Victron Battery Chargers

Victron Energy - Battery switch ON/OFF 275A - VBS127010010

Victron Energy – Battery switch ON/OFF 275A – VBS127010010 The Battery Switch has a continuous current rating and is suitable for battery systems up to 48V. It has a unique ergonomic and aesthetic knob design for easy operation. Usages The Battery Switch can be used to isolate a battery from DC loads and/or DC charge sources. It is used to preserve battery charge in case a system is unattended, for system maintenance or in an emergency. It can also be used to parallel connect the house battery to the starter battery to supplement a flat starter battery or a flat house battery in case of an emergency. The Battery Switch can be either surface or panel mounted, providing flexibility during install. It features 4 easily removable side panels for cable access. The knob is removable for isolation or safety purposes. The Battery Switch meets the ISO8846 Ignition Protection standard and is suitable for use in an engine room. Brand: Victron Energy Voltage: 48V Cranking Rating (5 seconds): 1250A Continuous Current: 275A

...Read more View Product

£13.33

Victron Energy Fuse holder for MEGA-fuse – CIP000100001

Victron Energy – Fuse holder for MEGA-fuse – CIP000100001 Manufacturer: Victron EnergyPart Number: CIP000100001Weight: 0.01kgWarranty: 5 Years

...Read more View Product

£261.40

Victron Orion-Tr Smart 12V 30A Non Isolated DC-DC B2B Split Charge Kit

Victron Orion-Tr Smart 12V 30A Non-Isolated DC-DC B2B Split Charge Kit. These Battery to Battery (B2B) charging kits are designed to charge your vehicle's leisure battery whilst driving and are appropriate for vehicles with Smart alternators, usually Euro 5 / Euro 6 compliant alternators. This Kit consists of: Victron Orion 30amp Non-Isolated Battery to Battery Charger (ORI121236140)16mm Heavy Duty Flexible Battery Cable (2m of black as standard and variable red up to 7m depending on installation location)2 x Victron Midi Fuse Holders2 x Victron 60amp Midi Fuses8 x 16mm M8 Battery Lugs Features Bluetooth Smart enabled Any Bluetooth-enabled smartphone, tablet or another device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable - Battery charge algorithm (configurable) or fixed output. - Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float - For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged. - For lithium batteries absorption time is fixed, default 2 hours. - Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected DC to DC (Battery to Battery) Wiring Diagram, Information and Help Datasheet Victron Orion Non-Isolated Datasheet Installation and Help Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here Wiring Diagram Video

...Read more View Product

£309.99

Victron Orion XS Buckboost 50A Non Isolated DC-DC B2B Split Charge Kit

Victron Orion XS Buckboost 50A 700w Non Isolated DC-DC B2B Split Charge Kitt. These Battery to Battery (B2B) charging kits are designed to charge your vehicle's leisure battery whilst driving and are appropriate for vehicles with Smart alternators, usually Euro 5 / Euro 6 compliant alternators. This kit consists of: Victron Orion XS Buckboost 50amp Non-Isolated Battery to Battery Charger (ORI121217040)25mm Heavy Duty Flexible Battery Cable (2m of black as standard and variable red up to 7m depending on installation location)2 x Victron Midi Fuse Holders2 x Victron 100amp Midi Fuses8 x 25mm M8 Battery Lugs PLEASE NOTE ONLY 2M OF NEGATIVE CABLE IS REQUIRED AS THE CHARGER CAN BE GROUNDED TO THE NEAREST GROUND (CHASSIS, BUSBAR ETC). Features Fully configurable Engine shutdown detection Intelligent charge algorithms Efficient cooling Works with VictronConnect Overview of the Victron Orion XS Buckboost 50AThe Victron Orion XS Buckboost 50A is a high-power, non-isolated DC-DC charger designed to efficiently manage power supply and charging in a range of applications, from marine and automotive to off-grid solar systems. Its primary function is to ensure a stable output voltage from a variable input voltage source, making it ideal for systems where voltage fluctuations are common.Key Features and Technical Specifications1. High Power Output: The charger boasts a substantial power output of 700W, capable of handling significant energy demands.2. Wide Input Voltage Range: It operates efficiently across a broad input voltage range, accommodating fluctuations and ensuring a stable output.3. Advanced Buck-Boost Technology: The charger employs state-of-the-art buck-boost technology, enabling it to either step down (buck) or step up (boost) the input voltage to achieve the desired output voltage.4. Adjustable Output Voltage: Users can adjust the output voltage to suit specific requirements, providing flexibility across different battery types and systems. 5. Non-Isolated Design: The non-isolated nature of this charger allows for a more compact and efficient design, making it suitable for applications where space is at a premium.6. Smart Cooling System: The device includes an intelligent cooling system that adjusts the fan speed based on the load, ensuring optimal performance and longevity.7. Remote Monitoring and Control: Integration with Victron's remote management platforms, such as the VictronConnect app, allows for easy monitoring and adjustments.8. Built-in Safety Features: The charger is equipped with several safety features, including over-temperature protection, short-circuit protection, and reverse polarity protection. DC to DC (Battery to Battery) Wiring Diagram, Information and Help Wiring Diagram Video

...Read more View Product

Out of Stock

£121.99

Victron Monocrystalline panel 175W-12V Mono 1485x668x30mm series 4a SPM041751200

This panel has now been superseded and upgraded to the Victron 185w Solar Panel Victron Energy Solar Panel 12V 175W Mono series 4a – SPM041751200 Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. This panel is available as part of our 175w Solar Kit and our 350w Solar Kit Brand Victron Energy Manufacturer Part Number SPM041751200 GTIN 8719076040361 Voltage 12V Nominal Power 175W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Dimensions L1485 x W668 x D30mm Weight 11Kg Warranty 5 Years This panel is available as part of our 175w Solar Kit and our 350w Solar Kit Datasheet BlueSolar Monocrystalline Datasheet Manual BlueSolar 175w Installation Manual

£16.99

Victron Energy RJ45 UTP Cable 5m – ASS030065001

A 5m cable to connect Phoenix Inverter Control, VE Interface MK3-USB, and VE.Bus connections between multiple VE.Bus devices and GX devices. Brand Victron Energy Manufacturer Part Number ASS030065001 GTIN 8719076019237 Cable Length 5m Country of Manufacture Taiwan

...Read more View Product

£63.99

Victron Energy SmartShunt 300A/50mV SHU050130050

Victron Energy SmartShunt 300A SHU050130050: Affordable, Accurate Battery Monitoring Solution If you're looking for a precise and cost-effective way to monitor your battery’s health, the Victron Energy SmartShunt 300A SHU050130050 is a fantastic choice. Designed for those who want detailed, accurate insights without breaking the bank, this SmartShunt is a must-have for any off-grid setup, camper van, RV, or marine application. Here’s what makes it a game-changer: Compact Yet Powerful The SmartShunt 300A combines powerful monitoring capabilities within a compact, easy-to-install design. It’s an all-in-one battery monitor without the need for a display since it connects directly to your smartphone or tablet via Bluetooth. Simply download the free VictronConnect app, and you’re ready to track your battery’s performance on your device. Low-Cost Solution Without Compromise For those who prioritize budget-friendly solutions, the SmartShunt offers the reliability and precision Victron is known for—at an impressively low price. It’s an ideal choice for users who don’t want to invest heavily but still need a trustworthy battery monitor. The SmartShunt provides valuable information such as battery state of charge, voltage, current, and remaining capacity, all crucial data to keep your system running smoothly. Easy to Install and Configure Thanks to its Bluetooth connectivity, installation is straightforward with no additional display wiring. The SmartShunt also features a VE.Direct port for connecting to other Victron devices, ensuring compatibility with a broader Victron Energy system setup. The configuration is simple, and it’s quick to pair with the app, making it accessible for anyone, from first-time users to experienced off-grid enthusiasts. Accurate Monitoring to Maximise Battery Life The SmartShunt’s real-time tracking capabilities allow users to monitor their battery closely, which is essential for maximizing battery life and preventing unexpected power loss. With the data provided by the SmartShunt, you can make informed decisions on power usage and maintenance needs, giving you peace of mind during any adventure or application. Key Features: Bluetooth connectivity for app monitoring Low cost without sacrificing accuracy Compact design that’s easy to install Works with 12V, 24V, and 48V battery systems 300A continuous current rating for high-performance monitoring The Victron Energy SmartShunt 300A SHU050130050 proves that you don’t need a hefty budget for high-quality battery monitoring. This low-cost, efficient solution offers all the essential features needed to keep your battery in optimal condition. Whether you’re heading off the grid or want reliable power management for your vehicle, the SmartShunt is the smart, affordable choice.

...Read more View Product

£59.90

Victron Energy SmartSolar MPPT 75/15 – Solar Charge Controller -SCC075015060R

Victron SmartSolar MPPT 75/15 - SCC075015060R Van Junkies recommend using the Victron SmartSolar MPPT 75/15 with solar panels up to 200w (12v) and 400w (24v) This Victron 75/15 SmartSolar (75V 15A) MPPT solar charge controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent BatteryLife function.Ultrafast MPPT Technology:The Victron 75/15 smartsolar MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high-speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high-intensity LED indicators. Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below). Features of the Victron SmartSolar MPPT 75/15 Inbuilt Bluetooth:This 75/15 SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth-enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle is required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.The Victron 75/15 smartsolar solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Victron 75/15 Smartsolar Datasheet Victron 75/15 Smartsolar Datasheet

...Read more View Product

£208.38

Victron Orion-Tr Smart 12V 18A Isolated DC-DC B2B Split Charge Kit

Victron Orion 12V 18A Smart Isolated DC-DC B2B Split Charge Kit. These Battery to Battery (B2B) charging kits are designed to charge your vehicle's leisure battery whilst driving and are appropriate for vehicles with Smart alternators, usually Euro 5 / Euro 6 compliant alternators. This Kit consists of: Victron Orion Smart 18amp Isolated Battery to Battery Charger (ORI121222120)16mm Heavy Duty Flexible Battery Cable (2m of black as standard and variable red up to 7m depending on installation location)2 x Victron Midi Fuse Holders2 x Victron 60amp Midi Fuses8 x 16mm M8 Battery Lugs Features Fully programmable - Battery charge algorithm (configurable) or fixed output. - Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float - For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected DC to DC (Battery to Battery) Wiring Diagram, Information and Help Datasheet Victron Orion Isolated Datasheet Installation and Help Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here Video

...Read more View Product

£128.99

Victron Energy Digital Multi Control 200/200A GX – DMC000200010R

The Digital Multi Control is used to remotely view and adjust AC input currents, and turn on and off the Multi or Quattro. It is designed to integrate cleanly with your boat, vehicle or house system control panel. The Digital Multi Control panel (DMC) is designed to work with all Multi/Quattro. This includes stand alone, parallel and 2-3 phase configurations. Connecting the DMC to your system is simple, in most cases just connecting the DMC with an RJ45 cable is sufficient and no extra set-up handling is required. Brand Victron Energy Manufacturer Part Number DMC000200010R GTIN 8719076017011 Warranty 5 Years Country of Manufacture India

...Read more View Product

£1,020.00

Victron Energy MultiPlus-II 12V 3000VA 120A 32A – PMP122305010

The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. Features A MultiPlus, plus ESS (Energy Storage System) functionality The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual. PowerControl and PowerAssist – Boosting the capacity of the grid or a generator A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters. Two AC Outputs The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. Virtually unlimited power thanks to parallel and three phase operation (not available for the 8k and 10k models) Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity. On-site system configuring, monitoring and control Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel. Remote configuring and monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. Brand Victron Energy Manufacturer Part Number PMP122305010 GTIN 8719076048916 Voltage 12V Cont. Output Power at 25°C 3000VA Peak Power 5500W Output AC Voltage 230V Transfer Switch 32A Max. AC Input Current 32A Max. Battery Charge Current 120A Protection Category IP22 Efficiency 93% Bluetooth Compatible Yes Dimensions H546 x W275 x D147mm Weight 19Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£106.99

Victron Energy SmartShunt 500A/50mV – SHU050150050

The Victron Smart Shunt is the perfect solution for monitoring and managing your battery system. With its advanced technology and user-friendly design, the Smart Shunt is a reliable and efficient way to ensure that your battery is always performing at its best. The Smart Shunt is designed to accurately measure the current flowing in and out of your battery, and can be easily connected to any battery system. This allows you to monitor the state of your battery in real-time, and make sure that it is always charged and ready to go. In addition to its monitoring capabilities, the Smart Shunt also has a number of advanced features that make it even more useful. For example, it has an integrated Bluetooth module that allows you to connect to your smartphone or tablet, so you can access all of the data and settings from the Smart Shunt on your mobile device. The Smart Shunt also includes a built-in relay that can be used to control other devices, such as a generator or an inverter. This means that you can use the Smart Shunt to automatically start or stop other devices, depending on the state of your battery. Overall, the Victron Smart Shunt is a powerful and versatile tool that can help you better manage your battery system. Whether you're a professional or a hobbyist, the Smart Shunt is the perfect choice for anyone looking to improve the performance and reliability of their battery system. The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted. The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor. If you are looking for different size Victron SmartShunts: Victron Energy SmartShunt 500A/50mV – SHU050150050 Victron 1000A 12V/24V/48V Battery Monitoring Smartshunt With Bluetooth - SHU050210050 Victron 2000A 12V/24V/48V Battery Monitoring Smartshunt With Bluetooth - SHU050220050 Differences compared to BMV712 Battery Monitor No programmable visual and audible alarm. No programmable relay. Datasheet Victron Smartshunt Datasheet Video

...Read more View Product

£213.00

Victron Energy Orion-Tr Smart 12/12-30A (360W) Non-Isolated DC-DC Charger – ORI121236140

The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. PRODUCT CODE: ORI121236140 DC to DC (Battery to Battery) Wiring Diagram, Information and Help DC to DC (Battery to Battery) Wiring Diagram, Information and Help Datasheet Victron Orion Non-Isolated Datasheet Installation and Help Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here Wiring Diagram Video

...Read more View Product

£104.99

Victron Energy SmartSolar MPPT 100/30 – Solar Charge Controller - SCC110030210

Victron Energy SmartSolar MPPT 100/30 – Solar Charge Controller - SCC110030210 This Victron 100V 30A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device.Ultrafast MPPT Technology:This 30A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse current, PV reverse polarity and battery reverse polarity. The internal temperature sensor also protects the battery from overheating and will activate power derating if excessive temperatures are detected. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery, as well as 30 day performance data. The user can also specifically set the duration and voltage of each charging stage. Other features:The Victron SmartSolar MPPT 100/30 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Inbuilt bluetooth- Max solar panel voltage: 100V- Max solar panel power: 440W (12V) / 880W (24V)- Temperature sensor for automatic compensation (-16mV °C resp. -32mV °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 10mA- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 186 x 130 x 70 mm- Mounting dimensions: 175 x 75 mm- Weight: 1.3kg- 4 x mounting holes for ease of installation

...Read more View Product

£179.99

Victron Energy Blue Smart IP22 Charger 12V 30A 1 Output – BPC123047022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC123047002 GTIN 8719076052364 Voltage 12V Charge Current 30A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£69.99

Victron Energy Busbar 250A 6P +Cover - VBB125060020

VBB125060020 - Victron Busbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment. Busbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment. We offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protection cover. Brand Victron Energy Manufacturer Part Number VBB125060020 gtin 8719076056416 Max. Current Rating 250A Max. Voltage Rating 70VDC Dimensions H48 x W237 x D70mm Weight 0.43Kg Warranty 5 Years Country of Manufacture Taiwan Victron Energy Busbar 250A 6P +Cover Datasheet Victron Energy Busbar 250A 6P +Cover Datasheet

...Read more View Product

£8.91

Victron Fuse holder for MIDI-fuse (CIP000050001)

Victron Fuse holder for MIDI-fuses (CIP000050001) WEIGHT 0.025 kg DIMENSIONS 25 × 30 × 52 mm BRAND Victron Energy COLOUR Grey COUNTRY OF ORIGIN China GLOBAL IDENTIFIER (GTIN CODE) 8719076021681 MANUFACTURER Victron Energy QUANTITY PER MASTERBOX 100 QUANTITY PER PALLET 5400 USA STATISTICAL CODE 8538.90.81.80 SKU CIP000050001 SIZE 25 x 30 x 52

...Read more View Product

£157.18

Victron Energy Blue Smart IP22 Charger 12V 20A 1 Output – BPC122042022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space. Brand Victron Energy Manufacturer Part Number BPC122042002 GTIN 8719076037439 Voltage 12V Charge Current 20A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£599.00

Victron Energy MultiPlus 12v Inverter Charger 12/1600/70-16 VE.Bus – PMP122160000

Victron Energy MultiPlus 12v Inverter Charger 12/1600/70-16 VE.Bus – PMP122160000 The new style MultiPlus is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Features Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption Remote Monitoring and Control Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more… Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature. PowerControl – Dealing with limited generator, shore side or grid power With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools Programmable relay By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low). Brand Victron Energy Manufacturer Part Number PMP122160000 Voltage 12 Transfer Switch (A) 16 Cont. Output Power at 25°C (VA) 1600 Peak Power (W) 2800 Max Efficiency 93% Zero Load Power (W) 10 Charge Current House Battery (A) 70 Charge Current Starter Battery (A) 1 (12V and 24V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off On/off Protection Category IP21 Dimensions H470 x W265 x D120mm Weight (kg) 10.2 Warranty 5 Years Country of Manufacture India

...Read more View Product

£125.99

Victron Energy Blue Smart IP22 Charger 12V 15A 1 Output UK – BPC121542022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC121542022 GTIN 8719076041047 Voltage 12V Charge Current 15A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£840.00

Victron Energy MultiPlus 12V 2000VA 80A 32A VE.Bus – PMP122200000

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Brand Victron Energy Manufacturer Part Number PMP122200000 GTIN 8719076052135 Voltage 12V Cont. Output Power at 25°C 2000VA Peak Power 3500W Output AC Voltage 230V Transfer Switch 35A Charge Current House Battery 80A Charge Current Starter Battery 1A Protection Category IP21 Efficiency 93% Bluetooth Compatible No Dimensions H506 x W236 x D147mm Weight 15.5Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

Best Seller

£159.99

Victron 18A 12V Smart Dc To Dc Automatic Multi-Stage Intelligent Battery-To-Battery Charger ORI121222120

Victron 18A 12V Smart Dc To Dc Automatic Multi-Stage Intelligent Battery-To-Battery Charger ORI121222120 The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. PRODUCT CODE: ORI121222120 DC to DC (Battery to Battery) Wiring Diagram, Information and Help Datasheet Victron Orion Isolated Datasheet Installation and Help Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here Video

...Read more View Product

£88.99

Victron Energy SmartSolar MPPT 100/20 – SCC110020160R

Victron Energy SmartSolar MPPT 100/20 – SCC110020160R A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on our website for details Day/night timing and light dimming option See the software section on Victron for details Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. Brand Victron Energy Manufacturer Part Number SCC110020160R GTIN 8719076043027 Voltage 12/24/48V Rated Charge Current 20A Nominal PV Power, 12V 290W Max. PV Short Circuit Current 20A Max. PV Open Circuit Voltage 100V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H100 x W113 x D60mm Weight 0.65Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£275.00

Victron Energy MultiPlus 12v Inverter Charger 12/500/20-16 VE.Bus – PMP121500000

Victron Energy MultiPlus 12v Inverter Charger 12/500/20-16 VE.Bus – PMP121500000 The new style MultiPlus is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Features Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption Remote Monitoring and Control Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more… Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature. PowerControl – Dealing with limited generator, shore side or grid power With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools Programmable relay By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low). Voltage (V) 12 gtin 5060709453083 Brand Victron Energy Manufacturer Part Number PMP121500000 Voltage 12 Warranty 5 Years Country of Manufacture India Peak Power (W) 900 Weight (kg) 4.4 Max Efficiency 90% Programmable Relay Yes Dimensions H311 x W182 x D100mm Battery Temperature Sensor Yes Remote on-off On/off/charger only Protection Category IP21 Three Phase and Parallel Operation Yes Power Control Yes Power Assist No Transfer Switch (A) 16 Cont. Output Power at 25°C (VA) 500 Cont. Output Power at 25°C (W) 430 Cont. Output Power at 40°C (W) 400 Cont. Output Power at 65°C (W) 300 Zero Load Power (W) 6 Zero Load Power in Search Mode (W) 2 Charge Current House Battery (A) 20 Charge Current Starter Battery (A) 1 VE.Bus Communication Port For parallel and three phase operation, remote monitoring and system integration DIP switches Yes Internal DC fuse 125A

...Read more View Product

£210.75

Victron Energy Lynx Distributor – LYN060102000

A modular DC bus bar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Part of the modular Lynx distribution system. Contains a positive and negative bus-bar and provides a connection for 4 individual DC equipment circuits, loads or DC groups. It has a space for individual DC fuses per DC group. There is an optional feature of an LED for each fuse to indicate if fuse is blown. If you wish to use the fuse indication LEDs on the Lynx Distributor, it also requires a connection to a Lynx Shunt. The Lynx Shunt contains the necessary wide input (8 to 70VDC) power supply to output the required 5V (4,5V-5,5V) power requirement of the Lynx Distributor circuit board. RJ11 fly leads are used to connect the Lynx Shunt to the Distributor. This RJ11 cable is supplied with the Distributor in the box. There are two ports on the Lynx Shunt, and it is possible to use either. When all is OK, only the central LED is green; when a fuse has blown (or is missing) the central and blow fuse circuit LEDs turn red. If you are not using all connection points in your DC distribution, it may be necessary to fit dummy fuses to extinguish the red LEDs. A future upgrade is planned to also send info back to the GX device over the VE-can, but is not yet implemented

...Read more View Product

£121.99

Victron BMV-700 Battery Monitor (1 Battery/Bank) - BAM010700000

Victron BMV-700 Battery Monitor (1 Battery/Bank) - BAM010700000 The BMV-700 is Victron's new high precision multi-function battery monitor with a host of useful features. It essentially acts as a battery 'fuel gauge' for anyone needing to keep a check on the performance of their battery or battery bank. The information displayed by the BMV-700 includes voltage, current draw, Ah consumed, % charge level, 'time-to-go' and it features a programmable alarm and in-built relay to trigger external equipment under an alarm condition. The shunt is fitted in-line with the battery's negative cable and the on-board PCB is powered by a fused positive supply. Once the battery monitor is panel-mounted in a suitable location (with or without the supplied square bezel) it is connected to the shunt's PCB using a single RJ12 data/power cable and programmed using the on-board menu. Can be used with the Victron VE.Direct to Bluetooth Smart Dongle Box contents BMV-700 500A/50mV shunt with on-board PCB RJ12 cable - 10m long Fused power cable - 2m long Optional square bezel Fixings Instruction manual Features Displays: Voltage / Current / Power / Ah Consumed / State of Charge (%) / Time-to-go / Total kWh charged/discharged Auto re-calibration each time the battery is fully charged (to ensure accuracy is maintained) Auto-detection of nominal system voltage Programmable visual and audible alarm Programmable relay that can be energised/de-energised in an alarm condition Can be configured for use with other shunts Suitable for a single battery or a bank of batteries. Low current consumption Backlight for display Quick-install menu and detailed setup menu V.E Direct communication port for integration with other Victron equipment Suitable for use with 12V or 24V systems 5-year manufacturer's warranty Input voltage:9.5 - 95 V DC Power consumption: 4mA @ 12V (2.9Ah / month) - without relay or backlight Operating temperature: -20ºC to +50ºC Battery capacity: 20-9999 Ah Relay: 60V, 1A NO (can be inverted to NC) Shunt terminal size: M10 Shunt mounting holes: 5.8mm dia. (101.5mm between centres) Shunt overall dims: 120 (L) x 40 (W) x 50 (H) mm Monitor front dia: 63mm Panel hole cut-out dia: 52-53mm Body depth: 31mm Square bezel dims: 29 x 29 mm

...Read more View Product

£58.99

VICTRON ENERGY BUSBAR 250A 4P + COVER – VBB125040010

VICTRON ENERGY BUSBAR 250A 4P + COVER – VBB125040010 Busbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment. Victron offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protection cover. Available models: 150A / 70V – 4 high current connections 150A / 70V – 6 high current connections 250A / 70V – 4 high current connections 600A / 70V – 4 high current connections and 8 low current connections 600A / 70V – 8 high current connections and 8 low current connections Brand Victron Energy Manufacturer Part Number VBB125040010 GTIN 8719076052210 Maximum Current 250A Maximum Voltage 70VDC Terminal Diameter 8mm Terminal Height 17mm Dimensions H48 x W237 x D70mm Weight 0.45Kg Warranty 5 Years

...Read more View Product

£499.00

Victron Energy MultiPlus 12v Inverter Charger 12/1200/50-16 230V VE.Bus – PMP122120000

Victron Energy MultiPlus 12v Inverter Charger 12/1200/50-16 230V VE.Bus – PMP122120000 The new style MultiPlus is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Features Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption Remote Monitoring and Control Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more… Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature. PowerControl – Dealing with limited generator, shore side or grid power With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools Programmable relay By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low). Brand Victron Energy Manufacturer Part Number PMP122120000 Voltage 12V Transfer Switch (A) 16A Cont. Output Power at 25°C (VA) 1200 Peak Power (W) 2400 Max Efficiency 93% Zero Load Power (W) 10 Charge Current House Battery (A) 50 Charge Current Starter Battery (A) 1A(12V and 24V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off On/off/charger only Protection Category IP21 Dimensions H406 x W250 x D100mm Weight (kg) 8.2 Warranty 5 Years Country of Manufacture China

...Read more View Product

£299.00

Victron Energy Phoenix Inverter 12/1200 230V VE.Direct UK PIN122121410

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. The VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Power lead not included in the box Brand: Victron Energy PIN122121410 Remote on-off: Yes Cont. output power at 25°C (VA): 1200 Peak power (W): 2200 Maximum efficiency (%): 91 Battery-connection: Screw terminals Weight kg: 7.4 Dimensions: H117x 232 x 362mm Input voltage range: 9,2 - 17V Protection: a - f Output Voltage: 230VAC or 120VAC +/- 3% Warranty: 5 Years Zero load consumption: 7W

...Read more View Product

£259.99

Victron Orion XS Buckboost 50A Non-Isolated DC-DC Charger - ORI121217050

Victron Orion Buckboost 50A (700W) Non-Isolated DC-DC Charger ORI121217040 - Now called XS Engineered from the ground up, the Smart BuckBoost redefines adaptive DC-DC charging. For use in dual battery systems charged with an (intelligent) alternator. This device not only ensures top-tier performance but also guarantees the safety of your system. Stay in charge with configurable input and output currents, and rest assured that your Smart BuckBoost will run at full capacity up to 40°C. The innovative aluminium circuit board cooling technology delivers an astonishing 98% efficiency without the need for fans. As an integral part of your Victron system, the Smart BuckBoost offers full (remote) monitoring and control capabilities, giving you complete command of your device and system. Fully configurable Engine shutdown detection Intelligent charge algorithms Efficient cooling Works with VictronConnect Remote monitoring optional Exploring the Advanced Features of the Victron Orion XS Buckboost 50A (700W) Non-Isolated DC-DC Charger ORI121217050The Victron Orion XS Buckboost 50A (700W) Non-Isolated DC-DC Charger, model ORI121217040, represents a significant advancement in the realm of power management and battery charging technology. This article delves into the technical aspects and new features of this innovative product, highlighting its potential impact on various applications.Overview of the Victron Orion XS Buckboost 50AThe Victron Orion XS Buckboost 50A is a high-power, non-isolated DC-DC charger designed to efficiently manage power supply and charging in a range of applications, from marine and automotive to off-grid solar systems. Its primary function is to ensure a stable output voltage from a variable input voltage source, making it ideal for systems where voltage fluctuations are common.Key Features and Technical Specifications1. High Power Output: The charger boasts a substantial power output of 700W, capable of handling significant energy demands.2. Wide Input Voltage Range: It operates efficiently across a broad input voltage range, accommodating fluctuations and ensuring a stable output.3. Advanced Buck-Boost Technology: The charger employs state-of-the-art buck-boost technology, enabling it to either step down (buck) or step up (boost) the input voltage to achieve the desired output voltage.4. Adjustable Output Voltage: Users can adjust the output voltage to suit specific requirements, providing flexibility across different battery types and systems. 5. Non-Isolated Design: The non-isolated nature of this charger allows for a more compact and efficient design, making it suitable for applications where space is at a premium.6. Smart Cooling System: The device includes an intelligent cooling system that adjusts the fan speed based on the load, ensuring optimal performance and longevity.7. Remote Monitoring and Control: Integration with Victron's remote management platforms, such as the VictronConnect app, allows for easy monitoring and adjustments.8. Built-in Safety Features: The charger is equipped with several safety features, including over-temperature protection, short-circuit protection, and reverse polarity protection.Applications and Use CasesThe Victron Orion XS Buckboost 50A is versatile and can be used in various scenarios:- **Marine Applications**: Ideal for boats where stable power is needed for navigation systems, lighting, and other electronics.- **Automotive,RVs, Campers & Motorhomes**: Useful in vehicles and recreational vehicles for managing power between different battery systems.- **Off-Grid Solar Systems**: Enhances solar power setups by ensuring consistent charging and power supply to batteries.- **Industrial Applications**: Can be used in industrial settings where reliable DC power is critical.Installation and SetupThe installation process is straightforward, but it requires a basic understanding of electrical systems. It's crucial to follow the manufacturer's guidelines to ensure safety and optimal performance. The charger should be installed in a location with adequate ventilation to facilitate cooling.ConclusionThe Victron Orion XS Buckboost 50A (700W) Non-Isolated DC-DC Charger ORI121217040 is a robust and versatile solution for managing DC power supply and charging in a variety of settings. Its advanced features, such as adjustable output voltage, smart cooling, and remote monitoring capabilities, make it a top choice for professionals and enthusiasts seeking reliable and efficient power management solutions. As technology continues to evolve, products like the Victron Orion XS Buckboost 50A are setting new standards in the field of power electronics. Victron Orion XS Buckboost 50A Datasheet Victron Orion XS Buckboost 50A Manual

...Read more View Product

£199.99

Victron Cerbo GX MK2 - BPP900450110

Victron Cerbo GX MK2 - BPP900450110 This all-new communication centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through our Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch 50, a MFD or our VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Features Perfect monitoring & control Instantly monitor the battery state of charge, power consumption, power harvest from PV, generator, and mains, or check tank levels and temperature measurements. Easily control the shore power input current limit, (auto)start/stop generator(s) or change any setting to optimise the system. Follow up on alerts, perform diagnostic checks and resolve challenges remotely. The Cerbo GX turns any power challenge into an effortless experience. Maximise your system performance The Cerbo GX maximises the performance of your system's components in real-time and keeps them in perfect tune. With its Dual Core Processor and the addition of an extra CAN-bus port you can now support even bigger systems; closely follow managed (lithium) batteries while the second port can support up to 25 simultaneously connected VE.Can solar chargers. The new NMEA 2000-out support has the GX easily integrated into any boats network. Four tank- and four temperature ports as well as 3 VE.Direct ports, 3 USB ports, 4 digital inputs and 2 relays allow you to expand control to a new level. Maximising systems performance was never this easy. Expand your view The new (optional) GX Touch 50 display allows you to have an instant overview of your system and adjust settings in the blink of an eye. Its super slim 5 inch waterproof design, top-mountable setup and its simple installation bring a lot of flexibility when creating a crisp and clean dashboard. Simple mounting and configuration The Cerbo GX is now optimised to more than meet the standards of installer professionals. The device is easily mountable on a DIN-Rail (with DIN35 adapter small, not included) and its separate touchscreen can now be bolted on top of a dashboard, eliminating the need to create perfect cut-outs (like with the Color Control GX) and is connected through just one cable, taking away the hassle of having to bring many wires to a dashboard. Its new Bluetooth feature enables a quick connection and configuration via our VictronConnect app. Outsmart any power challenge The Cerbo GX serves endless purposes, extending perfect control to the most diverse applications. For solutions including generators, such as Marine, or Backup & Off-grid, it will auto-start/stop your generator, or delays ignition until the end of ‘quiet’ periods. For Energy Storage Systems it keeps backup batteries at 100%, kicks-in during power-cuts and diverts excess (solar) power to self-consumption, saving you money. For RV and Emergency vehicles it keeps vital systems function flawlessly. Datasheet Cerbo GX, Cerbo-S GX and GX Touch Datasheet Manual Cerbo Gx Manual Installation & Help Video

...Read more View Product

£118.99

Victron Monocrystalline panel 185W-12V Mono 1485x668x30mm series 4a SPM041851200

Victron Energy Solar Panel 12V 185W Mono series 4a – SPM041851200 Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. This panel is available as part of our 185w Solar Kit and our 370w Solar Kit Brand Victron Energy Manufacturer Part Number SPM041851200 GTIN 8719076040361 Voltage 12V Nominal Power 185W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Dimensions L1485 x W668 x D30mm Weight 11Kg Warranty 5 Years This panel is available as part of our 175w Solar Kit and our 350w Solar Kit Datasheet BlueSolar Monocrystalline Datasheet Manual BlueSolar 185w Installation Manual

...Read more View Product

£139.99

Victron Energy Phoenix Inverter 12/500 VE.Direct UK – PIN121501400

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. Features VE.Direct communication port The VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Plug Type UK Max Efficiency 90% Continuous Output Power at 25°C 500VA

...Read more View Product

£14.79

Victron VE.Direct Cable 0.3m 0.9m 1.8m 3m 5m 10m

The VE.Direct cable used for communication between Victron VE.Direct devices, it’s also used to connect a Victron battery monitor to the Victron Colour Control. This cable is available in different lengths.

...Read more View Product

£22.49

Victron 60a/80v Mega Fuse - CIP136060010 (5 Pack) New code is CIP138060020 (5 Pack)

Brand Victron Energy Manufacturer Part Number CIP138060020 Warranty 5 Years Appr. Voltage Drop 120 mV Cold Resistance 1.5

...Read more View Product

Out of Stock

£99.99

Victron Monocrystalline panel 115W-12V Mono series 4b SPM041151202 (previously SPM041151200)

Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. This panel is available as part of our 115w Solar Kit and our 230w Solar Kit Brand Victron Energy Manufacturer Part Number SPM041151202 (previously SPM041151200) GTIN 8719076047414 Voltage 12V Nominal Power 115W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Dimensions 1030 x 668 x 30mm Weight 8Kg This panel is available as part of our 115w Solar Kit and our 230w Solar Kit

£55.99

Victron Energy SmartSolar MPPT 75V 10A – 75/10 SCC075010060R

Victron Energy SmartSolar MPPT 75V 10A – 75/10 SCC075010060R A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on our website for details Day/night timing and light dimming option See the software section on Victron for details Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. Brand Victron Energy Manufacturer Part Number SCC075010060R GTIN 8719076040798 Voltage 12/24V Rated Charge Current 10A Nominal PV Power, 12V 145W Max. PV Short Circuit Current 13A Max. PV Open Circuit Voltage 75V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H100 x W113 x D40mm Weight 0.5Kg Warranty 5 Years

...Read more View Product

£193.99

Victron Energy GX Touch 50 – BPP900455050

The GX Touch 50 is the display accessory for the Cerbo GX. The five inch a touch screen display gives an instant overview of your system and allows to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, its super slim waterproof design, top-mountable setup and its simple installation bring a lot of flexibility when creating a crisp and clean dashboard. Simply mounted The GX Touch is optimised to more than meet the standards of installer professionals. The screen is simply bolted on top of a dashboard, eliminating the need to create perfect cut-outs (like with the ColorControl GX) and is connected through just one cable, taking away the hassle of having to bring many wires to a dashboard. The GX Touch 50 is a companion to the Cerbo GX, the all-new communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through our Victron Remote Management (VRM) portal, or access directly, using the GX Touch 50, a MFD or our VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way Brand Victron Energy Manufacturer Part Number BPP900455050 GTIN 8719076048770 Dimensions H78 x W154 x D48mm Warranty 5 Years Country of Manufacture Malaysia Datasheet Cerbo GX, Cerbo-S GX and GX Touch Datasheet Manual Cerbo Gx and Touch Manual Installation & Help Video

...Read more View Product

£57.00

Victron Energy BlueSolar MPPT 75/15 – SCC010015050R

Victron Energy BlueSolar MPPT 75/15 – SCC010015050R This Victron 75V 15A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery), battery state of charge, load status and consumption.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 75-15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries (requires Bluetooth dongle or USB interface cable to adjust battery type).

...Read more View Product

£25.99

Victron Energy Phoenix Inverter Control VE.Direct - REC040010210R

Remote On/Off switch panel for Victron's range of Phoenix VE.Direct inverters and newer Phoenix Smart inverters. A blue LED serves as a visual indicator that the inverter is powered. Supplied with a metal bracket and screws for a discrete, flush-mounted installation and no visible fixings. Installation is simple, requiring just a 2-core connection between the remote panel and the inverter remote control terminals. Features On/Off rocker switch Blue LED to indicate inverter is ON 5-year manufacturer's warranty

...Read more View Product

£164.99

Victron Energy SmartSolar MPPT 100/50 – Solar Charge Controller SCC110050210

Victron Energy SmartSolar MPPT 100/50 – Solar Charge Controller SCC110050210 50A MPPT with max VOC 100V, 12 or 24 Volt battery A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. MPPT: Ultra Fast Maximum Power Point TrackingBy constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remote Monitoring and ControlRemotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

...Read more View Product

£4.99

Victron 60a/80v Mega Fuse - CIP136060010 single fuse New Code is CIP138060020 single fuse

Brand Victron Energy Manufacturer Part Number CIP138060020 Warranty 5 Years Appr. Voltage Drop 120 mV Cold Resistance 1.5

...Read more View Product

£146.15

Victron Energy Blue Smart IP22 Charger 12V 15A 3 Outputs - BPC121544022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC121544002 GTIN 8719076037422 Voltage 12V Charge Current 15A Input Voltage 230V Number of Outputs 3 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£699.00

Victron Energy Phoenix Inverter 12V 3000VA Smart – PIN122300000

The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems. It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave. Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish. Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect. Features Bluetooth built-in: fully configurable with a tablet or smartphone Low battery voltage alarm Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Alarm relay Monitoring: In- and output voltage, load and alarms VE.Direct communication port The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters. Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch. Brand Victron Energy Manufacturer Part Number PIN122300000 GTIN 8719076047360 Voltage 12V Cont. Output Power at 25°C 3000VA Peak Power 6000W Output AC Voltage 230V Protection Category IP21 Efficiency 93% Bluetooth Enabled Yes Dimensions H533 x W285 x D150mm Weight 19Kg Warranty 5 Years Country of Manufacture China

...Read more View Product

£499.00

Victron Energy Phoenix Inverter 12V 2000VA Smart – PIN122201000

The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems. It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave. Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish. Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect. Features Bluetooth built-in: fully configurable with a tablet or smartphone Low battery voltage alarm Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Alarm relay Monitoring: In- and output voltage, load and alarms VE.Direct communication port The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters. Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch. Brand Victron Energy Manufacturer Part Number PIN122201000 was PIN122200000 GTIN 8719076042655 Voltage 12V Cont. Output Power at 25°C 2000VA Peak Power 4000W Output AC Voltage 230V Protection Category IP21 Efficiency 92% Bluetooth Enabled Yes Dimensions H485 x W219 x D125mm Weight 13Kg Warranty 5 Years Country of Manufacture China

...Read more View Product

£247.99

Orion-Tr Smart 12/12V-30A Isolated DC-DC Charger ORI121236120

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. PRODUCT CODE: ORI121236120 Datasheet Victron Orion Isolated Datasheet Installation and Help Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here Video

...Read more View Product

£40.01

Victron Energy VE.Direct Bluetooth Smart Dongle – ASS030536011

Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. View information wirelessly such as battery status and solar panel power, plus other useful data. The dongle is able to read data from all products with a VE.Direct port, such as the BMV-70x series battery monitors, Phoenix Inverters with VE.Direct port, MPPT Solar Charge Controllers. With the VE.Direct to Bluetooth Smart dongle you can get live status info, see historical values as well as configure Victron products.The dongle works together with the VictronConnect App, available for both Android and iOS devices. Brand Victron Energy Manufacturer Part Number ASS030536011 Weight (kg) 0.27 Warranty 5 Years Country of Manufacture India

...Read more View Product

£16.75

Victron Energy GX Touch 50 Wall Mount – BPP900465050

The GX Touch wall mount accessory allows easy mounting of the GX Touch 50 on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount onto the wall. Brand Victron Energy Manufacturer Part Number BPP900465050 GTIN 8719076054078 Dimensions L128.1 x W87 x D24.4mm Warranty 5 Years

...Read more View Product

Out of Stock

£143.50

Victron Polycrystalline panel 175W-12V Poly 1485x668x30mm series 4a SPP041751200

Victron Energy Solar Panel 12V 175W Poly series 4a – SPP041751200 Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Brand Victron Energy Manufacturer Part Number SPP041751200 GTIN 8719076040545 Voltage 12V Nominal Power 175W Cell Type Polycrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Dimensions L1485 x W668 x D30mm Weight 12Kg Warranty 5 Years

£155.99

Victron BMV-712 'Smart' Battery Monitor - Bluetooth Built-In (2 Batteries/Banks) - BAM030712000

Victron BMV-712 'Smart' Battery Monitor - Bluetooth Built-In (2 Batteries/Banks) - BAM030712000 The BMV-712 'Smart' is Victron's high precision multi-function battery monitor with built-in Bluetooth. It essentially acts as a battery 'fuel gauge' for anyone needing to keep a check on the performance of their battery or battery bank and can monitor the voltage of a 2nd battery. The information displayed by the BMV-712 includes voltage, current draw, Ah consumed, % charge level, 'time-to-go' and it features a programmable alarm and in-built relay to trigger external equipment under an alarm condition (note: information displayed for 2nd battery is voltage only). The shunt is fitted in-line with the leisure/house battery's negative cable, the starter/auxiliary battery's negative cable is connected to the shunt's output and fused +ve supplies are taken from each battery into the shunt's 2 inputs. Once the battery monitor is panel-mounted in a suitable location (with or without the supplied square bezel) it is connected to the shunt's PCB using a single RJ12 data/power cable and programmed using the on-board menu. Built-in Bluetooth allows you to display many of the monitor' features via any Android or Apple device or laptop and most settings of the monitor can be configured with the VictronConnect app As an alternative to monitoring the voltage of a 2nd battery the BMV-712 shunt's 2nd/auxiliary input can be used for the following: Temperature monitoring of a single battery/bank using an optional temperature sensor. Battery capacity reduces as temperature increases so the sensor measurement can be fed into the monitor to adjust displayed capacity based on temperature. Mid-point voltage monitoring of one bank of batteries connected in series (or banks of series-connected batteries joined in parallel). This allows detection of a bad cell or a bad battery which can potentially destroy the other connected batteries by over-charging. The voltages either side of the mid-point are compared and the deviation displayed in % and V, with a programmable alarm providing a warning that the deviation is too great. Box contents BMV-712 500A/50mV shunt with on-board PCB RJ12 cable - 10m long 2x fused power cable - 2m long Optional square bezel Fixings Instruction manual Features Displays: Voltage / Current / Power / Ah Consumed / State of Charge (%) / Time-to-go / Total kWh charged/discharged Auto re-calibration each time the battery is fully charged (to ensure accuracy is maintained) Auto-detection of nominal system voltage Programmable visual and audible alarm Programmable relay that can be energised/de-energised in an alarm condition Can be configured for use with other shunts Suitable for 2 batteries or banks of batteries. Low current consumption Backlight for display Quick-install menu and detailed setup menu Temperature monitoring option for 1 battery or bank Mid-point voltage monitoring option for 1 battery or bank V.E Direct communication port for integration with other Victron equipment Suitable for use with 12V or 24V systems 5-year manufacturer's warranty Input voltage: 6.5 - 70 V DC Power consumption: 1mA @ 12V (0.7Ah / month) - without relay or backlight Operating temperature: -40ºC to +50ºC Battery capacity: 1-9999 Ah Relay: 60V, 1A NO (can be inverted to NC) Shunt terminal size: M10 Shunt mounting holes: 5.8mm dia. (101.5mm between centres) Shunt overall dims: 120 (L) x 40 (W) x 50 (H) mm Monitor front dia: 63mm Panel hole cut-out dia: 52-53mm Body depth: 31mm Square bezel dims: 29 x 29 mm

...Read more View Product

£149.00

Victron Energy BlueSolar MPPT 100/50 – SCC020050200

Victron Energy BlueSolar MPPT 100/50 – SCC020050200 This Victron 100V 50A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 50A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 100-50 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12/24V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Max solar panel voltage: 100V- Max solar panel power: 700W (12V) / 1400W (24V)- Temperature sensor for automatic compensation (-16mV / °C resp. -32mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 30mA (12V) / 20mA (24V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 130 x 186 x 70 mm- Mounting dimensions: 176 x 71.5 mm- Weight: 1.3kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£59.99

Victron SmartShunt 300A IP65 Battery Monitor- SHU065130050

The SmartShunt IP65 300A is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted. The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor. Differences compared to BMV-712 Battery Monitor – No programmable visual and audible alarm – No programmable relay Why should I monitor my battery with the SmartShunt IP65 300A? Batteries are used in a wide variety of applications, mostly to store energy for later use. But how much energy is stored in the battery? No one can tell by just looking at it. The service life of batteries depends on many factors. Battery life may be shortened by under-charging, over-charging, excessively deep discharges, excessive charge or discharge currents, and by high ambient temperature. Monitoring the battery with a battery monitor will give important feedback to the user so that remedial measures can be taken when necessary. Doing this will extend battery life and the battery monitor will quickly pay for itself. Key Features Product Code: SHU065130050 Monitor battery voltage, current, state of charge, and time remaining Track historical data: deepest discharge, average discharge, charge cycles Waterproof and robust IP65-rated enclosure suitable for all environments Connect via Bluetooth with the VictronConnect app for easy monitoring on your smartphone or tablet Optional VE.Direct to USB interface for USB connectivity Compatible with GX devices for both local and remote monitoring via VRM portal Auxiliary input for second battery or midpoint voltage monitoring Seamless integration with Victron solar chargers and select AC chargers via VE.Smart networking No visual or audible alarm; notifications via VictronConnect app or GX device Versions Available: 300 A, 500 A, 1000 A, 2000 A

...Read more View Product

£72.00

Victron Energy VE.Bus Smart Dongle – ASS030537010

The VE.Bus Smart dongle is two products in one: First of all it is the bluetooth accessory for our range of inverter/chargers: Multis, MultiPlusses, MultiPlus-II, MultiGrid, MultiGrid-II, Quattros, and our series of Phoenix Inverters with a VE.Bus port. When installed, use the VictronConnect app to monitor operation and also operate the system: change the input current limit as well as switch between Off, On and Charger-only modes. Secondly it can work as a Voltage- and Temperature-sense device for the inverter/charger. This works with all models, and is especially useful in combination with the MultiPlus-II, as it does not have on-board terminals for Voltage- and Temperature sense wiring For monitoring, the device is a great alternative in caravans, smaller yachts and motor homes for which the Color Control GX or Venus GX are a step too far.

...Read more View Product

£108.99

Victron Energy BlueSolar MPPT 100/30 – SCC020030200

Victron Energy BlueSolar MPPT 100/30 – SCC020030200 This Victron 100V 30A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 30A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 100-30 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12/24V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Max solar panel voltage: 100V- Max solar panel power: 440W (12V) / 880W (24V)- Temperature sensor for automatic compensation (-16mV / °C resp. -32mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 30mA (12V) / 20mA (24V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 130 x 186 x 70 mm- Mounting dimensions: 176 x 71.5 mm- Weight: 1.3kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£16.53

Victron Energy MEGA-fuse 300A/32V (5 pack) – CIP136300010 New Code CIP138300020

Victron Energy MEGA-fuse 300A/32V (5 pack) – CIP136300010 Brand Victron Energy Manufacturer Part Number CIP136300010 Warranty 5 Years Appr. Voltage Drop 80 mV Cold Resistance 0.17

...Read more View Product

£360.00

Victron Energy MultiPlus 12v Inverter Charger 12/800/35-16 VE.Bus – PMP121800000

Victron Energy MultiPlus 12v Inverter Charger 12/800/35-16 VE.Bus – PMP121800000 The new style MultiPlus is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Features Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption Remote Monitoring and Control Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more… Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature. PowerControl – Dealing with limited generator, shore side or grid power With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools Programmable relay By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low). Brand Victron Energy Manufacturer Part Number PMP121800000 Voltage 12 Transfer Switch (A) 16 Cont. Output Power at 25°C (VA) 800 Peak Power (W) 1600 Max Efficiency 92% Zero Load Power (W) 7 Charge Current House Battery (A) 35 Charge Current Starter Battery (A) 1 (12V and 24V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Yes Protection Category IP21 Dimensions H360 x W240 x D100mm Weight (kg) 6.4 Warranty 5 Years Country of Manufacture India

...Read more View Product

£57.01

Victron Energy Blue Smart IP65 Charger 6V/12V 1.1A UK – BPC120134024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC120134024R GTIN 8719076055532 Voltage 6/12V Charge Current 1.1A Input Voltage 230V Protection Category IP65 Efficiency 82% Bluetooth Enabled Yes Plug Type UK Dimensions H38 x W64 x D153mm Weight 0.4Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£119.99

Victron Energy Blue Smart IP67 Charger 12V 13A 1 Output – BPC121347026

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC121347026 GTIN 8719076055273 Voltage 12V Charge Current 13A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H85 x W211 x xD60mm Weight 1.8Kg Warranty 5 Years

...Read more View Product

£112.99

Victron 130W Bluesolar Panel Mono Dimensions 1200 x 668

Victron Bluesolar Panel Mono 130W Dimensions 1200 x 668 x 30mm Low voltage-temperature coefficient enhances high-temperature operation Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Rated Power: 130W Rated Voltage: 12V Impp: 6.98A Dimensions: 1200 x 668 x 30mm Weight: 8kg

...Read more View Product

£182.49

Victron Energy Blue Smart IP22 Charger 12V 30A 3 Outputs – BPC123048022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC123048002 GTIN 8719076052401 Voltage 12V Charge Current 30A Input Voltage 230V Number of Outputs 3 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type Uk Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

Out of Stock

£105.99

Victron Energy Solar Panel 12V 140W Mono Series 4a - SPM041401200

Victron Energy Solar Panel 140W 12V Mono 1250x668x30mm series 4a - SPM041401200 Exceptional Quality Solar Panel from Victron Energy, These panels are ideal for use on a number of applications, including campervans, Marine and Leisure vehicles. these work at their optimum level of performance when coupled with a Victron MPPT Solar Charge Controller. Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. This panel is available as part of our 140w Solar Kit and our 280w Solar Kit Brand Victron Energy Manufacturer Part Number SPM041401200 GTIN 8719076055808 Voltage 12V Nominal Power 140W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Dimensions L1250 x W668 x D30mm Weight 9Kg This panel is available as part of our 140w Solar Kit and our 280w Solar Kit

£199.00

Victron Energy Phoenix Inverter 12V 800VA VE.Direct UK – PIN121801400

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. Features VE.Direct communication port The VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number PIN121801400 GTIN 8719076038405 Voltage 12V Cont. Output Power at 25°C 800VA Peak Power 1500W Output AC Voltage 230V Protection Category IP21 Efficiency 90% Bluetooth Enabled No Plug Type UK Dimensions H105 x W216 x D305mm Weight 5.5Kg Warranty 5 Years

...Read more View Product

£465.00

Victron Energy Phoenix Inverter 12V 1600VA Smart – PIN122161000

Previous part number - PIN122160000 The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems. It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave. Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish. Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect. Features Bluetooth built-in: fully configurable with a tablet or smartphone Low battery voltage alarm Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Alarm relay Monitoring: In- and output voltage, load and alarms VE.Direct communication port The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters. Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch. Brand Victron Energy Manufacturer Part Number PIN122160000 GTIN 8719076042686 Voltage 12V Cont. Output Power at 25°C 1600VA Peak Power 3000W Output AC Voltage 230V Protection Category IP21 Efficiency 92% Bluetooth Enabled Yes Dimensions H485 x W219 x D125mm Weight 12Kg Warranty 5 Years

...Read more View Product

£609.99

Victron Cerbo & Colour Touch Screen Monitoring Bundle

Upgrade your energy management with the Victron Cerbo & Colour Touch Screen Monitoring Bundle—an all-in-one kit designed for seamless, real-time monitoring and control of your off-grid, marine, or backup power system. This comprehensive kit includes the Victron Cerbo, Colour Touch Screen 50, Wall Mount SmartShunt 500A, three 5m VE.Direct cables, and a 5m RJ45 cable, providing everything you need for a fully integrated, user-friendly power monitoring solution. This bundle brings together Victron’s most advanced monitoring hardware and essential accessories, allowing you to track, control, and optimise your entire electrical system from a single, intuitive interface. Perfect for campervans, motorhomes, boats, and off-grid homes, the kit ensures you have complete visibility and control over your solar, battery, and inverter setup at all times. Kit Components and Their Roles Victron Cerbo GXThe Cerbo GX is the communication and control hub of your energy system. It integrates with inverters, batteries, solar charge controllers, and other system components to provide live data and remote management capabilities. With multiple input and output connections—including VE.Direct, VE.Bus, CAN-bus, and USB—the Cerbo GX enables you to monitor battery state of charge, power consumption, solar generation, and more. It also allows for remote access and control via the Victron Remote Management (VRM) portal, so you can manage your system from anywhere in the world. Colour Touch Screen 50 (GX Touch 50)The GX Touch 50 is a sleek, waterproof 5-inch touchscreen display that connects directly to the Cerbo GX. It provides a clear, real-time overview of your entire system and allows you to adjust settings instantly. Its modern, slim design and simple installation make it easy to create a clean, professional dashboard for your power setup. Wall Mount SmartShunt 500AThe SmartShunt 500A is a high-precision battery monitor that measures current, voltage, and battery state of charge. It communicates with the Cerbo GX via VE.Direct, delivering accurate battery data for optimal system management. The SmartShunt also features Bluetooth and can monitor a second battery, midpoint, or temperature sensor, making it a versatile addition for detailed energy tracking. 3 x 5m VE.Direct CablesThese cables provide reliable, high-quality data connections between the Cerbo GX, SmartShunt, and other compatible Victron devices. VE.Direct cables ensure seamless communication and data transfer, allowing your system components to work together efficiently. 1 x 5m RJ45 CableThe RJ45 cable is used to connect VE.Bus or VE.Can devices—such as inverters or other GX components—to the Cerbo GX. This cable ensures stable, high-speed communication for system integration and control. How the Kit Fits Together The Cerbo GX acts as the central brain, gathering data from all connected devices. The GX Touch 50 provides an intuitive, real-time interface for local monitoring and control. The SmartShunt 500A supplies precise battery data, which the Cerbo GX processes and displays. VE.Direct cables link the SmartShunt and other compatible devices to the Cerbo GX, ensuring seamless data flow. The RJ45 cable connects additional Victron devices (such as inverters or solar chargers) to the Cerbo GX for full system integration. Together, these components create a powerful, user-friendly monitoring system that maximises efficiency, enhances reliability, and puts total control of your energy system at your fingertips.

...Read more View Product

£12.31

Victron Energy Midi Fuse 60A/32V (5 PACK) – CIP132060010

Victron MIDI-fuse 60A/32V (package of 5 pcs) (CIP132060010) What are Midi-Fuses? Victron MIDI-fuse 60A/32V (package of 5 pcs) and Midi-Fuses are bolt down fuses that can protect high currents in circuits up to 200amps. The Midi Fuse offers a space saving option over other fuses like a mega fuse especially if you are running smaller cables. What are Midi-Fuses used for? Fuses are used in any run of cable as a protection to ensure the cable does not catch fire in the event of a ‘short’ to ground. You should always correctly size fuse to protect the cable they are installed on. Where do I install the Victron MIDI-fuse 60A/32V? The best place to install a Midi fuse is in each positive length of cable in the system, this also means that problem solving faults and shorts is much easier as you are able to pin point the problem to a single stretch of cable that the fuse is blown on. How should I specify a Midi-fuse? With each Midi-Fuse is rated by the ‘Continuous Current Rating’ and this is printed on each fuse. The continuous current rating is the maximum amount of current that can be past through the fuse continuously at a specific temperature and voltage. When you specify a fuse for your system you should consider your load to be around 75% to 80% of the rated Midi-fuse. When you specify a midi-fuse in any build that you are working on it is important that the fuse is the weakest part of the system to ensure that it will blow first. Why should you use Victron MIDI-fuse 60A/32V over aftermarket low cost versions? Victron Energy are a Global company and they spend lots of time and money researching testing the products before they are sold, Victron products are made from higher spec materials and are all covered by the Victron 5 year warranty for manufacturing defaults. Always use the genuine Victron MIDI-fuse 60A/32V in your systems. Why are Fuse’s better than Circuit breakers? Circuit breakers provide overload protection in the same way as a fuse but have the benefit of being able to reset the system. The way a circuit breaker works is to break the circuit continuity they typically work thermally when the excess heat generated by an overload triggers contactor’s to open and break the circuit. Whilst breakers are very good in a number of ways like they can be reset and used to isolate parts of a system a good quality Victron Midi-fuse installed correctly in a system will always be more reliable than a breaker that has moving parts.

...Read more View Product

£201.99

Orion-Tr Smart 24/12V-30A Non-Isolated DC-DC Charger ORI241236140

Orion-Tr Smart 24/12V-30A Non-Isolated DC-DC Charger ORI241236140 The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. PRODUCT CODE: ORI241236140 DC to DC (Battery to Battery) Wiring Diagram, Information and Help Datasheet Victron Orion Non-Isolated Datasheet Installation and Help Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here Wiring Diagram Video

...Read more View Product

£3.99

Victron Energy MEGA-fuse 300A/32V – CIP136300010 - Single Fuse New Code - CIP138300020

Victron Energy MEGA-fuse 300A/32V – CIP136300010 - Single Fuse

...Read more View Product

£101.00

Victron Energy Galvanic Isolator VDI-16 – GDI000016000

The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc. The isolator is installed directly behind your boat’s 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit.

...Read more View Product

£61.74

Victron Smart Battery protect 65A 12V/24V Battery Over Discharge Protector BPR065022000 (Bluetooth)

This Victron 65A 12/24V automatic smart battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances. Features: Low voltage disconnect: when battery charge is low, the Smart BatteryProtect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health. Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs. Overvoltage disconnect: when battery voltage gets too high, the Smart Battery Protect disconnects the loads to protect them from damage. Bluetooth connectivity: connect your smartphone for easy programming of the voltage settings. Automatic system recognition: the Smart BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup. Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect. Remote switch and alarm connections: connect input and output relays to control the Smart BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems. Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging. System Specifications: Nominal battery voltage: 12V / 24V Operating voltage range: 6 - 35V Maximum continuous current: 65A Peak current (30 seconds): 250A Current draw: <1.5mA active, <0.6mA during disconnect Alarm Relay: 50mA Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C) Dimensions: Dimensions: 40 x 48 x 106 mm Weight: 200g Battery Protect Advantages Automatic smart battery protectors offer protection for the discharging of your battery system, preserving your battery health and protecting appliances. Victron Energy offers a range of discharge protectors which are designed to protect a battery bank from over-discharge and extend its lifespan. The discharge protectors offer several advantages and functionality including: -Protecting the battery bank: The discharge protectors protect the battery bank from over-discharge by disconnecting the load when the battery's state of charge (SOC) reaches a certain level. This helps to extend the lifespan of the battery bank by preventing deep discharge cycles. Customizable settings : The discharge protectors have customizable settings, this allows you to set the SOC level at which the load will be disconnected, and also set the reconnection level, depending on your needs and the type of battery you are using. -Advanced monitoring and control: The discharge protectors can be connected to a network for remote monitoring and control, this allows you to monitor the status of the battery bank and adjust settings as needed. -Compatible with other victron energy product: The discharge protectors can work seamlessly with other Victron Energy products such as the Multiplus inverter/charger, and GX devices for advanced monitoring and control. -Easy installation : The discharge protectors are easy to install and they are compatible with different types of battery, you can use them with lead-acid, lithium-ion, and other types of battery. -Reliability: The discharge protectors are built with high-quality and durable components, which ensures reliable and long-lasting performance. Overall, Victron Energy discharge protectors are a useful addition to a battery bank and can help to extend its lifespan by preventing over-discharge. They are easy to install and customizable settings, compatible with different types of batteries, and allow advanced monitoring and control, which makes them suitable for a wide range of applications.

...Read more View Product

£164.99

Victron Energy SmartSolar MPPT 150/35 – Solar Charge Controller - SCC115035210

Victron Energy SmartSolar MPPT 150/35 – Solar Charge Controller - SCC115035210 This Victron 150V 35A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. SmartSolar MPPT controllers uniquely feature built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device.Ultrafast MPPT Technology:This 35A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, reverse polarity, overvoltage, overcurrent and reverse current, as well as battery overvoltage, reverse polarity and overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional control panel:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage. Other features:The Victron SmartSolar MPPT 150-35 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36* / 48V selection- 2 pairs of terminals (solar panel, battery) for wires up to 16mm2- Inbuilt bluetooth- Max solar panel voltage: 150V- Max solar panel power: 500W (12V) / 1000W (24V) / 1500W (36V) / 2000W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -68mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 20mA (12V) / 15mA (24V) / 10mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 130 x 186 x 70 mm- Weight: 1.25kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£26.87

Victron Energy 6-Way Mega Fuse Holder With Busbar - CIP050060000

Victron Energy 6-way mega fuse holder with integrated busbar and clear polycarbonate cover. This holder saves on cabling by enabling you to make a single connection to the battery and distribute power to several fuse-protected circuits. This is the ideal solution as the primary distribution & fusing point point for higher power circuits leading directly from your battery in campervans, motorhomes, boats and off-grid applications. The busbar has a maximum current rating of 250A and a maximum voltage rating of 70V DC. Five of the fuse locations are connected via a tin-plated copper busbar and one fuse location is 'straight-through'. Fuse and cable connections are made via 12 x M8 galvanised steel bolts, lock washers and hex nuts. The black ABS body incorporates 4 x 6mm diameter mounting holes to fix the holder securely to a flat surface (fixings not included). Max current: 250A Max. voltage: 70V DC Terminal size: M8 Terminal height: 14mm Terminal material: Galvanised steel Hex nut material: Galvanised steel Recommended torque: 60 lbf-inch / 7Nm Busbar material: Tin-plated copper Base material: ABS Cover material: Clear polycarbonate Weight: 0.45kg Overall dimensions: 50.9 (H) x 181.5 (L) x 88 (W) mm

...Read more View Product

£45.95

Cyrix-ct 12/24V-120A Intelligent Battery Combiner

Efficient Power Management with Victron Cyrix-ct 12/24V-120A Intelligent Battery Combiner Maximize your energy solutions with the Victron Cyrix-ct 12/24V-120A Intelligent Battery Combiner, a state-of-the-art device designed for seamless battery management. Ideal for marine, RV, and off-grid applications, this robust battery combiner ensures optimal performance and reliability. Key Features: Intelligent Voltage Sensing: Automatically detects voltage levels, ensuring efficient charging and discharging between multiple battery banks. High Current Capacity: With a 120A continuous current rating, it effortlessly handles the demands of most electrical systems. Dual Voltage Compatibility: Perfectly suited for both 12V and 24V systems, making it a versatile choice for various setups. Priority Charging Feature: Prioritizes the charging of your main battery, ensuring critical operations are always powered. Bi-directional Charging: Allows for charging in both directions, enhancing the flexibility and efficiency of your power system. Overload Protection: Integrated protection mechanisms safeguard against overcurrent and short circuits, ensuring longevity and safety. Compact and Durable Design: Engineered for the toughest conditions, it's compact enough to fit in tight spaces and durable enough to withstand harsh environments. Benefits: Enhanced Battery Life: By intelligently managing the charge, it extends the life of your batteries. Energy Efficiency: Reduces energy waste, ensuring you get the most out of your power sources. Easy Installation: Simple setup process makes it accessible even for those with basic technical knowledge. Versatility: Ideal for a wide range of applications, from boats and RVs to renewable energy systems. Why Choose Victron Cyrix-ct 12/24V-120A? The Victron Cyrix-ct is more than just a battery combiner; it's a smart investment in your energy system. Its intelligent features and robust design make it a top choice for professionals and enthusiasts alike who demand reliability and efficiency. Whether you're sailing the seas, exploring the open road, or harnessing renewable energy, the Victron Cyrix-ct is your trusted partner in power management. Cyrix Battery Combiners: A Closer Look Cyrix Battery Combiners are a revolutionary solution in the realm of battery management. These devices are designed to maximize the efficiency and reliability of your battery systems, making them an ideal choice for a variety of applications. Understanding the Technology At the heart of Cyrix Battery Combiners is a microprocessor-controlled heavy-duty relay. This advanced technology ensures minimal voltage loss, a common issue with traditional diode isolators. By optimizing battery charging and discharging, Cyrix Battery Combiners maintain the health and longevity of your batteries. Functionality and Benefits One of the key functionalities of Cyrix Battery Combiners is their ability to automatically connect batteries in parallel during charging and disconnect them when the voltage drops below a certain level. This feature not only enhances the efficiency of your battery system but also its reliability. Diverse Applications Whether you're dealing with automotive, marine, off-grid, backup, or island systems, Cyrix Battery Combiners are up to the task. Their compatibility with various alternators and battery chargers makes them a versatile component in any power management setup. Easy Installation and Maintenance Installing and maintaining your Cyrix Battery Combiner is straightforward. The step-by-step guide ensures a hassle-free setup, and the tips provided help in maintaining optimal performance. In case of any issues, the troubleshooting section offers practical solutions. Conclusion In conclusion, Cyrix Battery Combiners are an essential component for anyone looking to enhance the efficiency and reliability of their battery systems. With their advanced technology and wide range of applications, they are a smart investment for both short-term performance and long-term battery health. Cyrix-ct Datasheet Cyrix-ct 12/24V-120A Intelligent Battery Combiner Datasheet Cyrix Wiring Diagram

...Read more View Product

£82.00

Victron Energy BlueSolar MPPT 100/20 – SCC110020170R

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on Victron for details Day/night timing and light dimming option See the software section on Victron for details Programming, real-time data and history display options – Color Control GX or other GX devices: see the Venus documents on our website. – A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC110020170R GTIN 8719076049845 Voltage 12/24/48V Rated Charge Current 20A Nominal PV Power, 12V 290W Max. PV Short Circuit Current 20A Max. PV Open Circuit Voltage 100V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H100 x W113 x D60mm Weight 0.65Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£101.36

Victron Energy Blue Smart IP67 Charger 24V 5A 1 Output – BPC240531064R

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC240513006 GTIN 8719076035947 Voltage 24V Charge Current 5A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 94% Bluetooth Enabled Yes Plug Type CEE 7/7 Dimensions H85 x W211 x D60mm Weight 1.8Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£37.54

Victron Monocrystalline panel 30W-12V Mono 560x350x25mm series 4a SPM040301200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£79.99

Victron Energy Phoenix Inverter 12/250 230V VE.Direct UK – PIN121251400

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. Features VE.Direct communication port The VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number PIN121251400 gtin 8719076055006 Voltage 12V Cont. Output Power at 25°C 250VA Peak Power 400W Output AC Voltage 230V Efficiency 87% Protection Category IP21 Dimensions H86 x W165 x D260mm Weight 2.4Kg Warranty 5 Years Bluetooth Enabled No Plug Type UK Plug Type UK Max Efficiency 90% Continuous Output Power at 25°C 250va

...Read more View Product

£44.99

Victron Energy BlueSolar MPPT 75/10 – SCC010010050R

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on Victron for details. Day/night timing and light dimming option See the software section on Victron for details. Programming, real-time data and history display options – Color Control GX or other GX devices: see the Venus documents on our website. – A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC010010050R GTIN 8719076025306 Voltage 12/24V Rated Charge Current 10A Nominal PV Power, 12V 145W Max. PV Short Circuit Current 13A Max. PV Open Circuit Voltage 75V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H100 x W113 x D40mm Weight 0.5Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£166.99

Victron Energy Blue Smart IP22 Charger 12V 20A 3 Outputs – BPC122043022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC122044002 GTIN 8719076037446 Voltage 12V Charge Current 20A Input Voltage 230V Number of Outputs 3 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£63.22

Victron Monocrystalline panel 55W-12V Mono 545x668x25mm series 4a SPM040551200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£367.99

Victron Energy SmartSolar MPPT 250V 60A Tr – 250/60 SCC125060221

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Remote Monitoring and Control Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. Synchronized parallel charging with Bluetooth Up to 10 units can be synchronized with Bluetooth. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. Brand Victron Energy Manufacturer Part Number SCC125060221 GTIN 8719076050841 Voltage 12/24/48V Rated Charge Current 60A Nominal PV Power, 12V 860W Max. PV Short Circuit Current 35A Max. PV Open Circuit Voltage 250V absolute maximum coldest conditions 245V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled Yes Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture Malaysia

...Read more View Product

£209.99

Victron Energy SmartSolar MPPT 150V 45A – 150/45 SCC115045212

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultrafast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F). Flexible charge algorithm Fully programmable charge algorithm (see the software page on Victron), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection – Over-temperature protection and power derating when temperature is high. – PV short circuit and PV reverse polarity protection. – PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function Brand Victron Energy Manufacturer Part Number SCC115045212 GTIN 8719076053026 Voltage 12/24/48V Rated Charge Current 45A Nominal PV Power, 12V 650W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H130 x W186 x D70mm Weight 1.25Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£835.00

Victron Energy MultiPlus-II 48V 5000VA 70A 50A – PMP482505010

The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. Features A MultiPlus, plus ESS (Energy Storage System) functionality The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual. PowerControl and PowerAssist – Boosting the capacity of the grid or a generator A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters. Two AC Outputs The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. Virtually unlimited power thanks to parallel and three phase operation (not available for the 8k and 10k models) Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity. On-site system configuring, monitoring and control Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel. Remote configuring and monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. Brand Victron Energy Manufacturer Part Number PMP482505010 GTIN 8719076047599 Voltage 48V Cont. Output Power at 25°C 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 70A Protection Category IP22 Efficiency 96% Bluetooth Compatible Yes Dimensions H565 x W320 x D149mm Weight 30Kg Warranty 5 Years

...Read more View Product

Out of Stock

£16.53

Victron Energy MEGA-fuse 200A/32V (5 Pack) – CIP136200010 - new code is CIP138200020

Victron Energy MEGA-fuse 200A/32V (5 Pack) – CIP136200010 Part Number: CIP136200010 - new code is CIP138200020Brand: VictronProduct: FuseAmps: 200-250

£45.94

Victron Energy Orion-Tr 24/12V 20A (240W) DC-DC Converter – ORI241220200

Victron Energy Orion-Tr 24/12V 20A (240W) DC-DC Converter – ORI241220200 High efficiency Using synchronous rectification, full load efficiency exceeds 95%. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools are needed for installation. Brand Victron Energy Manufacturer Part Number ORI241220200R GTIN 8719076023005 Voltage 24/12V Cont. Output Current 20A Protection Category IP43 Efficiency 97% Bluetooth Enabled No Dimensions H73 x W94 x D45mm Weight 0.25Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£59.00

Victron Energy Interface MK3-USB (VE.Bus to USB) – ASS030140000

The MK3-USB allows the following products to connect to a computer for configuration and firmware updates: Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.

...Read more View Product

£280.99

Victron Orion XS 1400 DC-DC battery charger ORI242417040 - Suitable for 12V-12V, 12V-24V, 24V-12V and 24V-24V DC charging, up to 1400W

Victron Orion XS 1400 DC-DC battery charger ORI242417040 Engineered from the ground up, the Orion XS 1400 is Victron Energy's highly anticipated next generation muti-voltage DC-DC charger that redefines charging on the move for dual battery systems. The XS 1400 version differs from the XS in that it can accept an input from either a 12V or 24V alternator and charge either a 12V or 24V battery, with a maximum output of 50A , making it powerful and versatile. It is fully compatible with smart alternators found in Euro 5 or 6 vehicles and has a wide input voltage range to accommodate input cable voltage drop. The input and output current limits can be set by the user and innovative cooling technology provides a 98% efficiency without the need for a fan or heatsink, enabling a lightweight and compact, yet powerful charging unit. There are 8 pre-programmed charging algorithms, or you can create a fully customisable algorithm to match the battery manufacturer's charging voltage requirements. The Orion XS 1400 will produce its full rated output up to 40°C and multiple units can be connected in parallel to increase charge output. It can also be used in fixed-voltage power supply mode with a user-configurable output of 10-35V. A host of electronic protection features guarantee the safety of your alternator and your battery, and physical protection is assured thanks to its P65 dust and water-proof rating. The unit is fully configurable via Bluetooth using the VictronConnect app and features a VE.Direct port for connection to a Cerbo GX or Ekrano GX. This allows remote monitoring and control of the Orion XS 1400 and provides seamless integration with the rest of your Victron system. Multi-voltage use The Orion XS 1400's wide input and output voltage range enable it to be used with any combination of 12V & 24V systems on the input and output, making it suitable for a wide range of vehicles and auxiliary battery systems. The 50A charge current provides a maximum power output of 1400W @24V, and 700W @12V, and an unlimited number of units can be connected in parallel to increase the output (where alternator capacity allows). Settings in the Victron Connect App allow you to select your alternator voltage and type, and your auxiliary battery voltage. Smart alternator compatibility Regardless of the variable input voltage produce by smart alternators, the charger keeps operating and maintains the chosen algorithm for perfect battery charging. The on-board engine running detection system ensures that the charger only activates when the alternator supplies power (i.e. when the engine is running) and prevents your vehicle starter battery being drained when the engine is off. Alternator overload protection The input and output currents can be precisely controlled in increments of 0.1A using simple controls in the Victron Connect App. This input current control guards against alternators being overloaded (especially when using lithium batteries that can accept very high charge currents) and the output current control allows you to set the charge current to suit the type and capacity of battery being charged. Adaptive charge algorithm The Orion XS 1400 includes customisable charging algorithms and 8 pre-set battery modes. For lead acid batteries, these settings ensure optimal absorption times for both shallow and deep discharges. During shallow discharges of lead-acid batteries the absorption time must be kept short in order to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged. Comprehensive electronic protection The Orion XS 1400 comes equipped with comprehensive electronic protection against overload, short circuit and excessive temperatures, and will automatically reduce the output power when maximum product temperature is reached. To prevent damaging lithium batteries the charger will turn off automatically at low temperatures, and to protect the starter battery from being over-discharged it will shut down when the input voltage drops below a configurable lockout value, and restart when the input voltage rises above the restart value. Dust tight & waterproof The Orion XS 1400's ingress protection rating of IP65 makes it dust-tight, protected against heavy rain, and suitable for use in harsh environments such as vehicle engine bays and boat engine rooms. Features Ultimate flexibility - charge a 12V or 24V battery from a 12V or 24V alternator Adjustable input & output current in 0.1A steps 'Smart' or standard alternator compatible Separation of starter and auxiliary batteries Adaptive 4-stage charging algorithm Fully programmable battery charging profile Suitable for all battery types (inc. lithium) Automatic temperature-compensated charging Comprehensive electronic protection Unlimited parallel operation to increase output Power supply mode Remote On/Off Bluetooth Smart enabled VE.Direct port for connection to Cerbo GX or Ekrano GX IP65 waterproof protection Spec Value Input Voltage Range 9V – 35V Output Voltage Range 10V – 35V Adjustable Current 1 – 50A (Input/Output) Efficiency Up to 98.5% Continuous Power Output 700W (at 50A, 12→12/12→24/24→12V up to 40°C), 1400W (24→24V up to 35°C) Standby Current <1.5mA Ingress Protection IP65 (dust-tight, water-resistant) Charge Modes Bulk, Absorption, Float, Storage Battery Support Lithium (LiFePO4), AGM, Gel, Flooded Connection VE.Direct, Remote On/Off, Bluetooth Smart Mounting Orientation Vertical (terminals down)

...Read more View Product

£83.49

Orion 24V/12V-40A DC-DC Converter - ORI241240021

ORI241240021 - The Victron Orion 24V/12V-40A is a non isolated DC-DC Converter. Features of the - Orion 24V/12V-40A DC-DC Converter Remote on-off connector The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by the engine run/stop switch (see manual). All models with adjustable output can also be used as a battery charger For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system. All models with adjustable output can be paralleled to increase output current Up to five units can be connected in parallel. Easy to install Delivery includes four Insulated Fastons Female Crimp 6.3mm (eight Fastons in case of the Orion 24/12-40). Low power models: please see Orion-Tr series PRODUCT CODE: ORI241240021

...Read more View Product

£273.99

Victron 305W Solar Panel – Monocrystalline Panel - SPM043052002

The Victron 305W Monocrystalline Solar Panel is the perfect addition to any off-grid application. They are pre-wired with MC4 connectors, making for easy installation. Their sturdy, anodized aluminium frame allows the solar panels to be easily roof-mounted with a variety of standard mounting systems. 305W solar panel Monocrystalline structure Perfect for boats and campervans Rigid construction Victron Energy Solar Panel 305W Mono series 4b BlueSolar – SPM043052002 The Victron 305W Monocrystalline Solar Panel is the perfect addition to any off-grid application. They are pre-wired with MC4 connectors, making for easy installation. Their sturdy, anodized aluminium frame allows the solar panels to be easily roof-mounted with a variety of standard mounting systems. A sealed, waterproof, multi-functional junction box provides a high level of safety. This Victron 305W solar panel is monocrystalline, which means that each solar PV cell is made of a single silicon crystal. Monocrystalline solar panels are more efficient than polycrystalline solar panels, so you will get a higher solar yield from your panels. Weight 18.4 kg Dimensions 165.8 × 100.2 × 3.5 cm Brand Victron Energy Warranty 5 years Solar panel size 305W Open Circuit Voltage (Voc) 39.7V Cell Type Monocrystalline Short circuit current (Isc) 10.27A Maximum power voltage (Vmpp) 32.5V Maximum power current (Impp) 9.38A Solar panel colour Traditional Solar panel type Rigid Junction box position Rear

...Read more View Product

£19.99

Victron VE.Direct Cable 5m (ASS030530250)

Brand Victron Energy Manufacturer Part Number ASS030530250 Cable Length 5m Warranty 5 Years Country of Manufacture China

...Read more View Product

£13.92

Victron Energy - MEGA-fuse 250A/32V (package of 5 pcs) - CIP136250010

250A Fuse for 12v or 24 systems - Pack of 5 fuses For use with Mega Fuse Holder

...Read more View Product

£159.99

Victron Energy BlueSolar MPPT 150/35 – SCC020035000

Victron Energy BlueSolar MPPT 150/35 – SCC020035000 This Victron 150V 35A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 35A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 150-35 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36* /48V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Max solar panel voltage: 150V- Max solar panel power: 500W (12V) / 1000W (24V) / 1500W (36V) / 2000W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -64mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 20mA (12V) / 15mA (24V) / 10mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 130 x 186 x 70 mm- Mounting dimensions: 176 x 71.5 mm- Weight: 1.25kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£29.99

Victron M8 Connector Male/Female 3 Pole Cable 1m (Bag Of 2)

ASS030560100 - This cable can be used to extend the BMS communication cables between a Lithium Battery Smart and the BMS. It ships in a bag of 2 pieces and is available in 1, 2, 3 and 5 m lengths. PRODUCT CODE: ASS030560100

...Read more View Product

£375.00

Victron Energy AGM Dual Purpose Battery 12V 165Ah (M8) - BAT412151085

The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches.VRLA AGM: design life 7-10 yearsFeaturesVRLA technologyVRLA stands for Valve Regulated Lead Acid, which means that the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure.VRLA batteries are maintenance free for life.Sealed (VRLA) AGM BatteriesAGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of high currents than gel batteries.Low Self-DischargeBecause of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C.Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions.Exceptional Deep Discharge RecoveryVictron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge.Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries, Victron batteries are no exception.Battery Discharging CharacteristicsThe rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C. The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge. The effective capacity decreases with increasing discharge current (see table 1). Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter. GTIN 8719076037040 Voltage 12V Battery Capacity (C20) 165Ah Cold Cranking 600CCA Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) L485 x W172 x H240mm Weight 47Kg Warranty 2 Years Country of Manufacture Vietnam Battery Technology AGM Battery Application Dual Purpose

...Read more View Product

£148.55

Victron Energy Lynx Power In – LYN020102000

A modular DC bus bar, used to connect batteries to the Lynx DC distribution system. The lynx power in module is used to connect batteries via an external fuse. It can be useful if you have multiple parallel strings. Due to the extremely high short circuit current potential of most battery banks, it is suggested to use an external fuse system with an appropriate fault current interruption rating (such as an NH HRC). The Power In contains a negative and positive DC bus-bar with M8 bolts in which to connect batteries cables. It can take cables up to 22 mm in diameter through the bottom entry guides, and no limit via the two side connections.

...Read more View Product

£248.99

Victron Energy Orion-Tr Smart 12/24V 15A (360W) Isolated DC-DC Charger – ORI122436120

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. DC to DC (Battery to Battery) Wiring Diagram, Information and Help Brand Victron Energy Manufacturer Part Number ORI122436120 GTIN 8719076047704 Voltage 12/24V Cont. Output Current 15A Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 88% Bluetooth Enabled Yes Dimensions H130 x W186 x D80mm Weight 1.8Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

Out of Stock

£107.77

Victron Polycrystalline panel 115W-12V Poly 1030x668x30mm series 4b SPP041151202

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

£91.36

Victron Monocrystalline panel 90W-12V Mono 780x668x30mm series 4a SPM040901200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£26.99

Victron VE Direct To USB Interface - ASS030530010

The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single Colour Control GX. This cable measures 177cm in length.

...Read more View Product

£180.99

Victron Energy Orion-Tr Smart 12/24V 15A (360W) Non-isolated DC-DC Charger – ORI122436140

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number ORI122436140 gtin 8719076048961 Voltage 12/24V Cont. Output Current 15A Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 88% Bluetooth Enabled Yes Dimensions H130 x W186 x D80mm Weight 1.8Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£1,710.00

Victron Energy MultiPlus-II 24/5000/120-50 230V – PMP242505010

The 24/5000-120-50 MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. Note: for a short period of time this product was called MultiGrid-II. Features of the MultiPlus-II 24/5000/120-50 PowerAssist The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. ESS: Energy Storage Systems The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. For examples and more detailed information see the ESS (Energy Storage System) manual. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Remote Monitoring and Control When coupled with a Cerbo GX you can monitor and control your MultiPlus-II 24/5000 and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto-starting a backup generator and more…” If you want to access directly, use the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50. Why not look at the VE.Bus Smart dongle which measures battery voltage and temperature allowing monitoring and control with a smart phone or other Bluetooth enabled device. Brand Victron Energy Manufacturer Part Number PMP242505010 GTIN 8719076052913 Voltage 24V Cont. Output Power at 25°C 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 120A Protection Category IP22 Efficiency 96% Bluetooth Compatible Yes Dimensions H607 x W330 x D149mm Weight 30Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£48.27

Victron Monocrystalline panel 40W-12V Mono 425x668x25mm series 4a SPM040401200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£169.99

Victron 1000A 12V/24V/48V Battery Monitoring Smartshunt With Bluetooth - SHU050210050

The Victron Smart Shunt is the perfect solution for monitoring and managing your battery system. With its advanced technology and user-friendly design, the Smart Shunt is a reliable and efficient way to ensure that your battery is always performing at its best. The Smart Shunt is designed to accurately measure the current flowing in and out of your battery and can be easily connected to any battery system. This allows you to monitor the state of your battery in real-time, and make sure that it is always charged and ready to go. In addition to its monitoring capabilities, the Smart Shunt also has a number of advanced features that make it even more useful. For example, it has an integrated Bluetooth module that allows you to connect to your smartphone or tablet, so you can access all of the data and settings from the Smart Shunt on your mobile device. The Smart Shunt also includes a built-in relay that can be used to control other devices, such as a generator or an inverter. This means that you can use the Smart Shunt to automatically start or stop other devices, depending on the state of your battery. Overall, the Victron Smart Shunt is a powerful and versatile tool that can help you better manage your battery system. Whether you're a professional or a hobbyist, the Smart Shunt is the perfect choice for anyone looking to improve the performance and reliability of their battery system. This Victron 1000A VS series SmartShunt uses a high-precision battery shunt designed to expertly measure vital charging and performance data for your batteries. This smart model features additional advanced functions such as Bluetooth communication ability, a secondary input for optional monitoring of an auxiliary battery bank, and an extremely low current draw from the battery bank (0.7Ah per month for a 12V system). Statistics such as battery voltage, charge / discharge current as energy flows in to and out of the battery, Amp Hours consumed, state of charge and time-to-go can be viewed and the settings can be programmed using the inbuilt Bluetooth via any Bluetooth-enabled mobile device, such as a smartphone or tablet. Battery data The SmartShunt measures the vital parameters relating to the battery condition and the energy it receives / provides, and transmits this information via Bluetooth, where it can be viewed by the user (and where some settings can be amended if necessary). This information includes: Battery voltage: Displayed for the main battery / battery bank, and also for an optional auxiliary battery which can be connected via the secondary input. Battery midpoint voltage monitoring: For battery banks constructed of several individual batteries, the SmartShunt is able to maintain balance by taking the voltage measurements from the midpoint within the bank, and if the voltage deviates from this point of balance, an alarm will be generated. For such battery banks, the voltage value is also displayed for the battery bank as a whole, and additionally, for the 'top section' and 'bottom section' (i.e. 1st half and 2nd half) of the battery bank. Battery state of charge: Indicated as a percentage value from 0-100%. Battery charging / discharging current and power: The current (A) and power (W) flowing out of the battery (load consumption) are displayed as negative values, while the current and power flowing into the battery are displayed as positive values. Battery temperature: The SmartShunt can be connected to an optional Victron battery temperature sensor (sold separately). This temperature measurement can be used to adjust available battery capacity as the temperature varies. An alarm will be activated when battery temperature falls outside of the safe range. Amp hours consumed: For example, if 12A is drawn from a fully charged battery during a period of 3 hours, the app will show -36.0Ah consumed by the battery. Time-to-go: The SmartShunt is able to estimate the approximate length of time that the battery will continue to support the current load, before the battery requires re-charging. An in-depth data log also records historical data to enable the user to evaluate usage patterns and determine overall battery health. This includes values such as the highest/ lowest recorded voltages (for the main battery and auxiliary battery), deepest recorded discharge, time since last full discharge, cumulative Amp hours drawn, time since last full charge, total energy charged/discharged and many more. Customisation The user can set high/low thresholds for battery voltage (either battery), battery state of charge (main battery) or the battery temperature (additional sensor required). If any of the above parameters fall outside of this specified range, the battery shunt will activate an alarm on the connected mobile app. Advanced communication This smart battery shunt features inbuilt Bluetooth, enabling the user to wirelessly connect their mobile device to the monitor. Then, using the Victron Connect App on a smartphone or tablet, you will unlock numerous possibilities for advanced programming and remote monitoring of your battery system. A wide range of features are made available, including real-time data transmission, as well as the option to amend battery storage information, program alarms, and set up or join an existing VE.Smart network. Alternatively, the VE Direct USB Cable can be used to establish a connection to a non-Bluetooth-enabled PC/laptop. The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops. Compatibility This SmartShunt is suitable for use with any 12V, 24V or 48V Lead Acid / Gel / AGM / Lithium battery or battery bank. The maximum admissible nominal current through the shunt is 1000A. Additional items The shunt is also supplied with 2 x 1.5m positive supply cables with a fuse to connect the battery shunt to up to two battery banks. If you are looking for different size Victron SmartShunts: Victron Energy SmartShunt 500A/50mV – SHU050150050 Victron 1000A 12V/24V/48V Battery Monitoring Smartshunt With Bluetooth - SHU050210050 Victron 2000A 12V/24V/48V Battery Monitoring Smartshunt With Bluetooth - SHU050220050 Datasheet Victron Smartshunt Datasheet Video

...Read more View Product

£94.89

Victron Energy Blue Smart IP67 Charger 12V 7A 1 Output – BPC120747026

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC120747026 GTIN 8719076035923 Voltage 12V Charge Current 7A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 93% Bluetooth Enabled Yes Plug Type CEE 7/7 Dimensions H85 x W211 x D60mm Weight 1.8Kg Warranty 5 Years

...Read more View Product

£91.93

Victron Battery protect 220A 12V/24V Battery Over Discharge Protector BPR000220400

This Victron 220A 12/24V automatic battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances. Features: Low voltage disconnect: when battery charge is low, the Battery Protect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health. Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs. Overvoltage disconnect: when battery voltage gets too high, the BatteryProtect disconnects the loads to protect them from damage. Automatic system recognition: the BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup. Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect. Remote switch and alarm connections: connect input and output relays to control the BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems. Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging. System Specifications: Nominal battery voltage: 12V / 24V Operating voltage range: 6 - 35V Maximum continuous current: 220A Peak current (30 seconds): 600A Current draw: <1.5mA active, <0.6mA during disconnect Alarm Relay: 50mA Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C) Dimensions: Dimensions: 62 x 123 x 120 mm Weight: 800g M8 terminals Battery Protect Advantages Automatic smart battery protectors offer protection for the discharging of your battery system, preserving your battery health and protecting appliances. Victron Energy offers a range of discharge protectors which are designed to protect a battery bank from over-discharge and extend its lifespan. The discharge protectors offer several advantages and functionality including: -Protecting the battery bank: The discharge protectors protect the battery bank from over-discharge by disconnecting the load when the battery's state of charge (SOC) reaches a certain level. This helps to extend the lifespan of the battery bank by preventing deep discharge cycles. Customizable settings : The discharge protectors have customizable settings, this allows you to set the SOC level at which the load will be disconnected, and also set the reconnection level, depending on your needs and the type of battery you are using. -Advanced monitoring and control: The discharge protectors can be connected to a network for remote monitoring and control, this allows you to monitor the status of the battery bank and adjust settings as needed. -Compatible with other victron energy product: The discharge protectors can work seamlessly with other Victron Energy products such as the Multiplus inverter/charger, and GX devices for advanced monitoring and control. -Easy installation : The discharge protectors are easy to install and they are compatible with different types of battery, you can use them with lead-acid, lithium-ion, and other types of battery. -Reliability: The discharge protectors are built with high-quality and durable components, which ensures reliable and long-lasting performance. Overall, Victron Energy discharge protectors are a useful addition to a battery bank and can help to extend its lifespan by preventing over-discharge. They are easy to install and customizable settings, compatible with different types of batteries, and allow advanced monitoring and control, which makes them suitable for a wide range of applications.

...Read more View Product

£139.28

Victron Orion DC-DC Converter 12V In 24V Out. 20A

Remote on-off connectorThe remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by the engine run/stop switch (see manual).All models with adjustable output can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.All models with adjustable output can be paralleled to increase output currentUp to five units can be connected in parallel.Easy to installDelivery includes four Insulated Fastons Female Crimp 6.3mm (eight Fastons in case of the Orion 24/12-40).Low power models: please see Orion-Tr series GTIN 8719080000000 Cont. Output Current 20A Efficiency 0.93 Bluetooth Enabled No Protection Category IP20 Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£289.00

Victron Energy Phoenix Smart IP43 230v mains Charger (1+1) 12V 30A - PSC123051085

Victron Energy Phoenix Smart IP43 Charger 12/30 (1+1) 12V 30A - PSC123051085 The Phoenix 1+1 model provides 3A to the starter-battery, the rest to the ‘Leisure’ bank. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone. Adaptive, intelligent, dynamic charge features – see the datasheet below.FeaturesBluetooth Smart enabledAny Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.Phoenix Smart (1+1): two outputs to charge 2 battery banksThe second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery.Automatic voltage compensationThe charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases. Please see the manual for details.Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storageThe Phoenix Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used.The right amount of charge: variable absorption timeWhen only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery will be fully charged.Preventing damage due to excessive gassing: the BatterySafe modeIf, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reachedLess maintenance and aging when the battery is not in use: the Storage ModeThe Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the Storage Mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.Also charges Li-ion (LiFePO₄) batteriesCharger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-ion BMS to the remote on-off port. Alternatively full control of voltage and current can be achieved with Bluetooth.Fully programmable charge algorithmThe charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface. Three preprogrammed algorithms can be selected with the mode button (see specifications).Remote on-offThe remote on/off consists of two terminals: Remote H and Remote L. A remote on/off switch or relay contact can be connected between H and L. Alternatively, terminal H can be pulled high, or terminal L can be pulled low. See manual for details.VE.Direct interfaceFor a wired data connection to a Color Control panel, PC or other devices. Please see the VictronConnect app under Downloads / Software on our website.Programmable relayCan be programmed using the VE.Direct interface or a Bluetooth enabled device to trip on an alarm or other events. Brand Victron Energy Manufacturer Part Number PSC123051085 gtin 8719076041900 Voltage 12V Charge Current 30A Input Voltage 230V Number of Outputs 1+1 Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 94% Bluetooth Enabled Yes Dimensions H180 x W249 x D100mm Weight 3.5Kg Country of Manufacture Malaysia Warranty 5 Years Victron IP43 Datasheet Victron IP 43 230v Charger Datasheet

...Read more View Product

£311.46

Victron Energy AGM Super Cycle Battery 12V 125Ah (M8) – BAT412112081

The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches. VRLA AGM: design life 7-10 years Features A truly innovative battery The AGM Super Cycle batteries are the result of recent battery electrochemistry developments. The paste of the positive plates is less sensitive to softening, even in case of repeated 100% discharge of the battery, and new additives to the electrolyte reduce sulfation in case of deep discharge. Exceptional 100% depth of discharge (DoD) performance Tests have shown that the Super Cycle battery does withstand at least three hundred 100% DoD cycles. The tests consist of a daily discharge to 10,8V with I = 0,2C20, followed by approximately two hours rest in discharged condition, and then a recharge with I = 0,2C20. The two hours rest period in discharged condition will damage most batteries within 100 cycles, but not the Super Cycle battery. We recommend the Super Cycle battery for applications where an occasional discharge to 100% DoD, or frequent discharge to 60- 80% DoD is expected. Smaller and lighter An additional advantage of the new chemistry is a slightly smaller size and less weight compared to our standard deep cycle AGM batteries. Low internal resistance The internal resistance is also slightly lower compared to our standard deep cycle AGM batteries Brand Victron Energy Manufacturer Part Number BAT412112081 GTIN 8719076041832 Voltage 12V Battery Capacity (C20) 125Ah Cold Cranking 550CCA Terminal Type M8 Insert Terminal Layout Left Hand Positive Dimensions (Including Terminals) L330 x W171 x H214mm Weight 33Kg Warranty 2 Years Country of Manufacture China Battery Technology AGM

...Read more View Product

£180.99

Victron Energy Blue Smart IP22 Charger 24V 16A 1 Output – BPC241647022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC241647002 GTIN 8719076052470 Voltage 24V Charge Current 16A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£117.69

Victron Smart Batteryprotect 220A 12V/24V Battery Over Discharge Protector BPR122022000 (Bluetooth )

This Victron 220A 12/24V automatic smart battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances. Features: Low voltage disconnect: when battery charge is low, the Smart BatteryProtect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health. Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs. Overvoltage disconnect: when battery voltage gets too high, the Smart Battery Protect disconnects the loads to protect them from damage. Bluetooth connectivity: connect your smartphone for easy programming of the voltage settings. Automatic system recognition: the Smart BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup. Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect. Remote switch and alarm connections: connect input and output relays to control the Smart BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems. Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging. System Specifications: Nominal battery voltage: 12V / 24V Operating voltage range: 6 - 35V Maximum continuous current: 220A Peak current (30 seconds): 600A Current draw: <1.5mA active, <0.6mA during disconnect Alarm Relay: 50mA Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C) Dimensions: Dimensions: 62 x 123 x 120 mm Weight: 800g M8 terminals Battery Protect Advantages Automatic smart battery protectors offer protection for the discharging of your battery system, preserving your battery health and protecting appliances. Victron Energy offers a range of discharge protectors which are designed to protect a battery bank from over-discharge and extend its lifespan. The discharge protectors offer several advantages and functionality including: -Protecting the battery bank: The discharge protectors protect the battery bank from over-discharge by disconnecting the load when the battery's state of charge (SOC) reaches a certain level. This helps to extend the lifespan of the battery bank by preventing deep discharge cycles. Customizable settings : The discharge protectors have customizable settings, this allows you to set the SOC level at which the load will be disconnected, and also set the reconnection level, depending on your needs and the type of battery you are using. -Advanced monitoring and control: The discharge protectors can be connected to a network for remote monitoring and control, this allows you to monitor the status of the battery bank and adjust settings as needed. -Compatible with other victron energy product: The discharge protectors can work seamlessly with other Victron Energy products such as the Multiplus inverter/charger, and GX devices for advanced monitoring and control. -Easy installation : The discharge protectors are easy to install and they are compatible with different types of battery, you can use them with lead-acid, lithium-ion, and other types of battery. -Reliability: The discharge protectors are built with high-quality and durable components, which ensures reliable and long-lasting performance. Overall, Victron Energy discharge protectors are a useful addition to a battery bank and can help to extend its lifespan by preventing over-discharge. They are easy to install and customizable settings, compatible with different types of batteries, and allow advanced monitoring and control, which makes them suitable for a wide range of applications.

...Read more View Product

£55.94

Victron Battery protect 100A 12V/24V Battery Over Discharge Protector BPR000100400

This Victron 100A 12/24V automatic battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances. Features: Low voltage disconnect: when battery charge is low, the Battery Protect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health. Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs. Overvoltage disconnect: when battery voltage gets too high, the BatteryProtect disconnects the loads to protect them from damage. Automatic system recognition: the BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup. Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect. Remote switch and alarm connections: connect input and output relays to control the BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems. Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging. System Specifications: Nominal battery voltage: 12V / 24V Operating voltage range: 6 - 35V Maximum continuous current: 100A Peak current (30 seconds): 600A Current draw: <1.5mA active, <0.6mA during disconnect Alarm Relay: 50mA Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C) Dimensions: Dimensions: 59 x 42 x 115 mm Weight: 500g M8 terminals Battery Protect Advantages Automatic smart battery protectors offer protection for the discharging of your battery system, preserving your battery health and protecting appliances. Victron Energy offers a range of discharge protectors which are designed to protect a battery bank from over-discharge and extend its lifespan. The discharge protectors offer several advantages and functionality including: -Protecting the battery bank: The discharge protectors protect the battery bank from over-discharge by disconnecting the load when the battery's state of charge (SOC) reaches a certain level. This helps to extend the lifespan of the battery bank by preventing deep discharge cycles. Customizable settings : The discharge protectors have customizable settings, this allows you to set the SOC level at which the load will be disconnected, and also set the reconnection level, depending on your needs and the type of battery you are using. -Advanced monitoring and control: The discharge protectors can be connected to a network for remote monitoring and control, this allows you to monitor the status of the battery bank and adjust settings as needed. -Compatible with other victron energy product: The discharge protectors can work seamlessly with other Victron Energy products such as the Multiplus inverter/charger, and GX devices for advanced monitoring and control. -Easy installation : The discharge protectors are easy to install and they are compatible with different types of battery, you can use them with lead-acid, lithium-ion, and other types of battery. -Reliability: The discharge protectors are built with high-quality and durable components, which ensures reliable and long-lasting performance. Overall, Victron Energy discharge protectors are a useful addition to a battery bank and can help to extend its lifespan by preventing over-discharge. They are easy to install and customizable settings, compatible with different types of batteries, and allow advanced monitoring and control, which makes them suitable for a wide range of applications.

...Read more View Product

£860.00

Victron Energy MultiPlus 12v Inverter Charger Compact 12/2000/80-30 VE.Bus – CMP122200000

Victron Energy MultiPlus 12v Inverter Charger Compact 12/2000/80-30 VE.Bus – CMP122200000 The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Brand Victron Energy Manufacturer Part Number CMP122200000 Voltage 12 Transfer Switch (A) 30 Cont. Output Power at 25°C (VA) 2000 Peak Power (W) 3500 Max Efficiency 93% Zero Load Power (W) 9 Charge Current House Battery (A) 80 Charge Current Starter Battery (A) 4 Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Yes Protection Category IP21 Dimensions H520 x W255 x D125mm Weight (kg) 12 Warranty 5 Years Country of Manufacture India

...Read more View Product

£231.29

Lynx Distributor (M10) LYN060102010

Lynx Distributor Board - 4way - 1000A capacity - Mega fuses not included, supplied separately - M10 - (LYN060102000) A modular DC busbar with spaces for four DC fuses. It monitors the status of each fuse and displays its condition with an LED on the front. The Lynx Distributor is part of the modular Lynx distribution system, available as M8 and M10 models. The Lynx Distributor contains a positive and a negative busbar. The positive busbar has four fuse-protected connections with fusemonitoring. The negative busbar has four connections and a ground connection. It is part of the Lynx Distribution system and isavailable in two versions, with M8 or M10 busbar. Note that M10 refers to the busbar connection joints where the modules areconnected to each other. The fuse and cable connections are always M8.The Lynx Distributor has a power LED and four fuse status indication LEDs.If connected to a Lynx Smart BMS, up to 4 Lynx Distributors can send fuse status information to the Lynx Smart BMS

...Read more View Product

£749.00

Victron Energy MultiPlus-II 24/3000/70-32 230V – PMP242305010

Enhance your power management with the Victron MultiPlus-II 24/3000/70-32 (PMP242305010). This inverter/charger blends MultiPlus and MultiGrid functionalities, offering PowerAssist, ESS capability, UPS function, and remote control. Explore advanced features for efficient energy control. PowerAssist Technology Energy Storage Systems (ESS) Uninterrupted AC Power (UPS Function) Remote Monitoring and Control The 24/3000-70-32 MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. Note: for a short period of time this product was called MultiGrid-II. Features of the MultiPlus-II 24/3000/70-32 PowerAssist The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. ESS: Energy Storage Systems The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. For examples and more detailed information see the ESS (Energy Storage System) manual. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The 24/3000-70-32 MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. Note: for a short period of time this product was called MultiGrid-II. Features of the MultiPlus-II 24/3000/70-32 PowerAssist The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. ESS: Energy Storage Systems The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. For examples and more detailed information see the ESS (Energy Storage System) manual. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Remote Monitoring and Control When coupled with a Cerbo GX you can monitor and control your MultiPlus-II 24/3000 and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backupgenerator and more…” If you want to access directly, use the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50. Brand Victron Energy Manufacturer Part Number PMP242305010 gtin 8719076048084 Voltage 24V Cont. Output Power at 25°C 3000VA Peak Power 5500W Output AC Voltage 230V Transfer Switch 32A Max. Battery Charge Current 70A Max. AC Input Current 32A Protection Category IP22 Efficiency 94% Bluetooth Compatible Yes Dimensions H506 x W275 x D147mm Weight 18Kg Warranty 5 Years

...Read more View Product

£1,099.00

Victron Energy Smart Lithium LiFePO4 12V battery 200Ah full cycle bluetooth BMS

Victron Lithium Smart 200Ah LiFePO4 battery is smaller and lighter than lead acid batteries. Incredibly robust with a very long cycle life and very deep discharge available. Connect via Bluetooth to your smartphone to view discharge current and power, discharge duration, cycles and more. Brand: Victron Energy Connectivity technology: Bluetooth Compatible phone models: Most Bluetooth Battery cell composition: Lithium-Phosphate Amperage: 200Ah Nominal voltage: 12.8V Nominal energy: 2560Wh Lithium Smart battery 12,8V With integrated cell balancing Can be parallel and series connected Bluetooth app available to monitor cell voltage and temperature VE.Bus BMS – recommended for systems with our inverter/chargers. miniBMS – recommend for use in small systems. Battery Management System BMS 12/200 – recommended for use in Automotive and Marine’s systems having DC-loads and Alternators. Smart BMS CL 12/100 – recommended for use in Automotive and Marine’s systems having DC-loads and Alternators. Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of an LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery, therefore, consists of 4 cells connected in series, and a 25,6V battery consists of 8 cells connected in series. Rugged A lead-acid battery will fail prematurely due to sulfation: • If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged). • If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime). An LFP battery does not need to be fully charged. Service life even slightly improves in case of a partial charge instead of a full charge. This is a major advantage of LFP compared to lead acid. Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for demanding applications. Efficient In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average leadacid battery is 80%. The round-trip energy efficiency of a LFP battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state). In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions. Bluetooth With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance Battery Specification 200Ah – nominal voltage 12.8V, nominal energy 2560Wh, max. Charge current 400A, max continuous discharge current 400A, recommended max discharge current <200A, end of discharge voltage 10V, dimensions 237 x 321 x 152mm, weight 22kg

...Read more View Product

£72.50

VICTRON ENERGY CYRIX-LI-CT 12/24V 120A INTELLIGENT LI-ION BATTERY COMBINER – CYR010120412

The functionality of the Cyrix-Li-ct is analogous to the Cyrix-ct. The Cyrix-Li-ct will parallel connect a lead acid starter battery and a LiFePO4 battery: if the Charge Disconnect output of the VE.Bus BMS is high, and if it senses 13,4V (resp. 26,8V) or more on one of its power terminals The Cyrix will disengage immediately: when its control output becomes free floating, signalling cell over voltage or cell over temperature, and/or when battery voltage drops below 13,2V. Start assist function: a short positive pulse will close the relay during 30 seconds A built-in transient voltage suppressor will limit the voltage spike that may occur when the Cyrix suddenly disengages due to cell overvoltage or over temperature. Brand Victron Energy Manufacturer Part Number CYR010120412 Voltage 12/24 Continuous current & Breaking capacity at 12V or 24V 120A Current Consumption When Open 4 mA Protection Category IP54 Dimensions H46 x W46 x D80mm Weight (kg) 0.11 Warranty 5 Years

...Read more View Product

£306.00

Victron Energy VE Transfer Switch 5KVA, 1ph, 200-250Vac – COS230502100

The COS230502100 VE Transfer Switch automatically switches between different power sources: between a generator and shore power, between an inverter and a generator, or between an inverter and shore power. The VE Transfer Switch has two inputs and one output, it automatically transfers the available AC power to the output. GTIN 8719076022091 Warranty 5 Years Country of Manufacture Slovenia

...Read more View Product

£890.00

Victron Energy LiFePO4 Battery 12.8V 100Ah Smart – BAT512110610

The Victron Energy 100Ah Smart Battery With integrated cell balancing Can be parallel and series connected Bluetooth app available to monitor cell voltage and temperature Requires one of these BMS-es: VE.Bus BMS – recommended for systems with our inverter/chargers. smallBMS – recommended for use in small systems. Battery Management System BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS CL 12/100 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Lynx Smart BMS – recommended for use in large systems. Features of the 100Ah Smart Battery RuggedA lead-acid battery will fail prematurely due to sulfation:• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid.Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for demanding applications. EfficientIn several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead acid battery is 80%.The round-trip energy efficiency of a LFP battery is 92%.The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state).In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions. Size and weightSaves up to 70% in spaceSaves up to 70% in weight Expensive?LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency. BluetoothWith Bluetooth cell voltages, temperature and alarm status can be monitored.Very useful to localize a (potential) problem, such as cell imbalance. The 100Ah Smart battery is equipped with Bluetooth and uses this to communicate with the VictronConnect app. The VictronConnect app can be used for:• Monitoring the battery status• Monitoring the battery voltage• Monitoring the battery temperature• To find out when the battery was last fully charged• Monitoring the cell balancing status• Monitoring the individual cell voltages• To view or change the battery settings• To update the battery firmware Brand Victron Energy Manufacturer Part Number BAT512110610 GTIN 8719076043041 Voltage 12.8V Battery Capacity (C20) 100Ah Terminal Type M8 Terminal Layout Right Hand Positive Dimensions (Including Terminals) H197 x W321 x D152mm Weight 14Kg Warranty 3 Years Country of Manufacture China Battery Technology Lithium Battery Application Deep Cycle

...Read more View Product

£1,180.00

Victron Energy EasySolar-II 24V 3000VA 70A 32A MPPT 250/70 GX – PMP242307010

Available on back-order Delivery: 7-10 days The EasySolar-II GX combines an MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure. The product is easy to install, with a minimum of wiring. Features The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: A MultiPlus-II inverter/charger A SmartSolar MPPT -Tr solar charge controller A GX device with a 2 x 16-character display. These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device The integrated GX device includes: A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port. A USB port An Ethernet port A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection. Brand Victron Energy Manufacturer Part Number PMP242307010 GTIN 8719076049265 Voltage 24V Cont. Output Power at 25°C 3000VA Peak Power 5500W Output AC Voltage 230V Transfer Switch 32A Max. AC Input Current 32A Max. Battery Charge Current 70A Protection Category IP21 Efficiency 94% Bluetooth Compatible Yes Dimensions H499 x W268 x D237mm Weight 26Kg Warranty 5 Years

...Read more View Product

£349.99

Victron Energy SmartSolar MPPT 150V 70A Tr VE.Can – 150/70 SCC115070411

Victron Energy SmartSolar MPPT 150V 70A Tr VE.Can – 150/70 SCC115070411 The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC115070411 GTIN 8719076050322 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£179.00

Victron Energy BlueSolar MPPT Solar Charge Controller 150/45-Tr – SCC115045222

Victron Energy BlueSolar MPPT Solar Charge Controller 150/45-Tr – SCC115045222 The Victron 150V 45A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring. Ultrafast MPPT Technology: This 45A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array. Inbuilt safety protection: Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring: The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including: Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge. Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters. User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings. The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops. Other features: The Victron BlueSolar MPPT 150-45 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating. This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Specifications: - The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36 / 48V selection*- 2 pairs of terminals (solar panel, battery) for wires up to 35mm2- Max solar panel voltage: 150V- Max solar panel power: 600W (12V) / 1300W (24V) / 1950W (36V) / 2600W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -48mV / -64mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: <35mA (12V) / <20mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 185 x 250 x 95 mm- Mounting dimensions: 225 x 81 mm- Weight: 3kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£69.99

Victron Orion 24V To 12V 25A DC-DC Step Down Converter Non-Isolated 24-12-25A IP20

Victron Orion DC-DC Converter 24v to 12v Non-Isolated, High Power Remote on-offThe remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual). Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24 V system. All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel. IP43 protectionWhen installed with the screw terminals oriented downwards. Screw terminalsNo special tools needed for installation. Input fuseOn 12 V and 24 V input models only. Features of the - Victron Orion 24/12V-25A DC-DC Converter IP20 Victron Orion voltage dropper designed to convert an input voltage of 24V DC (in fact anywhere between 18V and 35V DC) into a 12V DC output. The output voltage of this model can be adjusted between 10 volts and 15 volts DC. This voltage converter is suitable for use on most electrical items on board boats, motorhomes and other automotive applications, including charging a 12V battery on a 24V system. The converter features a remote on-off connector switch enabling it to be operated with a low power switch or by the engine run/stop switch. It can also be connected in parallel with up to 4 other Orion converters to increase the output current. These droppers are easy to install with no special tools needed. Victron Energy Orion 24/12-25 DC-DC converters are very efficient, running at 96% efficiency due to the use of active rectification (also known as synchronous rectification). Remote on-off connector The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by the engine run/stop switch (see manual). All models with adjustable output can also be used as a battery charger For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system. All models with adjustable output can be paralleled to increase output current Up to five units can be connected in parallel. Easy to install Delivery includes four Insulated Fastons Female Crimp 6.3mm (eight Fastons in case of the Orion 24/12-40). PRODUCT CODE: ORI241225020

...Read more View Product

Out of Stock

£1,442.00

Victron Energy LiFePO4 Battery 12,8V 330Ah Smart - BAT512132410

The Victron Energy 330Ah Smart Battery With integrated cell balancing Can be parallel and series connected Bluetooth app available to monitor cell voltage and temperature Requires one of these BMS-es: VE.Bus BMS – recommended for systems with our inverter/chargers. smallBMS – recommended for use in small systems. Battery Management System BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS CL 12/100 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Lynx Smart BMS – recommended for use in large systems. Features of the 330Ah Smart Battery RuggedA lead-acid battery will fail prematurely due to sulfation:• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid.Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for demanding applications. EfficientIn several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead acid battery is 80%.The round-trip energy efficiency of a LFP battery is 92%.The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state).In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions. Size and weightSaves up to 70% in spaceSaves up to 70% in weight Expensive?LFP batteries are expensive when compared to lead acid But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency. BluetoothWith Bluetooth cell voltages, temperature and alarm status can be monitored.Very useful to localize a (potential) problem, such as cell imbalance. The 330Ah Smart battery is equipped with Bluetooth and uses this to communicate with the VictronConnect app. The VictronConnect app can be used for:• Monitoring the battery status• Monitoring the battery voltage• Monitoring the battery temperature• To find out when the battery was last fully charged• Monitoring the cell balancing status• Monitoring the individual cell voltages• To view or change the battery settings• To update the battery firmware Brand Victron Energy Manufacturer Part Number BAT512132410 GTIN 8719076054849 Voltage 12.8V Battery Capacity (C20) 330Ah Terminal Type M10 Terminal Layout Left Hand Positive Dimensions (Including Terminals) H347 x W425 x D274mm Weight 51Kg Warranty 3 Years Country of Manufacture China Battery Technology Lithium Battery Application Deep Cycle

£137.00

Victron Energy VE.Bus BMS V2 – BMS300200200

The VE.Bus BMS and VE.Bus BMS V2 are Battery Management Systems (BMS) designed to interface with and protect a single, or multiple Victron Lithium Battery 12,8V & 25,6V Smart (LiFePO4 or LFP) in systems that have Victron inverters or inverter/chargers with VE.Bus communication. It monitors and protects the batteries against over voltage and under voltage of any individual cell, and also over temperature or under temperature conditions. Features The next generation VE.Bus BMS V2 The VE.Bus BMS V2 is the next generation of the VE.Bus Battery Management System (BMS). It is designed to interface with and protect Victron Lithium Smart (LiFePO4) batteries in systems that have Victron inverters or inverter/chargers that have VE.Bus communication. Protects each individual cell of a Victron Lithium Smart battery For reliable and safe operation, a LiFePO4 battery must be monitored and protected against over voltage and under voltage of any individual cell, and also over temperature or under temperature conditions. The Victron Lithium Smart battery range includes integrated cell voltage monitoring, cell voltage balancing, and temperature monitoring. If the cell voltage or battery temperature is outside of the allowable range, this is communicated to the BMS via two BMS cables with M8 circular connectors. In systems with multiple batteries, the BMS cables of each battery are connected in series (daisy chained), with the first and the last BMS cables connected to the BMS. Based on the status of the Victron Lithium Smart battery or batteries, the BMS will: Generate a pre-alarm signal to alert of an imminent cell under voltage condition. Disable inverting in VE.Bus inverters or inverter/chargers via VE.Bus, and disable other loads via the ‘Load Disconnect’ terminal in the event of a cell under voltage condition. Disable charging in VE.Bus inverters or inverter/chargers via VE.Bus, disable VE.Direct and VE.Can solar chargers via a GX device and disable other chargers via the ‘Charge Disconnect’ terminal in the event of a cell overvoltage, under temperature or over temperature condition. Communication with VE.Bus products MultiPlus, Quattro or Phoenix inverters connect to the ‘MultiPlus/Quattro’ port with a standard RJ45 UTP cable. The BMS disables inverting in the case of a cell under voltage condition and disables charging in the case of a cell over voltage or temperature condition. Communication with remote devices A GX device (such as a Cerbo GX), Digital Multi Control (DMC) panel or a VE.Bus Smart dongle (including any combination) can be connected to the BMS via the ‘Remote panel’ port. These accessories can all be used in combination with the BMS to remotely control the VE.Bus Inverter or inverter/charger switch state (on/off/charger-only). Auxiliary power input and output terminals The BMS has a dedicated power output terminal (GX-Power) for a GX device and an auxiliary power input terminal (Aux-In) for an external DC power source, such as an AC/DC adaptor. In the event of a system shutdown, the GX device will remain powered via the auxiliary power input or be disconnected to prevent further battery discharge. Remote terminals These terminals can be used to switch the BMS on or off. When the BMS is off, both outputs will be free floating so that loads and chargers are turned off. There are two remote terminals, namely, ‘Remote L’ and ‘Remote H’. A remote on/off switch or relay contact can be connected between L and H to switch the BMS on or off. Alternatively, terminal H can be switched to battery plus, or terminal L can be switched to battery Minus. LED indicators The BMS has the following LED indications: Status (blue): Lights shortly once every 10 seconds to indicate normal operation. Temp or Cell>4 V (red): Lights when the charge disconnect output is low because of cell overvoltage or overtemperature. Cell>2.8 V (blue): Lights when the load disconnect output is high and the battery cell voltages are above 2.8 V. GTIN 8719076057277 Brand Victron Energy Manufacturer Part Number BMS300200200 Protection Category IP20 Dimensions H24 x W95 x D106mm Weight 0.12Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£164.99

Victron Monocrystalline panel 215W-24V Mono 1580x808x35mm series 4a SPM042152402

The Victron 215W Monocrystalline Solar Panel is the perfect addition to any off-grid application. They are pre-wired with MC4 connectors, making for easy installation. Their sturdy, anodized aluminium frame allows the solar panels to be easily roof-mounted with a variety of standard mounting systems. 215W solar panel Monocrystalline structure Perfect for boats and campervans Rigid construction GTIN 8719076040378 Voltage 24V Nominal Power 215W Cell Type Monocrystalline Number of Cells in Series 72 Maximum System Voltage 1000V Dimensions L1580 x W808 x D35mm Weight 15Kg Warranty 5 Years Country of Manufacture China

...Read more View Product

£154.95

Victron Energy Blue Smart IP65 Charger 12V 15A 1 Output UK – BPC121531024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC121531024R GTIN 8719076039761 Voltage 12V Charge Current 15A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H60 x W105 x D190mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£63.55

Victron Polycrystalline panel 60W-12V Poly 545x668x25mm series 4a SPP040601200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£404.99

Victron Energy SmartSolar MPPT 150V 85A Tr VE.Can – 150/85 SCC115085411

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC115085411 GTIN 8719076050339 Voltage 12/24/48V Rated Charge Current 85A Nominal PV Power, 12V 1200W Max. PV Short Circuit Current 70A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£171.00

Victron Blue Smart IP67 24/12(1) Battery Charger 24V 12A BPC241247026

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on

...Read more View Product

£242.99

Filax 2 Transfer Switch CE 230V/50Hz-240V/60Hz

The Filax 2 has been designed to switch sensitive loads, such as computers or modern entertainment equipment from one AC source to another. The priority source typically is the mains, a generator or shore power. The alternate source typically is an inverter. With its switching time of less than 20 milliseconds, sensitive loads will continue to operate without disruption. The Filax is not intended to supply high power household equipment like washing machines or electric motors. Open transition transferThe Filax is an open transition (break before make) transfer switch.The maximum load transfer time is 16ms.The load is normally supplied by the priority source, and is transferred to the alternate source if:– The voltage of the priority source drops below the threshold value.– The frequency of the priority source drops below the low frequency threshold value, or increases beyond the high frequency threshold value.Reverse transfer from the alternate source to the priority source is initiated when the priority source has operated within the voltage and frequency reverse switching limits during 30s. Brand Victron Energy Manufacturer Part Number SDFI0000000 gtin 8719076025672 Max. Current 16 A Ingress Protection IP65 Dimensions (Including Terminals) H120 x W255 x D75mm Weight (kg) 0.8 Warranty 5 Years

...Read more View Product

£186.99

Victron Energy Orion-Tr 12/24V 15A (360W) Isolated DC-DC Converter – ORI122441110

Remote on-offThe remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual) Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel IP43 protectionWhen installed with the screw terminals oriented downwards Screw terminalsNo special tools are needed for installation. Input fuseOn 12V and 24V input models only. Brand Victron Energy Manufacturer Part Number ORI122441110 gtin 8719076038832 Voltage 12/24V Cont. Output Current 15A Protection Category IP43 Efficiency 88% Bluetooth Enabled No Dimensions H130 x W186 x D80mm Weight 1.8Kg Warranty 5 Years

...Read more View Product

£160.49

Victron Energy Shore Power Cord 15m 16A/250Vac (3x2.5sqmm) SHP302501500

CE certified Waterproof IP 56 shore power cable and inlet Moulded plug and connector Power indication LED Protection cap on female connector Stainless steel or Polyamide inlet

...Read more View Product

£479.99

Victron SmartSolar MPPT 250/100-Tr VE.Can SCC125110412

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features of the SmartSolar MPPT 250/100-Tr VE.Can MPPT: Ultra Fast Maximum Power Point Tracking By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remote Monitoring and Control Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. Control Your Charger Remotely The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data. Daisy Chain Additional Units The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units. When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device. Remote Monitoring and Control If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s). For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. SmartSolar Control Display The SmartSolar MPPT 250/100-Tr VE.Can charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device. TECHNICAL SPECIFICATIONS Brand Victron Energy Manufacturer Part Number SCC125110412 GTIN 8719076055662 Voltage 12/24/48V Rated Charge Current 100A Nominal PV Power, 12V 1450W Max. PV Short Circuit Current 70A Max. PV Open Circuit Voltage 250V absolute maximum coldest conditions 245V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled Yes Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years

...Read more View Product

£124.99

VSR Kit - Victron Cyrix-Ct 120A kit with all required components

This voltage-sensitive relay kit comes complete with all the necessary components to integrate the Victron Cyrix-ct 120A into your campervan or motorhome's electrical setup. The kit comprises: Victron Cyrix-ct 120A battery combiner 2 x 150A MEGA fuses 2 x Victron MEGA fuse holders Red and black cables - 50mm2 for lengths up to 8m 6mm Control Cables Cable lugs for connections to the starter battery and leisure battery Cyrix-ct 120A Battery Combiner The Cyrix-ct 120A functions as a voltage-sensitive relay, automatically linking your leisure and starter batteries when a specific charge voltage is reached, and separating them when the voltage drops below the float level, indicating discharge. This model is capable of charging a leisure battery at up to 120A/hr. For additional details, refer to our split charge relay explanation. IMPORTANT: The Cyrix-ct battery combiner, a voltage-sensitive relay, is not suitable for vehicles with Euro 5 or Euro 6 engines that utilize a smart alternator. Most vehicles registered post-September 2013 fall under Euro 5 or 6, which you can verify with your V5C document. In such cases, a battery-to-battery charger is recommended. Applications A voltage-sensitive relay (VSR) is only viable in vehicles without Euro 5 or Euro 6 engines and with lead-acid (not lithium) leisure batteries. Intelligent Battery Monitoring Unlike basic relays, the Cyrix-ct 120A employs advanced software to monitor battery voltage trends over time, connecting or disconnecting batteries not just on immediate voltage levels but also considering the direction of voltage change with a specific time delay. This method prevents disconnection during short, high-amperage loads and ensures connectivity with large, discharged battery banks without immediate disengagement due to voltage drop. Overheating Protection The Cyrix disengages in the event of excessive contact temperature and will reengage once it cools down, providing an additional layer of protection for your system.

...Read more View Product

£374.99

Victron Energy AGM Dual Purpose Battery 12V 165Ah – BAT412151084

The Victron Energy 12V 165Ah AGM battery has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches. Features of the 12V 165Ah AGM battery Sealed (VRLA) AGM BatteriesAGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of high currents than gel batteries. Low Self-DischargeBecause of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C.Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions. Exceptional Deep Discharge RecoveryVictron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge.Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries,Victron batteries are no exception. Battery Discharging CharacteristicsThe rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C.The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge.The effective capacity decreases with increasing discharge current. Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter. Looking to protect the battery against excessive discharge, the BatteryProtect is just what you are after. Learn more about batteries and battery chargingTo learn more about batteries and charging batteries (including the pro’s and cons of multi-bank charging and intelligent charging), please refer to Electricity on Board. Want to improve battery charging? Why not take a look at the Victron Energy Battery Sense which measures voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided – guaranteeing the correct charge-voltage. Brand Victron Energy Manufacturer Part Number BAT412151084 GTIN 8719076037033 Voltage 12V Battery Capacity (C20) 165Ah Cold Cranking 600CCA Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) L485 x W172 x H240mm Weight 47Kg Warranty 2 Years Battery Technology AGM Battery Application Deep Cycle Country of Manufacture Vietnam

...Read more View Product

£229.99

Victron BMS Smart Battery Management System 12/200 - BMS210055000

Smart BMS 12/200 The Smart BMS 12/200 is an all-in-one Battery Management system for Victron Lithium-Iron-Phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator such as in vehicles and boats. It combines a Current Limiter, Battery Combiner and Battery Protector in a robust and compact solution and lets you safely connect any size 12V alternator (and starter battery), loads and chargers to Smart Lithium batteries. The Smart BMS 12/200 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources or DC loads in case of low battery cell voltage, high battery cell voltage or over temperature. The dedicated alternator connection provides current limiting and one-way traffic from the alternator into the battery, this so any size alternator (and starter battery) can be safely connected to the Smart Lithium battery (or battery bank) and the starter battery is protected from excessive discharge. The BMS is equipped with Bluetooth for monitoring and configuration, a remote on/off connector, to turn the BMS (and the system) off via a remote switch and a pre-alarm contact, to give a warning signal before the BMS will disconnect the batteries from the system. The BMS is also equipped with a remote on off connector, to turn the BMS (and the system) off via a remote switch. Features of the - Victron Energy Smart BMS CL 12/100 The Smart BMS CL 12/100 is a Battery Management system for Victron lithium-iron-phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator. The BMS CL 12/100 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources or DC loads in case of low battery voltage, high battery voltage or over temperature. The dedicated alternator input provides current limiting and one-way traffic from the alternator into the battery, this so any size alternator (and start battery) can be safely connected to the Smart Lithium battery or batteries. The BMS is also equipped with a remote on off connector, to turn the BMS (and the system) off via a remote switch, and a pre-alarm contact, to give a warning signal before the BMS will disconnect the batteries from the system. Battery Management system The BMS connects to 12,8V Victron LiFePO4 (LFP) batteries. Up to 5 batteries may be connected in parallel. Can be used as a system on/off switch. Alternator and battery protection The input current is electronically limited to approximately 90% of the fuse rating. A 100A fuse, for example, will therefore limit the input current to approximately 90A. Choosing the right fuse will: a. Protect the LFP battery against excessive charge current (important in case of a low capacity LFP battery). b. Protect the alternator against overload in case of a high capacity LFP battery bank (most 12V alternators will overheat and fail if running at maximum output during more than 5 minutes). Starter battery Protection This function is similar to that of a Cyrix Battery Combiner or Argo FET Battery Isolator. Current can flow to the LFP battery only if the input voltage (= voltage on the starter battery) exceeds 13V. And current cannot flow back from the LFP battery to the starter battery, thus preventing eventual damage to the LFP battery due to excessive discharge. Li-ion battery protection Excessive input voltage and transients are regulated down to a safe level. The Smart BMS CL will stop charging in case of cell over voltage or over temperature. It has three outputs, similar to the miniBMS. Load Disconnect output The Load output is normally high and becomes free floating in case of imminent cell under voltage (default 2,8V/cell, adjustable on the battery between 2,6V and 2,8V per cell). Maximum current: 10mA. The Load output can be used to control the remote on/off input of a Battery Protect, inverter, DC-DC converter or other loads. Pre-Alarm output The pre-alarm output can be used as warning when the battery voltage is low and it will trip shortly before the Load Disconnect output is disabled due to cell under voltage. The pre-alarm output may be used to drive a relay, LED or Buzzer. It can be configured as continuous or intermittent signal. The pre-alarm output is normally free floating and becomes high in case of imminent cell under voltage (default 3,1V/cell, adjustable on the battery between 2,85V and 3,15V per cell). Maximum current: 1A (not short circuit protected) The minimum delay between pre-alarm and load disconnect is 30 seconds. Charge disconnect output The Charger output is normally high and becomes free floating in case of imminent cell over voltage or over temperature. Maximum current: 10mA. The Charger output is not suitable to power an inductive load such as a relay coil. The Charger output can be used to control: The remote on/off of a charger, a Cyrix-Li-Charge relay, a Cyrix-Li-ct Battery Combiner. (Note: in some cases an interface cable will be needed, please see the manual.) Remote on/off input The remote on/off input controls the charging via the alternator. When off, charging via the alternator is disabled, while the BMS functionality will remain active allowing any loads and chargers to continue working regardless of the state of the remote input. When “system on/off switch” is enabled via VictronConnect, the BMS functionality will also be disabled. It consists of two terminals: Remote L and Remote H. A remote on-off switch or relay contact can be connected between H and L. Alternatively, terminal H can be switched to battery plus, or terminal L can be switched to battery minus. Ignition proof No relays but MOSFET switches, and therefore no sparks.

...Read more View Product

£213.49

Victron Energy Orion-TR SMART 24/24-17A (400W) Non-Isolated DC-DC Charger - ORI242440140

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downward. Screw terminals No special tools needed for installation. Input fuse (not replaceable) Brand Victron Energy Manufacturer Part Number ORI242440140 Input voltage range 20-35V Under voltage shut down 14V Under voltage restart 15V Nominal output voltage 24.2V Output voltage adjust range 20-30V Cont. output current at nominal output voltage and 40°C 17A Short circuit output current 40A Cont. output power at 25°C 480W Cont. output power at 40°C 400W Efficiency 89% DC connection Screw Terminals IP Rating IP43 Dimensions H130 x W186 x D80mm Weight 1.6Kg Warranty 5 Years

...Read more View Product

£126.90

Victron Energy SmartShunt IP65 500A – SHU065150050

The SmartShunt IP65 500A is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor. Differences compared to BMV-712 Battery Monitor– No programmable visual and audible alarm– No programmable relay Why should I monitor my battery with the SmartShunt IP65 500A?Batteries are used in a wide variety of applications, mostly to store energy for later use. But how much energy is stored in the battery? No one can tell by just looking at it. The service life of batteries depends on many factors. Battery life may be shortened by under-charging, over-charging, excessively deep discharges, excessive charge or discharge currents, and by high ambient temperature. Monitoring the battery with a battery monitor will give important feedback to the user so that remedial measures can be taken when necessary. Doing this will extend battery life and the battery monitor will quickly pay for itself. The VictronConnect appThe VictronConnect app is essential to set up and to monitor the SmartShunt IP65 500A.The app can connect to the battery monitor via:• Bluetooth• USB, via the optional VE.Direct to USB interface The app is available for the following platforms:• Android• Apple iOS (Note that USB is not supported, it is only possible to connect via Bluetooth)• MacOs• Windows (Note that Bluetooth is not supported, it is only possible to connect via USB). The VictronConnect app can be downloaded from app stores or from the VictronConnect product page. Brand Victron Energy Manufacturer Part Number SHU065150050 GTIN 8719076057895 Protection Category IP65 Bluetooth Enabled Yes Dimensions H46 x W120 x D54mm Warranty 5 Years Country of Manufacture India

...Read more View Product

£660.00

Victron Energy MultiPlus Compact 12V 1600VA 70A 16A VE.Bus – CMP121620000

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications). On-site Monitoring and control Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232). Remote Monitoring and control Color Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. Remote configuring When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely Brand Victron Energy Manufacturer Part Number CMP121620000 GTIN 8719076021964 Voltage 12V Cont. Output Power at 25°C 1600VA Peak Power 3000W Output AC Voltage 230V Transfer Switch 16A Charge Current House Battery 70A Charge Current Starter Battery 4A Protection Category IP21 Efficiency 93% Bluetooth Compatible No Dimensions H375 x W214 x D110mm Weight 10Kg Warranty 5 Years

...Read more View Product

Out of Stock

£16.53

Victron Energy MEGA-fuse 150A/32V (5 pack) – CIP136150010

Victron Energy MEGA-fuse 150A/32V (5 pack) – CIP136150010 Brand Victron Energy Manufacturer Part Number CIP136150010 Warranty 5 Years Appr. Voltage Drop 90 mV Cold Resistance 0.35

£73.19

Victron Energy Blue Smart IP65s Charger 12V 5A 1 Output UK – BPC120533024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC120533024R GTIN 8719076041214 Voltage 12V Charge Current 5A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H45 x W81 x D182mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£849.00

Victron Energy Phoenix Inverter 12V 3000VA VE.Bus – PIN123020000

Pure sine wave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds. SinusMax – Superior engineeringDeveloped for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem free, to any load. Parallel and 3-phase operation capabilityUp to 6 Phoenix Inverters can operate in parallel to achieve higher power output. Six 24 V 5000 VA units, for example, will provide 24 kW / 30 kVA output power. Operation in 3-phase configuration is also possible. Features SinusMax – Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. Virtually unlimited power thanks to parallel and 3-phase operation capability Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible. To transfer the load to another AC source: the automatic transfer switch If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds). Communications interface These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control. Brand Victron Energy Manufacturer Part Number PIN123020000 GTIN 8719076023579 Voltage 12V Cont. Output Power at 25°C 3000VA Peak Power 6000W Output AC Voltage 230V Protection Category IP21 Efficiency 93% Bluetooth Enabled No Dimensions H362 x W258 x D218mm Weight 18Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£319.99

Victron Energy BlueSolar MPPT 150/70 MC4 – SCC010070300

Victron Energy BlueSolar MPPT 150/70 MC4 – SCC010070300 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98 %. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature (and current, in case of a BMV-712 or a SmartShunt) to one or more BlueSolar Charge Controllers. (VE.Direct Bluetooth Smart dongle needed) Real-time data display options Color Control GX or other GX devices: see the Venus documents on our website. A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC010070300 GTIN 8719076025528 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150 V absolute maximum coldest conditions, 145 V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H215 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£155.35

Victron Energy Blue Smart IP22 Charger 24V 12A 1 Output – BPC241242022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC241242002 GTIN 8719076037682 Voltage 24V Charge Current 12A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£79.95

Victron Smart Batteryprotect 100A 12V/24V Battery Over Discharge Protector Sbp-100 (Bluetooth Inbuilt)

This Victron 100A 12/24V automatic smart battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances. Features: Low voltage disconnect: when battery charge is low, the Smart BatteryProtect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health. Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs. Overvoltage disconnect: when battery voltage gets too high, the Smart Battery Protect disconnects the loads to protect them from damage. Bluetooth connectivity: connect your smartphone for easy programming of the voltage settings. Automatic system recognition: the Smart BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup. Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect. Remote switch and alarm connections: connect input and output relays to control the Smart BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems. Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging. System Specifications: Nominal battery voltage: 12V / 24V Operating voltage range: 6 - 35V Maximum continuous current: 100A Peak current (30 seconds): 600A Current draw: <1.5mA active, <0.6mA during disconnect Alarm Relay: 50mA Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C) Dimensions: Dimensions: 59 x 42 x 115 mm Weight: 500g M8 terminals Battery Protect Advantages Automatic smart battery protectors offer protection for the discharging of your battery system, preserving your battery health and protecting appliances. Victron Energy offers a range of discharge protectors which are designed to protect a battery bank from over-discharge and extend its lifespan. The discharge protectors offer several advantages and functionality including: -Protecting the battery bank: The discharge protectors protect the battery bank from over-discharge by disconnecting the load when the battery's state of charge (SOC) reaches a certain level. This helps to extend the lifespan of the battery bank by preventing deep discharge cycles. Customizable settings : The discharge protectors have customizable settings, this allows you to set the SOC level at which the load will be disconnected, and also set the reconnection level, depending on your needs and the type of battery you are using. -Advanced monitoring and control: The discharge protectors can be connected to a network for remote monitoring and control, this allows you to monitor the status of the battery bank and adjust settings as needed. -Compatible with other victron energy product: The discharge protectors can work seamlessly with other Victron Energy products such as the Multiplus inverter/charger, and GX devices for advanced monitoring and control. -Easy installation : The discharge protectors are easy to install and they are compatible with different types of battery, you can use them with lead-acid, lithium-ion, and other types of battery. -Reliability: The discharge protectors are built with high-quality and durable components, which ensures reliable and long-lasting performance. Overall, Victron Energy discharge protectors are a useful addition to a battery bank and can help to extend its lifespan by preventing over-discharge. They are easy to install and customizable settings, compatible with different types of batteries, and allow advanced monitoring and control, which makes them suitable for a wide range of applications.

...Read more View Product

£319.99

Victron Energy BlueSolar MPPT 150/70-Tr – SCC010070200

Victron Energy BlueSolar MPPT 150/70-Tr – SCC010070200 This Victron 150V 70A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 70A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 150-70 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Brand Victron Energy Manufacturer Part Number SCC010070200 GTIN 8719076025511 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150 V absolute maximum coldest conditions, 145 V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£149.99

Victron Energy Orion-Tr Smart 24/12V 20A (240W) Isolated DC-DC Charger – ORI241224120

Victron Energy Orion-Tr Smart 24/12V 20A (240W) Isolated DC-DC Charger – ORI241224120 The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number ORI241224120 gtin 8719076046080 Voltage 24/12V Cont. Output Current 20A Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 88% Bluetooth Enabled Yes Dimensions H130 x W186 x D70mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£299.99

Victron Energy Centaur Charger 12V 20A 3 Outputs - CCH012020000

The Centaur range of battery chargers features auto-ranging input covering 90-265VAC 50/60Hz input meaning they can be used anywhere in the world.Crucially, and unlike many other products that state universal input, the Centaur range will maintain full output power within the entire specified range. Other features include fully automatic three stage charge characteristic that ensures batteries are fully charged every time and three isolated charge outputs for multi battery configurations to suit the majority of typical installations.FeaturesQuality without compromiseAluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions.Universal 90-265V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation)All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz.The chargers also accept a 90-400 V DC supply.Three outputs that each can supply the full output currentThree isolated outputs to simultaneously charge 3 battery banks Each output is capable to supply the full rated current.Three-stage charging, with temperature compensationThe Centaur charges at bulk rate until the output has reduced to 70% of the rated Amps, at which a 4 hour timer begins. After the timed period the charger switches to float rate. An internal temperature sensor is used to compensate the charge voltage with – 2 mV/ºC (– 1 mV/ºF) per cell. A DIP switch is available to select the optimum charge/float voltages for Flooded Lead-acid, Gel or AGM batteries. GTIN 8719076021476 Voltage 12V Charge Current 20A Input Voltage 90-265V Number of Outputs 3 Bluetooth Enabled No Protection Category IP20 Dimensions H355 x W215 x D110mm Weight 3.8Kg Warranty 5 Years Country of Manufacture Malaysia

...Read more View Product

£682.99

Victron Energy Lithium SuperPack 12,8V 100Ah (M8) High Current – BAT512110710

Victron Energy Lithium SuperPack 12,8V 100Ah (M8) High Current – BAT512110710 The SuperPack batteries are extremely easy to install, not needing any additional components.The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. The batteries can be connected in parallel. Series connection is not allowed. Features Integrated BMS and safety switch The SuperPack batteries are extremely easy to install, needing no additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. Abuse proof A lead-acid battery will fail prematurely due to sulfation: If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged). If it is left partially charged or worse, fully discharged. A Lithium-Ion battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of Li-ion compared to lead-acid. The SuperPack batteries will cut-off the charge or discharge current when the maximum ratings are exceeded. Efficient In several applications (especially off-grid solar), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%. The round-trip energy efficiency of a Li-ion battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy are required (battery operating in 70% to 100% charged state). In contrast, a Li-ion battery will still achieve 90% efficiency even under shallow discharge conditions. Can be connected in parallel The batteries can be connected in parallel. Series connection is not allowed. Use in upright position only. Brand Victron Energy Manufacturer Part Number BAT512110710 gtin 8719076053019 Voltage 12.8V Battery Capacity (C20) 100Ah Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) H220 x W330 x D172mm Weight 14Kg Warranty 3 Years Battery Technology Lithium Battery Application Deep Cycle Country of Manufacture China

...Read more View Product

£159.99

Victron Energy Lithium SuperPack 12.8V 20Ah (M5) - BAT512020705

Victron Energy Lithium SuperPack 12.8V 20Ah (M5) - BAT512020705 The SuperPack batteries are extremely easy to install, not needing any additional components.The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. The batteries can be connected in parallel. Series connection is not allowed. Features Integrated BMS and safety switch The SuperPack batteries are extremely easy to install, needing no additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. Abuse proof A lead-acid battery will fail prematurely due to sulfation: If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged). If it is left partially charged or worse, fully discharged. A Lithium-Ion battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of Li-ion compared to lead-acid. The SuperPack batteries will cut-off the charge or discharge current when the maximum ratings are exceeded. Efficient In several applications (especially off-grid solar), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%. The round-trip energy efficiency of a Li-ion battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy are required (battery operating in 70% to 100% charged state). In contrast, a Li-ion battery will still achieve 90% efficiency even under shallow discharge conditions. Can be connected in parallel The batteries can be connected in parallel. Series connection is not allowed. Use in upright position only. Brand Victron Energy Manufacturer Part Number BAT512020705 gtin 8719076047537 Voltage 12.8V Battery Capacity (C20) 20Ah Terminal Type M6 Terminal Layout Right Hand Positive Dimensions (Including Terminals) H167 x W181 x D77mm Weight 3.5Kg Warranty 3 Years Battery Technology Lithium Battery Application Deep Cycle Country of Manufacture China

...Read more View Product

£244.99

Victron Energy Filax 2 Transfer Switch CE 110V 50Hz-120V 60Hz – SDFI0000110

Victron Energy Filax 2 Transfer Switch CE 110V 50Hz-120V 60Hz – SDFI0000110 The Filax 2 has been designed to switch sensitive loads, such as computers or modern entertainment equipment from one AC source to another. The priority source typically is the mains, a generator or shore power. The alternate source typically is an inverter. With its switching time of less than 20 milliseconds, sensitive loads will continue to operate without disruption. The Filax is not intended to supply high power household equipment like washing machines or electric motors. Open transition transferThe Filax is an open transition (break before make) transfer switch.The maximum load transfer time is 16ms.The load is normally supplied by the priority source, and is transferred to the alternate source if:– The voltage of the priority source drops below the threshold value.– The frequency of the priority source drops below the low frequency threshold value, or increases beyond the high frequency threshold value.Reverse transfer from the alternate source to the priority source is initiated when the priority source has operated within the voltage and frequency reverse switching limits during 30s. Brand Victron Energy Manufacturer Part Number SDFI0000110 gtin 8719076025689 Max. Current 16 A Ingress Protection IP65 Dimensions (Including Terminals) H120 x W255 x D75mm Weight (kg) 0.8 Warranty 5 Years Country of Manufacture Malaysia

...Read more View Product

£496.49

VICTRON ENERGY 12V 220AH AGM DEEP CYCLE BATTERY - BAT412201085 (M8)

The Victron Energy 12V 220Ah AGM battery has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches. Features of the 12V 220Ah AGM battery Sealed (VRLA) AGM BatteriesAGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of high currents than gel batteries. Low Self-DischargeBecause of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C.Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions. Exceptional Deep Discharge RecoveryVictron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge.Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries,Victron batteries are no exception. Battery Discharging CharacteristicsThe rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C.The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge.The effective capacity decreases with increasing discharge current. Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter. Brand Victron Energy Manufacturer Part Number BAT412201085 GTIN 8719076037095 Voltage 12V Battery Capacity (C20) 220Ah Cold Cranking 650CCA Terminal Type M8 Terminal Layout Side Dimensions (Including Terminals) L522 x W238 x H240mm Weight 65Kg Warranty 2 Years Country of Manufacture Vietnam Battery Technology AGM Battery Application Dual Purpose

...Read more View Product

Out of Stock

£29.99

Victron Energy MEGA-fuse 200A/58V for 48V products (1 pc) – CIP137200010

Victron MEGA-fuse 200A/58V for 48V products (1 pc) (CIP137200010)

£380.00

Victron Energy VE Transfer Switch 10KVA, 1ph, 200-250Vac – COS230103100

The COS230103100 VE Transfer Switch automatically switches between different power sources: between a generator and shore power, between an inverter and a generator, or between an inverter and shore power. The VE Transfer Switch has two inputs and one output, it automatically transfers the available AC power to the output. GTIN 8719076022084 Warranty 5 Years Country of Manufacture Slovenia

...Read more View Product

Out of Stock

£1,399.00

Victron Energy Phoenix Inverter 24V 5000VA Smart – PIN242500000

The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems. It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave. Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish. Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect. Features Bluetooth built-in: fully configurable with a tablet or smartphone Low battery voltage alarm Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Alarm relay Monitoring: In- and output voltage, load and alarms VE.Direct communication port The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters. Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch. Brand Victron Energy Manufacturer Part Number PIN242500000 GTIN 8719076047933 Voltage 24V Cont. Output Power at 25°C 5000VA Peak Power 10000W Output AC Voltage 230V Protection Category IP21 Efficiency 95% Bluetooth Enabled Yes Dimensions H595 x W295 x D160mm Weight 29Kg Warranty 5 Years Country of Manufacture India

£268.99

Victron GX Touch 70 - BPP900455070

Victron GX Touch 70 (BPP900455070) Panels and system monitoring Victron GX Touch 70 is the display accessory for the Cerbo GX. The seven inch a touch screen display gives an instant overview of your system and allows to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, its super slim waterproof design, top-mountable setup and its simple installation bring a lot of flexibility when creating a crisp and clean dashboard. Simply mounted The GX Touch is optimised to more than meet the standards of installer professionals. The screen is simply bolted on top of a dashboard, eliminating the need to create perfect cut-outs and is connected through just one cable, taking away the hassle of having to bring many wires to a dashboard. The GX Touch 70 is a companion to the Cerbo GX, the all-new communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the GX Touch 70, a MFD or our VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. DIMENSIONS 113 × 176 × 13.5 mm BRAND Victron Energy COLOUR Black COUNTRY OF ORIGIN Malaysia GLOBAL IDENTIFIER (GTIN CODE) 8719076054344 INTRASTAT STATISTICAL CODE 85285900 MANUFACTURER Victron Energy QUANTITY PER MASTERBOX 18 QUANTITY PER PALLET 540 SIZE 113 x 176 x 13,5

...Read more View Product

£249.45

Victron Energy AGM Dual Purpose Battery 12V 110Ah – BAT412101084

Victron Energy AGM Dual Purpose Battery 12V 110Ah – BAT412101084 The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches. VRLA AGM: design life 7-10 years Features VRLA technology VRLA stands for Valve Regulated Lead Acid, which means that the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure. VRLA batteries are maintenance free for life. Sealed (VRLA) AGM Batteries AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of high currents than gel batteries. Low Self-Discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C. Victron VRLA batteries can therefore be stored for up to a year without recharging if kept under cool conditions. Exceptional Deep Discharge Recovery Victron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge. Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries, Victron batteries are no exception. Battery Discharging Characteristics The rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C. The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge. The effective capacity decreases with increasing discharge current (see table 1). Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter. Brand Victron Energy Manufacturer Part Number BAT412101084 GTIN 8719076036968 Voltage 12V Battery Capacity (C20) 110Ah Cold Cranking 500CCA Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) L330 x W171 x H220mm Weight 32Kg Warranty 2 Years Country of Manufacture Vietnam Battery Technology AGM Battery Application Dual Purpose

...Read more View Product

£123.95

Victron Energy Blue Smart IP65 Charger 12V 10A 1 Output UK – BPC121031024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC121031024R GTIN 8719076039754 Voltage 12V Charge Current 10A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H60 x W105 x D190mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£820.00

Victron Energy MultiPlus-II 48V 5000VA 70A 50A GX – PMP482506000

An Inverter/Charger with device networking built-in, the MultiPlus-II GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation. Capable of parallel operation for increased power output, or battery charge-rates, the MultiPlus-II GX can also be configured for three-phase supply. A host of advanced features – such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power – can all be controlled straight from your phone or smart device. Remote monitoring is also possible. Features A MultiPlus-II with LCD and GX functionality The MultiPlus-II GX integrates a MultiPlus-II inverter/charger and a GX device with a 2 x 16 character display. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. GX device The integrated GX device includes: A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port. A USB port. A Ethernet port. A VE.Direct port. Applications The MultiPlus-II GX is intended for applications where additional interfacing with other products and/or remote monitoring is required, such as on-grid or off-grid energy storage systems and certain mobile applications. Parallel and three phase operation Only one GX unit is needed in case of Parallel and three phase operation. Brand Victron Energy Manufacturer Part Number PMP482506000 GTIN 8719076048824 Voltage 48V Cont. Output Power at 25°C 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 70A Protection Category IP22 Efficiency 96% Bluetooth Compatible Yes Dimensions H506 x W275 x D147mm Weight 26Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£30.07

Victron Polycrystalline panel 20W-12V Poly 440x350x25mm series 4a SPP040201200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£126.49

Victron Energy Phoenix Inverter 12V 375VA VE.Direct UK – PIN121371400

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. Features VE.Direct communication port The VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number PIN123750400 GTIN 8719076034001 Voltage 12V Cont. Output Power at 25°C 375VA Peak Power 700W Output AC Voltage 230V Protection Category IP21 Efficiency 89% Bluetooth Enabled No Plug Type UK Dimensions H86 x W165 x D260mm Weight 3Kg Warranty 5 Years

...Read more View Product

£580.99

Victron Enery BlueSolar MPPT 250/100 Tr VE.Can – SCC125110441

Victron Enery BlueSolar MPPT 250/100 Tr VE.Can – SCC125110441 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 99%. Flexible charge algorithm Fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more BlueSolar Charge Controllers. (VE.Direct Bluetooth Smart dongle needed) VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. Brand Victron Energy Manufacturer Part Number SCC125110441 GTIN 8719076050926 Voltage 12/24/48V Rated Charge Current 100A Nominal PV Power, 12V 1450W Max. PV Short Circuit Current 70A Max. PV Open Circuit Voltage 150V resp. 250V absolute maximum coldest conditions, 145V resp. 245V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled No Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years Country of Manufacture Malaysia

...Read more View Product

£139.45

Victron Energy Blue Smart IP67 Charger 12V 17A 1 Output UK – BPC121747026

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC121713006 GTIN 8719076038252 Voltage 12V Charge Current 17A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 95% Bluetooth Enabled Yes Plug Type UK Dimensions H99 x W219 x D65mm Weight 2.4Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£216.95

Victron Energy Blue Smart IP22 Charger 24V 16A 3 Outputs BPC241648022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC241648022 GTIN 8719076052517 Voltage 24V Charge Current 16A Input Voltage 230V Number of Outputs 3 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£209.95

Victron Energy Blue Smart IP22 Charger 24V 16A 3 Outputs UK – BPC241648022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC240842002 GTIN 8719076037491 Voltage 24V Charge Current 8A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

Best Seller

£1,171.00

Victron Energy MultiPlus 12v Inverter Charger 12/3000/120-16 VE.Bus – PMP122300001

Victron Energy MultiPlus 12v Inverter Charger 12/3000/120-16 VE.Bus – PMP122300001 The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Brand Victron Energy Manufacturer Part Number PMP122300001 Voltage 12 Transfer Switch (A) 50 Cont. Output Power at 25°C (VA) 3000 Peak Power (W) 6000 Max Efficiency 93% Zero Load Power (W) 20 Charge Current House Battery (A) 120 Charge Current Starter Battery (A) 4 Battery Temperature Sensor Yes Programmable Relay Yes (3x) Remote on-off Yes Protection Category IP21 Dimensions H362 x W258 x D218mm Weight (kg) 19 Warranty 5 Years Country of Manufacture India

...Read more View Product

£469.99

Victron Smartsolar Mppt 150/100 100A Solar Charge Controller

Victron Smartsolar Mppt 150/100 100A Solar Charge Controller This Victron 150V 100A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. SmartSolar MPPT controllers uniquely feature built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, along with a programmable relay with various signalling options.Ultrafast MPPT Technology:This 100A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, reverse polarity, overvoltage, overcurrent and reverse current, as well as battery overvoltage, reverse polarity and overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional LCD display:Alternatively, this SmartSolar controller features a connection area for an optional Plug-in LCD display (sold separately). Simply remove the rubber seal on the face of the controller and plug in the removeable LCD display to access a range of monitoring and programming functions. This display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data and any system faults. The user can also set their own charging parameters for a user-defined battery type, personalise settings for the load, charging stages and more.Programmable relay:This solar charge controller has programmable relay contacts, which can be programmed (e.g. with a smartphone, via the app) to start a generator or to send a low battery signal which will activate an audible alarm.Other features:The Victron SmartSolar MPPT 150/100 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36* / 48V selection- 2 pairs of terminals (solar panel, battery) for wires up to 35mm2- Inbuilt bluetooth- Programmable relay: AC rating: 240VAC /4A , DC rating: 4A up to 35VDC, 1A up to 60VDC- Max solar panel voltage: 150V- Max solar panel power: 1450W (12V) / 2900W (24V) / 4350W (36V) / 5800W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -48mV / -64mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: <35mA (12V) / <20mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 216 x 295 x 103 mm- Mounting dimensions: 273 x 144 mm- Weight: 4.5kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£299.99

Victron Energy SmartSolar MPPT 150/60-Tr – SCC115060211

Victron Energy SmartSolar MPPT 150/60-Tr – SCC115060211 This Victron 150V 60A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. SmartSolar MPPT controllers uniquely feature built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, along with a programmable relay with various signalling options.Ultrafast MPPT Technology:This 60A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, reverse polarity, overvoltage, overcurrent and reverse current, as well as battery overvoltage, reverse polarity and overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional LCD display:Alternatively, this SmartSolar controller features a connection area for an optional Plug-in LCD display (sold separately). Simply remove the rubber seal on the face of the controller and plug in the removeable LCD display to access a range of monitoring and programming functions. This display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data and any system faults. The user can also set their own charging parameters for a user-defined battery type, personalise settings for the load, charging stages and more.Optional control panel:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage. Programmable relay:This solar charge controller has programmable relay contacts, which can be programmed (e.g. with a smartphone, via the app) to start a generator or to send a low battery signal which will activate an audible alarm.Other features:The Victron SmartSolar MPPT 150-60 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36* / 48V selection- 2 pairs of terminals (solar panel, battery) for wires up to 35mm2- Inbuilt bluetooth- Programmable relay: AC rating: 240VAC /4A , DC rating: 4A up to 35VDC, 1A up to 60VDC- Max solar panel voltage: 150V- Max solar panel power: 860W (12V) / 1720W (24V) / 2580W (36V) / 3440W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -48mV / -64mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: <35mA (12V) / <20mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 185 x 250 x 95 mm- Weight: 3kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£44.99

Victron Energy smallBMS – BMS400100000

The smallBMS can replace the VE.Bus BMS in several applications. It is however not suitable for use with VE.Bus MultiPlus and Quattro inverter/chargers: it has no VE.Bus interface. The smallBMS has two outputs, similar to the VE.Bus BMS. Features of the smallBMS Load Disconnect outputThe Load output is normally high and becomes free floating in case of cell under voltage (default 2,8V/cell, adjustable on the battery between 2,6V and 2,8V per cell). Maximum current: 1A. The Load output is not short-circuit protected. The Load output can be used to control:• A high current relay or contactor.• The remote on/off input of a Battery Protect, inverter or DC-DC converter or other loads (a non-inverting or inverting on/off cable may be required). Pre-alarm outputThe smallBMS has a pre-alarm output is normally free floating and becomes high in case of imminent cell under voltage (default 3,1V/cell, adjustable on the battery between 2,85V and 3,15V per cell). Maximum current: 1A (not short circuit protected).The minimum delay between pre-alarm and load disconnect is 30 seconds. Charge disconnect outputThe Charger output is normally high and becomes free floating in case of imminent cell over voltage or over temperature. Maximum current: 10mA.The Charger output is not suitable to power an inductive load such as a relay coil.

...Read more View Product

£415.00

Victron Energy AGM Dual Purpose Battery 12V 220Ah – BAT412201084

The Victron Energy 12V 220Ah AGM battery has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches. Features of the 12V 220Ah AGM battery Sealed (VRLA) AGM BatteriesAGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of high currents than gel batteries. Low Self-DischargeBecause of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C.Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions. Exceptional Deep Discharge RecoveryVictron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge.Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries,Victron batteries are no exception. Battery Discharging CharacteristicsThe rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C.The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge.The effective capacity decreases with increasing discharge current. Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter. GTIN 8719076037088 Voltage 12V Battery Capacity (C20) 220Ah Cold Cranking 650CCA Terminal Type M8 Terminal Layout Side Dimensions (Including Terminals) L522 x W238 x H240mm Weight 65Kg Warranty 2 Years Country of Manufacture Vietnam Battery Technology AGM Battery Application Dual Purpose

...Read more View Product

£42.99

Victron BMS Extension Cable - 5m - Pack of 2 ASS030560500

BMS Extension Cable - 5m ASS030560500 M8 circular connector Male/Female 3 pole cable 5m (bag of 2)

...Read more View Product

Out of Stock

£445.99

Victron Energy LiFePO4 Battery 12.8V 50Ah Smart – BAT512050610

Victron Energy LiFePO4 Battery 12.8V 50Ah Smart – BAT512050610 The Victron Energy 50Ah Smart Battery With integrated cell balancing Can be parallel and series connected Bluetooth app available to monitor cell voltage and temperature Requires one of these BMS-es: VE.Bus BMS – recommended for systems with our inverter/chargers. smallBMS – recommended for use in small systems. Battery Management System BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS CL 12/100 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Lynx Smart BMS – recommended for use in large systems. Features of the 50Ah Smart Battery RuggedA lead-acid battery will fail prematurely due to sulfation:• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid.Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for demanding applications. EfficientIn several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead acid battery is 80%.The round-trip energy efficiency of a LFP battery is 92%.The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state).In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions. Size and weightSaves up to 70% in spaceSaves up to 70% in weight Expensive?LFP batteries are expensive when compared to lead acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency. BluetoothWith Bluetooth cell voltages, temperature and alarm status can be monitored.Very useful to localize a (potential) problem, such as cell imbalance. The 50Ah Smart battery is equipped with Bluetooth and uses this to communicate with the VictronConnect app. The VictronConnect app can be used for:• Monitoring the battery status• Monitoring the battery voltage• Monitoring the battery temperature• To find out when the battery was last fully charged• Monitoring the cell balancing status• Monitoring the individual cell voltages• To view or change the battery settings• To update the battery firmware Brand Victron Energy Manufacturer Part Number BAT512050610 gtin 8719076051633 Voltage 12V Battery Capacity (C20) 50Ah Terminal Type M8 Terminal Layout Right Hand Positive Dimensions (Including Terminals) H199 x W188 x D147mm Weight 7Kg Warranty 3 Years Battery Technology Lithium Battery Application Deep Cycle Country of Manufacture China

Out of Stock

£18.99

Victron MIDI-fuse 100A/32V (package of 5 pcs) (CIP132100010)

£50.00

Victron Energy Battery Balancer – BBA000100100

The Victron Energy Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries. When the charge voltage of a 24V battery system increases to more than 27V, the Battery Balancer will turn on and compare the voltage over the two series connected batteries. The Battery Balancer will draw a current of up to 1A from the battery (or parallel connected batteries) with the highest voltage. The resulting charge current differential will ensure that all batteries will converge to the same state of charge. If needed, several balancers can be paralleled.A 48V battery bank can be balanced with three Battery Balancers. LED indicators on the Battery BalancerGreen: on (battery voltage > 27,3V)Orange: lower battery leg active (deviation > 0,1V)Orange: upper battery leg active (deviation > 0,1V)Red: alarm (deviation > 0,2V). Remains on until the deviation has reduced to less than 0,14V, or until system voltage drops to less than 26,6V. Alarm relayNormally open. The alarm relay closes when the red LED switches on and opens when the red LED switches off. Alarm reset on Battery BalancerTwo terminals are available to connect a push button. Interconnecting the two terminals resets the relay.The reset condition will remain active until the alarm is over. Thereafter the relay will close again when a new alarm occurs. Even more insight and control with the midpoint monitoring function of the BMV-702 Battery MonitorThe BMV-702 measures the midpoint of a string of cells or batteries. It displays the deviation from the ideal midpoint in volts or percent.Separate deviation percentages can be set to trigger a visual/audible alarm and to close a potential free relay contact for remote alarm purposes.Please see the manual of the BMV-702 for more information about battery balancing

...Read more View Product

£563.99

Victron Energy AGM Super Cycle Battery 12V 230Ah (M8) - BAT412123081

The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches.VRLA AGM: design life 7-10 yearsFeaturesA truly innovative batteryThe AGM Super Cycle batteries are the result of recent battery electrochemistry developments.The paste of the positive plates is less sensitive to softening, even in case of repeated 100% discharge of the battery, and new additives to the electrolyte reduce sulfation in case of deep discharge.Exceptional 100% depth of discharge (DoD) performanceTests have shown that the Super Cycle battery does withstand at least three hundred 100% DoD cycles.The tests consist of a daily discharge to 10,8V with I = 0,2C20, followed by approximately two hours rest in discharged condition, and then a recharge with I = 0,2C20.The two hours rest period in discharged condition will damage most batteries within 100 cycles, but not the Super Cycle battery.We recommend the Super Cycle battery for applications where an occasional discharge to 100% DoD, or frequent discharge to 60- 80% DoD is expected.Smaller and lighterAn additional advantage of the new chemistry is a slightly smaller size and less weight compared to our standard deep cycle AGM batteries. GTIN 8719076039570 Voltage 12V Battery Capacity (C20) 230Ah Cold Cranking 700CCA Terminal Type M8 Insert Terminal Layout Side Dimensions (Including Terminals) L532 x W207 x H226mm Weight 57Kg Warranty 2 Years Country of Manufacture China Battery Technology AGM Battery Application Dual Purpose

...Read more View Product

£445.00

Victron Energy MultiPlus 24/1200/25-16 230V – PMP242120000

The new style Victron Energy MultiPlus 24/1200 Inverter Charger is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Features of the MultiPlus 24/1200 Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backupgenerator and more…” Parallel Operation and Three Phase CapabilityUp to six Multis can operate in parallel to achieve higher power output.In addition to parallel connection, three units can be configured for three-phase output PowerAssist – Boosting the Capacity of Shore or Generator PowerThis feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Want to have perfect control over your system from wherever you are whilst using your MultiPlus 24/1200, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Brand Victron Energy Manufacturer Part Number PMP242120000 GTIN 8719076039327 Voltage 24V Cont. Output Power at 25°C 1200VA Peak Power 2400W Output AC Voltage 230V Transfer Switch 16A Charge Current House Battery 25A Charge Current Starter Battery 1A Protection Category IP21 Efficiency 94% Bluetooth Compatible No Dimensions H406 x W250 x D100mm Weight 8.2Kg Warranty 5 Years Country of Manufacture China

...Read more View Product

£271.99

Victron Energy SmartShunt IP65 2000A – SHU065220050

The SmartShunt IP65 2000A is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor. Differences compared to BMV-712 Battery Monitor– No programmable visual and audible alarm– No programmable relay Why should I monitor my battery with the SmartShunt IP65 2000A?Batteries are used in a wide variety of applications, mostly to store energy for later use. But how much energy is stored in the battery? No one can tell by just looking at it. The service life of batteries depends on many factors. Battery life may be shortened by under-charging, over-charging, excessively deep discharges, excessive charge or discharge currents, and by high ambient temperature. Monitoring the battery with a battery monitor will give important feedback to the user so that remedial measures can be taken when necessary. Doing this will extend battery life and the battery monitor will quickly pay for itself. The VictronConnect appThe VictronConnect app is essential to set up and to monitor the SmartShunt IP65 2000A.The app can connect to the battery monitor via:• Bluetooth• USB, via the optional VE.Direct to USB interface The app is available for the following platforms:• Android• Apple iOS (Note that USB is not supported, it is only possible to connect via Bluetooth)• MacOs• Windows (Note that Bluetooth is not supported, it is only possible to connect via USB). The VictronConnect app can be downloaded from app stores or from the VictronConnect product page. Brand Victron Energy Manufacturer Part Number SHU065220050 GTIN 8719076057918 Protection Category IP65 Bluetooth Enabled Yes Dimensions H68 x W168 x D100mm Warranty 5 Years Country of Manufacture India

...Read more View Product

£89.99

Victron Energy CYRIX-CT 12/24V 120A Battery Combiner Kit – CYR010120110R

This Battery Combiner Kit is for adding a 2nd or 3rd battery system in your car, boat, RV or whatever you wish. It utilizes the simplest and most advanced technology to keep all your batteries charged using the engines electrical system, but isolates the starting battery when charging ceases so you never get stranded. This kit includes the Battery Combiner, cables and lugs. Brand Victron Energy Manufacturer Part Number CYR010120110R Voltage 12/24 LED Status Indication No Continuous Current 120 A Cranking Rating (5 seconds) 180 A Start Assist Yes (Cyrix remains engaged during 30 seconds) Protection Category IP54 Dimensions H46 x W46 x D80 Weight (kg) 0.11 Warranty 5 Years

...Read more View Product

£1,550.00

Victron Energy EasySolar-II 48/5000/70-50 MPPT 250/100 GX – PMP482507010

The EasySolar-II 48/5000 GX combines an MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure. The product is easy to install, with a minimum of wiring. Features of the EasySolar-II 48/5000 GX The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: A MultiPlus-II inverter/charger A SmartSolar MPPT -Tr solar charge controller A GX device with a 2 x 16-character display. These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be u sed to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device The integrated GX device on the EasySolar-II includes: A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port. A USB port An Ethernet port A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection. Control over system Want to have perfect control over your system from wherever you are whilst using your EasySolar-II 48/5000 GX, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Brand Victron Energy Manufacturer Part Number PMP482507010 GTIN 8719076049333 Voltage 48V Cont. Output Power at 25°C 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 70A Protection Category IP21 Efficiency 96% Bluetooth Compatible Yes Dimensions H604 x W323 x D253mm Weight 38.6Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£40.99

Victron Energy Smart Battery Sense Long Range 10-meters for MPPT Solar Chargers – SBS050150200

Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers. With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life. Improves battery charging By measuring voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided – guaranteeing the correct charge-voltage. For lead batteries, battery temperature data is used to adjust the charge-voltages: cold batteries require an increased charge-voltage, whereas hot batteries require a decreased charge-voltage. For lithium batteries temperature data is used to disable charging when they are too cold: charging lithium batteries near or below freezing causes permanent damage to the cells. Look no wires The connection between Smart Battery Sense and one or more Solar Charger(s) is wireless: It uses VE.Smart Network – a wireless technology based on Bluetooth Smart. Information transmitted can be used simultaneously by one, two or more Solar Chargers connected to the same 12V, 24V and 48V battery bank. The Smart Network is set up using the VictronConnect app. Tidy, simple – smart Installation is simple, quick and tidy. Just connect the unit’s two eyelets to your battery terminals and attach the Smart Battery Sense unit directly onto the battery-body using its self-adhesive strip. Brand Victron Energy Manufacturer Part Number SBS050150200 Operating Voltage Range 8-60V Cable Length 45cm Dimensions H14 x W38 x D38mm Warranty 5 Years Country of Manufacture Malaysia

...Read more View Product

Out of Stock

£1,099.00

Victron Energy Phoenix Inverter 48V 5000VA Smart – PIN482500000

The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems. It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave. Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish. Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect. Features Bluetooth built-in: fully configurable with a tablet or smartphone Low battery voltage alarm Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Alarm relay Monitoring: In- and output voltage, load and alarms VE.Direct communication port The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters. Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch. Brand Victron Energy Manufacturer Part Number PIN482500000 GTIN 8719076047940 Voltage 48V Cont. Output Power at 25°C 5000VA Peak Power 10000W Output AC Voltage 230V Protection Category IP21 Efficiency 96% Bluetooth Enabled Yes Dimensions H555 x W295 x D160mm Weight 28Kg Warranty 5 Years Country of Manufacture India

Out of Stock

£199.00

Victron Polycrystalline panel 270W-20V Poly 1640x992x35mm series 4 a SPP042702000

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

Out of Stock

£399.99

Victron Monocrystalline panel 360W-24V Mono 1956x992x40mm series 4a SPM043602400

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

Out of Stock

£274.99

Victron Monocrystalline panel 305W-20V Mono 1640x992x35mm series 4a SPM043052000

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

£92.99

Victron Energy Argodiode 140-3AC Three Batteries 140A – ARG140301020R

Diode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. The Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current the voltage drop is approximately 0,3 V and at the rated output approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator. Please see Victron Energy’s ‘Energy Unlimited’ or ask for specialist advice when installing a diode isolator. Simply inserting the isolator in the cabling between the alternator and the batteries will slightly reduce charge voltage. The result can be that batteries are not charged to the full 100% and age prematurely. Alternator energize input Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start. The new ‘AC’ diode isolators feature a special current limited energize input that will power the B+ when the engine run/stop switch is closed. Brand Victron Energy Manufacturer Part Number ARG140301020R GTIN 8719076019107 Max. Charge Current 140A Max. Alternator Current 140A Number Of Batteries 3 Alternator Energize Input Yes Connection M8 Studs Dimensions H60 x W120 x D150mm Weight 1.1Kg Warranty 5 Years

...Read more View Product

£309.00

Victron Phoenix Inverter 24/1200 230V VE.Direct UK PIN242121400

Victron Phoenix Inverter 24/1200 230V VE.Direct UK (PIN242121400) Victron Energy Phoenix Inverter 24/1200 230V VE.Direct UK Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. VE.Direct communication port The VE.Direct port can be connected to: – A computer (VE.Direct to USB interface cable needed)– Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable – Low battery voltage alarm trip and reset levels– Low battery voltage cut-off and restart levels– Dynamic cut-off: load dependent cut-off level– Output voltage 210 – 245V– Frequency 50 Hz or 60 Hz– ECO mode on/off and ECO mode sense level Monitoring – In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. LED diagnosis Please see manual for a description. To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. WEIGHT 7.4 kg DIMENSIONS 117 × 232 × 327 mm BRAND Victron Energy COLOUR Blue COUNTRY OF ORIGIN China GLOBAL IDENTIFIER (GTIN CODE) 8719076041399 INTRASTAT STATISTICAL CODE 85044084 MANUFACTURER Victron Energy QUANTITY PER MASTERBOX 4 QUANTITY PER PALLET 36 USA STATISTICAL CODE 8504.40.95-70 SKU PIN242120400 SIZE 117 x 232 x 327

...Read more View Product

£24.53

Victron Energy Orion IP67 24/12V 5A (60W) – ORI241205260

Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Orion IP67 DC-DC Converter. The casing is made of cast aluminium and the electronics are moulded in resin. Extra-long input and output cables Thanks to the cables of 1.8 meters in length, intermediate cable interconnections to increase length even more will in most cases not be needed. This is an important reliability increasing feature in an area were IP67 protection grade is needed. Wide input voltage range With 15 to 40 Volts input range, a stable output is ensured during surges or sags due to other equipment connected to same battery. Protected against overheating It can be used in a hot environment such as a machine room. Brand Victron Energy Manufacturer Part Number ORI241205260 GTIN 8719076048428 Voltage 24/12V Cont. Output Current 5A Protection Category IP67 Efficiency 93% Bluetooth Enabled No Dimensions H25 x W43 x D20mm Weight 0.05Kg Warranty 5 Years Country of Manufacture China

...Read more View Product

£190.49

Victron Energy Blue Smart IP65 Charger 12V 25A 1 Output UK – BPC122531024

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC122531024 GTIN 8719076051565 Voltage 12V Charge Current 25A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H75 x W140 x D240mm Weight 1.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£156.99

Victron Energy Blue Smart IP65 Charger 24V 8A 1 Output UK – BPC240831024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC240831024R GTIN 8719076040699 Voltage 24V Charge Current 8A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 95% Bluetooth Enabled Yes Plug Type UK Dimensions H60 x W105 x D190mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£200.75

Victron Energy Orion-Tr 48/12V 30A (360W) Isolated DC-DC Converter – ORI481240110

Remote on-offThe remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual). Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system. All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel. IP43 protectionWhen installed with the screw terminals oriented downwards. Screw terminalsNo special tools needed for installation. Input fuseOn 12V and 24V input models only. Brand Victron Energy Manufacturer Part Number ORI481240110 GTIN 8719076038870 Voltage 48/12V Cont. Output Current 30A Protection Category IP43 Efficiency 87% Bluetooth Enabled No Dimensions H130 x W186 x D80mm Weight 1.8Kg Warranty 5 Years Country of Manufacture India Datasheet Victron Orion Isolated Datasheet Installation and Help Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here Video

...Read more View Product

£52.54

Victron Polycrystalline panel 45W-12V Poly 425x668x25mm series 4a SPP040451200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£60.00

Victron Energy BlueSolar MPPT 100/15 – SCC010015200R

Victron Energy BlueSolar MPPT 100/15 – SCC010015200R A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on Victron for details Day/night timing and light dimming option See the software section on Victron for details Programming, real-time data and history display options – Color Control GX or other GX devices: see the Venus documents on our website. – A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC010015200R GTIN 8719076025337 Voltage 12/24V Rated Charge Current 15A Nominal PV Power, 12V 220W Max. PV Short Circuit Current 15A Max. PV Open Circuit Voltage 100V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H100 x W113 x D40mm Weight 0.5Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£488.99

Victron Energy SmartSolar MPPT 250V 85A Tr VE.Can – 250/85 SCC125085411

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC125085411 GTIN 8719076050896 Voltage 12/24/48V Rated Charge Current 85A Nominal PV Power, 12V 1200W Max. PV Short Circuit Current 70A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled Yes Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£452.99

Victron Energy SmartSolar MPPT 250V 70A Tr VE.Can – 250/70 SCC125070421

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC125070421 GTIN 8719076051213 Voltage 12/24/48V Rated Charge Current 70A Nominal PV power, 12V 1000W Max. PV Short Circuit Current 35A Max. PV Open Circuit Voltage 250V absolute maximum coldest conditions 245V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled Yes Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years

...Read more View Product

£404.99

Victron Energy SmartSolar MPPT 150V 70A MC4 VE.Can – 150/70 SCC115070511

Victron Energy SmartSolar MPPT 150V 70A MC4 VE.Can – 150/70 SCC115070511 The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC115070511 GTIN 8719076051114 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A (max 30A per MC4 conn.) Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H215 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£339.99

Victron Energy SmartSolar MPPT 150V 70A Tr – 150/70 SCC115070211

Victron Energy SmartSolar MPPT 150V 70A Tr – 150/70 SCC115070211 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Remote Monitoring and Control Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. Synchronized parallel charging with Bluetooth Up to 10 units can be synchronized with Bluetooth. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. Brand Victron Energy Manufacturer Part Number SCC115070211 GTIN 8719076051404 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£69.99

Victron Energy SmartSolar MPPT 100V 15A – 100/15 SCC110015060R

Victron Energy SmartSolar MPPT 100V 15A – 100/15 SCC110015060R A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on our website for details Day/night timing and light dimming option See the software section on Victron for details Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. Brand Victron Energy Manufacturer Part Number SCC110015060R GTIN 8719076040811 Voltage 12/24V Rated Charge Current 15A Nominal PV Power, 12V 220W Max. PV Short Circuit Current 15A Max. PV Open Circuit Voltage 100V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H100 x W113 x D50mm Weight 0.6Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

Out of Stock

£135.50

Victron Energy Blue Smart IP67 Charger 24V 8A 1 Output – BPC240813006

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC240813006 GTIN 8719076038276 Voltage 24V Charge Current 8A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 96% Bluetooth Enabled Yes Plug Type CEE 7/7 Dimensions H99 x W219 x D65mm Weight 2.4Kg Warranty 5 Years Country of Manufacture India

£186.00

Victron Energy Blue Smart IP67 Charger 12V 25A 1 Output UK – BPC122547026

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC122514006 GTIN 8719076041313 Voltage 12V Charge Current 25A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 95% Bluetooth Enabled Yes Plug Type UK Dimensions H99 x W219 x D65mm Weight 2.4Kg Warranty 5 Years

...Read more View Product

£42.39

Victron Batteryprotect 65A 12V/24V Battery Over Discharge Protector BPR000065400

This Victron 65A 12/24V automatic battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances. Features: Low voltage disconnect: when battery charge is low, the Battery Protect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health. Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs. Overvoltage disconnect: when battery voltage gets too high, the BatteryProtect disconnects the loads to protect them from damage. Automatic system recognition: the BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup. Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect. Remote switch and alarm connections: connect input and output relays to control the BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems. Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging. System Specifications: Nominal battery voltage: 12V / 24V Operating voltage range: 6 - 35V Maximum continuous current: 65A Peak current (30 seconds): 250A Current draw: <1.5mA active, <0.6mA during disconnect Alarm Relay: 50mA Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C) Dimensions: Dimensions: 40 x 48 x 106 mm Weight: 200g Battery Protect Advantages Automatic smart battery protectors offer protection for the discharging of your battery system, preserving your battery health and protecting appliances. Victron Energy offers a range of discharge protectors which are designed to protect a battery bank from over-discharge and extend its lifespan. The discharge protectors offer several advantages and functionality including: -Protecting the battery bank: The discharge protectors protect the battery bank from over-discharge by disconnecting the load when the battery's state of charge (SOC) reaches a certain level. This helps to extend the lifespan of the battery bank by preventing deep discharge cycles. Customizable settings : The discharge protectors have customizable settings, this allows you to set the SOC level at which the load will be disconnected, and also set the reconnection level, depending on your needs and the type of battery you are using. -Advanced monitoring and control: The discharge protectors can be connected to a network for remote monitoring and control, this allows you to monitor the status of the battery bank and adjust settings as needed. -Compatible with other victron energy product: The discharge protectors can work seamlessly with other Victron Energy products such as the Multiplus inverter/charger, and GX devices for advanced monitoring and control. -Easy installation : The discharge protectors are easy to install and they are compatible with different types of battery, you can use them with lead-acid, lithium-ion, and other types of battery. -Reliability: The discharge protectors are built with high-quality and durable components, which ensures reliable and long-lasting performance. Overall, Victron Energy discharge protectors are a useful addition to a battery bank and can help to extend its lifespan by preventing over-discharge. They are easy to install and customizable settings, compatible with different types of batteries, and allow advanced monitoring and control, which makes them suitable for a wide range of applications.

...Read more View Product

£645.00

Victron MultiPlus 2000VA - 24/2000/50-32 230V VE.Bus 24V Inverter Charger PMP242200000

The 24/2000 MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features of the MultiPlus 24/2000 Unique PowerAssist feature The MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually unlimited power thanks to parallel operation Up to 6 units can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your MultiPlus and system or systems locally (via LAN) or remotely (via the internet) from anywhere in the world, using the free VRM app and the free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your MultiPlus to auto starting a backup generator and more…” Want to have perfect control over your system from wherever you are whilst using your MultiPlus 24/2000, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Brand Victron Energy Charge Current Starter Battery 1A Warranty 5 Years Weight 15.5Kg Dimensions H506 x W236 x D147mm Bluetooth Compatible No Efficiency 94% Protection Category IP21 Charge Current House Battery 50A Manufacturer Part Number PMP242200000 Transfer Switch 35A Output AC Voltage 230V Peak Power 2800W Cont. Output Power at 25°C 2000VA Voltage 24V gtin 8719076052173

...Read more View Product

£599.00

Victron Energy MultiPlus Compact 24/1600/40-16 230V – PMP242160000

The new style Victron Energy MultiPlus 24/1600 Inverter Charger is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Features of the MultiPlus 24/1600 Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backupgenerator and more…” Parallel Operation and Three Phase CapabilityUp to six Multis can operate in parallel to achieve higher power output.In addition to parallel connection, three units can be configured for three-phase output PowerAssist – Boosting the Capacity of Shore or Generator PowerThis feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Want to have perfect control over your system from wherever you are whilst using your MultiPlus 24/1600, why not have a look at the Cerbo GX Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.

...Read more View Product

£749.00

Victron Energy Phoenix Inverter 24/3000 230V SMART PIN242300000

Victron Phoenix Inverter 24/3000 Smart (PIN242300000) – Pure Sine Wave The Victron Phoenix Inverter 24/3000 Smart is a powerful and intelligent pure sine wave inverter designed to convert 24V DC battery power into 230V AC electricity — perfect for off-grid and mobile applications where reliability is crucial. Whether you’re powering sensitive electronics in a motorhome, boat, tiny house, or solar energy system, the Phoenix 24/3000 Smart delivers dependable, clean energy exactly when and where you need it. Key Features of the Victron Phoenix Inverter 24V 3000VA Smart: Pure Sine Wave Output: Ensures stable and clean AC power, ideal for sensitive electronics like computers, LED lights, and medical devices. 3,000VA Power Capacity: Powerful enough to handle most common appliances in homes, RVs, boats, and caravans, from kitchen appliances to power tools. Bluetooth Connectivity: Fully configurable using the VictronConnect app on your smartphone or tablet. Monitor and adjust settings such as: Low battery voltage alarm Low battery cut-off/restart levels Dynamic cut-off based on load conditions Output voltage (210-245V) and frequency (50Hz or 60Hz) ECO mode on/off and sense level adjustments Alarm relay settings VE.Direct Communication Port: For advanced monitoring and configuration, the VE.Direct port can be connected to a computer using the VE.Direct to USB interface for further customisation and real-time data. Proven Reliability and Advanced Design The Victron Phoenix Inverter incorporates a full bridge plus toroidal transformer topology, providing excellent performance and proven reliability. This design makes the inverter short-circuit proof and protects it from overheating, even under heavy loads or high ambient temperatures. The high start-up power capability allows it to start demanding appliances such as power converters, LED lamps, and electric tools. ECO Mode for Energy Efficiency In ECO mode, the inverter enters standby when the load falls below a preset threshold, conserving energy by switching on only for brief periods every 2.5 seconds to check the load. When demand exceeds the threshold, the inverter remains active, ensuring efficient energy use while extending battery life. Remote On/Off and LED Diagnosis The inverter supports a remote on/off switch or relay connection for easy control from a distance. Additionally, LED diagnosis provides real-time system status, ensuring you stay informed about any system issues (refer to the manual for more details). Seamless AC Switching with Filax or MultiPlus For uninterrupted power supply, Victron recommends the Filax Automatic Transfer Switch, which ensures minimal switchover time (less than 20 milliseconds) to maintain power continuity for sensitive equipment like computers. Alternatively, use the MultiPlus inverter with its built-in transfer switch for seamless power transitions between different AC sources. Benefits of the Victron Phoenix Inverter 24/3000 Smart: Powerful and Flexible: Handles a wide range of loads, making it ideal for off-grid, mobile, or backup applications. Energy Savings: With ECO mode and dynamic cut-off features, the inverter optimises energy use, reducing costs and extending battery life. Remote Control and Monitoring: Configure and monitor the system with Bluetooth or via a computer using VE.Direct. Input voltage range: 18.6-34 VDC Output voltage: 230VAC +/- 2% Continuous AC power at 25ºC: 3000VA Continuous power at 25ºC/40ºC/65ºC: 2400/2200/1700W Peak power: 6000VA Dynamic (load dependent) DC low shut down: Fully configurable Max. efficiency: 92% No-load power consumption: 13W Default zero load power in ECO mode: 1.9W Operating temperature: -40ºC to +65ºC (fan assisted cooling) Stop & start power ECO-mode: Adjustable DC (battery) cable connection: 2+2 M8 bolts 230V AC cable connection: Screw terminals Ingress Protection rating: IP21 Weight: 19kg Overall dimensions: 485 (L) x 285(W) x 150mm (H)

...Read more View Product

£1,059.99

Victron Energy Skylla-i 24/80(1+1) 230V – SKI024080000

The Skylla-i 24/80 is a modern and powerful battery charger that withstands the rigors of an adverse environment: heat, humidity and salt air. Features of the Skylla-i 24/80 Synchronised parallel operationSeveral chargers can be synchronised with the CAN bus interface. This is achieved by simply interconnecting the chargers with RJ45 UTP-cables. Note: Two output and three output chargers cannot be paralleled with each other. The right amount of charge for a lead-acid battery: variable absorption timeWhen only shallow discharges occur the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. Preventing damage due to excessive gassing: the BatterySafe modeIf, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Skylla-i will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached. Less maintenance and aging when the battery is not in use: the Storage modeThe storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (26,4V for 24V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘refresh’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. To increase battery life: temperature compensationEvery Skylla-i comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations of battery temperature are expected. Battery voltage senseIn order to compensate for voltage loss due to cable resistance, the Skylla-i is provided with a voltage sense facility so that the battery always receives the correct charge voltage. Suitable for AC and DC supply (AC-DC and DC-DC operation)The chargers also accept a DC supply. Use as a power supplyAs a result of the perfectly stabilized output voltage, the Skylla-i 24/80 can be used as a power supply if batteries or large buffer capacitors are not available. Li-Ion (LiFePO4) readySimple charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-Ion BMS to the remote control port of the charger. Alternatively complete control of voltage and current can be achieved by connecting to the galvanically isolated CAN bus port. Learn more about batteries and battery charging To learn more about batteries and charging batteries (including the pro’s and cons of multi-bank charging and intelligent charging), please refer to Electricity on Board. The Skylla-i Control panel provides remote control and monitoring of the charge process with LED status indication. In addition, the remote panel also offers input current adjustment that can be used to limit the input current and thus the power drawn from the AC supply. This is particularly useful when operating the charger from limited shore power or small gensets. The panel can also be used to change several battery charging parameters. Several control panels can be connected to one charger or to a set of synchronised and parallel connected chargers. Want to improve battery charging? Why not take a look at the Victron Energy Battery Sense which measures voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided – guaranteeing the correct charge-voltage. Brand Victron Energy Manufacturer Part Number SKI024080000 gtin 8719076026228 Voltage 24V Charge Current 80A Input Voltage 230V Number of Outputs 1+1 Protection Category IP21 Bluetooth Enabled No Dimensions H405 x W250 x D150mm Warranty 5 Years Country of Manufacture Malaysia

...Read more View Product

£129.99

Victron Energy Phoenix Inverter 24/500 230V VE.Direct UK – PIN241501400

The Phoenix 24/500 VE.Direct inverter allows you to power domestic equipment – requiring 230V – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. This unit has the UK plug. Features of the Phoenix Inverter 24/500 VE.Direct VE.Direct communication port Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Inverter 24/500 VE.Direct are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the Phoenix Inverter 24/500 VE.Direct will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number PIN241501400 gtin 8719076056034 Voltage 24V Cont. Output Power at 25ºC 500VA Peak Power 900W Output AC Voltage 230V Efficiency 90% Protection Category IP21 Dimensions H86 x W172 x D275mm Weight 3.9Kg Warranty 5 Years Bluetooth Enabled No Plug Type UK

...Read more View Product

£275.00

Victron Energy MultiPlus 24/500/10-16 230V – PMP241500000

The new style Victron Energy MultiPlus 24/500 Inverter Charger is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Features of the MultiPlus 24/500 Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backupgenerator and more…” Parallel Operation and Three Phase CapabilityUp to six Multis can operate in parallel to achieve higher power output.In addition to parallel connection, three units can be configured for three-phase output PowerAssist – Boosting the Capacity of Shore or Generator PowerThis feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Want to have perfect control over your system from wherever you are whilst using your MultiPlus 24/500, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Brand Victron Energy Manufacturer Part Number PMP241500000 gtin 8719076046370 Voltage 24V Cont. Output Power at 25°C 500VA Peak Power 900W Output AC Voltage 230V Transfer Switch 16A Charge Current House Battery 10A Charge Current Starter Battery 1A Protection Category IP21 Efficiency 91% Bluetooth Compatible No Dimensions H311 x W182 x D100mm Weight 4.4Kg Warranty 5 Years

...Read more View Product

£886.00

Victron Energy MultiPlus Compact 24/2000/50-30 230V – CMP242200000

The MultiPlus Compact 24/2000/50-30, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features of the MultiPlus Compact 24/2000/50-30 Unique PowerAssist feature The MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities. Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backupgenerator and more… Want to have perfect control over your system from wherever you are whilst using your MultiPlus Compact 24/2000, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Brand Victron Energy Manufacturer Part Number CMP242200000 gtin 8719076037552 Voltage 24V Cont. Output Power at 25°C 2000VA Peak Power 4000W Output AC Voltage 230V Transfer Switch 30A Charge Current House Battery 50A Charge Current Starter Battery 4A Protection Category IP21 Efficiency 94% Bluetooth Compatible No Dimensions H520 x W255 x D125mm Weight 12Kg Warranty 5 Years

...Read more View Product

£666.00

Victron Energy MultiPlus Compact 24/1600 24V 1600VA - CMP241620000

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.FeaturesTwo AC OutputsThe main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).Virtually unlimited power thanks to parallel operationUp to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.Three phase capabilityIn addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.PowerControl - Dealing with limited generator, shore side or grid powerThe MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.PowerAssist - Boosting the capacity of shore or generator powerThis feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.Solar energy: AC power available even during a grid failureThe MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.System configuringIn case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).On-site Monitoring and controlSeveral options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).Remote Monitoring and controlColor Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.Remote configuringWhen connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely. GTIN 8719076022039 Voltage 24V Cont. output power at 25°C 1600VA Peak Power 3000W Output AC Voltage 230V Transfer Switch 16A Charge Current House Battery 40A Charge Current Starter Battery 4A Efficiency 94% Bluetooth Compatible No Protection Category IP21 Dimensions H375 x W214 x D110mm Weight 10Kg Warranty 5 Years

...Read more View Product

£475.00

Victron Energy MultiPlus Compact 12/800 12V 800VA - CMP128010000

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.FeaturesTwo AC OutputsThe main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).Virtually unlimited power thanks to parallel operationUp to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.Three phase capabilityIn addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.PowerControl - Dealing with limited generator, shore side or grid powerThe MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.PowerAssist - Boosting the capacity of shore or generator powerThis feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.Solar energy: AC power available even during a grid failureThe MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.System configuringIn case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).On-site Monitoring and controlSeveral options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).Remote Monitoring and controlColor Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.Remote configuringWhen connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely. GTIN 8719076022015 Voltage 12V Cont. output power at 25°C 800VA Peak Power 1600W Output AC Voltage 230V Transfer Switch 16A Charge Current House Battery 35A Charge Current Starter Battery 4A Efficiency 92% Bluetooth Compatible No Protection Category IP21 Dimensions H375 x W214 x D110mm Weight 10Kg Warranty 5 Years

...Read more View Product

£890.00

Victron MultiPlus Compact 12/2000/80-50 120V VE.Bus CMP122200100

Victron MultiPlus Compact 12/2000/80-50 120V VE.Bus (CMP122200100) Victron Multiplus Compact 12/2000/80-50 120V VE.Bus as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Models: 800VA, 1200VA, 1600VA, 2000VA, 3000VA, 5000VA Unique PowerAssist feature The MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check the datasheets to see which models have paralleling, three phase and split phase capabilities. Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backupgenerator and more… Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).Virtually unlimited power thanks to parallel operationUp to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But thats not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl Dealing with limited generator, shore side or grid powerThe MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist Boosting the capacity of shore or generator powerThis feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.Solar energy: AC power available even during a grid failureThe MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuringIn case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications). On-site Monitoring and controlSeveral options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232). Remote Monitoring and controlColor Control GX or other GX devices.Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. Remote configuringWhen connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely.

...Read more View Product

Out of Stock

£0.00

Victron MultiPlus 12/2000/80-50 120V VE.Bus PMP122200102

Victron MultiPlus 12/2000/80-50 120V VE.Bus (UL) (PMP122200102) Victron Multiplus Compact 12/2000/80-50 120V VE.Bus as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Unique PowerAssist feature The MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shoreside supply with power taken from the battery. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Three-phase or split-phase operation is also possible. Please check the datasheets to see which models have paralleling, three phase and split-phase capabilities. Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto-starting a backup generator Weight 15 kg Dimensions 62 × 33 × 22 cm Voltage 12V Inverter Rating 2000VA

£563.00

Victron Energy MultiPlus Compact 12/1200/50-16 230V – CMP121220000

The MultiPlus Compact 12/1200/50-16, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features of the MultiPlus Compact 12/1200/50-16 Unique PowerAssist feature The MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities. Remote Monitoring and Control When coupled with a GX device you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backupgenerator and more… Want to have perfect control over your system from wherever you are whilst using your MultiPlus Compact 12/1200, why not have a look at the Cerbo GXSimply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Brand Victron Energy Manufacturer Part Number CMP121220000 gtin 8719076021957 Voltage 12V Cont. Output Power at 25°C 1200VA Peak Power 2400W Output AC Voltage 230V Transfer Switch 16A Charge Current House Battery 50A Charge Current Starter Battery 4A Protection Category IP21 Efficiency 93% Bluetooth Compatible No Dimensions H375 x W214 x D110mm Weight 10Kg Warranty 5 Years

...Read more View Product

£1,690.00

Victron Energy Quattro 12/3000/120-50/50 230V – QUA123020010

Similar to the MultiPlus, the Quattro 12/3000/120-50 is also a combined inverter and charger. Additionally it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation.Features of the Quattro 12/3000-120-50Two AC Inputs & two AC OutputsThe Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.Unique PowerAssist featureThe Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.Virtually unlimited power thanks to parallel operationUp to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.Remote Monitoring and ControlWhen coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Quattro and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Quattro to auto starting a backupgenerator and more…Want to have perfect control over your system from wherever you are whilst using your Quattro 12/3000, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50.The MK3-USB allows the Quattro to connect to a computer for configuration and firmware updates. Brand Victron Energy Manufacturer Part Number QUA123020010 gtin 8719076024101 Voltage 12V Cont. Output Power at 25°C 3000VA Peak Power 6000W Output AC Voltage 230V Transfer Switch Yes Charge Current House Battery 120A Charge Current Starter Battery 4A Protection Category IP21 Efficiency 93% Bluetooth Compatible No Dimensions H362 x W258 x D218mm Weight 19Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£777.00

Victron Energy Isolation Transformer 3600W - ITR040362041

Victron Energy Isolation Transformer 3600W - ITR040362041 Indispensable in professional marine energy systems. It prevents electrolytic corrosion and above all serves as a device to guarantee a safe electric system. Toroidal wound technology for quietness and high efficiency. Soft start circuitry will ensure that the shore circuit breaker will not trip when plugged in. Features Safety and prevention of galvanic corrosion The Isolation Transformer eliminates any electrical continuity between AC shore power and the boat. It is essential for safety and eliminates the need for galvanic isolators and polarity alarms. Safety is taken for granted in case of a normal on-shore installation. A fuse will blow or a GFCI (Ground Fault Current Interrupter) will trip in case of a short circuit or current leakage to ground. Connecting the ground wire of the shore-side supply to the metal parts of the boat will result in galvanic corrosion (see below). Bringing only the live and neutral wire on board results in an unsafe situation because GFCIs will not work nor will a fuse blow in case of a short circuit to a metal part on the boat. Galvanic corrosion occurs when two dissimilar metals in electrical contact are simultaneously exposed to an electrically conducting fluid. Seawater and, to a lesser extent, fresh water are such fluids. In general, the more active alloy of the couple corrodes preferentially while the less active (more noble) material is cathodically protected. The rate of galvanic corrosion is a function of several variables including area ratios, conductivity of the fluid, temperature, nature of the materials, etc. It is a misunderstanding that galvanic corrosion occurs only in metal and aluminium hulls. In fact it can occur on any boat as soon as a metallic part (the shaft and propeller) is in contact with water. Galvanic corrosion will quickly dissolve your sacrificial anodes, and attack the shaft, propeller and other metal parts in contact with water as soon as the boat is connected to the shore-side supply. It might therefore be tempting not to connect the ground conductor: this is however extremely dangerous because GFCIs will not work nor will a fuse blow in case of a short circuit to a metal part on the boat. The best solution to avoid galvanic corrosion and at the same time prevent any unsafe situation is to install an Isolation Transformer to connect to the shore-side supply. The Isolation Transformer eliminates any electrical continuity between shore power and the boat. The shore power is fed to the primary side of the transformer and the ship is connected to the secondary. The Isolation Transformer completely isolates the boat from the shore ground. By connecting all metal parts to the neutral output on the secondary side of the transformer, a GFCI will trip or a fuse will blow in case of a short circuit. Soft start is a standard feature of a Victron Energy isolation transformer. It will prevent the shore power fuse from blowing due to the inrush current of the transformer, which would otherwise occur. Protection Category IP21 Country of Manufacture India Warranty 5 Years Weight 23Kg Manufacturer Part Number ITR040362041 Brand Victron Energy Input Circuit Breaker Yes Transformer Type Toroidal (low noise, low weight) Soft Start Yes Output 115 or 230 V Input 115 or 230 V gtin 8719076022527 Dimensions H362 x W258 x D218mm

...Read more View Product

£443.99

Victron Energy BlueSolar MPPT 250/70 Tr VE.Can – SCC125070441

Victron Energy BlueSolar MPPT 250/70 Tr VE.Can – SCC125070441 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 99%. Flexible charge algorithm Fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more BlueSolar Charge Controllers. (VE.Direct Bluetooth Smart dongle needed) VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. Brand Victron Energy Manufacturer Part Number SCC125070441 GTIN 8719076050889 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 35A Max. PV Open Circuit Voltage 150V resp. 250V absolute maximum coldest conditions, 145V resp. 245V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled No Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years

...Read more View Product

£826.99

Victron Energy Lithium SuperPack 25.6V 50Ah (M8) – BAT524050705

Victron Energy Lithium SuperPack 25.6V 50Ah (M8) – BAT524050705 The SuperPack batteries are extremely easy to install, not needing any additional components.The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. The batteries can be connected in parallel. Series connection is not allowed. Features Integrated BMS and safety switch The SuperPack batteries are extremely easy to install, needing no additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. Abuse proof A lead-acid battery will fail prematurely due to sulfation: If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged). If it is left partially charged or worse, fully discharged. A Lithium-Ion battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of Li-ion compared to lead-acid. The SuperPack batteries will cut-off the charge or discharge current when the maximum ratings are exceeded. Efficient In several applications (especially off-grid solar), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%. The round-trip energy efficiency of a Li-ion battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy are required (battery operating in 70% to 100% charged state). In contrast, a Li-ion battery will still achieve 90% efficiency even under shallow discharge conditions. Can be connected in parallel The batteries can be connected in parallel. Series connection is not allowed. Use in upright position only. Brand Victron Energy Manufacturer Part Number BAT524050705 Voltage 25.6V Battery Capacity (C20) 50Ah Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) H220 x W330 x D172mm Weight 14Kg Warranty 3 Years Battery Application Deep Cycle Battery Technology Lithium Country of Manufacture China

...Read more View Product

£373.99

Victron Energy Lithium SuperPack 12.8V 60Ah (M6) – BAT512060705

Victron Energy Lithium SuperPack 12.8V 60Ah (M6) – BAT512060705 The SuperPack batteries are extremely easy to install, not needing any additional components.The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. The batteries can be connected in parallel. Series connection is not allowed. Features Integrated BMS and safety switch The SuperPack batteries are extremely easy to install, needing no additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. Abuse proof A lead-acid battery will fail prematurely due to sulfation: If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged). If it is left partially charged or worse, fully discharged. A Lithium-Ion battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of Li-ion compared to lead-acid. The SuperPack batteries will cut-off the charge or discharge current when the maximum ratings are exceeded. Efficient In several applications (especially off-grid solar), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%. The round-trip energy efficiency of a Li-ion battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy are required (battery operating in 70% to 100% charged state). In contrast, a Li-ion battery will still achieve 90% efficiency even under shallow discharge conditions. Can be connected in parallel The batteries can be connected in parallel. Series connection is not allowed. Use in upright position only. Brand Victron Energy Manufacturer Part Number BAT512060705 gtin 8719076047544 Voltage 12.8V Battery Capacity (C20) 60Ah Terminal Type M6 Terminal Layout Left Hand Positive Dimensions (Including Terminals) H213 x W229 x D138mm Weight 9.5Kg Warranty 3 Years Battery Technology Lithium Battery Application Deep Cycle Country of Manufacture China

...Read more View Product

£749.99

Victron Energy Peak Power Pack 12.8V 40Ah – PPP012040000

The Victron Energy Peak 12.8V 40Ah Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built-in charger allowing charging from the vehicle electrical system whilst travelling with the caravan. This way the pack will be fully charged upon arrival to the camping site. If necessary, the charging is possible using the supplied adapter via a grid outlet. Charging from a solar panel is also possible. Features Peak Power Pack 12.8V 40Ah Lightweight and easy to install– Ideal for mobile applications. Effective protection against improper use– Ideal for solar power and other applications where excessive discharge might quickly cause damage to lead acid batteries. Storage mode– Reduces power consumption to almost zero. Prevents damage due to excessive discharge of the battery during storage. Remote control with status indicator – Push button (supplied) with a dual-colour LED status indicator: Short push of the button: high capacity output activated for 30 minutes (mover applications), red LED Hold down for 2 seconds: high capacity output always activated, slow flashing red LED. Hold down for 5 seconds: storage mode, blue LED flashes 10 times Battery is charged via input 1: slow flashing blue LED Battery fully charged: blue LED Overload or overheating: flashing red LED VE.Direct port: can be connected to a PC or smartphone(VE.Direct to USB or VE.Direct Bluetooth Smart dongle required) Operation: Output 1: on / 30-minute timer / off Output 2: on/off Input 1: on/off Monitoring: Battery voltage Temperature and alarms Brand Victron Energy Manufacturer Part Number PPP012040000 gtin 8719076017332 Voltage 12.8V Battery Capacity (C20) 40Ah Dimensions H172 x W190 x D172mm Weight 5.4Kg Warranty 3 Years Battery Technology Lithium Battery Application Deep Cycle Country of Manufacture India

...Read more View Product

£520.99

Victron Energy Peak Power Pack 12.8V 30Ah – PPP012030000

Victron Energy Peak Power Pack 12.8V 30Ah – PPP012030000 The Victron Energy Peak 12.8V 30Ah Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built-in charger allowing charging from the vehicle electrical system whilst travelling with the caravan. This way the pack will be fully charged upon arrival to the camping site. If necessary, the charging is possible using the supplied adapter via a grid outlet. Charging from a solar panel is also possible. Features Peak Power Pack 12.8V 30Ah Lightweight and easy to install– Ideal for mobile applications. Effective protection against improper use– Ideal for solar power and other applications where excessive discharge might quickly cause damage to lead acid batteries. Storage mode– Reduces power consumption to almost zero. Prevents damage due to excessive discharge of the battery during storage. Remote control with status indicator – Push button (supplied) with a dual-colour LED status indicator: Short push of the button: high capacity output activated for 30 minutes (mover applications), red LED Hold down for 2 seconds: high capacity output always activated, slow flashing red LED. Hold down for 5 seconds: storage mode, blue LED flashes 10 times Battery is charged via input 1: slow flashing blue LED Battery fully charged: blue LED Overload or overheating: flashing red LED VE.Direct port: can be connected to a PC or smartphone(VE.Direct to USB or VE.Direct Bluetooth Smart dongle required) Operation: Output 1: on / 30-minute timer / off Output 2: on/off Input 1: on/off Monitoring: Battery voltage Temperature and alarms Brand Victron Energy Manufacturer Part Number PPP012030000 gtin 8719076017325 Voltage 12.8V Battery Capacity (C20) 30Ah Dimensions (Including Terminals) H132 x W190 x D172mm Weight 3.8Kg Warranty 3 Years Battery Technology Lithium Country of Manufacture India

...Read more View Product

£399.00

Victron Energy Peak Power Pack 12.8V 20Ah – PPP012020000

The Victron Energy Peak 12.8V 20Ah Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built-in charger allowing charging from the vehicle electrical system whilst travelling with the caravan. This way the pack will be fully charged upon arrival to the camping site. If necessary, the charging is possible using the supplied adapter via a grid outlet. Charging from a solar panel is also possible. Features Peak Power Pack 12.8V 20Ah Lightweight and easy to install– Ideal for mobile applications. Effective protection against improper use– Ideal for solar power and other applications where excessive discharge might quickly cause damage to lead acid batteries. Storage mode– Reduces power consumption to almost zero. Prevents damage due to excessive discharge of the battery during storage. Remote control with status indicator – Push button (supplied) with a dual-colour LED status indicator: Short push of the button: high capacity output activated for 30 minutes (mover applications), red LED Hold down for 2 seconds: high capacity output always activated, slow flashing red LED. Hold down for 5 seconds: storage mode, blue LED flashes 10 times Battery is charged via input 1: slow flashing blue LED Battery fully charged: blue LED Overload or overheating: flashing red LED VE.Direct port: can be connected to a PC or smartphone(VE.Direct to USB or VE.Direct Bluetooth Smart dongle required) Operation: Output 1: on / 30-minute timer / off Output 2: on/off Input 1: on/off Monitoring: Battery voltage Temperature and alarms Brand Victron Energy Manufacturer Part Number PPP012020000 gtin 8719076017318 Voltage 12.8V Battery Capacity (C20) 20Ah Dimensions (Including Terminals) H132 x W190 x D172mm Weight 3.8Kg Warranty 3 Years Battery Technology Lithium Country of Manufacture India

...Read more View Product

Out of Stock

£2,199.99

Victron Energy LiFePO4 Battery 25,6V 200Ah Smart-A - BAT524120610

Victron Energy LiFePO4 Battery 25,6V 200Ah Smart-A - BAT524120610 The Victron Energy 25.6V 200Ah Smart Battery With integrated cell balancing Can be parallel and series connected Bluetooth app available to monitor cell voltage and temperature Requires one of these BMS-es: VE.Bus BMS – recommended for systems with our inverter/chargers. smallBMS – recommended for use in small systems. Battery Management System BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS CL 12/100 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Lynx Smart BMS – recommended for use in large systems. Features of the 25.6V 200Ah Smart Battery RuggedA lead-acid battery will fail prematurely due to sulfation:• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid.Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for demanding applications. EfficientIn several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead acid battery is 80%.The round-trip energy efficiency of a LFP battery is 92%.The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state).In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions. Size and weightSaves up to 70% in spaceSaves up to 70% in weight Expensive?LFP batteries are expensive when compared to lead acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency. BluetoothWith Bluetooth cell voltages, temperature and alarm status can be monitored.Very useful to localize a (potential) problem, such as cell imbalance. The 25.6V 200Ah Smart battery is equipped with Bluetooth and uses this to communicate with the VictronConnect app. The VictronConnect app can be used for:• Monitoring the battery status• Monitoring the battery voltage• Monitoring the battery temperature• To find out when the battery was last fully charged• Monitoring the cell balancing status• Monitoring the individual cell voltages• To view or change the battery settings• To update the battery firmware Brand Victron Energy Manufacturer Part Number BAT524120610 gtin 8719076054610 Voltage 25,6V Battery Capacity (C20) 200Ah Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) H237 x W650 x D163mm Weight 39Kg Warranty 3 Years Battery Technology Lithium Battery Application Deep Cycle Country of Manufacture China

£1,609.99

Victron Energy LiFePO4 Battery 25.6V 100Ah Smart – BAT524110610

Victron Energy LiFePO4 Battery 25.6V 100Ah Smart – BAT524110610 The Victron Energy 25.6V 100Ah Smart Battery With integrated cell balancing Can be parallel and series connected Bluetooth app available to monitor cell voltage and temperature Requires one of these BMS-es: VE.Bus BMS – recommended for systems with our inverter/chargers. smallBMS – recommended for use in small systems. Battery Management System BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS CL 12/100 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Lynx Smart BMS – recommended for use in large systems. Features of the 25.6V 100Ah Smart Battery RuggedA lead-acid battery will fail prematurely due to sulfation:• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid.Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for demanding applications. EfficientIn several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead acid battery is 80%.The round-trip energy efficiency of a LFP battery is 92%.The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state).In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions. Size and weightSaves up to 70% in spaceSaves up to 70% in weight Expensive?LFP batteries are expensive when compared to lead acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability, and excellent efficiency. BluetoothWith Bluetooth cell voltages, temperature and alarm status can be monitored.Very useful to localize a (potential) problem, such as cell imbalance. The 25.6V 100Ah Smart battery is equipped with Bluetooth and uses this to communicate with the VictronConnect app. The VictronConnect app can be used for:• Monitoring the battery status• Monitoring the battery voltage• Monitoring the battery temperature• To find out when the battery was last fully charged• Monitoring the cell balancing status• Monitoring the individual cell voltages• To view or change the battery settings• To update the battery firmware Brand Victron Energy Manufacturer Part Number BAT524110610 gtin 8719076054627 Voltage 25,6V Battery Capacity (C20) 100Ah Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) H197 x W650 x D163mm Weight 28Kg Warranty 3 Years Country of Manufacture China Battery Technology Lithium Battery Application Deep Cycle

...Read more View Product

£2,450.00

Victron Energy Quattro 12/5000 12V 5000VA - QUA125020000

Similar to the MultiPlus, the Quattro 12/5000/220-100 is also a combined inverter and charger. Additionally it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation. Features of the Quattro 12/5000-220-100 Two AC Inputs & two AC Outputs The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output. Unique PowerAssist feature The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Virtually unlimited power thanks to parallel operation Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities. Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Quattro and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Quattro to auto starting a backupgenerator and more… Want to have perfect control over your system from wherever you are whilst using your Quattro 12/5000, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. The MK3-USB allows the Quattro to connect to a computer for configuration and firmware updates. Brand Victron Energy Manufacturer Part Number QUA125020000 GTIN 8719076024118 Voltage 12V Cont. Output Power at 25°C 5000VA Peak Power 10000W Output AC Voltage 230V Transfer Switch Yes Charge Current House Battery 220A Charge Current Starter Battery 4A Protection Category IP21 Efficiency 94% Bluetooth Compatible No Dimensions H470 x W350 x D280mm Weight 34Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£1,037.99

Victron Energy Lithium SuperPack 12.8V 200Ah (M8) – BAT512120705

The SuperPack batteries are extremely easy to install, not needing any additional components.The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. The batteries can be connected in parallel. Series connection is not allowed. Features Integrated BMS and safety switch The SuperPack batteries are extremely easy to install, needing no additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. Abuse proof A lead-acid battery will fail prematurely due to sulfation: If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged). If it is left partially charged or worse, fully discharged. A Lithium-Ion battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of Li-ion compared to lead-acid. The SuperPack batteries will cut-off the charge or discharge current when the maximum ratings are exceeded. Efficient In several applications (especially off-grid solar), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%. The round-trip energy efficiency of a Li-ion battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy are required (battery operating in 70% to 100% charged state). In contrast, a Li-ion battery will still achieve 90% efficiency even under shallow discharge conditions. Can be connected in parallel The batteries can be connected in parallel. Series connection is not allowed. Use in upright position only. Brand Victron Energy Manufacturer Part Number BAT512120705 GTIN 8719076047568 Voltage 12.8V Battery Capacity (C20) 200Ah Terminal Type M8 Terminal Layout Side Dimensions (Including Terminals) H208 x W520 x D269mm Weight 21Kg Warranty 3 Years Battery Application Deep Cycle Battery Technology Lithium Country of Manufacture China

...Read more View Product

£545.99

Victron Energy Ekrano GX BPP900480100

Victron Energy Ekrano GX BPP900480100 The Victron Energy Ekrano GX is a fully encapsulated all-in-one system consisting of a GX device and a waterproof 7” display. Perfectly suited for installation in demanding environments such as ships. Higher processing power (up to 25 VE.Direct devices possible!) and perfect protection from the elements make the Ekrano the perfect choice for installations where nothing should be left to chance and the electronics must be particularly well protected. The elimination of the HDMI connection between the computer and the screen also eliminates another source of error. The same screen is installed as in the GX Touch 70, with a 7-inch screen diagonal. For installations in public spaces, the touchscreen can be disabled so that information can be displayed without allowing manipulation by the audience. Compared to a Cerbo GX in combination with a GX Touch 70, the Victron Ekrano GX is also a very interesting package in terms of price. Communication Center This GX communication center allows you to always have perfect control over your system from any location and to maximize its performance. Easily access your system via our Victron Remote Management (VRM) portal, or access your system directly using the integrated touch screen, a multifunction display (MFD) or the VictronConnect app. Wireless sensors, e.g. from RUUVI or MOPEKA, can also be read out via one (or more!) USB Bluetooth adapters. Remote Console on the VRM Monitoring, controlling and configuring the Victron Energy Ekrano GX remotely, via the internet. Just as if you were standing in front of the device, with Remote Console. The same functionality is also available in the local area network LAN or via the WLAN access point of the Ekrano GX. Perfect monitoring & control Instantly monitor battery state of charge, power consumption, PV, generator and grid energy production or check tank levels and temperature readings. Easily control the current limit for shore power, the (automatic) start/stop generator(s) or change any settings to optimize the system. Follow-up on alerts, perform diagnostic reviews, and troubleshoot complications remotely. With the integrated 7-inch touchscreen, you can get an overview of your system and adjust settings in no time at all. Its slim, waterproof design offers a lot of flexibility in creating a clean and uncluttered dashboard. Touch functionality can be disabled (or enabled) via a recessed button on the back to prevent unauthorized use. Easy assembly and configuration The Ekrano GX is particularly easy to assemble thanks to the combination of computer and touchscreen in one device. Its integrated touchscreen is waterproof, so it can also be installed outdoors. Bluetooth functionality allows for quick connection and configuration via the VictronConnect app (available for Android, iOS, Windows and Mac OS). The device is optimized for flush installation in control panels and is supplied with the necessary mounting material. Bolt-on terminal blocks keep everything securely in place. GTIN 8719076058038 Bluetooth Yes Wifi Yes Dimensions H124 x W187 x D29.8mm Warranty 5 Years

...Read more View Product

£261.99

VICTRON ENERGY AGM SUPER CYCLE BATTERY 12V 100AH (M6) – BAT412110081

The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches. VRLA AGM: design life 7-10 years Features A truly innovative battery The AGM Super Cycle batteries are the result of recent battery electrochemistry developments. The paste of the positive plates is less sensitive to softening, even in case of repeated 100% discharge of the battery, and new additives to the electrolyte reduce sulfation in case of deep discharge. Exceptional 100% depth of discharge (DoD) performance Tests have shown that the Super Cycle battery does withstand at least three hundred 100% DoD cycles. The tests consist of a daily discharge to 10,8V with I = 0,2C20, followed by approximately two hours rest in discharged condition, and then a recharge with I = 0,2C20. The two hours rest period in discharged condition will damage most batteries within 100 cycles, but not the Super Cycle battery. We recommend the Super Cycle battery for applications where an occasional discharge to 100% DoD, or frequent discharge to 60- 80% DoD is expected. Smaller and lighter An additional advantage of the new chemistry is a slightly smaller size and less weight compared to our standard deep cycle AGM batteries. Low internal resistance The internal resistance is also slightly lower compared to our standard deep cycle AGM batteries Brand Victron Energy Manufacturer Part Number BAT412110081 Voltage 12 Capacity (C20) 100 Cold Cranking (EN) 500 Terminal Type M6 Insert Terminal Layout LH+ Dimensions (Including Terminals) L260 x W168 x H215mm Weight (kg) 26 Battery Technology AGM Battery Application Super Cycle Warranty 2 Years

...Read more View Product

£849.99

Victron Energy Lynx Smart BMS 500 – LYN034160200

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. Its main features are: Built-in 500A contactor, used as a fall-back safety mechanism and also available as a remote controllable main systems switch Battery monitor, indicating state of charge percentage and more data. Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell. Bluetooth for use with the VictronConnect App for setup and monitoring. Local and remote monitoring using a Victron GX device, for example the Cerbo GX. The Lynx Smart BMS is part of the modular Lynx Distribution system. Brand Victron Energy Manufacturer Part Number LYN034160200 GTIN 8719076047476 Protection Category IP22 Bluetooth Enabled Yes Dimensions H190 x W180 x D80mm Weight 1.9Kg Warranty 5 Years

...Read more View Product

£222.25

Victron Energy SmartShunt IP65 1000A – SHU065210050

The SmartShunt IP65 1000A is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor. Differences compared to BMV-712 Battery Monitor– No programmable visual and audible alarm– No programmable relay Why should I monitor my battery with the SmartShunt IP65 1000A?Batteries are used in a wide variety of applications, mostly to store energy for later use. But how much energy is stored in the battery? No one can tell by just looking at it. The service life of batteries depends on many factors. Battery life may be shortened by under-charging, over-charging, excessively deep discharges, excessive charge or discharge currents, and by high ambient temperature. Monitoring the battery with a battery monitor will give important feedback to the user so that remedial measures can be taken when necessary. Doing this will extend battery life and the battery monitor will quickly pay for itself. The VictronConnect appThe VictronConnect app is essential to set up and to monitor the SmartShunt IP65 1000A.The app can connect to the battery monitor via:• Bluetooth• USB, via the optional VE Interface The app is available for the following platforms:• Android• Apple iOS (Note that USB is not supported, it is only possible to connect via Bluetooth)• MacOs• Windows (Note that Bluetooth is not supported, it is only possible to connect via USB). The VictronConnect app can be downloaded from app stores or from the VictronConnect product page. Brand Victron Energy Manufacturer Part Number SHU065210050 GTIN 8719076057901 Protection Category IP65 Bluetooth Enabled Yes Dimensions H68 x W168 x D75mm Country of Manufacture India Warranty 5 Years

...Read more View Product

Out of Stock

£295.00

Victron Solar Panel 360W-24V Mono 1980x1002x40mm series 4b SPM043602402

The Victron 360W Monocrystalline Solar Panel is the perfect addition to any off-grid application. They are pre-wired with MC4 connectors, making for easy installation. Their sturdy, anodized aluminium frame allows the solar panels to be easily roof-mounted with a variety of standard mounting systems. 360W solar panel Monocrystalline structure Perfect for boats and campervans Rigid construction GTIN 8719076057789 Voltage 24V Nominal Power 360W Cell Type Monocrystalline Number of Cells in Series 72 Maximum System Voltage 1000V Dimensions L1980 x W1002 x D40mm Weight 23Kg Warranty 5 Years Country of Manufacture China

£1,922.00

Victron Energy Inverter RS 48/6000 230V Smart Solar – PIN482601000

The Inverter RS 48/6000 230V Smart Solar is a combination of a powerful 48VDC, 6kVA 230VAC inverter and a high voltage, 80-450VDC, 4kW MPPT solar charger. Thanks to its modern design and high frequency technology the inverter only weighs 11kg and has an excellent efficiency, low standby power, and very quiet operation. The inverter is equipped with a display to read out battery, inverter, and solar charger details. These parameters can also be read out via Bluetooth by the VictronConnect app. In addition to this, the inverter has a VE.Can Port for connection to a GX device for system monitoring; and VE.Direct port for connection to a GlobalLink 520. Features of the RS 48/6000 230V Smart Solar Off-Grid solar inverter The Inverter RS Smart Solar 48/6000 is a 48V 6kVA Inverter with 450VDC 4kWp PV input. It is used in off-grid solar applications where AC power is required. Combination of an inverter, bi-directional DC-DC converter and MPPT The inverter produces a perfect sine wave, able to supply high powered appliances. It is supplied by a bi-directional DC-DC converter, that can either charge the battery when excess solar power is available or convert from the battery when it is needed. Wide MPPT voltage range 80 – 450VDC, with a 120VDC PV startup voltage. Light weight, efficient and quiet Thanks to high frequency technology and a new design this powerful inverter weighs only 11kg. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation. Display and Bluetooth The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Bluetooth enabled device. In addition, Bluetooth can be used to set up the system and to change settings with VictronConnect. VE.Can and VE.Direct port For connection to a GX device for system monitoring, data logging, and remote firmware updates of the RS 48/6000 Smart Solar. Built in PV isolator Both parallel PV strings connected to the MC4 plugs can be safely isolated with the large built-in switch on the bottom of the unit. I/O Connections Programmable Relay, temperature sensor and voltage sensor connections. The remote input can also be configured to accept the Victron smallBMS. Control over system Want to have perfect control over your system from wherever you are whilst using your Inverter RS 48/6000 Smart Solar, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Brand Victron Energy Manufacturer Part Number PIN482601000 GTIN 8719076048176 Voltage 48V Cont. Output Power at 25°C 6000VA Peak Power 9 kW for 3 seconds Output AC Voltage 230V Protection Category IP21 Bluetooth Enabled Yes Dimensions H425 x W440 x D125mm Weight 11Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

Out of Stock

£233.03

Victron Polycrystalline panel 330W-24V Poly 1956x992x40mm series 4a SPP043302400

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

£353.69

Victron Energy Lynx Shunt VE.Can – LYN040102100

The Lynx Shunt VE.Can is an intelligent 1000A shunt with locations for fuses (not included), the built-in battery monitor accurately monitors the state of charge of your battery. Use a GX device (e.g. Cerbo GX) for reading out the information. Part of the modular Lynx distribution system. Brand Victron Energy Manufacturer Part Number LYN040102100 GTIN 8719076022602 Protection Category IP22 Dimensions H166.5 x W181.8 x D81mm Weight 1.4Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£980.99

Victron Energy LiFePO4 Battery 12.8V 160Ah Smart – BAT512116610

Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery therefore consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series. Features Rugged A lead-acid battery will fail prematurely due to sulfation: If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged). If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime). A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid. Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for demanding applications. Efficient In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average leadacid battery is 80%. The round-trip energy efficiency of a LFP battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state). In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions. Size and weight Saves up to 70% in space Saves up to 70% in weight Expensive? LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency. Bluetooth With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance. BMS Our LFP batteries have integrated cell balancing and cell monitoring. Up to 5 batteries can be paralleled and up to four 12V batteries or two 24V batteries can be series connected, so that a 48V battery bank of up to 1500Ah can be assembled. The cell balancing/monitoring cables can be daisy-chained and must be connected to a Battery Management System (BMS). Brand Victron Energy Manufacturer Part Number BAT512116610 GTIN 8719076048930 Voltage 12.8V Battery Capacity (C20) 160Ah Terminal Type M10 Terminal Layout Right Hand Positive Dimensions (Including Terminals) H237 x W321 x D152mm Weight 33Kg Warranty 3 Years Country of Manufacture China Battery Technology Lithium Battery Application Deep Cycle

...Read more View Product

£166.99

Victron BMV-702 Precision Battery monitor 9-90VDC - BAM010702000

Victron BMV-702 Precision Battery monitor 9-90VDC Battery ‘fuel gauge’, time-to-go indicator, and much more The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account. Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts. The BMV-702 features an additional input which can be programmed to measure the voltage (of a second battery), temperature or midpoint voltage (see below). Easy to install All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance; a securing ring for the rear mounting and screws for the front mounting. Easy to program A quick install menu and a detailed setup menu with scrolling texts assists the user when going through the various settings. Please consult the manual for details. New: midpoint voltage monitoring (BMV-702 only) This feature which is often used in industry to monitor large and expensive battery banks, is now for the first time made available at a low cost, to monitor any battery bank. A battery bank consists of a string of series connected cells. The midpoint voltage is the voltage halfway along the string. Ideally, the midpoint voltage would be exactly half of the total voltage. In practice, however, deviations will be seen, dependent on many factors such as a different state of charge for new batteries or cells, different temperatures, internal leakage currents, capacities and much more. Large or increasing deviation of the midpoint voltage, points to improper battery care or a failed battery or cell. Corrective action following a midpoint voltage alarm can prevent severe damage to an expensive battery. Please consult the BMV manual for more information. Standard features Battery voltage, current, power, ampere-hours consumed and state of charge Time to go at the current rate of discharge Programmable visual and audible alarm Programmable relay, to turn off non critical loads or to run a generator when needed. 500 Amp quick connect shunt and connection kit Shunt selection capability up to 10.000 Amps VE.Direct communication port Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health Wide input voltage range: 9,5 – 95 V High current measurement resolution: 10 mA (0,01A) Low current consumption: 2,9 Ah per month (4 mA) @12V and 2,2 Ah per month (3mA) @ 24V BMV-702 additional features Additional input to measure voltage (of a second battery), temperature or midpoint voltage, andcorresponding alarm and relay settings. Installation: Flush mountFront: 63 mm diameterFront bezel: 69 x 69 mm (2.7 x 2.7 inch)Body diameter: 52mm (2.0 inch)Body depth: 31mm (1.2 inch) Shunt (included): 500 A / 50 mVCables (included): 10 meter 6 core UTP with RJ12 connectors, and cable with fuse for ‘+’ connection

...Read more View Product

£212.39

Victron Energy Blue Smart IP65 Charger 24V 13A 1 Output UK – BPC241331024

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC241331024 GTIN 8719076051589 Voltage 24V Charge Current 13A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 95% Bluetooth Enabled Yes Plug Type UK Dimensions H75 x W140 x D240mm Weight 1.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£117.56

Victron Energy Blue Smart IP65 Charger 12V 7A 1 Output UK – BPC120731024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC120731024R GTIN 8719076039747 Voltage 12V Charge Current 7A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H47 x W95 x D190mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£81.48

Victron Energy Blue Smart IP65s Charger 12V 4A 1 Output UK – BPC120433024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC120433024R GTIN 8719076044604 Voltage 12V Charge Current 4A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H45 x W81 x D182mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£1,541.99

Victron Energy Inverter RS 48V 6000VA Smart – PIN482600000

The Inverter RS Smart is a powerful 48 VDC, 6 kVA 230 VAC inverter. It features a modern design and high frequency technology, weighing only 11kg and has excellent efficiency, low standby power, and very quiet operation. The inverter is equipped with a display to read out battery and inverter details. These parameters can also be read out via Bluetooth by the VictronConnect app. In addition to this, the inverter has a VE.Can Port, for connection to a GX device for system monitoring. Features Light weight, efficient and quiet Thanks to high frequency technology and a new design this powerful inverter weighs only 11kg. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation. Display and Bluetooth The display reads battery and inverter parameters. The same parameters can be accessed with a smartphone or other Bluetooth enabled device. In addition, Bluetooth can be used to set up the system and to change settings with VictronConnect. VE.Can and VE.Direct port For connection to a GX device for system monitoring, data logging, and remote firmware updates. I/O Connections Programmable Relay, temperature sensor and voltage sensor connections. The remote input can also be configured to accept the Victron smallBMS. Brand Victron Energy Manufacturer Part Number PIN482600000 GTIN 8719076046059 Voltage 48V Cont. Output Power at 25°C 6000VA Peak Power 9kW for 3 seconds Output AC Voltage 230V Protection Category IP21 Bluetooth Enabled Yes Dimensions H425 x W440 x D125mm Weight 11Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£1,254.00

Victron Energy Phoenix Inverter 48V 5000VA VE.Bus – PIN485020000

Pure sine wave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds. SinusMax – Superior engineeringDeveloped for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem free, to any load. Parallel and 3-phase operation capabilityUp to 6 Phoenix Inverters can operate in parallel to achieve higher power output. Six 24 V 5000 VA units, for example, will provide 24 kW / 30 kVA output power. Operation in 3-phase configuration is also possible. Features SinusMax – Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. Virtually unlimited power thanks to parallel and 3-phase operation capability Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible. To transfer the load to another AC source: the automatic transfer switch If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds). Communications interface These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control. Brand Victron Energy Manufacturer Part Number PIN485020000 GTIN 8719076023883 Voltage 48V Cont. Output Power at 25°C 5000VA Peak Power 10000W Output AC Voltage 230V Protection Category IP21 Efficiency 95% Bluetooth Enabled No Dimensions H444 x W328 x D240mm Weight 30Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£1,710.00

VICTRON ENERGY MULTIPLUS 24/5000/120-100 VE.BUS – PMP245021010

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications). On-site Monitoring and control Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232). Remote Monitoring and control Color Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. Remote configuring When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely Brand Victron Energy Manufacturer Part Number PMP245021010 GTIN 8719076024033 PowerControl/PowerAssist Yes Transfer Switch 100A Cont. Output Power at 25°C 5000VA Peak power 10000W Maximum efficiency 94% Zero load power 30W Charge Current House Battery 120A Charge Current Starter Battery 4A (12V and 24V models only) Battery Temperature Sensor Yes Programmable Relay Yes VE.Bus Communication Port For parallel and three phase operation, remote monitoring and system integration Remote on-off Yes Protection Category IP21 Battery-Connection Four M8 bolts (2 plus and 2 minus connections) Dimensions H444 x W328 x D240mm Weight 30Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£88.36

Victron Polycrystalline panel 90W-12V Poly 780x668x30mm series 4a SPP040901200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£38.54

Victron Polycrystalline panel 30W-12V Poly 665x350x25mm series 4a SPP040301200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£36.47

Victron Monocrystalline panel 20W-12V Mono 440x350x25mm series 4a SPM040201200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£1,310.00

Victron Energy Phoenix Inverter 24V 5000VA VE.Bus - PIN245020000

Pure sine wave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds. SinusMax – Superior engineeringDeveloped for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem free, to any load. Parallel and 3-phase operation capabilityUp to 6 Phoenix Inverters can operate in parallel to achieve higher power output. Six 24 V 5000 VA units, for example, will provide 24 kW / 30 kVA output power. Operation in 3-phase configuration is also possible. Features SinusMax – Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. Virtually unlimited power thanks to parallel and 3-phase operation capability Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible. To transfer the load to another AC source: the automatic transfer switch If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds). Communications interface These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control. Brand Victron Energy Manufacturer Part Number PIN245020000 GTIN 8719076023760 Voltage 24V Cont. Output Power at 25°C 5000VA Peak Power 10000W Output AC Voltage 230V Protection Category IP21 Efficiency 94% Bluetooth Enabled No Dimensions H444 x W328 x D240mm Weight 30Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£402.00

Victron Energy Color Control GX – BPP010300100R

The Color Control GX is the communication-centre of your installation. It offers at-a-glance live information, and lets you control all products connected to it. Full system control is gained – almost anywhere in the world – by accessing your Color Control GX using our free-to-use Victron Remote Management Portal Intuitive system overview – all you need to know At a single touch, Color Control GX provides an instant overview of your system: battery state of charge; present power consumption; power harvest from PV; power provision from mains/generator. The full power of Victron Remote Management Victron Remote Management (VRM) provides you with full access to the very extensive controls and settings of all system-components which are connected to either your CCGX or Venus GX. It allows remote user and installer login – from anywhere, at anytime. This powerful application also provides for hassle-free diagnostic checks and analysis of archived information. Automatic Generator start/stop The Color Control GX can be programmed to auto-start your generator – triggered by low-voltage; high-demand; or battery state of charge. It can be further tailored to delay ignition until the end of ‘quiet’ periods – avoiding accidental nuisance at dead of night. Remote Console – control everything from anywhere… A Remote Console feature is available. It’s like carrying the front face of your CCGX control panel around on your phone, or other device. Energy Storage Systems – 24 hour Monitoring The Color Control GX manages Energy Storage Systems. It keeps back-up batteries at 100% ; kicks-in during power-cuts; and diverts excess (solar) power to self-consumption – saving you money. For examples and more detailed information see the ESS (Energy Storage System) manual. Remotely monitor your boat or motorhome electrics Planning a trip? Remote monitoring of your Color Control GX allows you to make sure your boat or motorhome are ready to go. Color Control GX also allows you to talk to connected equipment from other manufacturers. Brand Victron Energy Manufacturer Part Number BPP010300100R Power Supply Voltage Range 8-70 V DC Dimensions H130 x W120 x D28mm Weight (kg) 0.3 Warranty 5 Years Country of Manufacture Hungary

...Read more View Product

£360.00

Victron Energy Phoenix Inverter Compact 12V 1200VA VE.Bus – CIN121220000

The Phoenix Inverter Compact is a pure sine wave inverter with a high efficiency. It is developed for professional duty and suitable for the wide range of applications.The Phoenix Inverters Compact is available from 1200VA up to 2000VA in 12V or 24V. Features SinusMax – Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. Virtually unlimited power thanks to parallel and 3-phase operation capability Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible. To transfer the load to another AC source: the automatic transfer switch If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds). Communications interface These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control. Brand Victron Energy Manufacturer Part Number CIN121220000 GTIN 8719076021629 Voltage 12V Cont. Output Power at 25°C 1200VA Peak Power 2400W Output AC Voltage 230V Protection Category IP21 Efficiency 92% Bluetooth Enabled No Dimensions H375 x W214 x D110mm Weight 10Kg Warranty 5 Years

...Read more View Product

£264.89

Victron 2000A 12V/24V/48V Battery Monitoring Smartshunt With Bluetooth - SHU050220050

The Victron Smart Shunt is the perfect solution for monitoring and managing your battery system. With its advanced technology and user-friendly design, the Smart Shunt is a reliable and efficient way to ensure that your battery is always performing at its best. The Smart Shunt is designed to accurately measure the current flowing in and out of your battery and can be easily connected to any battery system. This allows you to monitor the state of your battery in real-time, and make sure that it is always charged and ready to go. In addition to its monitoring capabilities, the Smart Shunt also has a number of advanced features that make it even more useful. For example, it has an integrated Bluetooth module that allows you to connect to your smartphone or tablet, so you can access all of the data and settings from the Smart Shunt on your mobile device. The Smart Shunt also includes a built-in relay that can be used to control other devices, such as a generator or an inverter. This means that you can use the Smart Shunt to automatically start or stop other devices, depending on the state of your battery. Overall, the Victron Smart Shunt is a powerful and versatile tool that can help you better manage your battery system. Whether you're a professional or a hobbyist, the Smart Shunt is the perfect choice for anyone looking to improve the performance and reliability of their battery system. This Victron 2000A VS series SmartShunt uses a high-precision battery shunt designed to expertly measure vital charging and performance data for your batteries. This smart model features additional advanced functions such as Bluetooth communication ability, a secondary input for optional monitoring of an auxiliary battery bank, and an extremely low current draw from the battery bank (0.7Ah per month for a 12V system). Statistics such as battery voltage, charge / discharge current as energy flows in to and out of the battery, Amp Hours consumed, state of charge and time-to-go can be viewed and the settings can be programmed using the inbuilt Bluetooth via any Bluetooth-enabled mobile device, such as a smartphone or tablet. Battery data The SmartShunt measures the vital parameters relating to the battery condition and the energy it receives / provides, and transmits this information via Bluetooth, where it can be viewed by the user (and where some settings can be amended if necessary). This information includes: Battery voltage: Displayed for the main battery / battery bank, and also for an optional auxiliary battery which can be connected via the secondary input. Battery midpoint voltage monitoring: For battery banks constructed of several individual batteries, the SmartShunt is able to maintain balance by taking the voltage measurements from the midpoint within the bank, and if the voltage deviates from this point of balance, an alarm will be generated. For such battery banks, the voltage value is also displayed for the battery bank as a whole, and additionally, for the 'top section' and 'bottom section' (i.e. 1st half and 2nd half) of the battery bank. Battery state of charge: Indicated as a percentage value from 0-100%. Battery charging / discharging current and power: The current (A) and power (W) flowing out of the battery (load consumption) are displayed as negative values, while the current and power flowing into the battery are displayed as positive values. Battery temperature: The SmartShunt can be connected to an optional Victron battery temperature sensor (sold separately). This temperature measurement can be used to adjust available battery capacity as the temperature varies. An alarm will be activated when battery temperature falls outside of the safe range. Amp hours consumed: For example, if 12A is drawn from a fully charged battery during a period of 3 hours, the app will show -36.0Ah consumed by the battery. Time-to-go: The SmartShunt is able to estimate the approximate length of time that the battery will continue to support the current load, before the battery requires re-charging. An in-depth data log also records historical data to enable the user to evaluate usage patterns and determine overall battery health. This includes values such as the highest/ lowest recorded voltages (for the main battery and auxiliary battery), deepest recorded discharge, time since last full discharge, cumulative Amp hours drawn, time since last full charge, total energy charged/discharged and many more. Customisation The user can set high/low thresholds for battery voltage (either battery), battery state of charge (main battery) or the battery temperature (additional sensor required). If any of the above parameters fall outside of this specified range, the battery shunt will activate an alarm on the connected mobile app. Advanced communication This smart battery shunt features inbuilt Bluetooth, enabling the user to wirelessly connect their mobile device to the monitor. Then, using the Victron Connect App on a smartphone or tablet, you will unlock numerous possibilities for advanced programming and remote monitoring of your battery system. A wide range of features are made available, including real-time data transmission, as well as the option to amend battery storage information, program alarms, and set up or join an existing VE.Smart network. Alternatively, the VE Direct USB Cable can be used to establish a connection to a non-Bluetooth-enabled PC/laptop. The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops. Compatibility This SmartShunt is suitable for use with any 12V, 24V or 48V Lead Acid / Gel / AGM / Lithium battery or battery bank. The maximum admissible nominal current through the shunt is 2000A. Additional items The shunt is also supplied with 2 x 1.5m positive supply cables with a fuse to connect the battery shunt to up to two battery banks. If you are looking for different size Victron SmartShunts: Victron Energy SmartShunt 500A/50mV – SHU050150050 Victron 1000A 12V/24V/48V Battery Monitoring Smartshunt With Bluetooth - SHU050210050 Victron 2000A 12V/24V/48V Battery Monitoring Smartshunt With Bluetooth - SHU050220050 Datasheet Victron Smartshunt Datasheet Video

...Read more View Product

£308.99

Victron Energy BlueSolar MPPT 150/60 MC4 – SCC010060300

Victron Energy BlueSolar MPPT 150/60 MC4 – SCC010060300 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultrafast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. The full output current up to 40°C (104°F). Flexible charge algorithm Fully programmable charge algorithm (see the software page on our website), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Real-time data display options – ColorControl GX or other GX devices: see the Venus documents on our website. – A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC010060300 GTIN 8719076025481 Voltage 12/24/48V Rated Charge Current 60A Nominal PV Power, 12V 860W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H215 x W250 x D95mm Weight 3Kg Warranty 5 Years

...Read more View Product

£366.00

Victron Energy BlueSolar MPPT 150/45 MC4 – SCC010045300

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultrafast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. The full output current up to 40°C (104°F). Flexible charge algorithm Fully programmable charge algorithm (see the software page on our website), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Real-time data display options – ColorControl GX or other GX devices: see the Venus documents on our website. – A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC010045300 GTIN 8719076025443 Voltage 12/24/48V Rated Charge Current 45A Nominal PV Power, 12V 650W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H215 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£499.99

Victron Energy SmartSolar MPPT 250V 85A MC4 VE.Can – 250/85 SCC125085511

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC125085511 Voltage 12/24/48V Rated Charge Current 85A Nominal PV Power, 12V 1200W Max. PV Short Circuit Current 70A (max 30A per MC4 conn.) Max. PV Open Circuit Voltage 250V absolute maximum coldest conditions 245V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled Yes Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£399.99

Victron Energy SmartSolar MPPT 250V 60A MC4 – SCC125060321

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Remote Monitoring and Control Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. Synchronized parallel charging with Bluetooth Up to 10 units can be synchronized with Bluetooth. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. Brand Victron Energy Manufacturer Part Number SCC125060321 GTIN 8719076050858 Voltage 12/24/48V Rated Charge Current 60A Nominal PV Power, 12V 860W Max. PV Short Circuit Current 35A (max 30A per MC4 conn.) Max. PV Open Circuit Voltage 250V absolute maximum coldest conditions 245V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled Yes Dimensions H215 x W250 x D95mm Weight 3Kg Warranty 5 Years

...Read more View Product

Full Power System Kits

Shop By Application

Electrical Components

Power Banks

Victron Energy

Usage Styles

shop by application

shop electrical parts

Shop Power Banks

Shop Victron Energy

solar Panel Kits by size (w)

Solar Panel Kits by Vehicle

Solar Panel Kits by Price (£)

all solar panel kit categories

Solar Panels

solar panel cables & accessories

shop solar panel kits by size (W)

shop solar panel kits by vehicle

shop solar panel kits by price

shop all solar panel kit categories

shop solar panels by size (W)

shop solar panels by type

shop solar panel cables & accessories

Batteries

Battery Chargers

DC to DC charging

Battery & charging Accessories

Inverters

Victron Electrics

shop by battery type

shop by brand

shop by type

shop by kit

shop by type

shop by type

shop by BRAND

shop VICTRON ELECTRICS

WATER & PLUMBING

diesel heaters

Fridges & Freezers

cooking

ventilation & sky lights

Motorhomes

Motorhome Brands Power Upgrades

Full Power System Kits

Usage Styles

Shop By Application

shop by application

Electrical Components

shop electrical parts

Power Banks

Shop Power Banks

Victron Energy

Shop Victron Energy

solar Panel Kits by size (w)

shop solar panel kits by size (W)

Solar Panel Kits by Vehicle

shop solar panel kits by vehicle

Solar Panel Kits by Price (£)

shop solar panel kits by price

all solar panel kit categories

shop all solar panel kit categories

Solar Panels

shop solar panels by size (W)

shop solar panels by type

solar panel cables & accessories

shop solar panel cables & accessories

Batteries

shop by battery type

shop by brand

Battery Chargers

shop by type

DC to DC charging

shop by kit

Battery & charging Accessories

shop by type

Inverters

shop by type

shop by BRAND

Victron Electrics