Inverters

Victron Energy MultiPlus-II 12V 3000VA 120A 32A – PMP122305010

The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. Features A MultiPlus, plus ESS (Energy Storage System) functionality The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual. PowerControl and PowerAssist – Boosting the capacity of the grid or a generator A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters. Two AC Outputs The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. Virtually unlimited power thanks to parallel and three phase operation (not available for the 8k and 10k models) Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity. On-site system configuring, monitoring and control Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel. Remote configuring and monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. Brand Victron Energy Manufacturer Part Number PMP122305010 GTIN 8719076048916 Voltage 12V Cont. Output Power at 25°C 3000VA Peak Power 5500W Output AC Voltage 230V Transfer Switch 32A Max. AC Input Current 32A Max. Battery Charge Current 120A Protection Category IP22 Efficiency 93% Bluetooth Compatible Yes Dimensions H546 x W275 x D147mm Weight 19Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£599.00

Victron Energy MultiPlus 12v Inverter Charger 12/1600/70-16 VE.Bus – PMP122160000

Victron Energy MultiPlus 12v Inverter Charger 12/1600/70-16 VE.Bus – PMP122160000 The new style MultiPlus is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Features Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption Remote Monitoring and Control Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more… Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature. PowerControl – Dealing with limited generator, shore side or grid power With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools Programmable relay By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low). Brand Victron Energy Manufacturer Part Number PMP122160000 Voltage 12 Transfer Switch (A) 16 Cont. Output Power at 25°C (VA) 1600 Peak Power (W) 2800 Max Efficiency 93% Zero Load Power (W) 10 Charge Current House Battery (A) 70 Charge Current Starter Battery (A) 1 (12V and 24V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off On/off Protection Category IP21 Dimensions H470 x W265 x D120mm Weight (kg) 10.2 Warranty 5 Years Country of Manufacture India

...Read more View Product

£840.00

Victron Energy MultiPlus 12V 2000VA 80A 32A VE.Bus – PMP122200000

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Brand Victron Energy Manufacturer Part Number PMP122200000 GTIN 8719076052135 Voltage 12V Cont. Output Power at 25°C 2000VA Peak Power 3500W Output AC Voltage 230V Transfer Switch 35A Charge Current House Battery 80A Charge Current Starter Battery 1A Protection Category IP21 Efficiency 93% Bluetooth Compatible No Dimensions H506 x W236 x D147mm Weight 15.5Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£275.00

Victron Energy MultiPlus 12v Inverter Charger 12/500/20-16 VE.Bus – PMP121500000

Victron Energy MultiPlus 12v Inverter Charger 12/500/20-16 VE.Bus – PMP121500000 The new style MultiPlus is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Features Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption Remote Monitoring and Control Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more… Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature. PowerControl – Dealing with limited generator, shore side or grid power With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools Programmable relay By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low). Voltage (V) 12 gtin 5060709453083 Brand Victron Energy Manufacturer Part Number PMP121500000 Voltage 12 Warranty 5 Years Country of Manufacture India Peak Power (W) 900 Weight (kg) 4.4 Max Efficiency 90% Programmable Relay Yes Dimensions H311 x W182 x D100mm Battery Temperature Sensor Yes Remote on-off On/off/charger only Protection Category IP21 Three Phase and Parallel Operation Yes Power Control Yes Power Assist No Transfer Switch (A) 16 Cont. Output Power at 25°C (VA) 500 Cont. Output Power at 25°C (W) 430 Cont. Output Power at 40°C (W) 400 Cont. Output Power at 65°C (W) 300 Zero Load Power (W) 6 Zero Load Power in Search Mode (W) 2 Charge Current House Battery (A) 20 Charge Current Starter Battery (A) 1 VE.Bus Communication Port For parallel and three phase operation, remote monitoring and system integration DIP switches Yes Internal DC fuse 125A

...Read more View Product

£499.00

Victron Energy MultiPlus 12v Inverter Charger 12/1200/50-16 230V VE.Bus – PMP122120000

Victron Energy MultiPlus 12v Inverter Charger 12/1200/50-16 230V VE.Bus – PMP122120000 The new style MultiPlus is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Features Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption Remote Monitoring and Control Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more… Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature. PowerControl – Dealing with limited generator, shore side or grid power With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools Programmable relay By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low). Brand Victron Energy Manufacturer Part Number PMP122120000 Voltage 12V Transfer Switch (A) 16A Cont. Output Power at 25°C (VA) 1200 Peak Power (W) 2400 Max Efficiency 93% Zero Load Power (W) 10 Charge Current House Battery (A) 50 Charge Current Starter Battery (A) 1A(12V and 24V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off On/off/charger only Protection Category IP21 Dimensions H406 x W250 x D100mm Weight (kg) 8.2 Warranty 5 Years Country of Manufacture China

...Read more View Product

£299.00

Victron Energy Phoenix Inverter 12/1200 230V VE.Direct UK PIN122121410

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. The VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Power lead not included in the box Brand: Victron Energy PIN122121410 Remote on-off: Yes Cont. output power at 25°C (VA): 1200 Peak power (W): 2200 Maximum efficiency (%): 91 Battery-connection: Screw terminals Weight kg: 7.4 Dimensions: H117x 232 x 362mm Input voltage range: 9,2 - 17V Protection: a - f Output Voltage: 230VAC or 120VAC +/- 3% Warranty: 5 Years Zero load consumption: 7W

...Read more View Product

£139.99

Victron Energy Phoenix Inverter 12/500 VE.Direct UK – PIN121501400

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. Features VE.Direct communication port The VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Plug Type UK Max Efficiency 90% Continuous Output Power at 25°C 500VA

...Read more View Product

£25.99

Victron Energy Phoenix Inverter Control VE.Direct - REC040010210R

Remote On/Off switch panel for Victron's range of Phoenix VE.Direct inverters and newer Phoenix Smart inverters. A blue LED serves as a visual indicator that the inverter is powered. Supplied with a metal bracket and screws for a discrete, flush-mounted installation and no visible fixings. Installation is simple, requiring just a 2-core connection between the remote panel and the inverter remote control terminals. Features On/Off rocker switch Blue LED to indicate inverter is ON 5-year manufacturer's warranty

...Read more View Product

Out of Stock

£329.99

Iconica 1000W 12V Off Grid Hybrid Solar Inverter With 40A Mppt & 20A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica 1000W 12V hybrid inverter intelligently combines the functions of a 1000W pure sine wave inverter, 40A MPPT solar charge controller and a 20A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 1000W 12V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 1000VA of continuous power with a strong peak power handling capability of up to 2000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 40A MPPT solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.3. Enhanced 20A Smart battery charger: Designed to enable safe and efficient unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.Additional intelligent features:The Iconica 1000W 12V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences(solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. The inbuilt fan is helps to maintain an optimal operational temperature.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 12V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.If you are unsure whether 1000W is enough for your appliances, please refer to the following table: Table of typical power consumption of domestic appliances.This inverter is also supplied with a 1.5m cable with 3-pin UK plug for connection to a mains power outlet.Inverter specifications:Nominal battery voltage: 12VContinuous power output: 1000W / 1000VASurge power: 2000VAOutput voltage: 230V ACOutput frequency: 50HzOutput waveform: Pure sine waveMaximum solar input power: 500WMaximum open circuit solar input voltage: 102VMaximum solar charging current: 40AMPPT operating voltage range: 15V – 80VMaximum mains AC charging current: 20AMaximum combined charging current: 60APeak efficiency: 93%Operating temperature: -10C to 50CSupplied with:1.5m AC power cable with 3-pin UK plugPC connection cable and PC software CDSize: 32 x 22.5 x 8.8 cmWeight: 5 kg This product is covered by a 1 year manufacturer warranty. User Manual & Datasheet Iconica User Manual & Datasheet Watchpower Manual Watchpower User Manual

£699.00

Victron Energy Phoenix Inverter 12V 3000VA Smart – PIN122300000

The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems. It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave. Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish. Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect. Features Bluetooth built-in: fully configurable with a tablet or smartphone Low battery voltage alarm Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Alarm relay Monitoring: In- and output voltage, load and alarms VE.Direct communication port The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters. Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch. Brand Victron Energy Manufacturer Part Number PIN122300000 GTIN 8719076047360 Voltage 12V Cont. Output Power at 25°C 3000VA Peak Power 6000W Output AC Voltage 230V Protection Category IP21 Efficiency 93% Bluetooth Enabled Yes Dimensions H533 x W285 x D150mm Weight 19Kg Warranty 5 Years Country of Manufacture China

...Read more View Product

£499.00

Victron Energy Phoenix Inverter 12V 2000VA Smart – PIN122201000

The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems. It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave. Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish. Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect. Features Bluetooth built-in: fully configurable with a tablet or smartphone Low battery voltage alarm Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Alarm relay Monitoring: In- and output voltage, load and alarms VE.Direct communication port The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters. Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch. Brand Victron Energy Manufacturer Part Number PIN122201000 was PIN122200000 GTIN 8719076042655 Voltage 12V Cont. Output Power at 25°C 2000VA Peak Power 4000W Output AC Voltage 230V Protection Category IP21 Efficiency 92% Bluetooth Enabled Yes Dimensions H485 x W219 x D125mm Weight 13Kg Warranty 5 Years Country of Manufacture China

...Read more View Product

£40.01

Victron Energy VE.Direct Bluetooth Smart Dongle – ASS030536011

Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. View information wirelessly such as battery status and solar panel power, plus other useful data. The dongle is able to read data from all products with a VE.Direct port, such as the BMV-70x series battery monitors, Phoenix Inverters with VE.Direct port, MPPT Solar Charge Controllers. With the VE.Direct to Bluetooth Smart dongle you can get live status info, see historical values as well as configure Victron products.The dongle works together with the VictronConnect App, available for both Android and iOS devices. Brand Victron Energy Manufacturer Part Number ASS030536011 Weight (kg) 0.27 Warranty 5 Years Country of Manufacture India

...Read more View Product

£279.99

Iconica 1000W 12V Off Grid Hybrid Solar Inverter With 50A Charge Controller & 20A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica 1000W 12V hybrid inverter intelligently combines the functions of a 1000W pure sine wave inverter, 50A solar charge controller and a 20A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 1000W 12V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 1000VA of continuous power with a strong peak power handling capability of up to 2000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 50A PWM solar charge controller: Regulates the input from the solar panels to the batteries, with a full range of safety functions; including protection against overcharge, overheating, reverse current etc. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance, prolongs the life of your battery and can often recover some lost battery capacity. Performance data for the solar array is displayed on the LCD screen.3. Enhanced 20A Smart battery charger: Designed to enable safe and efficient unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.Additional intelligent features:The Iconica 1000W 12V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences(solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. The inbuilt fan is helps to maintain an optimal operational temperature.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 12V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.Please note: The PWM solar charge controller in this inverter achieves maximum efficiency with solar panels which produce between 17-25V. If you are planning to use this hybrid inverter with high voltage solar panels over 25V, we recommend purchasing a different model of Iconica hybrid inverter with an inbuilt MPPT controller instead.If you are unsure whether 1000W is enough for your appliances, please refer to the following table: Table of typical power consumption of domestic appliances.This inverter is also supplied with a 1.5m cable with 3-pin UK plug for connection to a mains power outlet.Inverter specifications:Nominal battery voltage: 12VContinuous power output: 1000W / 1000VASurge power: 2000VAOutput voltage: 230V ACOutput frequency: 50Hz /60 HzOutput waveform: Pure sine waveMaximum solar input power: 600WMaximum open circuit solar input voltage: 55VMaximum solar charging current: 50AMaximum mains AC charging current: 20AMaximum combined charging current: 50APeak efficiency: 93%Operating temperature: -10C to 50CSupplied with:1.5m AC power cable with 3-pin UK plugPC connection cable and PC software CDSize: 32 x 22.5 x 8.8 cmWeight: 5 kg User Manual & Datasheet Iconica User Manual & Datasheet Watchpower Manual Iconica Watchpower Manual

...Read more View Product

£360.00

Victron Energy MultiPlus 12v Inverter Charger 12/800/35-16 VE.Bus – PMP121800000

Victron Energy MultiPlus 12v Inverter Charger 12/800/35-16 VE.Bus – PMP121800000 The new style MultiPlus is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Features Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption Remote Monitoring and Control Monitor and control your MultiPlus and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more… Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature. PowerControl – Dealing with limited generator, shore side or grid power With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. High start-up power Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools Programmable relay By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low). Brand Victron Energy Manufacturer Part Number PMP121800000 Voltage 12 Transfer Switch (A) 16 Cont. Output Power at 25°C (VA) 800 Peak Power (W) 1600 Max Efficiency 92% Zero Load Power (W) 7 Charge Current House Battery (A) 35 Charge Current Starter Battery (A) 1 (12V and 24V models only) Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Yes Protection Category IP21 Dimensions H360 x W240 x D100mm Weight (kg) 6.4 Warranty 5 Years Country of Manufacture India

...Read more View Product

Out of Stock

£289.99

Iconica 3000W 24V Hybrid Off Grid Solar Inverter With 50A Charge Controller And 25A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - PWM Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. Please note this is a 24V system. The Iconica 3000W 24V hybrid inverter intelligently combines the functions of a 3000W 24V pure sine wave inverter, 50A solar charge controller and a 25A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 3000W 24V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, kitchen appliances, power tools, etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 50A PWM solar charge controller: Regulates the input from the solar panels to the batteries, with a full range of safety functions; including protection against overcharge, overheating, reverse current etc. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance, prolongs the life of your battery and can often recover some lost battery capacity. Performance data for the solar array is displayed on the LCD screen.3. Enhanced 25A Smart battery charger: Designed to enable safe and efficient unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.Additional intelligent features:The Iconica 3000W 24V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. The inbuilt fan is helps to maintain an optimal operational temperature.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 24V flooded and sealed GEL/AGM lead-acid battery banks with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.If you are unsure whether 3000W is enough for your appliances, please refer to the following table: Table of typical power consumption of domestic appliances.Inverter specifications:Nominal battery voltage: 24VContinuous power output: 3000W / 3000VASurge power: 6000VAOutput voltage: 230V ACOutput frequency: 50Hz /60 HzOutput waveform: Pure sine waveMaximum solar input power: 1200WMaximum open circuit solar input voltage: 80VMaximum solar charging current: 50AMaximum mains AC charging current: 25AMaximum combined charging current: 70APeak efficiency: 93%Operating temperature: -10C to 50CSupplied with a PC connection cable and PC software CDTerminals for mains power connectionSize: 33.4 x 28.5 x 10 cmWeight: 6.3 kg This product is covered by a 1 year manufacturer warranty.

£199.00

Victron Energy Phoenix Inverter 12V 800VA VE.Direct UK – PIN121801400

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. Features VE.Direct communication port The VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number PIN121801400 GTIN 8719076038405 Voltage 12V Cont. Output Power at 25°C 800VA Peak Power 1500W Output AC Voltage 230V Protection Category IP21 Efficiency 90% Bluetooth Enabled No Plug Type UK Dimensions H105 x W216 x D305mm Weight 5.5Kg Warranty 5 Years

...Read more View Product

£465.00

Victron Energy Phoenix Inverter 12V 1600VA Smart – PIN122161000

Previous part number - PIN122160000 The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems. It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave. Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish. Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect. Features Bluetooth built-in: fully configurable with a tablet or smartphone Low battery voltage alarm Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Alarm relay Monitoring: In- and output voltage, load and alarms VE.Direct communication port The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters. Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch. Brand Victron Energy Manufacturer Part Number PIN122160000 GTIN 8719076042686 Voltage 12V Cont. Output Power at 25°C 1600VA Peak Power 3000W Output AC Voltage 230V Protection Category IP21 Efficiency 92% Bluetooth Enabled Yes Dimensions H485 x W219 x D125mm Weight 12Kg Warranty 5 Years

...Read more View Product

£32.99

Inverter Switch 3 Position 8 Screw Terminals Cam Rotation Inverter Switch 220V/25A

Plastic external enclosure, 3 position inverter switch

...Read more View Product

Best Seller

£239.99

Iconica 2000W 24V Hybrid Solar Inverter With 50A Controller And 20A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. Please note this is a 24V system. The Iconica 2000W 24V hybrid inverter intelligently combines the functions of a 2000W 24V pure sine wave inverter, 50A solar charge controller and a 20A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 2000W 24V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fridge etc. Able to generate 2000VA of continuous power with a strong peak power handling capability of up to 4000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 50A PWM solar charge controller: Regulates the input from the solar panels to the batteries, with a full range of safety functions; including protection against overcharge, overheating, reverse current etc. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance, prolongs the life of your battery and can often recover some lost battery capacity. Performance data for the solar array is displayed on the LCD screen.3. Enhanced 20A Smart battery charger: Designed to enable safe and efficient unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.Additional intelligent features:The Iconica 2000W 24V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences(solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. The inbuilt fan is helps to maintain an optimal operational temperature.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 24V flooded and sealed GEL/AGM lead-acid battery banks with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.If you are unsure whether 2000W is enough for your appliances, please refer to the following table: Table of typical power consumption of domestic appliances.This inverter is also supplied with a 1.5m cable with 3-pin UK plug for connection to a mains power outlet.Inverter Specifications:Nominal battery voltage: 24VContinuous power output: 2000W / 2000VASurge power: 4000VAOutput voltage: 230V ACOutput frequency: 50Hz /60 HzOutput waveform: Pure sine waveMaximum solar input power: 1200WMaximum open circuit solar input voltage: 80VMaximum solar charging current: 50AMaximum mains AC charging current: 20AMaximum combined charging current: 50APeak efficiency: 93%Operating temperature: -10C to 50CSupplied with:1.5m AC power cable with 3-pin UK plugPC connection cable and PC software CDSize: 32 x 22.5 x 8.8 cmWeight: 5.5 kg User Manual & Datasheet Iconica User Manual & Datasheet Watchpower Manual Iconica Watchpower Manual

...Read more View Product

£79.99

Victron Energy Phoenix Inverter 12/250 230V VE.Direct UK – PIN121251400

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. Features VE.Direct communication port The VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number PIN121251400 gtin 8719076055006 Voltage 12V Cont. Output Power at 25°C 250VA Peak Power 400W Output AC Voltage 230V Efficiency 87% Protection Category IP21 Dimensions H86 x W165 x D260mm Weight 2.4Kg Warranty 5 Years Bluetooth Enabled No Plug Type UK Plug Type UK Max Efficiency 90% Continuous Output Power at 25°C 250va

...Read more View Product

£289.99

Iconica 2000W 24V Hybrid Solar Inverter With 40A Mppt And 25A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. Please note this is a 24V system. The Iconica 2000W 24V hybrid inverter intelligently combines the functions of a 2000W pure sine wave inverter, 40A MPPT solar charge controller and a 25A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 2000W 24V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 2000VA of continuous power with a strong peak power handling capability of up to 4000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 40A MPPT solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to a load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.3. Enhanced 25A Smart battery charger: Designed to enable safe and efficient unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.Additional intelligent features:The Iconica 2000W 24V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences(solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. The inbuilt fan is helps to maintain an optimal operational temperature.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 24V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.If you are unsure whether 2000W is enough for your appliances, please refer to the following table: Table of typical power consumption of domestic appliances.This inverter is also supplied with a 1.5m cable with 3-pin UK plug for connection to a mains power outlet.Inverter specifications:Nominal battery voltage: 24VContinuous power output: 2000W / 2000VASurge power: 4000VAOutput voltage: 230V ACOutput frequency: 50Hz /60 HzOutput waveform: Pure sine waveMaximum solar input power: 1000WMaximum open circuit solar input voltage: 102VMaximum solar charging current: 40AMPPT operating voltage range: 30V – 80VMaximum mains AC charging current: 25AMaximum combined charging current: 60APeak efficiency: 93%Operating temperature: -10C to 50CSupplied with:1.5m AC power cable with 3-pin UK plugPC connection cable and PC software CDSize: 32 x 22.5 x 8.8 cmWeight: 5.5 kg This product is covered by a 1 year manufacturer warranty.

...Read more View Product

£59.00

Victron Energy Interface MK3-USB (VE.Bus to USB) – ASS030140000

The MK3-USB allows the following products to connect to a computer for configuration and firmware updates: Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.

...Read more View Product

£835.00

Victron Energy MultiPlus-II 48V 5000VA 70A 50A – PMP482505010

The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. Features A MultiPlus, plus ESS (Energy Storage System) functionality The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual. PowerControl and PowerAssist – Boosting the capacity of the grid or a generator A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters. Two AC Outputs The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. Virtually unlimited power thanks to parallel and three phase operation (not available for the 8k and 10k models) Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity. On-site system configuring, monitoring and control Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel. Remote configuring and monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. Brand Victron Energy Manufacturer Part Number PMP482505010 GTIN 8719076047599 Voltage 48V Cont. Output Power at 25°C 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 70A Protection Category IP22 Efficiency 96% Bluetooth Compatible Yes Dimensions H565 x W320 x D149mm Weight 30Kg Warranty 5 Years

...Read more View Product

£689.99

Iconica 5000W 48V Hybrid Off Grid Solar Inverter With 6000W Solar Input, 80A Mppt And 100A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica 5000W 48V hybrid inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A MPPT solar charge controller and a 100A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This inverter features the rare and unique ability to power AC appliances without connection to a battery - directly from solar power.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent, or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g., remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 5000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 5000VA of continuous power with a strong peak power handling capability of up to 10000VA (to start powerful appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 6000W high solar input MPPT Solar charge controller: Regulates the input from the solar panels and charges the batteries at up to 80A, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. Advanced MPPT technology extracts the maximum possible output from the solar panels and operates at up to 98% efficiency. This inverter is therefore well-suited to systems with a large and powerful solar array, with a maximum allowed solar input of 6000W. Performance data for the solar array is displayed on the LCD screen. 3. Enhanced 100A Smart battery charger: Designed to enable safe, efficient, and fast (up to 100A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 8 further inverters), offering the possibility of large-scale system expansion, with up to 45kw of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately).Additional intelligent features:The Iconica 5000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Load power without a battery: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. By powering loads using the energy directly supplied from the solar panels, this Iconica inverter offers a uniquely independent and versatile power system, free from batteries if preferred. Removing the need for batteries also increases the efficiency of the energy generated from the solar array by reducing the power losses that this transfer of energy would usually cause. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. For example, if 4000W of solar power is flowing into the inverter, 2000W can be used to run appliances whilst the remaining 2000W will be used for charging the battery bank. - Output source priority: This intelligent feature allows the user to set output source preferences (solar/battery power/mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g., which source of energy is given priority for the AC output if solar power is insufficient/if battery voltage is too low/if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/using a combination of solar power and mains power/from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/battery/AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email/push notification/SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 48V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries. Inverter specifications: Nominal battery voltage: 48V Continuous power output: 5000W/5000VA (220-240V AC) Surge power: 10000VA Output frequency: 50 Hz/60 Hz Output waveform: Pure sine wave Maximum solar input power: 6000W Maximum open circuit solar input voltage: 450V Solar MPPT operating voltage: 120-430V DC Maximum solar input current: 27A Maximum solar charging current: 80A Maximum mains AC charging current: 100A Maximum combined charging current: 100A Peak efficiency: 90% Solar/AC charger max efficiency: 98% Operating temperature: -10°C to 50°C Supplied with a PC connection cable and software Paralleled operation with up to 8 further units, using a parallel connection kit Size: 120 x 295 x 468 mm Weight: 11 kg

...Read more View Product

£1,710.00

Victron Energy MultiPlus-II 24/5000/120-50 230V – PMP242505010

The 24/5000-120-50 MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. Note: for a short period of time this product was called MultiGrid-II. Features of the MultiPlus-II 24/5000/120-50 PowerAssist The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. ESS: Energy Storage Systems The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. For examples and more detailed information see the ESS (Energy Storage System) manual. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Remote Monitoring and Control When coupled with a Cerbo GX you can monitor and control your MultiPlus-II 24/5000 and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto-starting a backup generator and more…” If you want to access directly, use the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50. Why not look at the VE.Bus Smart dongle which measures battery voltage and temperature allowing monitoring and control with a smart phone or other Bluetooth enabled device. Brand Victron Energy Manufacturer Part Number PMP242505010 GTIN 8719076052913 Voltage 24V Cont. Output Power at 25°C 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 120A Protection Category IP22 Efficiency 96% Bluetooth Compatible Yes Dimensions H607 x W330 x D149mm Weight 30Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£589.99

Iconica 3000W 24V Hybrid Off Grid Inverter With 60A Mppt And 60A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. This Iconica 3000W 24V hybrid inverter intelligently combines the functions of a 3000W 24V pure sine wave inverter, 60A MPPT solar charge controller and a 60A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 3000W 24V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, kitchen appliances, power tools, etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 60A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.3. Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.Additional intelligent features:This Iconica 3000W 24V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit or 3G connection kit (purchased separately). By connecting via either of these two methods, the user will unlock access to exclusive features such as SMS / email status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. The inbuilt fan is helps to maintain an optimal operational temperature.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 24V flooded and sealed GEL/AGM lead-acid battery banks with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.If you are unsure whether 3000W is enough for your appliances, please refer to the following table: Table of typical power consumption of domestic appliances.Inverter specifications:Nominal battery voltage: 24VContinuous power output: 3000W / 3000VASurge power: 6000VAOutput voltage: 230V ACOutput frequency: 50Hz /60 HzOutput waveform: Pure sine waveMaximum solar input power: 1500WMaximum open circuit solar input voltage: 145VMaximum solar charging current: 60AMPPT operating voltage range: 30V – 115VMaximum mains AC charging current: 60AMaximum combined charging current: 120APeak efficiency: 93%Operating temperature: -10C to 50CSupplied with a PC connection cable and PC software CDTerminals for mains power connectionSize: 44 x 30 x 10 cmWeight: 9.5 kg This product is covered by a 1 year manufacturer warranty

...Read more View Product

£689.99

Iconica 3000W 24V Hybrid Off Grid Solar Inverter With 4000W MPPT, 60A Mains Charger (No Battery Required)

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica 3000W 24V hybrid inverter intelligently combines the functions of a 3000W pure sine wave inverter, 80A MPPT solar charge controller and a 60A smart battery charger in one single unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its hybrid capability, this innovative inverter features advanced communication functions including inbuilt Bluetooth, along with a menu full of highly customisable settings.This inverter features the rare and unique ability to power AC appliances without connection to a battery - directly from solar power.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts, and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 3000W 24V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 3000W of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. The inverter is able to take power from solar panels directly for its operation, even if the battery is not available.2. Inbuilt 80A MPPT Solar charge controller with high input voltage of up to 500V DC: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.3. Enhanced 60A Smart battery charger: Designed to enable safe, efficient and fast (up to 60A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. Inbuilt Bluetooth connectivity: The integrated Bluetooth function allows the inverter to be monitored remotely via the Watchpower mobile app - a free mobile app available for Android devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc.Additional intelligent features:The Iconica 3000W 24V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Load power without a battery: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. By powering loads using the energy directly supplied from the solar panels, this Iconica inverter offers a uniquely independent and versatile power system, free from batteries if preferred. Removing the need for batteries also increases the efficiency of the energy generated from the solar array by reducing the power losses that this transfer of energy would usually cause. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. For example, if 4000W of solar power is flowing into the inverter, 2000W can be used to run appliances whilst the remaining 2000W will be used for charging the battery bank. - Simplified installation: The exceptionally high solar input voltage of this inverter of up to 500V DC allows the solar panels to be connected in series in one single chain. This eliminates the need for complicated multiple string connections, blocking diodes and expensive thick cables.- Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated removable LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc. The LCD display is removable and can be positioned up to 20m away from the inverter for remote system monitoring (requires additional basic RJ45 connection cable – not included). - Advanced communication options: In addition to the integrated Bluetooth feature, this inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- USB On-the-Go function: The inverter is supplied with a USB drive which allows the user to facilitate upload/ download of system data.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- BMS connectivity: The inverter features a Battery Management System (BMS) port, offering the possibility to connect to an optional BMS.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components.The fan is also designed to be easily removed in order to simplify maintenance of the inverter.Compatibility:This hybrid inverter is suitable for 24V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.Please note that in order to enable the solar charging or direct operation of the loads from solar panels, your solar array must meet the minimum MPPT input voltage requirement of the inverter of 120V (several solar panels connected in series). Inverter specifications:Nominal battery voltage: 24VContinuous power output: 3000W/3000VA (220-240V AC)Surge power: 6000VAOutput frequency: 50HzOutput waveform: Pure sine waveMaximum solar input power: 4000WMaximum open circuit solar input voltage: 500V (open circuit)MPPT operating solar voltage: 120V - 450VMaximum solar charging current: 80AMaximum mains AC charging current: 60AMaximum combined charging current: 80APeak efficiency: 93%Solar / AC charger max efficiency: 98%Operating temperature: -10°C to 50°CSupplied with USB drive, PC connection cable and PC software CDSize: 44 x 30 x 11.5 cmWeight: 9 kg

...Read more View Product

£1,180.00

Victron Energy EasySolar-II 24V 3000VA 70A 32A MPPT 250/70 GX – PMP242307010

Available on back-order Delivery: 7-10 days The EasySolar-II GX combines an MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure. The product is easy to install, with a minimum of wiring. Features The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: A MultiPlus-II inverter/charger A SmartSolar MPPT -Tr solar charge controller A GX device with a 2 x 16-character display. These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device The integrated GX device includes: A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port. A USB port An Ethernet port A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection. Brand Victron Energy Manufacturer Part Number PMP242307010 GTIN 8719076049265 Voltage 24V Cont. Output Power at 25°C 3000VA Peak Power 5500W Output AC Voltage 230V Transfer Switch 32A Max. AC Input Current 32A Max. Battery Charge Current 70A Protection Category IP21 Efficiency 94% Bluetooth Compatible Yes Dimensions H499 x W268 x D237mm Weight 26Kg Warranty 5 Years

...Read more View Product

£860.00

Victron Energy MultiPlus 12v Inverter Charger Compact 12/2000/80-30 VE.Bus – CMP122200000

Victron Energy MultiPlus 12v Inverter Charger Compact 12/2000/80-30 VE.Bus – CMP122200000 The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Brand Victron Energy Manufacturer Part Number CMP122200000 Voltage 12 Transfer Switch (A) 30 Cont. Output Power at 25°C (VA) 2000 Peak Power (W) 3500 Max Efficiency 93% Zero Load Power (W) 9 Charge Current House Battery (A) 80 Charge Current Starter Battery (A) 4 Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Yes Protection Category IP21 Dimensions H520 x W255 x D125mm Weight (kg) 12 Warranty 5 Years Country of Manufacture India

...Read more View Product

£749.00

Victron Energy MultiPlus-II 24/3000/70-32 230V – PMP242305010

Enhance your power management with the Victron MultiPlus-II 24/3000/70-32 (PMP242305010). This inverter/charger blends MultiPlus and MultiGrid functionalities, offering PowerAssist, ESS capability, UPS function, and remote control. Explore advanced features for efficient energy control. PowerAssist Technology Energy Storage Systems (ESS) Uninterrupted AC Power (UPS Function) Remote Monitoring and Control The 24/3000-70-32 MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. Note: for a short period of time this product was called MultiGrid-II. Features of the MultiPlus-II 24/3000/70-32 PowerAssist The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. ESS: Energy Storage Systems The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. For examples and more detailed information see the ESS (Energy Storage System) manual. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The 24/3000-70-32 MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. Note: for a short period of time this product was called MultiGrid-II. Features of the MultiPlus-II 24/3000/70-32 PowerAssist The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. ESS: Energy Storage Systems The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. For examples and more detailed information see the ESS (Energy Storage System) manual. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Remote Monitoring and Control When coupled with a Cerbo GX you can monitor and control your MultiPlus-II 24/3000 and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backupgenerator and more…” If you want to access directly, use the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50. Brand Victron Energy Manufacturer Part Number PMP242305010 gtin 8719076048084 Voltage 24V Cont. Output Power at 25°C 3000VA Peak Power 5500W Output AC Voltage 230V Transfer Switch 32A Max. Battery Charge Current 70A Max. AC Input Current 32A Protection Category IP22 Efficiency 94% Bluetooth Compatible Yes Dimensions H506 x W275 x D147mm Weight 18Kg Warranty 5 Years

...Read more View Product

£789.99

Iconica 5000W 48V HybridOff Grid Solar Inverter With 80A Mppt & 60A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica 5000W 48V hybrid inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A MPPT solar charge controller and a 60A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 5000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 5000VA of continuous power with a strong peak power handling capability of up to 10000VA (to start powerful appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 80A MPPT Solar charge controller: Regulates the input from the solar panels to the batteries, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. Advanced MPPT technology extracts the maximum possible output from the solar panels and operates at up to 98% efficiency. This inverter is therefore well-suited to systems with a large and powerful solar array, with a maximum allowed solar input of 4000W. Performance data for the solar array is displayed on the LCD screen. 3. Enhanced 60A Smart battery charger: Designed to enable safe, efficient and fast (up to 60A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 8 further inverters), offering the possibility of large scale system expansion, with up to 45kw of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately).Additional intelligent features:The Iconica 5000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 48V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries. Inverter specifications:Nominal battery voltage: 48VContinuous power output: 5000W / 5000VA (220-240V AC)Surge power: 10000VAOutput frequency: 50Hz /60 HzOutput waveform: Pure sine waveMaximum solar input power: 4000WMaximum open circuit solar input voltage: 145VSolar MPPT operating voltage: 60-115V DCMaximum solar charging current: 80AMaximum mains AC charging current: 60AMaximum combined charging current: 140APeak efficiency: 93%Solar / AC charger max efficiency: 98%Operating temperature: 0°C to 55°CSupplied with a PC connection cable and PC software CDParalleled operation with up to 8 further units, using a parallel connection kit(s)Size: 120 x 295 x 468 mmWeight: 13.5 kg

...Read more View Product

£1,389.99

Iconica Max 8000W 48V Hybrid Off Grid Solar Inverter With 8000W Solar Input, Dual-Input 80A 500V Mppt Solar Controller, 120A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica MAX 8000W 48V hybrid inverter intelligently combines the functions of an 8000W pure sine wave inverter, 80A MPPT solar charge controller with two independent inputs and an extremely powerful 120A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This inverter features the rare and unique ability to power AC appliances without connection to a battery - directly from solar power.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent, or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g., remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 8000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 8000VA of continuous power with a strong peak power handling capability of up to 16000VA (to start powerful appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 8000W high solar input MPPT Solar charge controller: Two independent solar inputs can each accept up to 4000W of solar power. The MPPT charge controller regulates the input from the solar panels and charges the batteries at up to 80A, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. Advanced MPPT technology extracts the maximum possible output from the solar panels and operates at up to 98% efficiency. This inverter is therefore well-suited to systems with large and powerful solar arrays, or two solar arrays with different panels or light conditions. Performance data for the solar arrays is displayed on the LCD screen.3. Enhanced 120A Smart battery charger: Designed to enable safe, efficient, and fast (up to 120A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 5 further inverters), offering the possibility of large-scale system expansion, with up to 48kw of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately). Additional intelligent features:The Iconica MAX 8000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Load power without a battery: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. By powering loads using the energy directly supplied from the solar panels, this Iconica inverter offers a uniquely independent and versatile power system, free from batteries if preferred. Removing the need for batteries also increases the efficiency of the energy generated from the solar array by reducing the power losses that this transfer of energy would usually cause. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. For example, if 4000W of solar power is flowing into the inverter, 2000W can be used to run appliances whilst the remaining 2000W will be used for charging the battery bank. - Output source priority: This intelligent feature allows the user to set output source preferences (solar/battery power/mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g., which source of energy is given priority for the AC output if solar power is insufficient/if battery voltage is too low/if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/using a combination of solar power and mains power/from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated removable LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc. The LCD display is removable and can be positioned up to 20m away from the inverter for remote system monitoring (requires additional basic RJ45 connection cable – not included). - Customisable RGB light bar: LED indicator strip across the front of the inverter can be programmed to show battery charge level or solar/mains/battery input in customisable colours, allowing you to easily see the system status at a glance.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/battery/AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/Excel formats from the PC software. This inverter also has the potential to send data to a mobile app using the built-in wi-fi kit, or to an online user portal a Wi-Fi connection kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email/push notification/SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1, 2 or 3 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 48V flooded, sealed GEL/AGM lead-acid and Lithium batteries with pre-defined charging programs (consult the battery supplier for advice on Lithium battery charging settings). A user-defined battery type with numerous customisable settings is also available for charging other battery types. Inverter specifications: Nominal battery voltage: 48V Continuous power output: 8000W/8000VA (220-240V AC) Surge power: 16000VA Output frequency: 50/60Hz Output waveform: Pure sine wave Maximum solar input power: 4000W per input (8000W total) Maximum solar input current: 18A per input Maximum open circuit solar input voltage: 500V (open circuit) MPPT solar operating voltage: 90V - 450V Maximum solar charging current: 80A Maximum mains AC charging current: 120A Maximum combined charging current: 120A Peak efficiency: 93% Operating temperature: -10°C to 50°C Supplied with solar connectors, cable glands, PC connection cable and PC software Size: 147.4 x 432.5 x 553.6 mm Weight: 18.4 kg

...Read more View Product

£379.99

Iconica 3000W 24V Hybrid Off Grid Solar Inverter - 40A Mppt And 25A Mains Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. Please note this is a 24V system. The Iconica 3000W 24V hybrid inverter intelligently combines the functions of a 3000W pure sine wave inverter, 40A MPPT solar charge controller and a 25A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 3000W 24V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 40A MPPT solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.3. Enhanced 25A Smart battery charger: Designed to enable safe and efficient unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.Additional intelligent features:The Iconica 3000W 24V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences(solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. The inbuilt fan is helps to maintain an optimal operational temperature.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 24V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.If you are unsure whether 3000W is enough for your appliances, please refer to the following table: Table of typical power consumption of domestic appliances.Inverter specifications:Nominal battery voltage: 24VContinuous power output: 3000W / 3000VASurge power: 6000VAOutput voltage: 230V ACOutput frequency: 50Hz /60 HzOutput waveform: Pure sine waveMaximum solar input power: 1000WMaximum open circuit solar input voltage: 102VMaximum solar charging current: 40AMPPT operating voltage range: 30V – 80VMaximum mains AC charging current: 25AMaximum combined charging current: 60APeak efficiency: 93%Operating temperature: -10C to 50CSupplied with a PC connection cable and PC software CDTerminals for mains power connectionSize: 32 x 22.5 x 8.8 cmWeight: 7 kg This product is covered by a 1 year manufacturer warranty

...Read more View Product

£109.99

Wi-Fi Remote Monitoring Kit For Iconica Hybrid Inverters (With Email Communication)

This intelligent Wi-Fi remote monitoring kit uses Wi-Fi connectivity to enable advanced remote monitoring of an Iconica hybrid inverter from any location in the world. The Wi-Fi card collects data from the Iconica inverter and transmits it to the user using the preferred method from the following two options: 1) Short-distance mode: By creating a Wi-Fi network which the user can access from a nearby location (within approx 10-50m radius depending on obstructions) on a mobile device 2) Long-distance mode: By connecting to an existing broadband network, where inverter data is transmitted to an online server, enabling the user to view data from any location via an internet browser. In case of long distance monitoring the data is accessed by logging into an online portal, DataCenter, which features an extensive range of options for monitoring system data. This Wi-Fi kit also has the ability to send email notifications to one or multiple email addresses, alerting the user of alarm events or system reminders. Kit includes: Wi-Fi card and unit (with antenna) DB9 to RJ45 cable for connection to the Iconica inverter Additionally required: Broadband network (only if long-distance remote monitoring is preferred) 12V power supply (mains to 12V DC power adapter) with some inverters This kit is compatible with Iconica hybrid inverters. Please note that Iconica 4KW and 5KW KMS series inverters can power this Wi-Fi remote monitoring kit directly using the RJ45 cable included with this kit. Other Iconica inverters cannot power the kit directly, and a mains to 12V DC power adapter with a 5.5/2.5mm DC power jack connector must be sourced additionally in order to enable operation of this Wi-Fi kit. Online data portal: This Wi-Fi kit intelligently communicates with an Iconica inverter to transmit data to the online portal, DataCenter. After creating a username and password, the user will be able to login from a mobile phone / tablet / PC to remotely view system information. Options for remote monitoring include: - Live in-depth data monitoring: View up-to-date system information (refreshed every 5 minutes) including: PV input voltage, battery voltage, charging current, grid voltage, grid output voltage, AC output power, output load percentage, total AC output (in VA or as a percentage value), nominal rated input voltage / output voltage and frequency / battery voltage - Detailed datalogs: Historical system data and alarm history is recorded and stored indefinitely. It is available to view for any given date range over the inverter's lifespan. The specific time and dates of each recorded value / alarm event are also displayed. - 3D infographics and diagrams: A system status diagram illustrates all connected system components (solar panel, load, battery. For certain Iconica models, bar charts display total generated power (hourly, daily, monthly or annual data). - Regional monitoring: Option to group together and monitor multiple Iconica inverters based on location, allowing the user to view combined data for inverters in a particular region, such as: PV input power, grid voltage and battery capacity percentage. (One Wi-Fi kit required per inverter). - Multiple user access: Option for the administrator to create and manage several accounts for other authorised users to access the online portal and view /program settings for the assigned inverter. Additional users can also receive email status updates. Email notifications: The user can choose to be notified via email when any system faults or warnings are detected. Compatibility: This Wi-Fi remote monitoring kit is designed for use with Iconica Hybrid Inverters It is not suitable for use with any other inverter.

...Read more View Product

£660.00

Victron Energy MultiPlus Compact 12V 1600VA 70A 16A VE.Bus – CMP121620000

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications). On-site Monitoring and control Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232). Remote Monitoring and control Color Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. Remote configuring When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely Brand Victron Energy Manufacturer Part Number CMP121620000 GTIN 8719076021964 Voltage 12V Cont. Output Power at 25°C 1600VA Peak Power 3000W Output AC Voltage 230V Transfer Switch 16A Charge Current House Battery 70A Charge Current Starter Battery 4A Protection Category IP21 Efficiency 93% Bluetooth Compatible No Dimensions H375 x W214 x D110mm Weight 10Kg Warranty 5 Years

...Read more View Product

£849.00

Victron Energy Phoenix Inverter 12V 3000VA VE.Bus – PIN123020000

Pure sine wave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds. SinusMax – Superior engineeringDeveloped for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem free, to any load. Parallel and 3-phase operation capabilityUp to 6 Phoenix Inverters can operate in parallel to achieve higher power output. Six 24 V 5000 VA units, for example, will provide 24 kW / 30 kVA output power. Operation in 3-phase configuration is also possible. Features SinusMax – Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. Virtually unlimited power thanks to parallel and 3-phase operation capability Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible. To transfer the load to another AC source: the automatic transfer switch If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds). Communications interface These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control. Brand Victron Energy Manufacturer Part Number PIN123020000 GTIN 8719076023579 Voltage 12V Cont. Output Power at 25°C 3000VA Peak Power 6000W Output AC Voltage 230V Protection Category IP21 Efficiency 93% Bluetooth Enabled No Dimensions H362 x W258 x D218mm Weight 18Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

Out of Stock

£319.00

2000W 12V Pure Sine Wave Power Inverter With On/Off Remote Control

A power inverter is a device which converts battery output (DC, or direct current) into 230V AC mains electricity (alternating current). 230V AC is the type of electricity supplied by utility companies to run standard domestic appliances such as a TV, fridge, radio, lights or to charge a laptop / mobile phone etc. If you have a battery, connecting a power inverter will enable you to power household appliances in areas with no access to mains electricity; such as in a motorhome, caravan, boat, farm or any other remote location. Inverters are also perfect for off-grid and back up systems for accidental power cuts. This is a pure sine wave type of inverter, which means that the 230V AC output harmonically follows a smooth sine wave and is almost identical to normal mains electricity. Pure sine wave output is far superior than square sine wave or modified sine wave output for running appliances. This is because: - It is suitable for a broader range of appliances (for example, appliances with electric motors can not be powered by modified sine wave inverters)- It is more efficient compared to modified sine wave inverters. This 2000W 12V pure sine wave power inverter can generate 4000W of continuous power and up to 3000W of power at peak times (peak time reserve capacity is useful if more energy is required to start an appliance than for its continuous running). This product comes with important protection and safety features, such as over-discharge, overload, overheating and short-circuit automatic shutdown. In addition, the inverter has a USB port for powering USB-compatible devices (e.g. mobile phones, tablets, laptops, MP3 players etc.) and is also supplied with a wireless On/Off remote control (max. 50m radius). Specifications: Input: 12V (10-15V) DC Output: 220-240V AC Output frequency: 50 Hz Output waveform: pure sine wave THD: < 3% Continuous power: 2000W Surge power: 4000W Peak efficiency: 90% Low battery shut down: 10.0V +/- 0.5V DC Low battery alarm: 10.5V +/- 0.5V DC High voltage shut down: 15.5V +/- 0.5V DC Thermal shut down: 60 +/-5°C Rated USB output: 2A Wireless remote control radius: Approx. 50m Size (inc. terminals): 390 x 220 x 95 mm Weight: 5.0 kg

Out of Stock

£259.00

1500W 12V Pure Sine Wave Power Inverter With On/Off Remote Control

A power inverter is a device which converts battery output (DC, or direct current) into 230V AC mains electricity (alternating current). 230V AC is the type of electricity supplied by utility companies to run standard domestic appliances such as a TV, fridge, radio, lights or to charge a laptop / mobile phone etc. If you have a battery, connecting a power inverter will enable you to power household appliances in areas with no access to mains electricity; such as in a motorhome, caravan, boat, farm or any other remote location. Inverters are also perfect for off-grid and back up systems for accidental power cuts. This is a pure sine wave type of inverter, which means that the 230V AC output harmonically follows a smooth sine wave and is almost identical to normal mains electricity. Pure sine wave output is far superior than square sine wave or modified sine wave output for running appliances. This is because: - It is suitable for a broader range of appliances (for example, appliances with electric motors can not be powered by modified sine wave inverters)- It is more efficient compared to modified sine wave inverters. This 1500W 12V pure sine wave power inverter can generate 1500W of continuous power and up to 3000W of power at peak times (peak time reserve capacity is useful if more energy is required to start an appliance than for its continuous running). This product comes with important protection and safety features, such as over-discharge, overload, overheating and short-circuit automatic shutdown. In addition, the inverter has a USB port for powering USB-compatible devices (e.g. mobile phones, tablets, laptops, MP3 players etc.) and is also supplied with a wireless On/Off remote control (max. 50m radius). Specifications: Input: 12V (10-15V) DC Output: 230-240V AC Output frequency: 50 Hz Output waveform: pure sine wave THD: < 3% Continuous power: 1500W Surge power: 3000W Peak efficiency: 90% Low battery shut down: 10.0V +/- 0.5V DC Low battery alarm: 10.5V +/- 0.5V DC High voltage shut down: 15.5V +/- 0.5V DC Thermal shut down: 60 +/-5°C Rated USB output: 2A Wireless remote control radius: Approx. 50m Size: 405 x 220 x 90 mm Weight: 4.4 kg

£989.99

Iconica 6000W 48V Off Grid Inverter With Zero Transfer, 6000W Solar Input, 120A Mppt, 120A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica 6000W 48V hybrid inverter intelligently combines the functions of a 6000W pure sine wave inverter, 120A MPPT solar charge controller and a 120A smart battery charger in one single unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its hybrid capability, this innovative inverter features zero transfer time which enables instant 0ms transfer from mains to battery mode when the mains power is interrupted. In addition the inverter has advanced communication functions including inbuilt Wi-Fi, along with a menu full of highly customisable settings. This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features a zero transfer time Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts, and cabins or narrowboats, yachts etc), IT systems requiring continuous operation in case of power failures, as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts. Key functions: 1. 6000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 6000W of continuous power with a strong peak power handling capability of up to 12000VA (to start appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 120A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 120A Smart battery charger: Designed to enable safe, efficient and fast (up to 120A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages. 4. UPS zero transfer time: Offers instant 0ms transfer from mains to battery mode when mains power is interrupted (normal speed of transfer for other inverters is 15-20ms). This improved UPS functionality allows critical IT loads such as computers and servers to operate continuously in case of power failures. 5. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 8 further inverters), offering the possibility of large scale system expansion, with up to 54kW/54kVA of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately). 6. Inbuilt Wi-Fi connectivity: The integrated Wi-Fi function allows the inverter to be monitored remotely via the Watchpower mobile app - a free mobile app available for Android and iOS devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc. Additional intelligent features: The Iconica 6000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include: - Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc. - Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc. - A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - Illuminated removable LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc. The LCD display is removable and can be positioned up to 20m away from the inverter for remote system monitoring (requires additional basic RJ45 connection cable – not included). - Advanced communication options: In addition to the integrated Wi-Fi feature, this inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit (purchased separately). By connecting via this method, the user will unlock access to exclusive features such as email status updates for the inverter, remote system monitoring from any location and much more. - USB On-the-Go function: The inverter is supplied with a USB drive which allows the user to facilitate upload/ download of system data. - Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level. - Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. Compatibility: This hybrid inverter is suitable for 48V flooded and sealed GEL/AGM lead-acid and lithium batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries. Please note that in order to enable the solar charging or direct operation of the loads from solar panels, your solar array must meet the minimum MPPT input voltage requirement of the inverter of 120V (several solar panels connected in series). Inverter specifications: Nominal battery voltage: 48V Continuous power output: 6000W/6000VA (220-240V AC) Surge power: 12000VA Output frequency: 50Hz - 60Hz Output waveform: Pure sine wave Maximum solar input power: 6000W Maximum solar input current: 27A Maximum open circuit solar input voltage: 500V (open circuit) MPPT operating solar voltage: 120 - 430 V Maximum solar charging current: 120A Maximum mains AC charging current: 120A Maximum combined charging current: 120A Peak efficiency: 92% Operating temperature: -10°C to 50°C Supplied with USB drive, PC connection cable and PC software CD Size: 140 x 295 x 468 mm Weight: 12 kg

...Read more View Product

£1,889.99

Iconica Max 11000W 48V Hybrid Solar Inverter With 11000W Solar Input, Dual-Input 110A 500V Mppt, 150A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica MAX 11000W 48V hybrid inverter intelligently combines the functions of an 11000W pure sine wave inverter, 110A MPPT solar charge controller with two independent inputs and an extremely powerful 150A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This inverter features the rare and unique ability to power AC appliances without connection to a battery - directly from solar power.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent, or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g., remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 11000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 11000VA of continuous power with a strong peak power handling capability of up to 22000VA (to start powerful appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 11000W high solar input MPPT Solar charge controller: Two independent solar inputs can each accept up to 5500W of solar power. The MPPT charge controller regulates the input from the solar panels and charges the batteries at up to 110A, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. Advanced MPPT technology extracts the maximum possible output from the solar panels and operates at up to 98% efficiency. This inverter is therefore well-suited to systems with large and powerful solar arrays, or two solar arrays with different panels or light conditions. Performance data for the solar arrays is displayed on the LCD screen.3. Enhanced 150A Smart battery charger: Designed to enable safe, efficient, and fast (up to 150A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 5 further inverters), offering the possibility of large-scale system expansion, with up to 66KW of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately). Additional intelligent features:The Iconica MAX 11000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Load power without a battery: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. By powering loads using the energy directly supplied from the solar panels, this Iconica inverter offers a uniquely independent and versatile power system, free from batteries if preferred. Removing the need for batteries also increases the efficiency of the energy generated from the solar array by reducing the power losses that this transfer of energy would usually cause. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. For example, if 4000W of solar power is flowing into the inverter, 2000W can be used to run appliances whilst the remaining 2000W will be used for charging the battery bank. - Output source priority: This intelligent feature allows the user to set output source preferences (solar/battery power/mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g., which source of energy is given priority for the AC output if solar power is insufficient/if battery voltage is too low/if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/using a combination of solar power and mains power/from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated removable LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc. The LCD display is removable and can be positioned up to 20m away from the inverter for remote system monitoring (requires additional basic RJ45 connection cable – not included). - Customisable RGB light bar: LED indicator strip across the front of the inverter can be programmed to show battery charge level or solar/mains/battery input in customisable colours, allowing you to easily see the system status at a glance.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/battery/AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/Excel formats from the PC software. This inverter also has the potential to send data to a mobile app using the built-in wi-fi kit, or to an online user portal a Wi-Fi connection kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email/push notification/SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1, 2 or 3 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 48V flooded, sealed GEL/AGM lead-acid and Lithium batteries with pre-defined charging programs (consult the battery supplier for advice on Lithium battery charging settings). A user-defined battery type with numerous customisable settings is also available for charging other battery types. Inverter specifications: Nominal battery voltage: 48V Continuous power output: 11000W/11000VA (220-240V AC) Surge power: 22000VA Output frequency: 50/60Hz Output waveform: Pure sine wave Maximum solar input power: 5500W per input (11000W total) Maximum solar input current: 18A per input Maximum open circuit solar input voltage: 500V (open circuit) MPPT solar operating voltage: 90V - 450V Maximum solar charging current: 110A Maximum mains AC charging current: 150A Maximum combined charging current: 150A Peak efficiency: 93% Operating temperature: -10°C to 50°C Supplied with solar connectors, cable glands, PC connection cable and PC Software Size: 147.4 x 432.5 x 553.6 mm Weight: 18.4 kg

...Read more View Product

Out of Stock

£1,399.00

Victron Energy Phoenix Inverter 24V 5000VA Smart – PIN242500000

The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems. It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave. Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish. Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect. Features Bluetooth built-in: fully configurable with a tablet or smartphone Low battery voltage alarm Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Alarm relay Monitoring: In- and output voltage, load and alarms VE.Direct communication port The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters. Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch. Brand Victron Energy Manufacturer Part Number PIN242500000 GTIN 8719076047933 Voltage 24V Cont. Output Power at 25°C 5000VA Peak Power 10000W Output AC Voltage 230V Protection Category IP21 Efficiency 95% Bluetooth Enabled Yes Dimensions H595 x W295 x D160mm Weight 29Kg Warranty 5 Years Country of Manufacture India

£999.00

Sterling Power Pro Combi S Pure Sine Wave Inverter 12V 2500W – PCS122500

The new Pro Combi range is designed to be very competitive, no frills, high performance, and value for money products, presented in a simple, easy to install and use style.If you require power assist, parallel connection, three phase output functions or any other enhanced combi features then this range is not for you. If you’re not familiar with these things this ProCombi is perfect for you. Modern combis are getting more and more complex, with each company trying to out do the next with abilities beyond the understanding and requirements of most people. This detracts from the combi’s main strength of being easy to install and easy to use. There is, no doubt, a market for the advanced functions but the vast majority of combi users simply do not need them and never will. Most people simply require the unit to act as a high performance constant current battery charger when on mains power then cross over to act as an efficient inverter when on battery – and that’s it!The problem with enhanced functions is, even if they are not used, they eat up valuable power. The more functions on a product running (even though you do not use them) the higher the quiescent current on the inverter (the current the unit uses itself to operate). Complex combis at 12V can use as much as 9.5 A, whereas, Pro Combi can use as little as 2A. Also, a lot of the expensive combis do not even have a power save function which can drop the combi power consumption to as little as 0.2A when off load, some combis continue to consume 2A + even when there is no load.Sterling has reversed this trend with this Pro Combi range by stripping away the unnecessary features from a complex combi saving money. The end result is a simple, straight forward product that does what you think it should. Using our years of experience in this market we have tailored the product range to suit 90% of people purchasing Combis. Features 30 amp through current P.F.C. (power factor correction) Includes remote control with 10m cable. 4 step progressive charging 8 battery type selector Charger only select option (on S models only) Earth – neutral link when on inverter mode to comply with latest regulations Brand Sterling Power Manufacturer Part Number PCS122500 Voltage 12 Power (W) 2500 Warranty 2 Years

...Read more View Product

£820.00

Victron Energy MultiPlus-II 48V 5000VA 70A 50A GX – PMP482506000

An Inverter/Charger with device networking built-in, the MultiPlus-II GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation. Capable of parallel operation for increased power output, or battery charge-rates, the MultiPlus-II GX can also be configured for three-phase supply. A host of advanced features – such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power – can all be controlled straight from your phone or smart device. Remote monitoring is also possible. Features A MultiPlus-II with LCD and GX functionality The MultiPlus-II GX integrates a MultiPlus-II inverter/charger and a GX device with a 2 x 16 character display. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. GX device The integrated GX device includes: A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port. A USB port. A Ethernet port. A VE.Direct port. Applications The MultiPlus-II GX is intended for applications where additional interfacing with other products and/or remote monitoring is required, such as on-grid or off-grid energy storage systems and certain mobile applications. Parallel and three phase operation Only one GX unit is needed in case of Parallel and three phase operation. Brand Victron Energy Manufacturer Part Number PMP482506000 GTIN 8719076048824 Voltage 48V Cont. Output Power at 25°C 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 70A Protection Category IP22 Efficiency 96% Bluetooth Compatible Yes Dimensions H506 x W275 x D147mm Weight 26Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£126.49

Victron Energy Phoenix Inverter 12V 375VA VE.Direct UK – PIN121371400

Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. Features VE.Direct communication port The VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number PIN123750400 GTIN 8719076034001 Voltage 12V Cont. Output Power at 25°C 375VA Peak Power 700W Output AC Voltage 230V Protection Category IP21 Efficiency 89% Bluetooth Enabled No Plug Type UK Dimensions H86 x W165 x D260mm Weight 3Kg Warranty 5 Years

...Read more View Product

£424.99

Stering 12v 1800w Inverter (Inc. Remote)

All Sterling inverters are continuously rated, with all the usual overload, over voltage and low voltage cut outs, all the inverters come with cable and 24 kt gold connectors, in order to prevent battery terminal corrosion. Available in 230V for UK and Europe and also 110V for building sites / off vehicle use or for equipment supplied on boats made in the USA (not suitable for washing machine / some bread makers). Thermostatically controlled fans Overload, overheat, short circuit protected Standby-current: Efficiency: 85%-95% Incl. battery cable (1m length) Weight: 4kg Socket Type: British / Euro Voltage DC: 12 Power (Continuous) Watts: 1800 Size L x W x D mm: 300 x 250 x 100 Instruction Manual PDF Product Information PDF

...Read more View Product

£69.99

Parallel Connection Kit For Iconica 48V 4000W / 5000W Kms Or Zt Series Hybrid Pure Sine Wave Inverters

This parallel connection kit includes all of the parts required for connecting multiple identical 48V Iconica inverters together in parallel. Compatible models include:Iconica 48V KMS series hybrid inverters starting at 4000W - such as Iconica 4000W 48V KMS series inverters or Iconica 5000W 48V KMS series invertersIconica 48V Zero Transfer ZT series hybrid inverters - such as Iconica 5000W 48V ZT series invertersThe kit includes:1 x Circuit board1 x Communication cable1 x Current sharing cable A maximum of nine Iconica KMS or ZT series inverters can be connected together to increase the total system power handling capability. Once connected in parallel, the inverters can be set to either single phase or three phase operation mode, typically used for running industrial equipment.This parallel kit is suitable for linking identical Iconica 48V 4000W-5000W KMS series inverters OR Iconica 48V ZT series inverters in parallel. Please note this kit is not compatible with any other inverter from the Iconica range.Connection of additional inverters is very simple and full instructions can be found in the detailed user manual supplied with this parallel connection kit.Please note: One parallel connection kit is required per Iconica inverter. For example, if connecting two inverters together, two connection kits are required.Specifications:Compatible with identical 48V KMS series Iconica Hybrid inverters (4000W or 5000W) or Iconica 48V ZT series inverters 1 x circuit board1 x communication cable1 x current sharing cable

...Read more View Product

£939.99

Iconica 5000W 48V Off Grid Inverter With Zero Transfer, 4000W Solar Input, 80A Mppt, 60A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. Please note this is a 48V system. The Iconica 5000W 48V hybrid inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A MPPT solar charge controller and a 60A smart battery charger in one single unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its hybrid capability, this innovative inverter features zero transfer time which enables instant 0ms transfer from mains to battery mode when the mains power is interrupted . In addition the inverter has advanced communication functions including inbuilt Bluetooth, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features a zero transfer time Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts, and cabins or narrowboats, yachts etc), IT systems requiring continuous operation in case of power failures, as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 5000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 5000W of continuous power with a strong peak power handling capability of up to 10000VA (to start appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 80A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.3. Enhanced 60A Smart battery charger: Designed to enable safe, efficient and fast (up to 60A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. UPS zero transfer time: Offers instant 0ms transfer from mains to battery mode when mains power is interrupted (normal speed of transfer for other inverters is 15-20ms). This improved UPS functionality allows critical IT loads such as computers and servers to operate continuously in case of power failures.5. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 8 further inverters), offering the possibility of large scale system expansion, with up to 45kW of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately). 6. Inbuilt Bluetooth connectivity: The integrated Bluetooth function allows the inverter to be monitored remotely via the Watchpower mobile app - a free mobile app available for Android devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc.Additional intelligent features:The Iconica 5000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated removable LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc. The LCD display is removable and can be positioned up to 20m away from the inverter for remote system monitoring (requires additional basic RJ45 connection cable – not included). - Advanced communication options: In addition to the integrated Bluetooth feature, this inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- USB On-the-Go function: The inverter is supplied with a USB drive which allows the user to facilitate upload/ download of system data.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.Compatibility:This hybrid inverter is suitable for 48V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.Please note that in order to enable the solar charging or direct operation of the loads from solar panels, your solar array must meet the minimum MPPT input voltage requirement of the inverter of 60V (several solar panels connected in series). Inverter specifications: Nominal battery voltage: 48V Continuous power output: 5000W/5000VA (220-240V AC) Surge power: 10000VA Output frequency: 50Hz - 60Hz Output waveform: Pure sine wave Maximum solar input power: 4000W Maximum open circuit solar input voltage: 145V (open circuit) MPPT operating solar voltage: 60 - 115 V Maximum solar charging current: 80A Maximum mains AC charging current: 60A Maximum combined charging current: 140A Peak efficiency: 93% Solar / AC charger max efficiency: 98% Operating temperature: 0°C to 55°C Supplied with USB drive, PC connection cable and PC software CD Size: 52.5 x 30.3 x 14 cm Weight: 13.5 kg

...Read more View Product

Out of Stock

£878.99

Iconica 5000W 48V Hybrid Off Grid Inverter With 80A Mppt & 80A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. Please note this is a 48V system. The Iconica 5000W 48V hybrid inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A MPPT solar charge controller and a 60A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This inverter features the rare and unique ability to power AC appliances without connection to a battery - directly from solar power.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 5000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 5000VA of continuous power with a strong peak power handling capability of up to 10000VA (to start powerful appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 4500W high solar input MPPT Solar charge controller: Regulates the input from the solar panels to the batteries, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. Advanced MPPT technology extracts the maximum possible output from the solar panels and operates at up to 98% efficiency. This inverter is therefore well-suited to systems with a large and powerful solar array, with a maximum allowed solar input of 4000W. Performance data for the solar array is displayed on the LCD screen. 3. Enhanced 80A Smart battery charger: Designed to enable safe, efficient and fast (up to 80A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 8 further inverters), offering the possibility of large scale system expansion, with up to 45kw of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately).Additional intelligent features:The Iconica 5000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Load power without a battery: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. By powering loads using the energy directly supplied from the solar panels, this Iconica inverter offers a uniquely independent and versatile power system, free from batteries if preferred. Removing the need for batteries also increases the efficiency of the energy generated from the solar array by reducing the power losses that this transfer of energy would usually cause. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. For example, if 4000W of solar power is flowing into the inverter, 2000W can be used to run appliances whilst the remaining 2000W will be used for charging the battery bank. - Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 48V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.If you are unsure whether 5000W is enough for your appliances, please refer to the following table: Table of typical power consumption of domestic appliances.Inverter specifications:Nominal battery voltage: 48VContinuous power output: 5000W / 5000VA (220-240V AC)Surge power: 10000VAOutput frequency: 50Hz /60 HzOutput waveform: Pure sine waveMaximum solar input power: 4500WMaximum open circuit solar input voltage: 450VSolar MPPT operating voltage: 120-430V DCMaximum Input Current: 18AMaximum solar charging current: 80AMaximum mains AC charging current: 80AMaximum combined charging current: 80APeak efficiency: 93%Solar / AC charger max efficiency: 98%Operating temperature: -10°C to 50°CSupplied with a PC connection cable and PC software CDParalleled operation with up to 8 further units, using a parallel connection kit(s)Size: 120 x 295 x 468 mmWeight: 11 kg The product is covered by a 1 year manufacturer warranty.

Best Seller

£1,171.00

Victron Energy MultiPlus 12v Inverter Charger 12/3000/120-16 VE.Bus – PMP122300001

Victron Energy MultiPlus 12v Inverter Charger 12/3000/120-16 VE.Bus – PMP122300001 The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Brand Victron Energy Manufacturer Part Number PMP122300001 Voltage 12 Transfer Switch (A) 50 Cont. Output Power at 25°C (VA) 3000 Peak Power (W) 6000 Max Efficiency 93% Zero Load Power (W) 20 Charge Current House Battery (A) 120 Charge Current Starter Battery (A) 4 Battery Temperature Sensor Yes Programmable Relay Yes (3x) Remote on-off Yes Protection Category IP21 Dimensions H362 x W258 x D218mm Weight (kg) 19 Warranty 5 Years Country of Manufacture India

...Read more View Product

£749.00

Victron Energy Phoenix Inverter 24/3000 230V SMART PIN242300000

Victron Phoenix Inverter 24/3000 Smart (PIN242300000) – Pure Sine Wave The Victron Phoenix Inverter 24/3000 Smart is a powerful and intelligent pure sine wave inverter designed to convert 24V DC battery power into 230V AC electricity — perfect for off-grid and mobile applications where reliability is crucial. Whether you’re powering sensitive electronics in a motorhome, boat, tiny house, or solar energy system, the Phoenix 24/3000 Smart delivers dependable, clean energy exactly when and where you need it. Key Features of the Victron Phoenix Inverter 24V 3000VA Smart: Pure Sine Wave Output: Ensures stable and clean AC power, ideal for sensitive electronics like computers, LED lights, and medical devices. 3,000VA Power Capacity: Powerful enough to handle most common appliances in homes, RVs, boats, and caravans, from kitchen appliances to power tools. Bluetooth Connectivity: Fully configurable using the VictronConnect app on your smartphone or tablet. Monitor and adjust settings such as: Low battery voltage alarm Low battery cut-off/restart levels Dynamic cut-off based on load conditions Output voltage (210-245V) and frequency (50Hz or 60Hz) ECO mode on/off and sense level adjustments Alarm relay settings VE.Direct Communication Port: For advanced monitoring and configuration, the VE.Direct port can be connected to a computer using the VE.Direct to USB interface for further customisation and real-time data. Proven Reliability and Advanced Design The Victron Phoenix Inverter incorporates a full bridge plus toroidal transformer topology, providing excellent performance and proven reliability. This design makes the inverter short-circuit proof and protects it from overheating, even under heavy loads or high ambient temperatures. The high start-up power capability allows it to start demanding appliances such as power converters, LED lamps, and electric tools. ECO Mode for Energy Efficiency In ECO mode, the inverter enters standby when the load falls below a preset threshold, conserving energy by switching on only for brief periods every 2.5 seconds to check the load. When demand exceeds the threshold, the inverter remains active, ensuring efficient energy use while extending battery life. Remote On/Off and LED Diagnosis The inverter supports a remote on/off switch or relay connection for easy control from a distance. Additionally, LED diagnosis provides real-time system status, ensuring you stay informed about any system issues (refer to the manual for more details). Seamless AC Switching with Filax or MultiPlus For uninterrupted power supply, Victron recommends the Filax Automatic Transfer Switch, which ensures minimal switchover time (less than 20 milliseconds) to maintain power continuity for sensitive equipment like computers. Alternatively, use the MultiPlus inverter with its built-in transfer switch for seamless power transitions between different AC sources. Benefits of the Victron Phoenix Inverter 24/3000 Smart: Powerful and Flexible: Handles a wide range of loads, making it ideal for off-grid, mobile, or backup applications. Energy Savings: With ECO mode and dynamic cut-off features, the inverter optimises energy use, reducing costs and extending battery life. Remote Control and Monitoring: Configure and monitor the system with Bluetooth or via a computer using VE.Direct. Input voltage range: 18.6-34 VDC Output voltage: 230VAC +/- 2% Continuous AC power at 25ºC: 3000VA Continuous power at 25ºC/40ºC/65ºC: 2400/2200/1700W Peak power: 6000VA Dynamic (load dependent) DC low shut down: Fully configurable Max. efficiency: 92% No-load power consumption: 13W Default zero load power in ECO mode: 1.9W Operating temperature: -40ºC to +65ºC (fan assisted cooling) Stop & start power ECO-mode: Adjustable DC (battery) cable connection: 2+2 M8 bolts 230V AC cable connection: Screw terminals Ingress Protection rating: IP21 Weight: 19kg Overall dimensions: 485 (L) x 285(W) x 150mm (H)

...Read more View Product

£89.99

300W 12V Pure Sine Inverter (UK Socket), with USB port

A power inverter is a device which converts battery output (DC, or direct current) into 230V AC mains electricity (alternating current). 230V AC is the type of electricity supplied by utility companies to run standard domestic appliances such as a TV, fridge, radio, lights or to charge a laptop / mobile phone etc. If you have a battery, connecting a power inverter will enable you to power household appliances in areas with no access to mains electricity; such as in a motorhome, caravan, boat, farm or any other remote location. Inverters are also perfect for off-grid and back up systems for accidental power cuts. This is a 300W 12V pure sine wave power inverter which can generate 300W of continuous power and up to 600W of power at peak times (peak time reserve capacity is useful if more energy is required to start an appliance than for its continuous running). This is a pure sine wave type of inverter, which means that the 230V AC output harmonically follows a smooth sine wave and is almost identical to normal mains electricity. Pure sine wave output is far superior than square sine wave or modified sine wave output for running appliances. This is because: It is suitable for a broader range of appliances (for example, appliances with electric motors can not be powered by modified sine wave inverters) It is more efficient compared to modified sine wave inverters. This product comes with important protection and safety features, such as over-discharge, overload, overheating and short-circuit automatic shutdown. The inverter also features a powerful USB port for faster charging of mobile phones, MP3 players and other USB-compatible devices (2.1A). This item is also supplied with 0.5m battery cables (6mm2 cross section). Specifications: Continuous power: 300W Surge power: 600W (1/2 second) Input: 12V (10-15V) DC Output: 230V AC Output frequency: 50 Hz Output waveform: pure sine wave THD: < 3% Peak efficiency: 90% Low battery shut down: 9.7V - 10.0V DC Low battery alarm: 10.0V - 10.5V DC High voltage shut down: 15.0V +/- 0.5V DC Includes 0.5m battery cables (6mm2 cross section) Size: 21.5 x 15 x 6 cm Weight: 1.4kg

...Read more View Product

Out of Stock

£339.99

3000W 12V Pure Sine Wave Power Inverter With On/Off Remote Control

A power inverter is a device which converts battery output (DC, or direct current) into 230V AC mains electricity (alternating current). 230V AC is the type of electricity supplied by utility companies to run standard domestic appliances such as a TV, fridge, radio, lights or to charge a laptop / mobile phone etc. If you have a battery, connecting a power inverter will enable you to power household appliances in areas with no access to mains electricity; such as in a motorhome, caravan, boat, farm or any other remote location. Inverters are also perfect for off-grid and back up systems for accidental power cuts. This is a pure sine wave type of inverter, which means that the 230V AC output harmonically follows a smooth sine wave and is almost identical to normal mains electricity. Pure sine wave output is far superior than square sine wave or modified sine wave output for running appliances. This is because: - It is suitable for a broader range of appliances (for example, appliances with electric motors can not be powered by modified sine wave inverters)- It is more efficient compared to modified sine wave inverters. This 3000W 12V pure sine wave power inverter can generate 3000W of continuous power and up to 4000W of power at peak times (peak time reserve capacity is useful if more energy is required to start an appliance than for its continuous running). This product comes with important protection and safety features, such as over-discharge, overload, overheating and short-circuit automatic shutdown. In addition, the inverter has a USB port for powering USB-compatible devices (e.g. mobile phones, tablets, laptops, MP3 players etc.) and is also supplied with a wireless On/Off remote control (max. 50m radius). Specifications: Input: 12V (10-15V) DC Output: 220-240V AC Output frequency: 50 Hz Output waveform: pure sine wave THD: < 3% Continuous power: 2000W Surge power: 4000W Peak efficiency: 90% Low battery shut down: 10.0V +/- 0.5V DC Low battery alarm: 10.5V +/- 0.5V DC High voltage shut down: 15.5V +/- 0.5V DC Thermal shut down: 60 +/-5°C Rated USB output: 2A Wireless remote control radius: Approx. 50m Size (inc. terminals): 390 x 220 x 95 mm Weight: 5.0 kg

Out of Stock

£169.99

1000W 12V Pure Sine Wave Power Inverter With On/Off Remote Control

A power inverter is a device which converts battery output (DC, or direct current) into 230V AC mains electricity (alternating current). 230V AC is the type of electricity supplied by utility companies to run standard domestic appliances such as a TV, fridge, radio, lights or to charge a laptop / mobile phone etc. If you have a battery, connecting a power inverter will enable you to power household appliances in areas with no access to mains electricity; such as in a motorhome, caravan, boat, farm or any other remote location. Inverters are also perfect for off-grid and back up systems for accidental power cuts. This is a pure sine wave type of inverter, which means that the 230V AC output harmonically follows a smooth sine wave and is almost identical to normal mains electricity. Pure sine wave output is far superior than square sine wave or modified sine wave output for running appliances. This is because: - It is suitable for a broader range of appliances (for example, appliances with electric motors can not be powered by modified sine wave inverters)- It is more efficient compared to modified sine wave inverters. This 1000W 12V pure sine wave power inverter can generate 1000W of continuous power and up to 2000W of power at peak times (peak time reserve capacity is useful if more energy is required to start an appliance than for its continuous running). This product comes with important protection and safety features, such as over-discharge, overload, overheating and short-circuit automatic shutdown. In addition, the inverter has a USB port for powering USB-compatible devices (e.g. mobile phones, tablets, laptops, MP3 players etc.) and is also supplied with a wireless On/Off remote control (max. 50m radius). Specifications: Input: 12V (10-15V) DC Output: 230-240V AC Output frequency: 50 Hz Output waveform: pure sine wave THD: < 3% Continuous power: 1000W Surge power: 2000W Peak efficiency: 90% Low battery shut down: 10.0V +/- 0.5V DC Low battery alarm: 10.5V +/- 0.5V DC High voltage shut down: 15.5V +/- 0.5V DC Thermal shut down: 60 +/-5°C Rated USB output: 2A Wireless remote control radius: Approx. 50m Size: 325 x 220 x 95 mm Weight: 2.7 kg

Out of Stock

£479.99

Renogy 3000W 12V Pure Sine Wave Inverter Charger w/ LCD

Renogy 3000W 12V Pure Sine Wave Inverter Charger w/ LCD The Renogy 3000W Pure Sine Wave Inverter Charger can be used for multiple applications when going off-grid. The Renogy 3000w inverter charger can also charge and maintain a battery bank when connected to shore power and is now compatible with Lithium batteries. With a low transfer time, power remains uninterrupted when switching from solar to shore power, creating clean and silent energy without having to worry about losing access to connected devices and appliances. The Renogy 3000W Pure Sine Wave Inverter Charger is a perfect back-up power source! Robust and sleek design LCD and LED display used to view inverter status and programming features Offers high quality waveform with little harmonic distortion 4-Stage battery charger with configurable charging current 8 Pre-Set battery voltages including Lithium; User-defined option available Automatic generator start option Peak efficiency >90% ETL listed with multiple electronic protections Inverter Charger Specification Rated output power: 3000W Surge Power (1 second): 9000W Nominal Output Voltage RMS: 230VAC (200~240VAC, 10V interval) Output Frequency (Nominal): 50/60 Hz Input Voltage Range: 10~16 VDC Output Wave form: Pure Sine Wave Nominal Efficiency: > 90% Peak No Load Power Consumption: Normal: <30W; Power Saving: <15W Battery Types: GEL, AGM, SLA, FLD, CAL, LI, USER Operating Temperature: 0 ~ 40°C / 32 ~ 104°F Dimensions: 20.1 x 9.7 x 7.6 in / 510 x 248 x 193 mm Weight: 63.5 lbs / 28.8 Kg Output Current: 5-75A; configurable, 5A intervals Optimal Efficiency: >85% Nominal Input Voltage: 120/230 VAC Input Voltage Range: 90-138/155-275 VAC Input Frenquency Range: 40Hz - 70Hz Input Wave Form: Sine Wave (Utility or Generator) Transfer Time: ~ 10ms Transfer Rating: 3 Legs @ 40A each (277VAC) WARRANTY INFORMATION Inverters 2-year material and workmanship warranty

£859.99

NDS Energy Smart-In Pure Sine Wave Inverter 12V 3000W - SP3000-12

Currently 7 Day Lead Time on this product. SMART-IN PURE with IVT function is a line of inverters with an integrated system of priority (Priority Switch type). This special IVT function, through the two input and output 230V sockets, allows the management of the voltage that comes out from the inverter connected to the battery and to the external mains When the electronic network is available is connected to the external grid, it will have the priority in order to preserve the battery; otherwise, when the main is disconnected, the inverter use the battery to supply the 230V. Distinctive Features: By-pass integrated function Relay time change from inverter 230 VAC to external main= 20 ms Relay time change from 230 VAC external main to inverter = 100 ms What is the IVT function? More frequently, the inverter is the only solution for powering loads in the vehicle, but its dimensions and power (above 1000W) make it impractical to move as required. The IVT function is a priority system that allows the inverter to automatically power itself from the 230V mains, when available, and return to using the battery when necessary. This function makes it possible to safely connect the inverter output to the vehicle’s electrical circuit, so as to always have all the sockets powered, leaving the inverter conveniently installed near the leisure battery Input Voltage 12V Continuous Power 3000W Peak Power 8000W Output Voltage 230Vac Cables Included 35mm2 lung. 80cm Dimensions L450 x W270 x D108mm Warranty 2 Years Datasheet NDS Energy Smart-In Pure Sine Wave Inverter 12V 3000W - SP3000-12

...Read more View Product

£149.99

NDS Energy Smart-In Pure Sine Wave Inverter 12V 400W - SP400-12

SMART-IN PURE with IVT function is a line of inverters with an integrated system of priority (Priority Switch type). This special IVT function, through the two input and output 230V sockets, allows the management of the voltage that comes out from the inverter connected to the battery and to the external mains When the electronic network is available is connected to the external grid, it will have the priority in order to preserve the battery; otherwise, when the main is disconnected, the inverter use the battery to supply the 230V. Distinctive Features: By-pass integrated function Relay time change from inverter 230 VAC to external main= 20 ms Relay time change from 230 VAC external main to inverter = 100 ms What is the IVT function? More frequently, the inverter is the only solution for powering loads in the vehicle, but its dimensions and power (above 1000W) make it impractical to move as required. The IVT function is a priority system that allows the inverter to automatically power itself from the 230V mains, when available, and return to using the battery when necessary. This function makes it possible to safely connect the inverter output to the vehicle’s electrical circuit, so as to always have all the sockets powered, leaving the inverter conveniently installed near the leisure battery Input Voltage 12V Continuous Power 400W Peak Power 1000W Output Voltage 230Vac Cables Included 6mm2 Long 80cm Dimensions 215.5 x W140 x D70mm Warranty 2 Years Datasheet NDS Energy Smart-In Pure Sine Wave Inverter 12V 400W - SP400-12

...Read more View Product

£445.00

Victron Energy MultiPlus 24/1200/25-16 230V – PMP242120000

The new style Victron Energy MultiPlus 24/1200 Inverter Charger is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Features of the MultiPlus 24/1200 Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backupgenerator and more…” Parallel Operation and Three Phase CapabilityUp to six Multis can operate in parallel to achieve higher power output.In addition to parallel connection, three units can be configured for three-phase output PowerAssist – Boosting the Capacity of Shore or Generator PowerThis feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Want to have perfect control over your system from wherever you are whilst using your MultiPlus 24/1200, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Brand Victron Energy Manufacturer Part Number PMP242120000 GTIN 8719076039327 Voltage 24V Cont. Output Power at 25°C 1200VA Peak Power 2400W Output AC Voltage 230V Transfer Switch 16A Charge Current House Battery 25A Charge Current Starter Battery 1A Protection Category IP21 Efficiency 94% Bluetooth Compatible No Dimensions H406 x W250 x D100mm Weight 8.2Kg Warranty 5 Years Country of Manufacture China

...Read more View Product

£1,550.00

Victron Energy EasySolar-II 48/5000/70-50 MPPT 250/100 GX – PMP482507010

The EasySolar-II 48/5000 GX combines an MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure. The product is easy to install, with a minimum of wiring. Features of the EasySolar-II 48/5000 GX The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: A MultiPlus-II inverter/charger A SmartSolar MPPT -Tr solar charge controller A GX device with a 2 x 16-character display. These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be u sed to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device The integrated GX device on the EasySolar-II includes: A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port. A USB port An Ethernet port A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection. Control over system Want to have perfect control over your system from wherever you are whilst using your EasySolar-II 48/5000 GX, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Brand Victron Energy Manufacturer Part Number PMP482507010 GTIN 8719076049333 Voltage 48V Cont. Output Power at 25°C 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 70A Protection Category IP21 Efficiency 96% Bluetooth Compatible Yes Dimensions H604 x W323 x D253mm Weight 38.6Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£939.99

Iconica 5000W 48V Solar Inverter With Zero Transfer, 6000W Solar Input, 120A Mppt, 100A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica 5000W 48V hybrid inverter intelligently combines the functions of a 5000W pure sine wave inverter, 120A MPPT solar charge controller and a 100A smart battery charger in one single unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its hybrid capability, this innovative inverter features zero transfer time which enables instant 0ms transfer from mains to battery mode when the mains power is interrupted . In addition the inverter has advanced communication functions including inbuilt Wi-Fi, along with a menu full of highly customisable settings. This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features a zero transfer time Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts, and cabins or narrowboats, yachts etc), IT systems requiring continuous operation in case of power failures, as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts. Key functions: 1. 5000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 5000W of continuous power with a strong peak power handling capability of up to 10000VA (to start appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 120A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 100A Smart battery charger: Designed to enable safe, efficient and fast (up to 100A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages. 4. UPS zero transfer time: Offers instant 0ms transfer from mains to battery mode when mains power is interrupted (normal speed of transfer for other inverters is 15-20ms). This improved UPS functionality allows critical IT loads such as computers and servers to operate continuously in case of power failures. 5. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 8 further inverters), offering the possibility of large scale system expansion, with up to 45kW/45kVA of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately). 6. Inbuilt Wi-Fi connectivity: The integrated Wi-Fi function allows the inverter to be monitored remotely via the Watchpower mobile app - a free mobile app available for Android and iOS devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc. Additional intelligent features: The Iconica 5000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include: - Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc. - Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc. - A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - Illuminated removable LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc. The LCD display is removable and can be positioned up to 20m away from the inverter for remote system monitoring (requires additional basic RJ45 connection cable – not included). - Advanced communication options: In addition to the integrated Wi-Fi feature, this inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification for the inverter, remote system monitoring from any location and much more. - USB On-the-Go function: The inverter is supplied with a USB drive which allows the user to facilitate upload/ download of system data. - Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level. - Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. Compatibility: This hybrid inverter is suitable for 48V flooded and sealed GEL/AGM lead-acid and lithium batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries. Please note that in order to enable the solar charging or direct operation of the loads from solar panels, your solar array must meet the minimum MPPT input voltage requirement of the inverter of 120V (several solar panels connected in series). Inverter specifications: Nominal battery voltage: 48V Continuous power output: 5000W/5000VA (220-240V AC) Surge power: 10000VA Output frequency: 50Hz - 60Hz Output waveform: Pure sine wave Maximum solar input power: 6000W Maximum open circuit solar input voltage: 500V (open circuit) MPPT operating solar voltage: 120 - 430 V Maximum solar charging current: 27A Maximum mains AC charging current: 100A Maximum combined charging current: 100A Peak efficiency: 92% Operating temperature: -10°C to 50°C Supplied with USB drive, PC connection cable and PC software CD Size: 140 x 295 x 468 mm Weight: 12 kg IC2-ZT5000-48 User Manual IC2-ZT5000-48 User Manual IC2-ZT5000-48 Datasheet IC2-ZT5000-48 Datasheet

...Read more View Product

£109.99

Wi-Fi Mobile App Monitoring Module For Iconica Hybrid Inverters (For Android / Apple Ios Mobile Devices)

This intelligent Wi-Fi remote monitoring module uses Wi-Fi connectivity to enable advanced remote monitoring of an Iconica hybrid inverter from an Android or iOS mobile device. With simple set-up and strong magnets to allow the module to be securely attached to the side of the inverter or any other magnetic surface, this wi-fi module is the easiest way to remotely monitor your UPS or solar power system.The Wi-Fi module collects data from the Iconica inverter and transmits it to the user by connecting to an existing broadband network, where inverter data is transmitted to an online server, enabling the user to view data through the app from any location with an internet connection.The Watchpower app will show the inverter status, allow settings to be changed, and give notifications in the event of any alarms or warnings from the inverter such as low battery voltage. Download the Watchpower app from the Apple app store or the Watchpower Wi-Fi app from the Google Play store.Additionally required:Broadband networkCommunications cable (typically included with the inverter)Android 5.0 or above / Apple iOS 9.0 or above mobile device with Wi-Fi connectivity. Online data portal:This Wi-Fi module intelligently communicates with an Iconica inverter to transmit data to the online portal. After registering the wi-fi module to the app and connecting it to an existing broadband network, the app can then access inverter data and settings from anywhere in the world. Options for remote monitoring include:- Live in-depth data monitoring: View up-to-date system information (refreshed every 5 minutes) including: PV input voltage, battery voltage, charging current, grid voltage, AC output power, output load percentage, total AC output (in VA or as a percentage value), nominal rated input voltage / output voltage and frequency / battery voltage.- Detailed datalogs: Historical system data and alarm history is recorded and stored indefinitely. It is available to view for any given date range over the inverter's lifespan. The specific time and dates of each recorded value / alarm event are also displayed.- 3D infographics and diagrams: A system status diagram illustrates all connected system components (solar panel, load, battery. For certain Iconica models, bar charts display total generated power (hourly, daily, monthly or annual data).Compatibility:This Wi-Fi remote monitoring module is designed for use with Iconica hybrid inverters only. It is not suitable for use with any other inverter. This module is compatible with most Iconica hybrid inverters with the following exceptions:ICV-BM3000-24IC-KMS5000-24IC-KMS3000-48PICGT-IFS5500-48The wi-fi module cannot be used with the above models of Iconica hybrid inverter. Specifications:Compatible with Iconica hybrid inverters, excluding: ICV-BM3000-24, IC-KMS5000-24, IC-KMS3000-48P, ICGT-IFS5500-48Wi-Fi module dimensions (excluding antenna): 115 x 70 x 26 mmAntenna length: 80mmWi-Fi module weight (including antenna): 110g

...Read more View Product

£309.00

Victron Phoenix Inverter 24/1200 230V VE.Direct UK PIN242121400

Victron Phoenix Inverter 24/1200 230V VE.Direct UK (PIN242121400) Victron Energy Phoenix Inverter 24/1200 230V VE.Direct UK Inverters allow you to power domestic equipment – requiring 230V/120V AC – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. VE.Direct communication port The VE.Direct port can be connected to: – A computer (VE.Direct to USB interface cable needed)– Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable – Low battery voltage alarm trip and reset levels– Low battery voltage cut-off and restart levels– Dynamic cut-off: load dependent cut-off level– Output voltage 210 – 245V– Frequency 50 Hz or 60 Hz– ECO mode on/off and ECO mode sense level Monitoring – In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. LED diagnosis Please see manual for a description. To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. WEIGHT 7.4 kg DIMENSIONS 117 × 232 × 327 mm BRAND Victron Energy COLOUR Blue COUNTRY OF ORIGIN China GLOBAL IDENTIFIER (GTIN CODE) 8719076041399 INTRASTAT STATISTICAL CODE 85044084 MANUFACTURER Victron Energy QUANTITY PER MASTERBOX 4 QUANTITY PER PALLET 36 USA STATISTICAL CODE 8504.40.95-70 SKU PIN242120400 SIZE 117 x 232 x 327

...Read more View Product

Out of Stock

£1,099.00

Victron Energy Phoenix Inverter 48V 5000VA Smart – PIN482500000

The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA, 3000VA and 5000VA for 12, 24 or 48V systems. It’s powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave. Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish. Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect. Features Bluetooth built-in: fully configurable with a tablet or smartphone Low battery voltage alarm Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage: 210 – 245V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Alarm relay Monitoring: In- and output voltage, load and alarms VE.Direct communication port The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters. Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on. Remote on/off A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch. Brand Victron Energy Manufacturer Part Number PIN482500000 GTIN 8719076047940 Voltage 48V Cont. Output Power at 25°C 5000VA Peak Power 10000W Output AC Voltage 230V Protection Category IP21 Efficiency 96% Bluetooth Enabled Yes Dimensions H555 x W295 x D160mm Weight 28Kg Warranty 5 Years Country of Manufacture India

£670.00

Victron Energy Phoenix Inverter Compact 12V 2000VA VE.Bus – CIN122200000

The Phoenix Inverter Compact is a pure sine wave inverter with a high efficiency. It is developed for professional duty and suitable for the wide range of applications.The Phoenix Inverters Compact is available from 1200VA up to 2000VA in 12V or 24V. Features SinusMax – Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. Virtually unlimited power thanks to parallel and 3-phase operation capability Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible. To transfer the load to another AC source: the automatic transfer switch If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds). Communications interface These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control. Brand Victron Energy Manufacturer Part Number CIN122200000 GTIN 8719076037514 Voltage 12V Cont. Output Power at 25°C 2000VA Peak Power 4000W Output AC Voltage 230V Protection Category IP21 Efficiency 92% Bluetooth Enabled No Dimensions H520 x W255 x D125mm Weight 12Kg Warranty 5 Years

...Read more View Product

£69.99

Parallel Connection Kit For Iconica 24V Kms Or Zt Series Hybrid Pure Sine Wave Inverters

This parallel connection kit includes all of the parts required for connecting multiple identical Iconica 24V inverters together in parallel. Compatible models include:Iconica 24V KMS series hybrid inverters - such as Iconica 5000VA 24V KMS invertersIconica 24V Zero Transfer ZT series hybrid inverters - such as Iconica 3000W 24V invertersThe kit includes:1 x Circuit board1 x Communication cable1 x Current sharing cable A maximum of nine Iconica KMS or ZT series inverters can be connected together to increase the total system power handling capability. Once connected in parallel, the inverters can be set to either single phase or three phase operation mode, typically used for running industrial equipment.This parallel kit is suitable for linking identical Iconica 24V KMS series inverters OR Iconica 24V ZT series inverters in parallel. Please note this kit is not compatible with any other inverter from the Iconica range.Connection of additional inverters is very simple and full instructions can be found in the detailed user manual supplied with this parallel connection kit.Please note: One parallel connection kit is required per Iconica inverter. For example, if connecting two inverters together, two connection kits are required.Specifications:Compatible with identical 24V KMS series Iconica Hybrid inverters or Iconica 24V ZT series inverters1 x circuit board1 x communication cable1 x current sharing cable

...Read more View Product

£789.99

Iconica 5000Va 24V Hybrid Off Grid Solar Inverter With 80A Mppt, And 60A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. Please note this is a 24V system. The Iconica 5000VA 24V hybrid inverter intelligently combines the functions of a 5000VA pure sine wave inverter, 80A MPPT solar charge controller and a 60A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 5000VA 24V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 5000VA of continuous power with a strong peak power handling capability of up to 10000VA (to start powerful appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 80A MPPT Solar charge controller: Regulates the input from the solar panels to the batteries, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. Advanced MPPT technology extracts the maximum possible output from the solar panels and operates at up to 98% efficiency. This inverter is therefore well-suited to systems with a large and powerful solar array, with a maximum allowed solar input of 2000W. Performance data for the solar array is displayed on the LCD screen. 3. Enhanced 60A Smart battery charger: Designed to enable safe, efficient and fast (up to 60A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 8 further inverters), offering the possibility of large scale system expansion, with up to 45VA of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately).Additional intelligent features:The Iconica 5000VA 24V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit or 3G connection kit (purchased separately). By connecting via either of these two methods, the user will unlock access to exclusive features such as SMS / email status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 24V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.If you are unsure whether 5000VA (4000W) is enough for your appliances, please refer to the following table: Table of typical power consumption of domestic appliances.Inverter specifications:Nominal battery voltage: 24VContinuous power output: 4000W / 5000VA (220-240V AC)Surge power: 10000VAOutput frequency: 50Hz /60 HzOutput waveform: Pure sine waveMaximum solar input power: 2000WMaximum open circuit solar input voltage: 145VSolar MPPT operating voltage: 30-115V DCMaximum solar charging current: 80AMaximum mains AC charging current: 60AMaximum combined charging current: 140APeak efficiency: 90%Solar / AC charger max efficiency: 98%Operating temperature: 0°C to 55°CSupplied with a PC connection cable and PC software CDParalleled operation with up to 8 further units, using a parallel connection kit (s)Size: 180 x 310 x 475 mmWeight: 12.5 kg The product is covered by a 1 year manufacturer warranty

...Read more View Product

Out of Stock

£718.99

Iconica 4000W 48V Hybrid Off Grid Solar Inverter With 80A Mppt & 60A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. Please note this is a 48V system. The Iconica 4000W 48V hybrid inverter intelligently combines the functions of a 4000W pure sine wave inverter, 80A MPPT solar charge controller and a 60A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 4000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 4000VA of continuous power with a strong peak power handling capability of up to 8000VA (to start powerful appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 80A MPPT Solar charge controller: Regulates the input from the solar panels to the batteries, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. Advanced MPPT technology extracts the maximum possible output from the solar panels and operates at up to 98% efficiency. This inverter is therefore well-suited to systems with a large and powerful solar array, with a maximum allowed solar input of 4000W. Performance data for the solar array is displayed on the LCD screen. 3. Enhanced 60A Smart battery charger: Designed to enable safe, efficient and fast (up to 60A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 8 further inverters), offering the possibility of large scale system expansion, with up to 36kw of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately).Additional intelligent features:The Iconica 4000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 48V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.If you are unsure whether 4000W is enough for your appliances, please refer to the following table: Table of typical power consumption of domestic appliances.Inverter specifications:Nominal battery voltage: 48VContinuous power output: 4000W / 4000VA (220-240V AC)Surge power: 8000VAOutput frequency: 50Hz /60 HzOutput waveform: Pure sine waveMaximum solar input power: 4000WMaximum open circuit solar input voltage: 145VSolar MPPT operating voltage: 60-115V DCMaximum solar charging current: 80AMaximum mains AC charging current: 60AMaximum combined charging current: 140APeak efficiency: 93%Solar / AC charger max efficiency: 98%Operating temperature: 0°C to 55°CSupplied with a PC connection cable and PC software CDParalleled operation with up to 8 further units, using a parallel connection kit(s)Size: 120 x 295 x 468 mmWeight: 12.5 kg The product is covered by a 1 year manufacturer warranty

Out of Stock

£798.99

Iconica 5000W 48V Hybrid Off Grid Solar Inverter With 5000W Solar Input, 60A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. Please note this is a 48V System. The Iconica 5000W 48V hybrid inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A MPPT solar charge controller and a 60A smart battery charger in one single unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This inverter features the rare and unique ability to power AC appliances without connection to a battery - directly from solar power.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts, and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 5000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 5000W of continuous power with a strong peak power handling capability of up to 10,000VA (to start appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. The inverter is able to take power from solar panels directly for its operation, even if the battery is not available.2. Inbuilt 80A MPPT Solar charge controller with high input voltage of up to 500V DC: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.3. Enhanced 60A Smart battery charger: Designed to enable safe, efficient and fast (up to 60A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.Additional intelligent features:The Iconica 5000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Load power without a battery: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. By powering loads using the energy directly supplied from the solar panels, this Iconica inverter offers a uniquely independent and versatile power system, free from batteries if preferred. Removing the need for batteries also increases the efficiency of the energy generated from the solar array by reducing the power losses that this transfer of energy would usually cause. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. For example, if 4000W of solar power is flowing into the inverter, 2000W can be used to run appliances whilst the remaining 2000W will be used for charging the battery bank. - Simplified installation: The exceptionally high solar input voltage of this inverter of up to 500V DC allows the solar panels to be connected in series in one single chain. This eliminates the need for complicated multiple string connections, blocking diodes and expensive thick cables.- Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 48V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.Please note that in order to enable the solar charging or direct operation of the loads from solar panels, your solar array must meet the minimum MPPT input voltage requirement of the inverter of 120V (several solar panels connected in series). If you are unsure whether 5000W is enough for your appliances, please refer to the following table: Table of typical power consumption of domestic appliances.Inverter specifications:Nominal battery voltage: 48VContinuous power output: 5000W/5000VA (220-240V AC)Surge power: 10000VAOutput frequency: 50Hz /60 HzOutput waveform: Pure sine waveMaximum solar input power: 5000WMaximum open circuit solar input voltage: 500V (open circuit)MPPT solar operating voltage: 120V - 450VMaximum solar charging current: 80AMaximum mains AC charging current: 60AMaximum combined charging current: 80APeak efficiency: 93%Solar / AC charger max efficiency: 98%Operating temperature: -10C to 50CSupplied with PC connection cable and PC software CDSize: 44 x 30 x 10 cmWeight: 10 kg This product is covered by a 1 year manufacturer warranty

£694.99

Iconica 3000W 24V Off Grid Solar Inverter, 1500W Solar Input, 60A Mppt & 60A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. Please note this is a 24V system. The Iconica 3000W 24V hybrid inverter intelligently combines the functions of a 3000W pure sine wave inverter, 60A MPPT solar charge controller and a 60A smart battery charger in one single unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its hybrid capability, this innovative inverter features zero transfer time which enables instant 0ms transfer from mains to battery mode when the mains power is interrupted. In addition, the inverter has advanced communication functions including inbuilt Bluetooth, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features a zero transfer time Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts, and cabins or narrowboats, yachts etc), IT systems requiring continuous operation in case of power failures, as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 3000W 24V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 3000W of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 60A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.3. Enhanced 60A Smart battery charger: Designed to enable safe, efficient and fast (up to 60A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. UPS zero transfer time - Offers instant 0ms transfer from mains to battery mode when mains power is interrupted (normal speed of transfer for other inverters is 15-20ms). This improved UPS functionality allows critical IT loads such as computers and servers to operate continuously in case of power failures.5. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 8 further inverters), offering the possibility of large-scale system expansion, with up to 27kw of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately). 6. Inbuilt Bluetooth connectivity: The integrated Bluetooth function allows the inverter to be monitored remotely via the Watchpower mobile app - a free mobile app available for Android devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc.Additional intelligent features:The Iconica 3000W 24V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated removable LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc. The LCD display is removable and can be positioned up to 20m away from the inverter for remote system monitoring (requires additional basic RJ45 connection cable – not included). - Advanced communication options: In addition to the integrated Bluetooth feature, this inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- USB On-the-Go function: The inverter is supplied with a USB drive which allows the user to facilitate upload/ download of system data.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. Compatibility:This hybrid inverter is suitable for 24V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.Please note that in order to enable the solar charging or direct operation of the loads from solar panels, your solar array must meet the minimum MPPT input voltage requirement of the inverter of 30V (several solar panels connected in series). Inverter specifications: Nominal battery voltage: 24V Continuous power output: 3000W/3000VA (220-240V AC) Surge power: 6000VA Output frequency: 50Hz - 60Hz Output waveform: Pure sine wave Maximum solar input power: 1500W Maximum open circuit solar input voltage: 145V (open circuit) MPPT operating solar voltage: 30 - 115 V Maximum solar charging current: 60A Maximum mains AC charging current: 60A Maximum combined charging current: 120A Peak efficiency: 93% Solar / AC charger max efficiency: 98% Operating temperature: 0°C to 55°C Supplied with USB drive, PC connection cable and PC software CD Size: 52.5 x 30.3 x 14 cm Weight: 13 kg

...Read more View Product

£599.00

Victron Energy MultiPlus Compact 24/1600/40-16 230V – PMP242160000

The new style Victron Energy MultiPlus 24/1600 Inverter Charger is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Features of the MultiPlus 24/1600 Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backupgenerator and more…” Parallel Operation and Three Phase CapabilityUp to six Multis can operate in parallel to achieve higher power output.In addition to parallel connection, three units can be configured for three-phase output PowerAssist – Boosting the Capacity of Shore or Generator PowerThis feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Want to have perfect control over your system from wherever you are whilst using your MultiPlus 24/1600, why not have a look at the Cerbo GX Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.

...Read more View Product

£3,298.99

15kW 48V TBB Power TYRANN Inverter charger

The TBB Tyrann is a robust, transformer-based inverter charger designed for backup, off-grid, and energy storage applications. This model features a programmable smart port, allowing it to function as either a generator input or secondary AC output to enhance load flexibility. This inverter is ideal for stationary and mobile setups, such as off-grid homes, cabins, or remote properties. The Tyrann supports peak shaving, time-of-use optimization, and grid feed-in for utility credits. With an ultra-fast 0ms transfer to battery power, it ensures seamless operation during outages, making it perfect for installations requiring energy independence and reliability. Key Features: 1. Ultra-fast 0ms transfer to battery power: The Tyrann’s instant transfer speed guarantees uninterrupted power, seamlessly switching to battery power in zero milliseconds to keep connected devices running smoothly without any delay. 2. High-surge pure sine wave inverter: Delivers stable 230V AC output with high surge capacity, providing the pure sine wave quality required for sensitive electronics and high-demand appliances. 3. Enhanced flexibility: The Tyrann can be configured in parallel with up to 3 units in singles phase applications, or up to 9 units in three-phase applications, achieving a maximum output of 135kVA. This inverter features dual AC inputs and outputs, this allows for maximum flexibility for both on-grid and off-grid applications. 4. ESS and grid-tie capabilities: The Tyrann inverter seamlessly integrates with the E4 LCD Monitor and IC-METER, unlocking advanced Energy Storage System (ESS) and grid-tie functionalities. This allows for real-time monitoring, efficient energy management, and smooth interaction with the grid, ensuring a versatile and future-ready power solution. 5. 100A transfer switch: The AC transfer switch inside the Tyrann is rated up to 100A, allowing for up to 23.0kW of power to be passed through to the loads from the AC input when the inverter is in bypass. Additional Intelligent Features: Customizable settings: Easily adjust parameters such as battery type, AC input range, charging current, high/low voltage disconnect, charging stages, auto-restart, and power-saving modes through an intuitive interface. LCD monitoring screen: The optional E4 LCD Monitor displays real-time data including voltage, frequency, battery levels, and load percentages, making it simple to monitor performance and adjust settings. Integrated load management system: Manages power distribution across connected devices, optimizing energy use and preventing overloads for reliable, balanced performance. Advanced Communication and monitoring: Users can easily monitor performance through the Nova Web and mobile app via the TBB-KIN2 Kinergy-II Wi-Fi module, this allows for control and adjustments from anywhere. Advanced battery management: Compatible with various lithium and lead-acid (GEL/AGM) batteries, featuring overcharge protection, AGS (Automatic Generator Start), power assist and control, providing seamless power support across different applications. Intelligent cooling design: Predictive fan control adjusts speed based on load and temperature, ensuring optimal performance while extending component lifespan. Compatibility: The Tyrann inverter is compatible with external 600V MPPT solar charge controllers (not included), allowing users to integrate solar energy into their power system. For users prioritizing reliability and ultra-fast power transfer, the Tyrann inverter offers a rugged, adaptable power solution for critical applications and off-grid energy systems. Inverter specifications: Nominal battery voltage: 48V Continuous power output: 15000VA (220-240V AC) Maximum output power: 15000W Peak power: 45000W AC Output frequency: 50/60Hz Output waveform: Pure sine wave Maximum AC charging current: 200A AC transfer current: 100A Auxiliary AC output current: 50A Peak efficiency: 96% Zero load power: 60W Transfer time: 0ms Protection index: IP21 Operating temperature: -40°C to 65°C Humidity: 95% without condensation Altitude: <3500m Size: 672 x 498 x 290 mm Weight: 80 kg This product is covered by a 5 year manufacturer warranty.

...Read more View Product

£2,598.99

10kW 48V TBB Power TYRANN Inverter charger

The TBB Tyrann is a robust, transformer-based inverter charger designed for backup, off-grid, and energy storage applications. This model features a programmable smart port, allowing it to function as either a generator input or secondary AC output to enhance load flexibility. This inverter is ideal for stationary and mobile setups, such as off-grid homes, cabins, or remote properties. The Tyrann supports peak shaving, time-of-use optimization, and grid feed-in for utility credits. With an ultra-fast 0ms transfer to battery power, it ensures seamless operation during outages, making it perfect for installations requiring energy independence and reliability. Key Features: 1. Ultra-fast 0ms transfer to battery power: The Tyrann’s instant transfer speed guarantees uninterrupted power, seamlessly switching to battery power in zero milliseconds to keep connected devices running smoothly without any delay. 2. High-surge pure sine wave inverter: Delivers stable 230V AC output with high surge capacity, providing the pure sine wave quality required for sensitive electronics and high-demand appliances. 3. Enhanced flexibility: The Tyrann can be configured in parallel with up to 3 units in singles phase applications, or up to 9 units in three-phase applications, achieving a maximum output of 90kVA. This inverter features dual AC inputs and outputs, this allows for maximum flexibility for both on-grid and off-grid applications. 4. ESS and grid-tie capabilities: The Tyrann inverter seamlessly integrates with the E4 LCD Monitor and IC-METER, unlocking advanced Energy Storage System (ESS) and grid-tie functionalities. This allows for real-time monitoring, efficient energy management, and smooth interaction with the grid, ensuring a versatile and future-ready power solution. 5. 100A transfer switch: The AC transfer switch inside the Tyrann is rated up to 100A, allowing for up to 23.0kW of power to be passed through to the loads from the AC input when the inverter is in bypass. Additional Intelligent Features: Customizable settings: Easily adjust parameters such as battery type, AC input range, charging current, high/low voltage disconnect, charging stages, auto-restart, and power-saving modes through an intuitive interface. LCD monitoring screen: The optional E4 LCD Monitor displays real-time data including voltage, frequency, battery levels, and load percentages, making it simple to monitor performance and adjust settings. Integrated load management system: Manages power distribution across connected devices, optimizing energy use and preventing overloads for reliable, balanced performance. Advanced Communication and monitoring: Users can easily monitor performance through the Nova Web and mobile app via the TBB-KIN2 Kinergy-II Wi-Fi module, this allows for control and adjustments from anywhere. Advanced battery management: Compatible with various lithium and lead-acid (GEL/AGM) batteries, featuring overcharge protection, AGS (Automatic Generator Start), power assist and control, providing seamless power support across different applications. Intelligent cooling design: Predictive fan control adjusts speed based on load and temperature, ensuring optimal performance while extending component lifespan. Compatibility: The Tyrann inverter is compatible with external 600V MPPT solar charge controllers (not included), allowing users to integrate solar energy into their power system. For users prioritizing reliability and ultra-fast power transfer, the Tyrann inverter offers a rugged, adaptable power solution for critical applications and off-grid energy systems. Inverter specifications: Nominal battery voltage: 48V Continuous power output: 10000VA (220-240V AC) Maximum output power: 10000W Peak power: 30000W AC Output frequency: 50/60Hz Output waveform: Pure sine wave Maximum AC charging current: 140A AC transfer current: 100A Auxiliary AC output current: 50A Peak efficiency: 96% Zero load power: 40W Transfer time: 0ms Protection index: IP21 Operating temperature: -40°C to 65°C Humidity: 95% without condensation Altitude: <3500m Size: 672 x 498 x 290 mm Weight: 74 kg This product is covered by a 5 year manufacturer warranty.

...Read more View Product

£2,198.99

8kW 48V TBB Power TYRANN transformer-based Inverter charger

The TBB Tyrann is a robust, transformer-based inverter charger designed for backup, off-grid, and energy storage applications. This model features a programmable smart port, allowing it to function as either a generator input or secondary AC output to enhance load flexibility. This inverter is ideal for stationary and mobile setups, such as off-grid homes, cabins, or remote properties. The Tyrann supports peak shaving, time-of-use optimization, and grid feed-in for utility credits. With an ultra-fast 0ms transfer to battery power, it ensures seamless operation during outages, making it perfect for installations requiring energy independence and reliability. Key Features: 1. Ultra-fast 0ms transfer to battery power: The Tyrann’s instant transfer speed guarantees uninterrupted power, seamlessly switching to battery power in zero milliseconds to keep connected devices running smoothly without any delay. 2. High-surge pure sine wave inverter: Delivers stable 230V AC output with high surge capacity, providing the pure sine wave quality required for sensitive electronics and high-demand appliances. 3. Enhanced flexibility: The Tyrann can be configured in parallel with up to 3 units in singles phase applications, or up to 9 units in three-phase applications, achieving a maximum output of 72kVA. It features a built-in smart port for generator input or a second AC output, which enhances system versatility. 4. ESS and grid-tie capabilities: The Tyrann inverter seamlessly integrates with the E4 LCD Monitor and IC-METER, unlocking advanced Energy Storage System (ESS) and grid-tie functionalities. This allows for real-time monitoring, efficient energy management, and smooth interaction with the grid, ensuring a versatile and future-ready power solution. 5. 50A transfer switch: The AC transfer switch inside the Tyrann is rated up to 50A, allowing for up to 11.5kW of power to be passed through to the loads from the AC input when the inverter is in bypass. Additional Intelligent Features: Customizable settings: Easily adjust parameters such as battery type, AC input range, charging current, high/low voltage disconnect, charging stages, auto-restart, and power-saving modes through an intuitive interface. LCD monitoring screen: The optional E4 LCD Monitor displays real-time data including voltage, frequency, battery levels, and load percentages, making it simple to monitor performance and adjust settings. Integrated load management system: Manages power distribution across connected devices, optimizing energy use and preventing overloads for reliable, balanced performance. Advanced Communication and monitoring: Users can easily monitor performance through the Nova Web and mobile app via the TBB-KIN2 Kinergy-II Wi-Fi module, this allows for control and adjustments from anywhere. Advanced battery management: Compatible with various lithium and lead-acid (GEL/AGM) batteries, featuring overcharge protection, AGS (Automatic Generator Start), power assist and control, providing seamless power support across different applications. Intelligent cooling design: Predictive fan control adjusts speed based on load and temperature, ensuring optimal performance while extending component lifespan. Compatibility: The Tyrann inverter is compatible with external 600V MPPT solar charge controllers (not included), allowing users to integrate solar energy into their power system. For users prioritizing reliability and ultra-fast power transfer, the Tyrann inverter offers a rugged, adaptable power solution for critical applications and off-grid energy systems. Inverter specifications: Nominal battery voltage: 48V Continuous power output: 8000VA (220-240V AC) Maximum output power: 8000W Peak power: 24000W AC Output frequency: 50/60Hz Output waveform: Pure sine wave Maximum AC charging current: 110A AC transfer current: 50A Peak efficiency: 96% Zero load power: 26W Transfer time: 0ms Protection index: IP21 Operating temperature: -40°C to 65°C Humidity: 95% without condensation Altitude: <2000m Size: 620 x 320 x 164 mm Weight: 36 kg This product is covered by a 5 year manufacturer warranty.

...Read more View Product

£998.99

5kW 48V TBB Power RIIO-II Off-Grid ESS Inverter charger

The RiiO II inverter charger is a versatile transformer-based inverter charger that seamlessly combines backup power, off-grid functionality, and energy storage system (ESS) capabilities. Designed to support high surge loads, it features an ultra-fast 4ms transfer time to ensure uninterrupted power during outages. This innovative inverter charger supports up to nine parallel units (three per phase) for expanded power capacity, making it an excellent choice for a wide range of applications. Key Functions: 1. High surge power handling: The RiiO II can efficiently manage heavy loads, with the capacity to deliver exceptional surge power when needed. With a swift 4ms transfer time, it quickly switches to battery power during outages, ensuring your critical appliances remain operational. 2. Parallel and three-phase capability: The RiiO II can be configured in parallel with up to 3 units in singles phase applications, or up to 9 units in three-phase applications, achieving a maximum output of 45KVA. This feature is ideal for larger installations where higher power demands are necessary. 3. ESS and grid-tie capabilities: The RiiO II inverter seamlessly integrates with the E4 LCD Monitor and IC-METER, unlocking advanced Energy Storage System (ESS) and grid-tie functionalities. This allows for maximising self-consumption which helps lower electricity bills through advanced peak shaving and time-of-use management. Additionally, it enables grid feed-in for utility credits, providing economic advantages for users. 4. 50A transfer switch: The AC transfer switch inside the RiiO-II is rated up to 50A, allowing for up to 11.5kW of power to be passed through to the loads from the AC input when the inverter is in bypass. Additional Intelligent Features: AGS functionality: The Automatic Generator Start (AGS) function ensures that your generator operates only when necessary, offering convenience and efficiency. Power assist and control for generators: Power assist enables a small generator to handle heavy loads by supplementing its capacity when needed. Power control ensures the generator operates at its optimal consumption level, maintaining a consistent output to significantly reduce fuel consumption. ECO mode: Designed to prolong backup time, this mode reduces self-consumption, maximizing the inverter’s efficiency. Remote monitoring: Users can easily monitor performance through the Nova Web and mobile app via the TBB-KIN2 Kinergy-II Wi-Fi module, this allows for control and adjustments from anywhere. Easy operation and maintenance: The RiiO II automatically restarts when AC power is restored, and features a user-friendly interface for easy operation. Enhanced reliability: With a maximum inverter efficiency of 94%, the RiiO II delivers reliable performance while ensuring minimal energy loss during operation. Compatibility: This inverter charger is compatible with mainstream lithium battery brands and generators, making it a versatile addition to your power system. It is suitable for both stationary and mobile applications, providing reliable power for remote properties, holiday homes, and backup systems in areas with frequent power interruptions. Inverter specifications: Nominal battery voltage: 48V Continuous power output: 5000W/5000VA (220-240V AC) Peak power: 10000W Output waveform: Pure sine wave Maximum mains AC charging current: 60A AC transfer current: 50A Peak efficiency: 94% Protection index: IP21 Operating temperature: -20°C to 65°C Humidity: 95% without condensation Altitude: <2000m Size: 570 x 310 x 154 mm Weight: 27 kg

...Read more View Product

£678.99

3kW 48V TBB Power RIIO-II Off-Grid ESS Inverter charger

The RiiO II inverter charger is a versatile transformer-based inverter charger that seamlessly combines backup power, off-grid functionality, and energy storage system (ESS) capabilities. Designed to support high surge loads, it features an ultra-fast 4ms transfer time to ensure uninterrupted power during outages. This innovative inverter charger supports up to nine parallel units (three per phase) for expanded power capacity, making it an excellent choice for a wide range of applications. Key Functions: 1. High surge power handling: The RiiO II can efficiently manage heavy loads, with the capacity to deliver exceptional surge power when needed. With a swift 4ms transfer time, it quickly switches to battery power during outages, ensuring your critical appliances remain operational. 2. Parallel and three-phase capability: The RiiO II can be configured in parallel with up to 3 units in singles phase applications, or up to 9 units in three-phase applications, achieving a maximum output of 27KVA. This feature is ideal for larger installations where higher power demands are necessary. 3. ESS and grid-tie capabilities: The RiiO II inverter seamlessly integrates with the E4 LCD Monitor and IC-METER, unlocking advanced Energy Storage System (ESS) and grid-tie functionalities. This allows for maximising self-consumption which helps lower electricity bills through advanced peak shaving and time-of-use management. Additionally, it enables grid feed-in for utility credits, providing economic advantages for users. 4. 32A transfer switch: The AC transfer switch inside the RiiO-II is rated up to 32A, allowing for up to 7.36kW of power to be passed through to the loads from the AC input when the inverter is in bypass. Additional Intelligent Features: AGS functionality: The Automatic Generator Start (AGS) function ensures that your generator operates only when necessary, offering convenience and efficiency. Power assist and control for generators: Power assist enables a small generator to handle heavy loads by supplementing its capacity when needed. Power control ensures the generator operates at its optimal consumption level, maintaining a consistent output to significantly reduce fuel consumption. ECO mode: Designed to prolong backup time, this mode reduces self-consumption, maximizing the inverter’s efficiency. Remote monitoring: Users can easily monitor performance through the Nova Web and mobile app via the TBB-KIN2 Kinergy-II Wi-Fi module, this allows for control and adjustments from anywhere. Easy operation and maintenance: The RiiO II automatically restarts when AC power is restored, and features a user-friendly interface for easy operation. Enhanced reliability: With a maximum inverter efficiency of 94%, the RiiO II delivers reliable performance while ensuring minimal energy loss during operation. Compatibility: This inverter charger is compatible with mainstream lithium battery brands and generators, making it a versatile addition to your power system. It is suitable for both stationary and mobile applications, providing reliable power for remote properties, holiday homes, and backup systems in areas with frequent power interruptions. Inverter specifications: Nominal battery voltage: 48V Continuous power output: 3000W/3000VA (220-240V AC) Peak power: 6000W Output waveform: Pure sine wave Maximum mains AC charging current: 35A AC transfer current: 32A Peak efficiency: 93% Protection index: IP21 Operating temperature: -20°C to 65°C Humity: 95% without condensation Altitude: <2000m Size: 499 x 272 x 144 mm Weight: 17 kg This product is covered by a 5 year manufacturer warranty.

...Read more View Product

£648.99

3kW 24V TBB Power RIIO-II Off-Grid ESS Inverter charger

The RiiO II inverter charger is a versatile transformer-based inverter charger that seamlessly combines backup power, off-grid functionality, and energy storage system (ESS) capabilities. Designed to support high surge loads, it features an ultra-fast 4ms transfer time to ensure uninterrupted power during outages. This innovative inverter charger supports up to nine parallel units (three per phase) for expanded power capacity, making it an excellent choice for a wide range of applications. Key Functions: 1. High surge power handling: The RiiO II can efficiently manage heavy loads, with the capacity to deliver exceptional surge power when needed. With a swift 4ms transfer time, it quickly switches to battery power during outages, ensuring your critical appliances remain operational. 2. Parallel and three-phase capability: The RiiO II can be configured in parallel with up to 3 units in singles phase applications, or up to 9 units in three-phase applications, achieving a maximum output of 27KVA. This feature is ideal for larger installations where higher power demands are necessary. 3. ESS and grid-tie capabilities: The RiiO II inverter seamlessly integrates with the E4 LCD Monitor and IC-METER, unlocking advanced Energy Storage System (ESS) and grid-tie functionalities. This allows for maximising self-consumption which helps lower electricity bills through advanced peak shaving and time-of-use management. Additionally, it enables grid feed-in for utility credits, providing economic advantages for users. 4. 32A transfer switch: The AC transfer switch inside the RiiO-II is rated up to 32A, allowing for up to 7.36kW of power to be passed through to the loads from the AC input when the inverter is in bypass. Additional Intelligent Features: AGS functionality: The Automatic Generator Start (AGS) function ensures that your generator operates only when necessary, offering convenience and efficiency. Power assist and control for generators: Power assist enables a small generator to handle heavy loads by supplementing its capacity when needed. Power control ensures the generator operates at its optimal consumption level, maintaining a consistent output to significantly reduce fuel consumption. ECO mode: Designed to prolong backup time, this mode reduces self-consumption, maximizing the inverter’s efficiency. Remote monitoring: Users can easily monitor performance through the Nova Web and mobile app via the TBB-KIN2 Kinergy-II Wi-Fi module, this allows for control and adjustments from anywhere. Easy operation and maintenance: The RiiO II automatically restarts when AC power is restored, and features a user-friendly interface for easy operation. Enhanced reliability: With a maximum inverter efficiency of 94%, the RiiO II delivers reliable performance while ensuring minimal energy loss during operation. Compatibility: This inverter charger is compatible with mainstream lithium battery brands and generators, making it a versatile addition to your power system. It is suitable for both stationary and mobile applications, providing reliable power for remote properties, holiday homes, and backup systems in areas with frequent power interruptions. Inverter specifications: Nominal battery voltage: 24V Continuous power output: 3000W/3000VA (220-240V AC) Peak power: 6000W Output waveform: Pure sine wave Maximum mains AC charging current: 70A AC transfer current: 32A Peak efficiency: 91% Protection index: IP21 Operating temperature: -20°C to 65°C Humidity: 95% without condensation Altitude: <2000m Size: 499 x 272 x 144 mm Weight: 17 kg This product is covered by a 5 year manufacturer warranty.

...Read more View Product

Out of Stock

£199.99

2000W 12V pure sine wave power inverter 230V AC output (UK sockets)

power inverter is a device which converts battery output (DC, or direct current) into 230V AC mains electricity (alternating current). 230V AC is the type of electricity supplied by utility companies to run standard domestic appliances such as a TV, fridge, radio, lights or to charge a laptop / mobile phone etc. If you have a battery, connecting a power inverter will enable you to power household appliances in areas with no access to mains electricity; such as in a motorhome, caravan, boat, farm or any other remote location. Inverters are also perfect for off-grid and back up systems for accidental power cuts. This is a 2000W 12V pure sine wave power inverter which can generate 2000W of continuous power and up to 4000W of power at peak times (peak time reserve capacity is useful if more energy is required to start an appliance than for its continuous running). This is a pure sine wave type of inverter, which means that the 230V AC output harmonically follows a smooth sine wave and is almost identical to normal mains electricity. Pure sine wave output is far superior than square sine wave or modified sine wave output for running appliances. This is because: It is suitable for a broader range of appliances (for example, appliances with electric motors can not be powered by modified sine wave inverters) It is more efficient compared to modified sine wave inverters. This product comes with important protection and safety features, such as over-discharge, overload, overheating and short-circuit automatic shutdown. The inverter also features a powerful USB port for faster charging of mobile phones, MP3 players and other USB-compatible devices (2.1A). Specifications: Continuous power: 2000W Surge power: 4000W Input: 12V (10-15.5V) DC Output: 220-240V AC Output frequency: 50-60 Hz Output waveform: pure sine wave THD: less than 3% Peak efficiency: 87% USB output: 2.1A Low battery alarm: 11.5V +/- 0.5V DC Low battery shut down: 10.5V +/- 0.5V DC High voltage shut down: 15.5V +/- 0.5V DC Size: 37 x 23 x 11 cm Weight: 4.9 kg

£129.99

Victron Energy Phoenix Inverter 24/500 230V VE.Direct UK – PIN241501400

The Phoenix 24/500 VE.Direct inverter allows you to power domestic equipment – requiring 230V – using ‘leisure’ or ‘automotive’ batteries rated at 12V, 24V or 48V DC. This unit has the UK plug. Features of the Phoenix Inverter 24/500 VE.Direct VE.Direct communication port Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut-off and restart levels Dynamic cut-off: load dependent cut-off level Output voltage 210 – 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring: In- and output voltage, % load and alarms Proven reliability The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Inverter 24/500 VE.Direct are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the Phoenix Inverter 24/500 VE.Direct will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. DC connection with screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number PIN241501400 gtin 8719076056034 Voltage 24V Cont. Output Power at 25ºC 500VA Peak Power 900W Output AC Voltage 230V Efficiency 90% Protection Category IP21 Dimensions H86 x W172 x D275mm Weight 3.9Kg Warranty 5 Years Bluetooth Enabled No Plug Type UK

...Read more View Product

£455.00

Sterling Power Pure Sine Wave Inverter 12V 1600W RCD – SIBR121600

Sterling Power Pro Power SB Pure Sine Wave Inverter With RCD & AC Cable 12V 1600W – SIBR121600 Pre- Fitted and Wired RCD option with 1m AC cable, Centre tapped earth and Neutral earth bonded with USB charger and optional remote control. Features Replicates true shore power, suitable for all appliances. With Twin Socket or built in RCD. Adjustable between Neutral Earth Bonding and Centre Tapping. No DC cables supplied.

...Read more View Product

£275.00

Victron Energy MultiPlus 24/500/10-16 230V – PMP241500000

The new style Victron Energy MultiPlus 24/500 Inverter Charger is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. Features of the MultiPlus 24/500 Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backupgenerator and more…” Parallel Operation and Three Phase CapabilityUp to six Multis can operate in parallel to achieve higher power output.In addition to parallel connection, three units can be configured for three-phase output PowerAssist – Boosting the Capacity of Shore or Generator PowerThis feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Want to have perfect control over your system from wherever you are whilst using your MultiPlus 24/500, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Brand Victron Energy Manufacturer Part Number PMP241500000 gtin 8719076046370 Voltage 24V Cont. Output Power at 25°C 500VA Peak Power 900W Output AC Voltage 230V Transfer Switch 16A Charge Current House Battery 10A Charge Current Starter Battery 1A Protection Category IP21 Efficiency 91% Bluetooth Compatible No Dimensions H311 x W182 x D100mm Weight 4.4Kg Warranty 5 Years

...Read more View Product

£886.00

Victron Energy MultiPlus Compact 24/2000/50-30 230V – CMP242200000

The MultiPlus Compact 24/2000/50-30, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features of the MultiPlus Compact 24/2000/50-30 Unique PowerAssist feature The MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities. Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backupgenerator and more… Want to have perfect control over your system from wherever you are whilst using your MultiPlus Compact 24/2000, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Brand Victron Energy Manufacturer Part Number CMP242200000 gtin 8719076037552 Voltage 24V Cont. Output Power at 25°C 2000VA Peak Power 4000W Output AC Voltage 230V Transfer Switch 30A Charge Current House Battery 50A Charge Current Starter Battery 4A Protection Category IP21 Efficiency 94% Bluetooth Compatible No Dimensions H520 x W255 x D125mm Weight 12Kg Warranty 5 Years

...Read more View Product

£666.00

Victron Energy MultiPlus Compact 24/1600 24V 1600VA - CMP241620000

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.FeaturesTwo AC OutputsThe main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).Virtually unlimited power thanks to parallel operationUp to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.Three phase capabilityIn addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.PowerControl - Dealing with limited generator, shore side or grid powerThe MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.PowerAssist - Boosting the capacity of shore or generator powerThis feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.Solar energy: AC power available even during a grid failureThe MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.System configuringIn case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).On-site Monitoring and controlSeveral options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).Remote Monitoring and controlColor Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.Remote configuringWhen connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely. GTIN 8719076022039 Voltage 24V Cont. output power at 25°C 1600VA Peak Power 3000W Output AC Voltage 230V Transfer Switch 16A Charge Current House Battery 40A Charge Current Starter Battery 4A Efficiency 94% Bluetooth Compatible No Protection Category IP21 Dimensions H375 x W214 x D110mm Weight 10Kg Warranty 5 Years

...Read more View Product

£475.00

Victron Energy MultiPlus Compact 12/800 12V 800VA - CMP128010000

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.FeaturesTwo AC OutputsThe main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).Virtually unlimited power thanks to parallel operationUp to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.Three phase capabilityIn addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.PowerControl - Dealing with limited generator, shore side or grid powerThe MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.PowerAssist - Boosting the capacity of shore or generator powerThis feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.Solar energy: AC power available even during a grid failureThe MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.System configuringIn case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).On-site Monitoring and controlSeveral options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).Remote Monitoring and controlColor Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.Remote configuringWhen connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely. GTIN 8719076022015 Voltage 12V Cont. output power at 25°C 800VA Peak Power 1600W Output AC Voltage 230V Transfer Switch 16A Charge Current House Battery 35A Charge Current Starter Battery 4A Efficiency 92% Bluetooth Compatible No Protection Category IP21 Dimensions H375 x W214 x D110mm Weight 10Kg Warranty 5 Years

...Read more View Product

£890.00

Victron MultiPlus Compact 12/2000/80-50 120V VE.Bus CMP122200100

Victron MultiPlus Compact 12/2000/80-50 120V VE.Bus (CMP122200100) Victron Multiplus Compact 12/2000/80-50 120V VE.Bus as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Models: 800VA, 1200VA, 1600VA, 2000VA, 3000VA, 5000VA Unique PowerAssist feature The MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check the datasheets to see which models have paralleling, three phase and split phase capabilities. Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backupgenerator and more… Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).Virtually unlimited power thanks to parallel operationUp to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But thats not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl Dealing with limited generator, shore side or grid powerThe MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist Boosting the capacity of shore or generator powerThis feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.Solar energy: AC power available even during a grid failureThe MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuringIn case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications). On-site Monitoring and controlSeveral options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232). Remote Monitoring and controlColor Control GX or other GX devices.Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. Remote configuringWhen connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely.

...Read more View Product

Out of Stock

£0.00

Victron MultiPlus 12/2000/80-50 120V VE.Bus PMP122200102

Victron MultiPlus 12/2000/80-50 120V VE.Bus (UL) (PMP122200102) Victron Multiplus Compact 12/2000/80-50 120V VE.Bus as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Unique PowerAssist feature The MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shoreside supply with power taken from the battery. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Three-phase or split-phase operation is also possible. Please check the datasheets to see which models have paralleling, three phase and split-phase capabilities. Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto-starting a backup generator Weight 15 kg Dimensions 62 × 33 × 22 cm Voltage 12V Inverter Rating 2000VA

£563.00

Victron Energy MultiPlus Compact 12/1200/50-16 230V – CMP121220000

The MultiPlus Compact 12/1200/50-16, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features of the MultiPlus Compact 12/1200/50-16 Unique PowerAssist feature The MultiPlus will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities. Remote Monitoring and Control When coupled with a GX device you can monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backupgenerator and more… Want to have perfect control over your system from wherever you are whilst using your MultiPlus Compact 12/1200, why not have a look at the Cerbo GXSimply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Brand Victron Energy Manufacturer Part Number CMP121220000 gtin 8719076021957 Voltage 12V Cont. Output Power at 25°C 1200VA Peak Power 2400W Output AC Voltage 230V Transfer Switch 16A Charge Current House Battery 50A Charge Current Starter Battery 4A Protection Category IP21 Efficiency 93% Bluetooth Compatible No Dimensions H375 x W214 x D110mm Weight 10Kg Warranty 5 Years

...Read more View Product

£1,690.00

Victron Energy Quattro 12/3000/120-50/50 230V – QUA123020010

Similar to the MultiPlus, the Quattro 12/3000/120-50 is also a combined inverter and charger. Additionally it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation.Features of the Quattro 12/3000-120-50Two AC Inputs & two AC OutputsThe Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.Unique PowerAssist featureThe Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.Virtually unlimited power thanks to parallel operationUp to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.Remote Monitoring and ControlWhen coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Quattro and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Quattro to auto starting a backupgenerator and more…Want to have perfect control over your system from wherever you are whilst using your Quattro 12/3000, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50.The MK3-USB allows the Quattro to connect to a computer for configuration and firmware updates. Brand Victron Energy Manufacturer Part Number QUA123020010 gtin 8719076024101 Voltage 12V Cont. Output Power at 25°C 3000VA Peak Power 6000W Output AC Voltage 230V Transfer Switch Yes Charge Current House Battery 120A Charge Current Starter Battery 4A Protection Category IP21 Efficiency 93% Bluetooth Compatible No Dimensions H362 x W258 x D218mm Weight 19Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£2,299.00

Victron Energy Multi RS Solar 48/6000/100-450/100 – PMR482602020

The Multi RS Solar 48/6000 is a 48V 6kVA Inverter/Charger with 450VDC 4kWp PV input. Thanks to high frequency technology and a new design this powerful inverter weighs only 11kg. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation. The display reads battery, inverter and solar parameters. The same parameters can be accessed with a smartphone or other Bluetooth enabled device, using the VictronConnect app. Features of the Multi RS Solar 48/6000 Combination of an inverter, AC charger, and Solar MPPT The inverter produces a perfect sine wave, and able to supply high powered appliances. It is also bi-directional, charging the battery when excess solar power or AC supply is available, or converting from the battery when it is needed. Light weight, efficient and quiet Thanks to high frequency technology and a new design this powerful inverter weighs only 11 kg. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation. Communication ports VE.Can connection to a GX device for system monitoring, data logging, and remote firmware updates. VE.Direct connection to a GlobalLink 520 for remote data monitoring. I/O Connections Programmable Relay, temperature sensor and voltage sensor connections. The remote input can also be configured to accept the Victron smallBMS. VRM Portal When the Multi RS is connected to a GX device with internet connection, you can access the free remote monitoring website (VRM). This will display all your system data in a comprehensive graphical format. System settings can be changed remotely via the portal. Alarms can be received by e-mail. Control over your system Want to have perfect control over your system from wherever you are whilst using your Quattro-II 24/5000, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Brand Victron Energy Manufacturer Part Number PMR482602020 gtin 8719076056690 Voltage 48V Cont. Output Power at 25ºC 6000VA Peak Power 9 kW for 3 seconds Output AC Voltage 230V Protection Category IP21 Bluetooth Compatible Yes Dimensions H425 x W440 x D125mm Weight 11Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£1,799.00

Dometic 12V 3000W Pure Sine Wave Inverter - DSP3512TUK

Designed to turn 12 V battery power into pure 230 V AC, this compact sine wave inverter ensures reliable operation of electric devices up to 3000 W from the vehicle battery. Integrated protection circuits prevent damage by overload, overheat, over- and under-voltage. The automatic standby mode saves energy. Value for Money Sensitive household devices like electric toothbrushes, laptops, TVs or DVD players require a pure 230 V AC voltage, like that from your power socket at home. This is exactly what our SinePower DSP sine wave inverters provide. The compact devices give you incredible value for money: energy-saving standby mode, smart protection circuits to prevent damage in case of an overload, and a superbly quiet fan. Features Pure sine wave 230 V AC output voltage is suitable for sensitive electronic devices Automatic restart after overload, over- or under-voltage Wide DC input voltage range – ideal for vehicles with EURO 6 emission standard Quiet fan is load and temperature-controlled Energy-saving standby mode with automatic wake-up function Remote control panel included as standard Easy installation in horizontal or vertical position Voltage 12V Continuous Power 3000W Output Voltage 230V Efficiency >90 % Dimensions H122 x W490 x D122mm Weight 10.9Kg Warranty 2 Years

...Read more View Product

£999.00

Dometic 12V 1800W Pure Sine Wave Inverter - DSP1812TUK

Designed to turn 12 V battery power into pure 230 V AC, this compact sine wave inverter ensures reliable operation of electric devices up to 1800 W from the vehicle battery. Integrated protection circuits prevent damage by overload, overheat, over- and under-voltage. The automatic standby mode saves energy. Value for Money Sensitive household devices like electric toothbrushes, laptops, TVs or DVD players require a pure 230 V AC voltage, like that from your power socket at home. This is exactly what our SinePower DSP sine wave inverters provide. The compact devices give you incredible value for money: energy-saving standby mode, smart protection circuits to prevent damage in case of an overload, and a superbly quiet fan. Features Pure sine wave 230 V AC output voltage is suitable for sensitive electronic devices Automatic restart after overload, over- or under-voltage Wide DC input voltage range – ideal for vehicles with EURO 6 emission standard Quiet fan is load and temperature-controlled Energy-saving standby mode with automatic wake-up function Remote control panel included as standard Easy installation in horizontal or vertical position Voltage 12V Continuous Power 1800W Output Voltage 230V Efficiency >89 % Dimensions H118 x W405 x 118mm Weight 6.1Kg Warranty 2 Years

...Read more View Product

£599.99

Dometic 12V 1200W Pure Sine Wave Inverter - DSP1312TUK

Designed to turn 12 V battery power into pure 230 V AC, this compact sine wave inverter ensures reliable operation of electric devices up to 1200 W from the vehicle battery. Integrated protection circuits prevent damage by overload, overheat, over- and under-voltage. The automatic standby mode saves energy. Value for Money Sensitive household devices like electric toothbrushes, laptops, TVs or DVD players require a pure 230 V AC voltage, like that from your power socket at home. This is exactly what our SinePower DSP sine wave inverters provide. The compact devices give you incredible value for money: energy-saving standby mode, smart protection circuits to prevent damage in case of an overload, and a superbly quiet fan. Features Pure sine wave 230 V AC output voltage is suitable for sensitive electronic devices Automatic restart after overload, over- or under-voltage Wide DC input voltage range – ideal for vehicles with EURO 6 emission standard Quiet fan is load and temperature-controlled Energy-saving standby mode with automatic wake-up function Remote control panel included as standard Easy installation in horizontal or vertical position Voltage 12V Continuous Power 1200W Output Voltage 230V Efficiency >89 % Dimensions H118 x W405 x D284mm Weight 4.8Kg Warranty 2 Years

...Read more View Product

£366.99

Dometic 12V 600W Pure Sine Wave Inverter - DSP612UK

Designed to turn 12 V battery power into pure 230 V AC, this compact sine wave inverter ensures reliable operation of electric devices up to 600 W from the vehicle battery. Integrated protection circuits prevent damage by overload, overheat, over- and under-voltage. The automatic standby mode saves energy. Value for Money Sensitive household devices like electric toothbrushes, laptops, TVs or DVD players require a pure 230 V AC voltage, like that from your power socket at home. This is exactly what our SinePower DSP sine wave inverters provide. The compact devices give you incredible value for money: energy-saving standby mode, smart protection circuits to prevent damage in case of an overload, and a superbly quiet fan. Features Pure sine wave 230 V AC output voltage is suitable for sensitive electronic devices Automatic restart after overload, over- or under-voltage Wide DC input voltage range – ideal for vehicles with EURO 6 emission standard Quiet fan is load and temperature-controlled Energy-saving standby mode with automatic wake-up function Remote control panel included as standard Easy installation in horizontal or vertical position Voltage 12V Continuous Power 600W Output Voltage 230V Efficiency >90% Dimensions H80 x W230 x D220mm Weight 2.8Kg Warranty 2 Years

...Read more View Product

£814.99

Dometic 12V 2000W Pure Sine Wave Inverter - DSP2012UK

Designed to turn 12 V battery power into pure 230 V AC, this compact sine wave inverter ensures reliable operation of electric devices up to 2000 W from the vehicle battery. Integrated protection circuits prevent damage by overload, overheat, over- and under-voltage. The automatic standby mode saves energy. Value for Money Sensitive household devices like electric toothbrushes, laptops, TVs or DVD players require a pure 230 V AC voltage, like that from your power socket at home. This is exactly what our SinePower DSP sine wave inverters provide. The compact devices give you incredible value for money: energy-saving standby mode, smart protection circuits to prevent damage in case of an overload, and a superbly quiet fan. Features Pure sine wave 230 V AC output voltage is suitable for sensitive electronic devices Automatic restart after overload, over- or under-voltage Wide DC input voltage range – ideal for vehicles with EURO 6 emission standard Quiet fan is load and temperature-controlled Energy-saving standby mode with automatic wake-up function Remote control panel included as standard Easy installation in horizontal or vertical position Voltage 12V Continuous Power 2000W Output Voltage 230V Efficiency >90 % Dimensions H360 x W272 x D97mm Weight 5.2Kg Warranty 2 Years

...Read more View Product

£538.99

Dometic 12V 1000W Pure Sine Wave Inverter - DSP1012UK

Designed to turn 12 V battery power into pure 230 V AC, this compact sine wave inverter ensures reliable operation of electric devices up to 1000 W from the vehicle battery. Integrated protection circuits prevent damage by overload, overheat, over- and under-voltage. The automatic standby mode saves energy. Value for Money Sensitive household devices like electric toothbrushes, laptops, TVs or DVD players require a pure 230 V AC voltage, like that from your power socket at home. This is exactly what our SinePower DSP sine wave inverters provide. The compact devices give you incredible value for money: energy-saving standby mode, smart protection circuits to prevent damage in case of an overload, and a superbly quiet fan. Features Pure sine wave 230 V AC output voltage is suitable for sensitive electronic devices Automatic restart after overload, over- or under-voltage Wide DC input voltage range – ideal for vehicles with EURO 6 emission standard Quiet fan is load and temperature-controlled Energy-saving standby mode with automatic wake-up function Remote control panel included as standard Easy installation in horizontal or vertical position Voltage 12V Continuous Power 1000W Output Voltage 230V Efficiency >90 % Dimensions H230 x W220 x D80mm Weight 3.1Kg Warranty 2 Years

...Read more View Product

£2,450.00

Victron Energy Quattro 12/5000 12V 5000VA - QUA125020000

Similar to the MultiPlus, the Quattro 12/5000/220-100 is also a combined inverter and charger. Additionally it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation. Features of the Quattro 12/5000-220-100 Two AC Inputs & two AC Outputs The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output. Unique PowerAssist feature The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. Virtually unlimited power thanks to parallel operation Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities. Remote Monitoring and Control When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Quattro and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Quattro to auto starting a backupgenerator and more… Want to have perfect control over your system from wherever you are whilst using your Quattro 12/5000, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. The MK3-USB allows the Quattro to connect to a computer for configuration and firmware updates. Brand Victron Energy Manufacturer Part Number QUA125020000 GTIN 8719076024118 Voltage 12V Cont. Output Power at 25°C 5000VA Peak Power 10000W Output AC Voltage 230V Transfer Switch Yes Charge Current House Battery 220A Charge Current Starter Battery 4A Protection Category IP21 Efficiency 94% Bluetooth Compatible No Dimensions H470 x W350 x D280mm Weight 34Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£579.99

NDS Energy Smart-In Pure Sine Wave Inverter 12V 1500W - SP1500-12

SMART-IN PURE with IVT function is a line of inverters with an integrated system of priority (Priority Switch type). This special IVT function, through the two input and output 230V sockets, allows the management of the voltage that comes out from the inverter connected to the battery and to the external mains When the electronic network is available is connected to the external grid, it will have the priority in order to preserve the battery; otherwise, when the main is disconnected, the inverter use the battery to supply the 230V. Distinctive Features: By-pass integrated function Relay time change from inverter 230 VAC to external main= 20 ms Relay time change from 230 VAC external main to inverter = 100 ms What is the IVT function? More frequently, the inverter is the only solution for powering loads in the vehicle, but its dimensions and power (above 1000W) make it impractical to move as required. The IVT function is a priority system that allows the inverter to automatically power itself from the 230V mains, when available, and return to using the battery when necessary. This function makes it possible to safely connect the inverter output to the vehicle’s electrical circuit, so as to always have all the sockets powered, leaving the inverter conveniently installed near the leisure battery Input Voltage 12V Continuous Power 1500W Peak Power 4000W Output Voltage 230Vac Cables Included 25mm2 Long 80cm Dimensions L325 x W270 x D108mm Warranty 2 Years Datasheet NDS Energy Smart-In Pure Sine Wave Inverter 12V 1500W - SP1500-12

...Read more View Product

£339.99

NDS Energy Smart-In Pure Sine Wave Inverter 12V 1000W - SP1000-12

SMART-IN PURE with IVT function is a line of inverters with an integrated system of priority (Priority Switch type). This special IVT function, through the two input and output 230V sockets, allows the management of the voltage that comes out from the inverter connected to the battery and to the external mains When the electronic network is available is connected to the external grid, it will have the priority in order to preserve the battery; otherwise, when the main is disconnected, the inverter use the battery to supply the 230V. Distinctive Features: By-pass integrated function Relay time change from inverter 230 VAC to external main= 20 ms Relay time change from 230 VAC external main to inverter = 100 ms What is the IVT function? More frequently, the inverter is the only solution for powering loads in the vehicle, but its dimensions and power (above 1000W) make it impractical to move as required. The IVT function is a priority system that allows the inverter to automatically power itself from the 230V mains, when available, and return to using the battery when necessary. This function makes it possible to safely connect the inverter output to the vehicle’s electrical circuit, so as to always have all the sockets powered, leaving the inverter conveniently installed near the leisure battery Input Voltage 12V Continuous Power 1000W Peak Power 3000W Output Voltage 230Vac Cables Included 16mm2 Long 80cm Dimensions L305 x W270 x D108mm Warranty 2 Years Datasheet NDS Energy Smart-In Pure Sine Wave Inverter 12V 1000W - SP1000-12

...Read more View Product

£229.99

NDS Energy Smart-In Pure Sine Wave Inverter 12V 600W - SP600-12

SMART-IN PURE with IVT function is a line of inverters with an integrated system of priority (Priority Switch type). This special IVT function, through the two input and output 230V sockets, allows the management of the voltage that comes out from the inverter connected to the battery and to the external mains When the electronic network is available is connected to the external grid, it will have the priority in order to preserve the battery; otherwise, when the main is disconnected, the inverter use the battery to supply the 230V. Distinctive Features: By-pass integrated function Relay time change from inverter 230 VAC to external main= 20 ms Relay time change from 230 VAC external main to inverter = 100 ms What is the IVT function? More frequently, the inverter is the only solution for powering loads in the vehicle, but its dimensions and power (above 1000W) make it impractical to move as required. The IVT function is a priority system that allows the inverter to automatically power itself from the 230V mains, when available, and return to using the battery when necessary. This function makes it possible to safely connect the inverter output to the vehicle’s electrical circuit, so as to always have all the sockets powered, leaving the inverter conveniently installed near the leisure battery Input Voltage 12V Continuous Power 600W Peak Power 1500W Output Voltage 230Vac Cables Included 10mm2 Long 80cm Dimensions L245 x W140 x D70mm Warranty 2 Years Datasheet NDS Energy Smart-In Pure Sine Wave Inverter 12V 600W - SP600-12

...Read more View Product

£939.00

Iconica 6000W 48V Hybrid Off Grid Solar Inverter With 120A Mppt &120A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica 6000W 48V hybrid inverter intelligently combines the functions of a 6000W pure sine wave inverter, 120A MPPT solar charge controller and a 120A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings. This inverter features the rare and unique ability to power AC appliances without connection to a battery - directly from solar power. This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent, or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g., remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts. Key functions: 1. 6000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 6000VA of continuous power with a strong peak power handling capability of up to 12000VA (to start powerful appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 6000W high solar input MPPT Solar charge controller: Regulates the input from the solar panels and charges the batteries at up to 120A, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. Advanced MPPT technology extracts the maximum possible output from the solar panels and operates at up to 98% efficiency. This inverter is therefore well-suited to systems with a large and powerful solar array, with a maximum allowed solar input of 6000W. Performance data for the solar array is displayed on the LCD screen. 3. Enhanced 120A Smart battery charger: Designed to enable safe, efficient, and fast (up to 120A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages. 4. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 8 further inverters), offering the possibility of large-scale system expansion, with up to 54kw of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately). 5. Inbuilt Wi-Fi connectivity: The integrated Wi-Fi function allows the inverter to be monitored remotely via the Watchpower mobile app - a free mobile app available for Android and iOS devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/battery/AC voltage, charging current, battery capacity etc. Additional intelligent features: The Iconica 6000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include: - Load power without a battery: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. By powering loads using the energy directly supplied from the solar panels, this Iconica inverter offers a uniquely independent and versatile power system, free from batteries if preferred. Removing the need for batteries also increases the efficiency of the energy generated from the solar array by reducing the power losses that this transfer of energy would usually cause. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. For example, if 4000W of solar power is flowing into the inverter, 2000W can be used to run appliances whilst the remaining 2000W will be used for charging the battery bank. - Output source priority: This intelligent feature allows the user to set output source preferences (solar/battery power/mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g., which source of energy is given priority for the AC output if solar power is insufficient/if battery voltage is too low/ if mains is unavailable, etc. - Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/using a combination of solar power and mains power/from mains power only etc. - A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, timer setting for output source priority and charger source priority, auto-restart options, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - Illuminated LCD screen: The easy-to-read and comprehensive 4.3-inch LCD colour screen displays vital statistics and settings which are easily changeable by use of the 4 touchable function keys. The displayable information includes but is not limited to: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current, real time clock and the daily/monthly/yearly generated power. - Customisable built-in RGB light ring: Can be programmed to smartly present data in the form of customisable colours such as the battery capacity percentage, energy source (solar/mains/battery), battery charge/discharge status, solar input power and load percentage. This provides a pleasant visual experience as well as enabling you to effortlessly see the system status at a glance. - Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/battery/AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit (purchased separately). By connecting via this method, the user will unlock access to exclusive features such as email status updates for the inverter, remote system monitoring from any location and much more. - Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. - Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level. - Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility: This hybrid inverter is suitable for 48V flooded, sealed GEL/AGM lead-acid and Lithium batteries with pre-defined charging programs (consult the battery supplier for advice on Lithium battery charging settings). A user-defined battery type with numerous customisable settings is also available for charging other battery types.

...Read more View Product

£1,922.00

Victron Energy Inverter RS 48/6000 230V Smart Solar – PIN482601000

The Inverter RS 48/6000 230V Smart Solar is a combination of a powerful 48VDC, 6kVA 230VAC inverter and a high voltage, 80-450VDC, 4kW MPPT solar charger. Thanks to its modern design and high frequency technology the inverter only weighs 11kg and has an excellent efficiency, low standby power, and very quiet operation. The inverter is equipped with a display to read out battery, inverter, and solar charger details. These parameters can also be read out via Bluetooth by the VictronConnect app. In addition to this, the inverter has a VE.Can Port for connection to a GX device for system monitoring; and VE.Direct port for connection to a GlobalLink 520. Features of the RS 48/6000 230V Smart Solar Off-Grid solar inverter The Inverter RS Smart Solar 48/6000 is a 48V 6kVA Inverter with 450VDC 4kWp PV input. It is used in off-grid solar applications where AC power is required. Combination of an inverter, bi-directional DC-DC converter and MPPT The inverter produces a perfect sine wave, able to supply high powered appliances. It is supplied by a bi-directional DC-DC converter, that can either charge the battery when excess solar power is available or convert from the battery when it is needed. Wide MPPT voltage range 80 – 450VDC, with a 120VDC PV startup voltage. Light weight, efficient and quiet Thanks to high frequency technology and a new design this powerful inverter weighs only 11kg. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation. Display and Bluetooth The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Bluetooth enabled device. In addition, Bluetooth can be used to set up the system and to change settings with VictronConnect. VE.Can and VE.Direct port For connection to a GX device for system monitoring, data logging, and remote firmware updates of the RS 48/6000 Smart Solar. Built in PV isolator Both parallel PV strings connected to the MC4 plugs can be safely isolated with the large built-in switch on the bottom of the unit. I/O Connections Programmable Relay, temperature sensor and voltage sensor connections. The remote input can also be configured to accept the Victron smallBMS. Control over system Want to have perfect control over your system from wherever you are whilst using your Inverter RS 48/6000 Smart Solar, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Brand Victron Energy Manufacturer Part Number PIN482601000 GTIN 8719076048176 Voltage 48V Cont. Output Power at 25°C 6000VA Peak Power 9 kW for 3 seconds Output AC Voltage 230V Protection Category IP21 Bluetooth Enabled Yes Dimensions H425 x W440 x D125mm Weight 11Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£1,689.99

Iconica Max 10000W 48V Hybrid Off Grid Solar Inverter With 10000W Solar Input, Dual-Input 100A 500V Mppt Solar Controller, 150A Mains Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica MAX 10000W 48V hybrid inverter intelligently combines the functions of a 10000W pure sine wave inverter, 100A MPPT solar charge controller with two independent inputs and an extremely powerful 150A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings. This inverter features the rare and unique ability to power AC appliances without connection to a battery - directly from solar power. This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent, or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g., remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts. Key functions: 1. 10000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 10000VA of continuous power with a strong peak power handling capability of up to 20000VA (to start powerful appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 10000W high solar input MPPT Solar charge controller: Two independent solar inputs can each accept up to 5000W of solar power. The MPPT charge controller regulates the input from the solar panels at up to 100A, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. Advanced MPPT technology extracts the maximum possible output from the solar panels and operates at up to 98% efficiency. This inverter is therefore well-suited to systems with large and powerful solar arrays, or two solar arrays with different panels or light conditions. Performance data for the solar arrays is displayed on the LCD screen. 3. Enhanced 150A Smart battery charger: Designed to enable safe, efficient, and fast (up to 150A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages. 4. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 5 further inverters), offering the possibility of large-scale system expansion, with up to 60KW of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Additional intelligent features: The Iconica MAX 10000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include: - Load power without a battery: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. By powering loads using the energy directly supplied from the solar panels, this Iconica inverter offers a uniquely independent and versatile power system, free from batteries if preferred. Removing the need for batteries also increases the efficiency of the energy generated from the solar array by reducing the power losses that this transfer of energy would usually cause. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. For example, if 4000W of solar power is flowing into the inverter, 2000W can be used to run appliances whilst the remaining 2000W will be used for charging the battery bank. - Output source priority: This intelligent feature allows the user to set output source preferences (solar/battery power/mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g., which source of energy is given priority for the AC output if solar power is insufficient/if battery voltage is too low/if mains is unavailable, etc. - Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/using a combination of solar power and mains power/from mains power only etc. - A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, timer setting for output source priority and charger source priority, auto-restart options, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - DC output connectors: Used to provide emergency power backup to all kinds of DC-powered equipment such as routers, modems, surveillance/alarm systems, set-top boxes and many other critical telecom equipment. There are 3 channels (current limit at 3A for each channel) which could be activated/disabled manually either through LCD operation or the power switch beside the DC jacks. - Illuminated LCD screen: The easy-to-read and comprehensive 5-inch LCD colour screen displays vital statistics and settings which are easily changeable by use of the 4 touchable function keys. This information includes but is not limited to: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current, real time clock and the daily/monthly/yearly generated power. - Customisable built-in RGB light ring: Can be programmed to smartly present data in the form of customisable colours such as the battery capacity percentage, energy source (solar/mains/battery), battery charge/discharge status, solar input power and load percentage. This provides a pleasant visual experience as well as enabling you to effortlessly see the system status at a glance. - Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/battery/AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/Excel formats from the PC software. This inverter also has the potential to send data to a mobile app using the built-in wi-fi kit, or to an online user portal a Wi-Fi connection kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email/push notification/SMS status updates for the inverter, remote system monitoring from any location and much more. - Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. - Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level. - Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1, 2 or 3 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility: This hybrid inverter is suitable for 48V flooded, sealed GEL/AGM lead-acid and Lithium batteries with pre-defined charging programs (consult the battery supplier for advice on Lithium battery charging settings). A user-defined battery type with numerous customisable settings is also available for charging other battery types. Inverter specifications: Nominal battery voltage: 48V Continuous power output: 10000W/10000VA (220-240V AC) Surge power: 20000VA Output frequency: 50/60Hz (auto sensing) Output waveform: Pure sine wave DC output voltage: 12Vdc ± 5%, 100W Maximum solar input power: 5000W per input (10000W total) Maximum solar input current: 18A per input Maximum open circuit solar input voltage: 500Vdc MPPT solar operating voltage: 90Vdc - 450Vdc Maximum solar charging current: 150A Maximum mains AC charging current: 150A Maximum charge current: 150A Peak efficiency: 93% Operating temperature: -10°C to 50°C Supplied with solar connectors, cable glands, PC connection cable and PC software CD Size: 158.4 x 503.6 x 530.8 mm Weight: 20 kg IC2-MX10000-48 manual IC2-MX10000-48_manual Iconica Watchpower manual Iconica WatchPower Manual IC2-MX10000-48 Datasheet IC2-MX10000-48_datasheet

...Read more View Product

£769.99

Iconica 5000W 48V Hybrid Off Grid Solar Inverter With 80A Mppt And 100A Mains Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica 5000W 48V hybrid inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A MPPT solar charge controller and a 100A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This inverter features the rare and unique ability to power AC appliances without connection to a battery - directly from solar power.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent, or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g., remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 5000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 5000VA of continuous power with a strong peak power handling capability of up to 10000VA (to start powerful appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 5000W high solar input MPPT Solar charge controller: Regulates the input from the solar panels and charges the batteries at up to 80A, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. Advanced MPPT technology extracts the maximum possible output from the solar panels and operates at up to 98% efficiency. This inverter is therefore well-suited to systems with a large and powerful solar array, with a maximum allowed solar input of 5000W. Performance data for the solar array is displayed on the LCD screen. 3. Enhanced 100A Smart battery charger: Designed to enable safe, efficient, and fast (up to 100A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 8 further inverters), offering the possibility of large-scale system expansion, with up to 45kw of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately).5. Inbuilt Bluetooth connectivity: The integrated Bluetooth function allows the inverter to be monitored remotely via the Watchpower mobile app - a free mobile app available for Android devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/battery/AC voltage, charging current, battery capacity etc.Additional intelligent features:The Iconica 5000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Load power without a battery: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. By powering loads using the energy directly supplied from the solar panels, this Iconica inverter offers a uniquely independent and versatile power system, free from batteries if preferred. Removing the need for batteries also increases the efficiency of the energy generated from the solar array by reducing the power losses that this transfer of energy would usually cause. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. For example, if 4000W of solar power is flowing into the inverter, 2000W can be used to run appliances whilst the remaining 2000W will be used for charging the battery bank. - Output source priority: This intelligent feature allows the user to set output source preferences (solar/battery power/mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g., which source of energy is given priority for the AC output if solar power is insufficient/if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/using a combination of solar power and mains power/from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated removable LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc. The LCD display is removable and can be positioned up to 20m away from the inverter for remote system monitoring (requires additional basic RJ45 connection cable – not included). - Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/battery/AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email/push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent overheating of the components. Inverter specifications:Nominal battery voltage: 48VContinuous power output: 5000W/5000VA (220-240V AC)Surge power: 10000VAOutput frequency: 50 Hz/60 HzOutput waveform: Pure sine waveMaximum solar input power: 5000WMaximum open circuit solar input voltage: 450VSolar MPPT operating voltage: 120-430V DCMaximum Input Current: 18AMaximum solar charging current: 80AMaximum mains AC charging current: 100AMaximum combined charging current: 100APeak efficiency: 90%Solar / AC charger max efficiency: 98%Operating temperature: -10°C to 50°CSupplied with a PC connection cable and PC software CDParalleled operation with up to 8 further units, using a parallel connection kit(s)Size: 120 x 295 x 468 mmWeight: 12 kg

...Read more View Product

£979.99

Iconica 5000W 48V Rack-Compatible Off Grid Solar Inverter, 4000W Solar Input, 80A Mppt, 60A Charger, Parallel Capability

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica 5000W 48V hybrid inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A MPPT solar charge controller and a 60A smart battery charger in one single unit. This model can accept input from solar panels, mains power/generator and a battery - either from a single or combination of input sources. In addition to its hybrid capability, this innovative inverter features zero transfer time which enables instant 0ms transfer from mains to battery mode when the mains power is interrupted. In addition the inverter has advanced communication functions including inbuilt Wi-Fi monitoring, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features a zero transfer time Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts, and cabins or narrowboats, yachts etc), IT systems requiring continuous operation in case of power failures, as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 5000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 5000W of continuous power with a strong peak power handling capability of up to 10000VA (to start appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 80A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.3. Enhanced 60A Smart battery charger: Designed to enable safe, efficient and fast (up to 60A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. UPS zero transfer time: Offers instant 0ms transfer from mains to battery mode when mains power is interrupted (normal speed of transfer for other inverters is 15-20ms). This improved UPS functionality allows critical IT loads such as computers and servers to operate continuously in case of power failures.5. Rack-compatible design: The construction of the inverter case allows it to be easily slotted into a rack, for convenient installation of multiple inverters or rack-compatible battery systems into one unit.6. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 8 further inverters), offering the possibility of large scale system expansion, with up to 45kW of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately). 7. Inbuilt Wi-Fi connectivity: The integrated wi-fi function allows the inverter to be monitored remotely using the Watchpower app from the Apple app store or the Watchpower Wi-Fi app from the Google Play store. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc.Additional intelligent features:The Iconica 5000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences (solar/battery power/mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/if battery voltage is too low/if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/using a combination of solar power and mains power/from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/battery/AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats from the PC software. This inverter also has the potential to send data to a mobile app using the built-in wi-fi kit, or to an online user portal a Wi-Fi connection kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- USB On-the-Go function: The inverter is supplied with a USB drive which allows the user to facilitate upload/download of system data.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. Compatibility:This hybrid inverter is suitable for 48V flooded, sealed GEL/AGM lead-acid and Lithium batteries with pre-defined charging programs (consult the battery supplier for advice on Lithium battery charging settings). A user-defined battery type with numerous customisable settings is also available for charging other battery types.Please note that in order to enable the solar charging or direct operation of the loads from solar panels, your solar array must meet the minimum MPPT input voltage requirement of the inverter of 60V (several solar panels connected in series). Inverter specifications: Nominal battery voltage: 48V Continuous power output: 5000W/5000VA (220-240V AC) Surge power: 10000VA Output frequency: 50 Hz/60 Hz Output waveform: Pure sine wave Maximum solar input power: 4000W Maximum open circuit solar input voltage: 145V (open circuit) MPPT operating solar voltage: 60 - 115 V Maximum solar charging current: 80A Maximum mains AC charging current: 60A Maximum combined charging current: 140A Peak efficiency: 93% Solar/AC charger max efficiency: 98% Operating temperature: 0°C to 55°C Supplied with PC connection cable and PC software CD Size: 466.3 x 438 x 130.8 mm Weight: 15 kg

...Read more View Product

£1,541.99

Victron Energy Inverter RS 48V 6000VA Smart – PIN482600000

The Inverter RS Smart is a powerful 48 VDC, 6 kVA 230 VAC inverter. It features a modern design and high frequency technology, weighing only 11kg and has excellent efficiency, low standby power, and very quiet operation. The inverter is equipped with a display to read out battery and inverter details. These parameters can also be read out via Bluetooth by the VictronConnect app. In addition to this, the inverter has a VE.Can Port, for connection to a GX device for system monitoring. Features Light weight, efficient and quiet Thanks to high frequency technology and a new design this powerful inverter weighs only 11kg. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation. Display and Bluetooth The display reads battery and inverter parameters. The same parameters can be accessed with a smartphone or other Bluetooth enabled device. In addition, Bluetooth can be used to set up the system and to change settings with VictronConnect. VE.Can and VE.Direct port For connection to a GX device for system monitoring, data logging, and remote firmware updates. I/O Connections Programmable Relay, temperature sensor and voltage sensor connections. The remote input can also be configured to accept the Victron smallBMS. Brand Victron Energy Manufacturer Part Number PIN482600000 GTIN 8719076046059 Voltage 48V Cont. Output Power at 25°C 6000VA Peak Power 9kW for 3 seconds Output AC Voltage 230V Protection Category IP21 Bluetooth Enabled Yes Dimensions H425 x W440 x D125mm Weight 11Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£1,254.00

Victron Energy Phoenix Inverter 48V 5000VA VE.Bus – PIN485020000

Pure sine wave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds. SinusMax – Superior engineeringDeveloped for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem free, to any load. Parallel and 3-phase operation capabilityUp to 6 Phoenix Inverters can operate in parallel to achieve higher power output. Six 24 V 5000 VA units, for example, will provide 24 kW / 30 kVA output power. Operation in 3-phase configuration is also possible. Features SinusMax – Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. Virtually unlimited power thanks to parallel and 3-phase operation capability Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible. To transfer the load to another AC source: the automatic transfer switch If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds). Communications interface These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control. Brand Victron Energy Manufacturer Part Number PIN485020000 GTIN 8719076023883 Voltage 48V Cont. Output Power at 25°C 5000VA Peak Power 10000W Output AC Voltage 230V Protection Category IP21 Efficiency 95% Bluetooth Enabled No Dimensions H444 x W328 x D240mm Weight 30Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£717.99

Sterling Power Pro Combi S+ 12/1600 Inverter Charger – PCSP121600

Sterling Power Pro Combi S+ 12/1600 Inverter Charger – PCSP121600 The Pro Combi S+ is Sterling’s new inverter charger. It is a bespoke unit that has an attractive new design. The unit is lighter, smaller, yet more powerful than its predecessor. New splash proof design offering some protection against the odd water spill. The Combi S+ also comes with an auxiliary charging output to allow the user to charge their starter battery whilst bulk charging their main battery bank. The auxiliary charging is simply a module that can be installed and allows the user to charge 12V from a 12V or 24V from a 24V or even a combination of them as it is simply a module (e.g. 12V from a 24V unit), unit built to IP22. Features Sterling Power’s Combi S+ range of Inverter / Chargers are new to 2016. They arrive in a bespoke and attractive waterproof enclosure (IP55). New, lighter and smaller unit. Refer to the weights and dimensions in the table below. No extra length attributed to end cover caps etc as all AC and DC connectors are now neatly integrated into the unit. Extremely low quiesent current: From 0.1A with power saver on and 0.5A with power saver off. The additional 5A auxiliary charging output port is a new feature of the S+ model. It allows the user to charge the starter battery (example). Also, you can pick and mix. For example, have a 12V main unit with a 24V output port, or vice versa. 1300W contiunous. 1600W for 10 minutes. 2.5KW for 10-15 seconds. Good overload capability. 8 Battery type selectors. All with their own 4 stage charging profiles. Remote control panel included. The remote is removable and can be replaced with a blank panel. The switch panel can then be remotely mounted using the supplied extension lead (10 meters). Battery Charger only select option. Allows unit to be set, so in event of shore power failure the inverter does not engage. The Battery chargers across the range are larger in current rating. 50A at 12V – 35A for 24V. Neutral – Earth bonding link when on inverter mode to comply with latest regulations. This allows RCD breakers to work. Power Factor Corrected (PFC) This unit delivers a unity (0.99) power factor. Features a power saver function and battery charger power reduction. Great for smaller power supplies and gensets. Brand Sterling Power Manufacturer Part Number PCSP121600 Nominal VA 1600 Dimensions L225 x W205 x H230mm Weight (kg) 8.5 Warranty 2 Years

...Read more View Product

£1,579.00

Sterling Power Pro Combi S Pure Sine Wave Inverter 24V 3500W – PCS243500

The new Pro Combi range is designed to be very competitive, no frills, high performance, and value for money products, presented in a simple, easy to install and use style.If you require power assist, parallel connection, three phase output functions or any other enhanced combi features then this range is not for you. If you’re not familiar with these things this ProCombi is perfect for you. Modern combis are getting more and more complex, with each company trying to out do the next with abilities beyond the understanding and requirements of most people. This detracts from the combi’s main strength of being easy to install and easy to use. There is, no doubt, a market for the advanced functions but the vast majority of combi users simply do not need them and never will. Most people simply require the unit to act as a high performance constant current battery charger when on mains power then cross over to act as an efficient inverter when on battery – and that’s it!The problem with enhanced functions is, even if they are not used, they eat up valuable power. The more functions on a product running (even though you do not use them) the higher the quiescent current on the inverter (the current the unit uses itself to operate). Complex combis at 12V can use as much as 9.5 A, whereas, Pro Combi can use as little as 2A. Also, a lot of the expensive combis do not even have a power save function which can drop the combi power consumption to as little as 0.2A when off load, some combis continue to consume 2A + even when there is no load.Sterling has reversed this trend with this Pro Combi range by stripping away the unnecessary features from a complex combi saving money. The end result is a simple, straight forward product that does what you think it should. Using our years of experience in this market we have tailored the product range to suit 90% of people purchasing Combis. Features 30 amp through current P.F.C. (power factor correction) Includes remote control with 10m cable. 4 step progressive charging 8 battery type selector Charger only select option (on S models only) Earth – neutral link when on inverter mode to comply with latest regulations Brand Sterling Power Manufacturer Part Number PCS243500 Voltage 24 Power (W) 3500 Warranty 2 Years

...Read more View Product

£999.00

Sterling Power Pro Combi S Pure Sine Wave Inverter 24V 2500W – PCS242500

The new Pro Combi range is designed to be very competitive, no frills, high performance, and value for money products, presented in a simple, easy to install and use style.If you require power assist, parallel connection, three phase output functions or any other enhanced combi features then this range is not for you. If you’re not familiar with these things this ProCombi is perfect for you. Modern combis are getting more and more complex, with each company trying to out do the next with abilities beyond the understanding and requirements of most people. This detracts from the combi’s main strength of being easy to install and easy to use. There is, no doubt, a market for the advanced functions but the vast majority of combi users simply do not need them and never will. Most people simply require the unit to act as a high performance constant current battery charger when on mains power then cross over to act as an efficient inverter when on battery – and that’s it!The problem with enhanced functions is, even if they are not used, they eat up valuable power. The more functions on a product running (even though you do not use them) the higher the quiescent current on the inverter (the current the unit uses itself to operate). Complex combis at 12V can use as much as 9.5 A, whereas, Pro Combi can use as little as 2A. Also, a lot of the expensive combis do not even have a power save function which can drop the combi power consumption to as little as 0.2A when off load, some combis continue to consume 2A + even when there is no load.Sterling has reversed this trend with this Pro Combi range by stripping away the unnecessary features from a complex combi saving money. The end result is a simple, straight forward product that does what you think it should. Using our years of experience in this market we have tailored the product range to suit 90% of people purchasing Combis. Features 30 amp through current P.F.C. (power factor correction) Includes remote control with 10m cable. 4 step progressive charging 8 battery type selector Charger only select option (on S models only) Earth – neutral link when on inverter mode to comply with latest regulations Brand Sterling Power Manufacturer Part Number PCS242500 Voltage 24 Power (W) 2500 Warranty 2 Years

...Read more View Product

£1,579.00

Sterling Power Pro Combi S Pure Sine Wave Inverter 12V 3500W – PCS123500

The new Pro Combi range is designed to be very competitive, no frills, high performance, and value for money products, presented in a simple, easy to install and use style.If you require power assist, parallel connection, three phase output functions or any other enhanced combi features then this range is not for you. If you’re not familiar with these things this ProCombi is perfect for you. Modern combis are getting more and more complex, with each company trying to out do the next with abilities beyond the understanding and requirements of most people. This detracts from the combi’s main strength of being easy to install and easy to use. There is, no doubt, a market for the advanced functions but the vast majority of combi users simply do not need them and never will. Most people simply require the unit to act as a high performance constant current battery charger when on mains power then cross over to act as an efficient inverter when on battery – and that’s it!The problem with enhanced functions is, even if they are not used, they eat up valuable power. The more functions on a product running (even though you do not use them) the higher the quiescent current on the inverter (the current the unit uses itself to operate). Complex combis at 12V can use as much as 9.5 A, whereas, Pro Combi can use as little as 2A. Also, a lot of the expensive combis do not even have a power save function which can drop the combi power consumption to as little as 0.2A when off load, some combis continue to consume 2A + even when there is no load.Sterling has reversed this trend with this Pro Combi range by stripping away the unnecessary features from a complex combi saving money. The end result is a simple, straight forward product that does what you think it should. Using our years of experience in this market we have tailored the product range to suit 90% of people purchasing Combis. Features 30 amp through current P.F.C. (power factor correction) Includes remote control with 10m cable. 4 step progressive charging 8 battery type selector Charger only select option (on S models only) Earth – neutral link when on inverter mode to comply with latest regulations Brand Sterling Power Manufacturer Part Number PCS123500 Voltage 12 Power (W) 3500 Warranty 2 Years

...Read more View Product

£1,710.00

VICTRON ENERGY MULTIPLUS 24/5000/120-100 VE.BUS – PMP245021010

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications). On-site Monitoring and control Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232). Remote Monitoring and control Color Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. Remote configuring When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely Brand Victron Energy Manufacturer Part Number PMP245021010 GTIN 8719076024033 PowerControl/PowerAssist Yes Transfer Switch 100A Cont. Output Power at 25°C 5000VA Peak power 10000W Maximum efficiency 94% Zero load power 30W Charge Current House Battery 120A Charge Current Starter Battery 4A (12V and 24V models only) Battery Temperature Sensor Yes Programmable Relay Yes VE.Bus Communication Port For parallel and three phase operation, remote monitoring and system integration Remote on-off Yes Protection Category IP21 Battery-Connection Four M8 bolts (2 plus and 2 minus connections) Dimensions H444 x W328 x D240mm Weight 30Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£749.00

Victron Energy Phoenix Inverter Compact 12V 1600VA VE.Bus – CIN121620000

The Phoenix Inverter Compact is a pure sine wave inverter with a high efficiency. It is developed for professional duty and suitable for the wide range of applications.The Phoenix Inverters Compact is available from 1200VA up to 2000VA in 12V or 24V. Features SinusMax – Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. Virtually unlimited power thanks to parallel and 3-phase operation capability Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible. To transfer the load to another AC source: the automatic transfer switch If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds). Communications interface These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control. Brand Victron Energy Manufacturer Part Number CIN121620000 GTIN Brand Victron Energy Manufacturer Part Number CIN121620000 GTIN 8719076021636 Voltage 12V Cont. Output Power at 25°C 1600VA Peak Power 3000W Output AC Voltage 230V Protection Category IP21 Efficiency 92% Bluetooth Enabled No Dimensions H375 x W214 x D110mm Weight 10Kg Warranty 5 Years Voltage 12V Cont. Output Power at 25°C 1600VA Peak Power 3000W Output AC Voltage 230V Protection Category IP21 Efficiency 92% Bluetooth Enabled No Dimensions H375 x W214 x D110mm Weight 10Kg Warranty 5 Years

...Read more View Product

£360.00

Victron Energy Phoenix Inverter Compact 12V 1200VA VE.Bus – CIN121220000

The Phoenix Inverter Compact is a pure sine wave inverter with a high efficiency. It is developed for professional duty and suitable for the wide range of applications.The Phoenix Inverters Compact is available from 1200VA up to 2000VA in 12V or 24V. Features SinusMax – Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. Virtually unlimited power thanks to parallel and 3-phase operation capability Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible. To transfer the load to another AC source: the automatic transfer switch If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds). Communications interface These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control. Brand Victron Energy Manufacturer Part Number CIN121220000 GTIN 8719076021629 Voltage 12V Cont. Output Power at 25°C 1200VA Peak Power 2400W Output AC Voltage 230V Protection Category IP21 Efficiency 92% Bluetooth Enabled No Dimensions H375 x W214 x D110mm Weight 10Kg Warranty 5 Years

...Read more View Product

£609.00

12v 2700w Invertor (Inc. Remote)

Pro Power Q are Sterling’s range of quasi / modified sine wave inverters. Quasi sine wave inverters work with most electrical appliances, including: hair dryers, phone, computer chargers, microwaves, kettles etc. Exceptions to this are appliances which are thyristor controlled, for example, washing machines or bread makers. Features Cost Effective: Works out at around half the price of the Pure Sine Wave inverter, but works with around 95% of electrical products. 230V 50Hz and 110V 50Hz. UK / Europe domestic use and building site use Europe, and 110V 50Hz for building sites. Come with 24Kt gold plated connectors All inverters come pre-wired. Universal sockets available on some products. Quiet operation due to new larger fan. Relatively small footprint for the power size. The new turbo can inverter. Can lie flat or fits in standard cup holders in cars, lorrys vans etc. Model 12V 2700W – I122700 Brand Sterling Power Manufacturer Part Number I122700 Model 12V 2700W – I122700 Warranty 2 Years Weight (kg) 5.0 Dimensions L370 x W250 x D100mm DC (V) 12 Power (W) 2700 Socket Type British/Euro

...Read more View Product

£89.99

12v 350w Invertor

All Sterling inverters are continuously rated, with all the usual overload, over voltage and low voltage cut outs, all the inverters come with cable and 24 kt gold connectors, in order to prevent battery terminal corrosion. Available in 230V for UK and Europe and also 110V for building sites / off vehicle use or for equipment supplied on boats made in the USA (not suitable for washing machine / some bread makers). Thermostatically controlled fans Overload, overheat, short circuit protected Standby-current: Efficiency: 85%-95% Incl. battery cable (1m length) Size: 150 x 150 x 65 Weight: 1.0kg Power (continuous) Watts: 350 Voltage DC: 12 Socket Type: British / Euro For cable information for all Sterling Products click here Instruction Manual PDF Product Information PDF

...Read more View Product

£59.99

Stering 12v 150w Inverter

All Sterling inverters are continuously rated, with all the usual overload, over voltage and low voltage cut outs, all the inverters come with cable and 24 kt gold connectors, in order to prevent battery terminal corrosion. Available in 230V for UK and Europe and also 110V for building sites / off vehicle use or for equipment supplied on boats made in the USA (not suitable for washing machine / some bread makers). Overload, overheat, short circuit protected Standby-current: Efficiency: 85%-95% No fans Size: 100mm oval 145L Weight: 0.3kg Power (continuous) Watts: 150 Voltage DC: 12 Socket Type: Universal

...Read more View Product

£1,310.00

Victron Energy Phoenix Inverter 24V 5000VA VE.Bus - PIN245020000

Pure sine wave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds. SinusMax – Superior engineeringDeveloped for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem free, to any load. Parallel and 3-phase operation capabilityUp to 6 Phoenix Inverters can operate in parallel to achieve higher power output. Six 24 V 5000 VA units, for example, will provide 24 kW / 30 kVA output power. Operation in 3-phase configuration is also possible. Features SinusMax – Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. Virtually unlimited power thanks to parallel and 3-phase operation capability Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible. To transfer the load to another AC source: the automatic transfer switch If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds). Communications interface These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control. Brand Victron Energy Manufacturer Part Number PIN245020000 GTIN 8719076023760 Voltage 24V Cont. Output Power at 25°C 5000VA Peak Power 10000W Output AC Voltage 230V Protection Category IP21 Efficiency 94% Bluetooth Enabled No Dimensions H444 x W328 x D240mm Weight 30Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£1,389.99

Iconica 5500W 48V Hybrid Grid Tie / Off-Grid Solar Inverter With 6500W Solar Input, 60A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. Please note this is a 48V system. This Iconica hybrid grid-tie/off-grid 5500W 48V inverter with battery back up is a revolutionary grid-tie inverter which combines standard “feed-to-the-grid” solar functionality with a strong off-grid platform; transforming this inverter into a fully autonomous power station. While basic grid-tie inverters simply feed solar power automatically into the electrical grid, depleting your stores of solar energy, this hybrid Iconica grid tie/off-grid inverter encourages self-consumption of solar energy by keeping it stored in the battery bank and making it available now or for future use. In case of mains power failure, or when mains electricity is too expensive or impractical to use (e.g. due to poor quality of power), you can fully rely on the off-grid functionality of this inverter to provide you with a clean, stable and independent electricity supply.The inverter features three main operating modes: a) 100% grid-tie, b) grid-tie + battery back-up and c) 100% off-grid:a) Grid-tie operation: Energy generated by the solar panels is fed back to the grid. b) Grid-tie operation with Battery back-up: Generated solar power can be used to feed energy back to the grid, supply power to the load and charge the battery. Mains electricity can also be used to power the load and charge the battery. In this mode, the user can configure PV energy supply priority, charging source priority and load supply source priority. When solar power is not sufficient to power the load, or if mains power is unavailable, the battery will act as a 'back up' and continue to power the load (e.g. at night when there is no solar power or during a mains power cut). 'Peak' and 'Off-peak' times for electricity demand can also be set, in order to prioritise either load power supply or battery charging. c) Off-grid operation: Energy generated by the solar panels can be used to power the load or charge the battery. No power is fed back to the grid, however there is still the option to draw power from mains to power the load / charge the battery if needed. In this mode, the user can configure PV energy supply priority, charging source priority and load supply source priority. Using the ‘grid-tie + off-grid back-up’ mode, this inverter provides numerous advantages over standard grid tie inverters, such as:- Undisrupted operation during power outages: During interruptions to the grid power supply, standard grid-tie inverters will turn off completely; leaving the user without electricity until power is restored and wasting valuable solar energy as the panels are rendered useless. To completely avoid this problem, this inverter will use stored battery power to create an uninterrupted power supply (UPS), keeping appliances running and continuing to harvest energy from the solar panels.- Lower electricity costs: With a rise in electricity prices and a fall in / removal of subsidies for grid-fed power, the importance of maximising self-consumption is stronger than ever before. This grid-tie + back-up feature encourages self-consumption by keeping a large amount of power ‘in-house’ and only feeding back to the grid when there is excess solar energy. This captures as much solar energy as possible for your own use during costly periods – e.g. for economy 7 tariffs this energy can be utilised during ‘peak’ hours when electricity costs surge, meaning that power is only drawn from the grid during ‘off-peak’ times if needed.Additional intelligent features:The Iconica 5500W 48V hybrid grid-tie inverter boasts an abundance of unique features, providing enhanced functionality over other grid-tie, battery back-up and off-grid inverters. These include:- 3-in-1 hybrid functionality: Intelligent combination of a pure sine wave inverter with a strong peak power handling capability of up to 11000VA to start powerful appliances, an MPPT solar converter / charge controller with two inbuilt 500V MPP trackers for up to 6500W solar input from either one or two separate solar arrays at up to 98% efficiency, and an enhanced 60A smart mains charger designed to enable safe, efficient and fast unattended charging of a battery from a mains power source (utility power or a generator) - with full overcharge protection and multiple charging stages.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, max grid feed-in power, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, overload bypass, battery equalization stage characteristics and so on. The inverter is also supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats.- Advanced communication options: This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit or 3G connection kit (purchased separately). By connecting via either of these two methods, the user will unlock access to exclusive features such as SMS / email status updates for the inverter, remote system monitoring from any location and much more.- Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: operation mode, grid-tie status, charging source priority, output source priority, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current, fault indicators etc.Compatibility:This hybrid inverter is suitable for 48V flooded and sealed GEL/AGM lead-acid as well as Lithium batteries, with pre-defined charging programs for each type. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.Inverter specifications:Nominal battery voltage: 48VContinuous power output: 5500W / 5500VA (220-240V AC)Surge power: 11000VAOutput frequency: 50Hz /60HzOutput waveform: Pure sine waveMaximum solar input power: 6500WMaximum open circuit solar input voltage: 500VSolar MPPT operating voltage: 120-450V DCMaximum solar input current: 13A per MPP trackerMaximum AC input current including bypass: 40AMaximum battery charging current from AC: 60AMaximum combined charging current from solar / AC: 60APeak efficiency: 93%Solar / AC charger max efficiency: 98%Operating temperature: -10°C to 40°CSize: 110 x 450 x 445 mmWeight: 16 kg The inverter conforms to G99 Engineering Recommendation for grid connection.The inverter is supplied with PV connectors, software CD, user manual, USB cable, RS-232 cable, surge protection device and mounting accessories.This product is covered by a 1 year manufacturer warranty

...Read more View Product

£889.99

Iconica 5000W 48V Hybrid Off Grid Solar Inverter With 4000W Solar Input, 80A 500V Mppt, 60A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. Please note this is a 48V system. The Iconica 5000W 48V hybrid inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A MPPT solar charge controller and a 60A smart battery charger in one single unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its hybrid capability, this innovative inverter features advanced communication functions including inbuilt Bluetooth, along with a menu full of highly customisable settings.This inverter features the rare and unique ability to power AC appliances without connection to a battery - directly from solar power.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts, and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 5000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 5000W of continuous power with a strong peak power handling capability of up to 10,000VA (to start appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. The inverter is able to take power from solar panels directly for its operation, even if the battery is not available.2. Inbuilt 80A MPPT Solar charge controller with high input voltage of up to 500V DC: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.3. Enhanced 60A Smart battery charger: Designed to enable safe, efficient and fast (up to 60A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. Inbuilt Bluetooth connectivity: The integrated Bluetooth function allows the inverter to be monitored remotely via the Watchpower mobile app - a free mobile app available for Android devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc.Additional intelligent features:The Iconica 5000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Load power without a battery: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. By powering loads using the energy directly supplied from the solar panels, this Iconica inverter offers a uniquely independent and versatile power system, free from batteries if preferred. Removing the need for batteries also increases the efficiency of the energy generated from the solar array by reducing the power losses that this transfer of energy would usually cause. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. For example, if 4000W of solar power is flowing into the inverter, 2000W can be used to run appliances whilst the remaining 2000W will be used for charging the battery bank. - Simplified installation: The exceptionally high solar input voltage of this inverter of up to 500V DC allows the solar panels to be connected in series in one single chain. This eliminates the need for complicated multiple string connections, blocking diodes and expensive thick cables.- Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated removable LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc. The LCD display is removable and can be positioned up to 20m away from the inverter for remote system monitoring (requires additional basic RJ45 connection cable – not included). - Advanced communication options: In addition to the integrated Bluetooth feature, this inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- USB On-the-Go function: The inverter is supplied with a USB drive which allows the user to facilitate upload/ download of system data.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- BMS connectivity: The inverter features a Battery Management System (BMS) port, offering the possibility to connect to an optional BMS.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components.The fan is also designed to be easily removed in order to simplify maintenance of the inverter.Compatibility:This hybrid inverter is suitable for 48V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.Please note that in order to enable the solar charging or direct operation of the loads from solar panels, your solar array must meet the minimum MPPT input voltage requirement of the inverter of 120V (several solar panels connected in series). If you are unsure whether 5000W is enough for your appliances, please refer to the following table: Table of typical power consumption of domestic appliances.Inverter specifications:Nominal battery voltage: 48VContinuous power output: 5000W/5000VA (220-240V AC)Surge power: 10000VAOutput frequency: 50HzOutput waveform: Pure sine waveMaximum solar input power: 4000WMaximum open circuit solar input voltage: 500V (open circuit)MPPT solar operating voltage: 120V - 450VMaximum solar charging current: 80AMaximum mains AC charging current: 60AMaximum combined charging current: 80APeak efficiency: 93%Solar / AC charger max efficiency: 98%Operating temperature: -10°C to 50°CSupplied with USB drive, PC connection cable and PC software CDSize: 44 x 30 x 11.5 cmWeight: 10 kg

...Read more View Product

£679.99

Iconica 3000W 48V Hybrid Off Grid Solar Inverter With 60A Mppt And 15A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. Please note this is a 48V system. The Iconica 3000W 48V hybrid inverter intelligently combines the functions of a 3000W pure sine wave inverter, 60A MPPT solar charge controller and a 15A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 3000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start powerful appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 60A MPPT Solar charge controller: Regulates the input from the solar panels to the batteries, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. Advanced MPPT technology extracts the maximum possible output from the solar panels and operates at up to 98% efficiency. This inverter is therefore well-suited to systems with a large and powerful solar array, with a maximum allowed solar input of 3000W. Performance data for the solar array is displayed on the LCD screen. 3. Inbuilt 15A Smart battery charger: Designed to enable safe and efficient unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.Additional intelligent features:The Iconica 3000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit or 3G connection kit (purchased separately). By connecting via either of these two methods, the user will unlock access to exclusive features such as SMS / email status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 48V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.If you are unsure whether 3000W is enough for your appliances, please refer to the following table: Table of typical power consumption of domestic appliances.Inverter specifications:Nominal battery voltage: 48VContinuous power output: 3000W / 3000VA (220-240V AC)Surge power: 6000VAOutput frequency: 50Hz /60 HzOutput waveform: Pure sine waveMaximum solar input power: 3000WMaximum open circuit solar input voltage: 145VSolar MPPT operating voltage: 60-115V DCMaximum solar charging current: 60AMaximum mains AC charging current: 15AMaximum combined charging current: 75APeak efficiency: 93%Solar / AC charger max efficiency: 98%Operating temperature: 0°C to 55°CSupplied with a PC connection cable and PC software CDSize: 479 x 295 x 140 mmWeight: 11.5 kg

...Read more View Product

£1,249.00

Victron Energy MultiPlus 12v Inverter Charger 12/3000/120-50 VE.Bus – PMP123021010

Victron Energy MultiPlus 12v Inverter Charger 12/3000/120-50 VE.Bus – PMP123021010 The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Brand Victron Energy Manufacturer Part Number PMP123021010 Voltage 12 Transfer Switch (A) 16 Cont. Output Power at 25°C (VA) 3000 Peak Power (W) 6000 Max Efficiency 93% Zero Load Power (W) 20 Charge Current House Battery (A) 120 Charge Current Starter Battery (A) 4 Battery Temperature Sensor Yes Programmable Relay Yes (3x) Remote on-off Yes Protection Category IP21 Dimensions H362 x W258 x D218mm Weight (kg) 19 Warranty 5 Years Country of Manufacture India

...Read more View Product

Out of Stock

£569.99

Sterling Power 1600W 12V Pro Power Pure Sine Wave Inverter SIB121600

Full Power System Kits

Shop By Application

Electrical Components

Power Banks

Victron Energy

Usage Styles

shop by application

shop electrical parts

Shop Power Banks

Shop Victron Energy

solar Panel Kits by size (w)

Solar Panel Kits by Vehicle

Solar Panel Kits by Price (£)

all solar panel kit categories

Solar Panels

solar panel cables & accessories

shop solar panel kits by size (W)

shop solar panel kits by vehicle

shop solar panel kits by price

shop all solar panel kit categories

shop solar panels by size (W)

shop solar panels by type

shop solar panel cables & accessories

Batteries

Battery Chargers

DC to DC charging

Battery & charging Accessories

Inverters

Victron Electrics

shop by battery type

shop by brand

shop by type

shop by kit

shop by type

shop by type

shop by BRAND

shop VICTRON ELECTRICS

WATER & PLUMBING

diesel heaters

Fridges & Freezers

cooking

ventilation & sky lights

Motorhomes

Motorhome Brands Power Upgrades

Full Power System Kits

Usage Styles

Shop By Application

shop by application

Electrical Components

shop electrical parts

Power Banks

Shop Power Banks

Victron Energy

Shop Victron Energy

solar Panel Kits by size (w)

shop solar panel kits by size (W)

Solar Panel Kits by Vehicle

shop solar panel kits by vehicle

Solar Panel Kits by Price (£)

shop solar panel kits by price

all solar panel kit categories

shop all solar panel kit categories

Solar Panels

shop solar panels by size (W)

shop solar panels by type

solar panel cables & accessories

shop solar panel cables & accessories

Batteries

shop by battery type

shop by brand

Battery Chargers

shop by type

DC to DC charging

shop by kit

Battery & charging Accessories

shop by type

Inverters

shop by type

shop by BRAND

Victron Electrics