gold charger in his self-built campervan and wrote about the installation in MMM, the UK's leading motorhome magazine. You can read the article by clicking on the link below. Suitable for use with "smart" alternators and lithium batteries. Features 30A DC-DC charger compatible with all alternator types (standard, Euro 5, Euro 6 +) 20A wide input voltage range (90-264V AC) mains charger PWM solar controller with 250W max. panel capacity 5-stage charging Fast and deep charging of leisure batteries Can be used with all lead-acid (flooded, sealed, AGM, gel etc.) and lithium batteries Selectable (via jumper) multi-stage charging profiles Auxiliary connection for existing systems (CBE, Sargent, Schaudt, Nordelettronica etc.) Engine and leisure batteries are kept separated to prevent accidental discharge Protection against over-temp, short circuit, reverse polarity, over-current, over-voltage, low-temp (lithium only) LED status indicators and audible warning User-replaceable fuses Supplied with 2-pin Euro to IEC power lead Specification Nominal input voltage Alternator: 12V DC Solar panel: 12V DC Mains: 230V AC / 50Hz Input voltage range Alternator: 11-15V DC Solar panel: 12-28V DC Mains: 90-264V AC / 47-63Hz Maximum input current Alternator: 34A Solar panel: 15A Mains: 3.5A Input sources recommend power Alternator: ≥90A Solar panel: ≤250W Mains: ≥450W Nominal output voltage: 12V DC Output voltage range: 11-16V DC Maximum charging current Alternator: 30A Solar panel: 15A Mains: 20A Galvanic insulation: From DC - No / From AC - Yes Maximum efficiency: 92% Cooling: Fan-assisted Charging type: 5-stage Battery types: All lead-acid (wet, sealed, AGM, Gel) and lithium Recommended battery capacity: ≥90Ah Euro6 & 'Smart' alternator compatible: Yes Cable connections: 7-way screw terminal block (16mm² max., recommended 10mm² min.) Mains power cable: 2-pin Euro plug Status indicators: 2 x LED + buzzer Protection: Short-circuit, reverse-polarity, over-temp, over-current, over-voltage, under-temp (lithium only) Self-consumption: 13mA Operating temperature range: -20 to +50°C Overall dims: 228 (L) x 135 (W) x 95 (H) mm

£718.00

Pylontech RT12100G31 12V 100AH Lithium Battery Pylon Tech

RT12100G31 - new to Pylontech. The Pylontech RT12V is an all-purpose 12V Lithium-ion battery. Each battery incorporates its own battery management system with over/undervoltage and high/low temperature protection. Monitoring is available through Bluetooth or a Canbus connection. This battery weighs 12 KG. For systems of 24 or 48V, batteries can be connected in series. Up to 16 batteries can be connected together to increase the systems capacity. The Pylon RT12 battery has a built-in heating film which automatically heats the battery to enable its use in minus temperature environments. The elements operates via the external charger connection. ManufacturerPylon Technologies CommunicationCanbus or Bluetooth Dimensions (mm) (H x W x D)325 x 173.5 x 226 IP RatingIP67 Nominal Voltage12.8 Volts Recommended charge/discharge50A Max charge/discharge100A Working temperature-40℃ to 60℃ Nominal Capacity100ah

...Read more View Product

£769.00

Steca Tarom 60A Mppt Solar Controller (M-Type), With Two Mppt Solar Trackers / Inputs For An Off-Grid Solar System

Van Junkies are proud to offer this advanced controller from Steca Electronik; the global leader in off-grid solar electronics. All Steca controllers are able to control the entire energy flow in any power system, whilst ensuring optimal battery maintenance. German design, engineering and manufacturing ensure unrivalled standards of quality and efficiency. This Steca Tarom M-Type 60A MPPT charge controller sets unprecedented standards in the field of Maximum Power Point trackers. Due to its continued outstanding achievements in the solar industry, it was awarded the renowned OTTI Innovation Prize and the Intersolar Award in 2014. With two independent MPP trackers and two solar inputs, this MPPT controller can easily handle two different solar module arrays of varying sizes. The controller is designed to protect batteries whilst charging them, providing automatic cut off to prevent over-charging and deep discharge. It comes with an automatic electronic fuse and a full range of electronic protection functions, including protection against: overload, short circuit, high voltage, reverse polarity, high temperature, lightning and transient surges, reverse current at night. This M-Type model has the ability to communicate with up to 22 Steca Tarom MPPT S-Type controllers in one network (connected to the same battery bank), offering possibilities for system expansion at a later date. When multiple S-type controllers are connected, this controller will intelligently synchronise their actions and charging stages to ensure that a safe and stable voltage is maintained accross the entire system, regardless of varying cable lengths. Other key features include: Extremely high reliability, with an integrated self-test function and a long 5 year warranty Unique MPP trackers which work constantly at high efficiency ratings of up to 99% Compatible with lead-acid, lithium-ion or NiCd batteries, with personalised settings for each type Automatic data logging of energy values for 20 years, with a MicroSD slot for logging of detailed values Intelligent output terminals (can be programmed for load management, e.g. to activate a generator when the battery is low or to divert excess energy to an electrical appliance) Programmable current limiting function which allows the input current to be limited to a specific value (e.g. for temporary charging of a smaller battery bank) Easy to use LCD display This solar charge controller is suitable for solar panels with a maximum power of up to 850W (12V battery bank), 1700W (24V battery bank) or 3400W (48V battery bank) and is also compatible with 36V or 60V batteries by activating advanced settings in the expert menu. Controller specifications: Nominal battery voltage: 12V / 24V / 48V Rated charging current: 60A Solar input voltage up to 200V and power up to 3.4kW 3 pairs of terminals (two solar inputs, battery) MicroSD slot for advanced data logging Graphical LCD display Max. DC-DC efficiency: 99.4% (Ubatt=48 V; Uin=70 V; P=0.65*Pnom) MPP efficiency: 99.9% (static), 99.8% (dynamic) Minimum voltage to operate: 9.5V Self-consumption: < 2W Working temperature: -25°C to +50°C Enclosure: IP31 (indoor) Size: 294 x 335 x 130 mm Weight: 6.3 kg Mounting holes for ease of installation This product is covered by a 5 year warranty. Steca Datasheet Steca Tarom 60A Mppt Solar Controller Datasheet Steca User Manual Steca Tarom 60A Mppt Solar Controller User Manual

...Read more View Product

£589.00

Steca Tarom 60A Mppt Solar Controller (S-Type), With Two Mppt Solar Trackers / Inputs For An Off-Grid Solar System

Van Junkies are proud to offer this advanced controller from Steca Electronik; the global leader in off-grid solar electronics. All Steca controllers are able to control the entire energy flow in any power system, whilst ensuring optimal battery maintenance. German design, engineering and manufacturing ensure unrivalled standards of quality and efficiency. This Steca Tarom S-Type 60A MPPT charge controller sets unprecedented standards in the field of Maximum Power Point trackers. With two independent MPP trackers and two inputs, this MPPT controller can easily handle two different solar module arrays of varying sizes. The controller is designed to protect batteries whilst charging them, providing automatic cut off to prevent over-charging and deep discharge. It comes with an automatic electronic fuse and a full range of electronic protection functions, including protection against: overload, short circuit, high voltage, reverse polarity, high temperature, lightning and transient surges, reverse current at night. Several of these Steca Tarom MPPT controllers can be linked in a single network to enable system expansion at a later date. Please note, in a large system with multiple Tarom MPPT controllers connected to the same battery bank, one controller must be the M-Type model, to enable effective communication amongst the S-type controllers and synchronisation of the charging process. Other key features include: Extremely high reliability, with an integrated self-test function and a long 5 year warranty Unique MPP trackers that work constantly at high efficiency ratings of up to 99% Compatible with all lead acid batteries, e.g. AGM / Gel / flooded. Automatic data logging of energy values for 20 years and an easy to use LCD display This solar charge controller is suitable for solar panels with a maximum power of up to 850W (12V battery bank), 1700W (24V battery bank) or 3400W (48V battery bank) and is also compatible with 36V or 60V batteries by activating advanced settings in the expert menu. Controller specifications: Nominal battery voltage: 12V / 24V / 48V Rated charging current: 60A Solar input voltage up to 200V and power up to 3.4kW 3 pairs of terminals (two solar inputs, battery) Graphical LCD display Max. DC-DC efficiency: 99.4% (Ubatt=48 V; Uin=70 V; P=0.65*Pnom) MPP efficiency: 99.9% (static), 99.8% (dynamic) Minimum voltage to operate: 9.5V Self-consumption: < 2W Working temperature: -25°C to +50°C Enclosure: IP31 (indoor) Size: 294 x 335 x 130 mm Weight: 6.3 kg Mounting holes for ease of installation This product is covered by a 5 year warranty. Steca Datasheet Steca Tarom 60A Mppt Solar Controller Datasheet Steca User Manual Steca Tarom 60A Mppt Solar Controller User Manual

...Read more View Product

£1,469.99

Morningstar Tristar 60A Mppt 600V Charge Controller (With Dc Transfer Switch) For Off-Grid Or Existing On-Grid Solar Applications

This high voltage Morningstar TriStarTM 60A MPPT 600V charge controller with DC transfer switch is suitable for large off-grid solar power systems with high input voltages, or retro-fitting existing grid-tie systems with a battery backup component. It uses TrakStar TechnologyTM, which provides the very best automatic power point tracking by sweeping the I-V curve faster than any other MPPT controller on the market, and maximising the energy harvest of the off-grid system. With 97.9% peak efficiency, low self-consumption and subsequently less power losses through the off-grid system, this MPPT controller guarantees an excellent return on investment. Due to its high voltage capabilities, this unique controller can be used with new grid-tie PV installations or added to existing grid-tie PV systems, to allow storage of excess energy in a back-up battery bank. This can be achieved without changing the existing PV array configuration, and can even enable incremental adding of solar panels to an array with no string sizing issues and Voc voltages upto 525 Voc. This action allows fewer combined circuits and lower current for long wire runs from the array to the controller. The DC transfer switch and enhanced wiring disconnect box allows 60A continuous battery current from your solar array to be stored in a battery bank or to be manually switched to the grid-tie inverter. Other key features include: High voltage capacity, with a maximum input voltage of 600V that reduces voltage drop and wire costs Used in conjunction with new or existing grid-tie power systems to allow alternative battery storage Extremely high reliability, with no cooling fans or moving parts and a robust thermal design for high operating temperatures Incredibly high peak efficiency of 97.9% - an outstanding feat within the solar industry First 600V PV controller to offer extensive communication capabilities with internet access for custom settings, data logging and remote monitoring The controller is pre-set to protect 48V batteries whilst charging them, providing automatic cut off to prevent over-charging and deep discharge. It is also programmable to set for 24V, 36V and 60V battery banks. It comes with a full range of electronic protection functions: overload, short circuit, high voltage, reverse polarity, high temperature, lightning and transient surges, reverse current at night. This controller can work with sealed, gel and flooded batteries. The maximum allowed input solar power for this controller is: 3200W (48V). Controller specifications: Nominal system voltage: 48V Maximum output current: 60A Solar input voltage up to 600V 3 pairs of terminals (input, battery, output), plus ports for computer connectivity and an optional remote meter Multi-colour LEDs to indicate charging and battery status Temperature sensor for automatic compensation (-5mV/C/cell) operating between -30°C and +80°C Battery operating voltage range: 16 - 72V Self-consumption: < 3.5W Working temperature: -40°C to +45°C Humidity: 100% non-condensing Enclosure: IP20 (indoor and vented) Size: 544 x 221 x 150 mm Weight: 12.75 kg Mounting holes for ease of installation

£389.99

NDS Energy PWS PSB 12V 40A DC-DC Charger - PSB12-40

MAXIMUM CHARGING POWER, WHILE TRAVELLING.EVEN WITH EURO6 AND SMART ALTERNATOR! Charge while you travel, arrive at your destination with 100% batteries, don’t run out of power, avoid all generators and extra fuel, travel lighter and above all enjoy your holidays! PSB Power Service: up to 40A of power always available to charge your batteries quickly, anywhere. The new DC-DCs of the POWERSERVICE PSB series are powerful travel chargers that are also highly efficient with Smart Alternator (Euro 6) vehicles. High charging currents (up to 40A) make PSBs ideal for fast charging Lithium batteries or high capacity traditional systems; Buck Booster technology, stabilizes the charge making PSBs ideal for all vehicles or boats, where fast and correct charging of leisure batteries of any technology is important: Lithium LiFePO4, AGM, Gel, Flooded. All PSBs are equipped with the intelligent OPTICHARGE system which optimises the performance and yield of Leisure batteries by selecting a specific charging curve for each technology and specific charging curve selection and the state of charge analysis algorithm developed by the NDS Software Team. The POWERSERVICE PSB is the only device on the market with an AUX connection, allowing the PSB to be installed in vehicles with existing charging systems. When the vehicle is in motion, the AUX relay shifts all the loads connected in the control unit to the engine battery, thus bypassing the existing parallel charging connection, so the leisure battery will be recharged directly, at maximum performance. As well as power, safety is also important. PSB protection systems prevent the alternator from overloading and the engine battery from running out of power. WHY CHOOSE POWERSERVICE PSB Full charge in less time, to have full autonomy during your stops. Extend the life of your batteries with specific charging curves for all battery technologies. Main Features: Up to 40A power Selectable charging power (for higher performance models) Up to 8 charging stages Buck Booster technology for super stable charging Aux bypass for direct connection of extra loads to the alternator Opticharge firmware N-Bus communication protocol Optional Bus display Specific charging curve for batteries: Lithium LiFePO4, AGM, Gel, Flooded Alternator and starter battery always safe from overload, unexpected stress and Undervoltage Nominal Voltage Input 12V Maximum Charging Current 40A Nominal Voltage Output 12V Alternator Minimum Power 90A Warranty 2 Years

...Read more View Product

£447.99

NDS Energy PWS PSB 12V 40/60/80A DC-DC Charger - PSB12-80

MAXIMUM CHARGING POWER, WHILE TRAVELLING.EVEN WITH EURO6 AND SMART ALTERNATOR! Charge while you travel, arrive at your destination with 100% batteries, don’t run out of power, avoid all generators and extra fuel, travel lighter and above all enjoy your holidays! PSB Power Service: up to 80A of power always available to charge your batteries quickly, anywhere. The new DC-DCs of the POWERSERVICE PSB series are powerful travel chargers that are also highly efficient with Smart Alternator (Euro 6) vehicles. High charging currents (up to 80A) make PSBs ideal for fast charging Lithium batteries or high capacity traditional systems; Buck Booster technology, stabilizes the charge making PSBs ideal for all vehicles or boats, where fast and correct charging of leisure batteries of any technology is important: Lithium LiFePO4, AGM, Gel, Flooded. All PSBs are equipped with the intelligent OPTICHARGE system which optimises the performance and yield of Leisure batteries by selecting a specific charging curve for each technology and specific charging curve selection and the state of charge analysis algorithm developed by the NDS Software Team. The POWERSERVICE PSB is the only device on the market with an AUX connection, allowing the PSB to be installed in vehicles with existing charging systems. When the vehicle is in motion, the AUX relay shifts all the loads connected in the control unit to the engine battery, thus bypassing the existing parallel charging connection, so the leisure battery will be recharged directly, at maximum performance. As well as power, safety is also important. PSB protection systems prevent the alternator from overloading and the engine battery from running out of power. WHY CHOOSE POWERSERVICE PSB Full charge in less time, to have full autonomy during your stops. Extend the life of your batteries with specific charging curves for all battery technologies. Main Features: Up to 80A power Selectable charging power (for higher performance models) Up to 8 charging stages Buck Booster technology for super stable charging Aux bypass for direct connection of extra loads to the alternator Opticharge firmware N-Bus communication protocol Optional Bus display Specific charging curve for batteries: Lithium LiFePO4, AGM, Gel, Flooded Alternator and starter battery always safe from overload, unexpected stress and Undervoltage Nominal Voltage Input 12V Maximum Charging Current 80A Nominal Voltage Output 12V Alternator Minimum Power 140A Warranty 2 Years

...Read more View Product