Leisure Battery Chargers For Caravans, Campervans & Motorhomes

Don't let a flat leisure battery ruin your camping trip. Our range of high-quality leisure battery chargers ensures your caravan, campervan, or motorhome is always ready for adventure. From smart chargers to traditional models, we have the perfect solution to keep your battery in top condition. Extend your off-grid adventures with a reliable leisure battery charger.

Build Your Own Give Us A Call

60 Kits Found

Victron Energy Blue Smart IP22 Charger 12V 30A 1 Output – BPC123047022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC123047002 GTIN 8719076052364 Voltage 12V Charge Current 30A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Kit

Victron Energy Blue Smart IP22 Charger 12V 20A 1 Output – BPC122042022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space. Brand Victron Energy Manufacturer Part Number BPC122042002 GTIN 8719076037439 Voltage 12V Charge Current 20A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Kit

Victron Energy Blue Smart IP22 Charger 12V 15A 1 Output UK – BPC121542022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC121542022 GTIN 8719076041047 Voltage 12V Charge Current 15A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Kit

20A 12V Intelligent Automatic Multi-Stage Mains Battery Charger

This 20A 12V automatic multi-stage mains battery charger is designed to enable safe and efficient unattended charging of a 12V battery or battery bank from a mains power source (220-240V AC). This mains charger boasts an advanced 7 stage charging process which delivers faster and more efficient charging, whilst eliminating the risk of voltage fluctuations. This unit is able to charge either a single 12V battery, or several 12V batteries connected in parallel (batteries must be the same type, capacity and age). This mains battery charger is compatible with Lead Acid batteries, including AGM, Gel and Wet cell batteries. Key features: Safe unattended charging: the unit features inbuilt safety functions (protection against DC short circuit, overheating and overcharging), which allow the charger to be left permanently connected to the battery for unattended automatic charging. Unlike many other mains chargers, the charging voltage is also free from peaks which offers smooth uninterrupted charging. Continued charging during battery use: the charger will continue to operate while energy is drawn from the battery during use. The unit will maintain the charge if the battery is already at full capacity. Boost-charging feature: this preliminary charging stage can improve battery condition and recover lost capacity from older batteries. It improves the charge delivered to the batteries, thereby increasing battery life and preventing premature battery failure. Dead battery recovery: the desulphation stage is able to break down sulphation that occurs in batteries which have been left flat for extended periods of time, returning them back to full charge. Automatic temperature control: to maintain an optimal internal temperature, the inbuilt fan is automatically enabled when a high temperature or charging current is detected. LCD Display: shows vital information regarding the charging process (charging voltage / charging current / different charging stages). LED lights also indicate the battery type. Power pack function: can provide a direct supply of power to a 12V load (e.g. 12V fridge) with no battery connected (e.g. during battery replacement). This charger is also supplied with a 1.5m mains AC cable with a UK 3-pin plug, 1 x 0.5m DC battery cable and spare fuses. Specifications: Operating Voltage range (AC): 190V - 265V (full capacity) / 50 Hz DC output current: 20A DC output voltage: 12V Suggested battery capacity: 25 - 200Ah Bulk / absorption charging voltage: 14.2V - 14.8V DC (depending on the battery type) Float charging voltage: 13.2V - 13.8V (depending on the battery type) Efficiency: <88% Operating temperature range: 0°C - 40°C Inbuilt fan Isolated DC output Dimensions: 176 x 175 x 95 mm Weight: 1.0 kg

...Read more View Kit

Waitlist

£89.99

Sterling BM12123 Battery Maintainer.

This unit is perfect for keeping your campervan's starter battery topped up by transferring excess power from the leisure battery, which is especially useful when solar panels are charging the leisure battery. Once your leisure battery reaches about 13.3V, the unit activates, allowing surplus energy to flow to maintain the starter battery. While it doesn't offer fast charging or boosting, it mirrors the input voltage with only a small drop (typically around 0.2V less than the primary charge), which is more than sufficient to keep the starter battery topped up and cover small loads like the battery's internal discharge and the engine management system (up to 1A continuous). This feature is invaluable during periods of non-use, ensuring your starter battery stays healthy without the need for external charging. This unit is the perfect substitute for a dual-output solar charge controller. Instead of needing a solar controller with dual outputs to manage both your leisure and starter batteries, this unit simplifies the process by allowing excess power from the leisure battery to maintain the starter battery. With solar panels continuously topping up the leisure battery, this device efficiently manages the distribution of surplus energy, ensuring both batteries stay charged without the need for more complex or expensive equipment. It's an ideal solution for those looking to streamline their campervan's electrical system while keeping both batteries in good condition. Victron Dual Output MPPT Solar Charge Controller - It doesn't exist but this is the perfect alternative!

Victron Energy Blue Smart IP22 Charger 12V 15A 3 Outputs - BPC121544022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC121544002 GTIN 8719076037422 Voltage 12V Charge Current 15A Input Voltage 230V Number of Outputs 3 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Kit

10A 12V Intelligent Automatic Multi-Stage Mains Battery Charger

This 10A 12V automatic multi-stage mains battery charger is designed to enable safe and efficient unattended charging of a 12V battery or battery bank from a mains power source (220-240V AC). This mains charger boasts an advanced 7 stage charging process which delivers faster and more efficient charging, whilst eliminating the risk of voltage fluctuations. This unit is able to charge either a single 12V battery, or several 12V batteries connected in parallel (batteries must be the same type, capacity and age). This mains battery charger is compatible with Lead Acid batteries, including AGM, Gel and Wet cell batteries. Key features: Safe unattended charging: the unit features inbuilt safety functions (protection against DC short circuit, overheating, and overcharging), which allow the charger to be left permanently connected to the battery for unattended automatic charging. Unlike many other mains chargers, the charging voltage is also free from peaks which offers smooth uninterrupted charging. Continued charging during battery use: the charger will continue to operate while energy is drawn from the battery during use. The unit will maintain the charge if the battery is already at full capacity. Boost-charging feature: this preliminary charging stage can improve battery condition and recover lost capacity from older batteries. It improves the charge delivered to the batteries, thereby increasing battery life and preventing premature battery failure. Dead battery recovery: the desulphation stage is able to break down sulphation that occurs in batteries which have been left flat for extended periods of time, returning them back to full charge. Automatic temperature control: to maintain an optimal internal temperature, the inbuilt fan is automatically enabled when a high temperature or charging current is detected. LCD Display: shows vital information regarding the charging process (charging voltage / charging current / different charging stages). LED lights also indicate the battery type. Power pack function: can provide a direct supply of power to a 12V load (e.g. 12V fridge) with no battery connected (e.g. during battery replacement). This charger is also supplied with a 1.5m mains AC cable with a UK 3-pin plug, 1 x 0.5m DC battery cable with crocodile clips, and spare fuses. Specifications: Operating Voltage range (AC): 190V - 265V (full capacity) / 50 Hz DC output current: 10A DC output voltage: 12V Suggested battery capacity: 15 - 100Ah Bulk / absorption charging voltage: 14.2V - 14.8V DC (depending on the battery type) Float charging voltage: 13.2V - 13.8V (depending on the battery type) Efficiency: <88% Operating temperature range: 0°C - 40°C Inbuilt fan Isolated DC output Dimensions: 176 x 175 x 95 mm Weight: 1.0 kg

...Read more View Kit

Victron Energy Blue Smart IP65 Charger 6V/12V 1.1A UK – BPC120134024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC120134024R GTIN 8719076055532 Voltage 6/12V Charge Current 1.1A Input Voltage 230V Protection Category IP65 Efficiency 82% Bluetooth Enabled Yes Plug Type UK Dimensions H38 x W64 x D153mm Weight 0.4Kg Warranty 5 Years Country of Manufacture India

...Read more View Kit

Victron Energy Blue Smart IP67 Charger 12V 13A 1 Output – BPC121347026

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC121347026 GTIN 8719076055273 Voltage 12V Charge Current 13A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H85 x W211 x xD60mm Weight 1.8Kg Warranty 5 Years

...Read more View Kit

Victron Energy Blue Smart IP22 Charger 12V 30A 3 Outputs – BPC123048022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC123048002 GTIN 8719076052401 Voltage 12V Charge Current 30A Input Voltage 230V Number of Outputs 3 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type Uk Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Kit

Cyrix-ct 12/24V-120A Intelligent Battery Combiner

Efficient Power Management with Victron Cyrix-ct 12/24V-120A Intelligent Battery Combiner Maximize your energy solutions with the Victron Cyrix-ct 12/24V-120A Intelligent Battery Combiner, a state-of-the-art device designed for seamless battery management. Ideal for marine, RV, and off-grid applications, this robust battery combiner ensures optimal performance and reliability. Key Features: Intelligent Voltage Sensing: Automatically detects voltage levels, ensuring efficient charging and discharging between multiple battery banks. High Current Capacity: With a 120A continuous current rating, it effortlessly handles the demands of most electrical systems. Dual Voltage Compatibility: Perfectly suited for both 12V and 24V systems, making it a versatile choice for various setups. Priority Charging Feature: Prioritizes the charging of your main battery, ensuring critical operations are always powered. Bi-directional Charging: Allows for charging in both directions, enhancing the flexibility and efficiency of your power system. Overload Protection: Integrated protection mechanisms safeguard against overcurrent and short circuits, ensuring longevity and safety. Compact and Durable Design: Engineered for the toughest conditions, it's compact enough to fit in tight spaces and durable enough to withstand harsh environments. Benefits: Enhanced Battery Life: By intelligently managing the charge, it extends the life of your batteries. Energy Efficiency: Reduces energy waste, ensuring you get the most out of your power sources. Easy Installation: Simple setup process makes it accessible even for those with basic technical knowledge. Versatility: Ideal for a wide range of applications, from boats and RVs to renewable energy systems. Why Choose Victron Cyrix-ct 12/24V-120A? The Victron Cyrix-ct is more than just a battery combiner; it's a smart investment in your energy system. Its intelligent features and robust design make it a top choice for professionals and enthusiasts alike who demand reliability and efficiency. Whether you're sailing the seas, exploring the open road, or harnessing renewable energy, the Victron Cyrix-ct is your trusted partner in power management. Cyrix Battery Combiners: A Closer Look Cyrix Battery Combiners are a revolutionary solution in the realm of battery management. These devices are designed to maximize the efficiency and reliability of your battery systems, making them an ideal choice for a variety of applications. Understanding the Technology At the heart of Cyrix Battery Combiners is a microprocessor-controlled heavy-duty relay. This advanced technology ensures minimal voltage loss, a common issue with traditional diode isolators. By optimizing battery charging and discharging, Cyrix Battery Combiners maintain the health and longevity of your batteries. Functionality and Benefits One of the key functionalities of Cyrix Battery Combiners is their ability to automatically connect batteries in parallel during charging and disconnect them when the voltage drops below a certain level. This feature not only enhances the efficiency of your battery system but also its reliability. Diverse Applications Whether you're dealing with automotive, marine, off-grid, backup, or island systems, Cyrix Battery Combiners are up to the task. Their compatibility with various alternators and battery chargers makes them a versatile component in any power management setup. Easy Installation and Maintenance Installing and maintaining your Cyrix Battery Combiner is straightforward. The step-by-step guide ensures a hassle-free setup, and the tips provided help in maintaining optimal performance. In case of any issues, the troubleshooting section offers practical solutions. Conclusion In conclusion, Cyrix Battery Combiners are an essential component for anyone looking to enhance the efficiency and reliability of their battery systems. With their advanced technology and wide range of applications, they are a smart investment for both short-term performance and long-term battery health. Cyrix-ct Datasheet Cyrix-ct 12/24V-120A Intelligent Battery Combiner Datasheet Cyrix Wiring Diagram

...Read more View Kit

Victron Energy Blue Smart IP67 Charger 24V 5A 1 Output – BPC240531064R

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC240513006 GTIN 8719076035947 Voltage 24V Charge Current 5A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 94% Bluetooth Enabled Yes Plug Type CEE 7/7 Dimensions H85 x W211 x D60mm Weight 1.8Kg Warranty 5 Years Country of Manufacture India

...Read more View Kit

Victron Energy Blue Smart IP22 Charger 12V 20A 3 Outputs – BPC122043022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC122044002 GTIN 8719076037446 Voltage 12V Charge Current 20A Input Voltage 230V Number of Outputs 3 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 93% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Kit

Victron Energy Orion-Tr Smart 12/24V 15A (360W) Non-isolated DC-DC Charger – ORI122436140

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number ORI122436140 gtin 8719076048961 Voltage 12/24V Cont. Output Current 15A Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 88% Bluetooth Enabled Yes Dimensions H130 x W186 x D80mm Weight 1.8Kg Warranty 5 Years Country of Manufacture India

...Read more View Kit

Victron Energy Blue Smart IP67 Charger 12V 7A 1 Output – BPC120747026

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC120747026 GTIN 8719076035923 Voltage 12V Charge Current 7A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 93% Bluetooth Enabled Yes Plug Type CEE 7/7 Dimensions H85 x W211 x D60mm Weight 1.8Kg Warranty 5 Years

...Read more View Kit

Victron Energy Blue Smart IP22 Charger 24V 16A 1 Output – BPC241647022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC241647002 GTIN 8719076052470 Voltage 24V Charge Current 16A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Kit

40A 12V Intelligent automatic multi-stage mains battery charger

This 40A 12V automatic multi-stage mains battery charger is designed to enable safe and efficient unattended charging of a 12V battery or battery bank from a mains power source (220-240V AC). This mains charger boasts an advanced 7 stage charging process which delivers faster and more efficient charging, whilst eliminating the risk of voltage fluctuations. This unit is able to charge either a single 12V battery, or several 12V batteries connected in parallel (batteries must be the same type, capacity and age). This mains battery charger is compatible with Lead Acid batteries, including AGM, Gel and Wet cell batteries. Key features: Safe unattended charging: the unit features inbuilt safety functions (protection against DC short circuit, overheating, overcharging and reverse polarity of the battery), which allow the charger to be left permanently connected to the battery for unattended automatic charging. Unlike many other mains chargers, the charging voltage is also free from peaks which offers smooth uninterrupted charging. Continued charging during battery use: the charger will continue to operate while energy is drawn from the battery during use. The unit will maintain the charge if the battery is already at full capacity. Boost-charging feature: this preliminary charging stage can improve battery condition and recover lost capacity from older batteries. It improves the charge delivered to the batteries, thereby increasing battery life and preventing premature battery failure. Dead battery recovery: the desulphation stage is able to break down sulphation that occurs in batteries which have been left flat for extended periods of time, returning them back to full charge. Automatic temperature control: to maintain an optimal internal temperature, the inbuilt fan is automatically enabled when a high temperature or charging current is detected. LCD Display: shows vital information regarding the charging process (charging voltage / charging current / different charging stages). LED lights also indicate the battery type. Power pack function: can provide a direct supply of power to a 12V load (e.g. 12V fridge) with no battery connected (e.g. during battery replacement). This charger is also supplied with a 1.5m mains AC cable with a UK 3-pin plug, battery cables, and spare fuses. Operating Voltage range (AC): 190V - 265V (full capacity) / 50 Hz DC output current: 40A DC output voltage: 12V Suggested battery capacity: 40 - 300Ah Bulk / absorption charging voltage: 14.2V - 14.8V DC (depending on the battery type) Float charging voltage: 13.2V - 13.8V (depending on the battery type) Efficiency: <88% Operating temperature range: 0°C - 40°C Inbuilt fan Isolated DC output Dimensions: 226 x 175 x 95 mm Weight: 2.4 kg

...Read more View Kit

Victron Energy Blue Smart IP65 Charger 12V 15A 1 Output UK – BPC121531024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC121531024R GTIN 8719076039761 Voltage 12V Charge Current 15A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H60 x W105 x D190mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Kit

Victron Blue Smart IP67 24/12(1) Battery Charger 24V 12A BPC241247026

...Read more View Kit

Victron Energy Orion-Tr 12/24V 15A (360W) Isolated DC-DC Converter – ORI122441110

Remote on-offThe remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual) Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel IP43 protectionWhen installed with the screw terminals oriented downwards Screw terminalsNo special tools are needed for installation. Input fuseOn 12V and 24V input models only. Brand Victron Energy Manufacturer Part Number ORI122441110 gtin 8719076038832 Voltage 12/24V Cont. Output Current 15A Protection Category IP43 Efficiency 88% Bluetooth Enabled No Dimensions H130 x W186 x D80mm Weight 1.8Kg Warranty 5 Years

...Read more View Kit

Waitlist

£305.99

Sterling Power BB1240 Bidirectional Battery-To-Battery Charger - 12V/12V 40A

Empower Your DC to DC charging Experience with the Sterling Power BB1240 Bidirectional Battery-To-Battery Charger The Sterling Power BB1240 Bidirectional Battery-To-Battery Charger is a cutting-edge solution designed to ensure your batteries are always charged and ready to deliver optimal performance. Unmatched Charging Efficiency The Sterling Power BB1240 offers a powerful 40A charge rate, ensuring your batteries are charged quickly and efficiently. Whether you’re dealing with starting batteries or deep-cycle batteries, this charger delivers a consistent and robust charge, maximizing battery life and performance. Its advanced technology ensures that your batteries receive the precise amount of power needed, avoiding overcharging and undercharging issues. Bidirectional Charging Capability One of the standout features of the BB1240 is its bidirectional charging capability. This means it can charge one battery from another, providing ultimate flexibility and redundancy in your power system. If your leisure battery is fully charged, the BB1240 can redirect power to your starter battery, ensuring both batteries are maintained at optimal levels. This feature is particularly valuable in emergency situations, providing peace of mind that you won’t be stranded with a dead battery. Versatile and User-Friendly The BB1240 is designed for versatility and ease of use. It is compatible with a wide range of battery types, including AGM, Gel, Flooded, and Lithium. This compatibility ensures that no matter what type of battery system you have, the BB1240 can integrate seamlessly. The user-friendly interface makes it easy to monitor and control the charging process, giving you complete control over your power management. Enhanced Battery Life Proper charging is crucial to extending the lifespan of your batteries. The BB1240 utilizes advanced charging algorithms that adapt to the specific needs of your batteries, reducing the risk of sulfation and other issues that can shorten battery life. By maintaining your batteries in peak condition, the BB1240 helps you get the most out of your investment, reducing the frequency and cost of battery replacements. Built for Reliability Sterling Power is renowned for its high-quality and reliable power solutions, and the BB1240 is no exception. Built with robust components and designed to withstand the harsh marine environment, this charger is built to last. Its durable construction ensures reliable performance in all conditions, making it an ideal choice for boating enthusiasts who demand the best. Safety First Safety is a paramount concern when dealing with electrical systems, and the BB1240 excels in this regard. It features comprehensive protection mechanisms, including over-temperature protection, over-voltage protection, and short-circuit protection. These safety features ensure that both your batteries and the charger are protected from damage, giving you confidence in your power system’s safety. Compact and Lightweight Design Space is often at a premium and the BB1240’s compact and lightweight design makes it easy to install without taking up valuable space. Its sleek design allows for flexible installation options, ensuring that you can fit it into your existing setup with minimal hassle. The Sterling Power BB1240 Bidirectional Battery-To-Battery Charger is a game-changer for boating & campervan enthusiasts looking to enhance their power management systems. Its unmatched charging efficiency, bidirectional capability, versatility, and reliability make it an indispensable tool for maintaining optimal battery performance. Investing in the BB1240 means investing in peace of mind, knowing that your batteries are in the best hands possible. Don’t let power issues dampen your adventures. Equip your vehicle with the Sterling Power BB1240 and experience the ultimate in battery charging technology. Ensure your time on the water is powered by reliability and efficiency – choose the Sterling Power BB1240 today. Features 4 stage DC-DC battery charging 40A Input - current limiting Bidirectional charging - enables starter battery charging 6 selectable charge profiles for all battery types including lithium 95-98% efficient using buck boost technology Compatible with both smart alternators (Euro 6) and standard alternators 3 charger control modes: Ignition | Vibration | Voltage Sense Automatically recoverable protection for various conditions (see 'Specifications' tab) Multiple units can be wired in parallel to increase output

Waitlist

£429.99

NDS Energy PWS GOLD 12V 40A 3 in 1 Hybrid Charger - DC to DC, MPPT & Battery Charger

NDS Energy PWS GOLD 12V 40A 3 in 1 Hybrid Charger - DC to DC, MPPT & Battery Charger The NDS Power Service Gold unit is a 3-in-1 hybrid charging system, ideal for use in motorhomes and campervans, and boats. It will take care of the leisure battery by charging from the alternator (when the engine is running), from a solar panel (up to 250W) and from 240V mains as well. It can be used with any kind of lead-acid battery - Gel, AGM, flooded acid and LiFePO4 lithium batteries. Charging is done in 5 stages including desulfation (not when set for lithium), ensuring a full recharge, as well as improving the battery's general performance and extending its life. Installation of the Power Service Gold charger is straightforward and detailed instructions are supplied. Technical journalist Peter Rosenthal installed a Power Service Gold charger in his self-built campervan and wrote about the installation in MMM, the UK's leading motorhome magazine. You can read the article by clicking on the link below. Suitable for use with "smart" alternators and lithium batteries. Features 40A DC-DC charger compatible with all alternator types (standard, Euro 5, Euro 6 +) 20A wide input voltage range (90-264V AC) mains charger Solar controller with 250W max. panel capacity 5-stage charging Fast and deep charging of leisure batteries Can be used with all lead-acid (flooded, sealed, AGM, gel etc.) and lithium batteries Selectable (via jumper) multi-stage charging profiles Auxiliary connection for existing systems (CBE, Sargent, Schaudt, Nordelettronica etc.) Engine and leisure batteries are kept separated to prevent accidental discharge Protection against over-temp, short circuit, reverse polarity, over-current, over-voltage, low-temp (lithium only) LED status indicators and audible warning User-replaceable fuses Supplied with 2-pin Euro to IEC power lead Specification Manufacturer's product code: GOLD 40-M MANUFACTURER: NDS Suitable for use with smart alternators?: Yes Input Voltage - Volts: 12 Output voltage - Volts: 12 Recommended minimum output of alternator- Amps: 110 Max. charging current - Amps: 40 Input: Alternator, solar panel and 230v mains Input from alternator - V: 11.8 - 15 Input from solar panel - V: 12 / 28v Conventional alternator cut-in: AUTOMATIC Max. Charging Current from Alternator: 40 Max. charging current from solar panel - Amps: 20 Max. charging current from 230V supply - Amps: 20 Charging characteristic: 5 stage with desulfation Suitable for battery size - Ah: 85 - 400 Suitable for battery types: All types of lead-acid battery inc. wet, AGM, Gel and Lithium LifePo4 Max. power input from solar panel - Watts: 250 Dimensions (L x W x H) - mm: 228 x 135 x 98 Product Net KG: 1.7 Warranty - years: 2 weight: 1.7

Victron Energy Orion-TR SMART 24/24-17A (400W) Non-Isolated DC-DC Charger - ORI242440140

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downward. Screw terminals No special tools needed for installation. Input fuse (not replaceable) Brand Victron Energy Manufacturer Part Number ORI242440140 Input voltage range 20-35V Under voltage shut down 14V Under voltage restart 15V Nominal output voltage 24.2V Output voltage adjust range 20-30V Cont. output current at nominal output voltage and 40°C 17A Short circuit output current 40A Cont. output power at 25°C 480W Cont. output power at 40°C 400W Efficiency 89% DC connection Screw Terminals IP Rating IP43 Dimensions H130 x W186 x D80mm Weight 1.6Kg Warranty 5 Years

...Read more View Kit

Victron Energy Blue Smart IP65s Charger 12V 5A 1 Output UK – BPC120533024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC120533024R GTIN 8719076041214 Voltage 12V Charge Current 5A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H45 x W81 x D182mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Kit

Victron Energy Blue Smart IP22 Charger 24V 12A 1 Output – BPC241242022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC241242002 GTIN 8719076037682 Voltage 24V Charge Current 12A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Kit

Victron Energy Orion-Tr Smart 24/12V 20A (240W) Isolated DC-DC Charger – ORI241224120

Victron Energy Orion-Tr Smart 24/12V 20A (240W) Isolated DC-DC Charger – ORI241224120 The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number ORI241224120 gtin 8719076046080 Voltage 24/12V Cont. Output Current 20A Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 88% Bluetooth Enabled Yes Dimensions H130 x W186 x D70mm Weight 1.3Kg Warranty 5 Years

...Read more View Kit

Victron Energy Centaur Charger 12V 20A 3 Outputs - CCH012020000

The Centaur range of battery chargers features auto-ranging input covering 90-265VAC 50/60Hz input meaning they can be used anywhere in the world.Crucially, and unlike many other products that state universal input, the Centaur range will maintain full output power within the entire specified range. Other features include fully automatic three stage charge characteristic that ensures batteries are fully charged every time and three isolated charge outputs for multi battery configurations to suit the majority of typical installations.FeaturesQuality without compromiseAluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions.Universal 90-265V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation)All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz.The chargers also accept a 90-400 V DC supply.Three outputs that each can supply the full output currentThree isolated outputs to simultaneously charge 3 battery banks Each output is capable to supply the full rated current.Three-stage charging, with temperature compensationThe Centaur charges at bulk rate until the output has reduced to 70% of the rated Amps, at which a 4 hour timer begins. After the timed period the charger switches to float rate. An internal temperature sensor is used to compensate the charge voltage with – 2 mV/ºC (– 1 mV/ºF) per cell. A DIP switch is available to select the optimum charge/float voltages for Flooded Lead-acid, Gel or AGM batteries. GTIN 8719076021476 Voltage 12V Charge Current 20A Input Voltage 90-265V Number of Outputs 3 Bluetooth Enabled No Protection Category IP20 Dimensions H355 x W215 x D110mm Weight 3.8Kg Warranty 5 Years Country of Manufacture Malaysia

...Read more View Kit

Victron Energy Blue Smart IP65 Charger 12V 10A 1 Output UK – BPC121031024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC121031024R GTIN 8719076039754 Voltage 12V Charge Current 10A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H60 x W105 x D190mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Kit

Victron Energy Blue Smart IP67 Charger 12V 17A 1 Output UK – BPC121747026

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC121713006 GTIN 8719076038252 Voltage 12V Charge Current 17A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 95% Bluetooth Enabled Yes Plug Type UK Dimensions H99 x W219 x D65mm Weight 2.4Kg Warranty 5 Years Country of Manufacture India

...Read more View Kit

Victron Energy Blue Smart IP22 Charger 24V 16A 3 Outputs BPC241648022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC241648022 GTIN 8719076052517 Voltage 24V Charge Current 16A Input Voltage 230V Number of Outputs 3 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Kit

Victron Energy Blue Smart IP22 Charger 24V 16A 3 Outputs UK – BPC241648022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC240842002 GTIN 8719076037491 Voltage 24V Charge Current 8A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Kit

Sterling 6 amp 6V and 12V Battery Charger

Portable micro processor controlled chargers 230V AC 50 Hz only Fully automatic microprocessor controlled Can be set at 2, 4 , 6 amps for 6V and 12V Batteries 2 Amp slow charge - for charging and maintaining small batteries 4 Amp medium charge - self-adjusting charge rate idea for everyday charging needs and keeping your battery in peak condition 6 Amp fast charge - charge monitor battery condition and adjusts charge rate downward to prevent battery damage Overheat protection, short circuit protection, reverse polarity protection, input low voltage and over voltage protection Suitable for use with lead-acid and AGM batteries Automatically switches to float charger and maintenance when battery is fully charged Battery rejuvenation pulse function inc. De-Sulphation protection LED Display Voltage DC Amps AC Plug Size L x W x D mm Weight Kg 6 & 12 6 British 180 x 100 x 55 0.72

...Read more View Kit

Combined Solar & Split Charge kit (Victron 185w Panel & Sterling BBS1230)

Combined Solar & Split Charge kit (Victron 185w Panel & Sterling BBS1230) The new combined battery-to-battery charger and solar regulator from Sterling Power maximizes the operational usage of the battery-to-battery charger. It does this by adding a solar operation to the product both when the vehicle is in motion and moreover when the vehicle is stationary. This makes it, in effect, also a free 350W solar regulator when the vehicle is stationary. This product has all the benefits of the standard 30A Battery to Battery charger when the engine is on. This kit comprises of the following: Sterling BBS1230 combined B2B Split charger / Solar MMPTVictron 185w Monocrystalline Solar PanelSolar Panel Z Bracket Mount (Call if you require other mount types)6mm (5m) Solar Extension Cables with MC4 connectorsDouble Entry Roof GlandResettable Circuit Breaker16mm Battery Cable ( 1 to 10m ) Red & Black2 x Victron Mega Fuse Holders2 x 60amp Mega FusesCable Terminal Lugs Features 1) Multiple Activation Modes: Automatic for most non-vehicle applications, Manual for remote activation. Regenerative braking (requiring ignition feed), Automatic regenerative braking, requiring no ignition feed. 2) Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mode allows you to override this. 3) Safety features: 100% fire proof plastic box. No screws to corrode. Thermal power reduction. Multi-stage fan cooling 4) Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down. 5) Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages. 6) B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V). 7) Customizable Profile: Choose your own charging profile on the front panel. 8) 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid. 9) 4-stage battery charging: The B2B charges batteries between 5-20 times faster than a stand-alone alternator. 10) Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking). Remote control is optional. Brand Sterling Power Manufacturer Part Number BBS1230 DC V (in) 12V DC V (out) 12V Current (A) 30A input, 350W solar Dimensions L190 x W160 x D50mm Weight (kg) 1.5Kg Warranty 2 Years

...Read more View Kit

Sterling BBS1230 'Pro Batt Ultra' Battery-To-Battery Charger +MPPT Solar Controller

Sterling BBS1230 'Pro Batt Ultra' Battery-To-Battery Charger 12V/12V 30A with combined 350w MPPT Solar Controller The new combined battery-to-battery charger and solar regulator maximizes the operational usage of the battery-to-battery charger. It does this by adding a solar operation to the product both when the vehicle is in motion and moreover when the vehicle is stationary. This makes it, in effect, also a free 350W solar regulator when the vehicle is stationary. This product has all the benefits of the standard 30A Battery to Battery charger when the engine is on. Features 1) Multiple Activation Modes: Automatic for most non-vehicle applications, Manual for remote activation. Regenerative braking (requiring ignition feed), Automatic regenerative braking, requiring no ignition feed. 2) Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mode allows you to override this. 3) Safety features: 100% fire proof plastic box. No screws to corrode. Thermal power reduction. Multi-stage fan cooling 4) Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down. 5) Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages. 6) B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V). 7) Customizable Profile: Choose your own charging profile on the front panel. 8) 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid. 9) 4-stage battery charging: The B2B charges batteries between 5-20 times faster than a stand-alone alternator. 10) Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking). Remote control is optional. Brand Sterling Power Manufacturer Part Number BBS1230 DC V (in) 12V DC V (out) 12V Current (A) 30A input, 350W solar Dimensions L190 x W160 x D50mm Weight (kg) 1.5Kg Warranty 2 Years

...Read more View Kit

Victron Energy Blue Smart IP65 Charger 12V 25A 1 Output UK – BPC122531024

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC122531024 GTIN 8719076051565 Voltage 12V Charge Current 25A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H75 x W140 x D240mm Weight 1.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Kit

Victron Energy Blue Smart IP65 Charger 24V 8A 1 Output UK – BPC240831024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC240831024R GTIN 8719076040699 Voltage 24V Charge Current 8A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 95% Bluetooth Enabled Yes Plug Type UK Dimensions H60 x W105 x D190mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Kit

Sterling Power 48V 15A Digital Battery Charger - PCU4815

Sterling Power PCU4815 With years of experience in this market everything Sterling Power could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take their word for it. This was confirmed on its first competative test with Sailing Today Magazine where it won premium product against the toughest competitiors (Mastervolt and victron plus others). It was described as "this has to be the most flexible marine charger on the market today". Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently relseased onto the market. Benefits - Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity. - Battery Temperature compensation sensor included. - Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses. - Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish. - 11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel. - Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability Technical Specification DC V 48 V Rating (A) 15 A Length 315 mm Width 215 mm Height 90 mm Weight 3 kg Warranty 5 Years

...Read more View Kit

Waitlist

£135.50

Victron Energy Blue Smart IP67 Charger 24V 8A 1 Output – BPC240813006

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC240813006 GTIN 8719076038276 Voltage 24V Charge Current 8A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 96% Bluetooth Enabled Yes Plug Type CEE 7/7 Dimensions H99 x W219 x D65mm Weight 2.4Kg Warranty 5 Years Country of Manufacture India

Victron Energy Blue Smart IP67 Charger 12V 25A 1 Output UK – BPC122547026

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC122514006 GTIN 8719076041313 Voltage 12V Charge Current 25A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 95% Bluetooth Enabled Yes Plug Type UK Dimensions H99 x W219 x D65mm Weight 2.4Kg Warranty 5 Years

...Read more View Kit

Sterling Power Pro Charge Ultra Battery Charger 24V 30A (3 out) – PCU2430

With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market. Features Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity. Battery Temperature compensation sensor included. Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated. Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections. Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability. Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V). Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses. Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish 11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel. Brand Sterling Power Manufacturer Part Number PCU2430 Voltage 24 Charger Amps Dimensions L315 x W215 x D90mm Weight (kg) 3 Warranty 5 Years

...Read more View Kit

Sterling Power Pro Charge ULTRA Charger 12V 60A (3 out) PCU1260

With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market. Features Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity. Battery Temperature compensation sensor included. Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated. Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections. Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability. Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V). Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses. Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish 11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel. Brand Sterling Power Manufacturer Part Number PCU1260 Voltage 12 Charger Amps Dimensions L315 x W215 x D90mm Weight (kg) 3 Warranty 5 Years

...Read more View Kit

Sterling Power Pro Charge ULTRA Battery Charger 12V 20A (3 out) PCU1220

With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market. Features Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity. Battery Temperature compensation sensor included. Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated. Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections. Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability. Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V). Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses. Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish 11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel. Brand Sterling Power Manufacturer Part Number PCU1220 Voltage 12 Charger Amps Dimensions L260 x W215 x D90mm Weight (kg) 2 Warranty 5 Years

...Read more View Kit

Sterling Power Pro Charge ULTRA Battery Charger 12V 10A (2 out) PCU1210

With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market. Features Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity. Battery Temperature compensation sensor included. Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated. Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections. Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability. Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V). Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses. Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish 11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel. Brand Sterling Power Manufacturer Part Number PCU1210 Voltage 12 Charger Amps Dimensions L260 x W215 x D90mm Weight (kg) 2 Warranty 2 Years

...Read more View Kit

AMT12-2 Trickle Charger

AMT12-2 Trickle Charger charges Vehicle Battery from Leisure Battery with Solar Charger /Mains Hookup or only a Secondary Battery Part Number: AMT12-2 The AMT12-2 has many names Trickle Charger, Battery Maintainer, Battery Saver, Reverse Charger, Top Up Charger, Battery Equaliser, Battery to Battery trickle charger and its purpose is to keep a Source / Vehicle Battery charged & protected from damage during prolonged periods of Vehicle, Boat & Motorhome inactivity or storage. The charger feeds a low current into the Source Battery to compensate for self discharge, alarm & tracker loads while ensuring the charge of the Auxiliary / Leisure Battery is maintained. In the ideal scenario a Solar Charger or Mains Charger is attached to an Auxiliary / Leisure Battery to protect it from damage during a period of inactivity . The Trickle Charger draws a small current off to maintain the Vehicle / Source Battery. The Trickle Charger also feeds charge from the Auxiliary Battery to the Vehicle Battery until they reach 11.5V and 11.7V respectively ensuring that both Batteries are kept as healthy as possible even if no Solar Charger or Main Charger is present. For Lithium batteries the voltage thresholds for this function are set at 1V so 11.5V and 12.5V are the minimum operating voltages . The unit has 8 User selected programmes and so is suitable for use with any Auxiliary Battery Charging System including a simple Voltage Sensing Relay and a Battery to Battery Charger. A ABB-007 bluetooth module allows the unit to be configured to specific user settings to cater for different battery types and specific user requirements . All that is required is to download the app from the Apple store or google play and make the desired settings changes It does not matter the Make or Type of Charger the AMT12-2 will Charge the Vehicle Battery from the Leisure Battery . The clever software means it is compatible with conventional Alternator Vehicles, the latest Stop / Start & Euro 5/6 & Regenerative Braking Technologies. The unit has a low current draw of less than 2mA on a 12V system & so presents a very small discharge load to the Vehicle & Leisure Battery. At 1Ahr drain every 20 days the unit has negligible effect on the Battery Capacity and should easily cover the winter storage period. When a charging source either a Mains Charger or a Solar Charger is connected to the Auxiliary / Leisure Battery the AMT12-2 Trickle Charger allows a maximum of 4A (Usually considerably less) to flow from the Leisure Battery to the Vehicle Battery thus ensuring the Leisure Battery is Charged first and the Vehicle Battery second. The AMT12-2 works with all types of Lead Acid Batteries & Lithium Batteries, The Status Led gives feedback on the Trickle Charger Operation , State of Charge of the Vehicle Battery and Auxiliary Battery Conditions. There is Ignition Override Switch Enable to allow the user to externally control the charging if for some reason they wish to override the automatic settings. The AMT12-2 Trickle Charger works on 12V & 24V Battery Systems, Automatically detecting whether it is connected to a 24V or 12V system. The compact potted plastic enclosure mean it is easily fitted next to the Auxiliary Battery Charger and connected by 3 Faston connections. The Inbuilt Fuse Protection means the Installation is extremely quick and easy.

...Read more View Kit

Victron Energy Skylla-i 24/80(1+1) 230V – SKI024080000

The Skylla-i 24/80 is a modern and powerful battery charger that withstands the rigors of an adverse environment: heat, humidity and salt air. Features of the Skylla-i 24/80 Synchronised parallel operationSeveral chargers can be synchronised with the CAN bus interface. This is achieved by simply interconnecting the chargers with RJ45 UTP-cables. Note: Two output and three output chargers cannot be paralleled with each other. The right amount of charge for a lead-acid battery: variable absorption timeWhen only shallow discharges occur the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. Preventing damage due to excessive gassing: the BatterySafe modeIf, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Skylla-i will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached. Less maintenance and aging when the battery is not in use: the Storage modeThe storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (26,4V for 24V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘refresh’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. To increase battery life: temperature compensationEvery Skylla-i comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations of battery temperature are expected. Battery voltage senseIn order to compensate for voltage loss due to cable resistance, the Skylla-i is provided with a voltage sense facility so that the battery always receives the correct charge voltage. Suitable for AC and DC supply (AC-DC and DC-DC operation)The chargers also accept a DC supply. Use as a power supplyAs a result of the perfectly stabilized output voltage, the Skylla-i 24/80 can be used as a power supply if batteries or large buffer capacitors are not available. Li-Ion (LiFePO4) readySimple charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-Ion BMS to the remote control port of the charger. Alternatively complete control of voltage and current can be achieved by connecting to the galvanically isolated CAN bus port. Learn more about batteries and battery charging To learn more about batteries and charging batteries (including the pro’s and cons of multi-bank charging and intelligent charging), please refer to Electricity on Board. The Skylla-i Control panel provides remote control and monitoring of the charge process with LED status indication. In addition, the remote panel also offers input current adjustment that can be used to limit the input current and thus the power drawn from the AC supply. This is particularly useful when operating the charger from limited shore power or small gensets. The panel can also be used to change several battery charging parameters. Several control panels can be connected to one charger or to a set of synchronised and parallel connected chargers. Want to improve battery charging? Why not take a look at the Victron Energy Battery Sense which measures voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided – guaranteeing the correct charge-voltage. Brand Victron Energy Manufacturer Part Number SKI024080000 gtin 8719076026228 Voltage 24V Charge Current 80A Input Voltage 230V Number of Outputs 1+1 Protection Category IP21 Bluetooth Enabled No Dimensions H405 x W250 x D150mm Warranty 5 Years Country of Manufacture Malaysia

...Read more View Kit

Waitlist

£352.99

Sterling 40A Bidirectional Battery-To-Battery Charger - FULL KIT

Full Kit - Sterling 40A Bidirectional Battery-To-Battery Charger - FULL KIT Kit consists of: 30A DC to DC charger10mm cable (select length of cable required - Starter Battery to Leisure Battery)2 x Midi Fuse Holders2 x 60amp Midi Fuses Empower Your DC to DC charging Experience with the Sterling Power BB1240 Bidirectional Battery-To-Battery Charger The Sterling Power BB1240 Bidirectional Battery-To-Battery Charger is a cutting-edge solution designed to ensure your batteries are always charged and ready to deliver optimal performance. Unmatched Charging Efficiency The Sterling Power BB1240 offers a powerful 40A charge rate, ensuring your batteries are charged quickly and efficiently. Whether you’re dealing with starting batteries or deep-cycle batteries, this charger delivers a consistent and robust charge, maximizing battery life and performance. Its advanced technology ensures that your batteries receive the precise amount of power needed, avoiding overcharging and undercharging issues. Bidirectional Charging Capability One of the standout features of the BB1240 is its bidirectional charging capability. This means it can charge one battery from another, providing ultimate flexibility and redundancy in your power system. If your leisure battery is fully charged, the BB1240 can redirect power to your starter battery, ensuring both batteries are maintained at optimal levels. This feature is particularly valuable in emergency situations, providing peace of mind that you won’t be stranded with a dead battery. Versatile and User-Friendly The BB1240 is designed for versatility and ease of use. It is compatible with a wide range of battery types, including AGM, Gel, Flooded, and Lithium. This compatibility ensures that no matter what type of battery system you have, the BB1240 can integrate seamlessly. The user-friendly interface makes it easy to monitor and control the charging process, giving you complete control over your power management. Enhanced Battery Life Proper charging is crucial to extending the lifespan of your batteries. The BB1240 utilizes advanced charging algorithms that adapt to the specific needs of your batteries, reducing the risk of sulfation and other issues that can shorten battery life. By maintaining your batteries in peak condition, the BB1240 helps you get the most out of your investment, reducing the frequency and cost of battery replacements. Built for Reliability Sterling Power is renowned for its high-quality and reliable power solutions, and the BB1240 is no exception. Built with robust components and designed to withstand the harsh marine environment, this charger is built to last. Its durable construction ensures reliable performance in all conditions, making it an ideal choice for boating enthusiasts who demand the best. Safety First Safety is a paramount concern when dealing with electrical systems, and the BB1240 excels in this regard. It features comprehensive protection mechanisms, including over-temperature protection, over-voltage protection, and short-circuit protection. These safety features ensure that both your batteries and the charger are protected from damage, giving you confidence in your power system’s safety. Compact and Lightweight Design Space is often at a premium and the BB1240’s compact and lightweight design makes it easy to install without taking up valuable space. Its sleek design allows for flexible installation options, ensuring that you can fit it into your existing setup with minimal hassle. The Sterling Power BB1240 Bidirectional Battery-To-Battery Charger is a game-changer for boating & campervan enthusiasts looking to enhance their power management systems. Its unmatched charging efficiency, bidirectional capability, versatility, and reliability make it an indispensable tool for maintaining optimal battery performance. Investing in the BB1240 means investing in peace of mind, knowing that your batteries are in the best hands possible. Don’t let power issues dampen your adventures. Equip your vehicle with the Sterling Power BB1240 and experience the ultimate in battery charging technology. Ensure your time on the water is powered by reliability and efficiency – choose the Sterling Power BB1240 today. Features 4 stage DC-DC battery charging 40A Input - current limiting Bidirectional charging - enables starter battery charging 6 selectable charge profiles for all battery types including lithium 95-98% efficient using buck boost technology Compatible with both smart alternators (Euro 6) and standard alternators 3 charger control modes: Ignition | Vibration | Voltage Sense Automatically recoverable protection for various conditions (see 'Specifications' tab) Multiple units can be wired in parallel to increase output

Combined Solar & Split Charge kit (Pro 270w Flex Panel & Sterling BBS1230)

Combined Solar & Split Charge kit (Pro 270w Flexible Panel & Sterling BBS1230) The new combined battery-to-battery charger and solar regulator from Sterling Power maximizes the operational usage of the battery-to-battery charger. It does this by adding a solar operation to the product both when the vehicle is in motion and moreover when the vehicle is stationary. This makes it, in effect, also a free 350W solar regulator when the vehicle is stationary. This product has all the benefits of the standard 30A Battery to Battery charger when the engine is on. This kit comprises of the following: Sterling BBS1230 combined B2B Split charger / Solar MMPT1 x 270w Pro Semi-Flexible Monocrystalline Solar Panel - 5 year warranty6mm (5m) Solar Extension Cables with MC4 connectorsDouble Entry Roof GlandResettable Circuit Breaker16mm Battery Cable ( 1 to 10m ) Red & Black2 x Victron Mega Fuse Holders2 x 60amp Mega FusesCable Terminal LugsSikaflex 522 Features 1) Multiple Activation Modes: Automatic for most non-vehicle applications, Manual for remote activation. Regenerative braking (requiring ignition feed), Automatic regenerative braking, requiring no ignition feed. 2) Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mode allows you to override this. 3) Safety features: 100% fire proof plastic box. No screws to corrode. Thermal power reduction. Multi-stage fan cooling 4) Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down. 5) Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages. 6) B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V). 7) Customizable Profile: Choose your own charging profile on the front panel. 8) 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid. 9) 4-stage battery charging: The B2B charges batteries between 5-20 times faster than a stand-alone alternator. 10) Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking). Remote control is optional. Brand Sterling Power Manufacturer Part Number BBS1230 DC V (in) 12V DC V (out) 12V Current (A) 30A input, 350W solar Dimensions L190 x W160 x D50mm Weight (kg) 1.5Kg Warranty 2 Years

...Read more View Kit

Combined Solar & Split Charge kit (Victron 370w Panels & Sterling BBS1230)

Combined Solar & Split Charge kit (Victron 370w Panels & Sterling BBS1230) The new combined battery-to-battery charger and solar regulator from Sterling Power maximizes the operational usage of the battery-to-battery charger. It does this by adding a solar operation to the product both when the vehicle is in motion and moreover when the vehicle is stationary. This makes it, in effect, also a free 350W solar regulator when the vehicle is stationary. This product has all the benefits of the standard 30A Battery to Battery charger when the engine is on. This kit comprises of the following: Sterling BBS1230 combined B2B Split charger / Solar MMPT2 x Victron 185w Monocrystalline Solar Panel Solar Panel Z Bracket Mount (Call if you require other mount types)6mm (5m) Solar Extension Cables with MC4 connectorsDouble Entry Roof GlandResettable Circuit Breaker16mm Battery Cable ( 1 to 10m ) Red & Black2 x Victron Mega Fuse Holders2 x 60amp Mega FusesCable Terminal Lugs Features 1) Multiple Activation Modes: Automatic for most non-vehicle applications, Manual for remote activation. Regenerative braking (requiring ignition feed), Automatic regenerative braking, requiring no ignition feed. 2) Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mode allows you to override this. 3) Safety features: 100% fire proof plastic box. No screws to corrode. Thermal power reduction. Multi-stage fan cooling 4) Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down. 5) Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages. 6) B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V). 7) Customizable Profile: Choose your own charging profile on the front panel. 8) 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid. 9) 4-stage battery charging: The B2B charges batteries between 5-20 times faster than a stand-alone alternator. 10) Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking). Remote control is optional. Brand Sterling Power Manufacturer Part Number BBS1230 DC V (in) 12V DC V (out) 12V Current (A) 30A input, 350W solar Dimensions L190 x W160 x D50mm Weight (kg) 1.5Kg Warranty 2 Years

...Read more View Kit

Waitlist

£399.99

NDS Energy PWS GOLD 12V 30A 3 in 1 Hybrid Charger - DC to DC, MPPT & Battery Charger

NDS Energy PWS GOLD 12V 30A 3 in 1 Hybrid Charger - DC to DC, MPPT & Battery Charger The NDS Power Service Gold unit is a 3-in-1 hybrid charging system, ideal for use in motorhomes and campervans, and boats. It will take care of the leisure battery by charging from the alternator (when the engine is running), from a solar panel (up to 250W) and from 240V mains as well. It can be used with any kind of lead-acid battery - Gel, AGM, flooded acid and LiFePO4 lithium batteries. Charging is done in 5 stages including desulfation (not when set for lithium), ensuring a full recharge, as well as improving the battery's general performance and extending its life. Installation of the Power Service Gold charger is straightforward and detailed instructions are supplied. Technical journalist Peter Rosenthal installed a Power Service Gold charger in his self-built campervan and wrote about the installation in MMM, the UK's leading motorhome magazine. You can read the article by clicking on the link below. Suitable for use with "smart" alternators and lithium batteries. Features 30A DC-DC charger compatible with all alternator types (standard, Euro 5, Euro 6 +) 20A wide input voltage range (90-264V AC) mains charger PWM solar controller with 250W max. panel capacity 5-stage charging Fast and deep charging of leisure batteries Can be used with all lead-acid (flooded, sealed, AGM, gel etc.) and lithium batteries Selectable (via jumper) multi-stage charging profiles Auxiliary connection for existing systems (CBE, Sargent, Schaudt, Nordelettronica etc.) Engine and leisure batteries are kept separated to prevent accidental discharge Protection against over-temp, short circuit, reverse polarity, over-current, over-voltage, low-temp (lithium only) LED status indicators and audible warning User-replaceable fuses Supplied with 2-pin Euro to IEC power lead Specification Nominal input voltage Alternator: 12V DC Solar panel: 12V DC Mains: 230V AC / 50Hz Input voltage range Alternator: 11-15V DC Solar panel: 12-28V DC Mains: 90-264V AC / 47-63Hz Maximum input current Alternator: 34A Solar panel: 15A Mains: 3.5A Input sources recommend power Alternator: ≥90A Solar panel: ≤250W Mains: ≥450W Nominal output voltage: 12V DC Output voltage range: 11-16V DC Maximum charging current Alternator: 30A Solar panel: 15A Mains: 20A Galvanic insulation: From DC - No / From AC - Yes Maximum efficiency: 92% Cooling: Fan-assisted Charging type: 5-stage Battery types: All lead-acid (wet, sealed, AGM, Gel) and lithium Recommended battery capacity: ≥90Ah Euro6 & 'Smart' alternator compatible: Yes Cable connections: 7-way screw terminal block (16mm² max., recommended 10mm² min.) Mains power cable: 2-pin Euro plug Status indicators: 2 x LED + buzzer Protection: Short-circuit, reverse-polarity, over-temp, over-current, over-voltage, under-temp (lithium only) Self-consumption: 13mA Operating temperature range: -20 to +50°C Overall dims: 228 (L) x 135 (W) x 95 (H) mm

Victron Energy Blue Smart IP65s Charger 12V 4A 1 Output UK – BPC120433024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC120433024R GTIN 8719076044604 Voltage 12V Charge Current 4A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H45 x W81 x D182mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Kit

Victron Energy Blue Smart IP65 Charger 24V 13A 1 Output UK – BPC241331024

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC241331024 GTIN 8719076051589 Voltage 24V Charge Current 13A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 95% Bluetooth Enabled Yes Plug Type UK Dimensions H75 x W140 x D240mm Weight 1.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Kit

Victron Energy Blue Smart IP65 Charger 12V 7A 1 Output UK – BPC120731024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC120731024R GTIN 8719076039747 Voltage 12V Charge Current 7A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H47 x W95 x D190mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Kit

Sterling Power Pro Charge Ultra Battery Charger 36V 20A (3 out) – PCU3620

With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market. Features Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity. Battery Temperature compensation sensor included. Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated. Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections. Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability. Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V). Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses. Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish 11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel. Brand Sterling Power Manufacturer Part Number PCU3620 Voltage 36 Charger Amps Dimensions L315 x W215 x D90mm Weight (kg) 3 Warranty 2 Years

...Read more View Kit

Sterling Power Pro Charge Ultra Battery Charger 24V 20A (3 out) – PCU2420

With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market. Features Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity. Battery Temperature compensation sensor included. Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated. Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections. Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability. Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V). Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses. Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish 11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel. Brand Sterling Power Manufacturer Part Number PCU2420 Voltage 24 Charger Amps Dimensions L260 x W215 x D90mm Weight (kg) 2 Warranty 5 Years

...Read more View Kit

Cyrix-ct 12/24V-230A Intelligent Battery Combiner

The Cyrix Battery Combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged). Cyrix Battery Combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased. Specifications: Continuous current: 230A Cranking current (5 secs): 500A Standby consumption: <4mA Rated voltage: 12V / 24V Terminal size: 8mm Dimensions: 65 x 100 x 50 mm Weight: 270g Cyrix-ct Datasheet Cyrix-ct 12/24V-230A Intelligent Battery Combiner Datasheet Cyrix Wiring Diagram

...Read more View Kit

Sterling 1 amp 12V Battery charger

Sterling 1A 12V Battery charger: Fully automatic microprocessor controlled LED display for 6V and 12V batteries 3-stage charging profile: bulk-absorption-float User-friendly screen: LED indicates charging status, full, fault Fault diagnostic system Overheat protection, short-circuit protection, reverse polarity protection Low input voltage and over voltage protection Voltage DC Amps AC Plug L x W x D mm Weight Kg 12 1 British 135 x 50 x 40 0.35

...Read more View Kit

Waitlist

£368.00

Sterling Power Battery to Battery Charger, Waterproof 12/12V 60A – BBW1260

Waterproof ( built to ) IP66. These units have the benefit of being epoxy potted so that the charger is sealed off from water and dirt ingress. The cooling fan is not sealed and is rated at IP55, the fan is designed to be easily replaced in the event of major immersion.

Sterling Power Pro Charge ULTRA Battery Charger 12V 50A (3 out) PCU1250

With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market. Features Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity. Battery Temperature compensation sensor included. Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated. Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections. Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability. Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V). Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses. Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish 11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel. Brand Sterling Power Manufacturer Part Number PCU1250 Voltage 12 Charger Amps Dimensions L315 x W215 x D90mm Weight (kg) 3 Warranty 5 Years

...Read more View Kit

Sterling Power Pro Charge ULTRA Battery Charger 12V 40A (3 out) PCU1240

With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market. Features Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity. Battery Temperature compensation sensor included. Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated. Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections. Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability. Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V). Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses. Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish 11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel. Brand Sterling Power Manufacturer Part Number PCU1240 Voltage 12 Charger Amps Dimensions L260 x W215 x D90mm Weight (kg) 2 Warranty 5 Years

...Read more View Kit

Sterling Power Pro Charge ULTRA Battery Charger 12V 30A (3 out) PCU1230

With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market. Features Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity. Battery Temperature compensation sensor included. Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated. Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections. Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability. Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V). Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses. Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish 11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel. Brand Sterling Power Manufacturer Part Number PCU1230 Voltage 12 Charger Amps Dimensions L260 x W215 x D90mm Weight (kg) 2 Warranty 5 Years

...Read more View Kit

0 Kits Selected✕

Fuel Your Caravan Adventures With Caravan Leisure Battery Chargers

A reliable battery charger is indispensable for caravanning. Imagine returning to your caravan after a day of exploring to find a fully charged leisure battery, ready to power your lights, fridge, and other amenities. Our range of caravan battery chargers ensures you're always prepared for whatever adventure comes your way.

Extend your caravanning season and enjoy maximum comfort with a top-quality battery charger.

Quality Battery Chargers For Leisure Battery

If you have a campervan, motorhome, caravan or boat that has deep-cycle leisure batteries installed then you will want to be able to re-charge it from mains power when available (e.g. site hook-up, shore-power or at home). Leisure batteries differ in construction from vehicle starter batteries and consequently require different charging regimes.

Fixed voltage battery chargers won't achieve full re-charging of a leisure battery because the lead plates are thicker, so charging has to take place in controlled stages with the voltage level being automatically adjusted throughout to ensure full charge absorption. This is where dedicated multi-stage or 'intelligent' charger needs to be used to ensure your battery receives a full, deep charge and its serviceable lifetime is maximised.

Recommended Full Kits

£1,567.57

0W Inv

370W Solar

230Ah Batt

30Amp DC

No Inverter - 370w OR30 230ah

Power

Battery

Solar

Off-Grid

View Product

£1,665.33

0W Inv

260W Solar

230Ah Batt

30Amp DC

No Inverter - 260w OR30 230ah

Power

Battery

Solar

Off-Grid

View Product

£3,069.11

2000W Inv

370W Solar

230Ah Batt

50Amp DC

2000 MP - 370w OR50 230ah(G2)

Power

Battery

Solar

Off-Grid

View Product

£2,681.12

2000W Inv

0W Solar

300Ah Batt

50Amp DC

2000 MP - OR50 300ah (G2)

Power

Battery

Solar

Off-Grid

View Product

£2,978.30

1600W Inv

350W Solar

460Ah Batt

50Amp DC

1600 MP - 350w OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£2,695.11

2000W Inv

0W Solar

460Ah Batt

50Amp DC

2000 MP - OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£3,145.10

2000W Inv

450W Solar

460Ah Batt

50Amp DC

2000 MP - 450w OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£2,798.31

1600W Inv

450W Solar

460Ah Batt

50Amp DC

1600 MP - 450w OR50 460ah

Power

Battery

Solar

Off-Grid

View Product

£2,681.12

2000W Inv

0W Solar

300Ah Batt

50Amp DC

2000 MP - OR50 300ah (G2)

Power

Battery

Solar

Off-Grid

View Product

£3,411.10

2000W Inv

350W Solar

460Ah Batt

50Amp DC

2000 MP - 350w OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£2,978.30

1600W Inv

350W Solar

460Ah Batt

50Amp DC

1600 MP - 350w OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£3,193.10

2000W Inv

370W Solar

460Ah Batt

50Amp DC

2000 MP - 370w OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£3,349.58

3000W Inv

260W Solar

300Ah Batt

50Amp DC

3000 MP - 260w OR50 300ah (G2)

Power

Battery

Solar

Off-Grid

View Product

£3,408.58

3000W Inv

370W Solar

300Ah Batt

50Amp DC

3000 MP - 370w OR50 300ah (G2)

Power

Battery

Solar

Off-Grid

View Product

£3,559.58

3000W Inv

390W Solar

460Ah Batt

50Amp DC

3000 MP - 390w OR50 460ah

Power

Battery

Solar

Off-Grid

View Product

£3,508.58

3000W Inv

370W Solar

460Ah Batt

50Amp DC

3000 MP - 370w OR50 460ah

Power

Battery

Solar

Off-Grid

View Product

£2,978.30

1600W Inv

350W Solar

460Ah Batt

50Amp DC

1600 MP - 350w OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£2,695.11

2000W Inv

0W Solar

460Ah Batt

50Amp DC

2000 MP - OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£3,145.10

2000W Inv

450W Solar

460Ah Batt

50Amp DC

2000 MP - 450w OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£2,798.31

1600W Inv

450W Solar

460Ah Batt

50Amp DC

1600 MP - 450w OR50 460ah

Power

Battery

Solar

Off-Grid

View Product

£2,789.88

1200W Inv

450W Solar

460Ah Batt

50Amp DC

1200 MP - 450w OR50 460ah shunt (G2)

Power

Battery

Solar

Off-Grid

View Product

£2,139.89

1200W Inv

0W Solar

460Ah Batt

50Amp DC

1200 MP - OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£2,589.88

1200W Inv

450W Solar

460Ah Batt

50Amp DC

1200 MP - 450w OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£2,521.14

0W Inv

0W Solar

12Ah Batt

50Amp DC

No Inverter - 350w flex OR50 460ah shunt IP22

Power

Battery

Solar

Off-Grid

View Product

£3,924.57

3000W Inv

900W Solar

460Ah Batt

50Amp DC

3000 MP - 900w OR50 460ah shunt (G2)

Power

Battery

Solar

Off-Grid

View Product

£3,593.57

3000W Inv

900W Solar

628Ah Batt

3000 MP - 900w 628ah shunt

Power

Battery

Solar

Off-Grid

View Product

£3,724.57

3000W Inv

900W Solar

460Ah Batt

50Amp DC

3000 MP - 900w OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£3,937.56

3000W Inv

900W Solar

628Ah Batt

50Amp DC

3000 MP - 900w OR50 628ah shunt

Power

Battery

Solar

Off-Grid

View Product

£1,567.57

0W Inv

370W Solar

230Ah Batt

30Amp DC

No Inverter - 370w OR30 230ah

Power

Battery

Solar

Off-Grid

View Product

£1,665.33

0W Inv

260W Solar

230Ah Batt

30Amp DC

No Inverter - 260w OR30 230ah

Power

Battery

Solar

Off-Grid

View Product

£3,069.11

2000W Inv

370W Solar

230Ah Batt

50Amp DC

2000 MP - 370w OR50 230ah(G2)

Power

Battery

Solar

Off-Grid

View Product

£2,681.12

2000W Inv

0W Solar

300Ah Batt

50Amp DC

2000 MP - OR50 300ah (G2)

Power

Battery

Solar

Off-Grid

View Product

£3,577.58

3000W Inv

555W Solar

300Ah Batt

50Amp DC

3000 MP - 555w OR50 300ah (G2)

Power

Battery

Solar

Off-Grid

View Product

£3,408.58

3000W Inv

370W Solar

300Ah Batt

50Amp DC

3000 MP - 370w OR50 300ah (G2)

Power

Battery

Solar

Off-Grid

View Product

£3,833.57

3000W Inv

350W Solar

460Ah Batt

50Amp DC

3000 MP - 350w flex OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£3,465.57

3000W Inv

370W Solar

460Ah Batt

50Amp DC

3000 MP - 370w OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£1,287.58

0W Inv

0W Solar

160Ah Batt

30Amp DC

No Inverter - 185w OR30 160ah

Power

Battery

Solar

Off-Grid

View Product

£1,019.18

0W Inv

0W Solar

160Ah Batt

No Inverter - 160ah IP22

Power

Battery

Solar

Off-Grid

View Product

£1,543.99

500W Inv

185W Solar

160Ah Batt

30Amp DC

500 PHX - 185w OR30 160ah

Power

Battery

Solar

Off-Grid

View Product

£1,764.98

500W Inv

260W Solar

230Ah Batt

30Amp DC

500 PHX - 260w OR30 230ah

Power

Battery

Solar

Off-Grid

View Product

£2,408.61

12W Inv

0W Solar

12Ah Batt

500 MP - 350w flex 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£2,036.61

12W Inv

0W Solar

12Ah Batt

50Amp DC

500 MP - OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£2,589.88

1200W Inv

450W Solar

460Ah Batt

50Amp DC

1200 MP - 450w OR50 460ah shunt

Power

Battery

Solar

Off-Grid

View Product

£2,371.14

0W Inv

350W Solar

460Ah Batt

50Amp DC

No Inverter - 350w OR50 460ah shunt IP22

Power

Battery

Solar

Off-Grid

View Product

£1,287.58

0W Inv

0W Solar

160Ah Batt

30Amp DC

No Inverter - 185w OR30 160ah

Power

Battery

Solar

Off-Grid

View Product

£1,019.18

0W Inv

0W Solar

160Ah Batt

No Inverter - 160ah IP22

Power

Battery

Solar

Off-Grid

View Product

£1,543.99

500W Inv

185W Solar

160Ah Batt

30Amp DC

500 PHX - 185w OR30 160ah

Power

Battery

Solar

Off-Grid

View Product

£1,764.98

500W Inv

260W Solar

230Ah Batt

30Amp DC

500 PHX - 260w OR30 230ah

Power

Battery

Solar

Off-Grid

View Product

Build Your Own Give Us A Call

Multiselect

FAQs

Learn more about our business & products below

If you regularly use your caravan, motorhome, or campervan, a leisure battery charger is essential to maintain battery health and ensure it's always ready for use.

Charging time depends on the battery's capacity and the charger's output. Generally, it can take several hours to fully charge a leisure battery.

Yes, overcharging can damage a leisure battery. Our chargers have built-in protection to prevent overcharging.

While it's possible to use a car battery charger, leisure battery chargers are specifically designed for deep-cycle batteries and offer better charging profiles.

It's recommended to charge your leisure battery at least once a month, even if you're not using your caravan, motorhome, or campervan.

Power Systems

Electrical Components

Power Banks

Victron Energy

shop by application

shop electrical parts

Shop Power Banks

Shop Victron Energy

WATER & PLUMBING

diesel heaters

Fridges & Freezers

cooking

ventilation & sky lights

Batteries

Battery Chargers

DC to DC charging

Battery & charging Accessories

Inverters

Victron Electrics

shop by battery type

shop by brand

shop by type

shop by kit

shop by type

shop by type

shop by BRAND

shop VICTRON ELECTRICS

solar Panel Kits by size (w)

Solar Panel Kits by Vehicle

Solar Panel Kits by Price (£)

all solar panel kit categories

Solar Panels

solar panel cables & accessories

shop solar panel kits by size (W)

shop solar panel kits by vehicle

shop solar panel kits by price

shop all solar panel kit categories

shop solar panels by size (W)

shop solar panels by type

shop solar panel cables & accessories

Motorhomes

Motorhome Brands Power Upgrades

Power Systems

shop by application

Electrical Components

shop electrical parts

Power Banks

Shop Power Banks

Victron Energy

Shop Victron Energy

Batteries

shop by battery type

shop by brand

Battery Chargers

shop by type

DC to DC charging

shop by kit

Battery & charging Accessories

shop by type

Inverters

shop by type

shop by BRAND

Victron Electrics

shop VICTRON ELECTRICS

solar Panel Kits by size (w)

shop solar panel kits by size (W)

Solar Panel Kits by Vehicle

shop solar panel kits by vehicle

Solar Panel Kits by Price (£)

shop solar panel kits by price

all solar panel kit categories

shop all solar panel kit categories

Solar Panels

shop solar panels by size (W)

shop solar panels by type

solar panel cables & accessories

shop solar panel cables & accessories

Motorhomes

Motorhome Brands Power Upgrades

Expertise in Off-Grid Solutions