In Stock

Victron Monocrystalline panel 55W-12V Mono 545x668x25mm series 4a SPM040551200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£59.00

Victron Energy Interface MK3-USB (VE.Bus to USB) – ASS030140000

The MK3-USB allows the following products to connect to a computer for configuration and firmware updates: Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.

...Read more View Product

£209.99

Victron Energy SmartSolar MPPT 150V 45A – 150/45 SCC115045212

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultrafast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F). Flexible charge algorithm Fully programmable charge algorithm (see the software page on Victron), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection – Over-temperature protection and power derating when temperature is high. – PV short circuit and PV reverse polarity protection. – PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function Brand Victron Energy Manufacturer Part Number SCC115045212 GTIN 8719076053026 Voltage 12/24/48V Rated Charge Current 45A Nominal PV Power, 12V 650W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H130 x W186 x D70mm Weight 1.25Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£109.99

High Efficiency 30A Mppt Solar Charge Controller For Solar Panels Up To 390W (12V) / 780W (24V) Up To 100V

MPPT Technology:This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined input solar power allowed for this controller is 390W for a 12V battery system or 780W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full system protection:This charge controller features a comprehensive set of electronic protection functions to ensure the maximum possible efficiency of your solar system. These include: reverse current prevention at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, solar panel over voltage, over load, short circuit and reverse polarity protection. The controller also has self-diagnostic capability and highlights any system errors using advanced fault-targeting technology. Lithium Battery charging:This solar charge controller is compatible with lithium batteries when a lithium battery charging program is selected using PC software (see below for more details).Advanced system monitoring:The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel)Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energyEasy to use buttons allow the user to manually select the battery type (sealed, flooded or gel) and program load settings (e.g. set timers for lighting, fans, pumps etc).Current limiting function (30A) allows the possibility of adding more solar panels to your solar system in the future Multiple connectivity optionsThis model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only). If using the RJ45 to USB cable, the user also has the option to create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and can also set the charging parameters for lithium batteries.Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. (Inbuilt temperature sensor is not enabled for lithium batteries).

...Read more View Product

£94.99

12V 30A - Fogstar 240v LiFePO4 Charger

The NEW Fogstar Drift LiFePO4 chargers have been designed specifically to work with Lithium Iron Phosphate batteries.These user-friendly chargers are packed with extensive protective features, and are of a high seismic grade, ideal for use during off-grid adventures. PRODUCT SPECIFICATIONSWorking Temperature -30°c ~ +40°cStorage Temperature -40°c ~ +70°cRelative Humidity 5% ~ 95%Heat Dissipation Mode Fan CoolingInput Voltage 180-260 VACInput Frequency 50Hz / 60 HzChemistry LiFePO4DC Output 14.4V / 30A

...Read more View Product

£290.99

Victron 130W Monocrystalline Solar panel kit with SmartSolar MPPT, Cables & MC4

130W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats Panel sizes are 1020x668x30mm This 130w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron Smartsolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit with Victron 130W Monocrystalline panel, optional plastic or aluminium mounting brackets, Cable entry Gland, Victron 75/15 Smartsolar MPPT charge controller, 10m of Black PV Cable (2 x 5m) & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cables with In-Line Fuse. Mounts Optional: 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets Ideal for charging battery banks up to 250ah This highly efficient Victron solar 130w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£9.44

Blue Sea 5065 BS5065 Fuse Holder ATO/ATC Waterproof

Waterproof In-Line ATO/ATC Fuse holder BS5065 Blue Sea 5065 For use with ATO or ATC fuses Supplied with 12 AWG pigtails 30A Maximum fuse amperage Fuse sold separately

...Read more View Product

£835.00

Victron Energy MultiPlus-II 48V 5000VA 70A 50A – PMP482505010

The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. Features A MultiPlus, plus ESS (Energy Storage System) functionality The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual. PowerControl and PowerAssist – Boosting the capacity of the grid or a generator A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters. Two AC Outputs The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output. Virtually unlimited power thanks to parallel and three phase operation (not available for the 8k and 10k models) Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity. On-site system configuring, monitoring and control Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel. Remote configuring and monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. Brand Victron Energy Manufacturer Part Number PMP482505010 GTIN 8719076047599 Voltage 48V Cont. Output Power at 25°C 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 70A Protection Category IP22 Efficiency 96% Bluetooth Compatible Yes Dimensions H565 x W320 x D149mm Weight 30Kg Warranty 5 Years

...Read more View Product

£689.99

Iconica 5000W 48V Hybrid Off Grid Solar Inverter With 6000W Solar Input, 80A Mppt And 100A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica 5000W 48V hybrid inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A MPPT solar charge controller and a 100A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This inverter features the rare and unique ability to power AC appliances without connection to a battery - directly from solar power.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent, or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g., remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 5000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 5000VA of continuous power with a strong peak power handling capability of up to 10000VA (to start powerful appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 6000W high solar input MPPT Solar charge controller: Regulates the input from the solar panels and charges the batteries at up to 80A, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. Advanced MPPT technology extracts the maximum possible output from the solar panels and operates at up to 98% efficiency. This inverter is therefore well-suited to systems with a large and powerful solar array, with a maximum allowed solar input of 6000W. Performance data for the solar array is displayed on the LCD screen. 3. Enhanced 100A Smart battery charger: Designed to enable safe, efficient, and fast (up to 100A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 8 further inverters), offering the possibility of large-scale system expansion, with up to 45kw of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately).Additional intelligent features:The Iconica 5000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Load power without a battery: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. By powering loads using the energy directly supplied from the solar panels, this Iconica inverter offers a uniquely independent and versatile power system, free from batteries if preferred. Removing the need for batteries also increases the efficiency of the energy generated from the solar array by reducing the power losses that this transfer of energy would usually cause. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. For example, if 4000W of solar power is flowing into the inverter, 2000W can be used to run appliances whilst the remaining 2000W will be used for charging the battery bank. - Output source priority: This intelligent feature allows the user to set output source preferences (solar/battery power/mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g., which source of energy is given priority for the AC output if solar power is insufficient/if battery voltage is too low/if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/using a combination of solar power and mains power/from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/battery/AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email/push notification/SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 48V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries. Inverter specifications: Nominal battery voltage: 48V Continuous power output: 5000W/5000VA (220-240V AC) Surge power: 10000VA Output frequency: 50 Hz/60 Hz Output waveform: Pure sine wave Maximum solar input power: 6000W Maximum open circuit solar input voltage: 450V Solar MPPT operating voltage: 120-430V DC Maximum solar input current: 27A Maximum solar charging current: 80A Maximum mains AC charging current: 100A Maximum combined charging current: 100A Peak efficiency: 90% Solar/AC charger max efficiency: 98% Operating temperature: -10°C to 50°C Supplied with a PC connection cable and software Paralleled operation with up to 8 further units, using a parallel connection kit Size: 120 x 295 x 468 mm Weight: 11 kg

...Read more View Product

£45.94

Victron Energy Orion-Tr 24/12V 20A (240W) DC-DC Converter – ORI241220200

Victron Energy Orion-Tr 24/12V 20A (240W) DC-DC Converter – ORI241220200 High efficiency Using synchronous rectification, full load efficiency exceeds 95%. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools are needed for installation. Brand Victron Energy Manufacturer Part Number ORI241220200R GTIN 8719076023005 Voltage 24/12V Cont. Output Current 20A Protection Category IP43 Efficiency 97% Bluetooth Enabled No Dimensions H73 x W94 x D45mm Weight 0.25Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£69.49

20W Reinforced Semi-Flexible Solar Panel With A Durable Etfe Coating (German Solar Cells)

This high efficiency 20W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 20W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 1.1kg) which is great for all vehiclesHigh resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts.Sealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 0.9m of cable specially designed for solar panels to carry high currents with negligible power loss (2.5mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system, for linking several panels together or for connecting 2.5mm extension cable. Solar panel specifications: Peak power: 20W Maximum power voltage: 17.5V Maximum power current: 1.14A Open circuit voltage: 21.6V Short circuit current: 1.21A Power allowance range: +/- 5% Solar Panel Dimensions: 450 x 350 x 4 mm Junction Box Dimensions: 90 x 16 x 16 mm Weight: 1.10 kg 2 x 0.9m of high quality single core solar cable (2.5mm² cross section) Male and female MC4 connectors

...Read more View Product

£429.99

200W Black Semi-Flexible Fiberglass Solar Panel With Round Rear Junction Box and durable ETFE coating

200W Black Semi-Flexible Fiberglass Solar Panel With Round Rear Junction Box and durable ETFE coating - 3 Year Warranty At Photonic Universe we love high quality solar products. That's why we have developed this highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This model also features a rear-fitted circular junction box and 3m dual core cable. This high efficiency 200W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 3.65kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Junction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting. Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 9-busbar solar cells: This panel also features new generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Simple, professional installation: This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut into the roof/surface. This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark-coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Solar panel specifications: Peak power: 200W Maximum power voltage: 17.6V Maximum power current: 11.36A Open circuit voltage: 23.8V Short circuit current: 12.05A Dimensions: 1390 x 710 x 2 mm Weight: 3.65 kg This product comes with a 3-year workmanship warranty which covers material and production defects

...Read more View Product

£119.99

200W Monocrystalline Solar Panel with 90cm cable

This high-efficiency, waterproof 200W monocrystalline solar panel is an ideal energy solution for customers who seek reliable, renewable power for their camper vans and adventure vehicles. Designed for permanent outdoor installation, it effortlessly provides free electricity to charge 12V batteries, powering various essentials including lighting, refrigeration, electronics, and more. Whether you're customizing your van for off-grid living, weekend getaways, or extended road trips, this solar panel is also versatile enough to support additional applications such as motorhomes, boats, off-grid cabins, farms, or remote setups requiring power for telecommunications and monitoring equipment. The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions. This panel also features innovative multi-busbar solar cells, which are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. Solar panel specifications: Peak power: 200W Maximum power voltage: 17.49V Maximum power current: 11.44A Open circuit voltage: 21.12V Short circuit current: 12.24A Power allowance range: +/- 3% Dimensions: 1038 x 992 x 30mm Weight: 10.5 kg 8 mounting holes 2 x 90cm of high quality single core solar cable (4.0mm cross section) Male and female MC4 connectors

...Read more View Product

£269.00

200W 12V High Efficiency Rigid Solar Panel

This high efficiency, waterproof 200W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps). The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system or 6mm Extension Cable The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller. The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. If you are planning to use this solar panel to charge a 12V battery or battery bank: please note this panel requires a solar charge controller / regulator to charge a 12V battery. Solar panel specifications: Peak power: 200W Maximum power voltage: 20.2V Maximum power current: 9.9A Open circuit voltage: 23.9V Short circuit current: 10.52A Power allowance range: +/- 3% Dimensions: 111 x 99.2 x 4 cm Weight: 13.3 kg 8 mounting holes 9 x 11 mm 2 x 5m of high quality single core solar cable (6.0mm cross section) Male and female MC4 connectors

...Read more View Product

£329.00

AMPS - F50 - 12V | 24V compressor fridge 50L

AMPS - F50 - 12V | 24V fridge 50L Bidirectional Door Hinge - on install Capacity: 50L Galley style - built in fridge. 12V / 24V DC input LG Compressor Refrigeration 2 (Fridge + Freezer) Each compartment has a settable temperature via the app or via the fridge itself Internally lighting Fridge : 0-8 Celsius. Freezer : -12 to -20 Celsius. Configurable on digital display 380 x 479 x 532mm Door hinge side can be adjusted on installLEFT or RIGHT opening

...Read more View Product

£35.99

Blue Sea 2151 Fuse Block TERMINAL 30-300A Dual

Compact, high-amp fuse?appropriate for DC Main, inverter, windlass, and bow thruster circuit protection. Provides high current protection in tight space constraints. Ignition protected when used with Blue Sea Systems' MRBF Terminal Fuse. Isolated stud design uses standard M8 hardware and permits stacking of terminals. Insulating cap prevents accidental shorts. Accepts 5?16" ring terminals. Mounts on 3/8? terminal studs. Fuse sold separately

...Read more View Product

£999.99

Indel B Off Slim 140 Compressor Fridge 140L

The Indel B Slim 140 fridge measures 1454(H) x 420(W) x 504mm(D), ideal for installation in vehicles with small interiors. Its vertical design provides a large internal storage space of 140 litres. The fridge is fitted with an LED display with Power Saving and Silent Night modes, a customised door panel with reversible opening and a handle with a lock, ensuring ventilation when the fridge is off. Other features include a large freezer space, two inner door balconies, a salad crisper and opening shelves allowing for bottles to stand vertically. The Indel B easy-fix system enables fixing screws to be inserted directly from inside the refrigerator via the guide holes to the walls of the cabinet, without interfering with the effectiveness of the side insulation of the fridge. - Climate class: ST Refrigerant gas: R290a Brand Indel B Type Integrated Fridges Voltage Description 12V - 24V DC Model Slim 140 Height Description 1454mm Width 420mm Depth 540mm Weight 38kg Colour Black Wattage 70W Approvals CE, E-mark, EMC Consumption 450W/24h Capacity Description 140 Litres Country of Origin Italy

...Read more View Product

£379.99

Sharp High Performance NU-JC410B Black High Efficiency PERC Solar Panel

This MCS certified panel is perfect for a wide variety of applications, from grid-tie household systems to off-grid installations where mains power is limited or unavailable such as boats, caravans, campervans, cabins or glamping huts. These high-power panels are ideal for large systems where the time and expense of fitting a high wattage array needs to be minimised. High efficiency solar cells use PERC technology with 10 busbars to extract more power from a smaller surface area, increasing the output of the panel without increasing the size. The half-cut cell construction decreases internal losses, reduces risk of hotspots and improves performance in shaded conditions. The robust design of the panel is IP68 (waterproof) rated, and tested for resistance against PID, salt mist, ammonia, heavy snow, dust and sand. This thorough testing ensures a long service life even in harsh marine or wilderness conditions. A pair of male / female MC4 connectors are crimped on the end of the cable for easy waterproof connection to other solar panels, extension leads or your existing system. With a 25-year product guarantee for EU countries (12-year globally), and up to a 25-year power output guarantee, you can be confident in the quality, durability and longevity of this premium solar panel. Specifications: Peak power: 410W Maximum power voltage: 31.3V Maximum power current: 13.1A Open circuit voltage: 37.79V Short circuit current: 13.81A Power tolerance: 0/+5% Dimensions: 1722 x 1134 x 30 mm Weight: 21.8 kg Mounting holes for ease of installation 2 x 1.25m of high-quality single core solar cable Male and female MC4 waterproof connectors The product is covered by up to a 25-year product guarantee provided by Sharp Electronics. In addition, solar cells are guaranteed to produce at least 98% of nominal power in the first year after purchase and less than 0.54% degradation of nominal power each year after until 25 years after purchase, for a minimim of 85%.

...Read more View Product

£2.45

SHURflo 90 Degree Wing Nut Fitting 1/2" NPT Female to 19mm ID Hose

SHURflo 90 Degree Wing Nut Fitting 1/2" NPT Female to 19mm ID Hose Part No: 509928 Shurflo wing nut 90 degree hose tail fitting for Shurflo pumps constructed from polypropylene, 1/2" NPT Female x 3/4" Hose tail barb (19mm).

...Read more View Product

£39.99

EcoFlow MC4 To XT60 Solar Cable

With this EcoFlow MC4 to XT60 cable, a solar panel with a standard MC4 output can be connected to the power station.

...Read more View Product

£19.99

Victron VE.Direct Cable 5m (ASS030530250)

Brand Victron Energy Manufacturer Part Number ASS030530250 Cable Length 5m Warranty 5 Years Country of Manufacture China

...Read more View Product

£539.99

270W Black Semi-Flexible Fibreglass Solar Panel With Round Rear Junction Box - DURABLE ETFE COATING

270W Black Semi-Flexible Fibreglass Solar Panel With Round Rear Junction Box - DURABLE ETFE COATING - 3 Year Warranty At Van Junkies we love high quality solar products. That's why we have developed this highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This model also features a rear-fitted circular junction box and 3m dual core cable. This high efficiency 270W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 5.00kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Junction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting. Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 270W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High quality 9-busbar solar cells: This panel also features new generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Simple, professional installation: This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface. This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Solar panel specifications: Peak power: 270W Maximum power voltage: 24.2V Maximum power current: 11.16A Open circuit voltage: 28.6V Short circuit current: 11.83A Dimensions: 1900 x 710 x 2 mm Weight: 5.00 kg

...Read more View Product

£722.00

2kW AUTOTERM Air Diesel Heater Kit with Comfort Controller

Universal Diesel heater camper/Motorhome Kit - 2kW Autoterm water and air heaters are built to ISO 9001-2015 standards. They also have E2 R10 and E2 R122 approval for whole vehicle approval for use in road vehicles. AUTOTERM Air 2D is the most compact diesel-powered air heater from Air series. The heater unit uses fresh air from outside or from a well-ventilated room, then heats it up quickly, thus providing comfort and warmth in low temperature environments. The heater’s maximum power output is 2 kW and it is capable to produce up to 86 m3 of hot air flow hourly, and maintain your desired temperature. With its compact design, AUTOTERM Air 2D can be easily installed or retrofitted in almost any land vehicle, marine transport vehicle and is supplied with a full installation kit, whether you choose the 12V or the 24V DC version. Already reasonably priced, the AUTOTERM Air 2D maintains its low cost further due to its excellent fuel economy (even at maximum power), consuming only 0.24 litres of diesel fuel per hour. All AUTOTERM Air series heaters are equipped with brushless induction motors that ensure low noise levels as well as a long lifetime for the device and the capability to operate in extreme environments and temperatures as low as -45°C/-49°F. AUTOTERM Air heaters can be controlled with various control panels or remotely via your iOS or Android smartphone (remote control modem sold separately). Included in the kit Comfort Controller (Thermostat) 1.5m 60mm Ducting 1 x Heater fitting plate - Turret 1 x 60mm vent 1.5m 60mm Ducting Fuel pump with mounting bracket 1 meter of exhaust with silencer 1 fuel dip fuel tube and fuel line 1 power cable with integral fuse box 1 control panel cable 4m (upgrade options available) 1 fuel pump power cable A silencer air intake 1 exhaust heat lagging A selection of nuts and bolts. Product Details The Autoterm Air 2kW is the most compact heater model in the production line, it is intended for use in Campervans, motorhomes, crew cabins and work spaces, commercial vans and trucks, as well as boats that are up to 33ft. The capacity of the Autoterm Air 2kW air heater is between 0.8 kW and 2 kW, and it is capable of heating up 75 m3 of air hourly. It maintains excellent economy and uses between 0.1 litres and 0.24 litres of diesel per hour. They are available in either 12 or 24v version. Why Autoterm? Best quality diesel heater at a fraction of the price of other Air Diesel Heaters. 2 Year Guarantee. After sales technical help and telephone support 7 days a week. Excellent UK customer service. Low power and fuel consumption. Space saving installation. Simple to operate.

...Read more View Product

£6.99

Blue Sea 5251 Fuse MIDI 40A

Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Sold in packages of 2

...Read more View Product

£13.92

Victron Energy - MEGA-fuse 250A/32V (package of 5 pcs) - CIP136250010

250A Fuse for 12v or 24 systems - Pack of 5 fuses For use with Mega Fuse Holder

...Read more View Product

£715.99

350W MCS certified black semi-flexible solar panel kit

350w MCS Certified Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/30 (5-year panel warranty) This 350w Flexible Durable MCS Certified Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and efficient charging of your battery. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 350w Flexible Durable Solar Panel with MCS Certification Dimensions: 1571 x 1137 x 3.4 mm Victron Energy SmartSolar MPPT 100/30 Sikaflex 522 Caravan / Motorhome Adhesive 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 5 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar panel specifications: Peak power: 350W Maximum power voltage: 27.47V Maximum power current: 12.75A Open circuit voltage: 33.17V Short circuit current: 13.70A Protection: IP68 Dimensions: 1571 x 1137 x 3.4 mm Weight: 7.4 kg 2 x 0.3m of 4.0m² solar cable attached The FMCS-350M is a cutting-edge 350W MCS-certified semi-flexible monocrystalline solar panel that redefines efficiency and adaptability. Built with 182mm silicon wafers, PERC technology, and half-cut cells, this panel maximises power output while reducing energy losses. Its innovative design ensures exceptional durability, lightweight construction, and superior performance, even in challenging conditions. Perfect for curved rooftops, weak load-bearing surfaces, and corrugated metal roofs, the FMCS-350M is the ideal solution for residential, commercial, and industrial solar applications.

...Read more View Product

£399.95

250W MCS certified black semi-flexible solar panel top junction box

The FMCSB-250M is a state-of-the-art 250W MCS-certified semi-flexible monocrystalline solar panel that combines high performance with a sleek, all-black aesthetic. Engineered with 182mm silicon wafers, PERC technology, and half-cut cells, this panel delivers exceptional power output while minimising energy losses. Designed for curved rooftops, weak load-bearing surfaces, and corrugated metal roofs, the FMCSB-250M is ideal for residential, commercial, and industrial solar applications where both efficiency and aesthetics matter. Advanced energy efficiency Utilising PERC and half-cut cell technology, the FMCSB-250M achieves superior energy conversion efficiency, ensuring maximum power generation in a compact and lightweight form. By reducing adaptive losses, it optimises energy output, making it a high-performance choice for installations in diverse environments. Ultra-lightweight & versatile installation Weighing just 4.1kg per unit area, the FMCSB-250M is 70% lighter than conventional solar panels, significantly reducing structural load. Despite its lightweight build, it delivers 190W per square meter of installation area, making it perfect for corrugated metal roofs, coal sheds, and curved rooftops. Its semi-flexible design allows for seamless integration on surfaces where rigid panels are impractical. Enhanced performance in shaded conditions with integrated junction box diodes The FMCSB-250M features a junction box equipped with three bypass diodes, ensuring optimal performance and reliability in various conditions. The integrated diodes mitigate the risk of hot spots caused by shaded or damaged cells, protecting the panel from potential long-term damage. By allowing the panel to continue generating electricity efficiently, even when partially shaded, the diodes enhance total energy production. In scenarios where only a portion of the panel is shaded, the bypass diodes help maintain consistent power flow, preventing significant energy loss. By reducing thermal stress and preventing excessive heat build-up, the diodes contribute to extending the overall durability and lifespan of the panel. When connected in series, the bypass diodes ensure that shading on one panel does not significantly impact the performance of the entire solar array. Built for extreme durability MCS certification guarantees that this solar panel is designed to withstand harsh environments, the FMCSB-250M has passed rigorous weather testing and is resistant to sand, dust, acid, alkali, and salt mist corrosion. Its anti-PID (Potential Induced Degradation) and hail shock resistance ensure long-lasting performance, making it a reliable choice for challenging outdoor conditions. All-black aesthetic Featuring an all-black aesthetic, the FMCSB-250M achieves a seamless, high-tech appearance with near-zero colour variation. Every component, from the cells to the backsheet, is meticulously designed for uniformity and deep black consistency. Whether viewed from different angles or under varying lighting conditions, the FMCSB-250M maintains a cohesive black tone, ensuring a sophisticated and modern look. This design harmonises with contemporary architecture, delivering a true all-black solar roof that enhances both function and form. Long-term reliability & warranty protection For long-term peace of mind, the FMCSB-250M comes with a 5-year quality and performance guarantee for vehicle/boat installations and 10-year for roof installations, along with a 25-year linear power output warranty, ensuring reliable and efficient energy generation for decades. Combining high efficiency, extreme durability, and an elegant all-black aesthetic, the FMCSB-250M semi-flexible solar panel is the perfect solution for those who want cutting-edge solar technology without compromising on design. Whether for residential, commercial, or industrial applications, this panel delivers next-level performance with a visually stunning appearance. Solar panel specifications: Peak power: 250W Maximum power voltage: 20.23V Maximum power current: 12.37A Open circuit voltage: 24.85V Short circuit current: 13.34A Protection: IP68 Dimensions: 1756 x 770 x 3.4 mm Weight: 5.6 kg 2 x 0.3m of 4.0m² solar cable attached This product is covered by a 5 year workmanship warranty for vehicle/boat installations and a 10 year warranty for roof installations

...Read more View Product

£325.49

Victron 185W Mono Solar Panel Kit with SmartSolar MPPT 75/15, Solar cable and Mounts

This 185w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency.This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. Victron Energy Solar Panel 12V 185W Mono series 4a Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Victron Energy SmartSolar MPPT 75V 15A A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on our website for details Day/night timing and light dimming option See the software section on Victron for details Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. Victron Energy Solarcable L=5m/4sqmm MC4-M/F 5m/4spmm MC4-M/F of Solarcable Z Bracket Mounting Aluminium Fixing Set These brackets are made from 2mm aluminium Included: 4x Z-Shape Tabbed Solar Panel Brackets 8x Stainless Steel Self Tapping Screws 4x Stainless Steel Spring Washers 4x Stainless Steel Short Bolts 4x Stainless Steel Washers 4x Stainless Steel Nuts Brand Victron Energy Manufacturer Part Number SPM041851200, SCC075015060R, 2x SCA000500000 and Z Bracket Solar Panel Voltage 12V Nominal Power 175W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Solar Panel Dimensions L1485 x W668 x D30mm Solar Panel Weight 11Kg Solar Panel Country of Manufacture China MPPT Voltage 12/24V Rated Charge Current 15A Nominal PV Power, 12V 220W Max. PV Short Circuit Current 15A Max. PV Open Circuit Voltage 75V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes MPPT Dimensions H100 x W113 x D40mm MPPT Weight 0.5Kg MPPT Country of Manufacture India Cable Length 5m Cable Thickness 4sqmm Cable Country of Manufacture China Warranty 5 Years Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£388.99

200W Semi-Flexible Fibreglass Solar Panel With Durable Etfe Coating

200W Semi-Flexible Fibreglass Solar Panel With Durable Etfe Coating - 3 Year Warranty At Photonic Universe we love high-quality solar products. That's why we have developed this highly durable semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This high-efficiency 200W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and backup solar power systems. The panel can also be used to provide a direct power supply for applications not sensitive to changes in input voltage/current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 3.65kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High-quality 9-busbar solar cells: This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 200W Maximum power voltage: 17.6V Maximum power current: 11.36A Open circuit voltage: 20.8V Short circuit current: 12.05A Dimensions: 1420 x 710 x 2 mm Weight: 3.65 kg This product comes with a 3 year workmanship warranty which covers material and production defects

...Read more View Product

£179.99

Exide EP800 Dual AGM Battery (017) 95Ah 850cca

Exide EP800 Dual AGM Battery (017) 95Ah 850cca Exide DUAL AGM battery range is designed for boats and caravans with one battery bank for all consumers. It is also suitable for additional batteries applied directly to electrical winches, thrusters and trolling motors. The batteries are partially discharged during use. DUAL AGM’s reinforced design, combined with a good recharging procedure, is key to providing the best result and service life. The DUAL AGM battery range, with Wh* performance from 450-2100 Wh, is the ideal choice to cover all dual-supply needs for the most popular recreational boats. BENEFITS Ideal for most popular range of motorhomes & caravans High mounting flexibility Maintenance free High vibration & tilt resistant, spill-proof, leak-proof With AGM technology (absorbed glass mat flat plate or orbital) with VRLA venting (valve regulated) , Wh* performance range coverage goes from 450Wh to 2100Wh Manufacturer: ExidePart Number: EP800Weight: 26.5kgLength: 353mmWidth: 175mmHeight: 190mmVoltage: 12VCapacity (AH): 95Cold Cranking (EN): 850Terminal Layout: + rightBattery Type: AGMWarranty: 12 MonthsApplication: Engine Start

...Read more View Product

£375.00

Victron Energy AGM Dual Purpose Battery 12V 165Ah (M8) - BAT412151085

The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches.VRLA AGM: design life 7-10 yearsFeaturesVRLA technologyVRLA stands for Valve Regulated Lead Acid, which means that the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure.VRLA batteries are maintenance free for life.Sealed (VRLA) AGM BatteriesAGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of high currents than gel batteries.Low Self-DischargeBecause of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C.Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions.Exceptional Deep Discharge RecoveryVictron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge.Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries, Victron batteries are no exception.Battery Discharging CharacteristicsThe rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C. The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge. The effective capacity decreases with increasing discharge current (see table 1). Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter. GTIN 8719076037040 Voltage 12V Battery Capacity (C20) 165Ah Cold Cranking 600CCA Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) L485 x W172 x H240mm Weight 47Kg Warranty 2 Years Country of Manufacture Vietnam Battery Technology AGM Battery Application Dual Purpose

...Read more View Product

£237.99

SunPower 100W Solar Panel 12V Premium Flexible Panels

SUNPOWER 12v 100w Monocrystalline Semi Flexible Panel Ideal for the Marine Environment: Easy and Low Cost Installation: You can install the Sunpower panels with adhesives and/or use of stainless steel grommets in the panel. The panels have standard quick-connect cables. An easy-to-follow installation guide is also provided with each panel. Warranty: 5 years limited power warranty of 80% of the minimum specified power rating. Designed in the USA and assembled in France. SunPower® flexible panels are lightweight and portable, so you can take them on your next adventure. Plus, The Sunpower panels feature the highest-efficiency solar cells available which as a result means more power or faster charging times for solar-compatible batteries. Designed for ToughnessThe SunPower Maxeon® Solar Cell is the only cell built on a solid copper foundation. As a result SunPower cells are resistant to power loss via cracking and corrosion, unlike conventional cells, which are much more likely to lose power when bent or subjected to a moist environment. SunPower flexible panels are the #1 choice for customers due to the combination of high power and cell ruggedness. Made with SunPower’s highest-efficiency Maxeon® solar cells, The SUNPOWER 12v 50w Monocrystalline Semi Flexible Panel delivers the most power and highest charging capacity in its product class. Sunpower manufactures their panels using a top-grade, lightweight polymer material, allowing for easy transport, installation, and flexibility up to 30 degrees. They come with MC4 male and female connectors that can connect easily to solar-compatible devices. SunPower SPR-E-Flex-100 Features: Ratings: Voltage 17.1 VDC; Current 5.9 Amps; Power 100W Dimensions: Length 45.9"; Width 21.9", Depth 0.8" Model: SPR-E-Flex-100 Premium SunPower® 100W E-flex solar panel Dimensions: 45.9"(L) x 21.9"(W) x 0.1"(W) (0.8" including J-Box) Weight: 4.4lbs - Lightweight, Portable & Easy to Stow Rated Voltage (Vmpp) 17.1V | Rated Current (Impp) 5.9A - Powerful Flexible up to 30 degrees - Suitable for Irregular Surfaces 32 high efficiency (23%) monocrystalline Maxeon™ Gen II prime solar cells - More Power in Less Space Premium cosmetic quality Junction box with by-pass diode has IP67 protection- Robust Design, Water & Dust Proof! 17.7" long cables (12AWG) with PV4-S Connectors (MC4 compatible) - Reliable & Safe with IP68 Protection 6 x 316 Stainless steel grommets (5/16" I.D.) - Diverse Installation Options 5-Year power & 2-Year product warranty (no salt water exclusion) - Backed by SunPower Solar cells are made in the Philippines. Panel is assembled in France Individually packaged & protected for shipping. Includes safety & installation guide Solar cells made in Philippines Solar panel assembled in France

...Read more View Product

£296.99

Sterling Power 12V/24V 30A Battery to Battery Charger BB122430

STERLING POWER PRO BATT ULTRA 12V/24V 30A BATTERY TO BATTERY CHARGER BB122430 Sterling Power Pro Batt Ultra compact design battery to battery charger - 12V DC in /24V DC out. This is the latest model Euro 6+ compatible (identifiable by the green strip on front of the casing) - regenerative braking / smart alternator mode can operate without an ignition feed. Features High power battery to battery charger 12V/24V 30A spec - 12V source battery to charge 24V battery bank Ideal for commercial/leisure vehicles and marine applications Default mode complements regenerative braking and does not require ignition feed Additional modes with ignition feed and timer options 9 preset battery chemistry options plus custom profile settings IP 21 drop proof design (non waterproof) 100% fireproof plastic casing with multi-stage fan cooling Weighs 1.4Kg Measures 190mm x 160mm x 70mm Optional remote control Sterling part number BB122430 DC to DC (Battery to Battery) Wiring Diagram, Information and Help

...Read more View Product

£1,710.00

Victron Energy MultiPlus-II 24/5000/120-50 230V – PMP242505010

The 24/5000-120-50 MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A).It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals. Note: for a short period of time this product was called MultiGrid-II. Features of the MultiPlus-II 24/5000/120-50 PowerAssist The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery. ESS: Energy Storage Systems The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. For examples and more detailed information see the ESS (Energy Storage System) manual. Uninterrupted AC power (UPS function) In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. Remote Monitoring and Control When coupled with a Cerbo GX you can monitor and control your MultiPlus-II 24/5000 and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto-starting a backup generator and more…” If you want to access directly, use the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50. Why not look at the VE.Bus Smart dongle which measures battery voltage and temperature allowing monitoring and control with a smart phone or other Bluetooth enabled device. Brand Victron Energy Manufacturer Part Number PMP242505010 GTIN 8719076052913 Voltage 24V Cont. Output Power at 25°C 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 120A Protection Category IP22 Efficiency 96% Bluetooth Compatible Yes Dimensions H607 x W330 x D149mm Weight 30Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£159.99

Victron Energy BlueSolar MPPT 150/35 – SCC020035000

Victron Energy BlueSolar MPPT 150/35 – SCC020035000 This Victron 150V 35A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 35A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 150-35 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36* /48V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Max solar panel voltage: 150V- Max solar panel power: 500W (12V) / 1000W (24V) / 1500W (36V) / 2000W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -64mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 20mA (12V) / 15mA (24V) / 10mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 130 x 186 x 70 mm- Mounting dimensions: 176 x 71.5 mm- Weight: 1.25kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£251.99

120W 12V Waterproof Portable Folding Solar Charging Kit For Camper, Caravan, Boat

120w Portable Solar Panel This complete 120W 12V folding portable solar charging kit includes:High efficiency 60W + 60W folding monocrystalline solar panelsAdvanced fully automated 10A solar charge controller with enhanced protection functionsAdjustable aluminium stand, handle and latches5m cable with a battery plug and a fuseBattery crocodile clips for ease of connectionStorage / protective caseInstallation manual This portable solar kit has several important features which make it a truly unique, premium quality product:It is completely waterproof, including the solar charge controller fitted on the back (genuine IP67-waterproof solar controller), which means it is suitable for all weather conditionsThe high efficiency 60W + 60W folding monocrystalline solar panels are made of high quality German solar cellsThe protective bag is not just a dust cover - it is a sturdy protective case made with a layer of foam which prevents accidental damage to the frame and glassThe advanced, fully automated 10A solar charge controller provides complete overcharge protection and supports several battery types with different charging parameters for maximum efficiency (sealed, gel, flooded batteries) We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This high quality, waterproof 150W folding solar kit is designed to provide free power for charging 12V batteries, for example in vehicles and boats (motorhome, caravan, camper, narrow boat, yacht etc) or any other systems with a 12V battery or battery bank. It comes with everything required for battery charging: an advanced 10A 12V solar charge controller, and 5m cable with a battery plug, fuse and crocodile clips. You can start using the kit immediately - simply connect it to your battery and find a well-lit area for the folding solar panels.The kit comes with a stand which is very easy to set up and adjust. A handle and latches ensure ease of storage and portability. The storage case included with the kit is made with a layer of foam, which will completely protect the glass and the frame and prevent any accidental damages. In addition, the corners of solar panels are protected by plastic which reduces the risk of damage and adds to the aesthetically pleasing design.The 10A waterproof solar charge controller included with the kit will protect your battery from over-charging (it controls the state of charge of your battery every second). The controller has many other protection functions, such as stopping reverse current at night (from the battery back to the solar panel), incorrect polarity and short circuit protection. Controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. PWM technology can also recover some lost battery capacity.In addition, the solar charge controller has a very high degree of water protection - IP67 (which means it's completely sealed), so it is absolutely safe to use this solar kit in all weather conditions.This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings. Requires a RS485 to RJ45 cable to extend from controller to the remote meter.2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users). Requires an RS485 to RJ45 cable to extend from controller to the Wi-Fi module.3) An RS485 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.The kit is suitable for sealed, gel and flooded 12V batteries: the solar charge controller allows battery type selection for maximum efficiency of charging.Solar panel specifications:Peak power: 120WMaximum power voltage: 17.5VMaximum power current: 6.86A ( 2x 3.43A)Open circuit voltage: 21.6VShort circuit current: 7.4A (2 x 3.7A)Power allowance: +/- 3%Dimensions: 51 x 77 x 7 cm (folded)Weight: 12.8kg Advantages of Portable Solar Portable solar panels have quickly become a popular option for those looking to harness the power of the sun while on the go. These panels offer a number of advantages over traditional, fixed solar panels, making them a great choice for a wide range of applications. First and foremost, the most obvious advantage of portable solar panels is their portability. They can easily be transported and set up wherever you need them, which makes them ideal for camping, RVing, boating, and other outdoor activities. This portability allows you to harness the power of the sun no matter where you are, providing you with reliable and sustainable power sources. Another major advantage of portable solar panels is that they are easy to install. Unlike traditional, fixed solar panels, which often require professional installation, portable solar panels can be set up by just about anyone. This makes them a great option for people who are on a tight budget, or who want to avoid the hassle of professional installation. In addition to being portable and easy to install, portable solar panels are also highly efficient. They use advanced technology to track the sun and optimize power output, which helps to ensure that they are producing as much power as possible. This efficiency means that even small portable solar panels can produce enough power to meet the needs of most portable devices, making them a great choice for powering laptops, tablets, and other electronic devices. Lastly, portable solar panels are also very cost-effective. They are often less expensive than traditional, fixed solar panels, which can make them an attractive option for people who are on a tight budget. Overall, portable solar panels are an excellent choice for anyone looking to harness the power of the sun while on the go. They are portable, easy to install, highly efficient, and cost-effective, making them a great choice for a wide range of applications. Whether you're camping in the wilderness, boating on the open water, or just looking for an alternative power source, portable solar panels are a great option to consider.

...Read more View Product

£545.00

270w Black Flexible Durable ETFE Solar Panel Kit with Victron SmartSolar MPPT 100/20

270w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/20 - (These kits are perfect for pop top roofs VW T6/T5/T4). Cable exits underneath the panel for a super-neat installation. This 270w Flexible Durable ETFE Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and efficient charging of your battery. The ETFE material of the solar panel makes it extremely durable and resistant to extreme weather conditions. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 270w Flexible Durable Solar Panel with ETFE Coating Dimensions: 1900 x 710mm Victron Energy SmartSolar MPPT 100/20 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 3m of dual core cable 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 3 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar Panel Specifications: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 5kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 270W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 270W Maximum power voltage: 24.2V Maximum power current: 11.16A Open circuit voltage: 28.6V Short circuit current: 11.83A Dimensions: 1900 x 710 x 2 mm Weight: 5.00 kg MPPT Specifications The Victron 100V 20A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent battery life function.Ultrafast MPPT Technology:This 20A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high-speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 100/20 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£499.99

440W MCS certified semi-flexible solar panel top junction box

The FMCS-440M is a cutting-edge 440W MCS-certified semi-flexible monocrystalline solar panel that redefines efficiency and adaptability. Built with 182mm silicon wafers, PERC technology, and half-cut cells, this panel maximises power output while reducing energy losses. Its innovative design ensures exceptional durability, lightweight construction, and superior performance, even in challenging conditions. Perfect for curved rooftops, weak load-bearing surfaces, and corrugated metal roofs, the FMCS-440M is the ideal solution for residential, commercial, and industrial solar applications. Advanced energy efficiency With an advanced combination of PERC and half-cut cell technology, the FMCS-440M achieves superior energy conversion efficiency, ensuring maximum power output from every module. By minimising adaptive losses, this panel optimises energy generation, making it a high-performance choice for solar installations in various environments. Exceptional power-to-weight ratio & versatile installation Designed for ease of installation and adaptability, the FMCS-440M is exceptionally lightweight at just 4.1kg per unit area, making it 70% lighter than conventional solar panels. Despite its ultra-lightweight construction, it delivers an impressive 200W per square meter of installation area, making it ideal for surfaces with low load-bearing capacity, such as corrugated metal roofs, coal sheds, and curved rooftops. Enhanced performance in shaded conditions with integrated junction box diodes The FMCS-440M features a junction box equipped with three bypass diodes, ensuring optimal performance and reliability in various conditions. The integrated diodes mitigate the risk of hot spots caused by shaded or damaged cells, protecting the panel from potential long-term damage. By allowing the panel to continue generating electricity efficiently, even when partially shaded, the diodes enhance total energy production. In scenarios where only a portion of the panel is shaded, the bypass diodes help maintain consistent power flow, preventing significant energy loss. By reducing thermal stress and preventing excessive heat build-up, the diodes contribute to extending the overall durability and lifespan of the panel. When connected in series, the bypass diodes ensure that shading on one panel does not significantly impact the performance of the entire solar array. Built for extreme durability MCS certification guarantees that this solar panel is designed for durability. It has undergone rigorous weather testing and is built to withstand harsh environmental conditions. The panel is resistant to sand, dust, acid, alkali, and salt mist corrosion, making it suitable for installations in extreme climates. Additionally, its anti-PID (Potential Induced Degradation) and hail shock resistance further enhance its longevity and reliability. Long-term reliability & warranty protection For long-term peace of mind, the FMCS-440M comes with a 5-year quality and performance guarantee for vehicle/boat installations and 10-year for roof installations, along with a 25-year linear power output warranty, ensuring reliable and efficient energy generation for decades. The FMCS-440M semi-flexible solar panel is the perfect combination of innovation and efficiency, offering superior performance in any environment. Whether for residential, commercial, or industrial applications, this high-efficiency panel provides a reliable, sustainable energy solution for years to come. Solar panel specifications: Peak power: 440W Maximum power voltage: 34.48V Maximum power current: 12.77A Open circuit voltage: 41.73V Short circuit current: 13.76A Protection: IP68 Dimensions: 1940 x 1137 x 3.4 mm Weight: 9.0 kg 2 x 0.3m of 4.0m² solar cable attached This product is covered by a 5 year workmanship warranty for vehicle/boat installations and a 10 year warranty for roof installations

...Read more View Product

£297.99

Rolls Series 5 S12-128 AGM Deep Cycle Battery

Deep cycle refers to applications that typically discharge 60-80% of the battery capacity. The Rolls S Series S12-128 AGM Deep Cycle AGM battery features thick plates with a high density active material. This design allows for reserve energy to be stored deep within the battery plates and released during slow discharge. The Rolls AGM range are sealed, non hazardous and completely maintenance free and?will suit the customer looking for a long reliable, maintenance free service life. Rolls has designed a Deep Cycle VRLA battery with high reserve capacity, long cycle life and low internal resistance, while achieving superior cranking performance. Rolls AGM batteries are the smart choice for demanding renewable applications.They are designed and built differently than standard batteries. They use more lead, heavier plates and other proprietary materials that enable them to deliver more power and capacity over many life cycles. Specifications Weight 32 kg 70.5 lbs Length 32.8 cm 12.91" Width 17.5 cm 6.89" Height Inc. Term. 23.7 cm 9.33" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Nylon Strap Series AGM-S Warranty See Warranty Terms Volts 12 BCI Grp 31 Cells 6 Terminal Type DT Included Hardware Stainless Steel Nuts & Bolts Size & Thread DT Charge Charge Voltage Range 14.5-14.9 V/cell @ 25°C (77°F) Float Voltage Range 13.6-13.8 V/cell @ 25°C (77°F) Recommended Charge Current 25 A Maximum Charge Current 35 A Self-Discharge Rate Less than 2% per month at 25°C (77°F) Internal Resistance 5 mΩ Capacity Cold Crank Amps (CCA) 0°F / -18°C 800 Marine Crank Amps (MCA) 32°F / 0°C 1000 Reserve Capacity (RC @ 25A) 220 Minutes Reserve Capacity (RC @ 75A) 70 Minutes Capacity Affect by Temperature 40°C(104°F) 25°C(77°F) 0°C(32°F) -15°C(5°F) 102% 100% 85% 65% Hour Rate Capacity / AMP Hour Current / AMPs @ 100 Hour Rate 128 AH 1.28 A @ 20 Hour Rate 115 AH 5.75 A @ 10 Hour Rate 105 AH 10.5 A @ 5 Hour Rate 97 AH 19.3 A Cut Off Voltage Constant Current Discharge VPC 1 hr 2 hr 3 hr 5 hr 8 hr 10 hr 62.1 33 27 18.2 11.9 10.5 View all Rolls Batteries

...Read more View Product

£94.89

Victron Energy Blue Smart IP67 Charger 12V 7A 1 Output – BPC120747026

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on Brand Victron Energy Manufacturer Part Number BPC120747026 GTIN 8719076035923 Voltage 12V Charge Current 7A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP67 Efficiency 93% Bluetooth Enabled Yes Plug Type CEE 7/7 Dimensions H85 x W211 x D60mm Weight 1.8Kg Warranty 5 Years

...Read more View Product

£185.00

Lynx Distributor (M10) LYN060102010

Lynx Distributor Board - 4way - 1000A capacity - Mega fuses not included, supplied separately - M10 - (LYN060102000) A modular DC busbar with spaces for four DC fuses. It monitors the status of each fuse and displays its condition with an LED on the front. The Lynx Distributor is part of the modular Lynx distribution system, available as M8 and M10 models. The Lynx Distributor contains a positive and a negative busbar. The positive busbar has four fuse-protected connections with fusemonitoring. The negative busbar has four connections and a ground connection. It is part of the Lynx Distribution system and isavailable in two versions, with M8 or M10 busbar. Note that M10 refers to the busbar connection joints where the modules areconnected to each other. The fuse and cable connections are always M8.The Lynx Distributor has a power LED and four fuse status indication LEDs.If connected to a Lynx Smart BMS, up to 4 Lynx Distributors can send fuse status information to the Lynx Smart BMS

...Read more View Product

£29.99

Victron M8 Connector Male/Female 3 Pole Cable 1m (Bag Of 2)

ASS030560100 - This cable can be used to extend the BMS communication cables between a Lithium Battery Smart and the BMS. It ships in a bag of 2 pieces and is available in 1, 2, 3 and 5 m lengths. PRODUCT CODE: ASS030560100

...Read more View Product

£24.99

Silver Flexi Spotlight with USB Port (12V / 1W / Warm White / IP20)

Camper & Caravan Silver Flexi Spotlight with USB Port (12V / 1W / Warm White / IP20) A silver acrylic spotlight with a flexible body and Warm White 3000K LEDs. The 60mm diameter base has an integrated 2.1A USB port enabling smartphones, tablets or any other USB-compatible rechargeable device to be charged. The USB socket is powered both when the light is on and off. - Voltage: 12V - Wattage: 1W - Protection rating: IP20 - Colour temperature: Warm White (3000K) - Lumens: 70 - Switched: Yes - Dimmable: No - USB port: Yes, 5V - 2.1 A SPECIFICATION Light Colour Warm White (3000K) Light Output 70 Lumens Brand Dimatec Type Flexible LEDs Voltage Description 12V DC Rating IP20 Height Description 150mm Finish Mirror Polished Weight 0.14kg Wattage 1W Dimmable No Diameter Description Base: 60mm Case Colour Mirror Polished

...Read more View Product

£494.99

Victron 185W Mono Solar panel kit with SmartSolar MPPT, AGM Battery & Accessories

185W Victron Energy Solar Panel Kit with 100ah AGM Battery and all Accessories Panel sizes are 1485x668x30mm This 185w Solar Panel Kit with 95ah AGM Battery and accessories is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit Including: Victron 185W Monocrystalline panelPlastic corner fixing brackets or Aluminium Z BracketsCable entry Gland, Victron SmartSolar Bluetooth enabled 75/15 MPPT5m of Black PV Cable & MC4 Connectors x 2Resettable Circuit BreakerFused Battery Cable100ah AGM BatteryVictron Battery Isolator Switch This highly efficient Victron solar 185w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging of the battery. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£315.00

NDS Power Service Gold 25amp 3-in-1 B2B‚ MPPT + Mains Battery Charger

The Powerservice Gold fully automatically recharges leisure batteries installed on campers, boats, ambulances and special vehicles. The plus and gold versions integrate a charge regulator for the management of solar panels, and (for the gold version) a 230V mains charger, combining 3 different charging devices in a single device! The device, controlled by a microprocessor, guarantees a full recharge in half the time compared to the alternator, thus offering more autonomy during your stops. This is also possible thanks to the optimization of the 4 charging curves, selectable through a switch that permits to choose the type of battery to be recharged between Lithium, AGM, Gel, Flooded Acid. Each charging curve is divided into 5 stages, including the Desulphation that, besides guaranteeing a perfect charge, improves the overall performance of the battery by helping to restore the efficiency after long stops, extending its life. Why choose POWERSERVICE? Full charge in less time, to have full autonomy during your stops. Extend the life of your batteries with specific charging curves for all battery technologies. GOLD Main Features: Three different supply sources Microprocessor charge management 5-stage charge with desulfation Lithium, AGM, Gel, Flooded Acid, battery switch Up to 40 Ampère recharge each travel hour Powered by: Alternator Solar Panel Main power supply For use with 12V systems Compatible with smart alternator (Euro 5 and 6) vehicles 25A charging current from B2B Supports up to 250W, 20A solar array Integrated 230V shore hook up charger

...Read more View Product

£26.99

Victron VE Direct To USB Interface - ASS030530010

The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single Colour Control GX. This cable measures 177cm in length.

...Read more View Product

£328.99

150W Semi-Flexible Fibreglass Solar Panel With Durable Etfe Coating

150W Semi-Flexible Fibreglass Solar Panel With Durable Etfe Coating - 3 Year Warranty At Van Junkies we love high-quality solar products. That's why we have developed this highly durable semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This high-efficiency 150W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and backup solar power systems. The panel can also be used to provide a direct power supply for applications not sensitive to changes in input voltage/current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 2.85kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 150W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High-quality 9-busbar solar cells: This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross-section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 150W Maximum power voltage: 19.8V Maximum power current: 7.58A Open circuit voltage: 23.4V Short circuit current: 8.03A Dimensions: 1110 x 710 x 2 mm Weight: 2.85 kg This product comes with a 3 year workmanship warranty which covers material and production defects

...Read more View Product

£180.99

Victron Energy Orion-Tr Smart 12/24V 15A (360W) Non-isolated DC-DC Charger – ORI122436140

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number ORI122436140 gtin 8719076048961 Voltage 12/24V Cont. Output Current 15A Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 88% Bluetooth Enabled Yes Dimensions H130 x W186 x D80mm Weight 1.8Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£21.99

Sinolec Professional 12V 140A Split Charge Voltage Sensitive Relay - VSR

Sinolec Professional 12V 140A Split Charge Voltage Sensitive Relay - VSR - EU Certified Voltage Sensitive Relay / 140A 12Vdc (125A Continuous) / Voltage Range 12.8V to 13.3V / 10mA Standby Power Drain / Built in LED / RoHS, CE / JH-VSR2008.

...Read more View Product

£899.00

EcoFlow DELTA 2

EcoFlow DELTA 2 is a must-have for any home that puts power security & comfort first. Ensure you’re prepared with the power station made for almost any situation your family could find themselves in. All while staying green. With unique 1-3kWh expandable capacity design, DELTA 2 offers a large 1024Wh battery capacity, expandable to 2048Wh with the DELTA 2 Extra Battery or 3040Wh with the DELTA Max Extra battery. It’s flexible and on-demand energy, keeping your appliances running, for everyday use or as home backup. Expandable capacity – 1-3kWh expandable capacity to grow your storage to your needs. Add on the DELTA 2 extra battery to reach 2048Wh, or add on the DELTA Max Extra Battery to hit 3040Wh. Great for home backup or everyday appliances. Huge AC output – 1800W AC output means you can power more than 90% of your home appliances. Or, try plugging in up to 15 devices at once. Unlike other brands, DELTA 2 can prevent overloading from devices up to 2200W thanks to X-Boost technology. 7x Faster AC charging – X-Stream tech means that DELTA 2 charges 7 times faster than the competition. That’s 0–80% in just 50 minutes with AC input. Or go green without sacrificing speed – Plug in portable solar panels and get up to 500W input to charge from anywhere in as fast as 3 hours. Built to last 6x longer – Get up to 10 years of regular use until hitting 80% capacity. That’s down to its LFP battery chemistry giving you 3000+ cycles. Control from anywhere – Use the EcoFlow app to control your DELTA 2 from anywhere using Wi-Fi. Link with Bluetooth when off-grid. Either way, you can check charging data, customize settings and adjust the charging speed with ease. Capacity 1024 Wh Support one DELTA 2 extra battery or DELTA Max extra battery AC Output 4 outlets, 1800W total (Surge 2700W) Max Device(s) Power Supported by X-Boost 2400W USB-A Output 2 ports, 5V, 2.4A, 12W Max USB-A Fast Charge 2 ports, 5V, 2.4A / 9V, 2A / 12V, 1.5A, 18W Max USB-C Output 2 ports, 5/9/12/15/20V, 5A, 100W Max Car Power Output 1 port, 12.6V, 10A, 126W Max AC Charging 1200W Solar Charging 11-60V, 15A, 500W max Car Charging Support 12V/24V battery, 8A DC Charging 1100W Battery Chemistry LFP (LiFePO4 battery) Cycle life 3000 cycles to 80+% capacity Connectivity Wi-Fi & Bluetooth Dimension 15.7 x 8.3 x 11 in / 400 x 211 x 281 mm Net Weight 27 lbs / 12 kg Delta 2 User Manual Ecoflow Delta 2 User Manual

...Read more View Product

£3,199.99

Victron Energy Complete Van Conversion Kit - 3000w Multiplus II Inverter, DC to DC Charger no Batteries

This Van Junkies Victron multiplus inverter/charger 3000w 12v is perfect for any van conversion. This van inverter kit uses only the best premium Victron Energy equipment will allow you to charge your battery in several different ways such as solar from the 370W Monocrystalline panels and Victron SmartSolar MPPT 100/30 solar charge controller, battery to battery charging from the Victron Orion-Tr Smart 12/12-30 DC-DC Charger and hook-up power from the 3000w Victron Multiplus II Inverter/Charger. The kit also comes with the top-of-the-range Victron Energy Cerbo GX / Touch 50 monitoring system. Everything you need for the perfect campervan/motorhome high-end electrical power installation. All of our kits can be tailored to individual requirements so if you need something different give us a call. The Kit Contains:2 X Victron Monocrystalline panels (370w total) 185W-12V Mono 1485x668x30mm series 4a SPM041851200Victron Energy SmartSolar MPPT 100/30 – Solar Charge Controller - SCC110030210Victron Energy MultiPlus-II 12V 3000VA 120A 32A – PMP122305010Orion-Tr Smart 12/12V-30A Non Isolated DC-DC Charger ORI121236140Victron Energy SmartShunt 500A/50mV – SHU050150050Victron Energy Lynx Distributor – LYN060102000Victron Energy - Battery switch ON/OFF 275A - VBS127010010MC4 Cable PV Male & Female ConnectorsPair Of 5M Single Core Extension Cable Leads 4.0Mm For Solar Panels And Solar Charging Kits7m x Battery Cable 16mm 110amp High Quality Extra Flex Cable RED2m x Battery Cable 16mm 110amp High Quality Extra Flex Cable BLACKVictron Energy MEGA-fuse 300A/32V (5 pack) – CIP136300010Victron Energy Midi Fuse 60A/32V (5 PACK) – CIP1320600101m X Extra Flexible PVC Battery Cable - 95mm² 485A RED1m X Extra Flexible PVC Battery Cable - 95mm² 485A BLACK 1 X Victron Energy RJ45 UTP Cable 5m – ASS0300650003 x Victron VE.Direct Cable 5m (ASS030530250)Victron Energy GX Touch 50 – BPP900455050Victron Energy GX Touch 50 Wall Mount – BPP900465050Victron Energy Cerbo GX – BPP900450100Switchable Surface Mount Waterproof Circuit Breaker 50 AmpsDouble Entry Roof Gland2 X Set of 4 Heavy Duty Solar Panel Brackets For Roof Or Surface MountingExternal 230v Hook-up kit

...Read more View Product

£148.55

Victron Energy Lynx Power In – LYN020102000

A modular DC bus bar, used to connect batteries to the Lynx DC distribution system. The lynx power in module is used to connect batteries via an external fuse. It can be useful if you have multiple parallel strings. Due to the extremely high short circuit current potential of most battery banks, it is suggested to use an external fuse system with an appropriate fault current interruption rating (such as an NH HRC). The Power In contains a negative and positive DC bus-bar with M8 bolts in which to connect batteries cables. It can take cables up to 22 mm in diameter through the bottom entry guides, and no limit via the two side connections.

...Read more View Product

£248.99

Victron Energy Orion-Tr Smart 12/24V 15A (360W) Isolated DC-DC Charger – ORI122436120

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. DC to DC (Battery to Battery) Wiring Diagram, Information and Help Brand Victron Energy Manufacturer Part Number ORI122436120 GTIN 8719076047704 Voltage 12/24V Cont. Output Current 15A Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 88% Bluetooth Enabled Yes Dimensions H130 x W186 x D80mm Weight 1.8Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£91.36

Victron Monocrystalline panel 90W-12V Mono 780x668x30mm series 4a SPM040901200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£355.99

Rolls Series 5 S12-160 AGM Deep Cycle Battery

Deep cycle refers to applications that typically discharge 60-80% of the battery capacity. The Rolls S Series S12-160 AGM Deep Cycle AGM battery features thick plates with a high density active material. This design allows for reserve energy to be stored deep within the battery plates and released during slow discharge. The Rolls AGM range are sealed, non hazardous and completely maintenance free and?will suit the customer looking for a long reliable, maintenance free service life. Rolls has designed a Deep Cycle VRLA battery with high reserve capacity, long cycle life and low internal resistance, while achieving superior cranking performance. Rolls AGM batteries are the smart choice for demanding renewable applications.They are designed and built differently than standard batteries. They use more lead, heavier plates and other proprietary materials that enable them to deliver more power and capacity over many life cycles. Specifications Weight 44 kg 97 lbs Length 34.1 cm 13.43" Width 17.2 cm 6.77" Height Inc. Term. 30.9 cm 12.17" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Nylon Strap Series AGM-S Warranty See Warranty Terms Volts 12 BCI SPEC Cells 6 Terminal Type DT Included Hardware Stainless Steel Nuts & Bolts Size & Thread DT Charge Charge Voltage Range 14.7V @ 25°C (77°F) Float Voltage Range 13.8V @ 25°C (77°F) Recommended Charge Current 30 A Maximum Charge Current 40 A Self-Discharge Rate Less than 2% per month at 25°C (77°F) Internal Resistance 3.6 mΩ Capacity Cold Crank Amps (CCA) 0°F / -18°C 795 Marine Crank Amps (MCA) 32°F / 0°C 950 Reserve Capacity (RC @ 25A) 260 Minutes Reserve Capacity (RC @ 75A) 75 Minutes Capacity Affect by Temperature 40°C(104°F) 25°C(77°F) 0°C(32°F) -15°C(5°F) 102% 100% 85% 65% Hour Rate Capacity / AMP Hour Current / AMPs @ 100 Hour Rate 160 AH 1.6 A @ 20 Hour Rate 145 AH 7.25 A @ 10 Hour Rate 126 AH 12.6 A @ 5 Hour Rate 115 AH 23 A Cut Off Voltage Constant Current Discharge VPC 1 hr 2 hr 3 hr 5 hr 8 hr 10 hr 76.9 44.3 31.8 22.7 15.3 12.6 View all Rolls Batteries

...Read more View Product

£655.00

FOXYGEN - 300Ah Lithium Battery with Bluetooth & Heating

The Foxygen 300Ah Lithium Leisure Battery is a high-performance 12V LiFePO4 battery with integrated Bluetooth monitoring, a Smart BMS and switchable heating, designed for reliable power in all conditions. The Foxygen 12V 300Ah LiFePO4 Battery is designed to deliver maximum performance, safety and longevity for demanding leisure and off-grid applications. With its 300Ah capacity and 12.8V nominal voltage, this battery offers outstanding energy storage for extended trips and high-consumption setups. Equipped with a Smart Battery Management System (BMS), the Foxygen 300Ah provides complete protection against overcharge, over-discharge, overcurrent, overheating, short circuits and low-temperature risks, ensuring safe and efficient operation. The inclusion of Bluetooth connectivity enables seamless monitoring via Android or iOS devices, allowing you to track performance in real time. Its switchable heating system ensures safe charging even in freezing conditions, extending usability throughout the year. With up to 6000 cycles at 80% depth of discharge, this battery is built for durability and long-term reliability. Despite its large capacity, the compact 25.5kg design and IP65-rated ABS casing make it practical and resilient for travel and outdoor use. Backed by a 12-year warranty, the Foxygen 300Ah is a powerful, future-ready energy solution for those who require uncompromising performance. 12V 300Ah LiFePO4 battery for dependable long-term energy storage Smart BMS with full protection against overcharge, over-discharge, overcurrent, overheating and short circuits Bluetooth connectivity for real-time monitoring on Android and iOS devices Switchable heating function for safe charging in low temperatures Up to 6000 cycles at 80% depth of discharge for extended service life Lightweight design at just 25.5kg for easy installation and transport IP65-rated ABS casing for protection against dust and water ingress 12-year warranty for complete peace of mind Nominal Voltage: 12.8V Nominal Capacity: 300Ah Parallel Connection: Max 6 Units Series Connection: Max 4 Units BMS: 4S250A Bluetooth: Android/iOS Heat: Yes (Switchable) Circuit Protection: Overcharge, Overdischarge, Overcurrent, Over Temperature, Short Balance, Low temp Cycle Life: 6000 times @80% DOD Self Discharge: Less than 3% per month Charge Efficiency: 100% @0.2C Discharge Efficiency: 98-100% @1C Dimensions: 367mm x 190mm x 245mm Approx. Weight: 26.52 kg Terminal Type: M8 Case Colour/Material: Black Plastic Case (ABS) IP Rating: IP65 Cell Type: 3.2V 304Ah Prismatic Cell Cell Configuration: 4S1P

...Read more View Product

£586.99

200w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15

200w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4) Panel junction box is located at the top rear of the panel - Highly efficient Black German Cells This 200w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 200w Semi-Flexible Durable Black Solar Panel 1420 x 710 x 2 mm Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 2 year warranty on the Solar Panel 5 year warranty on Victron MPPT Double Entry Roof Gland - Black or White Panel Specifications Peak power: 200W Maximum power voltage: 17.6V Maximum power current: 11.36A Open circuit voltage: 20.8V Short circuit current: 12.05A Dimensions: 1420 x 710 x 3 mm Weight: 3.65 kg

...Read more View Product

£173.99

80W Reinforced Semi-Flexible Solar Panel With A Durable Etfe Coating (German Solar Cells)

This high efficiency 80W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 80W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 3.10kg) which is great for all vehiclesHigh resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts.Sealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 0.9m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system, for linking several panels together or for connecting 4mm extension cable. Solar panel specifications: Peak power: 80W Maximum power voltage: 20.2V Maximum power current: 3.96A Open circuit voltage: 23.9V Short circuit current: 4.2A Power allowance range: +/- 5% Solar Panel Dimensions: 730 x 665 x 4 mm Junction Box Dimensions: 90 x 16 x 16 mm Weight: 3.10 kg 2 x 0.9m of high quality single core solar cable (4mm² cross section) Male and female MC4 connectors

...Read more View Product

£3,848.80

Clayton Power – LPS II 3000 – 2 kWh

Clayton Power LPS II 3000 - 2 kWh All-in-one Lithium Power Supply The powerful and compact LPS provides power to your 230 VAC and 12 VDC appliances without the complexities of additional equipment. 230 V/50 Hz output Peak: 5000 W Power: 3000 W 12 V output 60 Seconds: 350 A Continously: 180 A Built-in Li-Ion Battery Efficient energy: 2 kWh Capacity: 2160 Wh (160 A) Charging Alternator: 500 W / SC: 1000 W Solar panels: 400 W Mains: 750 W The Clayton LPS II – 3000KWh: Powering the Future with Unmatched Efficiency and Reliability In an era where energy efficiency, reliability, and sustainability are paramount, the Clayton LPS II – 3000KWh stands out as a beacon of innovation and power. Designed for the demanding needs of industries ranging from manufacturing to data centers, this cutting-edge energy storage solution is not just a product but a game-changer in the way businesses operate and manage their power needs. Unmatched Efficiency for Maximum Savings The Clayton LPS II – 3000KWh redefines energy efficiency with its advanced technology. Its state-of-the-art lithium polymer battery system ensures that you get more power out of every kilowatt-hour, significantly reducing waste and maximizing energy usage. This efficiency translates directly into cost savings, allowing businesses to invest more in growth and innovation. Reliability You Can Count On When it comes to power, reliability is non-negotiable. The Clayton LPS II – 3000KWh delivers unparalleled reliability, ensuring that your operations run smoothly 24/7. With its robust build and cutting-edge battery management system, it provides a consistent and stable power supply, minimizing the risk of downtime and keeping your business operational under all circumstances. Scalability for Growing Needs One of the most significant advantages of the Clayton LPS II – 3000KWh is its scalability. Whether you’re a small startup or a large corporation, this energy storage system can grow with your business. Its modular design allows for easy expansion, so you can add more units as your energy needs increase, ensuring that your power infrastructure keeps pace with your growth. Sustainability for a Greener Tomorrow In today’s world, sustainability is not just a buzzword but a business imperative. The Clayton LPS II – 3000KWh is designed with the planet in mind. Its high efficiency and lithium polymer technology reduce carbon emissions, helping your business contribute to a greener, more sustainable future. By choosing the Clayton LPS II, you’re not just powering your business; you’re powering a movement towards a cleaner, more sustainable world. A Smart Investment for the Future Investing in the Clayton LPS II – 3000KWh is an investment in the future. With its unparalleled efficiency, reliability, scalability, and commitment to sustainability, it’s more than just an energy storage system—it’s a strategic asset that will power your business today and in the years to come. Whether you’re looking to reduce costs, ensure uninterrupted operations, or make your business more sustainable, the Clayton LPS II – 3000KWh is the solution you’ve been waiting for. In Conclusion The Clayton LPS II – 3000KWh is not just a step forward in energy storage; it’s a leap into the future of power management. With its unmatched efficiency, reliability, scalability, and commitment to sustainability, it’s the perfect choice for businesses looking to power their operations more efficiently and sustainably. Join the ranks of forward-thinking companies that are already benefiting from the Clayton LPS II – 3000KWh and take your business to new heights of success and sustainability.

...Read more View Product

£117.99

20A 12V Dc To 12V Dc Automatic Multi-Stage Battery-To-Battery Charger With Solar Input For Lead Acid, Calcium Or Lithium-Ion Batteries

20A 12V Dc To 12V Dc Automatic Multi-Stage Battery-To-Battery Charger With Solar Input For Lead Acid, Calcium Or Lithium-Ion Batteries This powerful, high-quality battery to battery charger can charge a 12V battery from another 12V battery with its own power source, or from a solar panel using its built-in solar input, at up to 20A. The fully-automatic battery charger uses an intelligent, multi-stage charging program that can be set to a wide variety of battery types using easy, one-button programming and features a full suite of electronic protections. This system is ideal for caravans, campervans, motorhomes or boats, where the alternator charging can be shared between the starter and leisure batteries while the engine is running, then the leisure battery can be kept topped up from solar power while the vehicle is parked. By combining two chargers into one unit the set-up and operation are made simple, allowing you to easily share an existing charging source between two batteries or battery banks and utilise solar power to extend your off-grid runtime. Key Features: Powerful solar charge controller with overload protection: compatible with solar panel(s) up to 20A at 16-25V, automatically activates when there is no battery-to-battery charging. Fully-automatic, high-frequency, multi-stage charging: ensures the battery is charged safely and quickly. Pulsed charging keeps temperatures low and evens electrolyte consistency to ensure a long battery life. Easy battery type selection: with the push of a button, the unit can be switched between Lead Acid, AGM/Gel, Calcium, or Lithium-ion battery types. The unit remembers the battery type even without power, so there is no need to reprogram the unit if the battery supply is turned off. Safe unattended charging: the unit features inbuilt safety functions (protection against overload, overheating, overvoltage, over-discharge, short circuit, and reverse discharge of the battery), which allow the charger to be left permanently connected to the batteries for unattended automatic charging. Continued charging during battery/load use: the charger will continue to operate at full power whilst energy is drawn from the battery during use. The unit will maintain the charge if the battery is already at full capacity. Any 12V loads may also be left permanently connected and running whilst the DC-to-DC charger is in operation, and will be protected against overvoltage and voltage fluctuations. Ignition on/off control: by connection to the ignition control, this charger can be set to begin battery-to-battery charging immediately when vehicle ignition is turned on and stop charging when the vehicle is turned off. Deep discharge recovery: with a soft-start charging program and a minimum output battery voltage of only 2.5V, this charger is capable of recovering batteries from extremely high depth of discharge. Additional features: This charger also features LED indicators to show target battery charging stage, power source and selected battery type. Compatibility: This DC-to-DC battery charger is suitable for use with any 12V lead acid, AGM, Gel, Calcium or Lithium batteries. It is not compatible with 24V batteries or a combination of 12V and 24V batteries. Charger specifications: Battery input voltage: 12.5 - 16.0V Maximum charging current: 20A Solar input voltage: 16.0 - 25.0V Maximum solar input current: 20A Minimum output battery voltage: 2.5V Bulk charge voltage: 14.3V (AGM/Gel), 14.0V (Lead Acid), 15.0V (Calcium), 14.0V (Li-ion) Float charge voltage: 13.5V Float charge current: 100mA Battery capacity: 18 - 250Ah Dimensions (excluding cable): 21 x 13 x 4 cm Weight: 900g The product is covered by 1 year manufacturer warranty

...Read more View Product

£145.99

Maxxair - SkyMaxx Rooflight, 400x400mm, 23-60mm

Maxxair - SkyMaxx Rooflight, 400x400mm, 23-60mm SkyMaxx, the new rooflight range from Maxxair. The SkyMaxx range is suitable for new and replacement installs for 400 x 400mm and 500 x 700mm roof openings. Vented and non-vented options are available with interchangeable panels. The SkyMaxx Plus features integrated LED lighting KEY FEATURES Manual lift with 3 open positions Pleated screen and blind provide the option of full sun, full shade or partial shade/sun SkyMaxx fits 400 x 400mm roof opening SkyMaxx LX fits 500 x 700mm roof opening Forced and non-forced ventilation Optional LED lighting (12vDC, 2 amp) For 23mm to 60mm Roof thickness, no cutting or adapters required CE and R43 approval. ROHS compliant This product is 400x400mm 23-60mm roof thickness and is vented and non vented and with LED lighting.

...Read more View Product

£255.99

150W 12V/24V Waterproof Portable Folding Solar Panel Without Solar Charge Controller

150w Portable Solar Panel This high quality, waterproof 150W portable folding solar panel is designed to provide free power for charging 12V/24V batteries, for example in vehicles and boats (motorhome, caravan, camper, narrow boat, yacht etc) or any other system with a 12V/24V battery or battery bank. This is the ideal solution for experiencing the benefits of solar without the permanency of a mounted solar panel, as this panel can be folded and stored away when not in use.This High efficiency 150W (75W+75W) 12V/24V folding portable monocrystalline solar panel comes with:Adjustable aluminium stand, handle and latches5m solar cableStorage / protective case The portable solar panel has several important features which make it a truly unique, premium quality product:The solar panel is completely waterproof, so the unit can be used in all weather conditionsThe high efficiency (75W + 75W) monocrystalline solar panels are made of high quality German solar cellsThe storage bag is not just a dust cover – it includes a layer of foam for added protectionWe always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This folding solar panel is supplied without a solar charge controller, to offer the flexibility to choose the controller best suited to your application. You can use your existing solar charge controller with this panel or it can be paired with any of our solar charge controllers. We offer a wide range of controllers; with features including LCD displays, MPPT/ Dual Battery/ Buck-Boost capability, mobile app connectivity and more - providing you with increased control over your system. This folding panel also allows you to remotely mount a solar charge controller in a convenient location for easy monitoring and quick access. This folding panel can be easily connected to one or more similar folding panels if necessary. The entire system can then be connected through a larger solar charge controller to increase the energy yield. Please note this panel comes pre-wired for a 12V battery connection and will require re-wiring for 24V. Alternatively a buck boost solar charge controller can be used.The folding solar panel comes with 5m (bare ended) solar cable to connect the panel to your choice of solar charge controller. The design incorporates a stand which is easy to set up and adjust, while the handle and latches ensure ease of storage and portability. The storage case included with the panel is made with a layer of foam which provides protection for the glass and the frame, and prevents any accidental damage. In addition to this, the solar panels’ corners are protected by plastic shields, which reduce the risk of damage.Solar panel specifications:Peak power: 150WMaximum power voltage: 17.5VMaximum power current: 8.32A (2 x 4.16A)Open circuit voltage: 21.6VShort circuit current: 9.0A (2 x 4.5A)Power allowance: +/- 3%Dimensions: 51 x 101 x 7 cm (folded)Weight: 15kg Advantages of Portable Solar Portable solar panels have quickly become a popular option for those looking to harness the power of the sun while on the go. These panels offer a number of advantages over traditional, fixed solar panels, making them a great choice for a wide range of applications. First and foremost, the most obvious advantage of portable solar panels is their portability. They can easily be transported and set up wherever you need them, which makes them ideal for camping, RVing, boating, and other outdoor activities. This portability allows you to harness the power of the sun no matter where you are, providing you with reliable and sustainable power sources. Another major advantage of portable solar panels is that they are easy to install. Unlike traditional, fixed solar panels, which often require professional installation, portable solar panels can be set up by just about anyone. This makes them a great option for people who are on a tight budget, or who want to avoid the hassle of professional installation. In addition to being portable and easy to install, portable solar panels are also highly efficient. They use advanced technology to track the sun and optimize power output, which helps to ensure that they are producing as much power as possible. This efficiency means that even small portable solar panels can produce enough power to meet the needs of most portable devices, making them a great choice for powering laptops, tablets, and other electronic devices. Lastly, portable solar panels are also very cost-effective. They are often less expensive than traditional, fixed solar panels, which can make them an attractive option for people who are on a tight budget. Overall, portable solar panels are an excellent choice for anyone looking to harness the power of the sun while on the go. They are portable, easy to install, highly efficient, and cost-effective, making them a great choice for a wide range of applications. Whether you're camping in the wilderness, boating on the open water, or just looking for an alternative power source, portable solar panels are a great option to consider.

...Read more View Product

£37.29

Berker Anthracite Twin USB Charging Point (21238A)

12V Twin USB charging socket. Output voltage 5V. No data transmission possible. Black. Country of Manufacture Germany EAN/UPC 5019328012386 Shipping To Mainland UK Only Yes Manufacturer Berker Special Order Yes OEM Part Number 21238A

...Read more View Product

£1.97

Male 3/8" BSP - 12mm Stem Adaptor W4 31263

Male 3/8" BSP - 12mm Stem Adaptor W4 31263 Push-Fit Hose Connector.Stem Adaptor. Male 3/8" BSP - 12mmSupplied with instructions.Spec:Length: 43mmWidth: 26.5mm Click here to view all W4 Water Fittings

...Read more View Product

£24.99

Assorted Blade Fuses (50 Pieces)

Box of Assorted Blade Fuses This assorted box contains 50 units A variety of 8 sizes Used for the protection of high current circuits Product Quantity 20 Amp 6 30 Amp 7 40 Amp 6 50 Amp 7 60 Amp 6 70 Amp 6 80 Amp 6 100 Amp 6

...Read more View Product

£689.99

Iconica 3000W 24V Hybrid Off Grid Solar Inverter With 4000W MPPT, 60A Mains Charger (No Battery Required)

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica 3000W 24V hybrid inverter intelligently combines the functions of a 3000W pure sine wave inverter, 80A MPPT solar charge controller and a 60A smart battery charger in one single unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its hybrid capability, this innovative inverter features advanced communication functions including inbuilt Bluetooth, along with a menu full of highly customisable settings.This inverter features the rare and unique ability to power AC appliances without connection to a battery - directly from solar power.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts, and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 3000W 24V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 3000W of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. The inverter is able to take power from solar panels directly for its operation, even if the battery is not available.2. Inbuilt 80A MPPT Solar charge controller with high input voltage of up to 500V DC: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.3. Enhanced 60A Smart battery charger: Designed to enable safe, efficient and fast (up to 60A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. Inbuilt Bluetooth connectivity: The integrated Bluetooth function allows the inverter to be monitored remotely via the Watchpower mobile app - a free mobile app available for Android devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc.Additional intelligent features:The Iconica 3000W 24V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Load power without a battery: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. By powering loads using the energy directly supplied from the solar panels, this Iconica inverter offers a uniquely independent and versatile power system, free from batteries if preferred. Removing the need for batteries also increases the efficiency of the energy generated from the solar array by reducing the power losses that this transfer of energy would usually cause. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. For example, if 4000W of solar power is flowing into the inverter, 2000W can be used to run appliances whilst the remaining 2000W will be used for charging the battery bank. - Simplified installation: The exceptionally high solar input voltage of this inverter of up to 500V DC allows the solar panels to be connected in series in one single chain. This eliminates the need for complicated multiple string connections, blocking diodes and expensive thick cables.- Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated removable LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc. The LCD display is removable and can be positioned up to 20m away from the inverter for remote system monitoring (requires additional basic RJ45 connection cable – not included). - Advanced communication options: In addition to the integrated Bluetooth feature, this inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- USB On-the-Go function: The inverter is supplied with a USB drive which allows the user to facilitate upload/ download of system data.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- BMS connectivity: The inverter features a Battery Management System (BMS) port, offering the possibility to connect to an optional BMS.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components.The fan is also designed to be easily removed in order to simplify maintenance of the inverter.Compatibility:This hybrid inverter is suitable for 24V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.Please note that in order to enable the solar charging or direct operation of the loads from solar panels, your solar array must meet the minimum MPPT input voltage requirement of the inverter of 120V (several solar panels connected in series). Inverter specifications:Nominal battery voltage: 24VContinuous power output: 3000W/3000VA (220-240V AC)Surge power: 6000VAOutput frequency: 50HzOutput waveform: Pure sine waveMaximum solar input power: 4000WMaximum open circuit solar input voltage: 500V (open circuit)MPPT operating solar voltage: 120V - 450VMaximum solar charging current: 80AMaximum mains AC charging current: 60AMaximum combined charging current: 80APeak efficiency: 93%Solar / AC charger max efficiency: 98%Operating temperature: -10°C to 50°CSupplied with USB drive, PC connection cable and PC software CDSize: 44 x 30 x 11.5 cmWeight: 9 kg

...Read more View Product

£589.99

Iconica 3000W 24V Hybrid Off Grid Inverter With 60A Mppt And 60A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. This Iconica 3000W 24V hybrid inverter intelligently combines the functions of a 3000W 24V pure sine wave inverter, 60A MPPT solar charge controller and a 60A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 3000W 24V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, kitchen appliances, power tools, etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 60A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.3. Enhanced 60A Smart battery charger: Designed to enable safe and efficient and fast (up to 60A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.Additional intelligent features:This Iconica 3000W 24V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit or 3G connection kit (purchased separately). By connecting via either of these two methods, the user will unlock access to exclusive features such as SMS / email status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. The inbuilt fan is helps to maintain an optimal operational temperature.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 24V flooded and sealed GEL/AGM lead-acid battery banks with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.If you are unsure whether 3000W is enough for your appliances, please refer to the following table: Table of typical power consumption of domestic appliances.Inverter specifications:Nominal battery voltage: 24VContinuous power output: 3000W / 3000VASurge power: 6000VAOutput voltage: 230V ACOutput frequency: 50Hz /60 HzOutput waveform: Pure sine waveMaximum solar input power: 1500WMaximum open circuit solar input voltage: 145VMaximum solar charging current: 60AMPPT operating voltage range: 30V – 115VMaximum mains AC charging current: 60AMaximum combined charging current: 120APeak efficiency: 93%Operating temperature: -10C to 50CSupplied with a PC connection cable and PC software CDTerminals for mains power connectionSize: 44 x 30 x 10 cmWeight: 9.5 kg This product is covered by a 1 year manufacturer warranty

...Read more View Product

£320.99

185w Solar Kit with Dual Battery Output MPPT Solar Charge Controller

Camper Van Solar Panel Kit A dual-battery solar panel charging kit allows 2 separate batteries to be charged at the same time. Typically this is the leisure battery bank and the engine starter battery. A dual-battery solar panel charging kit allows you to leave your Motorhome/Campervan unattended for long periods without the worry of either your van's starter or leisure batteries going flat. Included in the kit: 1 x Victron 185w Rigid Solar Panel1 x 20 amp Dual Output Dual Battery Solar Charge Controller1 x Mount Set ( White Plastic, Black Plastic or Z Brackets)2 x 10mm Battery Cables with 40A Fuse and Ring Terminals - 3m LongPair Of 5M Single Core Extension Cable Leads with MC4 Connectors1 x Double entry roof gland (Black or White) Dual Battery Charging MPPT This advanced 20A 12V/24V dual battery solar controller uses advanced MPPT technology to charge two independent batteries or battery banks. The main battery is charged at high power, while a secondary battery is given a trickle charge of up to 1A. This makes it a perfect solar controller for a campervan, motorhome, boat or any other system with 2 batteries (e.g. engine and leisure battery). The main battery will be charged with a majority of the power, whilst the second battery will be trickle charged to keep it topped up and ready for use. Maximum Power Point Tracking (MPPT) Technology MPPT technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined solar input power allowed for this controller is 260W for a 12V battery system or 520W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel). Full Range of Protection Functions: This charge controller features a comprehensive set of electronic protection functions to prevent reverse current at night (from the battery back to the solar panel), over-charging, short circuit, reverse polarity and more. The solar controller case is water resistant to a rating of IP33 when installed, for protection against sprays of water at up to 60 degrees from vertical. Advanced Battery Compatibility: Unlike many other less advanced solar charge controllers, this model is 100% compatible with a broad range of battery types for the main battery, such as Gel, AGM, Lead-Acid Flooded, and Lithium (LiFePO4 or Li-NiCoMn) batteries. Advanced System Functionality: The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel, system voltage recognition based on secondary battery) Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for the solar panel and each battery), battery state of charge, and accumulated charging energy Easy to use buttons allow the user to manually select the battery type (sealed, flooded, gel or Lithium), change the temperature units, and reset the in-built counters (charging energy, min/max voltages) When not in use, the system automatically goes into a low power mode, reducing standby consumption when there is no solar power available, such as when the vehicle is parked in a garage Current limiting function (20A) allows the possibility of adding more solar panels to your solar system in the future Victron Energy Solar Panel 12V 185W Mono series 4a – SPM041851200 Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Brand Victron Energy Manufacturer Part Number SPM041851200 GTIN 8719076040361 Voltage 12V Nominal Power 185W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Dimensions L1485 x W668 x D30mm Weight 11Kg Warranty 5 Years Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£48.27

Victron Monocrystalline panel 40W-12V Mono 425x668x25mm series 4a SPM040401200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£91.93

Victron Battery protect 220A 12V/24V Battery Over Discharge Protector BPR000220400

This Victron 220A 12/24V automatic battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances. Features: Low voltage disconnect: when battery charge is low, the Battery Protect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health. Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs. Overvoltage disconnect: when battery voltage gets too high, the BatteryProtect disconnects the loads to protect them from damage. Automatic system recognition: the BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup. Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect. Remote switch and alarm connections: connect input and output relays to control the BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems. Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging. System Specifications: Nominal battery voltage: 12V / 24V Operating voltage range: 6 - 35V Maximum continuous current: 220A Peak current (30 seconds): 600A Current draw: <1.5mA active, <0.6mA during disconnect Alarm Relay: 50mA Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C) Dimensions: Dimensions: 62 x 123 x 120 mm Weight: 800g M8 terminals Battery Protect Advantages Automatic smart battery protectors offer protection for the discharging of your battery system, preserving your battery health and protecting appliances. Victron Energy offers a range of discharge protectors which are designed to protect a battery bank from over-discharge and extend its lifespan. The discharge protectors offer several advantages and functionality including: -Protecting the battery bank: The discharge protectors protect the battery bank from over-discharge by disconnecting the load when the battery's state of charge (SOC) reaches a certain level. This helps to extend the lifespan of the battery bank by preventing deep discharge cycles. Customizable settings : The discharge protectors have customizable settings, this allows you to set the SOC level at which the load will be disconnected, and also set the reconnection level, depending on your needs and the type of battery you are using. -Advanced monitoring and control: The discharge protectors can be connected to a network for remote monitoring and control, this allows you to monitor the status of the battery bank and adjust settings as needed. -Compatible with other victron energy product: The discharge protectors can work seamlessly with other Victron Energy products such as the Multiplus inverter/charger, and GX devices for advanced monitoring and control. -Easy installation : The discharge protectors are easy to install and they are compatible with different types of battery, you can use them with lead-acid, lithium-ion, and other types of battery. -Reliability: The discharge protectors are built with high-quality and durable components, which ensures reliable and long-lasting performance. Overall, Victron Energy discharge protectors are a useful addition to a battery bank and can help to extend its lifespan by preventing over-discharge. They are easy to install and customizable settings, compatible with different types of batteries, and allow advanced monitoring and control, which makes them suitable for a wide range of applications.

...Read more View Product

£169.99

Victron 1000A 12V/24V/48V Battery Monitoring Smartshunt With Bluetooth - SHU050210050

The Victron Smart Shunt is the perfect solution for monitoring and managing your battery system. With its advanced technology and user-friendly design, the Smart Shunt is a reliable and efficient way to ensure that your battery is always performing at its best. The Smart Shunt is designed to accurately measure the current flowing in and out of your battery and can be easily connected to any battery system. This allows you to monitor the state of your battery in real-time, and make sure that it is always charged and ready to go. In addition to its monitoring capabilities, the Smart Shunt also has a number of advanced features that make it even more useful. For example, it has an integrated Bluetooth module that allows you to connect to your smartphone or tablet, so you can access all of the data and settings from the Smart Shunt on your mobile device. The Smart Shunt also includes a built-in relay that can be used to control other devices, such as a generator or an inverter. This means that you can use the Smart Shunt to automatically start or stop other devices, depending on the state of your battery. Overall, the Victron Smart Shunt is a powerful and versatile tool that can help you better manage your battery system. Whether you're a professional or a hobbyist, the Smart Shunt is the perfect choice for anyone looking to improve the performance and reliability of their battery system. This Victron 1000A VS series SmartShunt uses a high-precision battery shunt designed to expertly measure vital charging and performance data for your batteries. This smart model features additional advanced functions such as Bluetooth communication ability, a secondary input for optional monitoring of an auxiliary battery bank, and an extremely low current draw from the battery bank (0.7Ah per month for a 12V system). Statistics such as battery voltage, charge / discharge current as energy flows in to and out of the battery, Amp Hours consumed, state of charge and time-to-go can be viewed and the settings can be programmed using the inbuilt Bluetooth via any Bluetooth-enabled mobile device, such as a smartphone or tablet. Battery data The SmartShunt measures the vital parameters relating to the battery condition and the energy it receives / provides, and transmits this information via Bluetooth, where it can be viewed by the user (and where some settings can be amended if necessary). This information includes: Battery voltage: Displayed for the main battery / battery bank, and also for an optional auxiliary battery which can be connected via the secondary input. Battery midpoint voltage monitoring: For battery banks constructed of several individual batteries, the SmartShunt is able to maintain balance by taking the voltage measurements from the midpoint within the bank, and if the voltage deviates from this point of balance, an alarm will be generated. For such battery banks, the voltage value is also displayed for the battery bank as a whole, and additionally, for the 'top section' and 'bottom section' (i.e. 1st half and 2nd half) of the battery bank. Battery state of charge: Indicated as a percentage value from 0-100%. Battery charging / discharging current and power: The current (A) and power (W) flowing out of the battery (load consumption) are displayed as negative values, while the current and power flowing into the battery are displayed as positive values. Battery temperature: The SmartShunt can be connected to an optional Victron battery temperature sensor (sold separately). This temperature measurement can be used to adjust available battery capacity as the temperature varies. An alarm will be activated when battery temperature falls outside of the safe range. Amp hours consumed: For example, if 12A is drawn from a fully charged battery during a period of 3 hours, the app will show -36.0Ah consumed by the battery. Time-to-go: The SmartShunt is able to estimate the approximate length of time that the battery will continue to support the current load, before the battery requires re-charging. An in-depth data log also records historical data to enable the user to evaluate usage patterns and determine overall battery health. This includes values such as the highest/ lowest recorded voltages (for the main battery and auxiliary battery), deepest recorded discharge, time since last full discharge, cumulative Amp hours drawn, time since last full charge, total energy charged/discharged and many more. Customisation The user can set high/low thresholds for battery voltage (either battery), battery state of charge (main battery) or the battery temperature (additional sensor required). If any of the above parameters fall outside of this specified range, the battery shunt will activate an alarm on the connected mobile app. Advanced communication This smart battery shunt features inbuilt Bluetooth, enabling the user to wirelessly connect their mobile device to the monitor. Then, using the Victron Connect App on a smartphone or tablet, you will unlock numerous possibilities for advanced programming and remote monitoring of your battery system. A wide range of features are made available, including real-time data transmission, as well as the option to amend battery storage information, program alarms, and set up or join an existing VE.Smart network. Alternatively, the VE Direct USB Cable can be used to establish a connection to a non-Bluetooth-enabled PC/laptop. The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops. Compatibility This SmartShunt is suitable for use with any 12V, 24V or 48V Lead Acid / Gel / AGM / Lithium battery or battery bank. The maximum admissible nominal current through the shunt is 1000A. Additional items The shunt is also supplied with 2 x 1.5m positive supply cables with a fuse to connect the battery shunt to up to two battery banks. If you are looking for different size Victron SmartShunts: Victron Energy SmartShunt 500A/50mV – SHU050150050 Victron 1000A 12V/24V/48V Battery Monitoring Smartshunt With Bluetooth - SHU050210050 Victron 2000A 12V/24V/48V Battery Monitoring Smartshunt With Bluetooth - SHU050220050 Datasheet Victron Smartshunt Datasheet Video

...Read more View Product

£37.58

Blue Sea 5117 Fuse A3T/Class T 225A

Extremely fast short-circuit response. 20,000 Ampere Interrupt Capacity (AIC)

...Read more View Product

£27.84

Alfatronix PVPro-AABFF Double USB A Charger - Front Fit

Input voltage range: 9-32Vdc Output voltage: 5.2Vdc +/- 0.2V Max Output Power: 3A Off load current (quiescent current): <2.5mA Power conversion efficiency: 90% Operating temperature: -25°C to +55°C Connections Input: 6.3mm push-in flat blade connectors Output: 2 x USB A Socket Output indicator: Blue LED output indication Mounting method: Frong Fit version; 30mm diameter hole, secured with hidden screws IP Rating: IP30 A & C Port USB Charging For 12V And 24VDC Applications The PowerVerter PVPro Range of USB chargers has been completely updated into the A & C Range, amalgamating all the great design concepts of USB charging into one simple range. Models are now available offering both USB A and C connections, including Single and Double A as well as Single C and a combined Dual A & C output version. As well as standard rear fit version, all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required. Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments. Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB C models offer higher current outputs for limited charge assistance on tablets and laptops. Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting. The Range All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals. Dimensionally the A and C Chargers are the same and are interchangeable with the ever-popular PVPro Range. Electronically the designs include reverse polarity protection and automatic short circuit protection, so in the event of tampering or compromise the unit will shut down, then restart again, once the fault has been removed. Warranty The PVPro A and C range of chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base guarantee.

...Read more View Product

£138.00

AMT12-2B 12V 2AMP Trickle Charger contains built in bluetooth

PART NUMBER : AMT12-2B The AMT12-2 has many names Trickle Charger, Battery Maintainer, Battery Saver, Reverse Charger, Top Up Charger, Battery Equaliser, Battery to Battery trickle charger and its purpose is to keep a Source / Vehicle Battery charged & protected from damage during prolonged periods of Vehicle, Boat & Motorhome inactivity or storage. The charger feeds a low current into the Source Battery to compensate for self discharge, alarm & tracker loads while ensuring the charge of the Auxiliary / Leisure Battery is maintained. In the ideal scenario a Solar Charger or Mains Charger is attached to an Auxiliary / Leisure Battery to protect it from damage during a period of inactivity . The Trickle Charger draws a small current off to maintain the Vehicle / Source Battery. The Trickle Charger also feeds charge from the Auxiliary Battery to the Vehicle Battery until they reach 11.5V and 11.7V respectively ensuring that both Batteries are kept as healthy as possible even if no Solar Charger or Main Charger is present. For Lithium batteries the voltage thresholds for this function are set at 1V so 11.5V and 12.5V are the minimum operating voltages . The unit has 8 User selected programmes and so is suitable for use with any Auxiliary Battery Charging System including a simple Voltage Sensing Relay and a Battery to Battery Charger. A ABB-007 bluetooth module allows the unit to be configured to specific user settings to cater for different battery types and specific user requirements . All that is required is to download the app from the Apple store or google play and make the desired settings changes It does not matter the Make or Type of Charger the AMT12-2 will Charge the Vehicle Battery from the Leisure Battery . The clever software means it is compatible with conventional Alternator Vehicles, the latest Stop / Start & Euro 5/6 & Regenerative Braking Technologies. The unit has a low current draw of less than 2mA on a 12V system & so presents a very small discharge load to the Vehicle & Leisure Battery. At 1Ahr drain every 20 days the unit has negligible effect on the Battery Capacity and should easily cover the winter storage period. When a charging source either a Mains Charger or a Solar Charger is connected to the Auxiliary / Leisure Battery the AMT12-2 Trickle Charger allows a maximum of 4A (Usually considerably less) to flow from the Leisure Battery to the Vehicle Battery thus ensuring the Leisure Battery is Charged first and the Vehicle Battery second. The AMT12-2 works with all types of Lead Acid Batteries & Lithium Batteries, The Status Led gives feedback on the Trickle Charger Operation , State of Charge of the Vehicle Battery and Auxiliary Battery Conditions. There is Ignition Override Switch Enable to allow the user to externally control the charging if for some reason they wish to override the automatic settings. The AMT12-2 Trickle Charger works on 12V & 24V Battery Systems, Automatically detecting whether it is connected to a 24V or 12V system. The AMT12-2B Trickle Charger contains in-built Bluetooth allowing the user to easily set the charging thresholds of the AMT to suit their specific application with an app on their android or apple phone. The app also allows the user to monitor the states of the vehicle and the auxiliary battery in real time. The compact potted plastic enclosure means the AMT12-2 is easily fitted next to the auxiliary battery charger and connected by 3 faston connections. The inbuilt fuse helps make the installation extremely quick and easy.

...Read more View Product

£92.27

Blue Sea 3000 BS3000 Switch Battery HD Series ON/OFF

HD-Series Heavy Duty On-Off Battery Switch BS3000 Blue Sea 3000 Switches a single battery to a single load group Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Accepts two 4/0 AWG (95mm²) battery cables

...Read more View Product

£3,797.99

Sprinter, Crafter , Boxer - Full Electrical Off-Grid Camper conversion kit.

Full Electrical Off-Grid Campervan conversion kit - Ideal for larger vans such as a Sprinter/Crafter/Boxers Victron & Fogstar - the perfect combination 370w of Victron Solar300ah Fogstar Drift Lithium Battery30amp Victron DC to DC Charging Kit3Kw Victron Multiplus II inverter charger This full electrical conversion kit is designed for the larger van conversion. The combination of the large 300ah Lithium battery, 370w of solar and the battery-to-battery charging system will give you all of the off-grid independence you need. This kit is perfect for those that want to run large home appliances and are looking to spend extended time in the van (long weekends, short holidays). The kit comes with monitoring via apps through Bluetooth. The large Multiplus-II inverter charger will power nearly all of your home appliances whilst off-grid and simultaneously charge your lithium battery whilst hooked-up enabling the use of just one set of 230v sockets within the vehicle. Our kits can be expanded or altered as required so if this kit doesn't achieve exactly what you are looking for give us a ring for a friendly chat. Our free Campervan and Motorhome Electrical & Solar Design Service will ensure the kit you receive is exactly what's required. Our Full Electrical & Solar Conversion Kit Contains: Victron 370W Monocrystalline Solar kit with SmartSolar 100/30 MPPT, Mounts, Cables Victron Energy MultiPlus-II 12V 3000VA 120A 32A – PMP122305010Drift 12V 300Ah LiFePO4 Leisure BatteryVictron Orion-Tr Smart 12V 30A Non Isolated DC-DC B2B Split Charge KitVictron Bluetooth VE.Bus Dongle Victron Energy Fuse holders for MEGA-fuses – CIP000100001Victron Energy - Battery switch ON/OFF 275A - VBS127010010Battery Cable 95mm 485 amp High Quality Extra Flex CableBattery Crimp Cable Lugs 8mm Hole for 95mm Cable (Sold in 1's)Mega FusesBlue Sea 5026 BS5026 Fuse Block ST Blade 12 CircuitsBattery Cable 10mm 70 amp High Quality Extra Flex CableFlush Mains Inlet Black or WhiteCaravan, Campervan Mains Consumer Unit RCCB + 2 MCBSmall 240v IP Rated Enclosure with 16amp Dual Pole MCB10m x 2.5mm² 3 Core Arctic Flex - BlueVictron Energy Busbars 250A 6P +Covers25m x 2.5mm twin core 12v cable for lighting, pumps etc • All Victron equipment comes with a 5-year manufacturer warranty • Fogstar batteries come with a 10-year manufacturer warranty • Wiring Diagrams and installation guides available after purchase • As much after-sales support as is required (email, phone, live chat) • All products are in stock and available for delivery within 2 working days

...Read more View Product

£289.00

Victron Energy Phoenix Smart IP43 230v mains Charger (1+1) 12V 30A - PSC123051085

Victron Energy Phoenix Smart IP43 Charger 12/30 (1+1) 12V 30A - PSC123051085 The Phoenix 1+1 model provides 3A to the starter-battery, the rest to the ‘Leisure’ bank. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone. Adaptive, intelligent, dynamic charge features – see the datasheet below.FeaturesBluetooth Smart enabledAny Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.Phoenix Smart (1+1): two outputs to charge 2 battery banksThe second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery.Automatic voltage compensationThe charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases. Please see the manual for details.Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storageThe Phoenix Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used.The right amount of charge: variable absorption timeWhen only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery will be fully charged.Preventing damage due to excessive gassing: the BatterySafe modeIf, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reachedLess maintenance and aging when the battery is not in use: the Storage ModeThe Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the Storage Mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.Also charges Li-ion (LiFePO₄) batteriesCharger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-ion BMS to the remote on-off port. Alternatively full control of voltage and current can be achieved with Bluetooth.Fully programmable charge algorithmThe charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface. Three preprogrammed algorithms can be selected with the mode button (see specifications).Remote on-offThe remote on/off consists of two terminals: Remote H and Remote L. A remote on/off switch or relay contact can be connected between H and L. Alternatively, terminal H can be pulled high, or terminal L can be pulled low. See manual for details.VE.Direct interfaceFor a wired data connection to a Color Control panel, PC or other devices. Please see the VictronConnect app under Downloads / Software on our website.Programmable relayCan be programmed using the VE.Direct interface or a Bluetooth enabled device to trip on an alarm or other events. Brand Victron Energy Manufacturer Part Number PSC123051085 gtin 8719076041900 Voltage 12V Charge Current 30A Input Voltage 230V Number of Outputs 1+1 Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 94% Bluetooth Enabled Yes Dimensions H180 x W249 x D100mm Weight 3.5Kg Country of Manufacture Malaysia Warranty 5 Years Victron IP43 Datasheet Victron IP 43 230v Charger Datasheet

...Read more View Product

£139.28

Victron Orion DC-DC Converter 12V In 24V Out. 20A

Remote on-off connectorThe remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by the engine run/stop switch (see manual).All models with adjustable output can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.All models with adjustable output can be paralleled to increase output currentUp to five units can be connected in parallel.Easy to installDelivery includes four Insulated Fastons Female Crimp 6.3mm (eight Fastons in case of the Orion 24/12-40).Low power models: please see Orion-Tr series GTIN 8719080000000 Cont. Output Current 20A Efficiency 0.93 Bluetooth Enabled No Protection Category IP20 Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£135.99

Victron Energy Orion 24/12-70A DC-DC Converter IP20 – ORI241270020

Victron Energy Orion 24/12-70A DC-DC Converter IP20 – ORI241270020 Remote on-off connector The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by the engine run/stop switch (see manual). All models with adjustable output can also be used as a battery charger For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system. All models with adjustable output can be paralleled to increase output current Up to five units can be connected in parallel. Easy to install Delivery includes four Insulated Fastons Female Crimp 6.3mm (eight Fastons in case of the Orion 24/12-40).

...Read more View Product

£311.46

Victron Energy AGM Super Cycle Battery 12V 125Ah (M8) – BAT412112081

The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches. VRLA AGM: design life 7-10 years Features A truly innovative battery The AGM Super Cycle batteries are the result of recent battery electrochemistry developments. The paste of the positive plates is less sensitive to softening, even in case of repeated 100% discharge of the battery, and new additives to the electrolyte reduce sulfation in case of deep discharge. Exceptional 100% depth of discharge (DoD) performance Tests have shown that the Super Cycle battery does withstand at least three hundred 100% DoD cycles. The tests consist of a daily discharge to 10,8V with I = 0,2C20, followed by approximately two hours rest in discharged condition, and then a recharge with I = 0,2C20. The two hours rest period in discharged condition will damage most batteries within 100 cycles, but not the Super Cycle battery. We recommend the Super Cycle battery for applications where an occasional discharge to 100% DoD, or frequent discharge to 60- 80% DoD is expected. Smaller and lighter An additional advantage of the new chemistry is a slightly smaller size and less weight compared to our standard deep cycle AGM batteries. Low internal resistance The internal resistance is also slightly lower compared to our standard deep cycle AGM batteries Brand Victron Energy Manufacturer Part Number BAT412112081 GTIN 8719076041832 Voltage 12V Battery Capacity (C20) 125Ah Cold Cranking 550CCA Terminal Type M8 Insert Terminal Layout Left Hand Positive Dimensions (Including Terminals) L330 x W171 x H214mm Weight 33Kg Warranty 2 Years Country of Manufacture China Battery Technology AGM

...Read more View Product

£5.99

Anderson Connectors x 2 (Pair)

Anderson Connectors x 2 (Pair) The industry-leading Anderson Power Products SB connectors are ideal for quick and easy connection and disconnection of high current cables in applications such as battery charging, jump starting, welding etc. The connectors are genderless so both sides of the connection are identical. Simply turn one of the connectors upside down and slide them together. SB50 connectors are the smallest in the range and suitable for currents of up to 120A (in accordance with UL 1977 test specification).

...Read more View Product

£1,180.00

Victron Energy EasySolar-II 24V 3000VA 70A 32A MPPT 250/70 GX – PMP242307010

Available on back-order Delivery: 7-10 days The EasySolar-II GX combines an MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure. The product is easy to install, with a minimum of wiring. Features The all-in-one solar power solution The Victron EasySolar-II GX integrates the following elements: A MultiPlus-II inverter/charger A SmartSolar MPPT -Tr solar charge controller A GX device with a 2 x 16-character display. These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. In addition, Wi-Fi can be used to set up the system and to change settings. Solar charge controller The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger. The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT. GX device The integrated GX device includes: A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port. A USB port An Ethernet port A VE.Direct port The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection. Brand Victron Energy Manufacturer Part Number PMP242307010 GTIN 8719076049265 Voltage 24V Cont. Output Power at 25°C 3000VA Peak Power 5500W Output AC Voltage 230V Transfer Switch 32A Max. AC Input Current 32A Max. Battery Charge Current 70A Protection Category IP21 Efficiency 94% Bluetooth Compatible Yes Dimensions H499 x W268 x D237mm Weight 26Kg Warranty 5 Years

...Read more View Product

£855.99

380W Mono Solar panel kit with SmartSolar MPPT, AGM Batteries & Accessories

380W Victron Energy Solar Panel Kit with 200ah AGM Batteries and all Accessories Panel sizes are 1485x668x30mm This large 380w Rigid Solar Panel Kit with 190ah AGM Batteries and all accessories is designed for off-grid, campervans, motorhomes, and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and battery charging efficiency. The ETFE covering makes the solar panel extremely durable and resistant. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit Including: Victron 190W Monocrystalline panels x 2Plastic corner fixing brackets x2 or Aluminium Z Brackets x 8Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/20 MPPT5m of Black PV Cable & MC4 Connectors x2Resettable Circuit Breaker 50ampFused Battery Cable100ah AGM Battery x 2Victron Battery Isolator Switch25mm Battery cable 2m (Red & Black) x 2 This highly efficient Victron solar 370w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging of the battery. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£35.19

Sterling Split Charge Diode - 70A 1 in 2 out

Sterling has developed a range of low cost split charge diodes. These diodes have enhanced performance over conventional diodes and at a lower cost. The difference is in the devices. All other split charge diode manufacturers use conventional alternator diodes, which at low current flow have about a 0.93 voltage drop. When the full rated current of these diodes is approached, the voltage drop increases to about 0.95 volts. Specification: Alt Input: 1 Battery Banks: 2 Output: 70A For cable information for all Sterling Products click here

...Read more View Product

£242.99

Rolls Series 5 S12-116 AGM Deep Cycle Battery

Deep cycle refers to applications that typically discharge 60-80% of the battery capacity. The Rolls S Series S12-116 AGM Deep Cycle AGM battery features thick plates with a high density active material. This design allows for reserve energy to be stored deep within the battery plates and released during slow discharge. The Rolls AGM range are sealed, non hazardous and completely maintenance free and?will suit the customer looking for a long reliable, maintenance free service life. Rolls has designed a Deep Cycle VRLA battery with high reserve capacity, long cycle life and low internal resistance, while achieving superior cranking performance. Rolls AGM batteries are the smart choice for demanding renewable applications.They are designed and built differently than standard batteries. They use more lead, heavier plates and other proprietary materials that enable them to deliver more power and capacity over many life cycles. Specifications Weight 30 kg 66 lbs Length 30.7 cm 12.09" Width 16.9 cm 6.65" Height Inc. Term. 23.7 cm 9.33" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Rope / Plastic Handle Series AGM-S Warranty See Warranty Terms Volts 12 BCI Grp 27 Cells 6 Terminal Type DT Included Hardware Stainless Steel Nuts & Bolts Size & Thread DT Charge Charge Voltage Range 14.7V @ 25°C (77°F) Float Voltage Range 13.8V @ 25°C (77°F) Recommended Charge Current 20 A Maximum Charge Current 35 A Self-Discharge Rate Less than 2% per month at 25°C (77°F) Internal Resistance 4 mΩ Capacity Cold Crank Amps (CCA) 0°F / -18°C 680 Marine Crank Amps (MCA) 32°F / 0°C 900 Reserve Capacity (RC @ 25A) 180 Minutes Reserve Capacity (RC @ 75A) 43 Minutes Capacity Affect by Temperature 40°C(104°F) 25°C(77°F) 0°C(32°F) -15°C(5°F) 102% 100% 85% 65% Hour Rate Capacity / AMP Hour Current / AMPs @ 100 Hour Rate 116 AH 1.16 A @ 20 Hour Rate 105 AH 5.25 A @ 10 Hour Rate 95 AH 9.5 A @ 5 Hour Rate 86 AH 17.2 A Cut Off Voltage Constant Current Discharge VPC 1 hr 2 hr 3 hr 5 hr 8 hr 10 hr 59.6 31.6 23.7 17.2 11.4 9.5 View all Rolls Batteries

...Read more View Product

£180.99

Victron Energy Blue Smart IP22 Charger 24V 16A 1 Output – BPC241647022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC241647002 GTIN 8719076052470 Voltage 24V Charge Current 16A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£79.99

High Efficiency 10A Dual Battery Mppt Solar Charge Controller With Lcd Display For Solar Panels Up To 130W (12V Battery System) / 260W (24V Battery System)

Dual Battery ChargingThis advanced 10A 12V/24V dual battery solar controller uses advanced MPPT technology to charge two independent batteries or battery banks. The main battery is charged at high power, while a secondary battery is given a trickle charge of up to 1A. This makes it a perfect solar controller for a campervan, motorhome, boat or any other system with 2 batteries (e.g. engine and leisure battery). The main battery will be charged with a majority of the power, whilst the second battery will be trickle charged to keep it topped up and ready for use.Maximum Power Point Tracking (MPPT) TechnologyMPPT technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 60V. The maximum combined solar input power allowed for this controller is 130W for a 12V battery system or 260W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full Range of Protection Functions:This charge controller features a comprehensive set of electronic protection functions to prevent reverse current at night (from the battery back to the solar panel), over-charging, short circuit, reverse polarity and more. The solar controller case is water resistant to a rating of IP33 when installed, for protection against sprays of water at up to 60 degrees from vertical.Advanced Battery Compatibility:Unlike many other less advanced solar charge controllers, this model is 100% compatible with a broad range of battery types for the main battery, such as Gel, AGM, Lead-Acid Flooded, and Lithium (LiFePO4 or Li-NiCoMn) batteries.Advanced System Functionality:• The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel, system voltage recognition based on secondary battery)• Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for the solar panel and each battery), battery state of charge, and accumulated charging energy• Easy to use buttons allow the user to manually select the battery type (sealed, flooded, gel or Lithium), change the temperature units, and reset the in-built counters (charging energy, min/max voltages)• When not in use, the system automatically goes into a low power mode, reducing standby consumption when there is no solar power available, such as when the vehicle is parked in a garage• Current limiting function (10A) allows the possibility of adding more solar panels to your solar system in the future This model is also compatible with a remote meter MT11 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings from an easy to use and install remote screen.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely. This allows the system to optimise the charging process for lead acid batteries or provide low temperature protection for lithium batteries. Controller specifications: The most advanced MPPT technology to ensure high efficiency (>95%) of your solar system Fully automated operation and auto 12/24V selection 3 pairs of terminals (solar panel, battery 1, battery 2) for wires up to 4mm2 Maximum solar panel voltage 60V Maximum solar panel power 130W (12V) / 260W (24V) Temperature sensor for automatic compensation (-3mV/°C/2V) Comprehensive electronic protection features Communication port: RS485 interface Grounding: negative common ground Current limiting function (10A) Self-consumption: <12mA Working temperature: -30°C to +80°C Size: 227.2 x 143 x 58.1 mm Mounting dimensions: 160 x 134 mm Weight: 0.8 kg Multiple mounting holes (5mm diameter) for ease of installation

...Read more View Product

£117.69

Victron Smart Batteryprotect 220A 12V/24V Battery Over Discharge Protector BPR122022000 (Bluetooth )

This Victron 220A 12/24V automatic smart battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances. Features: Low voltage disconnect: when battery charge is low, the Smart BatteryProtect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health. Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs. Overvoltage disconnect: when battery voltage gets too high, the Smart Battery Protect disconnects the loads to protect them from damage. Bluetooth connectivity: connect your smartphone for easy programming of the voltage settings. Automatic system recognition: the Smart BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup. Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect. Remote switch and alarm connections: connect input and output relays to control the Smart BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems. Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging. System Specifications: Nominal battery voltage: 12V / 24V Operating voltage range: 6 - 35V Maximum continuous current: 220A Peak current (30 seconds): 600A Current draw: <1.5mA active, <0.6mA during disconnect Alarm Relay: 50mA Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C) Dimensions: Dimensions: 62 x 123 x 120 mm Weight: 800g M8 terminals Battery Protect Advantages Automatic smart battery protectors offer protection for the discharging of your battery system, preserving your battery health and protecting appliances. Victron Energy offers a range of discharge protectors which are designed to protect a battery bank from over-discharge and extend its lifespan. The discharge protectors offer several advantages and functionality including: -Protecting the battery bank: The discharge protectors protect the battery bank from over-discharge by disconnecting the load when the battery's state of charge (SOC) reaches a certain level. This helps to extend the lifespan of the battery bank by preventing deep discharge cycles. Customizable settings : The discharge protectors have customizable settings, this allows you to set the SOC level at which the load will be disconnected, and also set the reconnection level, depending on your needs and the type of battery you are using. -Advanced monitoring and control: The discharge protectors can be connected to a network for remote monitoring and control, this allows you to monitor the status of the battery bank and adjust settings as needed. -Compatible with other victron energy product: The discharge protectors can work seamlessly with other Victron Energy products such as the Multiplus inverter/charger, and GX devices for advanced monitoring and control. -Easy installation : The discharge protectors are easy to install and they are compatible with different types of battery, you can use them with lead-acid, lithium-ion, and other types of battery. -Reliability: The discharge protectors are built with high-quality and durable components, which ensures reliable and long-lasting performance. Overall, Victron Energy discharge protectors are a useful addition to a battery bank and can help to extend its lifespan by preventing over-discharge. They are easy to install and customizable settings, compatible with different types of batteries, and allow advanced monitoring and control, which makes them suitable for a wide range of applications.

...Read more View Product

£55.94

Victron Battery protect 100A 12V/24V Battery Over Discharge Protector BPR000100400

This Victron 100A 12/24V automatic battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances. Features: Low voltage disconnect: when battery charge is low, the Battery Protect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health. Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs. Overvoltage disconnect: when battery voltage gets too high, the BatteryProtect disconnects the loads to protect them from damage. Automatic system recognition: the BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup. Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect. Remote switch and alarm connections: connect input and output relays to control the BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems. Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging. System Specifications: Nominal battery voltage: 12V / 24V Operating voltage range: 6 - 35V Maximum continuous current: 100A Peak current (30 seconds): 600A Current draw: <1.5mA active, <0.6mA during disconnect Alarm Relay: 50mA Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C) Dimensions: Dimensions: 59 x 42 x 115 mm Weight: 500g M8 terminals Battery Protect Advantages Automatic smart battery protectors offer protection for the discharging of your battery system, preserving your battery health and protecting appliances. Victron Energy offers a range of discharge protectors which are designed to protect a battery bank from over-discharge and extend its lifespan. The discharge protectors offer several advantages and functionality including: -Protecting the battery bank: The discharge protectors protect the battery bank from over-discharge by disconnecting the load when the battery's state of charge (SOC) reaches a certain level. This helps to extend the lifespan of the battery bank by preventing deep discharge cycles. Customizable settings : The discharge protectors have customizable settings, this allows you to set the SOC level at which the load will be disconnected, and also set the reconnection level, depending on your needs and the type of battery you are using. -Advanced monitoring and control: The discharge protectors can be connected to a network for remote monitoring and control, this allows you to monitor the status of the battery bank and adjust settings as needed. -Compatible with other victron energy product: The discharge protectors can work seamlessly with other Victron Energy products such as the Multiplus inverter/charger, and GX devices for advanced monitoring and control. -Easy installation : The discharge protectors are easy to install and they are compatible with different types of battery, you can use them with lead-acid, lithium-ion, and other types of battery. -Reliability: The discharge protectors are built with high-quality and durable components, which ensures reliable and long-lasting performance. Overall, Victron Energy discharge protectors are a useful addition to a battery bank and can help to extend its lifespan by preventing over-discharge. They are easy to install and customizable settings, compatible with different types of batteries, and allow advanced monitoring and control, which makes them suitable for a wide range of applications.

...Read more View Product

£159.00

100W 12V Solar Panel With 5M Cable (German Solar Cells)

We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This high efficiency, waterproof 100W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system or 4mm extension cable. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller.The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.If you are planning to use this solar panel to charge a 12V battery or battery bank: please note this panel requires a solar charge controller / regulator to charge a 12V battery. To view the full range of solar charge controllers we offer, please visit the Solar Charge Controllers category of our online shop. Solar panel specifications: Peak power: 100W Maximum power voltage: 20.2V Maximum power current: 4.95A Open circuit voltage: 23.9V Short circuit current: 5.26A Power allowance range: +/- 3% Dimensions: 845 x 670 x 30mm Weight: 7kg 4 mounting holes 9 x 11 mm 2 x 5m of high quality single core solar cable 4.0mm cross section Male and female MC4 connectors

...Read more View Product

£165.99

60W 12V Waterproof Portable Folding Solar Charging Kit For Motorhome, Caravan, Boat

60w Portable Solar Panel This complete 60W 12V folding portable solar charging kit includes:High efficiency 30W + 30W folding monocrystalline solar panelsAdvanced fully automated 10A solar charge controller with enhanced protection functionsAdjustable aluminium stand, handle and latches5m cable with a battery plug and a fuseBattery crocodile clips for ease of connectionStorage / protective caseInstallation manual This portable solar kit has several important features which make it a truly unique premium quality product:It is completely waterproof, including the solar charge controller fitted on the back (genuine IP67-waterproof solar controller), which means it is suitable for all weather conditionsThe high efficiency 30W + 30W folding monocrystalline solar panels are made of high quality German solar cellsThe protective bag is not just a dust cover - it's a sturdy protective case made with a layer of foam which prevents accidental damage to the frame and glassThe advanced fully automated 10A solar charge controller provides complete overcharge protection and supports several battery types with different charging parameters for maximum efficiency (sealed, gel, flooded batteries) We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This high quality, waterproof 60W portable folding solar kit is designed to provide free power for charging 12V batteries, for example in vehicles and boats (motorhome, caravan, camper, narrow boat, yacht etc) or any other systems with a 12V battery or battery bank. It comes with everything required for battery charging: an advanced 10A 12V solar charge controller, and 5m cable with a battery plug, fuse and crocodile clips. You can start using the kit immediately - simply connect it to your battery and find a well-lit area for the folding solar panels.The kit comes with a stand which is very easy to set up and adjust. A handle and latches ensure ease of storage and portability. The storage case included with the kit is made with a layer of foam, which will completely protect the glass and the frame and prevent any accidental damages. In addition, the corners of solar panels are protected by plastic which reduces the risk of damage and adds to the aesthetically pleasing design.The 10A waterproof solar charge controller included with the kit will protect your battery from over-charging (it controls the state of charge of your battery every second). The controller has many other protection functions, such as stopping reverse current at night (from the battery back to the solar panel), incorrect polarity and short circuit protection. Controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. PWM technology can also recover some lost battery capacity.In addition, the solar charge controller has a very high degree of water protection - IP67 (which means it's completely sealed), so it is absolutely safe to use this solar kit in all weather conditions.This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings. Requires a RS485 to RJ45 cable to extend from controller to the remote meter.2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users). Requires an RS485 to RJ45 cable to extend from controller to the Wi-Fi module.3) An RS485 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.The kit is suitable for sealed, gel and flooded 12V batteries: the solar charge controller allows battery type selection for maximum efficiency of charging.Solar panel specifications:Peak power: 60WMaximum power voltage: 17.5VMaximum power current: 3.4A (2 x 1.7A)Open circuit voltage: 21.6VShort circuit current: 3.6A (2 x 1.8A)Power allowance: +/- 3%Dimensions: 35 x 65 x 6cm (folded)Weight: 7.5kg Advantages of Portable Solar Portable solar panels have quickly become a popular option for those looking to harness the power of the sun while on the go. These panels offer a number of advantages over traditional, fixed solar panels, making them a great choice for a wide range of applications. First and foremost, the most obvious advantage of portable solar panels is their portability. They can easily be transported and set up wherever you need them, which makes them ideal for camping, RVing, boating, and other outdoor activities. This portability allows you to harness the power of the sun no matter where you are, providing you with reliable and sustainable power sources. Another major advantage of portable solar panels is that they are easy to install. Unlike traditional, fixed solar panels, which often require professional installation, portable solar panels can be set up by just about anyone. This makes them a great option for people who are on a tight budget, or who want to avoid the hassle of professional installation. In addition to being portable and easy to install, portable solar panels are also highly efficient. They use advanced technology to track the sun and optimize power output, which helps to ensure that they are producing as much power as possible. This efficiency means that even small portable solar panels can produce enough power to meet the needs of most portable devices, making them a great choice for powering laptops, tablets, and other electronic devices. Lastly, portable solar panels are also very cost-effective. They are often less expensive than traditional, fixed solar panels, which can make them an attractive option for people who are on a tight budget. Overall, portable solar panels are an excellent choice for anyone looking to harness the power of the sun while on the go. They are portable, easy to install, highly efficient, and cost-effective, making them a great choice for a wide range of applications. Whether you're camping in the wilderness, boating on the open water, or just looking for an alternative power source, portable solar panels are a great option to consider.

...Read more View Product

£860.00

Victron Energy MultiPlus 12v Inverter Charger Compact 12/2000/80-30 VE.Bus – CMP122200000

Victron Energy MultiPlus 12v Inverter Charger Compact 12/2000/80-30 VE.Bus – CMP122200000 The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Brand Victron Energy Manufacturer Part Number CMP122200000 Voltage 12 Transfer Switch (A) 30 Cont. Output Power at 25°C (VA) 2000 Peak Power (W) 3500 Max Efficiency 93% Zero Load Power (W) 9 Charge Current House Battery (A) 80 Charge Current Starter Battery (A) 4 Battery Temperature Sensor Yes Programmable Relay Yes Remote on-off Yes Protection Category IP21 Dimensions H520 x W255 x D125mm Weight (kg) 12 Warranty 5 Years Country of Manufacture India

...Read more View Product

£389.99

200W Black Semi-Flexible Fiberglass Solar Panel with Durable ETFE Coating

200W Black Semi-Flexible Fiberglass Solar Panel with Durable ETFE Coating - 3 Year Warranty At Van Junkies we love high-quality solar products. That's why we have developed this highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This high-efficiency 200W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and backup solar power systems. The panel can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Specially textured surface significantly reduces light reflection and improves performance in low-light and cloudy conditions The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) Black backing makes the solar panel ideal for discreet and aesthetically pleasing installation on dark-coloured roofs, vehicles or mounting surfaces The panel is incredibly light (only 3.65kg) and very thin (just 2mm) which is great for all vehicles High resistance to saltwater environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High quality 9-busbar solar cells: This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. All-black design: This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark-coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (6mm² cross-section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 200W Maximum power voltage: 17.6V Maximum power current: 11.36A Open circuit voltage: 20.8V Short circuit current: 12.05A Dimensions: 1420 x 710 x 2 mm Weight: 3.65 kg

...Read more View Product

£744.00

330W Pro Semi-Flexible Solar Panel with 5-Year Warranty

Now with a 5 year warranty! This high efficiency, waterproof 330W semi-flexible solar panel is the largest semi-flexible solar panel available on the UK market. It is perfect for permanent outdoor use to provide free electricity for charging 12V or 24V batteries to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners or even zipping.Product features:Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditionsRobust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel that can be walked onIncredibly light (only 6.82kg) and very thin (just 2mm) which is great for motorhome and caravan roofsHigh resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified. The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter).The fibreglass plastic used in this solar panel is very strong and durable. When the solar panel is mounted on to a rigid surface, it is possible to walk on the solar panel in soft shoes (to prevent accidental scratches), which makes it the perfect choice for mounting on a boat deck. The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 connectors which can be used for easy connectivity to your existing system, linking several panels together or for connecting 4mm extension cable. Solar panel specifications: Peak power: 330W Maximum power voltage: 39.1V Maximum power current: 8A Open circuit voltage: 47.7V Short circuit current: 9.0A Dimensions: 1917 x 1020 x 2 mm Weight: 6.82 kg

...Read more View Product

£549.99

530W MCS certified semi-flexible solar panel top junction box

The FMCS-530M is a cutting-edge 530W MCS-certified semi-flexible monocrystalline solar panel that redefines efficiency and adaptability. Built with 182mm silicon wafers, PERC technology, and half-cut cells, this panel maximises power output while reducing energy losses. Its innovative design ensures exceptional durability, lightweight construction, and superior performance, even in challenging conditions. Perfect for curved rooftops, weak load-bearing surfaces, and corrugated metal roofs, the FMCS-530M is the ideal solution for residential, commercial, and industrial solar applications. Advanced energy efficiency With an advanced combination of PERC and half-cut cell technology, the FMCS-530M achieves superior energy conversion efficiency, ensuring maximum power output from every module. By minimising adaptive losses, this panel optimises energy generation, making it a high-performance choice for solar installations in various environments. Exceptional power-to-weight ratio & versatile installation Designed for ease of installation and adaptability, the FMCS-530M is exceptionally lightweight at just 4.1kg per unit area, making it 70% lighter than conventional solar panels. Despite its ultra-lightweight construction, it delivers an impressive 200W per square meter of installation area, making it ideal for surfaces with low load-bearing capacity, such as corrugated metal roofs, coal sheds, and curved rooftops. Enhanced performance in shaded conditions with integrated junction box diodes The FMCS-530M features a junction box equipped with three bypass diodes, ensuring optimal performance and reliability in various conditions. The integrated diodes mitigate the risk of hot spots caused by shaded or damaged cells, protecting the panel from potential long-term damage. By allowing the panel to continue generating electricity efficiently, even when partially shaded, the diodes enhance total energy production. In scenarios where only a portion of the panel is shaded, the bypass diodes help maintain consistent power flow, preventing significant energy loss. By reducing thermal stress and preventing excessive heat build-up, the diodes contribute to extending the overall durability and lifespan of the panel. When connected in series, the bypass diodes ensure that shading on one panel does not significantly impact the performance of the entire solar array. Built for extreme durability MCS certification guarantees that this solar panel is designed for durability. It has undergone rigorous weather testing and is built to withstand harsh environmental conditions. The panel is resistant to sand, dust, acid, alkali, and salt mist corrosion, making it suitable for installations in extreme climates. Additionally, its anti-PID (Potential Induced Degradation) and hail shock resistance further enhance its longevity and reliability. Long-term reliability & warranty protection For long-term peace of mind, the FMCS-530M comes with a 5-year quality and performance guarantee for vehicle/boat installations and 10-year for roof installations, along with a 25-year linear power output warranty, ensuring reliable and efficient energy generation for decades. The FMCS-530M semi-flexible solar panel is the perfect combination of innovation and efficiency, offering superior performance in any environment. Whether for residential, commercial, or industrial applications, this high-efficiency panel provides a reliable, sustainable energy solution for years to come. Solar panel specifications: Peak power: 530W Maximum power voltage: 41.35V Maximum power current: 12.83A Open circuit voltage: 49.90V Short circuit current: 13.76A Protection: IP68 Dimensions: 2312 x 1137 x 3.4 mm Weight: 10.5 kg 2 x 0.3m of 4.0m² solar cable attached This product is covered by a 5 year workmanship warranty for vehicle/boat installations and a 10 year warranty for roof installations

...Read more View Product

£556.99

200w Slimedge Lightweight Solar Panel Kit with Victron SmartSolar MPPT 75/15

200w Slimedge Lightweight Solar Panel Kit with Victron SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs) 10 YEAR PANEL WARRANTY! This 200w Lightweight Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 200w Ultra Lightweight Rigid Black Solar Panel 1513 x 807 x 12 mm Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive 1 x MPPT to Battery Cable set with In-Line Fuse 10 year warranty on the Solar Panel 5 year warranty on Victron MPPT Scanstrut Roof Gland - Black Panel Specifications Peak power: 200W Open circuit voltage: 28.5V Dimensions: 1513mm x 807mm x 12 mm Weight: 3.65 kg SlimEdge panels are a gamechanger, they come with all the benefits of a rigid panel and the lightweight construction of a flexible panel, making them perfect for pop tops. Shingled Monocrystalline Cells - Convert more sunlight into electricity, with a design that maximises surface area - perfect for tight spaces like caravans and campers. Discreet Inbuilt Fixing Brackets - Quick, easy installation with a sleek, low-profile design. It also helps reduce vehicle height for a cleaner, more aerodynamic look. Up to 50% Lighter Than Traditional Rigid Panels - Improved Fuel Economy - Lighter weight helps reduce fuel costs. Sturdy Anodised Aluminium Frame - Sleek, Modern Appearance: Adds a stylish edge to your setup. Durability & Corrosion Resistance: Built to withstand even the toughest outdoor conditions. Easy Installation: A rigid frame ensures the panel is easy to mount with no flexing. 10-Year Panel Warranty - Enjoy peace of mind knowing your panel is protected against premature failure, and offers long-lasting reliability.

...Read more View Product

£44.94

Scanstrut SC-USB-F1 Flip Pro Charger for USB-A and USB-C (12V / 24V)

Scanstrut SC-USB-F1 Ultra-fast USB charging for the next generation boater. Flip Pro is designed for use with either a 12V or 24V input and features 1x USB-A and 1x USB-C charging port. This provides the optimum choice of connection for any device and the fastest charging for your device onboard. When not in use, the spring-loaded cap remains tightly closed, protecting the ports from the elements. When charging, it quickly locks open to protect your cables when plugged in. Featuring a super-compact footprint, Flip Pro is constructed from premium, marine-grade materials and is IPX4 waterproof, making it completely washdown-ready. Flip Pro is FAST! It will charge at up to 36W on a 12V system or up to 60W on a 24V system. This makes it perfect for charging modern laptops via the USB-C port. It’s also 2x faster for charging large tablets and is designed to effortlessly charge both an iPad Pro & iPhone at the same time. USB C output: 36W max on 12V system & 60W max on 24V system USB A output: 36W max The install cut-out matches those of standard USB sockets for easy retrofit or swap of an existing USB charger, allowing you to keep up with the heavier power draws of modern electronic devices. Universal • Universal fit for any USB-A or USB-C connectors. • Fast charge (60W max) up to 2 devices at a time. • Easy Install, using standard USB mounting hole - 29mm (1-1/8") Washdown Proof: IPX4 waterproof with the cover closed. Marine Ready • Internal anti-corrosion protective coating • UV resistant • 316 stainless hinge and spring Electrical Information Input voltage: 10-30V DC (12/24V System) Input current Max: 6A (10A fuse recommended) Standby power draw: 0.01W Important information The charge cable supplied with your device (tablet, phone, action camera, etc) must be used to achieve maximum charge performance from this charger. Phones will charge at the same speed whether on a 12V or 24V input voltage system. However, a 24V system must be used to get the full 60W output suitable for fast charging laptops. Technical info: Output Type C (12V): 5V⎓3A, 9V⎓3A, 12V⎓3A Max Output Type C (24V): 5V⎓3A, 9V⎓3A, 12V⎓3A, 15V⎓3A, 20V⎓3A Max Output Type A Max: 5V⎓1.5A, 9V⎓1.5A, 12V⎓1.5A/3A Max Certification: CE, FCC, UKCA, C-Tick, ROHS

...Read more View Product

£30.50

Alfatronix Powerverter Double USB Power Outlet - Front Fit - 2 x 1.5A

Input voltage range: 9-32Vdc Output voltage: 5Vdc +/- 0.2V Output Power: Double output 3A (2 x 1.5A) Ingress Protection: IP30 Dimensions: Ø47 x 33mm (Mounting Hole Ø30mm) Fitting: Front Fit Version Weight: 20g The Safe Alternative For On Board Power The widespread use of smartphones and computer tablets has created an increasing need for user accessible, on the move charging systems. The PowerVerter USB Chargers can be easily installed onto any vessel and allow both crew and passengers to readily access power to charge any device connected via a USB lead. This type of system has the distinct advantage of largely negating the need for mains electricity. The 5Volt DC power is much safer than mains, so installation is quick and simple. The charging facility can be accessed directly and power their own USB charging lead. All versions in the range can be connected directly to both 12Vdc and 24Vdc systems without adjustment. The advanced electronic design will also automatically detect if the device is an Apple or Android configuration and alter the charging process accordingly. This ensures that whatever device is connected, be it Apple, Android, iPad, phone or tablet, it will always be charged as fully as time and capacity allow. The Range The PowerVerter USB range has been completely re-designed to include a standard design that can be used in regular as well as slim-line installations. Aesthetically the design has been improved with a dark grey body and contrasting light grey ring as well as an attractive and more obvious LED indicator. This helps to draw attention to the unit and encourages use. Electronically, the design now includes automatic short circuit detection, so in the event of tampering or compromise, the unit will automatically shut down, then re-start again once the fault has been removed. A charger only version is also available for permanent, behind the scenes installations without customer interface. The range is completed with our ‘Pod’. This is ideal for retrofit installations and is designed to fit underneath the seat in front. This system can also be bought as a complete assembly including; PVPro USB charger, pod and 1.2m of fused cable. Commercial Installations The Powerverter USB chargers are manufactured using rugged components to provide years of service in demanding commercial environments. Due to the limitations of public use, the guarantee on these products is limited to three years. The PowerVerter USB chargers offer an advanced design that effectively counteracts the voltage drop common when output currents vary as different devices charge at different rates. This avoids the common problem of the phone or tablet indicating it is charging when in fact very little current is being supplied. They also have an exceptionally low quiescent current of less that 2mA meaning that multiple devices can safely be installed throughout buses and coaches without materially discharging the battery. They have been designed to meet the rigorous standards required for on board commercial vehicle applications including BS EN50498 and ISO 7637-2 and are both CE and E marked. The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum reliability. All versions have a subtle blue LED light to highlight their location on the vessel.

...Read more View Product

£495.99

Alpicool Portable Fridge Freezer – TWW35 35L – Battery Powered

THQ Alpicool TWW35 12v/24v + Mains Charging, 35L Portable Battery Powered Fridge Freezer – with LG Compressor First of all we love this fridge. It’s the go anyway, do anything fridge. The 230v and 12v charging options, plus additional solar if required, its a great model, ‘out and about’ fridge. Plus if you need a back up fridge at home or have 230v plugs in your camper, you can charge it direct off that. The Alpicool TWW35 Portable Battery Powered Fridge Freezer uses a high quality + high performance LG Compressor meaning it runs quieter and more efficiently than many other fridges on the market. It features a clever door/ lid hinge system, meaning it can open outwards both left and right which is also removable making it a lot easier for cleaning. This lid can be used as a seat, or as a work surface with a location for the chopping board provided, neatly stored on the underside of the fridge lid. With the Alpicool having the Dual Climate option, you can store a range of different food and drink products at a temperature which suits the whole party. The Mobile APP connectivity is great way to monitor the fridges battery capacity along with making sure the Temperature is set to where you like it. Yep thats right, you can monitor and control the temperature and power usage separately via bluetooth on app on your smart phone (app – “Car Fridge Freezer”). The Durable wheels and telescopic handle make it a lot more practical for transportation which can be used on multiple terrains. Features: Digital LED Control Panel Bluetooth app control and monitoring via smart phone Dual Temperature Fast Cooling High Performance LG Compressor (quiet operation) Removable Lithium Battery USB Output for Phone Charging Black in Colour Reversible Opening Lid (opening left or right + removable) Secure Door Catch preventing opening while moving Easily Removable baskets for removing all contents food and drink at once Water draining system/ Drain Plug in both compartments which aids easy cleaning Chargeable via 12v in car socket or standard household mains (chargers included) or via Solar (solar panels available separately) 2 Year Warranty Technical Speciation: Model: TWW35 – with Uprated LG Compressor Capacity: 35 Litres Outer Dimensions: L600mm x W400mm x H440mm Fridge Internal Dimensions: L200mm x W309mm x H154mm Freezer Internal Dimensions: L269mm x W309mm x H330mm N.W: 17.5kg Operation: AC100-240v, DC12/24v Rated Power Unit: 60w Chilling Temperatures: -20 – +20°c

...Read more View Product

£1,226.39

Victron 1110w Monocrystalline Solar kit with SmartSolar 250/60 MPPT, Mounts, Cables & MC4s

1110W Victron Energy Mono Solar Panel Kit - Perfect for Campervans, Motorhomes, Boats & Narrowboats 6 x 185w Panels, sizes are 1485x668x30mm This kit is designed for the panels to be joined in series, mounts are optional. This 1Kw+ Large Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 250/60 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 10m black extension leads Full Kit with Victron 6 * 185W Monocrystalline panels, OPTIONAL 6 * plastic corner fixing bracket sets or 6 * Aluminium Solar Bracket sets, Cable entry Gland, Victron SmartSolar Bluetooth enabled 250/60 MPPT charge controller, 10m of Black PV Extension Cable s(x2) with MC4 Connectors, Mounts available (optional): 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets This highly efficient Victron solar 1110w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Wiring guide for Solar Panel Kits in Series

...Read more View Product

£98.99

50W 12V Solar Panel With 5M Cable (German Solar Cells)

We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This high efficiency, waterproof 50W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system or 2.5mm extension cable. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller.The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.If you are planning to use this solar panel to charge a 12V battery or battery bank: please note this panel requires a solar charge controller / regulator to charge a 12V battery. To view the full range of solar charge controllers we offer, please visit the Solar Charge Controllers category of our online shop. Solar panel specifications: Peak power: 50W Maximum power voltage: 20.2V Maximum power current: 2.48A Open circuit voltage: 23.9V Short circuit current: 2.63A Power allowance range: +/- 3% Dimensions: 590 x 505 x 25mm Weight: 4.2 kg 4 mounting holes 6 x 9 mm 2 x 5m of high quality single core solar cable 2.5mm cross section Male and female MC4 connectors attached

...Read more View Product

£118.80

Clayton Power – LPS II – Remote

Clayton Power – LPS II – Remote Dimensions Width: 75 mm Height: 50 mm Depth: 15 mm Connection Cable: 6 m

...Read more View Product

£46.80

Clayton Power – LPS II – Mounting Bracket

LPS II Mounting Bracket is NOT included in the LPS II as standard. Weight 1 kg Dimensions 20 × 15 × 5 cm

...Read more View Product

£1,099.00

Victron Energy Smart Lithium LiFePO4 12V battery 200Ah full cycle bluetooth BMS

Victron Lithium Smart 200Ah LiFePO4 battery is smaller and lighter than lead acid batteries. Incredibly robust with a very long cycle life and very deep discharge available. Connect via Bluetooth to your smartphone to view discharge current and power, discharge duration, cycles and more. Brand: Victron Energy Connectivity technology: Bluetooth Compatible phone models: Most Bluetooth Battery cell composition: Lithium-Phosphate Amperage: 200Ah Nominal voltage: 12.8V Nominal energy: 2560Wh Lithium Smart battery 12,8V With integrated cell balancing Can be parallel and series connected Bluetooth app available to monitor cell voltage and temperature VE.Bus BMS – recommended for systems with our inverter/chargers. miniBMS – recommend for use in small systems. Battery Management System BMS 12/200 – recommended for use in Automotive and Marine’s systems having DC-loads and Alternators. Smart BMS CL 12/100 – recommended for use in Automotive and Marine’s systems having DC-loads and Alternators. Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of an LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery, therefore, consists of 4 cells connected in series, and a 25,6V battery consists of 8 cells connected in series. Rugged A lead-acid battery will fail prematurely due to sulfation: • If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged). • If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime). An LFP battery does not need to be fully charged. Service life even slightly improves in case of a partial charge instead of a full charge. This is a major advantage of LFP compared to lead acid. Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for demanding applications. Efficient In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average leadacid battery is 80%. The round-trip energy efficiency of a LFP battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state). In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions. Bluetooth With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance Battery Specification 200Ah – nominal voltage 12.8V, nominal energy 2560Wh, max. Charge current 400A, max continuous discharge current 400A, recommended max discharge current <200A, end of discharge voltage 10V, dimensions 237 x 321 x 152mm, weight 22kg

...Read more View Product

£72.50

VICTRON ENERGY CYRIX-LI-CT 12/24V 120A INTELLIGENT LI-ION BATTERY COMBINER – CYR010120412

The functionality of the Cyrix-Li-ct is analogous to the Cyrix-ct. The Cyrix-Li-ct will parallel connect a lead acid starter battery and a LiFePO4 battery: if the Charge Disconnect output of the VE.Bus BMS is high, and if it senses 13,4V (resp. 26,8V) or more on one of its power terminals The Cyrix will disengage immediately: when its control output becomes free floating, signalling cell over voltage or cell over temperature, and/or when battery voltage drops below 13,2V. Start assist function: a short positive pulse will close the relay during 30 seconds A built-in transient voltage suppressor will limit the voltage spike that may occur when the Cyrix suddenly disengages due to cell overvoltage or over temperature. Brand Victron Energy Manufacturer Part Number CYR010120412 Voltage 12/24 Continuous current & Breaking capacity at 12V or 24V 120A Current Consumption When Open 4 mA Protection Category IP54 Dimensions H46 x W46 x D80mm Weight (kg) 0.11 Warranty 5 Years

...Read more View Product

£306.00

Victron Energy VE Transfer Switch 5KVA, 1ph, 200-250Vac – COS230502100

The COS230502100 VE Transfer Switch automatically switches between different power sources: between a generator and shore power, between an inverter and a generator, or between an inverter and shore power. The VE Transfer Switch has two inputs and one output, it automatically transfers the available AC power to the output. GTIN 8719076022091 Warranty 5 Years Country of Manufacture Slovenia

...Read more View Product

£890.00

Victron Energy LiFePO4 Battery 12.8V 100Ah Smart – BAT512110610

The Victron Energy 100Ah Smart Battery With integrated cell balancing Can be parallel and series connected Bluetooth app available to monitor cell voltage and temperature Requires one of these BMS-es: VE.Bus BMS – recommended for systems with our inverter/chargers. smallBMS – recommended for use in small systems. Battery Management System BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS 12/200 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Smart BMS CL 12/100 – recommended for use in Automotive and Marine systems having DC-loads and Alternators. Lynx Smart BMS – recommended for use in large systems. Features of the 100Ah Smart Battery RuggedA lead-acid battery will fail prematurely due to sulfation:• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).• If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid.Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below). LFP is therefore the chemistry of choice for demanding applications. EfficientIn several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead acid battery is 80%.The round-trip energy efficiency of a LFP battery is 92%.The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state).In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions. Size and weightSaves up to 70% in spaceSaves up to 70% in weight Expensive?LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency. BluetoothWith Bluetooth cell voltages, temperature and alarm status can be monitored.Very useful to localize a (potential) problem, such as cell imbalance. The 100Ah Smart battery is equipped with Bluetooth and uses this to communicate with the VictronConnect app. The VictronConnect app can be used for:• Monitoring the battery status• Monitoring the battery voltage• Monitoring the battery temperature• To find out when the battery was last fully charged• Monitoring the cell balancing status• Monitoring the individual cell voltages• To view or change the battery settings• To update the battery firmware Brand Victron Energy Manufacturer Part Number BAT512110610 GTIN 8719076043041 Voltage 12.8V Battery Capacity (C20) 100Ah Terminal Type M8 Terminal Layout Right Hand Positive Dimensions (Including Terminals) H197 x W321 x D152mm Weight 14Kg Warranty 3 Years Country of Manufacture China Battery Technology Lithium Battery Application Deep Cycle

...Read more View Product

£789.99

Iconica 5000W 48V HybridOff Grid Solar Inverter With 80A Mppt & 60A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica 5000W 48V hybrid inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A MPPT solar charge controller and a 60A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 5000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 5000VA of continuous power with a strong peak power handling capability of up to 10000VA (to start powerful appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 80A MPPT Solar charge controller: Regulates the input from the solar panels to the batteries, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. Advanced MPPT technology extracts the maximum possible output from the solar panels and operates at up to 98% efficiency. This inverter is therefore well-suited to systems with a large and powerful solar array, with a maximum allowed solar input of 4000W. Performance data for the solar array is displayed on the LCD screen. 3. Enhanced 60A Smart battery charger: Designed to enable safe, efficient and fast (up to 60A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 8 further inverters), offering the possibility of large scale system expansion, with up to 45kw of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately).Additional intelligent features:The Iconica 5000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 48V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries. Inverter specifications:Nominal battery voltage: 48VContinuous power output: 5000W / 5000VA (220-240V AC)Surge power: 10000VAOutput frequency: 50Hz /60 HzOutput waveform: Pure sine waveMaximum solar input power: 4000WMaximum open circuit solar input voltage: 145VSolar MPPT operating voltage: 60-115V DCMaximum solar charging current: 80AMaximum mains AC charging current: 60AMaximum combined charging current: 140APeak efficiency: 93%Solar / AC charger max efficiency: 98%Operating temperature: 0°C to 55°CSupplied with a PC connection cable and PC software CDParalleled operation with up to 8 further units, using a parallel connection kit(s)Size: 120 x 295 x 468 mmWeight: 13.5 kg

...Read more View Product

£515.99

TN Power AGM 12V 230Ah Deep Cycle Battery

230Ah AGM Deep Cycle Leisure Battery TNE Series, TN’s most powerful products, are specially designed for deep cycle application. With numbers of national patent technologies, the cycle life reaches 400-600 cycles at 100% DOD, highly suitable for golf carts, electric wheelchairs, low-speed electric vehicles etc. Maintenance free technology reduce the complexity with water adding during use and become more and more popular in the market. Features Maintenance Free VRLA battery, no need to add water or acid during application. Longer cycle life: 400-600 cycles at 50% DOD. Higher capacity: Patented structure design with high utilization of active material, maximum improve the utilization rate of active material and the utilization ratio of battery internal space, 5%-10% higher capacity than similar products in the market. High performance for large current discharge. New structure for plate grid, greatly reduced resistance of the battery, uniform internal electrochemical reaction under large current discharge, excellent capacity recovery from deep discharge Good corrosion resistance of grid. Unique patent alloy with rare earth material, the grid has super corrosion resistance and creep resistance High performance under low temperature. With added conductive material and cryogenic expansion agent of high activity to the plate, the product is of strong accept ability under low temperature. Safety & reliability. Independent designed automatic anti-dry and removable safety valve for convenient common check as well as the sealing function to reduce water loss in the process of charge and discharge and to improve reaction efficiency of sealing. Application Electric Tricycle Low speed electric vehicles Golf trolleys and golf cart Patrol cars Electric Sight-seeing Tour Bus Sweeper Electric Wheelchairs Lawn mowers etc

...Read more View Product

£404.99

Victron Energy SmartSolar MPPT 150V 85A Tr VE.Can – 150/85 SCC115085411

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC115085411 GTIN 8719076050339 Voltage 12/24/48V Rated Charge Current 85A Nominal PV Power, 12V 1200W Max. PV Short Circuit Current 70A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£349.99

Victron Energy SmartSolar MPPT 150V 70A Tr VE.Can – 150/70 SCC115070411

Victron Energy SmartSolar MPPT 150V 70A Tr VE.Can – 150/70 SCC115070411 The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC115070411 GTIN 8719076050322 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£179.00

Victron Energy BlueSolar MPPT Solar Charge Controller 150/45-Tr – SCC115045222

Victron Energy BlueSolar MPPT Solar Charge Controller 150/45-Tr – SCC115045222 The Victron 150V 45A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring. Ultrafast MPPT Technology: This 45A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array. Inbuilt safety protection: Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring: The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including: Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge. Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters. User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings. The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops. Other features: The Victron BlueSolar MPPT 150-45 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating. This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Specifications: - The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36 / 48V selection*- 2 pairs of terminals (solar panel, battery) for wires up to 35mm2- Max solar panel voltage: 150V- Max solar panel power: 600W (12V) / 1300W (24V) / 1950W (36V) / 2600W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -48mV / -64mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: <35mA (12V) / <20mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 185 x 250 x 95 mm- Mounting dimensions: 225 x 81 mm- Weight: 3kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£1,119.99

Lithium Leisure Battery - Fogstar Drift 12v 628Ah GEN2

Lithium Leisure Battery - Fogstar Drift 12v 628Ah - GENERATION 2 Large-scale off-grid power built on the upgraded engineering and accuracy of Drift Gen2. The Fogstar Drift Gen2 12V 628Ah LiFePO4 Battery delivers major capacity with refined accuracy, efficiency and durability. Every critical component has been upgraded for improved measurement precision, stronger power handling and reliable long-term performance. If you’re running high-demand systems in campervans, motorhomes, boats, cabins or solar storage setups, this is the benchmark for ultra-high-capacity 12V power. Key Features 300A Smart BMS for High-Demand Systems:The next-generation 300A Battery Management System handles heavy loads with ease. Perfect for powerful inverter setups and demanding off-grid applications. 0.2A Shunt Accuracy:Drift Gen2 delivers highly accurate power monitoring, giving you tighter state-of-charge readings and more reliable system performance. Active Cell Balancer for Maximum Efficiency:A built-in active balancer keeps every cell perfectly aligned. This boosts efficiency, improves cycle life and maintains consistent output. Premium EVE Prismatic Cells:Built with Grade A MB31 EVE cells that deliver consistent performance, solid stability, strong safety and a long service life. Full Victron Plug-and-Play Integration:Drift Gen2 communicates cleanly with Victron systems for faster installation and more accurate system data. IP67 Waterproof and Dustproof:Fully sealed against water and dust. Ideal for marine installations, damp lockers and rugged environments. Bluetooth Monitoring via the Fogstar App:Track real-time voltage, current, SOC, temperature and more using the Fogstar Drift App for iOS and Android. Automatic Low-Temperature Heating:The built-in heater automatically warms the battery to a safe temperature before charging, protecting the cells in cold weather. Improved Hardware and Design:A custom lid, upgraded terminals and a physical on/off switch make installs cleaner and maintenance easier. Designed & Supported in the UK:Created by our award-winning engineering team with full UK-based technical support. Backed by a 10-year warranty. Technical Specifications Energy: 8,038Wh Capacity: 628Ah Voltage: 12.8V LiFePO4 Cycle Life: 8000 Cycles (80% DOD) Recommended Charge Voltage: 14.4V Max Continuous Discharge: 300A Cell Type: EVE Grade A MB31 BMS: 300A Smart BMS with 0.2A shunt accuracy and active balancing Monitoring: Bluetooth via Fogstar Drift App Heating: Integrated low-temp heating IP Rating: IP67 Dimensions: 635 (L) x 244 (W) x 220 (H) Weight: Approx 53Kg Terminals: M8 - 1.25 pitch - 12mm (bolts included). System Configuration Options Connect up to 4 batteries in series for 48V systems Connect up to 16 batteries in parallel to increase total capacity

...Read more View Product

£56.08

Blue Sea 11001 Switch Battery e-Series Selector 3 Position with AFD

Switch Battery e-Series Selector 3 Position with AFD Blue Sea PN 11001 Switches a single battery to a single load group Includes AFD (Alternator Field Disconnect) Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting View all Blue Sea e-Series Battery Switches

...Read more View Product

£20.00

Christmas Gift Voucher ( No Physical Product )

You're giving the perfect gift! Complete your secure purchase below. Your Van Junkies Gift Voucher will be emailed to you immediately, ready to be forwarded or printed.Please note: This is a virtual e-mail based voucher, and no physical product will be received or posted.

...Read more View Product

£1,599.98

1800w Off-grid Solar Kit with all black Panels & Victron MPPT

Elevate Your Off-Grid Experience with the 1800W Off-Grid Solar Kit by Van Junkies For those looking to power up off-grid spaces like narrowboats, shepherd huts, garages, or summer houses, Van Junkies’ 1800W Off-Grid Solar Kit featuring 4 x DMEGC Solar Panels and 2 x Victron MPPT Charge Controllers is the ultimate solution. Designed to harness clean, renewable energy, this kit provides an efficient and reliable power source, perfect for any off-grid setup. This kit is also perfect for large adventure truck installations, providing the panels are well supported using either a roof rack or a mounting system similar to Unistrut. What’s Included in the 1800W Off-Grid Solar Kit? DMEGC 450W Solar Panels x 4 - Known for durability and efficiency, DMEGC's monocrystalline solar panel ensures maximum energy production even on cloudy days. 2 x Victron MPPT Charge Controllers - Top-tier MPPT's (Maximum Power Point Tracking) controllers by Victron, they optimizes energy harvest, improve battery lifespan, and seamlessly integrate with other power components. Essential Wiring and Accessories - Installation is simplified with included high-quality cabling and fusing, allowing easy setup. Why Choose This Kit? High Efficiency - With 4 x 450W solar panels, this kit generates ample power to run essential devices, lighting, and small appliances. Reliability and Safety - The Victron MPPT controllers prevents overcharging, ensuring safe and efficient power flow to your batteries. Versatile Applications - Perfect for off-grid installations in remote settings, this kit empowers you to stay connected and powered up, no matter where your adventures or needs take you. The Van Junkies Advantage Van Junkies is committed to high-quality, robust, and dependable off-grid solar solutions. With expertise in renewable energy and a dedication to empowering off-grid living, our team offers technical support to guide you through installation and usage. Upgrade your off-grid lifestyle with Van Junkies’ 1800W Solar Kit—wherever your off-grid dreams lead, this kit is your companion for sustainable, reliable energy. Kit Includes: 4 x DMEGC Black Frame Monocrystalline Solar Panel2 With High-Efficiency PERC Cells 2 x Victron Smartsolar MPPT Solar Charge Controllers 150/70 2 x 16mm (2m) fused battery leads 2 x 6mm (10m) PV Extension Cables 2 x Double Pole Breakers 2 x Solar Panel Double Cable Roof Entry Glands (Black or White) for Motorhome or Campervan Specifications (per panel) Peak power: 450W Maximum power voltage: 40.25V Maximum power current: 13.17A Open circuit voltage: 37.79V Short circuit current: 14.17A Dimensions: 1762 x 1134 x 30 mm Weight: 24.5 kg Male and female MC4 waterproof connectors UK mainland deliveries only. For non-mainland addresses (including the Scottish Highlands) please contact us for a delivery quote. Not quite what you are looking for or need batteries to match? We can put together any combination of panels, controllers & batteries, give us a call.

...Read more View Product

£164.99

Victron Monocrystalline panel 215W-24V Mono 1580x808x35mm series 4a SPM042152402

The Victron 215W Monocrystalline Solar Panel is the perfect addition to any off-grid application. They are pre-wired with MC4 connectors, making for easy installation. Their sturdy, anodized aluminium frame allows the solar panels to be easily roof-mounted with a variety of standard mounting systems. 215W solar panel Monocrystalline structure Perfect for boats and campervans Rigid construction GTIN 8719076040378 Voltage 24V Nominal Power 215W Cell Type Monocrystalline Number of Cells in Series 72 Maximum System Voltage 1000V Dimensions L1580 x W808 x D35mm Weight 15Kg Warranty 5 Years Country of Manufacture China

...Read more View Product

£815.99

530W MCS certified black semi-flexible solar panel kit

530w MCS Certified Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/30 (5-year panel warranty) This 530w Flexible Durable MCS Certified Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and efficient charging of your battery. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 530w Flexible Durable Solar Panel with MCS Certification Dimensions: 2312 x 1137 x 3.4 mm Victron Energy SmartSolar MPPT 100/30 Sikaflex 522 Caravan / Motorhome Adhesive 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 5 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar panel specifications: Peak power: 530W Maximum power voltage: 41.35V Maximum power current: 12.83A Open circuit voltage: 49.90V Short circuit current: 13.76A Protection: IP68 Dimensions: 2312 x 1137 x 3.4 mm Weight: 10.5 kg 2 x 0.3m of 4.0m² solar cable attached The FMCS-530M is a cutting-edge 530W MCS-certified semi-flexible monocrystalline solar panel that redefines efficiency and adaptability. Built with 182mm silicon wafers, PERC technology, and half-cut cells, this panel maximises power output while reducing energy losses. Its innovative design ensures exceptional durability, lightweight construction, and superior performance, even in challenging conditions. Perfect for curved rooftops, weak load-bearing surfaces, and corrugated metal roofs, the FMCS-530M is the ideal solution for residential, commercial, and industrial solar applications.

...Read more View Product

£11.35

W4 Tube Cutters Light Duty 31295

W4 PUSHFIT TUBE CUTTERS Light Duty For Use With Semi-Rigid Plastic Pipe. Click here to view all W4 Water Fittings

...Read more View Product

£156.99

40A 12V Intelligent automatic multi-stage mains battery charger

This 40A 12V automatic multi-stage mains battery charger is designed to enable safe and efficient unattended charging of a 12V battery or battery bank from a mains power source (220-240V AC). This mains charger boasts an advanced 7 stage charging process which delivers faster and more efficient charging, whilst eliminating the risk of voltage fluctuations. This unit is able to charge either a single 12V battery, or several 12V batteries connected in parallel (batteries must be the same type, capacity and age). This mains battery charger is compatible with Lead Acid batteries, including AGM, Gel and Wet cell batteries. Key features: Safe unattended charging: the unit features inbuilt safety functions (protection against DC short circuit, overheating, overcharging and reverse polarity of the battery), which allow the charger to be left permanently connected to the battery for unattended automatic charging. Unlike many other mains chargers, the charging voltage is also free from peaks which offers smooth uninterrupted charging. Continued charging during battery use: the charger will continue to operate while energy is drawn from the battery during use. The unit will maintain the charge if the battery is already at full capacity. Boost-charging feature: this preliminary charging stage can improve battery condition and recover lost capacity from older batteries. It improves the charge delivered to the batteries, thereby increasing battery life and preventing premature battery failure. Dead battery recovery: the desulphation stage is able to break down sulphation that occurs in batteries which have been left flat for extended periods of time, returning them back to full charge. Automatic temperature control: to maintain an optimal internal temperature, the inbuilt fan is automatically enabled when a high temperature or charging current is detected. LCD Display: shows vital information regarding the charging process (charging voltage / charging current / different charging stages). LED lights also indicate the battery type. Power pack function: can provide a direct supply of power to a 12V load (e.g. 12V fridge) with no battery connected (e.g. during battery replacement). This charger is also supplied with a 1.5m mains AC cable with a UK 3-pin plug, battery cables, and spare fuses. Operating Voltage range (AC): 190V - 265V (full capacity) / 50 Hz DC output current: 40A DC output voltage: 12V Suggested battery capacity: 40 - 300Ah Bulk / absorption charging voltage: 14.2V - 14.8V DC (depending on the battery type) Float charging voltage: 13.2V - 13.8V (depending on the battery type) Efficiency: <88% Operating temperature range: 0°C - 40°C Inbuilt fan Isolated DC output Dimensions: 226 x 175 x 95 mm Weight: 2.4 kg

...Read more View Product

£160.49

Victron Energy Shore Power Cord 15m 16A/250Vac (3x2.5sqmm) SHP302501500

CE certified Waterproof IP 56 shore power cable and inlet Moulded plug and connector Power indication LED Protection cap on female connector Stainless steel or Polyamide inlet

...Read more View Product

£69.99

Victron Orion 24V To 12V 25A DC-DC Step Down Converter Non-Isolated 24-12-25A IP20

Victron Orion DC-DC Converter 24v to 12v Non-Isolated, High Power Remote on-offThe remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual). Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24 V system. All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel. IP43 protectionWhen installed with the screw terminals oriented downwards. Screw terminalsNo special tools needed for installation. Input fuseOn 12 V and 24 V input models only. Features of the - Victron Orion 24/12V-25A DC-DC Converter IP20 Victron Orion voltage dropper designed to convert an input voltage of 24V DC (in fact anywhere between 18V and 35V DC) into a 12V DC output. The output voltage of this model can be adjusted between 10 volts and 15 volts DC. This voltage converter is suitable for use on most electrical items on board boats, motorhomes and other automotive applications, including charging a 12V battery on a 24V system. The converter features a remote on-off connector switch enabling it to be operated with a low power switch or by the engine run/stop switch. It can also be connected in parallel with up to 4 other Orion converters to increase the output current. These droppers are easy to install with no special tools needed. Victron Energy Orion 24/12-25 DC-DC converters are very efficient, running at 96% efficiency due to the use of active rectification (also known as synchronous rectification). Remote on-off connector The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by the engine run/stop switch (see manual). All models with adjustable output can also be used as a battery charger For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system. All models with adjustable output can be paralleled to increase output current Up to five units can be connected in parallel. Easy to install Delivery includes four Insulated Fastons Female Crimp 6.3mm (eight Fastons in case of the Orion 24/12-40). PRODUCT CODE: ORI241225020

...Read more View Product

£269.95

Clayton Power – LPS II – 5 m Cable Set For Alternator + Extra Cables for Super Charge

Clayton LPS II Cable Set for wiring up your Alternator charging. The 5m cable kit consists of everything you need to install the LPS into the standard 12V set up within a vehicle. The cables and fuses included in the kit are wired into the DC in and C1 connection points at the back of the LPS unit. This cable kit also includes the additional cables required when installing the Clayton Power Super Charger.

...Read more View Product

£348.99

Rolls AGM Battery R12-200AGM

Specifications Weight 60 kg 132.5 lbs Length 52.2 cm 20.55" Width 24.0 cm 9.45" Height Inc. Term. 22.4 cm 8.82" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Rope Series AGM-R Warranty See Warranty Terms Volts 12 BCI 4D Cells 6 Terminal Type F8 Included Hardware Stainless Steel Nuts & Bolts Size & Thread M8 Charge Recommended Charge Current 40 A Maximum Charge Current 60 A Self-Discharge Rate Less than 2% per month at 25°C (77°F) Capacity Cold Crank Amps (CCA) 0°F / -18°C 1100 Marine Crank Amps (MCA) 32°F / 0°C 1380 Reserve Capacity (RC @ 25A) 380 Minutes Reserve Capacity (RC @ 75A) 100 Minutes Capacity Affect by Temperature 40°C(104°F) 25°C(77°F) 0°C(32°F) -15°C(5°F) 102% 100% 85% 65% Hour Rate Capacity / AMP Hour Current / AMPs @ 100 Hour Rate 220 AH 2.2 A @ 20 Hour Rate 200 AH 10 A @ 10 Hour Rate 162 AH 16.2 A @ 5 Hour Rate 144 AH 28.8 A Cut Off Voltage Constant Current Discharge VPC 1 hr 2 hr 3 hr 5 hr 8 hr 10 hr 103 55.1 40.8 28.8 19.6 16.2

...Read more View Product

£389.99

330W Sharp Nu-Jc Monocrystalline Solar Panel With High-Efficiency Perc Cells SRP-330M

Van Junkies are proud to present this high-quality 330W solar panel from leading solar manufacturer Sharp, who have over 60 years of experience with solar technology and over 50 million solar panels installed all over the world. This MCS certified panel is perfect for a wide variety of applications, from grid-tie household systems to off-grid installations where mains power is limited or unavailable such as boats, caravans, campervans, cabins or glamping huts. These high-power panels are ideal for large systems where the time and expense of fitting a high Wattage array needs to be minimised. High efficiency solar cells use PERC technology with 5 busbars to extract more power from a smaller surface area, increasing the output of the panel without increasing the size. Half-cut cell construction decreases internal losses, reduces risk of hotspots and improves performance in shaded conditions. The robust design of the panel is IP68 (waterproof) rated, and tested for resistance against PID, salt mist, ammonia, heavy snow, dust and sand. This thorough testing ensures a long service life even in harsh marine or wilderness conditions. A pair of male / female MC4 connectors are crimped on the end of the cable for easy waterproof connection to other solar panels, extension leads or your existing system. With a 15-year workmanship guarantee and 25-year output guarantee, you can be confident in the quality, durability and longevity of this premium solar panel. Specifications: Peak power: 330W Maximum power voltage: 34.27V Maximum power current: 9.63A Open circuit voltage: 41.32V Short circuit current: 10.35A Power tolerance: 0/+5% Dimensions: 1,684 x 1002 x 40 mm Weight: 19.5 kg Mounting holes for ease of installation 2x 1.2m of high-quality single core solar cable Male and female MC4 waterproof connectors The product is covered by a 15 year workmanship warranty provided by Sharp Electronics. In addition, solar cells are guaranteed to produce at least 97.5% of nominal power in the first year after purchase and less than 0.7% degradation of nominal power each year after until 25 years after purchase, for a minimim of 80.7%.

...Read more View Product

£3.84

Blue Sea 2404 BS2404 Terminal Block/Independent 4 Circuits 20A

Terminal Block 20A - 4 Circuit BS2404 Blue Sea 2404 Closed back design completely insulates power from the mounting surface Each screw pair is one isolated circuit Jumpers allow creation of common circuits

...Read more View Product

£89.99

MaxxFan MaxxShade

MaxxFan MaxxShades When looking to perfect your camper & give your roof vent a finishing touch, the MaxxFan MaxxShade has got to be at the top of your list! This awesome product allows you to add additional lighting, block any heat from coming into your van & will give you fresh air through the handy vents on the sides. The MaxxShade can be open or closed with the sliding door attached & your MaxxFan will still be able to be fully operational whilst your MaxxShade is shut! The ultimate accessory for your Maxxfan, which is perfect for all seasons! This is the perfect solution to blocking out any unwanted sunlight & UV rays whilst sleeping at night or relaxing in your camper. The MaxxShade has a reflective backing installed to deflect the heat from entering your van. Fully retractable, spring-loaded & features a secure snap-lock closure. Manufactured from durable plastics to stand the test of time! Super simple to install on your existing Maxxfan using the 4 existing screw holes. Fits 400 x 400mm & 356 x 356mm roof vents. Kit contents: 1x MaxxShade.

...Read more View Product

£137.00

Victron Energy VE.Bus BMS V2 – BMS300200200

The VE.Bus BMS and VE.Bus BMS V2 are Battery Management Systems (BMS) designed to interface with and protect a single, or multiple Victron Lithium Battery 12,8V & 25,6V Smart (LiFePO4 or LFP) in systems that have Victron inverters or inverter/chargers with VE.Bus communication. It monitors and protects the batteries against over voltage and under voltage of any individual cell, and also over temperature or under temperature conditions. Features The next generation VE.Bus BMS V2 The VE.Bus BMS V2 is the next generation of the VE.Bus Battery Management System (BMS). It is designed to interface with and protect Victron Lithium Smart (LiFePO4) batteries in systems that have Victron inverters or inverter/chargers that have VE.Bus communication. Protects each individual cell of a Victron Lithium Smart battery For reliable and safe operation, a LiFePO4 battery must be monitored and protected against over voltage and under voltage of any individual cell, and also over temperature or under temperature conditions. The Victron Lithium Smart battery range includes integrated cell voltage monitoring, cell voltage balancing, and temperature monitoring. If the cell voltage or battery temperature is outside of the allowable range, this is communicated to the BMS via two BMS cables with M8 circular connectors. In systems with multiple batteries, the BMS cables of each battery are connected in series (daisy chained), with the first and the last BMS cables connected to the BMS. Based on the status of the Victron Lithium Smart battery or batteries, the BMS will: Generate a pre-alarm signal to alert of an imminent cell under voltage condition. Disable inverting in VE.Bus inverters or inverter/chargers via VE.Bus, and disable other loads via the ‘Load Disconnect’ terminal in the event of a cell under voltage condition. Disable charging in VE.Bus inverters or inverter/chargers via VE.Bus, disable VE.Direct and VE.Can solar chargers via a GX device and disable other chargers via the ‘Charge Disconnect’ terminal in the event of a cell overvoltage, under temperature or over temperature condition. Communication with VE.Bus products MultiPlus, Quattro or Phoenix inverters connect to the ‘MultiPlus/Quattro’ port with a standard RJ45 UTP cable. The BMS disables inverting in the case of a cell under voltage condition and disables charging in the case of a cell over voltage or temperature condition. Communication with remote devices A GX device (such as a Cerbo GX), Digital Multi Control (DMC) panel or a VE.Bus Smart dongle (including any combination) can be connected to the BMS via the ‘Remote panel’ port. These accessories can all be used in combination with the BMS to remotely control the VE.Bus Inverter or inverter/charger switch state (on/off/charger-only). Auxiliary power input and output terminals The BMS has a dedicated power output terminal (GX-Power) for a GX device and an auxiliary power input terminal (Aux-In) for an external DC power source, such as an AC/DC adaptor. In the event of a system shutdown, the GX device will remain powered via the auxiliary power input or be disconnected to prevent further battery discharge. Remote terminals These terminals can be used to switch the BMS on or off. When the BMS is off, both outputs will be free floating so that loads and chargers are turned off. There are two remote terminals, namely, ‘Remote L’ and ‘Remote H’. A remote on/off switch or relay contact can be connected between L and H to switch the BMS on or off. Alternatively, terminal H can be switched to battery plus, or terminal L can be switched to battery Minus. LED indicators The BMS has the following LED indications: Status (blue): Lights shortly once every 10 seconds to indicate normal operation. Temp or Cell>4 V (red): Lights when the charge disconnect output is low because of cell overvoltage or overtemperature. Cell>2.8 V (blue): Lights when the load disconnect output is high and the battery cell voltages are above 2.8 V. GTIN 8719076057277 Brand Victron Energy Manufacturer Part Number BMS300200200 Protection Category IP20 Dimensions H24 x W95 x D106mm Weight 0.12Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£1,389.99

Iconica Max 8000W 48V Hybrid Off Grid Solar Inverter With 8000W Solar Input, Dual-Input 80A 500V Mppt Solar Controller, 120A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica MAX 8000W 48V hybrid inverter intelligently combines the functions of an 8000W pure sine wave inverter, 80A MPPT solar charge controller with two independent inputs and an extremely powerful 120A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This inverter features the rare and unique ability to power AC appliances without connection to a battery - directly from solar power.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent, or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g., remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 8000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 8000VA of continuous power with a strong peak power handling capability of up to 16000VA (to start powerful appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 8000W high solar input MPPT Solar charge controller: Two independent solar inputs can each accept up to 4000W of solar power. The MPPT charge controller regulates the input from the solar panels and charges the batteries at up to 80A, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. Advanced MPPT technology extracts the maximum possible output from the solar panels and operates at up to 98% efficiency. This inverter is therefore well-suited to systems with large and powerful solar arrays, or two solar arrays with different panels or light conditions. Performance data for the solar arrays is displayed on the LCD screen.3. Enhanced 120A Smart battery charger: Designed to enable safe, efficient, and fast (up to 120A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 5 further inverters), offering the possibility of large-scale system expansion, with up to 48kw of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately). Additional intelligent features:The Iconica MAX 8000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Load power without a battery: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. By powering loads using the energy directly supplied from the solar panels, this Iconica inverter offers a uniquely independent and versatile power system, free from batteries if preferred. Removing the need for batteries also increases the efficiency of the energy generated from the solar array by reducing the power losses that this transfer of energy would usually cause. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. For example, if 4000W of solar power is flowing into the inverter, 2000W can be used to run appliances whilst the remaining 2000W will be used for charging the battery bank. - Output source priority: This intelligent feature allows the user to set output source preferences (solar/battery power/mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g., which source of energy is given priority for the AC output if solar power is insufficient/if battery voltage is too low/if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/using a combination of solar power and mains power/from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated removable LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc. The LCD display is removable and can be positioned up to 20m away from the inverter for remote system monitoring (requires additional basic RJ45 connection cable – not included). - Customisable RGB light bar: LED indicator strip across the front of the inverter can be programmed to show battery charge level or solar/mains/battery input in customisable colours, allowing you to easily see the system status at a glance.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/battery/AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/Excel formats from the PC software. This inverter also has the potential to send data to a mobile app using the built-in wi-fi kit, or to an online user portal a Wi-Fi connection kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email/push notification/SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1, 2 or 3 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 48V flooded, sealed GEL/AGM lead-acid and Lithium batteries with pre-defined charging programs (consult the battery supplier for advice on Lithium battery charging settings). A user-defined battery type with numerous customisable settings is also available for charging other battery types. Inverter specifications: Nominal battery voltage: 48V Continuous power output: 8000W/8000VA (220-240V AC) Surge power: 16000VA Output frequency: 50/60Hz Output waveform: Pure sine wave Maximum solar input power: 4000W per input (8000W total) Maximum solar input current: 18A per input Maximum open circuit solar input voltage: 500V (open circuit) MPPT solar operating voltage: 90V - 450V Maximum solar charging current: 80A Maximum mains AC charging current: 120A Maximum combined charging current: 120A Peak efficiency: 93% Operating temperature: -10°C to 50°C Supplied with solar connectors, cable glands, PC connection cable and PC software Size: 147.4 x 432.5 x 553.6 mm Weight: 18.4 kg

...Read more View Product

£379.99

Iconica 3000W 24V Hybrid Off Grid Solar Inverter - 40A Mppt And 25A Mains Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. Please note this is a 24V system. The Iconica 3000W 24V hybrid inverter intelligently combines the functions of a 3000W pure sine wave inverter, 40A MPPT solar charge controller and a 25A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 3000W 24V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 3000VA of continuous power with a strong peak power handling capability of up to 6000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 40A MPPT solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.3. Enhanced 25A Smart battery charger: Designed to enable safe and efficient unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.Additional intelligent features:The Iconica 3000W 24V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences(solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. The inbuilt fan is helps to maintain an optimal operational temperature.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 24V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.If you are unsure whether 3000W is enough for your appliances, please refer to the following table: Table of typical power consumption of domestic appliances.Inverter specifications:Nominal battery voltage: 24VContinuous power output: 3000W / 3000VASurge power: 6000VAOutput voltage: 230V ACOutput frequency: 50Hz /60 HzOutput waveform: Pure sine waveMaximum solar input power: 1000WMaximum open circuit solar input voltage: 102VMaximum solar charging current: 40AMPPT operating voltage range: 30V – 80VMaximum mains AC charging current: 25AMaximum combined charging current: 60APeak efficiency: 93%Operating temperature: -10C to 50CSupplied with a PC connection cable and PC software CDTerminals for mains power connectionSize: 32 x 22.5 x 8.8 cmWeight: 7 kg This product is covered by a 1 year manufacturer warranty

...Read more View Product

£154.95

Victron Energy Blue Smart IP65 Charger 12V 15A 1 Output UK – BPC121531024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC121531024R GTIN 8719076039761 Voltage 12V Charge Current 15A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H60 x W105 x D190mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£73.19

Victron Energy Blue Smart IP65s Charger 12V 5A 1 Output UK – BPC120533024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC120533024R GTIN 8719076041214 Voltage 12V Charge Current 5A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H45 x W81 x D182mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£83.99

Sterling Power Remote Control with 10m Cable – BBURC

Displays: Voltage / Warnings / Temperatures. Can be used as an independent voltmeter measuring input battery voltage and output battery voltage. Can remotely modify the Batt. the Batt. Charger: Force the unit to float Force the unit to 1/2 current limit Force the unit to standby Force the unit off Force the unit to Night Mode Reset both Remote and Charger 54mm diameter

...Read more View Product

£29.49

10M Single Core Extension Cable 6.0Mm2 With Mc4 Connectors

This single core solar extension cable 6.0mm2 cross section has been specially designed for solar panels to carry high current and have negligible power loss. It comes with waterproof MC4 connectors ("male" on one end, "female" on the other) which can be easily connected to similar MC4-type connectors coming with most solar panels, including Photonic Universe solar panels. This cable is suitable for all weather conditions including cold and hot temperatures.

...Read more View Product

£63.55

Victron Polycrystalline panel 60W-12V Poly 545x668x25mm series 4a SPP040601200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£214.99

Rolls Series 5 S12-95 AGM Deep Cycle Battery

Deep cycle refers to applications that typically discharge 60-80% of the battery capacity. The Rolls S Series S12-95 AGM Deep Cycle AGM battery features thick plates with a high density active material. This design allows for reserve energy to be stored deep within the battery plates and released during slow discharge. The Rolls AGM range are sealed, non hazardous and completely maintenance free and?will suit the customer looking for a long reliable, maintenance free service life. Rolls has designed a Deep Cycle VRLA battery with high reserve capacity, long cycle life and low internal resistance, while achieving superior cranking performance. Rolls AGM batteries are the smart choice for demanding renewable applications.They are designed and built differently than standard batteries. They use more lead, heavier plates and other proprietary materials that enable them to deliver more power and capacity over many life cycles. Specifications Weight 23 kg 50.5 lbs Length 26 cm 10.24" Width 16.9 cm 6.65" Height Inc. Term. 23.7 cm 9.33" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Rope / Plastic Handle Series AGM-S Warranty See Warranty Terms Volts 12 BCI Grp 24 Cells 6 Terminal Type DT Included Hardware Stainless Steel Nuts & Bolts Size & Thread DT Charge Charge Voltage Range 14.7V @ 25°C (77°F) Float Voltage Range 13.8V @ 25°C (77°F) Recommended Charge Current 15 A Maximum Charge Current 25 A Self-Discharge Rate Less than 2% per month at 25°C (77°F) Internal Resistance 5.5 mΩ Capacity Cold Crank Amps (CCA) 0°F / -18°C 500 Marine Crank Amps (MCA) 32°F / 0°C 800 Reserve Capacity (RC @ 25A) 155 Minutes Reserve Capacity (RC @ 75A) 34 Minutes Capacity Affect by Temperature 40°C(104°F) 25°C(77°F) 0°C(32°F) -15°C(5°F) 102% 100% 85% 65% Hour Rate Capacity / AMP Hour Current / AMPs @ 100 Hour Rate 95 AH 0.95 A @ 20 Hour Rate 85 AH 4.25 A @ 10 Hour Rate 77 AH 7.7 A @ 5 Hour Rate 70 AH 14 A Cut Off Voltage Constant Current Discharge VPC 1 hr 2 hr 3 hr 5 hr 8 hr 10 hr 43.8 25.6 19.2 13.9 9.2 7.7 Specifications Weight 23 kg 50.5 lbs Length 26 cm 10.24" Width 16.9 cm 6.65" Height Inc. Term. 23.7 cm 9.33" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Rope / Plastic Handle View all Rolls Batteries

...Read more View Product

£171.00

Victron Blue Smart IP67 24/12(1) Battery Charger 24V 12A BPC241247026

The Blue Smart IP67 Waterproof Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP67 Waterproof Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers. Completely encapsulated: waterproof, shockproof and ignition protected Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin. The highest efficiency ever! Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. Storage Mode: Less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. Protected against overheating Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail. Two LEDs for status indication Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on

...Read more View Product

£35.99

Remote Meter/Display Mt11 With 5M Cable For 10A-30A Dm Series Dual Battery Mppt Solar Charge Controllers

This high quality, brand new remote display / monitor can be used with 10A - 30A dual battery MPPT solar charge controllers/regulators (DM series). The unit displays important charging parameters such as:Battery and solar panel voltagesBattery and solar panel currentBattery state of chargeAccumulated charge and discharge energyMinimum/maximum recorded voltageTemperature (of the controller, or of the battery using an optional external temperature sensor) This meter allows you to change battery type and capacity, temperature unit, and track and reset the accumulated energy counter.CompatibilityThis meter is only compatible with DM series dual battery MPPT solar controllers:High efficiency 10A dual battery MPPT solar charge controller with LCD display for solar panels up to 130W (12V battery system) / 260W (24V battery system)High efficiency 20A dual battery MPPT solar charge controller with LCD display for solar panels up to 260W (12V battery system) / 520W (24V battery system)High efficiency 30A dual battery MPPT solar charge controller with LCD display for solar panels up to 390W (12V battery system) / 780W (24V battery system) If you already have one of our DM series dual battery MPPT solar controllers, this remote meter can easily be added at any time to your system - simply connect the cable supplied with the meter to the RS485 socket of the controller.The removable frame allows for either flush or surface mounting. Specifications: Suitable for 10A-30A dual battery MPPT solar charge controllers DM Series Self-consumption: 4-13 mA (depending on backlight) Operating temperature: -20C to +70C Cable: RS485, 5m included Size (without frame): 98.4 x 98.4 mm (with frame): 114 x 114 mm Weight: 110g

...Read more View Product

£228.99

120W 12V/24V Waterproof Portable Folding Solar Panel Without Solar Charge Controller

120w 12v/24v Portable Folding Solar Panel without a Solar Charge Controller This high quality, waterproof 120W portable folding solar panel is designed to provide free power for charging 12V/24V batteries, for example in vehicles and boats (motorhome, caravan, camper, narrow boat, yacht etc) or any other system with a 12V/24V battery or battery bank. This is the ideal solution for experiencing the benefits of solar without the permanency of a mounted solar panel, as this panel can be folded and stored away when not in use. Features: Adjustable aluminium stand, handle and latches 5m solar cable Padded Storage / protective case The solar panel is completely waterproof, so the unit can be used in all weather conditions The high efficiency (60W + 60W) mono-crystalline solar panels are made of high quality German solar cells These German manufactured, high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available. Provided without a Solar Controller This folding solar panel is supplied without a solar charge controller, to offer the flexibility to choose the controller best suited to your application. You can use your existing solar charge controller with this panel or it can be paired with any of our solar charge controllers. This folding panel also allows you to remotely mount a solar charge controller in a convenient location for easy monitoring and quick access. This folding panel can be easily connected to one or more similar folding panels if necessary. The entire system can then be connected through a larger solar charge controller to increase the energy yield. The folding portable solar panel comes with 5m (bare ended) solar cable to connect the panel to your choice of solar charge controller. The design incorporates a stand which is easy to set up and adjust, while the handle and latches ensure ease of storage and portability. The storage case included with the panel is made with a layer of foam which provides protection for the glass and the frame, and prevents any accidental damage. In addition to this, the solar panels’ corners are protected by plastic shields, which reduce the risk of damage. Specifications: Peak power: 120W Maximum power voltage: 17.5V Maximum power current: 6.86A (2 x 3.43A) Open circuit voltage: 21.6V Short circuit current: 7.4A (2 x 3.7A) Power allowance: +/- 3% Cable: 5m 4.0mm2 single core solar cable Dimensions: 51 x 77 x 7 cm (folded) Weight: 12.8kg This product is covered by a 1 year workmanship warranty. In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells. Advantages of Portable Solar Portable solar panels have quickly become a popular option for those looking to harness the power of the sun while on the go. These panels offer a number of advantages over traditional, fixed solar panels, making them a great choice for a wide range of applications. First and foremost, the most obvious advantage of portable solar panels is their portability. They can easily be transported and set up wherever you need them, which makes them ideal for camping, RVing, boating, and other outdoor activities. This portability allows you to harness the power of the sun no matter where you are, providing you with reliable and sustainable power sources. Another major advantage of portable solar panels is that they are easy to install. Unlike traditional, fixed solar panels, which often require professional installation, portable solar panels can be set up by just about anyone. This makes them a great option for people who are on a tight budget, or who want to avoid the hassle of professional installation. In addition to being portable and easy to install, portable solar panels are also highly efficient. They use advanced technology to track the sun and optimize power output, which helps to ensure that they are producing as much power as possible. This efficiency means that even small portable solar panels can produce enough power to meet the needs of most portable devices, making them a great choice for powering laptops, tablets, and other electronic devices. Lastly, portable solar panels are also very cost-effective. They are often less expensive than traditional, fixed solar panels, which can make them an attractive option for people who are on a tight budget. Overall, portable solar panels are an excellent choice for anyone looking to harness the power of the sun while on the go. They are portable, easy to install, highly efficient, and cost-effective, making them a great choice for a wide range of applications. Whether you're camping in the wilderness, boating on the open water, or just looking for an alternative power source, portable solar panels are a great option to consider.

...Read more View Product

£175.99

120W 12V Solar Panel With 5M Cable (German Solar Cells)

We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This high efficiency, waterproof 120W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system or 4mm extension cable. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller.The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.If you are planning to use this solar panel to charge a 12V battery or battery bank: please note this panel requires a solar charge controller / regulator to charge a 12V battery. To view the full range of solar charge controllers we offer, please visit the Solar Charge Controllers category of our online shop. Solar panel specifications: Peak power: 120W Maximum power voltage: 20.2V Maximum power current: 5.94A Open circuit voltage: 23.9V Short circuit current: 6.31A Power allowance range: +/- 3% Dimensions: 100.5 x 67 x 3.5 cm Weight: 8.3 kg 4 mounting holes 9 x 14 mm 2 x 5m of high quality single core solar cable 4.0mm cross section Male and female MC4 connectors

...Read more View Product

£289.99

130W black narrow semi-flexible fibreglass solar panel with durable ETFE coating

this highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This high efficiency 130W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Unique narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 505mm wide) Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) Black backing makes the solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces The panel is incredibly light (only 2.38kg) and very thin (just 3mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 130W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 9-busbar solar cells: This panel also features new generation 9-busbar solar cells, which are more efficient than the 2, 3, 4, or 5-busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. All-black design: This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 130W Maximum power voltage: 20.9V Maximum power current: 6.22A Open circuit voltage: 24.4V Short circuit current: 6.53A Dimensions: 1460 x 505 x 3 mm Weight: 2.38 kg This product comes with a 3 year workmanship warranty

...Read more View Product

£249.99

Campervan & Motorhome Water System Starter Kit

Campervan & Motorhome Water System Starter Kit Our campervan water system premium bundle includes the following items 1 x Shurflo 12V 30PSI 10L water pump 1 x Shurflo 30PSI Accumulator 1 x Shurflo filter 2 x W4 Fittings to 1/2” BSP female thread 1 x 1/2" BSP Bridge Connector 12mm Red water hose x 5m 12mm Blue water hose x 5m W4 Equal Tee 12mm x 2 W4 Tube Supports x 12 W4 Equal Elbow x 6 W4 Collet Clip Red x 10 W4 Collet Clip Blue x 10 W4 Water Tank Fitting Assembly x 1 W4 Water Shut Off Valve x 1

...Read more View Product

£99.00

AMT12-2 Trickle Charger

AMT12-2 Trickle Charger charges Vehicle Battery from Leisure Battery with Solar Charger /Mains Hookup or only a Secondary Battery Part Number: AMT12-2 The AMT12-2 has many names Trickle Charger, Battery Maintainer, Battery Saver, Reverse Charger, Top Up Charger, Battery Equaliser, Battery to Battery trickle charger and its purpose is to keep a Source / Vehicle Battery charged & protected from damage during prolonged periods of Vehicle, Boat & Motorhome inactivity or storage. The charger feeds a low current into the Source Battery to compensate for self discharge, alarm & tracker loads while ensuring the charge of the Auxiliary / Leisure Battery is maintained. In the ideal scenario a Solar Charger or Mains Charger is attached to an Auxiliary / Leisure Battery to protect it from damage during a period of inactivity . The Trickle Charger draws a small current off to maintain the Vehicle / Source Battery. The Trickle Charger also feeds charge from the Auxiliary Battery to the Vehicle Battery until they reach 11.5V and 11.7V respectively ensuring that both Batteries are kept as healthy as possible even if no Solar Charger or Main Charger is present. For Lithium batteries the voltage thresholds for this function are set at 1V so 11.5V and 12.5V are the minimum operating voltages . The unit has 8 User selected programmes and so is suitable for use with any Auxiliary Battery Charging System including a simple Voltage Sensing Relay and a Battery to Battery Charger. A ABB-007 bluetooth module allows the unit to be configured to specific user settings to cater for different battery types and specific user requirements . All that is required is to download the app from the Apple store or google play and make the desired settings changes It does not matter the Make or Type of Charger the AMT12-2 will Charge the Vehicle Battery from the Leisure Battery . The clever software means it is compatible with conventional Alternator Vehicles, the latest Stop / Start & Euro 5/6 & Regenerative Braking Technologies. The unit has a low current draw of less than 2mA on a 12V system & so presents a very small discharge load to the Vehicle & Leisure Battery. At 1Ahr drain every 20 days the unit has negligible effect on the Battery Capacity and should easily cover the winter storage period. When a charging source either a Mains Charger or a Solar Charger is connected to the Auxiliary / Leisure Battery the AMT12-2 Trickle Charger allows a maximum of 4A (Usually considerably less) to flow from the Leisure Battery to the Vehicle Battery thus ensuring the Leisure Battery is Charged first and the Vehicle Battery second. The AMT12-2 works with all types of Lead Acid Batteries & Lithium Batteries, The Status Led gives feedback on the Trickle Charger Operation , State of Charge of the Vehicle Battery and Auxiliary Battery Conditions. There is Ignition Override Switch Enable to allow the user to externally control the charging if for some reason they wish to override the automatic settings. The AMT12-2 Trickle Charger works on 12V & 24V Battery Systems, Automatically detecting whether it is connected to a 24V or 12V system. The compact potted plastic enclosure mean it is easily fitted next to the Auxiliary Battery Charger and connected by 3 Faston connections. The Inbuilt Fuse Protection means the Installation is extremely quick and easy.

...Read more View Product

£37.58

Blue Sea 5116 Fuse A3T/Class T 200A

Extremely fast short-circuit response. 20,000 Ampere Interrupt Capacity (AIC)

...Read more View Product

£242.99

Filax 2 Transfer Switch CE 230V/50Hz-240V/60Hz

The Filax 2 has been designed to switch sensitive loads, such as computers or modern entertainment equipment from one AC source to another. The priority source typically is the mains, a generator or shore power. The alternate source typically is an inverter. With its switching time of less than 20 milliseconds, sensitive loads will continue to operate without disruption. The Filax is not intended to supply high power household equipment like washing machines or electric motors. Open transition transferThe Filax is an open transition (break before make) transfer switch.The maximum load transfer time is 16ms.The load is normally supplied by the priority source, and is transferred to the alternate source if:– The voltage of the priority source drops below the threshold value.– The frequency of the priority source drops below the low frequency threshold value, or increases beyond the high frequency threshold value.Reverse transfer from the alternate source to the priority source is initiated when the priority source has operated within the voltage and frequency reverse switching limits during 30s. Brand Victron Energy Manufacturer Part Number SDFI0000000 gtin 8719076025672 Max. Current 16 A Ingress Protection IP65 Dimensions (Including Terminals) H120 x W255 x D75mm Weight (kg) 0.8 Warranty 5 Years

...Read more View Product

£449.99

350W MCS certified semi-flexible solar panel top junction box

The FMCS-350M is a cutting-edge 350W MCS-certified semi-flexible monocrystalline solar panel that redefines efficiency and adaptability. Built with 182mm silicon wafers, PERC technology, and half-cut cells, this panel maximises power output while reducing energy losses. Its innovative design ensures exceptional durability, lightweight construction, and superior performance, even in challenging conditions. Perfect for curved rooftops, weak load-bearing surfaces, and corrugated metal roofs, the FMCS-350M is the ideal solution for residential, commercial, and industrial solar applications. Advanced energy efficiency With an advanced combination of PERC and half-cut cell technology, the FMCS-350M achieves superior energy conversion efficiency, ensuring maximum power output from every module. By minimising adaptive losses, this panel optimises energy generation, making it a high-performance choice for solar installations in various environments. Exceptional power-to-weight ratio & versatile installation Designed for ease of installation and adaptability, the FMCS-350M is exceptionally lightweight at just 4.1kg per unit area, making it 70% lighter than conventional solar panels. Despite its ultra-lightweight construction, it delivers an impressive 200W per square meter of installation area, making it ideal for surfaces with low load-bearing capacity, such as corrugated metal roofs, coal sheds, and curved rooftops. Enhanced performance in shaded conditions with integrated junction box diodes The FMCS-350M features a junction box equipped with three bypass diodes, ensuring optimal performance and reliability in various conditions. The integrated diodes mitigate the risk of hot spots caused by shaded or damaged cells, protecting the panel from potential long-term damage. By allowing the panel to continue generating electricity efficiently, even when partially shaded, the diodes enhance total energy production. In scenarios where only a portion of the panel is shaded, the bypass diodes help maintain consistent power flow, preventing significant energy loss. By reducing thermal stress and preventing excessive heat build-up, the diodes contribute to extending the overall durability and lifespan of the panel. When connected in series, the bypass diodes ensure that shading on one panel does not significantly impact the performance of the entire solar array. Built for extreme durability MCS certification guarantees that this solar panel is designed for durability. It has undergone rigorous weather testing and is built to withstand harsh environmental conditions. The panel is resistant to sand, dust, acid, alkali, and salt mist corrosion, making it suitable for installations in extreme climates. Additionally, its anti-PID (Potential Induced Degradation) and hail shock resistance further enhance its longevity and reliability. Long-term reliability & warranty protection For long-term peace of mind, the FMCS-350M comes with a 5-year quality and performance guarantee for vehicle/boat installations and 10-year for roof installations, along with a 25-year linear power output warranty, ensuring reliable and efficient energy generation for decades. The FMCS-350M semi-flexible solar panel is the perfect combination of innovation and efficiency, offering superior performance in any environment. Whether for residential, commercial, or industrial applications, this high-efficiency panel provides a reliable, sustainable energy solution for years to come. Solar panel specifications: Peak power: 350W Maximum power voltage: 27.47V Maximum power current: 12.75A Open circuit voltage: 33.17V Short circuit current: 13.70A Protection: IP68 Dimensions: 1571 x 1137 x 3.4 mm Weight: 7.4 kg 2 x 0.3m of 4.0m² solar cable attached This product is covered by a 5 year workmanship warranty for vehicle/boat installations and a 10 year warranty for roof installations

...Read more View Product

£219.99

100W Semi-Flexi Solar Panel Black Rear Exit

Welcome to our 100W semi-flexible solar panel with a rear cable exit. This panel, like the rest of our SolarGo2 panels, is built to last with a strong ETFE diamond surface and a polymer composite material back face. It includes the latest generation A-grade monocrystalline solar cells and 5 meters of high-end 2.5mm² UV stable DC cable making sure you get the best transmission of power from your panel to your controller. This is our 2nd generation of the SolarGo2 semi-flexi panel and is designed to flex more along the long edge giving you the ability to install on tighter curves without the fear of damaging the panel. Designed to last in an outside environment for years to come whether it is on top of a motorhome roof, a caravan or even a boat out at sea, this panel will work in all weather conditions. The SolarGo2 semi-flexible 100W panel is installed as a bottom exit system with a small simple cable exit on the rear of the panel allowing you to thread the cable into the roof, giving you a great-looking stealthy install on the top of your surface with no trip hazards. The new flexibility of this 2nd generation solar panel means you can “bend” the panel along its longer length by up to 40 degrees! This 100W panel is designed to be outside and work in all weather conditions, providing you with variable amounts of power throughout the year depending on the weather conditions and the time of year. As an example, we would say it will give you an average of around 33Ah (600Wh) per day in the summer in the UK and 4.4Ah (80Wh) per day in the winter. This panel will require a charge controller if being connected to a 12v battery. This panel will require a charge controller if being connected to a 12v battery. Type Monocrystalline (A Grade, 158.75mm, High efficiency) Peak power (Pmax) 100Wp Power tolerance range (%) ±3% Open circuit voltage / Voc (V) 21.4V Max. power voltage / Vmp (V) 18.2V Short circuit current / Isc (A) 5.93A Max power current / Imp (A) 5.5A Maximum System Voltage (V) 200V DC Above Specification at standard test conditions(STC):1000W/㎡, cell temperature 25°C, AM1.5 Panel Info Part number SPF100R Power 100Wp Cable type 2.5mm twin core Red / Black (UV stable) Cable length 5m Frame Material N/A Face material ETFE Dimensions (mm) 990 x 540 x 3mm Performance UK weather (weather dependant) Average expected winter 4.4Ah (80Wh) per day (0.8h) Average expected Summer 33Ah (600Wh) per day (6h) Warranty Performance (of cells 20 years (at 80% of day 1 performance) Product construction 3 Years

...Read more View Product

£128.99

100A Eastron SDM630-Modbus V2 energy meter for self-consumption applications & hybrid inverters

The SDM630-Modbus V2 energy meter measures and displays the characteristics of single phase two wires (1p2w), three phase three wires (3p3w) and three phase four wires (3p4w) supplies. It features a highly visible LCD and a user-friendly navigation menu to display the measured voltage, frequency, current, power and imported/exported/total energy. The energy is measured in terms of kWh and kVArh. It supports a maximum direct connection of 100A, which means that you do not need to connect an external current transformer for this energy meter to operate. This makes it cost effective and less complex to use than other energy meters. The built-in interfaces provide two pulse outputs, one of which is configurable, indicating the real-time energy measurement, and an RS-485 Modbus output for communication using the Modbus RTU protocol. Specifications: Dimensions: 72 x 100 x 66 mm Weight: 0.32 kg Operating temperature: -25°C to +55°C Communication/Pulse wiring terminal: 0.5 - 1.5 mm2 Load wiring terminal: 4 - 25 mm2 Relative humidity: 0 to 90% (non-condensing) Altitude: up to 2000m

...Read more View Product

£479.99

165w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT

165w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop-top roofs) Highly efficient Cells with a Durable ETFE Coating This 165w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 165w Semi-Flexible Durable Solar Panel Dimensions: 1500 x 660 x 2.5 Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) Double entry Roof Gland 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 5-year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar panel specifications: Fully waterproof and light weight design at just 3.2kg Low profile with a thickness of just 2.5mm Semi-flexible with up to 20° flexibility Attractive black finish with 1.5 metre cable High-efficiency levels 5-year warranty Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). MPPT Specifications The Victron 75/15 MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£618.99

Victron 520W Monocrystalline Solar kit with SmartSolar 150/35 MPPT, Mounts, Cables & MC4s

520W Victron Energy Mono Solar Panel Kit - Perfect for Campervans, Motorhomes & Boats Panel sizes are 1020x668x30mm This 520w Large Solar Panel Kit is designed for off-grid, campervans, motorhomes, and yachts/boats. The included Victron SmartSolar MPPT 150/35 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes, and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit with Victron 4 * 130W Monocrystalline panels, 4 * fixing brackets (optional) , Cable entry Gland, Victron SmartSolar Bluetooth enabled 150/35 MPPT charge controller, 5m of Black PV Extension Cable s(x2) with MC4 Connectors, 1 x Resettable Circuit Breaker, 1 x MPPT to Battery Cable set with in-line fuse. Mounts available (optional): 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets This highly efficient Victron solar 520w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds, and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Wiring guide for Solar Panel Kits in Series

...Read more View Product

£186.99

Victron Energy Orion-Tr 12/24V 15A (360W) Isolated DC-DC Converter – ORI122441110

Remote on-offThe remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual) Adjustable output voltage: can also be used as a battery chargerFor example to charge a 12 Volt starter or accessory battery in an otherwise 24V system All models are short circuit proof and can be paralleled to increase output currentAn unlimited number of units can be connected in parallel IP43 protectionWhen installed with the screw terminals oriented downwards Screw terminalsNo special tools are needed for installation. Input fuseOn 12V and 24V input models only. Brand Victron Energy Manufacturer Part Number ORI122441110 gtin 8719076038832 Voltage 12/24V Cont. Output Current 15A Protection Category IP43 Efficiency 88% Bluetooth Enabled No Dimensions H130 x W186 x D80mm Weight 1.8Kg Warranty 5 Years

...Read more View Product

£202.99

30A 12V Dc To Dc Split Charge Kit For Lead Acid, AGM, Lithium Batteries - FULL KIT

30A 12V Dc To 12V Dc Compact Automatic Multi-stage Battery-to-battery Charging Kit for Lead Acid, AGM And Lithium Batteries. Kit consists of: 30A DC to DC charger16mm cable (select length of cable required - Starter Battery to Leisure Battery)D+ Cable2 x Midi Fuse Holders2 x 60amp Midi Fuses This 30A compact DC-DC Battery Charger is fully automatic and ideal for leisure vehicles, commercial and special purpose vehicles, boats, and any other systems with multiple 12V batteries or power sources. The charger operates using an adjustable three-stage charging programme and is suitable for Lead Acid, AGM, Gel, LiFePO4 and Lithium-ion (NCM) batteries. The product is compact, lightweight and features high frequency switching and buck-boost power conversion technology for reliable, consistent performance. Key Features: Fully automatic, high-frequency, multi-stage charging: ensures the battery is charged safely and quickly. Pulsed charging keeps temperatures low and evens electrolyte consistency to ensure a long battery life. Easy battery type selection: with the use of dip switches, the unit can be switched between Lead Acid, AGM, Gel, LiFePO4, or Lithium-ion battery types. Safe unattended charging: the unit features inbuilt safety functions (protection against overload, overheating, overvoltage, over-discharge, short circuit, and reverse discharge of the battery), which allow the charger to be left permanently connected to the batteries for unattended automatic charging. Advanced temperature protection and compensation: When paired with an optional external (sold separately), the charger provides advanced temperature protection for Lead Acid batteries. The battery will be charged at varying voltages to compensate for voltage loss during temperature changes. Data monitoring: the charger includes ports for a remote meter or a Bluetooth module (both sold separately), allowing data to be viewed on an LCD display or through a mobile phone app when connected. Continued charging during battery/load use: the charger will continue to operate at full power whilst energy is drawn from the battery during use. The unit will maintain the charge if the battery is already at full capacity. Any 12V loads may also be left permanently connected and running whilst the DC-to-DC charger is in operation, and will be protected against overvoltage and voltage fluctuations. Ignition on/off control: by connection to the ignition control through the D+ terminal, this charger can be set to begin battery-to-battery charging immediately when vehicle ignition is turned on and stop charging when the vehicle is turned off. Wake-up function for Lithium batteries: When the Battery Management System (BMS) of a lithium battery goes into the protection mode, the charger can automatically activate the BMS and continue charging the lithium battery. Additional Features: This charger utilises adaptive charging routines that will measure the voltage of the source battery throughout the charging process and gradually adjust the charging current to prevent over-discharging the source battery. As the source battery recovers the charging current will also gradually increase as well. If the voltage of the source battery drops too low then the charging current will be stopped until the source battery has reached the recovery voltage. The charger includes 4 LED indicators to display the battery charging stage and troubleshooting for faults. Compatibility: This DC-to-DC battery charger is suitable for use with 12V lead acid, AGM, Gel, LiFePO4 and Lithium-ion (NCM) batteries. It is incompatible with 24V batteries or a combination of 12V and 24V batteries. Specifications: Source battery voltage: 12V Battery input voltage: 10.5V - 16V Effective D+ signal voltage range: 8V - 16V Maximum charging power: 390W Maximum charging current of target battery: 30A Minimum recommended source battery capacity: 60Ah Target rated voltage: 12V (Lead acid, AGM, GEL), 12.8V (LiFePO4), 11.1V (Li-ion) Target battery capacity: 45Ah - 280Ah Target battery operating voltage range: 8V - 16V Bulk charge voltage: 14.7V (AGM), 14.3V (GEL) 14.4V (Lead Acid), 14.4V (LiFePO4), 12.6V (Li-ion) Float charge voltage: 13.5V (AGM), 13.8V (GEL) 13.5V (Lead Acid), 13.8V (LiFePO4), 12.5V (Li-ion) Temperature compensation: -3mV/°C/2V Operating temperature: -20°C to 50°C Self-consumption current: 17mA Weight: 0.46kg Dimensions: 147 x 142 x 41mm

...Read more View Product

£1,126.08

Transporter, Transit Custom - Full Electrical Off-Grid Camper conversion kit Ideal for Smaller Installations

Full Electrical Off-Grid Campervan conversion kit - Ideal for smaller vans such as a Transporter or Transit Custom 185w of Solar (rigid glass panel)105ah Fogstar Drift Lithium Battery30amp Merlin Power Hybrid DC to DC ChargerNo Inverter This full electrical conversion kit is designed for the smaller van conversion. The combination of the large 105ah Lithium battery, 185w of solar and the battery-to-battery charging system will give you enough off-grid independence for long weekends away. Our kits can be expanded or altered as required so if this kit doesn't achieve exactly what you are looking for give us a ring for a friendly chat. Our free Campervan and Motorhome Electrical & Solar Design Service will ensure the kit you receive is exactly what's required. Our Full Electrical & Solar Conversion Kit Contains: Victron 185W Monocrystalline Solar panel with mounts & cables Fogstar Drift 12V 105Ah LiFePO4 Leisure BatteryMerlin Power DMT1230 30amp Hybrid MPPT / DC to DC ChargerVictron Energy Fuse holders for MEGA-fuses – CIP000100001Victron Energy - Battery switch ON/OFF 275A - VBS127010010Battery Cable 16mm High Quality Extra Flex CableBattery Crimp Cable Lugs 8mm Hole for 16mm Cable (Sold in 1's)Mega FusesBlue Sea 5026 BS5026 Fuse Block ST Blade 12 CircuitsBattery Cable 10mm 70 amp High Quality Extra Flex CablePositive & Negative Busbar • Fogstar batteries come with a 10-year manufacturer warranty • Wiring Diagrams and installation guides available after purchase • As much after-sales support as is required (email, phone, live chat) • All products are in stock and available for delivery within 2 working days

...Read more View Product

£159.00

Clayton Power – LPS II – 5m Cable Set For Alternator

LPS II Cable Set for wiring up your Alternator charging. The 5m cable kit consists of everything you need to install the LPS into the standard 12V set up within a vehicle. The cables and fuses included in the kit are wired into the DC in and C1 connection points at the back of the LPS unit.

...Read more View Product

£529.99

Indel B Cruise 49L Compressor Fridge

Indel B Cruise 49 refrigerator is deeper than the standard Cruise 42 model but with the same frontal measurements. This 49-litre unit features a wire shelf dividing the fridge into two, a small freezer compartment, an adjustable thermostat, inner light and two inner door balconies. The fridge can hold bottles in the vertical and horizontal position. A new simple "easy-fix" rapid installation mounting mechanism for vans has been added to the 2022 Cruise line. With new inox interior elements, the contemporary design is both useful and practical. • Total capacity: 49 Litres • Dimensions: 530 x 380 x 495mm (HxWxD) • Weight: 16.6kg • 60 Watt • Consumption: 12-24V DC / 0.278 kWh/24h • Voltage DC: 12-24V

...Read more View Product

£975.99

330w Pro Flexible Solar Panel Kit with Victron SmartSolar MPPT 100/30

330w Semi -Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/30 - (These kits are perfect for pop top roofs) Highly efficient German Cells with a Durable ETFE Coating Our flexible solar panel complete kit is suitable for many vehicle types, boats, and off-grid applications. Kit Contents 330w Semi-Flexible Durable Pro Solar Panel 2035 x 1020 x 2 mm Victron Energy SmartSolar MPPT 100/30 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) Double entry Roof Gland (Black or White) 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 2 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar Panel Specifications: This high efficiency, waterproof 330W semi-flexible solar panel is the largest semi-flexible solar panel available on the UK market. It is perfect for permanent outdoor use to provide free electricity for charging 12V or 24V batteries to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners or even zipping.Product features:Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditionsRobust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel that can be walked onIncredibly light (only 6.82kg) and very thin (just 2mm) which is great for motorhome and caravan roofsHigh resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified.The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter).The fibreglass plastic used in this solar panel is very strong and durable. When the solar panel is mounted on to a rigid surface, it is possible to walk on the solar panel in soft shoes (to prevent accidental scratches), which makes it the perfect choice for mounting on a boat deck.The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 connectors which can be used for easy connectivity to your existing system, linking several panels together or for connecting 4mm extension cable. Solar panel specifications: Peak power: 330W Maximum power voltage: 39.1V Maximum power current: 8A Open circuit voltage: 47.7V Short circuit current: 9.0A Dimensions: 1917 x 1020 x 2 mm Weight: 6.82 kg MPPT Specifications This Victron 100V 30A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device.Ultrafast MPPT Technology:This 30A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse current, PV reverse polarity and battery reverse polarity. The internal temperature sensor also protects the battery from overheating and will activate power derating if excessive temperatures are detected. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery, as well as 30 day performance data. The user can also specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 100/30 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Inbuilt bluetooth- Max solar panel voltage: 100V- Max solar panel power: 440W (12V) / 880W (24V)- Temperature sensor for automatic compensation (-16mV °C resp. -32mV °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 10mA- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 186 x 130 x 70 mm- Mounting dimensions: 175 x 75 mm- Weight: 1.3kg- 4 x mounting holes for ease of installation Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£479.99

Victron SmartSolar MPPT 250/100-Tr VE.Can SCC125110412

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features of the SmartSolar MPPT 250/100-Tr VE.Can MPPT: Ultra Fast Maximum Power Point Tracking By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remote Monitoring and Control Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. Control Your Charger Remotely The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data. Daisy Chain Additional Units The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units. When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device. Remote Monitoring and Control If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s). For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. SmartSolar Control Display The SmartSolar MPPT 250/100-Tr VE.Can charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device. TECHNICAL SPECIFICATIONS Brand Victron Energy Manufacturer Part Number SCC125110412 GTIN 8719076055662 Voltage 12/24/48V Rated Charge Current 100A Nominal PV Power, 12V 1450W Max. PV Short Circuit Current 70A Max. PV Open Circuit Voltage 250V absolute maximum coldest conditions 245V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled Yes Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years

...Read more View Product

£539.99

Topband T Series 12.8V 100Ah Lithium/LifePO4 Battery

TOPBAND battery provides advanced Lithium drop-in battery solution widely used in RV, fishing boats, cleaning machines, golf carts, solar energy storage systems and other fields. Product features Wide operating temperature range, supports low temperature heating Equipped with CAN/RS485 interface, can be compatible with various inverters UL1973/UN38.3/IEC/62619/CE certified, safety and quality guaranteed Bluetooth communication function, support Bluetooth APP upgrade firmware 6000+Cycles, 80% DPD 0.2C/0.2C Support multiple series or parallel connections Voltage 12.8V Battery Capacity 100Ah Rated Energy 1.28kWh Internal Resistance(@1kHz AC) ≤20mΩ Charge Voltage 14.0-14.6V Float Voltage 13.6-13.8V Recommended Charge Current 50A Recommended Discharge Current ≤50A Max Continuous Discharge Current 100A Cycle Life ≥6000 Dimensions L318 x W165 x H225mm Weight 10Kg Warranty 5 Years Battery Technology Lithium Battery Application Deep Cycle

...Read more View Product

£660.00

Victron Energy MultiPlus Compact 12V 1600VA 70A 16A VE.Bus – CMP121620000

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. Features Two AC Outputs The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more). Virtually unlimited power thanks to parallel operation Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity. PowerControl – Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist – Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Solar energy: AC power available even during a grid failure The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available. System configuring In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications). On-site Monitoring and control Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232). Remote Monitoring and control Color Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. Remote configuring When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely Brand Victron Energy Manufacturer Part Number CMP121620000 GTIN 8719076021964 Voltage 12V Cont. Output Power at 25°C 1600VA Peak Power 3000W Output AC Voltage 230V Transfer Switch 16A Charge Current House Battery 70A Charge Current Starter Battery 4A Protection Category IP21 Efficiency 93% Bluetooth Compatible No Dimensions H375 x W214 x D110mm Weight 10Kg Warranty 5 Years

...Read more View Product

£303.99

Victron 100W Monocrystalline Solar panel kit with BlueSolar MPPT, Mounts, Cables & MC4

100W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats Panel sizes are 845 x 670 x 30mm This 100w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron BlueSolar MPPT 75/10 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit with Victron 100W Monocrystalline panel, plastic or aluminum mounting brackets, Cable entry Gland, Victron BlueSolar 75/10 MPPT charge controller, 10m of Black PV Cable & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cables with In-Line Fuse. Mounts available: 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets Ideal for charging battery banks up to 250ah This highly efficient Victron solar 100w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£124.99

VSR Kit - Victron Cyrix-Ct 120A kit with all required components

This voltage-sensitive relay kit comes complete with all the necessary components to integrate the Victron Cyrix-ct 120A into your campervan or motorhome's electrical setup. The kit comprises: Victron Cyrix-ct 120A battery combiner 2 x 150A MEGA fuses 2 x Victron MEGA fuse holders Red and black cables - 50mm2 for lengths up to 8m 6mm Control Cables Cable lugs for connections to the starter battery and leisure battery Cyrix-ct 120A Battery Combiner The Cyrix-ct 120A functions as a voltage-sensitive relay, automatically linking your leisure and starter batteries when a specific charge voltage is reached, and separating them when the voltage drops below the float level, indicating discharge. This model is capable of charging a leisure battery at up to 120A/hr. For additional details, refer to our split charge relay explanation. IMPORTANT: The Cyrix-ct battery combiner, a voltage-sensitive relay, is not suitable for vehicles with Euro 5 or Euro 6 engines that utilize a smart alternator. Most vehicles registered post-September 2013 fall under Euro 5 or 6, which you can verify with your V5C document. In such cases, a battery-to-battery charger is recommended. Applications A voltage-sensitive relay (VSR) is only viable in vehicles without Euro 5 or Euro 6 engines and with lead-acid (not lithium) leisure batteries. Intelligent Battery Monitoring Unlike basic relays, the Cyrix-ct 120A employs advanced software to monitor battery voltage trends over time, connecting or disconnecting batteries not just on immediate voltage levels but also considering the direction of voltage change with a specific time delay. This method prevents disconnection during short, high-amperage loads and ensures connectivity with large, discharged battery banks without immediate disengagement due to voltage drop. Overheating Protection The Cyrix disengages in the event of excessive contact temperature and will reengage once it cools down, providing an additional layer of protection for your system.

...Read more View Product

£159.99

Victron Energy Lithium SuperPack 12.8V 20Ah (M5) - BAT512020705

Victron Energy Lithium SuperPack 12.8V 20Ah (M5) - BAT512020705 The SuperPack batteries are extremely easy to install, not needing any additional components.The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. The batteries can be connected in parallel. Series connection is not allowed. Features Integrated BMS and safety switch The SuperPack batteries are extremely easy to install, needing no additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. Abuse proof A lead-acid battery will fail prematurely due to sulfation: If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged). If it is left partially charged or worse, fully discharged. A Lithium-Ion battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of Li-ion compared to lead-acid. The SuperPack batteries will cut-off the charge or discharge current when the maximum ratings are exceeded. Efficient In several applications (especially off-grid solar), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%. The round-trip energy efficiency of a Li-ion battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy are required (battery operating in 70% to 100% charged state). In contrast, a Li-ion battery will still achieve 90% efficiency even under shallow discharge conditions. Can be connected in parallel The batteries can be connected in parallel. Series connection is not allowed. Use in upright position only. Brand Victron Energy Manufacturer Part Number BAT512020705 gtin 8719076047537 Voltage 12.8V Battery Capacity (C20) 20Ah Terminal Type M6 Terminal Layout Right Hand Positive Dimensions (Including Terminals) H167 x W181 x D77mm Weight 3.5Kg Warranty 3 Years Battery Technology Lithium Battery Application Deep Cycle Country of Manufacture China

...Read more View Product

£3.99

Straight Reducer 12-8mm W4 31228

Straight Reducer 12-8mm W4 31228 Push-Fit Hose Connector. Straight Reducer 12-8mm Click here to view all W4 Water Fittings

...Read more View Product

£59.99

Blue Sea 4 Position with 12V Sockets, BelowDeck Circuit Breaker Panel - BSS4351

Blue Sea 4 Position with 12V Sockets, BelowDeck Circuit Breaker Panel - BS4351 DURABLEMolded panel frame will stand up to UV and salt airEASYLow profile makes it easy to install in tight spacesSIMPLEFast-on circuit breaker connectors make it quick to wireCONVENIENTRed “ON” indicating LEDs for safe operation in low light conditions 4 Carling Technologies™ 15A circuit breakers with 2 sockets Illuminated ON indication Polycarbonate/ABS panel surface is UV-stabilized, flame retardant, and will not corrode Quick connect BUS eliminates wire harness and clutter contributing to a low profile panel Two-wire connection for powering all panels is simple and requires #10 ring terminals. Terminals screw to bus bars for secure connections Set of 15 square format circuit labels are included, and are easy to replace. Additional standard or custom labels are available through Blue Sea Systems Stainless steel #6 x 5/8″ mounting screws included Specifications Positions 4 Nominal Voltage 12V DC Maximum Amperage 45A Terminal Type 1/4″ Male quick connect Hardware Stainless Steel #6 x 5/8″ mounting screws Ring Terminal Size M5 (#10) Height 6.5in (165.1 mm) Width 4.5in (114.3 mm) Depth 1.75in (44.45 mm)

...Read more View Product

£405.99

Budget 100w Flexible Solar Panel Kit

Kit Contents 100w Semi-Flexible Durable Solar Panel Victron Energy BlueSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) Double entry Roof Gland 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 2 year warranty on the Solar Panel 5 year warranty on Victron MPPT 100w Flexible Solar Panel Specifications: Peak power: 100W Maximum power voltage: 18.2V Maximum power current: 5.50A Open circuit voltage: 21.1V Short circuit current: 5.82A Dimensions: 990 x 540 x 2 mm Weight: 1.90 kg MPPT Specifications: Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on Victron for details. Day/night timing and light dimming option See the software section on Victron for details. Programming, real-time data and history display options – Color Control GX or other GX devices: see the Venus documents on our website. – A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC010010050R GTIN 8719076025306 Voltage 12/24V Rated Charge Current 10A Nominal PV Power, 12V 145W Max. PV Short Circuit Current 13A Max. PV Open Circuit Voltage 75V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H100 x W113 x D40mm Weight 0.5Kg Warranty 5 Years

...Read more View Product

£374.99

Victron Energy AGM Dual Purpose Battery 12V 165Ah – BAT412151084

The Victron Energy 12V 165Ah AGM battery has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches. Features of the 12V 165Ah AGM battery Sealed (VRLA) AGM BatteriesAGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of high currents than gel batteries. Low Self-DischargeBecause of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C.Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions. Exceptional Deep Discharge RecoveryVictron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge.Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries,Victron batteries are no exception. Battery Discharging CharacteristicsThe rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C.The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge.The effective capacity decreases with increasing discharge current. Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter. Looking to protect the battery against excessive discharge, the BatteryProtect is just what you are after. Learn more about batteries and battery chargingTo learn more about batteries and charging batteries (including the pro’s and cons of multi-bank charging and intelligent charging), please refer to Electricity on Board. Want to improve battery charging? Why not take a look at the Victron Energy Battery Sense which measures voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided – guaranteeing the correct charge-voltage. Brand Victron Energy Manufacturer Part Number BAT412151084 GTIN 8719076037033 Voltage 12V Battery Capacity (C20) 165Ah Cold Cranking 600CCA Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) L485 x W172 x H240mm Weight 47Kg Warranty 2 Years Battery Technology AGM Battery Application Deep Cycle Country of Manufacture Vietnam

...Read more View Product

£229.99

Victron BMS Smart Battery Management System 12/200 - BMS210055000

Smart BMS 12/200 The Smart BMS 12/200 is an all-in-one Battery Management system for Victron Lithium-Iron-Phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator such as in vehicles and boats. It combines a Current Limiter, Battery Combiner and Battery Protector in a robust and compact solution and lets you safely connect any size 12V alternator (and starter battery), loads and chargers to Smart Lithium batteries. The Smart BMS 12/200 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources or DC loads in case of low battery cell voltage, high battery cell voltage or over temperature. The dedicated alternator connection provides current limiting and one-way traffic from the alternator into the battery, this so any size alternator (and starter battery) can be safely connected to the Smart Lithium battery (or battery bank) and the starter battery is protected from excessive discharge. The BMS is equipped with Bluetooth for monitoring and configuration, a remote on/off connector, to turn the BMS (and the system) off via a remote switch and a pre-alarm contact, to give a warning signal before the BMS will disconnect the batteries from the system. The BMS is also equipped with a remote on off connector, to turn the BMS (and the system) off via a remote switch. Features of the - Victron Energy Smart BMS CL 12/100 The Smart BMS CL 12/100 is a Battery Management system for Victron lithium-iron-phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator. The BMS CL 12/100 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources or DC loads in case of low battery voltage, high battery voltage or over temperature. The dedicated alternator input provides current limiting and one-way traffic from the alternator into the battery, this so any size alternator (and start battery) can be safely connected to the Smart Lithium battery or batteries. The BMS is also equipped with a remote on off connector, to turn the BMS (and the system) off via a remote switch, and a pre-alarm contact, to give a warning signal before the BMS will disconnect the batteries from the system. Battery Management system The BMS connects to 12,8V Victron LiFePO4 (LFP) batteries. Up to 5 batteries may be connected in parallel. Can be used as a system on/off switch. Alternator and battery protection The input current is electronically limited to approximately 90% of the fuse rating. A 100A fuse, for example, will therefore limit the input current to approximately 90A. Choosing the right fuse will: a. Protect the LFP battery against excessive charge current (important in case of a low capacity LFP battery). b. Protect the alternator against overload in case of a high capacity LFP battery bank (most 12V alternators will overheat and fail if running at maximum output during more than 5 minutes). Starter battery Protection This function is similar to that of a Cyrix Battery Combiner or Argo FET Battery Isolator. Current can flow to the LFP battery only if the input voltage (= voltage on the starter battery) exceeds 13V. And current cannot flow back from the LFP battery to the starter battery, thus preventing eventual damage to the LFP battery due to excessive discharge. Li-ion battery protection Excessive input voltage and transients are regulated down to a safe level. The Smart BMS CL will stop charging in case of cell over voltage or over temperature. It has three outputs, similar to the miniBMS. Load Disconnect output The Load output is normally high and becomes free floating in case of imminent cell under voltage (default 2,8V/cell, adjustable on the battery between 2,6V and 2,8V per cell). Maximum current: 10mA. The Load output can be used to control the remote on/off input of a Battery Protect, inverter, DC-DC converter or other loads. Pre-Alarm output The pre-alarm output can be used as warning when the battery voltage is low and it will trip shortly before the Load Disconnect output is disabled due to cell under voltage. The pre-alarm output may be used to drive a relay, LED or Buzzer. It can be configured as continuous or intermittent signal. The pre-alarm output is normally free floating and becomes high in case of imminent cell under voltage (default 3,1V/cell, adjustable on the battery between 2,85V and 3,15V per cell). Maximum current: 1A (not short circuit protected) The minimum delay between pre-alarm and load disconnect is 30 seconds. Charge disconnect output The Charger output is normally high and becomes free floating in case of imminent cell over voltage or over temperature. Maximum current: 10mA. The Charger output is not suitable to power an inductive load such as a relay coil. The Charger output can be used to control: The remote on/off of a charger, a Cyrix-Li-Charge relay, a Cyrix-Li-ct Battery Combiner. (Note: in some cases an interface cable will be needed, please see the manual.) Remote on/off input The remote on/off input controls the charging via the alternator. When off, charging via the alternator is disabled, while the BMS functionality will remain active allowing any loads and chargers to continue working regardless of the state of the remote input. When “system on/off switch” is enabled via VictronConnect, the BMS functionality will also be disabled. It consists of two terminals: Remote L and Remote H. A remote on-off switch or relay contact can be connected between H and L. Alternatively, terminal H can be switched to battery plus, or terminal L can be switched to battery minus. Ignition proof No relays but MOSFET switches, and therefore no sparks.

...Read more View Product

£40.74

ROKK Mini Adjustable Body

ROKK Mini is a compact and multi-adjustable mounting system for smart phones, tablets, small fish finders, digital and action cameras and more! Small in size but big on features, ROKK Mini is simply the toughest, most reliable mount for your tech onboard. No compromise. Versatile - A choice of base mounts to install your devices how you want, where you want. More Than a Mount - Designed, not just made. With features that you’ll feel and hear more than you’ll see. Quick Fit / Quick Release - Install your devices instantly onboard. With one reassuring click your tech is both secured and released. Solid Install - A metal-on-metal locking system multiplies your clamping efforts to achieve 100% locking force. Your electronics will never move, until you want them to.

...Read more View Product

£213.49

Victron Energy Orion-TR SMART 24/24-17A (400W) Non-Isolated DC-DC Charger - ORI242440140

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downward. Screw terminals No special tools needed for installation. Input fuse (not replaceable) Brand Victron Energy Manufacturer Part Number ORI242440140 Input voltage range 20-35V Under voltage shut down 14V Under voltage restart 15V Nominal output voltage 24.2V Output voltage adjust range 20-30V Cont. output current at nominal output voltage and 40°C 17A Short circuit output current 40A Cont. output power at 25°C 480W Cont. output power at 40°C 400W Efficiency 89% DC connection Screw Terminals IP Rating IP43 Dimensions H130 x W186 x D80mm Weight 1.6Kg Warranty 5 Years

...Read more View Product

£126.90

Victron Energy SmartShunt IP65 500A – SHU065150050

The SmartShunt IP65 500A is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor. Differences compared to BMV-712 Battery Monitor– No programmable visual and audible alarm– No programmable relay Why should I monitor my battery with the SmartShunt IP65 500A?Batteries are used in a wide variety of applications, mostly to store energy for later use. But how much energy is stored in the battery? No one can tell by just looking at it. The service life of batteries depends on many factors. Battery life may be shortened by under-charging, over-charging, excessively deep discharges, excessive charge or discharge currents, and by high ambient temperature. Monitoring the battery with a battery monitor will give important feedback to the user so that remedial measures can be taken when necessary. Doing this will extend battery life and the battery monitor will quickly pay for itself. The VictronConnect appThe VictronConnect app is essential to set up and to monitor the SmartShunt IP65 500A.The app can connect to the battery monitor via:• Bluetooth• USB, via the optional VE.Direct to USB interface The app is available for the following platforms:• Android• Apple iOS (Note that USB is not supported, it is only possible to connect via Bluetooth)• MacOs• Windows (Note that Bluetooth is not supported, it is only possible to connect via USB). The VictronConnect app can be downloaded from app stores or from the VictronConnect product page. Brand Victron Energy Manufacturer Part Number SHU065150050 GTIN 8719076057895 Protection Category IP65 Bluetooth Enabled Yes Dimensions H46 x W120 x D54mm Warranty 5 Years Country of Manufacture India

...Read more View Product

£18.99

2M Rs485 To Rj45 Cable To Connect A Waterproof Solar Charge Controller To A Remote Display/Wi-Fi Module

This 2m RS485 to RJ45 cable is designed to connect a waterproof solar charge controller to a remote meter or Wi-Fi module to enable monitoring and programming of solar system parameters.The cable is designed for use with the Photonic Universe PU1024BW series solar charge controller which is used in our folding solar charging kits or available separately.This cable connects the solar charge controller to a remote meter or Wi-Fi module in order to monitor various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, etc.In addition, connecting the controller to a remote meter or Wi-Fi module will unlock a range of exclusive settings for the controller; providing far greater control over your solar system. With access to this vast range of charging parameters, the user will be able to:- Amend the battery type and capacity- Select charging volts for different charging stages- Specify the duration of each charging stage- Create a user-defined battery type with charging parameters specific to your battery (if the pre-existing options are unsuitable)- Personalise the 'load' settings - e.g. set timers for lighting, fans, pumps Cable specifications:Cable length: 2 metresConnection: 1 x RS485, 1 x RJ45Compatible with PU1024BW

...Read more View Product

£55.99

High Efficiency 10A Mppt Solar Charge Controller For Solar Panels Up To 130W (12V) / 260W (24V) Up To 100V

MPPT Technology:This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined input solar power allowed for this controller is 130W for a 12V battery system or 260W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full system protection:This charge controller features a comprehensive set of electronic protection functions to ensure the maximum possible efficiency of your solar system. These include: reverse current prevention at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, solar panel over voltage, over load, short circuit and reverse polarity protection. The controller also has self-diagnostic capability and highlights any system errors using advanced fault-targeting technology. Lithium Battery charging:This solar charge controller is compatible with lithium batteries when a lithium battery charging program is selected using PC software (see below for more details).Advanced system monitoring:The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel)Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energyEasy to use buttons allow the user to manually select the battery type (sealed, flooded or gel) and program load settings (e.g. set timers for lighting, fans, pumps etc).Current limiting function (10A) allows the possibility of adding more solar panels to your solar system in the future Multiple connectivity options:This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only). If using the RJ45 to USB cable, the user also has the option to create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and can also set the charging parameters for lithium batteries.Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. (Inbuilt temperature sensor is not enabled for lithium batteries). Controller specifications: The most advanced MPPT technology to ensure high efficiency (>95%) of your solar system Fully automated operation and auto 12/24V selection 3 pairs of terminals (solar panel, battery, load) for wires up to 4mm2 Maximum solar panel voltage 100V Maximum solar panel power 130W (12V) / 260W (24V) Temperature sensor for automatic compensation (-3mV/°C/2V) Comprehensive electronic protection features Communication port: RS485/RJ45 interface Grounding: negative common ground Current limiting function (10A) Self-consumption: <12mA Working temperature: -25°C to +50°C Size: 17.2 x 13.9 x 4.4 cm Mounting dimensions: 13 x 13 cm Weight: 0.57 kg Multiple mounting holes (5mm diameter) for ease of installation

...Read more View Product

£574.99

240W Pro Semi-Flexible Solar Panel - 5-Year Warranty

Now with a 5 year Warranty! This high-efficiency, waterproof 240W monocrystalline solar panel is the one of the largest semi-flexible solar panels available on the UK market. It is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners and even zipping. Product features: Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel that can be walked on Incredibly light (only 4.75kg) and very thin (just 2mm) which is great for motorhome and caravan roofs High resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications 100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified. The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter). The fibreglass plastic used in this solar panel is very strong and durable. When the solar panel is mounted on to a rigid surface, it is possible to walk on the solar panel in soft shoes (to prevent accidental scratches), which makes it the perfect choice for mounting on a boat deck. The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 compatible connectors which can be used for easy connectivity to your existing system, linking several panels together or for connecting a 4mm Cable. Solar panel specifications: Peak power: 240W Maximum power voltage: 25V Maximum power current: 9A Open circuit voltage: 34.9V Short circuit current: 9.7A Dimensions: 1434 x 1020 x 2 mm Weight: 4.75 kg

...Read more View Product

£657.99

160w Flexible Solar Kit with Dual Battery Output MPPT Solar Charge Controller

A dual-battery solar panel charging kit allows 2 separate batteries to be charged at the same time. Typically this is the leisure battery bank and the engine starter battery. A dual-battery solar panel charging kit allows you to leave your Motorhome/Campervan unattended for long periods without the worry of either your van's starter or leisure batteries going flat. Included in the kit: 1 x 160w PRO High-Efficiency Flexible Solar Panel with 5-year warranty1 x 20 amp Dual Output Dual Battery Solar Charge Controller1 x Roof Gland (Black or White)2 x 6mm Battery Cables with 40A Fuse and Ring Terminals - 3m Long1 x Pair Of 5M Single Core Extension Cable Leads with MC4 Connectors1 x Sikaflex 522 Dual Battery Charging MPPT This advanced 20A 12V/24V dual battery solar controller uses advanced MPPT technology to charge two independent batteries or battery banks. The main battery is charged at high power, while a secondary battery is given a trickle charge of up to 1A. This makes it a perfect solar controller for a campervan, motorhome, boat or any other system with 2 batteries (e.g. engine and leisure battery). The main battery will be charged with a majority of the power, whilst the second battery will be trickle-charged to keep it topped up and ready for use. Maximum Power Point Tracking (MPPT) Technology MPPT technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined solar input power allowed for this controller is 260W for a 12V battery system or 520W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel). Full Range of Protection Functions: This charge controller features a comprehensive set of electronic protection functions to prevent reverse current at night (from the battery back to the solar panel), over-charging, short circuit, reverse polarity and more. The solar controller case is water resistant to a rating of IP33 when installed, for protection against sprays of water at up to 60 degrees from vertical. Advanced Battery Compatibility: Unlike many other less advanced solar charge controllers, this model is 100% compatible with a broad range of battery types for the main battery, such as Gel, AGM, Lead-Acid Flooded, and Lithium (LiFePO4 or Li-NiCoMn) batteries. Advanced System Functionality: The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel, system voltage recognition based on secondary battery) Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for the solar panel and each battery), battery state of charge, and accumulated charging energy Easy to use buttons allow the user to manually select the battery type (sealed, flooded, gel or Lithium), change the temperature units, and reset the in-built counters (charging energy, min/max voltages) When not in use, the system automatically goes into a low power mode, reducing standby consumption when there is no solar power available, such as when the vehicle is parked in a garage Current limiting function (20A) allows the possibility of adding more solar panels to your solar system in the future Solar Panel Specifications: This high-efficiency, waterproof 160W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications. The panel is ideal for curved roofs on boats, caravans, motorhomes, RVs etc. because it can easily fit to the shape of the roof when mounted. This panel can be instantly fitted using the peelable adhesive backing attached to the panel, or can also be secured using self-tapping screws, tenax fasteners or even zipping (not supplied). Product features: Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Incredibly light (only 3.3kg) and very thin (just 2mm) which is great for motorhome and caravan roofs High resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications 100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified Peak power: 160W Maximum power voltage: 18.2V Maximum power current: 9A Open circuit voltage: 22V Short circuit current: 9.4A Dimensions: 1434 x 699 x 2 mm Weight: 3.3 kg Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£399.99

NDS Energy Semi Flexible Solar Panel 12V 160W (Front Junction Box) - LSE160BF

NDS Energy Semi Flexible Solar Panel 12V 160W (Front Junction Box) - LSE160BF LIGHTSOLAR is the “Glass & Frameless” range of solar panels designed for applications where weight, thickness and resistance are fundamental characteristics. The cells of these monocrystalline panels, with an efficiency of 18.75%, are embedded in an exclusive multi-layer structure: the upper layer is a plastic polymer called ETFE highly resistant to corrosion and weathering, such that it can be defined as self-repairing. The surface of the panel, always exposed to scratches from tree branches, hail, sharp surfaces or other accidental shocks, is able to self-model, returning to the initial shape ideal for capturing sunlight. The lower layer of the structure is composed by an Alluminum sheet to contain and dissipate as much as possible the heat generated by the cells and to give the panel such strength that it is also perfect for nautical applications, where (with suitable and soft footwear) it is possible to step on the panel. Main Features: Structure - Built with 7 layers, including the ETFE surface, the best surface in terms of efficiency and durability, and an alluminum sheet that tightens it making it more robust and improving the dissipation of heat. Junction Box - The NDS aerodynamic box contains the supplied 3 meters connection cable and the bypass diodes required to reduce shading This special version of LightSolar has a completely flat surface, thanks to the use of a new connection method called Back Junction Box and laminated diodes included in the frame of the panel itself. The position of the connection cable, on the back, eliminates the Junction Box from the exposed surface of the panel. The round box, only 30mm in diameter, tightens the cable, making the connection solid and secure. This version is ideal for pop top roofs, minimizing space requirements, eliminating cable clutter, as well as unsightly and complex cable boxes. Number of cells 36 Nominal voltage 12V Max Power 160WP±3% Size (mm) 1253x673x4 Weight 5,82 Kg Open Circuit Voltage 23,3V Short Circuit Current 8,72A Max power Voltage 19,8V Max power Current 8,08A Length 3m cable 2×2,5mm²

...Read more View Product

£109.99

Wi-Fi Remote Monitoring Kit For Iconica Hybrid Inverters (With Email Communication)

This intelligent Wi-Fi remote monitoring kit uses Wi-Fi connectivity to enable advanced remote monitoring of an Iconica hybrid inverter from any location in the world. The Wi-Fi card collects data from the Iconica inverter and transmits it to the user using the preferred method from the following two options: 1) Short-distance mode: By creating a Wi-Fi network which the user can access from a nearby location (within approx 10-50m radius depending on obstructions) on a mobile device 2) Long-distance mode: By connecting to an existing broadband network, where inverter data is transmitted to an online server, enabling the user to view data from any location via an internet browser. In case of long distance monitoring the data is accessed by logging into an online portal, DataCenter, which features an extensive range of options for monitoring system data. This Wi-Fi kit also has the ability to send email notifications to one or multiple email addresses, alerting the user of alarm events or system reminders. Kit includes: Wi-Fi card and unit (with antenna) DB9 to RJ45 cable for connection to the Iconica inverter Additionally required: Broadband network (only if long-distance remote monitoring is preferred) 12V power supply (mains to 12V DC power adapter) with some inverters This kit is compatible with Iconica hybrid inverters. Please note that Iconica 4KW and 5KW KMS series inverters can power this Wi-Fi remote monitoring kit directly using the RJ45 cable included with this kit. Other Iconica inverters cannot power the kit directly, and a mains to 12V DC power adapter with a 5.5/2.5mm DC power jack connector must be sourced additionally in order to enable operation of this Wi-Fi kit. Online data portal: This Wi-Fi kit intelligently communicates with an Iconica inverter to transmit data to the online portal, DataCenter. After creating a username and password, the user will be able to login from a mobile phone / tablet / PC to remotely view system information. Options for remote monitoring include: - Live in-depth data monitoring: View up-to-date system information (refreshed every 5 minutes) including: PV input voltage, battery voltage, charging current, grid voltage, grid output voltage, AC output power, output load percentage, total AC output (in VA or as a percentage value), nominal rated input voltage / output voltage and frequency / battery voltage - Detailed datalogs: Historical system data and alarm history is recorded and stored indefinitely. It is available to view for any given date range over the inverter's lifespan. The specific time and dates of each recorded value / alarm event are also displayed. - 3D infographics and diagrams: A system status diagram illustrates all connected system components (solar panel, load, battery. For certain Iconica models, bar charts display total generated power (hourly, daily, monthly or annual data). - Regional monitoring: Option to group together and monitor multiple Iconica inverters based on location, allowing the user to view combined data for inverters in a particular region, such as: PV input power, grid voltage and battery capacity percentage. (One Wi-Fi kit required per inverter). - Multiple user access: Option for the administrator to create and manage several accounts for other authorised users to access the online portal and view /program settings for the assigned inverter. Additional users can also receive email status updates. Email notifications: The user can choose to be notified via email when any system faults or warnings are detected. Compatibility: This Wi-Fi remote monitoring kit is designed for use with Iconica Hybrid Inverters It is not suitable for use with any other inverter.

...Read more View Product

£499.99

270w Semi Flexible Solar Panel with Fibreglass Backing and Durable ETFE Coating

270w Semi Flexible Solar Panel with Fibreglass Backing and Durable ETFE Coating - 3 Year Warranty At Van Junkies we love high quality solar products. That's why stock this highly durable semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This high efficiency 270W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 5.00kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 270W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 9-busbar solar cells: This panel also features new generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system, for linking several panels together. Solar panel specifications: Peak power: 270W Maximum power voltage: 24.2V Maximum power current: 11.16A Open circuit voltage: 28.6V Short circuit current: 11.83A Dimensions: 1940 x 710 x 2 mm Weight: 5.00 kg

...Read more View Product

£69.49

Pair Of 20M Single Core Extension Cable Leads 6.0Mm For Solar Panels And Solar Charging Kits

Pair Of 20 Metre Single Core Extension Cable Leads 6.0Mm For Solar Panels And Solar Charging Kits This pair of single core solar extension cables is specially designed for solar panels to carry high current and have negligible power loss. It comes with waterproof MC4 connectors ("male" on one lead, "female" on the other lead) which can be easily connected to similar MC4-type connectors coming with most solar panels, including Photonic Universe solar panels. This cable is suitable for all weather conditions including cold and hot temperatures.

...Read more View Product

£249.45

Victron Energy AGM Dual Purpose Battery 12V 110Ah – BAT412101084

Victron Energy AGM Dual Purpose Battery 12V 110Ah – BAT412101084 The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches. VRLA AGM: design life 7-10 years Features VRLA technology VRLA stands for Valve Regulated Lead Acid, which means that the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure. VRLA batteries are maintenance free for life. Sealed (VRLA) AGM Batteries AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of high currents than gel batteries. Low Self-Discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C. Victron VRLA batteries can therefore be stored for up to a year without recharging if kept under cool conditions. Exceptional Deep Discharge Recovery Victron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge. Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries, Victron batteries are no exception. Battery Discharging Characteristics The rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C. The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge. The effective capacity decreases with increasing discharge current (see table 1). Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter. Brand Victron Energy Manufacturer Part Number BAT412101084 GTIN 8719076036968 Voltage 12V Battery Capacity (C20) 110Ah Cold Cranking 500CCA Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) L330 x W171 x H220mm Weight 32Kg Warranty 2 Years Country of Manufacture Vietnam Battery Technology AGM Battery Application Dual Purpose

...Read more View Product

£449.99

160W Pro Semi Flexible mono solar panel with self-adhesive backing and 5-Year Warranty

5-Year Warranty - 160W Pro Semi Flexible mono solar panel with self-adhesive backing (Austrian Cells) 1434 x 699 mm This high-efficiency, waterproof 160W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications. The panel is ideal for curved roofs on boats, caravans, motorhomes, RVs etc. because it can easily fit to the shape of the roof when mounted. This panel can be instantly fitted using the peelable adhesive backing attached to the panel, or can also be secured using self-tapping screws, tenax fasteners or even zipping (not supplied). Product features: Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel that can be walked on Incredibly light (only 3.3kg) and very thin (just 2mm) which is great for motorhome and caravan roofs High resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications 100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified. The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter). The fibreglass plastic used in this solar panel is very strong and durable. When the solar panel is mounted on to a rigid surface, it is possible to walk on the solar panel in soft shoes (to prevent accidental scratches), which makes it the perfect choice for mounting on a boat deck. The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 compatible connectors which can be used for easy connectivity to your existing system

...Read more View Product

£359.99

Sterling Power Battery to Battery Charger, Non Waterproof 12/12V 60A – BB1260

Sterling’s range of Battery to Battery Chargers (B2Bs) has grown significantly over the past few years. Offering a product range in this market un surpassed by anyone in both power and flexibility. This is in an effort to supplement the ever growing demand from the commercial vehicle, recreational vehicle and marine industries. The B2Bs have become extremely popular as they fast charge batteries as you cruise along without the need for complex wiring, touching your alternator, voiding the alternator’s warranty and tampering with the electronic control units (ECUs). You can provide the onboard batteries with a fast 4 stage charging profile with a very simple and speedy installation. All of the benefits of advanced charging without any of the draw backs. Simply connect the B2B between the battery being charged and the battery you wish to charge. Features Multiple Activation Modes: Automatic for most non vehicle applications Manual for remote activation. Regenerative braking (requiring ignition feed), Automatic regenerative braking, requiring no ignition feed. Output charging at 12V, 24V, 36V and 48V. Input voltages at 12V and 24V, Up to 800W rating. Much larger model up to 3000W coming soon. Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mde allows you to override this. Safety features 100% fire proof plastic box. No screws to corrode. Thermal power reduction. Multi stage fan cooling Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down. Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages. B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V). Customizable Profile: Choose your own charging profile on the front panel. 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid. 4 stage battery charging: Thge B2B charges batteries between 5-20 times faster than a stand alone alternator. Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking). Remote control optional. DC to DC (Battery to Battery) Wiring Diagram, Information and Help Brand Sterling Power Manufacturer Part Number BB1260 DC V (in) 12 DC V (out) 12 Current (A) 60 Dimensions L190 x W160 x D70mm Weight (kg) 1.4 Warranty 2 Years

...Read more View Product

£222.99

Sterling Power 'Pro Batt Ultra' Battery to Battery Charger, Non Waterproof 12/12V 30A – BB1230

Sterling’s range of Battery to Battery Chargers (B2Bs) has grown significantly over the past few years. Offering a product range in this market un surpassed by anyone in both power and flexibility. This is in an effort to supplement the ever growing demand from the commercial vehicle, recreational vehicle and marine industries. The B2Bs have become extremely popular as they fast charge batteries as you cruise along without the need for complex wiring, touching your alternator, voiding the alternator’s warranty and tampering with the electronic control units (ECUs). You can provide the onboard batteries with a fast 4 stage charging profile with a very simple and speedy installation. All of the benefits of advanced charging without any of the draw backs. Simply connect the B2B between the battery being charged and the battery you wish to charge. Features Multiple Activation Modes: Automatic for most non vehicle applications Manual for remote activation. Regenerative braking (requiring ignition feed), Automatic regenerative braking, requiring no ignition feed. Output charging at 12V, 24V, 36V and 48V. Input voltages at 12V and 24V, Up to 800W rating. Much larger model up to 3000W coming soon. Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mde allows you to override this. Safety features 100% fire proof plastic box. No screws to corrode. Thermal power reduction. Multi stage fan cooling Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down. Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages. B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V). Customizable Profile: Choose your own charging profile on the front panel. 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid. 4 stage battery charging: Thge B2B charges batteries between 5-20 times faster than a stand alone alternator. Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking). Remote control optional. DC to DC (Battery to Battery) Wiring Diagram, Information and Help Brand Sterling Power Manufacturer Part Number BB1230 DC V (in) 12 DC V (out) 12 Current (A) 30 Dimensions L190 x W160 x D50mm Weight (kg) 1.2 Warranty 2 Years

...Read more View Product

£849.00

Victron Energy Phoenix Inverter 12V 3000VA VE.Bus – PIN123020000

Pure sine wave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds. SinusMax – Superior engineeringDeveloped for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem free, to any load. Parallel and 3-phase operation capabilityUp to 6 Phoenix Inverters can operate in parallel to achieve higher power output. Six 24 V 5000 VA units, for example, will provide 24 kW / 30 kVA output power. Operation in 3-phase configuration is also possible. Features SinusMax – Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. Virtually unlimited power thanks to parallel and 3-phase operation capability Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible. To transfer the load to another AC source: the automatic transfer switch If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds). Communications interface These larger Phoenix inverter models come with a VE.Bus port. All you need to connect to your PC is our MK3- USB VE.Bus to USB interface (see under accessories). Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from our website, parameters of the inverters can be customized. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to a GX device (eg Cerbo GX) for monitoring and control. Brand Victron Energy Manufacturer Part Number PIN123020000 GTIN 8719076023579 Voltage 12V Cont. Output Power at 25°C 3000VA Peak Power 6000W Output AC Voltage 230V Protection Category IP21 Efficiency 93% Bluetooth Enabled No Dimensions H362 x W258 x D218mm Weight 18Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£319.99

Victron Energy BlueSolar MPPT 150/70 MC4 – SCC010070300

Victron Energy BlueSolar MPPT 150/70 MC4 – SCC010070300 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98 %. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature (and current, in case of a BMV-712 or a SmartShunt) to one or more BlueSolar Charge Controllers. (VE.Direct Bluetooth Smart dongle needed) Real-time data display options Color Control GX or other GX devices: see the Venus documents on our website. A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC010070300 GTIN 8719076025528 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150 V absolute maximum coldest conditions, 145 V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H215 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£155.35

Victron Energy Blue Smart IP22 Charger 24V 12A 1 Output – BPC241242022

The Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Features Bluetooth Smart The wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. High efficiency With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used. Fully programmable charge algorithm Absorption, Float and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm. Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure. Also charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function. NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50 % of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. Protected against overheating Output current will reduce as temperature increases up to 50 °C, but the Blue Smart Charger will not fail. Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4 V) / HIGH (14,7 V) / RECONDITION / LI-ION. Forty cycle history log The history screen contains historical usage data over the charger’s lifetime and detailed statistics for the last 40 charge cycles. VE.Smart Networking The VE.Smart Network is a wireless device to device (D2D) communication network between Victron products, using Bluetooth Smart. Optional battery voltage and temperature compensation, and current sensing The VE.Smart Network opens the possibility to optimize the charge process: a Smart Battery Sense, Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature to one or more battery chargers. A Smart Battery Monitor or SmartShunt will also communicate battery current. Synchronized parallel charging Synchronize up to ten battery chargers in a VE.Smart network to make them charge a battery as if they were one large charger. The chargers will synchronize the charge algorithm between them. They will simultaneously switch from one charge state to another, for example from bulk to absorption. Synchronized parallel charging has several interesting advantages: – Redundancy: if one charger stops for whatever reason, the other chargers will continue to operate. – Flexibility: simply add a charger to the network if more current is needed. – Cost: several low power chargers will in general cost less than one high power charger. – Installation: several low power chargers may be easier to fit in a confined space Brand Victron Energy Manufacturer Part Number BPC241242002 GTIN 8719076037682 Voltage 24V Charge Current 12A Input Voltage 230V Number of Outputs 1 Can Be Used As Power Supply Yes Protection Category IP22 Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H235 x W108 x D65mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£419.00

TN Power Lithium 12V 84Ah Leisure Battery LiFePO4

84Ah Lithium Leisure Battery A huge advantage to lithium technology is the life cycle rating which far surpasses alternative technologies. This specific item has 7000 charge and discharge cycles at a depth of 50% Features Using the technology of lithium iron phosphate cell, superior safety, thousands of cycles, 100%DOD, under normal conditions Built-in automatic protection for over-charge, over discharge, over current and over temperature Free of maintenance Internal cell balancing Lighter weight: About 40% -50% of the weight of a comparable lead acid battery Can be charged using most standard lead-acid charges (set) Wider temperature range:-20°C-60°C Support for Series application expansion (up to 51.2V) and two in parallel Applications UPS Solar &Wind Power System Golf Cart Electric Vehicle , E-bike, E-rickshaw etc. Lighting Motorhomes Caravans Campervans Brand TN Power Manufacturer Part Number TN84 Voltage 12V Capacity (C20) 84Ah Terminal Type M8 Terminal Layout LH+ Dimensions (Including Terminals) L260 x W169 x H218mm Weight 10.2Kg Warranty 4 Years Battery Technology Lithium Battery Application Deep Cycle Country of Manufacture China

...Read more View Product

£79.95

Victron Smart Batteryprotect 100A 12V/24V Battery Over Discharge Protector Sbp-100 (Bluetooth Inbuilt)

This Victron 100A 12/24V automatic smart battery protector offers protection for the discharging of your battery system, preserving your battery health and protecting appliances. Features: Low voltage disconnect: when battery charge is low, the Smart BatteryProtect disconnects the battery from nonessential loads to avoid deep discharge and preserve battery health. Programmable low-voltage threshold: easily customise the disconnect threshold based on discharging needs. Overvoltage disconnect: when battery voltage gets too high, the Smart Battery Protect disconnects the loads to protect them from damage. Bluetooth connectivity: connect your smartphone for easy programming of the voltage settings. Automatic system recognition: the Smart BatteryProtect detects the system voltage (12V or 24V) on start-up, allowing easy installation and setup. Ultra-low current consumption: avoid further drain on the battery to preserve battery level, especially after low voltage disconnect. Remote switch and alarm connections: connect input and output relays to control the Smart BatteryProtect remotely, manually turn loads on and off, and use custom alarm systems. Compatible with Lithium batteries: specialised modes for use with Ve.Bus Lithium battery management systems, and as a charge interrupter for Lithium charging. System Specifications: Nominal battery voltage: 12V / 24V Operating voltage range: 6 - 35V Maximum continuous current: 100A Peak current (30 seconds): 600A Current draw: <1.5mA active, <0.6mA during disconnect Alarm Relay: 50mA Operating temperature range: -40°C to +40°C (up to 60% capacity at 50°C) Dimensions: Dimensions: 59 x 42 x 115 mm Weight: 500g M8 terminals Battery Protect Advantages Automatic smart battery protectors offer protection for the discharging of your battery system, preserving your battery health and protecting appliances. Victron Energy offers a range of discharge protectors which are designed to protect a battery bank from over-discharge and extend its lifespan. The discharge protectors offer several advantages and functionality including: -Protecting the battery bank: The discharge protectors protect the battery bank from over-discharge by disconnecting the load when the battery's state of charge (SOC) reaches a certain level. This helps to extend the lifespan of the battery bank by preventing deep discharge cycles. Customizable settings : The discharge protectors have customizable settings, this allows you to set the SOC level at which the load will be disconnected, and also set the reconnection level, depending on your needs and the type of battery you are using. -Advanced monitoring and control: The discharge protectors can be connected to a network for remote monitoring and control, this allows you to monitor the status of the battery bank and adjust settings as needed. -Compatible with other victron energy product: The discharge protectors can work seamlessly with other Victron Energy products such as the Multiplus inverter/charger, and GX devices for advanced monitoring and control. -Easy installation : The discharge protectors are easy to install and they are compatible with different types of battery, you can use them with lead-acid, lithium-ion, and other types of battery. -Reliability: The discharge protectors are built with high-quality and durable components, which ensures reliable and long-lasting performance. Overall, Victron Energy discharge protectors are a useful addition to a battery bank and can help to extend its lifespan by preventing over-discharge. They are easy to install and customizable settings, compatible with different types of batteries, and allow advanced monitoring and control, which makes them suitable for a wide range of applications.

...Read more View Product

£25.00

EcoFlow MC4 Solar Parallel Connection Cable

The EcoFlow MC4 solar parallel cable connects solar panels in parallel to an EcoFlow power station (Delta / River Series).

...Read more View Product

£198.99

100W 12V/24V Waterproof Portable Folding Solar Panel Without Solar Charge Controller

100w Portable Solar Panel This high quality, portable, waterproof 100W folding solar panel is designed to provide free power for charging 12V/24V batteries, for example in vehicles and boats (motorhome, caravan, camper, narrow boat, yacht etc) or any other system with a 12V/24V battery or battery bank. This is the ideal solution for experiencing the benefits of solar without the permanency of a mounted solar panel, as this panel can be folded and stored away when not in use.This high efficiency 100W (50W + 50W) 12V/24V folding monocrystalline solar panel comes with:Adjustable aluminium stand, handle and latches5m solar cableStorage / protective case The portable folding solar panel has several important features which make it a truly unique, premium quality product:The portable solar panel is completely waterproof, so the unit can be used in all weather conditionsThe high efficiency (50W + 50W) monocrystalline solar panels are made of high quality German solar cellsThe storage bag is not just a dust cover – it includes a layer of foam for added protection We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This folding solar panel is supplied without a solar charge controller, to offer the flexibility to choose the controller best suited to your application. You can use your existing solar charge controller with this panel or it can be paired with any of our solar charge controllers. We offer a wide range of controllers; with features including LCD displays, MPPT/ Dual Battery/ Buck-Boost capability, mobile app connectivity and more - providing you with increased control over your system. This folding panel also allows you to remotely mount a solar charge controller in a convenient location for easy monitoring and quick access. This folding panel can be easily connected to one or more similar folding panels if necessary. The entire system can then be connected through a larger solar charge controller to increase the energy yield. Please note this panel comes pre-wired for a 12V battery connection and will require re-wiring for 24V. Alternatively a buck boost solar charge controller can be used.The folding solar panel comes with 5m (bare ended) solar cable to connect the panel to your choice of solar charge controller. The design incorporates a stand which is easy to set up and adjust, while the handle and latches ensure ease of storage and portability. The storage case included with the panel is made with a layer of foam which provides protection for the glass and the frame, and prevents any accidental damage. In addition to this, the solar panels’ corners are protected by plastic shields, which reduce the risk of damage.Solar panel specifications:Peak power: 100WMaximum power voltage: 17.5VMaximum power current: 5.70A (2 x 2.85A)Open circuit voltage: 21.6VShort circuit current: 6.2A (2 x 3.1A)Power allowance: +/- 3%Cable: 5m 4.0mm2 single core solar cableDimensions: 51 x 69 x 6cm (folded)Weight: 12kg Advantages of Portable Solar Portable solar panels have quickly become a popular option for those looking to harness the power of the sun while on the go. These panels offer a number of advantages over traditional, fixed solar panels, making them a great choice for a wide range of applications. First and foremost, the most obvious advantage of portable solar panels is their portability. They can easily be transported and set up wherever you need them, which makes them ideal for camping, RVing, boating, and other outdoor activities. This portability allows you to harness the power of the sun no matter where you are, providing you with reliable and sustainable power sources. Another major advantage of portable solar panels is that they are easy to install. Unlike traditional, fixed solar panels, which often require professional installation, portable solar panels can be set up by just about anyone. This makes them a great option for people who are on a tight budget, or who want to avoid the hassle of professional installation. In addition to being portable and easy to install, portable solar panels are also highly efficient. They use advanced technology to track the sun and optimize power output, which helps to ensure that they are producing as much power as possible. This efficiency means that even small portable solar panels can produce enough power to meet the needs of most portable devices, making them a great choice for powering laptops, tablets, and other electronic devices. Lastly, portable solar panels are also very cost-effective. They are often less expensive than traditional, fixed solar panels, which can make them an attractive option for people who are on a tight budget. Overall, portable solar panels are an excellent choice for anyone looking to harness the power of the sun while on the go. They are portable, easy to install, highly efficient, and cost-effective, making them a great choice for a wide range of applications. Whether you're camping in the wilderness, boating on the open water, or just looking for an alternative power source, portable solar panels are a great option to consider.

...Read more View Product

£88.99

High Efficiency 20A Mppt Solar Charge Controller For Solar Panels Up To 260W (12V) / 520W (24V) Up To 100V

MPPT Technology:This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined input solar power allowed for this controller is 260W for a 12V battery system or 520W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full system protection:This charge controller features a comprehensive set of electronic protection functions to ensure the maximum possible efficiency of your solar system. These include: reverse current prevention at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, solar panel over voltage, over load, short circuit and reverse polarity protection. The controller also has self-diagnostic capability and highlights any system errors using advanced fault-targeting technology. Lithium Battery charging:This solar charge controller is compatible with lithium batteries when a lithium battery charging program is selected using PC software (see below for more details).Advanced system monitoring:The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel)Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energyEasy to use buttons allow the user to manually select the battery type (sealed, flooded or gel) and program load settings (e.g. set timers for lighting, fans, pumps etc).Current limiting function (20A) allows the possibility of adding more solar panels to your solar system in the future Multiple connectivity optionsThis model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only). If using the RJ45 to USB cable, the user also has the option to create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and can also set the charging parameters for lithium batteries.Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. (Inbuilt temperature sensor is not enabled for lithium batteries). Controller specifications: The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system Fully automated operation and auto 12/24V selection 3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 260W (12V) / 520W (24V) Temperature sensor for automatic compensation (-3mV/°C/2V) Comprehensive electronic protection features Communication port: RS485/RJ45 interface Grounding: negative common ground Current limiting function (20A) Self-consumption: <12mA Working temperature: -25°C to +50°C Size: 22 x 15.4 x 5.2 cm Mounting dimension: 17 x 14.5 cm Weight: 0.94kg Multiple mounting holes (5mm diameter) for ease of installation

...Read more View Product

£214.99

80W 12V Lightweight Portable Waterproof Folding Solar Charging Kit With Mppt Controller

80w Portable Solar Panel We always ensure that our products are of the highest quality. That's why we have developed this lightweight portable 80W folding solar charging kit - comprised of 2 x highly durable solar panels made from German monocrystalline solar cells and reinforced with anodised aluminium and a strong ETFE surface, along with a high efficiency 10A MPPT solar charge controller fitted on the back of the kit to protect your batteries and extract the maximum available power from the solar panels. This lightweight portable solar kit is designed to provide free power for charging 12V batteries, for example in vehicles and boats (motorhome, caravan, camper, narrow boat, yacht etc) or any other systems with a 12V battery or battery bank. It comes with everything required for battery charging and can be used immediately - simply connect it to your battery and find a well-lit area for the folding solar panels.This folding portable solar charging kit includes:Lightweight 40W + 40W aluminium-reinforced solar panels with a durable ETFE coatingHigh-efficiency waterproof 10A MPPT solar charge controllerAdjustable aluminium folding stand5m battery cable with crocodile clips for ease of connectionProtective storage caseInstallation manual Key features:Incredibly lightweight (only 4.5 kg) and easily transportable using the inbuilt handles and protective case.Suitable for all weather conditions - the kit is 100% waterproof, even including the solar charge controller fitted on the back.High efficiency 40W + 40W folding solar panels are made of high quality German 5-busbar monocrystalline solar cells.Advanced 10A MPPT solar charge controller extracts the maximum power from the solar panels whilst providing complete safety protection.Adjustable aluminium folding stand for positioning the solar panels towards direct sunlight to maximise their output.Sturdy storage case made with a layer of protective foam to prevent accidental damage to the solar kit. Dimensions: 56.5 x 51 x 5 cm (folded) Lightweight aluminium-reinforced solar panelsThe high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.These reinforced solar panels feature an embedded sheet of anodised aluminium fully encapsulated within the solar panels for added strength and resilience. In addition, the surface of solar panels is made of strong ETFE material which has a longer service life compared to standard lightweight solar panels. As a result, these particular solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency.High-efficiency MPPT solar charge controllerThe waterproof, high-efficiency 10A MPPT solar charge controller mounted on the back of the solar kit constantly measures the battery's state of charge to select the most appropriate charging parameters. The Maximum Power Point Tracking (MPPT) functionality offers increased efficiency compared to standard PWM charge controllers, and ensures that the solar kit provides as much power as possible . The controller also provides important safety protection for the battery against overcharging, reverse current / polarity, overheating and overload. Advantages of Portable Solar Portable solar panels have quickly become a popular option for those looking to harness the power of the sun while on the go. These panels offer a number of advantages over traditional, fixed solar panels, making them a great choice for a wide range of applications. First and foremost, the most obvious advantage of portable solar panels is their portability. They can easily be transported and set up wherever you need them, which makes them ideal for camping, RVing, boating, and other outdoor activities. This portability allows you to harness the power of the sun no matter where you are, providing you with reliable and sustainable power sources. Another major advantage of portable solar panels is that they are easy to install. Unlike traditional, fixed solar panels, which often require professional installation, portable solar panels can be set up by just about anyone. This makes them a great option for people who are on a tight budget, or who want to avoid the hassle of professional installation. In addition to being portable and easy to install, portable solar panels are also highly efficient. They use advanced technology to track the sun and optimize power output, which helps to ensure that they are producing as much power as possible. This efficiency means that even small portable solar panels can produce enough power to meet the needs of most portable devices, making them a great choice for powering laptops, tablets, and other electronic devices. Lastly, portable solar panels are also very cost-effective. They are often less expensive than traditional, fixed solar panels, which can make them an attractive option for people who are on a tight budget. Overall, portable solar panels are an excellent choice for anyone looking to harness the power of the sun while on the go. They are portable, easy to install, highly efficient, and cost-effective, making them a great choice for a wide range of applications. Whether you're camping in the wilderness, boating on the open water, or just looking for an alternative power source, portable solar panels are a great option to consider.

...Read more View Product

£194.99

80W 12V Waterproof Portable Folding Solar Charging Kit For Motorhome, Caravan, Boat

80w Portable Solar Panel This complete 80W 12V portable folding solar charging kit includes:High efficiency 40W + 40W folding monocrystalline solar panelsAdvanced fully automated 10A solar charge controller with enhanced protection functionsAdjustable aluminium stand, handle and latches5m cable with a battery plug and a fuseBattery crocodile clips for ease of connectionStorage / protective caseInstallation manual This portable solar kit has several important features which make it a truly unique, premium quality product:It is completely waterproof, including the solar charge controller fitted on the back (genuine IP67-waterproof solar controller), which means it is suitable for all weather conditionsThe high efficiency 40W + 40W folding monocrystalline solar panels are made of high quality German solar cellsThe protective bag is not just a dust cover - it's a sturdy protective case made with a layer of foam which prevents accidental damage to the frame and glassThe advanced fully automated 10A solar charge controller provides complete overcharge protection and supports several battery types with different charging parameters for maximum efficiency (sealed, gel, flooded batteries) We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This high quality, waterproof 80W portable folding solar kit is designed to provide free power for charging 12V batteries, for example in vehicles and boats (motorhome, caravan, camper, narrow boat, yacht etc) or any other systems with a 12V battery or battery bank. It comes with everything required for battery charging: an advanced 10A 12V solar charge controller, and 5m cable with a battery plug, fuse and crocodile clips. You can start using the kit immediately - simply connect it to your battery and find a well-lit area for the folding solar panels.The kit comes with a stand which is very easy to set up and adjust. A handle and latches ensure ease of storage and portability. The storage case included with the kit is made with a layer of foam, which will completely protect the glass and the frame and prevent any accidental damages. In addition, the corners of solar panels are protected by plastic which reduces the risk of damage and adds to the aesthetically pleasing design.The 10A waterproof solar charge controller included with the kit will protect your battery from over-charging (it controls the state of charge of your battery every second). The controller has many other protection functions, such as stopping reverse current at night (from the battery back to the solar panel), incorrect polarity and short circuit protection. Controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. PWM technology can also recover some lost battery capacity.In addition, the solar charge controller has a very high degree of water protection - IP67 (which means it's completely sealed), so it is absolutely safe to use this solar kit in all weather conditions.This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings. Requires a RS485 to RJ45 cable to extend from controller to the remote meter.2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users). Requires an RS485 to RJ45 cable to extend from controller to the Wi-Fi module.3) An RS485 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.The kit is suitable for sealed, gel and flooded 12V batteries: the solar charge controller allows battery type selection for maximum efficiency of charging.Solar panel specifications:Peak power: 80WMaximum power voltage: 17.5VMaximum power current: 4.44A (2 x 2.22A)Open circuit voltage: 21.6VShort circuit current: 4.8A (2 x 2.4A)Power allowance: +/- 3%Dimensions: 51 x 55 x 6 cm (folded)Weight: 10.5kg Advantages of Portable Solar Portable solar panels have quickly become a popular option for those looking to harness the power of the sun while on the go. These panels offer a number of advantages over traditional, fixed solar panels, making them a great choice for a wide range of applications. First and foremost, the most obvious advantage of portable solar panels is their portability. They can easily be transported and set up wherever you need them, which makes them ideal for camping, RVing, boating, and other outdoor activities. This portability allows you to harness the power of the sun no matter where you are, providing you with reliable and sustainable power sources. Another major advantage of portable solar panels is that they are easy to install. Unlike traditional, fixed solar panels, which often require professional installation, portable solar panels can be set up by just about anyone. This makes them a great option for people who are on a tight budget, or who want to avoid the hassle of professional installation. In addition to being portable and easy to install, portable solar panels are also highly efficient. They use advanced technology to track the sun and optimize power output, which helps to ensure that they are producing as much power as possible. This efficiency means that even small portable solar panels can produce enough power to meet the needs of most portable devices, making them a great choice for powering laptops, tablets, and other electronic devices. Lastly, portable solar panels are also very cost-effective. They are often less expensive than traditional, fixed solar panels, which can make them an attractive option for people who are on a tight budget. Overall, portable solar panels are an excellent choice for anyone looking to harness the power of the sun while on the go. They are portable, easy to install, highly efficient, and cost-effective, making them a great choice for a wide range of applications. Whether you're camping in the wilderness, boating on the open water, or just looking for an alternative power source, portable solar panels are a great option to consider.

...Read more View Product

£319.99

Victron Energy BlueSolar MPPT 150/70-Tr – SCC010070200

Victron Energy BlueSolar MPPT 150/70-Tr – SCC010070200 This Victron 150V 70A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 70A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 150-70 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Brand Victron Energy Manufacturer Part Number SCC010070200 GTIN 8719076025511 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150 V absolute maximum coldest conditions, 145 V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£749.99

Drift PRO 12V 300Ah LiFePO4 Leisure Battery (Gen2)

With a massive 3,840Wh of usable energy, the Drift PRO 12V 300Ah Gen2 is built to power serious off-grid setups – from expedition-ready campervans and motorhomes to boats and static solar installations. Built for serious off-grid setups, the Drift PRO 300Ah Gen2 delivers rock-solid reliability and smart integration in a tough, repairable metal shell – complete with real-time app monitoring and full Victron Cerbo GX support. At its core are trusted Grade A EVE prismatic cells, a 300A Smart BMS, and a built-in heating system – delivering dependable performance year-round, whatever the weather. What’s New in the Gen2? ✅ Integrated Active Balancing: Now built-in – no external balancer required. ✅ Battery-Linking via RJ45: Dedicated Battery-Link ports allow multiple Drift PRO units to communicate over CANbus with a single Victron Cerbo GX (or GX-enabled inverter). ✅ Improved Internal Layout: Optimised for thermal management, cable routing, and long-term serviceability. Key Features: ✅ 3,840Wh Capacity: Extended runtime for demanding off-grid applications – perfect for high-draw systems and longer stays off-grid. ✅ Grade A Cells: Built with trusted EVE LiFePO4 cells for long cycle life and consistent performance. ✅ 300A Smart BMS: Advanced protection against over-voltage, under-voltage, over-current, short circuit, and low-temperature charging. ✅ Victron Plug-and-Play Integration: Connect the CAN port on the master battery to the BMS-CAN port on your Victron Cerbo GX (or GX-enabled inverter) using the supplied cable. ✅ Multi-Battery Support: Additional Drift PRO batteries connect via the Battery-Link port, enabling full multi-battery CAN communication with Victron. ✅ 10-Year Warranty & UK Support: Long-term peace of mind with responsive, in-house customer service you can actually talk to. ✅ Fogstar App Monitoring: Real-time Bluetooth monitoring of SOC, cell voltages, temperatures, and cycle data. ✅ Low Temperature Charging Protection: Automatic internal heating system enables safe charging below 0°C. ✅ On/Off Switch: Enables hibernation mode for storage and transport. ✅ Serviceable Metal Case: Durable, serviceable design with M10 terminals. ✅ Lightweight: Just 33.5kg with built-in handles for easier transport and installation. ✅ UK Engineered: Designed and developed by Fogstar’s in-house team for real-world off-grid conditions. Quick Specifications: Nominal Capacity: 300AhNominal Voltage: 12VRecommended Charge Voltage: 14.4VMax Continuous Discharge: 300ACycle Life: 4,500 cycles at 80% depth of discharge (DOD)Charging Efficiency: Up to 98%Dimensions: 280 x 390 x 205 mmWeight: 33.5kgTerminals: M10Operating Temp: -20°C - 55°C

...Read more View Product

£37.58

Blue Sea 5114 Fuse A3T/Class T 150A

Extremely fast short-circuit response. 20,000 Ampere Interrupt Capacity (AIC)

...Read more View Product

£225.00

BASE100 - 12.8V LiFePO4 100Ah - Budget Friendly Lithium Iron Phosphate Battery

BASE100 - 12.8V LiFePO4 100Ah - Budget Friendly Lithium Iron Phosphate Battery BASE100 - A cost-effective, reliable power solution for high-use applications, where compromise is not an option. Built for durability and performance on a budget, our BASE lithium ensures uninterrupted power, keeping essential equipment running when it matters most. High Capacity - BASE100 Offers 1280Wh of high-capacity power, ideal for demanding applications and long use. Size & Weight - Weighing just 9.9g, BASE100 is lighter and more compact than similar-powered AGM batteries. Safety First - LiFePO4 - The proven, safe lithium option. Protected by an advanced BMS for safety & maximum longevity. Fast Charge & Discharge - 2-hour fast charge, 100A continuous output, and 200A peak for high-use power start-ups. Long Cycle Life - Provides 6000 cycles at 80% depth of discharge. 3500 cycles at 100%. Base 100 Instruction Booklet Base 100 Fact Sheet

...Read more View Product

£484.99

EXIDE DUAL AGM - Superior Battery - EP2100 240AH

Exide EP2100 Dual AGM Battery (625) 240Ah 1200cca Exide DUAL AGM battery range is designed for boats and caravans with one battery bank for all consumers. It is also suitable for additional batteries applied directly to electrical winches, thrusters and trolling motors. The batteries are partially discharged during use. DUAL AGM’s reinforced design, combined with a good recharging procedure, is key to providing the best result and service life. The DUAL AGM battery range, with Wh* performance from 450-2100 Wh, is the ideal choice to cover all dual-supply needs for the most popular recreational boats. BENEFITS Ideal for most popular range of motorhomes & caravans High mounting flexibility Maintenance free High vibration & tilt resistant, spill-proof, leak-proof With AGM technology (absorbed glass mat flat plate or orbital) with VRLA venting (valve regulated) , Wh* performance range coverage goes from 450Wh to 2100Wh Weight 72 kg Dimensions 518 × 279 × 240 mm Brand Exide Battery Type AGM/EFB Battery by Application All Batteries, Leisure, Marine Battery Voltage (V) 12V Battery Warranty 2 Years

...Read more View Product

£145.99

MPK VisionStar M Pro Non-Vented Rooflight 400 x 400mm Signal White

The VisonStar roof lights are flat in design, easy to operate, infinitely adjustable, particularly noise-reducing and ultra-robust. The VisionStar M Rooflight for the cut-out size 400 x 400 mm has an attractive interior frame with double-pleated blinds. Smoked polycarbonate rooflight with double glazing which makes the dome robust and impact resistant. Key Features Optionally with and without continuous ventilation Attractive interior frame with double pleated blinds Steplessly adjustable up to 50° Very flat rooflight (only 80 mm above roof) Greatly reduced driving noise and draught Double-walled frame for better insulation Continuous ventilation even with pleated blinds closed High UV protection due to tinted dome material Bending Radius Corner: 28 mm Light Colour Signal White Brand MPK Type Roof Vent Height Description Above roof: 80mm Width Frame: 530mm, Dome: 470mm Depth Frame: 565mm, Dome: 490mm Thickness Roof: 25 mm – 60 mm Cut Out 400 x 400mm

...Read more View Product

£149.99

Victron Energy Orion-Tr Smart 24/12V 20A (240W) Isolated DC-DC Charger – ORI241224120

Victron Energy Orion-Tr Smart 24/12V 20A (240W) Isolated DC-DC Charger – ORI241224120 The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism. The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C. Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism. Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen. Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example). All models are short circuit proof and can be paralleled to increase output current An unlimited number of units can be connected in parallel. High temperature protected The output current will reduce at high ambient temperature. IP43 protection When installed with the screw terminals oriented downwards. Screw terminals No special tools needed for installation. Brand Victron Energy Manufacturer Part Number ORI241224120 gtin 8719076046080 Voltage 24/12V Cont. Output Current 20A Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 88% Bluetooth Enabled Yes Dimensions H130 x W186 x D70mm Weight 1.3Kg Warranty 5 Years

...Read more View Product

£1,239.99

820w Off-grid Solar Kit with Sharp Panel & Victron MPPT

Elevate Your Off-Grid Experience with the 820W Off-Grid Solar Kit by Van Junkies For those looking to power up off-grid spaces like narrowboats, shepherd huts, garages, or summer houses, Van Junkies’ 820W Off-Grid Solar Kit featuring a Sharp Solar Panel and Victron MPPT Charge Controller is the ultimate solution. Designed to harness clean, renewable energy, this kit provides an efficient and reliable power source, perfect for any off-grid setup. What’s Included in the 820W Off-Grid Solar Kit? Sharp 820W Solar Panel - Known for durability and efficiency, Sharp’s monocrystalline solar panel ensures maximum energy production even on cloudy days. Victron MPPT Charge Controller - A top-tier MPPT (Maximum Power Point Tracking) controller by Victron, it optimizes energy harvest, improves battery lifespan, and seamlessly integrates with other power components. Essential Wiring and Accessories - Installation is simplified with included high-quality cabling and fusing, allowing easy setup. Why Choose This Kit? High Efficiency - With a 820W solar panel, this kit generates ample power to run essential devices, lighting, and small appliances. Reliability and Safety - The Victron MPPT controller prevents overcharging, ensuring safe and efficient power flow to your batteries. Versatile Applications - Perfect for off-grid installations in remote settings, this kit empowers you to stay connected and powered up, no matter where your adventures or needs take you. The Van Junkies Advantage Van Junkies is committed to high-quality, robust, and dependable off-grid solar solutions. With expertise in renewable energy and a dedication to empowering off-grid living, our team offers technical support to guide you through installation and usage. Upgrade your off-grid lifestyle with Van Junkies’ 820W Solar Kit—wherever your off-grid dreams lead, this kit is your companion for sustainable, reliable energy. Kit Includes: 2 x Sharp NU-JC410B Black Frame Monocrystalline Solar Panel With High-Efficiency PERC Cells Victron Smartsolar MPPT Solar Charge Controller 150/60 SCC115060211 10mm (2m) fused battery leads 6mm (20m) PV Extension Cables Double Pole Breaker Specifications (per panel) Peak power: 410W Maximum power voltage: 31.3V Maximum power current: 13.1A Open circuit voltage: 37.79V Short circuit current: 13.81A Power tolerance: 0/+5% Dimensions: 1722 x 1134 x 30 mm Weight: 21.8 kg Mounting holes for ease of installation 2 x 1.25m of high-quality single core solar cable Male and female MC4 waterproof connectors UK mainland deliveries only. For non-mainland addresses (including the Scottish Highlands) please contact us for a delivery quote. Not quite what you are looking for or need batteries to match? We can put together any combination of panels, controllers & batteries, give us a call.

...Read more View Product

£299.99

Victron Energy Centaur Charger 12V 20A 3 Outputs - CCH012020000

The Centaur range of battery chargers features auto-ranging input covering 90-265VAC 50/60Hz input meaning they can be used anywhere in the world.Crucially, and unlike many other products that state universal input, the Centaur range will maintain full output power within the entire specified range. Other features include fully automatic three stage charge characteristic that ensures batteries are fully charged every time and three isolated charge outputs for multi battery configurations to suit the majority of typical installations.FeaturesQuality without compromiseAluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions.Universal 90-265V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation)All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz.The chargers also accept a 90-400 V DC supply.Three outputs that each can supply the full output currentThree isolated outputs to simultaneously charge 3 battery banks Each output is capable to supply the full rated current.Three-stage charging, with temperature compensationThe Centaur charges at bulk rate until the output has reduced to 70% of the rated Amps, at which a 4 hour timer begins. After the timed period the charger switches to float rate. An internal temperature sensor is used to compensate the charge voltage with – 2 mV/ºC (– 1 mV/ºF) per cell. A DIP switch is available to select the optimum charge/float voltages for Flooded Lead-acid, Gel or AGM batteries. GTIN 8719076021476 Voltage 12V Charge Current 20A Input Voltage 90-265V Number of Outputs 3 Bluetooth Enabled No Protection Category IP20 Dimensions H355 x W215 x D110mm Weight 3.8Kg Warranty 5 Years Country of Manufacture Malaysia

...Read more View Product

£3,050.80

Clayton Power – LPS II 2500 – 1 kWh

Clayton Power LPS II 2500 – 1 kWh: Compact Powerhouse for Your Energy Needs In today's fast-paced and energy-demanding world, the need for reliable, efficient, and portable power solutions has never been more critical. Enter the Clayton Power LPS II 2500 – 1 kWh, a compact, high-performance energy storage system designed to meet the diverse needs of modern businesses and adventurous individuals alike. Unparalleled Efficiency in a Compact Size The Clayton Power LPS II 2500 – 1 kWh breaks new ground in the realm of energy storage, offering unmatched efficiency in a remarkably compact package. This system is engineered to provide a high-density energy solution, making it perfect for applications where space is at a premium but power cannot be compromised. Whether you're powering critical equipment on a remote job site or ensuring that your recreational vehicle stays lit and lively, the LPS II 2500 – 1 kWh delivers. Reliable Power Wherever You Go Reliability is the cornerstone of the Clayton Power LPS II 2500 – 1 kWh. Designed to withstand the rigors of both indoor and outdoor use, this system guarantees a steady and dependable source of power under various conditions. Its advanced battery management system ensures optimal performance and longevity, giving you peace of mind whether you're facing critical operations or exploring off the grid. Plug-and-Play Convenience The LPS II 2500 – 1 kWh is the epitome of convenience. With its plug-and-play design, this system can be quickly and easily integrated into any setup without the need for complex installations or technical expertise. This feature, combined with its portability, makes it an ideal choice for mobile businesses, emergency services, and outdoor enthusiasts seeking reliable power on the move. Eco-Friendly Power Solution In an era where sustainability is increasingly important, the Clayton Power LPS II 2500 – 1 kWh stands out as an eco-friendly power solution. By harnessing the latest in lithium battery technology, it not only offers superior performance but also operates with a minimal environmental footprint. This system is a testament to how green technology can go hand-in-hand with high efficiency and reliability. A Smart Investment for a Wide Range of Applications The Clayton Power LPS II 2500 – 1 kWh is not just a product; it's an investment in efficiency, reliability, and sustainability. Its versatility makes it suitable for a wide range of applications, from supporting critical medical devices and construction tools to enhancing the comfort of your recreational vehicle. With its compact size, ease of use, and eco-friendly design, the LPS II 2500 – 1 kWh is poised to meet the energy demands of today and tomorrow. In Conclusion The Clayton Power LPS II 2500 – 1 kWh represents a leap forward in portable energy solutions, offering an unmatched combination of efficiency, reliability, and convenience. Whether you're a professional requiring robust power for your equipment or an adventurer seeking a reliable energy source in the great outdoors, this system is designed to support your endeavors without compromise. Embrace the future of energy with the Clayton Power LPS II 2500 – 1 kWh and power your world with confidence.

...Read more View Product

£999.99

500W flexible CIGS solar panel with self-adhesive backing (Made in Sweden)

Introducing our fully flexible SELM (CIGS) solar panels that are TUV-certified and manufactured in Sweden to the highest European quality standards. They are constructed using CIGS (Copper Indium Gallium Selenide) thin-film technology for maximum flexibility and performance under mechanical stresses. SELM panels are built for durability and efficiency, they offer unmatched performance, even in shaded conditions, and are one of the most eco-friendly options on the market. These products are lightweight and ideal for applications requiring flexibility and adaptability, such as curved surfaces and modern architectural projects, industrial projects, residential rooftops, and mobile setups. Robust and Long-Lasting Technology: This panel comes with an impressive 10-year product warranty and a 25-year performance warranty, ensuring long-term reliability and peace of mind. It is designed to withstand the toughest conditions while delivering consistent energy output over time. Shatterproof and Crackproof Construction: Unlike the more common crystalline solar panels, a CIGS panel is fully flexible and walkable, meaning it can endure mechanical impacts and the expansion and contraction of roof materials without suffering from microcracks. It is built to last, even under the most extreme conditions. Superior Shading Performance: This SELM panel boasts an exceptional ability to handle shading. With bypass diodes between every cell, it outperforms conventional solar panels (which typically have only one diode per 30-50% of the area) in partially shaded conditions, delivering 10-20% higher annual energy yield. Industry-Leading Sustainability: These solar panels have one of the lowest carbon footprints in the industry, producing only 4-6 g/kWh of CO2 emissions during their lifecycle—90% less than standard crystalline solar panels, which emit 40-60 g/kWh. Streamlined Installation: Installation is easy with the strong self-adhesive backing that allows for quick and easy setup on a wide range of surfaces, including bitumen roofs and roofing felts. There is no need for complex mounting hardware—just peel and stick. Sleek Aesthetic Design: The full-black construction gives the SELM panel a modern, elegant look, making it ideal for rooftops where aesthetics matter. Its sleek design ensures it blends seamlessly with your roof for a discreet and attractive installation. Solar panel specifications: Peak power: 500W Maximum power voltage: 60.2V Maximum power current: 8.3A Open circuit voltage: 75.1V Short circuit current: 9.3A Dimensions: 2583 x 1292 x 2.5mm Weight: 6.6kg This product comes with a 10 year product warranty which covers material and production defects and a 25-year performance warranty.

...Read more View Product

£849.99

320W flexible CIGS solar panel with self-adhesive backing (Made in Sweden)

Introducing our fully flexible SELM (CIGS) solar panels that are TUV-certified and manufactured in Sweden to the highest European quality standards. They are constructed using CIGS (Copper Indium Gallium Selenide) thin-film technology for maximum flexibility and performance under mechanical stresses. SELM panels are built for durability and efficiency, they offer unmatched performance, even in shaded conditions, and are one of the most eco-friendly options on the market. These products are lightweight and ideal for applications requiring flexibility and adaptability, such as curved surfaces and modern architectural projects, industrial projects, residential rooftops, and mobile setups. Robust and Long-Lasting Technology: This panel comes with an impressive 10-year product warranty and a 25-year performance warranty, ensuring long-term reliability and peace of mind. It is designed to withstand the toughest conditions while delivering consistent energy output over time. Shatterproof and Crackproof Construction: Unlike the more common crystalline solar panels, a CIGS panel is fully flexible and walkable, meaning it can endure mechanical impacts and the expansion and contraction of roof materials without suffering from microcracks. It is built to last, even under the most extreme conditions. Superior Shading Performance: This SELM panel boasts an exceptional ability to handle shading. With bypass diodes between every cell, it outperforms conventional solar panels (which typically have only one diode per 30-50% of the area) in partially shaded conditions, delivering 10-20% higher annual energy yield. Industry-Leading Sustainability: These solar panels have one of the lowest carbon footprints in the industry, producing only 4-6 g/kWh of CO2 emissions during their lifecycle—90% less than standard crystalline solar panels, which emit 40-60 g/kWh. Streamlined Installation: Installation is easy with the strong self-adhesive backing that allows for quick and easy setup on a wide range of surfaces, including bitumen roofs and roofing felts. There is no need for complex mounting hardware—just peel and stick. Sleek Aesthetic Design: The full-black construction gives the SELM panel a modern, elegant look, making it ideal for rooftops where aesthetics matter. Its sleek design ensures it blends seamlessly with your roof for a discreet and attractive installation. Solar panel specifications: Peak power: 320W Maximum power voltage: 49.9V Maximum power current: 6.6A Open circuit voltage: 60.9V Short circuit current: 7.6A Dimensions: 2001 x 1298 x 2mm Weight: 7.5kg This product comes with a 10 year product warranty which covers material and production defects and a 25-year performance warranty.

...Read more View Product

£1,199.00

LithiumPro SMARTCOMM 12v 280ah Seatbase lithium battery

12v 280ah Seatbase lithium battery Introducing the ALL NEW 12V 280Ah Seatbase Lithium Battery, the UK’S most powerful seat base battery. This advanced 280ah seat base battery is packed with industry-leading technology and is specifically designed to fit under the swivel seat of your leisure vehicle. It is compatible with the VW T6.1, New Ford Custom, Sprinter, MAN, Renault, and all Fiat Ducato motorhome derivatives. Handles located on the side enable quick and easy installation it also comes with optional brackets for securing to the seatbase frame. This state-of-the-art lithium battery is part of a new range developed by Lithium Pro Energy called SMARTCOMM SERIES offering advanced market-leading safety features embedded within the battery as standard. EVE Grade A Cells: All LithiumPro batteries use only traceable UL-listed cells that are matched for voltage, internal resistance, and capacity before assembly.Pre-Charge Protection: An essential safety feature that prevents dangerous surging currents, sparking, and arcing when connecting the battery to high-load devices like large inverters, thereby protecting the BMS and connected electronic devices from irreparable damage. 250A Battery Management System (BMS): This powerful BMS enables you to continuously draw 250A allowing you to run most household appliances up to 3200W when using an inverter. 1-5A Active Balancing: Integrated into LithiumPro’s proprietary BMS, the advanced variable 1-5A active balancer maintains optimal balance among the Grade-A LiFePO4 cells by distributing voltage between cells during the charging cycle. This advanced technology provides enhanced battery performance, extending lifecycle, and improving safety, as a well-balanced battery performs better and operates more reliably, no matter what charger you use. Battery Isolation: This advanced safety and protection feature allows you to safely isolate your battery during maintenance and completely disconnect it from its loads for winterisation with the press of a button. No more fumbling around trying to disconnect large battery cables. SMARTIQ BMS: Equipped with LithiumPro’s proprietary SMARTIQ Battery Monitoring System APP. This advanced industry-leading APP is designed to monitor your battery’s health and state-of-charge (SOC) remotely in real-time from your smart device using the latest wireless technology. Heated Cell Technology: Standard in all SMARTCOMM Series batteries, enabling safe charging at sub-zero temperatures to ensure continued operation in all climates. Advanced CANBUS/RS485 Connectivity: Available on all SMARTCOMM Series batteries, this industry leading connectivity enables seamless communication between multiple batteries and inverters such as Victron and Mastervolt. It can communicate with a wide array head units and displays like Victron GX, Ekrano, or marine NMEA-compliant devices such as CZONE, SIMRAD, RAYMARINE to display vital battery parameters. Download the datasheet here > For Victron GX or NMEA ‘Plug & Play’ communication make sure you add a Smartcomm Series data cable to your order 12v 280ah Seatbase lithium battery One of the unique features of the SMARTCOMM SERIES is the latest onboard safety mechanism, which protects the battery and connected electronics from dangerous arcs and sparks caused by powerful inrush currents when connecting to high-powered inverters. This 280Ah battery, equipped with an advanced proprietary 250A BMS, which has the capability to run any household appliance up to 3200W when connected to a capable inverter, allowing you operate a ‘GASLESS’ system with plenty of spare capacity. The SMARTCOMM SERIES from LithiumPro offers seamless Plug & Play integration via CANBus, allowing these batteries to communicate effortlessly with inverters, chargers, VictronGX, Ekrano, and any NMEA2000 compliant head unit, including CZONE, SIMRAD, and RAYMARINE. This enables the sharing of live system data for optimal performance and enhanced monitoring capabilities. This battery is a genuine ‘PLUG & PLAY’ direct replacement for your lead-acid battery. If your motorhome or caravan has a lead-acid (CCCV) Constant Current Constant Voltage based charger that charges between 14.2v -14.6v you can install this battery and it will charge just fine, without the need to fit any other components. It will fit in exactly the same place as your old 95-110ah Lead acid battery and will charge using your existing CCCV charger. Of course, should you wish to upgrade to a more powerful, dedicated lithium charger with a LiFePO4 profile, it will charge much faster and more efficiently, but it is NOT a requirement with our batteries. This state-of-the-art lithium battery is part of a new range from Lithium Pro Energy called SMARTCOMM SERIES offering market-leading features embedded within the battery as standard. One of the many unique features of the SMARTCOMM SERIES is the latest onboard safety mechanism, which protects the battery and connected electronics from dangerous arcs and sparks caused by powerful inrush currents when connecting to high-powered inverters. This powerful 280ah Seat base battery, is equipped with an advanced proprietary 250A BMS, which has the capability to run any household appliance up to 3200W continuously when connected to a capable inverter, allowing you to run high powered devices from a single lithium battery, saving the need to purchase two lithium batteries. Additionally, the new integrated battery isolation safety feature enables you to completely isolate your battery from its loads when maintenance is required, ensuring convenience and safety. Alternatively, you may wish to simply winterise your system at the touch of a button. All SMARTCOMM SERIES batteries have our latest intelligent self heating technology on-board that allows the battery not only be discharged in sub-zero conditions but to more importantly also be CHARGED in sub-zero climates. MECHANICAL SPECIFICATIONS Model 175ah ARCTICXTREME V2 280ah SEATBASE 460ah ENDURAVOLT Dimensions (LxWxH) mm 357x176x189 320x280x180 522x269x220 Weight 15kgs 29kgs 38kgs Cycles ≥4000 @ 80% DOD ≥8000 @ 80% DOD ≥4000 @ 80% DOD IP Rating IP65 (if not using CANbus) IP54 IP65 (if not using CANbus) Terminal Type SAE Brass post with M8 threaded Insert M8 threaded Insert M8 threaded Insert Cell – Prismatic (LiFePO4) EVE LF173 EVE LF280K EVE LF230

...Read more View Product

£599.00

Indel B Cruise 65 Compressor Fridge

Indel B Cruise 65 refrigerator features a small freezer compartment, adjustable thermostat, inner light, a wire shelf and two inner door balconies designed to hold half litre bottles and cans. The unit’s wire shelf can be lifted on one side to allow for tall bottles. The fan-cooled compressor unit is integrated on the upper rear part of the refrigerator. A new simple "easy-fix" rapid installation mounting mechanism for vans has been added to the 2022 Cruise line. With new inox interior elements, the contemporary design is both useful and practical. Brand Indel B Type Integrated Fridges Voltage Description 12V - 24V DC Model Cruise 65 Height Description 530mm Width 450mm Depth 515mm Weight 18.2kg Colour Black Wattage 50W Approvals CE, E-Mark certifications, with SECOP BD35F Compressor Consumption 12-24V DC 0.288 kWh/24hr Capacity Description 65 Litres (17.1 US Gallons)Indel

...Read more View Product

£539.99

Victron 185w Solar Panel Kit with 500w Inverter

Complete 185W Victron Energy Solar Panel Kit with 500w Inverter. Perfect for Campervans, Motorhomes & Boats. (This kit does not include Batteries) This kit is ideal to provide solar charging and 230v power for campervans, motorhomes, yachts, boats, cabins and static caravans that need a small amount of 230v power to power appliances such as lights, chargers and fans. Kit Includes: 185w Victron Monocrystalline Solar Panel ( 1448mm x 668mm )Victron 75/15 Smartsolar MPPT Charge ControllerVictron Phoenix 500kva Inverter6 Piece Roof Mount KitDouble Entry Roof Gland50amp Switchable Circuit Breaker5m 6mm Solar Extension Cables with MC4 Connectors20amp Fused MPPT to Battery Cables2m of Red & 2m of Black 25mm Battery Cable2 x BusBarsBattery Lugs What will 185w power? The 185w Victron solar panel is super efficient and given reasonable weather conditions will keep up with the average usage of the following 12v Appliances: LED Lighting - 15w USB Charging - 18w 40-60 Litre Fridge - 60w Roof Fan - 25w Diesel Heater - 30w 12v TV - 40w What 230v Appliances will the Inverter power? Laptop Charger - 80w PS5 / XBox - 250w 230v TV - 60w Projector - 50w Need to modify this kit or ask a question? GET IN TOUCH Wiring Diagram

...Read more View Product

£1,099.40

Victron 925W Monocrystalline Solar kit with SmartSolar 150/60 MPPT, Mounts, Cables & MC4s

925W Victron Energy Mono Solar Panel Kit - Perfect for Campervans, Motorhomes, Boats & Narrowboats 5 x 185w Victron panels - Panel sizes are 1485x668x30mm This kit is designed for the panels to be joined in series, mounts are optional. This 925w Large Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 150/60 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 10m black extension leads Full Kit with Victron 5 * 185W Monocrystalline panels, OPTIONAL 5 * plastic corner fixing bracket sets or 5 * Aluminium Solar Bracket sets, Cable entry Gland, Victron SmartSolar Bluetooth enabled 150/60 MPPT charge controller, 10m of Black PV Extension Cable s(x2) with MC4 Connectors, Mounts available (optional): 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets This highly efficient Victron solar 925w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Wiring guide for Solar Panel Kits in Series

...Read more View Product

£58.14

Blue Sea 2126 BS2126 MaxiBus 6x5/16 Stud Common

Blue Sea Systems MaxiBus 250A BusBar - Six 5/16"-18 Studs BS2126 Blue Sea 2126 Busbars are used to consolidate multiple wires or feed multiple circuits Insert molded stainless steel studs eliminate need for securing nut and allow high torquing for excellent electrical contact Raised bus provides easy access to multiple wires on a single stud UL 94-V0 rated base material resists high heat Recessed mounting holes eliminate accidental shorts to aluminum and steel mounting surfaces

...Read more View Product

£39.99

Waterproof 15A 12V/24V MPPT solar charge controller for Caravans, Motorhomes, Campervans & Marine Applications

This high quality waterproof 15A 12V/24V solar charge controller is designed to protect batteries whilst charging them, with a full range of automatic protection features. The controller uses high efficiency MPPT charging technology to get the most possible power out of your solar panels. This controller stops reverse current (from the battery back to the solar panel) so your battery won't lose any charge at night and can be left permanently connected. It has many other protection functions such as over charge / discharge shut-off, over load and short circuit protection for the load terminals, overheating protection for the battery and more. This controller can work with sealed/AGM, gel and flooded/wet batteries. With a wide range of solar input voltages (up to 55V) this controller can work not only with standard off-grid solar modules, but also with on-grid panels which have higher voltage. The controller can accept up to 200W (in a 12V system) or 400W (in a 24V system) of solar panels which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a camper van or boat. In addition, the solar charge controller is completely sealed with a very high degree of water protection. It is absolutely safe to use this solar controller in all weather conditions. With the remote IR programmer (purchased separately), this controller can be wirelessly monitored and adjusted. The controller has a fully programmable timer with dimmer functionality, which monitors the dusk and dawn times based on the solar panel voltage and can adjust the percentage power of the load in 5 independently timed stages, making this controller ideal for outdoor lighting systems. Controller specifications: Protection rating: IP67 Default charging program: Gel Current rating: 15A Max solar input power: 200W (12V system) / 400W (24V system) Max solar input voltage: 55V Self-consumption: 6mA Ambient conditions: -35 – +60°C, 0 – 100% RH humidity, <4000m altitude Dimensions: 85.8 x 145 x 30 mm Weight: 600g Mounting holes for ease of installation

...Read more View Product

£4,286.99

Sprinter, Crafter , Boxer - Full Electrical Off-Grid Camper conversion kit with Monitoring

Full Electrical Off-Grid Campervan conversion kit with Colour Touch Screen Monitoring - Ideal for larger vans such as a Sprinter/Crafter/Boxers Victron & Fogstar - the perfect combination 370w of Victron Solar300ah Fogstar Drift PRO Lithium Battery30amp Victron DC to DC Charging Kit3Kw Victron Multiplus II inverter chargerColour Touch Screen Monitoring with Victron Cerbo This full electrical conversion kit is designed for the larger van conversion. The combination of the large 300ah Lithium battery, 370w of solar and the battery-to-battery charging system will give you all of the off-grid independence you need. This kit is perfect for those that want to run large home appliances and are looking to spend extended time in the van (long weekends, short holidays) and comes with a Colour Touch Screen and a Victron Cerbo unit for advanced Monitoring The large Multiplus-II inverter charger will power nearly all of your home appliances whilst off-grid and simultaneously charge your lithium battery whilst hooked-up enabling the use of just one set of 230v sockets within the vehicle. This kit comes with the Victron Cerbo monitoring system along with the Victron Touch 50 Colour screen. Our kits can be expanded or altered as required so if this kit doesn't achieve exactly what you are looking for give us a ring for a friendly chat. Our free Campervan and Motorhome Electrical & Solar Design Service will ensure the kit you receive is exactly what's required. Our Full Electrical & Solar Conversion Kit Contains: Victron 370W Monocrystalline Solar kit with SmartSolar 100/30 MPPT, Mounts, Cables Victron Energy MultiPlus-II 12V 3000VA 120A 32A – PMP122305010Drift PRO 12V 300Ah LiFePO4 Leisure BatteryVictron CerboVictron Touch 50 Colour ScreenVictron Orion-Tr Smart 12V 30A Non Isolated DC-DC B2B Split Charge KitVictron Bluetooth VE.Bus Dongle Victron Energy Fuse holders for MEGA-fuses – CIP000100001Victron Energy - Battery switch ON/OFF 275A - VBS127010010Battery Cable 70mm 485 amp High Quality Extra Flex CableBattery Crimp Cable Lugs 8mm Hole for 70mm Cable (Sold in 1's)Mega FusesBlue Sea 5026 BS5026 Fuse Block ST Blade 12 CircuitsBattery Cable 10mm 70 amp High Quality Extra Flex CableFlush Mains Inlet Black or WhiteCaravan, Campervan Mains Consumer Unit RCCB + 2 MCBSmall 240v IP Rated Enclosure with 16amp Dual Pole MCB10m x 2.5mm² 3 Core Arctic Flex - BlueVictron Energy Busbars 250A 6P +Covers30m x 2.5mm twin core 12v cable for lighting, pumps etc • All Victron equipment comes with a 5-year manufacturer warranty • Fogstar batteries come with a 10-year manufacturer warranty • Wiring Diagrams and installation guides available after purchase • As much after-sales support as is required (email, phone, live chat) • All products are in stock and available for delivery within 2 working days

...Read more View Product

£682.99

Victron Energy Lithium SuperPack 12,8V 100Ah (M8) High Current – BAT512110710

Victron Energy Lithium SuperPack 12,8V 100Ah (M8) High Current – BAT512110710 The SuperPack batteries are extremely easy to install, not needing any additional components.The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. The batteries can be connected in parallel. Series connection is not allowed. Features Integrated BMS and safety switch The SuperPack batteries are extremely easy to install, needing no additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. Abuse proof A lead-acid battery will fail prematurely due to sulfation: If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged). If it is left partially charged or worse, fully discharged. A Lithium-Ion battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of Li-ion compared to lead-acid. The SuperPack batteries will cut-off the charge or discharge current when the maximum ratings are exceeded. Efficient In several applications (especially off-grid solar), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%. The round-trip energy efficiency of a Li-ion battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy are required (battery operating in 70% to 100% charged state). In contrast, a Li-ion battery will still achieve 90% efficiency even under shallow discharge conditions. Can be connected in parallel The batteries can be connected in parallel. Series connection is not allowed. Use in upright position only. Brand Victron Energy Manufacturer Part Number BAT512110710 gtin 8719076053019 Voltage 12.8V Battery Capacity (C20) 100Ah Terminal Type M8 Terminal Layout Left Hand Positive Dimensions (Including Terminals) H220 x W330 x D172mm Weight 14Kg Warranty 3 Years Battery Technology Lithium Battery Application Deep Cycle Country of Manufacture China

...Read more View Product

£26.16

Blue Sea 5133 BS5133 Fuse ANL 300A

ANL Fuse - 300 Amp BS5133 Blue Sea 5133 Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only) Silver-plated connector blades for corrosion resistance Visible indication of blown condition 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks For use with Blue Sea Systems' ANL Fuse Blocks

...Read more View Product

£414.99

100w SUNPOWER Flexible Solar Kit with Victron SmartSolar MPPT 75/15

100w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop-top roofs) SUNPOWER & VICTRON - THE PERFECT COMBINATION - 5 YEAR WARRANTY! This 100w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes, and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 100w SUNPOWER Semi-Flexible Durable Solar Panel Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) Double entry Roof Gland 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 5-year warranty on the Solar Panel 5-year warranty on Victron MPPT Solar Panel Specifications: Dimensions: 45.9"(L) x 21.9"(W) x 0.1"(W) (0.8" including J-Box) Weight: 4.4lbs - Lightweight, Portable & Easy to Stow Rated Voltage (Vmpp) 17.1V | Rated Current (Impp) 5.9A - Powerful Flexible up to 30 degrees - Suitable for Irregular Surfaces 32 high efficiency (23%) monocrystalline Maxeon™ Gen II prime solar cells - More Power in Less Space Premium cosmetic quality Junction box with by-pass diode has IP67 protection- Robust Design, Water & Dust Proof! 17.7" long cables (12AWG) with PV4-S Connectors (MC4 compatible) - Reliable & Safe with IP68 Protection 6 x 316 Stainless steel grommets (5/16" I.D.) - Diverse Installation Options 5-Year power & 2-Year product warranty (no salt water exclusion) - Backed by SunPower Solar cells are made in the Philippines. The panel is assembled in France Individually packaged & protected for shipping. Includes safety & installation guide Solar cells made in the Philippines Solar panel assembled in France MPPT Specifications The Victron 75V 15amp MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£244.99

Victron Energy Filax 2 Transfer Switch CE 110V 50Hz-120V 60Hz – SDFI0000110

Victron Energy Filax 2 Transfer Switch CE 110V 50Hz-120V 60Hz – SDFI0000110 The Filax 2 has been designed to switch sensitive loads, such as computers or modern entertainment equipment from one AC source to another. The priority source typically is the mains, a generator or shore power. The alternate source typically is an inverter. With its switching time of less than 20 milliseconds, sensitive loads will continue to operate without disruption. The Filax is not intended to supply high power household equipment like washing machines or electric motors. Open transition transferThe Filax is an open transition (break before make) transfer switch.The maximum load transfer time is 16ms.The load is normally supplied by the priority source, and is transferred to the alternate source if:– The voltage of the priority source drops below the threshold value.– The frequency of the priority source drops below the low frequency threshold value, or increases beyond the high frequency threshold value.Reverse transfer from the alternate source to the priority source is initiated when the priority source has operated within the voltage and frequency reverse switching limits during 30s. Brand Victron Energy Manufacturer Part Number SDFI0000110 gtin 8719076025689 Max. Current 16 A Ingress Protection IP65 Dimensions (Including Terminals) H120 x W255 x D75mm Weight (kg) 0.8 Warranty 5 Years Country of Manufacture Malaysia

...Read more View Product

£409.99

Sterling Power Battery to Battery Charger, Non Waterproof 12/24V 70A – BB122470

Sterling’s range of Battery to Battery Chargers (B2Bs) has grown significantly over the past few years. Offering a product range in this market un surpassed by anyone in both power and flexibility. This is in an effort to supplement the ever growing demand from the commercial vehicle, recreational vehicle and marine industries. The B2Bs have become extremely popular as they fast charge batteries as you cruise along without the need for complex wiring, touching your alternator, voiding the alternator’s warranty and tampering with the electronic control units (ECUs). You can provide the onboard batteries with a fast 4 stage charging profile with a very simple and speedy installation. All of the benefits of advanced charging without any of the draw backs. Simply connect the B2B between the battery being charged and the battery you wish to charge. Features Multiple Activation Modes: Automatic for most non vehicle applications Manual for remote activation. Regenerative braking (requiring ignition feed), Automatic regenerative braking, requiring no ignition feed. Output charging at 12V, 24V, 36V and 48V. Input voltages at 12V and 24V, Up to 800W rating. Much larger model up to 3000W coming soon. Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mde allows you to override this. Safety features 100% fire proof plastic box. No screws to corrode. Thermal power reduction. Multi stage fan cooling Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down. Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages. B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V). Customizable Profile: Choose your own charging profile on the front panel. 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid. 4 stage battery charging: Thge B2B charges batteries between 5-20 times faster than a stand alone alternator. Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking). Remote control optional. DC to DC (Battery to Battery) Wiring Diagram, Information and Help Brand Sterling Power Manufacturer Part Number BB122470 DC V (in) 12 DC V (out) 24 Current (A) 70 Dimensions L190 x W160 x D70mm Weight (kg) 1.4 Warranty 2 Years

...Read more View Product

£166.00

Blue Sea 7649 BS7649 Solenoid Mini Add A Battery

Blue Sea 7649 BS7649 Solenoid Mini Add A Battery The ADD-A-BATTERY is as simple to operate as an ON-OFF switch, yet effectively manages the switching and charging of two batteries from a single charge source The Add-A-Battery includes a Dual Circuit Plus™ Battery Switch and an Automatic Charging Relay. These components simplify switching and automate charging so that all you have to do is turn the battery switch ON when you arrive and OFF when you leave. Dual Circuit Plus™ Battery Switch Simplifies switching Isolates engine and house circuits Combines batteries for emergency starting Tin-plated copper studs for maximum conductivity and corrosion resistance ACR Automatic Charging Relay Automatically combines batteries during charging Isolates batteries during engine cranking and when not charging Shares the charge between two batteries more efficiently than a battery isolator Allows efficient dual battery charging without needing regulator adjustment or rewiring

...Read more View Product

£102.00

Blue Sea 2104 PowerBar 4x 3/8-16 Stud Terminal BS2104

PowerBar 4x 3/8-16 Stud Terminal Blue Sea 2104 BS2104 Made from ABS (strong nylon) and mounting plate wires / cables made of nickel-plated brass. terminals 4x 3/8 ?, dimensions 117 x 51 mm Continuous Amperage: 600 Amp. Volt max: 48 V. DC 300 V. AC

...Read more View Product

£2.45

Berker Single Backing Box W4 21261

Berker Single Backing Box W4 21261 Single backing box with external double cable clamp.49mm diam.With 2 line entries on rear and 1 knockout opening.Insertion depth 45.5mm.Flame resistant according to VDE 0606-1

...Read more View Product

£76.99

Blue Sea 7136 - BS7136 187-Series Circuit Breaker - Surface Mount 30A

Combines switching and circuit protection into a single device* Clear, single lever operation "Trip Free" design cannot be held "ON" during fault current condition Waterproof Recessed mounting holes for clean appearance Large Clearance around terminal studs accept heavy gauge wire lugs Robust 5/16 M8 terminals provide high torque connections Large lever with vertical/horizontal orientation provides indication of trip status Ignition protected - Safe for installation aboard gasoline powered boats Meets SAE J1171 external ignition protection requirements Amperage 30A Maximum Voltage 48V DC Mounting Surface Mount Circuit Breaker Type Thermally responsive Bi-metal blade Terminal Stud Torque 75 in-lb (8.47 Nm) Interrupt Capacity 5000A @ 14VDC3000A @ 28VDC1500A @ 48VDC Minimum Operating Temperature -40° C Maximum Operating Temperature 85° C Case Material Thermoset Polyester Circuit Breaker Class Type III - switchable/manual reset - trip free Mounting Hole Accept #10 (M5) Screw Terminal Stud Size 5/16" - 18 Weight 0.58lb (0.26 kg) Weight 0.58lb (0.26 kg)

...Read more View Product

£388.00

MPK Vision Star L Pro 700 x 500 Vented Rooflight

MPK VisionStar L Pro Rooflight Comes with double glazing impact-resistant poly-carbonate dome. This version offers permanent ventilation and comes complete with pleated flynet and blind. Aperture : 700 x 500 mm. Dome size : 815 x 583 mm. Inner frame size : 872 x 610 x 37 mm. Brand MPK Type Roof Vent Size 700 X 500mm Weight 3680g

...Read more View Product

Out of Stock

£208.99

Rolls AGM Battery R12-110AGM

Specifications Weight 30 kg 66 lbs Length 32.8 cm 12.91" Width 17.2 cm 6.77" Height Inc. Term. 22 cm 8.66" Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels. Container ABS Cover ABS Handles Rope / Plastic Handle Series AGM-R Warranty See Warranty Terms Volts 12 BCI Grp 31 Cells 6 Terminal Type DT Included Hardware Stainless Steel Nuts & Bolts Size & Thread DT Charge Charge Voltage Range 14.7V @ 25°C (77°F) Float Voltage Range 13.8V @ 25°C (77°F) Recommended Charge Current 20 A Maximum Charge Current 35 A Self-Discharge Rate Less than 2% per month at 25°C (77°F) Internal Resistance 9 mΩ Capacity Cold Crank Amps (CCA) 0°F / -18°C 760 Marine Crank Amps (MCA) 32°F / 0°C 910 Reserve Capacity (RC @ 25A) 205 Minutes Reserve Capacity (RC @ 75A) 65 Minutes Capacity Affect by Temperature 40°C(104°F) 25°C(77°F) 0°C(32°F) -15°C(5°F) 102% 100% 85% 65% Hour Rate Capacity / AMP Hour Current / AMPs @ 100 Hour Rate 120 AH 1.2 A @ 20 Hour Rate 110 AH 5.5 A @ 10 Hour Rate 90 AH 9 A @ 5 Hour Rate 82 AH 16.4 A Cut Off Voltage Constant Current Discharge VPC 1 hr 2 hr 3 hr 5 hr 8 hr 10 hr 60.6 32.5 28 16.4 10.6 9

£163.14

ROKK Wireless - Active 10W Waterproof Phone Charging Mount 12/24V

Input Voltage Range: 10-30V DC Max Input Current: 2A Output Power: 10W (9v, 1.1A) Standby Power Draw: < 0.2W Waterproof Rating: IPX6 Qi-certified The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment, without the need for phone charging cables. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use onboard, with the unique technology is housed in an IPX6, fully encapsulated and sealed unit. Perfect for boat consoles or any vehicle working outside in the elements, the simple one-handed operation allows anyone to easily dock their phone and instantly start charging. No connection needed. The high-grip, self-aligning jaws ensures the phone is held tightly and in the optimum charging position every time. Featuring Qi-certified wireless charging technology and a “Smart” LED that indicates when the phone is charging. Throw in foreign object detection and thermal cut-off to provide guaranteed safe, reliable charging in all environments. Compatible with wireless charging enabled phones of all sizes from all major brands including Samsung, Apple and many more. Charging is also possible through non-metallic, waterproof cases. The new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. The improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve the phone's charge times, even in the harshest outdoor environments. With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions. Testing: ROKK Wireless Active has been subjected to our harshest environmental, vibration, impact and on-water testing programs. This is combined with our world-renowned expertise in waterproofing technologies, UV stabilization techniques and premium grade materials to ensure Active is the best and only choice to make when it comes to mounting and wirelessly charging phones outdoors. Installation: Installation is simple on any boat, RV, ATV or outdoor location. Four screws secure the unit onto any flat surface with a simple installation guide and drilling template. A waterproof cable pass-through completes the IPX6 sealed installation. The charger is easy to clean and can be washed down with fresh water. Product Videos <br> Rokk Wireless Active - In 30 Seconds Rokk Wireless Active - Detail / Installation Wireless Charging Explained

...Read more View Product

£49.74

ROKK Charge + Waterproof USB Socket

Universal fit for any USB Type-A connector. Charge up to 2 devices at a time. Easy Install Click & Lock Lid Output current 4.2A (total) IPX6 waterproof with cover closed. Up to 3x faster than standard USB sockets. Waterproof with 1, 2 and even no cables plugged in Anti-corrosion coating on circuit board. UV resistant. 316 stainless hinge and spring. Ultra low profile: only 29mm high, 94mm long. Anti-snag cover aligns cables when closed. Standard barrel size also fits existing USB sockets. The ultimate rapid charge waterproof USB charger with dual socket connectivity that can charge up to 2 devices up to 3x faster than standard USB sockets. Featuring an ultra low profile, that is perfect for any outdoor application. It's easy to install and marine ready thanks to its anti-corrosion coated circuit board, UV resistant and 316 stainless hinge and spring. The unit remains IPX6 waterproof with 1, 2 and even no cables plugged in. The anti-snag cover aligns cables when closed.

...Read more View Product

£28.32

ROKK Mini Suction Cup Mount

Use with ROKK Mini adjustable mounts range to attach your electronics to boats, cars, off-road vehicles, aircraft and more. Move your electronics conveniently between locations or vehicles. Compact in size, big on performance: this high strength, outdoor ready Suction Cup Base is engineered better for longer lasting grip. Fits to any rigid, clean, smooth, non-textured surface*, Tough, marine-grade, UV stable materials. Mounts quickly with over-centre locking arm. No tools required. Safety lock prevents accidental release when ROKK Mini adjustable body is attached. Suitable for sticking to: GRP Glass Smooth non-porous surface *Not for use on surfboards, snowboards or other high-impact sports.

...Read more View Product

£496.49

VICTRON ENERGY 12V 220AH AGM DEEP CYCLE BATTERY - BAT412201085 (M8)

The Victron Energy 12V 220Ah AGM battery has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches. Features of the 12V 220Ah AGM battery Sealed (VRLA) AGM BatteriesAGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of high currents than gel batteries. Low Self-DischargeBecause of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The self-discharge doubles for every increase in temperature by 10°C.Victron VRLA batteries can therefore be stored for up to a year without recharging, if kept under cool conditions. Exceptional Deep Discharge RecoveryVictron VRLA batteries have exceptional discharge recovery, even after deep or prolonged discharge.Nevertheless repeatedly deep and prolonged discharge has a very negative effect on the service life of all lead acid batteries,Victron batteries are no exception. Battery Discharging CharacteristicsThe rated capacity of Victron AGM and Gel Deep Cycle batteries refers to 20 hour discharge, in other words: a discharge current of 0,05 C.The rated capacity of Victron Tubular Plate Long Life batteries refers to 10 hours discharge.The effective capacity decreases with increasing discharge current. Please note that the capacity reduction will be even faster in case of a constant power load, such as an inverter. Brand Victron Energy Manufacturer Part Number BAT412201085 GTIN 8719076037095 Voltage 12V Battery Capacity (C20) 220Ah Cold Cranking 650CCA Terminal Type M8 Terminal Layout Side Dimensions (Including Terminals) L522 x W238 x H240mm Weight 65Kg Warranty 2 Years Country of Manufacture Vietnam Battery Technology AGM Battery Application Dual Purpose

...Read more View Product

£159.00

Ecoflow 100w Black Solar Panel x 2

ECOFLOW 100W BLACK RIGID SOLAR PANEL X2.When there is no power supply to connect to the EcoFlow 100W Rigid Solar Panel is the perfect solution to recharging your EcoFlow Power Kit Batteries or portable power station. The EcoFlow rigid solar panel is constructed with monocrystalline silicon cells which are highly efficient and reliable. The solar panel has been designed to work with the EcoFlow Power Kits, or the EcoFlow range of portable battery generators.The EcoFlow 100W rigid solar panel is an efficient, solid solar panel and comes with pre-cut holes on the panel ready to mount on your van or off-grid build. Weighing in at just 6.2kg each the EcoFlow solar panel can attach to any surface with the aid of the rigid solar panel mounting feet. EcoFlow rigid solar panels can be connected in series or parallel to generate extra charging capacity. With the MC4 output this EcoFlow rigid solar panel can connect to any of the EcoFlow Power Kits or other EcoFlow portable power station and other portable battery generators.IS THE ECOFLOW 100W RIGID SOLAR PANEL WATERPROOF AND DURABLE?Being of a waterproof construction (Waterproof IP Rating: IP68) the EcoFlow 100W rigid solar panel can withstand all weather conditions. The panel can withstand dirt, low-pressure water jets, extreme winds of up to 130 mph, and even heavy snowfalls.WHAT’S IN THE BOX2 x EcoFlow 100W rigid solar panel, 2 x Rigid Solar Panel mounting feet, User Manual and Warranty CardMAIN FEATURES:Model 100W Rigid Solar PanelRated Power: 100 W（+/-5W）Cell Type Monocrystalline SiliconOUTPUT:Power 100 WRated Power: 100 W（+/-5W）Open Circuit Voltage 20.3 VShort Circuit Current 6.3 ATemperature Coefficient of Open Circuit Voltage -0.33%/°CTemperature Coefficient of Short Circuit Current 0.06%/°CMaximum Operating Voltage 17.1 VEFFICIENCY:23%CELL TYPE:Monocrystalline siliconWATERPROOF IP RATING:IP68DIMENSIONAL DATA:Length (L) cm 98Width (W) cm 58.6Height (H) cm 3Weight Kg 6.2

...Read more View Product

£989.99

Iconica 6000W 48V Off Grid Inverter With Zero Transfer, 6000W Solar Input, 120A Mppt, 120A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica 6000W 48V hybrid inverter intelligently combines the functions of a 6000W pure sine wave inverter, 120A MPPT solar charge controller and a 120A smart battery charger in one single unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its hybrid capability, this innovative inverter features zero transfer time which enables instant 0ms transfer from mains to battery mode when the mains power is interrupted. In addition the inverter has advanced communication functions including inbuilt Wi-Fi, along with a menu full of highly customisable settings. This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features a zero transfer time Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts, and cabins or narrowboats, yachts etc), IT systems requiring continuous operation in case of power failures, as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts. Key functions: 1. 6000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 6000W of continuous power with a strong peak power handling capability of up to 12000VA (to start appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 120A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 120A Smart battery charger: Designed to enable safe, efficient and fast (up to 120A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages. 4. UPS zero transfer time: Offers instant 0ms transfer from mains to battery mode when mains power is interrupted (normal speed of transfer for other inverters is 15-20ms). This improved UPS functionality allows critical IT loads such as computers and servers to operate continuously in case of power failures. 5. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 8 further inverters), offering the possibility of large scale system expansion, with up to 54kW/54kVA of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately). 6. Inbuilt Wi-Fi connectivity: The integrated Wi-Fi function allows the inverter to be monitored remotely via the Watchpower mobile app - a free mobile app available for Android and iOS devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc. Additional intelligent features: The Iconica 6000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include: - Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc. - Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc. - A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - Illuminated removable LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc. The LCD display is removable and can be positioned up to 20m away from the inverter for remote system monitoring (requires additional basic RJ45 connection cable – not included). - Advanced communication options: In addition to the integrated Wi-Fi feature, this inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit (purchased separately). By connecting via this method, the user will unlock access to exclusive features such as email status updates for the inverter, remote system monitoring from any location and much more. - USB On-the-Go function: The inverter is supplied with a USB drive which allows the user to facilitate upload/ download of system data. - Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level. - Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. Compatibility: This hybrid inverter is suitable for 48V flooded and sealed GEL/AGM lead-acid and lithium batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries. Please note that in order to enable the solar charging or direct operation of the loads from solar panels, your solar array must meet the minimum MPPT input voltage requirement of the inverter of 120V (several solar panels connected in series). Inverter specifications: Nominal battery voltage: 48V Continuous power output: 6000W/6000VA (220-240V AC) Surge power: 12000VA Output frequency: 50Hz - 60Hz Output waveform: Pure sine wave Maximum solar input power: 6000W Maximum solar input current: 27A Maximum open circuit solar input voltage: 500V (open circuit) MPPT operating solar voltage: 120 - 430 V Maximum solar charging current: 120A Maximum mains AC charging current: 120A Maximum combined charging current: 120A Peak efficiency: 92% Operating temperature: -10°C to 50°C Supplied with USB drive, PC connection cable and PC software CD Size: 140 x 295 x 468 mm Weight: 12 kg

...Read more View Product

£1,124.99

Off Grid Solar Kit - 1Kw Hybrid Inverter - 370w Solar - 250ah AGM Battery Storage

370w 12V Complete Off-Grid Starter Solar Power System With 2 X 175W Solar Panels, 1Kw Hybrid Inverter And 2 x 125ah of AGM Battery Storage This Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for small household appliances and lighting in areas without access to or without stable mains electricity. This kit can provide power to small and medium household or office appliances such as a fridge, TV, radio, lights, or computer.This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including a Victron solar panel and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high-efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.Kit includes:2 x 185W Victron solar panelsIconica Hybrid 1000W 12V pure sine wave inverter2 x 125Ah AGM deep cycle leisure batteries50ah circuit breakerA pair of 5m 6mm2 solar extension cables with MC4 connectors8m of 25mm2 tinned copper battery cablesBattery Lugs2 x 6 Piece Solar panel Mount Kit or Z Brackets1 x Double Entry Roof Gland1 x Victron Battery Kill Switch1 x Meg Fuse & Holder This kit can easily be expanded with additional solar panels and battery storage at any stage. The Iconica 1000W 12V hybrid inverter intelligently combines the functions of a 1000W pure sine wave inverter, 40A MPPT solar charge controller and a 20A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings. This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts. Key functions: 1. 1000W 12V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 1000VA of continuous power with a strong peak power handling capability of up to 2000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 40A MPPT solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 20A Smart battery charger: Designed to enable safe and efficient unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages. Additional intelligent features: The Iconica 1000W 12V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include: - Output source priority: This intelligent feature allows the user to set output source preferences(solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc. - Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc. - A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.Our AGM deep-cycle batteries are non-spillable, completely sealed and maintenance-free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate. Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Brand Victron Energy Manufacturer Part Number SPM041851200 GTIN 8719076040361 Voltage 12V Nominal Power 185W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Dimensions L1485 x W668 x D30mm Weight 11Kg Warranty 5 Years Hybrid inverter specifications: Nominal battery voltage: 12V Continuous power output: 1000W / 1000VA Surge power: 2000VA Output voltage: 230V AC Output frequency: 50Hz Output waveform: Pure sine wave Maximum solar input power: 500W Maximum open circuit solar input voltage: 102V Maximum solar charging current: 40A MPPT operating voltage range: 15V – 80V Maximum mains AC charging current: 20A Maximum combined charging current: 60A Peak efficiency: 93% Operating temperature: -10C to 50C Supplied with: 1.5m AC power cable with 3-pin UK plug PC connection cable and software Size: 32 x 22.5 x 8.8 cm Weight: 5 kg

...Read more View Product

£380.00

Victron Energy VE Transfer Switch 10KVA, 1ph, 200-250Vac – COS230103100

The COS230103100 VE Transfer Switch automatically switches between different power sources: between a generator and shore power, between an inverter and a generator, or between an inverter and shore power. The VE Transfer Switch has two inputs and one output, it automatically transfers the available AC power to the output. GTIN 8719076022084 Warranty 5 Years Country of Manufacture Slovenia

...Read more View Product

£3,699.99

Victron Energy Complete Van Conversion Kit - 3000w Multiplus II Inverter, DC to DC Charger & 250ah AGM Batteries

This Van Junkies complete 12V Van Conversion Kit is perfect for any van conversion. This kit uses only the best premium Victron Energy equipment will allow you to charge your battery in several different ways such as solar from the 350W Monocrystalline panels and Victron SmartSolar MPPT 100/30 solar charge controller, battery to battery charging from the Victron Orion-Tr Smart 12/12-30 DC-DC Charger and hook-up power from the 3000w Victron Multiplus II Inverter/Charger. The kit comes with 2 x 125ah AGM batteries and the full Cerbo GX / Touch 50 monitoring system. Everything you need for the perfect campervan/motorhome high-end electrical power installation. All of our kits can be tailored to individual requirements so if you need something different give us a call. The Kit Contains: 2 X Victron Monocrystalline panels (350w total) 175W-12V Mono 1485x668x30mm series 4a SPM041751200 Victron Energy SmartSolar MPPT 100/30 – Solar Charge Controller - SCC110030210 Victron Energy MultiPlus-II 12V 3000VA 120A 32A – PMP122305010 Orion-Tr Smart 12/12V-30A Isolated DC-DC Charger ORI121236120 2 X Lucas 125ah AGM Batteries 2m each of 70mm Red & Black Battery Cable Victron Energy SmartShunt 500A/50mV – SHU050150050 Victron Smart Batteryprotect 220A 12V/24V Battery Over Discharge Protector BPR122022000 (Bluetooth ) Victron Energy Lynx Distributor – LYN060102000 Victron Energy - Battery switch ON/OFF 275A - VBS127010010 MC4 Cable PV Male & Female Connectors Pair Of 5M Single Core Extension Cable Leads 4.0Mm For Solar Panels And Solar Charging Kits 5m x Battery Cable 16mm 110amp High Quality Extra Flex Cable RED 5m x Battery Cable 16mm 110amp High Quality Extra Flex Cable BLACK Victron Energy MEGA-fuse 300A/32V (5 pack) – CIP136300010 1 x 60A/32V Yellow Fuse 1 X Victron Fuse holders for MIDI-fuse (CIP000050001) 5m X Extra Flexible PVC Battery Cable - 70mm² 485A RED 5m X Extra Flexible PVC Battery Cable - 70mm² 485A BLACK 3 X Victron Energy RJ45 UTP Cable 5m – ASS030065000 Victron VE.Direct Cable 5m (ASS030530250)50-8 lugs x 8 Victron Energy GX Touch 50 – BPP900455050 Victron Energy GX Touch 50 Wall Mount – BPP900465050 Victron Energy Cerbo GX – BPP900450100 4m each of 50mm Red and Black Battery Cable Switchable Surface Mount Waterproof Circuit Breaker 50 Amps Double Entry Roof Gland 2 X Set of 4 Heavy Duty Solar Panel Brackets For Roof Or Surface Mounting 6mm Terminal Lugs x 810mm Terminal Lugs x 416mm Terminal Lugs x 1070mm Terminal Lugs x 12Blue Sea 5026 - 12 Way Fuse Box10mm Battery Cable Red & Black x 2m Wiring Diagram

...Read more View Product

£98.65

Victron Shore Power Inlet Stainless Steel with cover 16A/250Vac (2p/3w) SHP301602000

Victron Energy - Power Inlet stainless with cover 16A/250Vac (2p/3w) - SHP301602000 CE-certified shore power inlet with solid cast 316 stainless steel cover. Waterproof IP56 Rating.

...Read more View Product

£5,168.99

Victron Energy Complete Van Conversion Kit - 3000w Multiplus II Inverter, DC to DC Charger & 330Ah LiFePO4 Battery

This Van Junkies complete 12V Van Conversion Kit is perfect for any van conversion. This kit uses only the best premium Victron Energy equipment will allow you to charge your battery in several different ways such as solar from the 370W Monocrystalline panels and Victron SmartSolar MPPT 100/30 solar charge controller, battery to battery charging from the Victron Orion-Tr Smart 12/12-30 DC-DC Charger and hook-up power from the 3000w Victron Multiplus II Inverter/Charger. The kit also comes with the top-of-the-range Victron Energy Smart LiFePO4 330Ah Lithium battery and the full Cerbo GX / Touch 50 monitoring system. Everything you need for the perfect campervan/motorhome high-end electrical power installation. All of our kits can be tailored to individual requirements so if you need something different give us a call. The Kit Contains: 2 X Victron Monocrystalline panels (370w total) 185W-12V Mono 1485x668x30mm series 4a SPM041751200 Victron Energy SmartSolar MPPT 100/30 – Solar Charge Controller - SCC110030210 Victron Energy MultiPlus-II 12V 3000VA 120A 32A – PMP122305010 Orion-Tr Smart 12/12V-30A Non- Isolated DC-DC Charger OrI121236140 Victron Energy Smart LiFePO4 330Ah - BAT512132410 Victron Energy VE.Bus BMS V2 – BMS300200200 Victron Energy SmartShunt 500A/50mV – SHU050150050 Victron Energy Lynx Distributor – LYN060102000 Victron Energy - Battery switch ON/OFF 275A - VBS127010010 MC4 Cable PV Male & Female Connectors Pair Of 5M Single Core Extension Cable Leads 4.0Mm For Solar Panels And Solar Charging Kits 7m x Battery Cable 16mm 110amp High Quality Extra Flex Cable RED 7m x Battery Cable 16mm 110amp High Quality Extra Flex Cable BLACK Victron Energy MEGA-fuse 300A/32V (5 pack) – CIP136300010 Victron 60a/32v Mega Fuse - CIP136060010 (5 Pack) 1 X Victron Fuse holders for MIDI-fuse (CIP000050001) with 60amp Midi Fuse 5m X Extra Flexible PVC Battery Cable - 70mm² 485A RED 5m X Extra Flexible PVC Battery Cable - 70mm² 485A BLACK 2 X Victron Energy RJ45 UTP Cable 5m – ASS030065000 2 x Victron VE.Direct Cable 5m (ASS030530250) Victron Energy GX Touch 50 – BPP900455050 Victron Energy GX Touch 50 Wall Mount – BPP900465050 Victron Energy Cerbo GX – BPP900450100 Switchable Surface Mount Waterproof Circuit Breaker 50 Amps Double Entry Roof Gland 2 X Set of 4 Heavy Duty Solar Panel Brackets For Roof Or Surface Mounting 6mm Terminal Lugs x 8 10mm Terminal Lugs x 4 16mm Terminal Lugs x 10 70mm Terminal Lugs x 12 70mm 10 hole Terminal Lugs x 4 Blue Sea 5026 - 12 Way Fuse Box 10mm Battery Cable Red & Black x 2m

...Read more View Product

£1,889.99

Iconica Max 11000W 48V Hybrid Solar Inverter With 11000W Solar Input, Dual-Input 110A 500V Mppt, 150A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. The Iconica MAX 11000W 48V hybrid inverter intelligently combines the functions of an 11000W pure sine wave inverter, 110A MPPT solar charge controller with two independent inputs and an extremely powerful 150A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings.This inverter features the rare and unique ability to power AC appliances without connection to a battery - directly from solar power.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent, or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g., remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 11000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 11000VA of continuous power with a strong peak power handling capability of up to 22000VA (to start powerful appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 11000W high solar input MPPT Solar charge controller: Two independent solar inputs can each accept up to 5500W of solar power. The MPPT charge controller regulates the input from the solar panels and charges the batteries at up to 110A, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. Advanced MPPT technology extracts the maximum possible output from the solar panels and operates at up to 98% efficiency. This inverter is therefore well-suited to systems with large and powerful solar arrays, or two solar arrays with different panels or light conditions. Performance data for the solar arrays is displayed on the LCD screen.3. Enhanced 150A Smart battery charger: Designed to enable safe, efficient, and fast (up to 150A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 5 further inverters), offering the possibility of large-scale system expansion, with up to 66KW of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately). Additional intelligent features:The Iconica MAX 11000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Load power without a battery: This inverter is able to power AC loads (and itself) directly from the solar input, without the need for a battery bank to be connected to the inverter. By powering loads using the energy directly supplied from the solar panels, this Iconica inverter offers a uniquely independent and versatile power system, free from batteries if preferred. Removing the need for batteries also increases the efficiency of the energy generated from the solar array by reducing the power losses that this transfer of energy would usually cause. However, if a battery bank is available, the inverter can power loads directly from the solar panels whilst the charging batteries at the same time. For example, if 4000W of solar power is flowing into the inverter, 2000W can be used to run appliances whilst the remaining 2000W will be used for charging the battery bank. - Output source priority: This intelligent feature allows the user to set output source preferences (solar/battery power/mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g., which source of energy is given priority for the AC output if solar power is insufficient/if battery voltage is too low/if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/using a combination of solar power and mains power/from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated removable LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc. The LCD display is removable and can be positioned up to 20m away from the inverter for remote system monitoring (requires additional basic RJ45 connection cable – not included). - Customisable RGB light bar: LED indicator strip across the front of the inverter can be programmed to show battery charge level or solar/mains/battery input in customisable colours, allowing you to easily see the system status at a glance.- Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/battery/AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/Excel formats from the PC software. This inverter also has the potential to send data to a mobile app using the built-in wi-fi kit, or to an online user portal a Wi-Fi connection kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email/push notification/SMS status updates for the inverter, remote system monitoring from any location and much more.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1, 2 or 3 fans operating at a time, with variable speeds) to prevent over-heating of the components. Compatibility:This hybrid inverter is suitable for 48V flooded, sealed GEL/AGM lead-acid and Lithium batteries with pre-defined charging programs (consult the battery supplier for advice on Lithium battery charging settings). A user-defined battery type with numerous customisable settings is also available for charging other battery types. Inverter specifications: Nominal battery voltage: 48V Continuous power output: 11000W/11000VA (220-240V AC) Surge power: 22000VA Output frequency: 50/60Hz Output waveform: Pure sine wave Maximum solar input power: 5500W per input (11000W total) Maximum solar input current: 18A per input Maximum open circuit solar input voltage: 500V (open circuit) MPPT solar operating voltage: 90V - 450V Maximum solar charging current: 110A Maximum mains AC charging current: 150A Maximum combined charging current: 150A Peak efficiency: 93% Operating temperature: -10°C to 50°C Supplied with solar connectors, cable glands, PC connection cable and PC Software Size: 147.4 x 432.5 x 553.6 mm Weight: 18.4 kg

...Read more View Product

£939.99

Iconica 5000W 48V Off Grid Inverter With Zero Transfer, 4000W Solar Input, 80A Mppt, 60A Charger

Iconica Off Grid Hybrid Solar Inverter - Pure Sine Inverter - MPPT Solar Charge Controller - Mains Battery Charger. Perfect for Off Grid installations, Home Power Storage & Campervans. Please note this is a 48V system. The Iconica 5000W 48V hybrid inverter intelligently combines the functions of a 5000W pure sine wave inverter, 80A MPPT solar charge controller and a 60A smart battery charger in one single unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its hybrid capability, this innovative inverter features zero transfer time which enables instant 0ms transfer from mains to battery mode when the mains power is interrupted . In addition the inverter has advanced communication functions including inbuilt Bluetooth, along with a menu full of highly customisable settings.This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features a zero transfer time Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts, and cabins or narrowboats, yachts etc), IT systems requiring continuous operation in case of power failures, as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts.Key functions:1. 5000W 48V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, fridge, microwave, lighting etc. Able to generate 5000W of continuous power with a strong peak power handling capability of up to 10000VA (to start appliances with electric motors such as pumps, a vacuum cleaner, power tools etc). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances.2. Inbuilt 80A MPPT Solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array.3. Enhanced 60A Smart battery charger: Designed to enable safe, efficient and fast (up to 60A) unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages.4. UPS zero transfer time: Offers instant 0ms transfer from mains to battery mode when mains power is interrupted (normal speed of transfer for other inverters is 15-20ms). This improved UPS functionality allows critical IT loads such as computers and servers to operate continuously in case of power failures.5. System expansion potential: This inverter has the ability to be connected in parallel with additional identical units (maximum of 8 further inverters), offering the possibility of large scale system expansion, with up to 45kW of power handling capability. Once connected in parallel, there is the option for 3-phase operation (ideal if the system is being used to power industrial grade equipment and machinery run on 3 phase). Each inverter connected in the system will require a parallel connection kit (sold separately). 6. Inbuilt Bluetooth connectivity: The integrated Bluetooth function allows the inverter to be monitored remotely via the Watchpower mobile app - a free mobile app available for Android devices. After downloading the app, simply pair your mobile device with the inverter to gain access to important information such as solar/ battery/ AC voltage, charging current, battery capacity etc.Additional intelligent features:The Iconica 5000W 48V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include:- Output source priority: This intelligent feature allows the user to set output source preferences (solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc.- Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc.- A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings.- Illuminated removable LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc. The LCD display is removable and can be positioned up to 20m away from the inverter for remote system monitoring (requires additional basic RJ45 connection cable – not included). - Advanced communication options: In addition to the integrated Bluetooth feature, this inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit, mobile app Wi-Fi kit or 3G connection kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification / SMS status updates for the inverter, remote system monitoring from any location and much more.- USB On-the-Go function: The inverter is supplied with a USB drive which allows the user to facilitate upload/ download of system data.- Generator auto-start function: If connected to a generator via dry contacts, the Iconica inverter can send a signal to automatically start the generator as soon as the battery voltage drops below a certain level.- Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected.Compatibility:This hybrid inverter is suitable for 48V flooded and sealed GEL/AGM lead-acid batteries with pre-defined charging programs. A user-defined battery type with numerous customisable settings is also available for charging other lead acid batteries.Please note that in order to enable the solar charging or direct operation of the loads from solar panels, your solar array must meet the minimum MPPT input voltage requirement of the inverter of 60V (several solar panels connected in series). Inverter specifications: Nominal battery voltage: 48V Continuous power output: 5000W/5000VA (220-240V AC) Surge power: 10000VA Output frequency: 50Hz - 60Hz Output waveform: Pure sine wave Maximum solar input power: 4000W Maximum open circuit solar input voltage: 145V (open circuit) MPPT operating solar voltage: 60 - 115 V Maximum solar charging current: 80A Maximum mains AC charging current: 60A Maximum combined charging current: 140A Peak efficiency: 93% Solar / AC charger max efficiency: 98% Operating temperature: 0°C to 55°C Supplied with USB drive, PC connection cable and PC software CD Size: 52.5 x 30.3 x 14 cm Weight: 13.5 kg

...Read more View Product

£54.99

20W 12V Polycrystalline Solar Panel With 2M Cable

This waterproof high efficiency 20W solar panel is perfect for permanent outdoor use to provide free power either directly, such as powering a fan or lights, or for charging a 12V battery to then power hundreds of devices such as in a shed, boat or camper van. The long-lasting, high-efficiency, polycrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. The panel comes with 2m cable which is attached to the waterproof junction box at the back. Please note that the junction box goes about 0.5cm beyond the frame, so there must be some space left between the frame and flat surface when mounting the panel (note 1.0 - 1.5cm space under the panel typically recommended for cooling). If you are planning to use this solar panel for charging a 12V battery: please note this panel requires a solar charge controller / regulator to charge a 12V battery. If you don't have one and would like to buy it, please check our shop category with solar charge controllers. If you already have one of our 20W solar panels or kits with a solar controller, you can easily upgrade the power of your kit to 40W by adding this panel in parallel to the existing 20W solar panel (connecting 2 panels: "+" to "+", "-" to "-" and then to the solar controller). Solar panel specifications: Peak power: 20W Maximum power voltage: 17.5V Maximum power current: 1.14A Open circuit voltage: 21.6V Short circuit current: 1.23A Power allowance range: +/- 3% Dimensions: 485 x 345 x 25 mm Weight: 2.0 kg 4 mounting holes 2m cable attached

...Read more View Product

£389.00

Sharp High Performance NU-JD540 540w PERC Solar Panel

Sharp High Performance NU-JD540 540w Solar Panel The High Performer Guaranteed positive powertolerance (0/+5 %) MBB busbar technologyImproved reliabilityHigher efficiencyReduced series resistance High module efficiency 21.0 %PERC monocrystalline siliconphotovoltaic modules Half-cut cellImproved shading performanceLower internal lossesReduced hot spot risk Robust product designPID resistance test passedSalt mist test passed (IEC61701)Ammonia test passed (IEC62716)Dust and sand test passed (IEC60068) 15 YEAR PRODUCT GUARANTEE NU-JD540 Maximum power Pmax 540 Wp Open-circuit voltage Voc 50.34 V Short-circuit current Isc 13.66 A Voltage at point of maximum power Vmpp 41.64 V Current at point of maximum power Impp 12.97 A Module efficiency ηm 20.89 % Length 2,279 mmWidth 1,134 mmDepth 35 mmWeight 27.8 kg Datasheet Sharp High Performance NU-JC410 410w Solar Panel Installation Manual Sharp High Performance NU-JD540 410w Solar Panel Installation Manual

...Read more View Product

£111.00

NDS Energy Sun Control 2 12V 320W MPPT With N-Bus - SCE320

SUNCONTROL2 is the latest and most innovative charge regulator from NDS. The MPPT technology allows to optimize the energy from any solar panel, performing the most modern charging curves, for batteries always charged and efficient over time. Solid and functional thanks to the professional terminal block and equipped with updated communication protocols LIN-BUS / CI-BUS, SUNCONTROL2 is ideal for an installation destined to last over time. Available in two different versions: SC320M with input for two panels up to 320W (without cooling fan) and SC350M which supports up to 350W. The charge regulator is the heart of the photovoltaic system, choosing suncontrol2 means making the most of all the potential of today and the future Main Features: Temperature Sensor Latest Generation Lin-Bus/Ci-Bus Communication Protocols Professional Terminal Block Recharge Starting Battery 5-Stages Charging Curves Desulphation System LED Charging Status Separate Input for Panel Nominal Voltage 12V Nominal Voltage Input 30A Maximum Charging Current 20A Module Max Power 320W MPPT System Yes Protection Fuse 30A Bluetooth No Dimensions L151 x W90 x D48mm Warranty 2 Years

...Read more View Product

£268.00

NDS Energy Semi Flexible Solar Panel 12V 105W (Front Junction Box) - LSE105BF

NDS Energy Semi Flexible Solar Panel 12V 105W (Front Junction Box) - LSE105BF LIGHTSOLAR is the “Glass & Frameless” range of solar panels designed for applications where weight, thickness and resistance are fundamental characteristics. The cells of these monocrystalline panels, with an efficiency of 18.75%, are embedded in an exclusive multi-layer structure: the upper layer is a plastic polymer called ETFE highly resistant to corrosion and weathering, such that it can be defined as self-repairing. The surface of the panel, always exposed to scratches from tree branches, hail, sharp surfaces or other accidental shocks, is able to self-model, returning to the initial shape ideal for capturing sunlight. The lower layer of the structure is composed by an Alluminum sheet to contain and dissipate as much as possible the heat generated by the cells and to give the panel such strength that it is also perfect for nautical applications, where (with suitable and soft footwear) it is possible to step on the panel. Main Features: Structure - Built with 7 layers, including the ETFE surface, the best surface in terms of efficiency and durability, and an alluminum sheet that tightens it making it more robust and improving the dissipation of heat. Junction Box - The NDS aerodynamic box contains the supplied 3 meters connection cable and the bypass diodes required to reduce shading This special version of LightSolar has a completely flat surface, thanks to the use of a new connection method called Back Junction Box and laminated diodes included in the frame of the panel itself. The position of the connection cable, on the back, eliminates the Junction Box from the exposed surface of the panel. The round box, only 30mm in diameter, tightens the cable, making the connection solid and secure. This version is ideal for pop top roofs, minimizing space requirements, eliminating cable clutter, as well as unsightly and complex cable boxes. Nominal Voltage 12V Nominal Power 105W Number of Cells in Series 36 Dimensions L1068 x W503 x D4mm Weight 3.97Kg Warranty 2 Years

...Read more View Product

£268.99

NDS Energy Semi Flexible Solar Panel 12V 105W (Rear Junction Box) - LSE105BR

NDS Energy Semi Flexible Solar Panel 12V 105W (Rear Junction Box) - LSE105BR LIGHTSOLAR is the “Glass & Frameless” range of solar panels designed for applications where weight, thickness and resistance are fundamental characteristics. The cells of these monocrystalline panels, with an efficiency of 18.75%, are embedded in an exclusive multi-layer structure: the upper layer is a plastic polymer called ETFE highly resistant to corrosion and weathering, such that it can be defined as self-repairing. The surface of the panel, always exposed to scratches from tree branches, hail, sharp surfaces or other accidental shocks, is able to self-model, returning to the initial shape ideal for capturing sunlight. The lower layer of the structure is composed by an Alluminum sheet to contain and dissipate as much as possible the heat generated by the cells and to give the panel such strength that it is also perfect for nautical applications, where (with suitable and soft footwear) it is possible to step on the panel. Main Features: Structure - Built with 7 layers, including the ETFE surface, the best surface in terms of efficiency and durability, and an alluminum sheet that tightens it making it more robust and improving the dissipation of heat. Junction Box - The NDS aerodynamic box contains the supplied 3 meters connection cable and the bypass diodes required to reduce shading This special version of LightSolar has a completely flat surface, thanks to the use of a new connection method called Back Junction Box and laminated diodes included in the frame of the panel itself. The position of the connection cable, on the back, eliminates the Junction Box from the exposed surface of the panel. The round box, only 30mm in diameter, tightens the cable, making the connection solid and secure. This version is ideal for pop top roofs, minimizing space requirements, eliminating cable clutter, as well as unsightly and complex cable boxes. Nominal Voltage 12V Nominal Power 105W Number of Cells in Series 36 Dimensions L1253 x W673 x D4mm Weight 5.82Kg Warranty 2 Years

...Read more View Product

£749.00

TN Power Lithium 12.8V 100Ah Leisure Battery LiFePO4 with Bluetooth and Heater

100Ah Heated Lithium Leisure Battery Features Using the technology of lithium iron phosphate cell, superior safety Thousands of cycles, 100% DOD, under normal conditions Built-in automatic protection for over-charge, discharge and tempertature Built in heater maintaining battery at over 5 °C when charging Maintenance Free Internal cell balancing About 40% ~50% of the weight of a comparable lead acid battery. Can be charged using most standard lead-acid charges (set) Wider temperature range:-20OC ~60OC Support for Series application expansion (up to 51.2V) and two in parallel Application Recreational Vehicles Motorhomes Marine Renewable Energy Medical / Mobility Electric Vehicles Golf Cart Brand TN Power Manufacturer Part Number TN12.8-100(LT) Warranty 5 Years Country of Manufacture China Terminal Type M8 Weight 13.1Kg Dimensions L328 x W172 x H220mm Cycle Life >2000 Cycles @ 0.2C Charging/Discharging at 100%DOD,Until 70% Capacity Nominal Voltage 12.8V Energy 1075.2Wh 1280Wh Nominal Capacity 100Ah@0.2C Discharging Current 20A Max Continuous Current 100A Casing ABS Discharging Cut-off Voltage 10.0V Max Pulse Current 200A (<3S°C) Max Charging Current 50A Charging Current 20A Charging Voltage 14.6±0.2V Bluetooth Built-In Water Dust Resistance IP55

...Read more View Product

£268.99

Victron GX Touch 70 - BPP900455070

Victron GX Touch 70 (BPP900455070) Panels and system monitoring Victron GX Touch 70 is the display accessory for the Cerbo GX. The seven inch a touch screen display gives an instant overview of your system and allows to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, its super slim waterproof design, top-mountable setup and its simple installation bring a lot of flexibility when creating a crisp and clean dashboard. Simply mounted The GX Touch is optimised to more than meet the standards of installer professionals. The screen is simply bolted on top of a dashboard, eliminating the need to create perfect cut-outs and is connected through just one cable, taking away the hassle of having to bring many wires to a dashboard. The GX Touch 70 is a companion to the Cerbo GX, the all-new communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the GX Touch 70, a MFD or our VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. DIMENSIONS 113 × 176 × 13.5 mm BRAND Victron Energy COLOUR Black COUNTRY OF ORIGIN Malaysia GLOBAL IDENTIFIER (GTIN CODE) 8719076054344 INTRASTAT STATISTICAL CODE 85285900 MANUFACTURER Victron Energy QUANTITY PER MASTERBOX 18 QUANTITY PER PALLET 540 SIZE 113 x 176 x 13,5

...Read more View Product

£69.99

Parallel Connection Kit For Iconica 48V 4000W / 5000W Kms Or Zt Series Hybrid Pure Sine Wave Inverters

This parallel connection kit includes all of the parts required for connecting multiple identical 48V Iconica inverters together in parallel. Compatible models include:Iconica 48V KMS series hybrid inverters starting at 4000W - such as Iconica 4000W 48V KMS series inverters or Iconica 5000W 48V KMS series invertersIconica 48V Zero Transfer ZT series hybrid inverters - such as Iconica 5000W 48V ZT series invertersThe kit includes:1 x Circuit board1 x Communication cable1 x Current sharing cable A maximum of nine Iconica KMS or ZT series inverters can be connected together to increase the total system power handling capability. Once connected in parallel, the inverters can be set to either single phase or three phase operation mode, typically used for running industrial equipment.This parallel kit is suitable for linking identical Iconica 48V 4000W-5000W KMS series inverters OR Iconica 48V ZT series inverters in parallel. Please note this kit is not compatible with any other inverter from the Iconica range.Connection of additional inverters is very simple and full instructions can be found in the detailed user manual supplied with this parallel connection kit.Please note: One parallel connection kit is required per Iconica inverter. For example, if connecting two inverters together, two connection kits are required.Specifications:Compatible with identical 48V KMS series Iconica Hybrid inverters (4000W or 5000W) or Iconica 48V ZT series inverters 1 x circuit board1 x communication cable1 x current sharing cable

...Read more View Product

£123.95

Victron Energy Blue Smart IP65 Charger 12V 10A 1 Output UK – BPC121031024R

The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Benefits The battery is charged, smartly… to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Recovery of deeply-discharged ‘dead’ batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected. Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. Features Water, dust and chemical resistant Seven step smart charge algorithm Recovery of fully discharged ‘dead’ batteries Automatic power supply function Severe cold performance: down to -30°C Several other battery life enhancing features Low power mode to charge smaller batteries Li-ion battery mode Setup and configure, readout of voltage and current by Bluetooth Smart Brand Victron Energy Manufacturer Part Number BPC121031024R GTIN 8719076039754 Voltage 12V Charge Current 10A Input Voltage 230V Number of Outputs 1 Protection Category IP65 (splash and dust proof) Efficiency 94% Bluetooth Enabled Yes Plug Type UK Dimensions H60 x W105 x D190mm Weight 0.9Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£138.99

High Efficiency 40A Mppt Solar Charge Controller For Solar Panels Up To 520W (12V) / 1040W (24V) Up To 100V

MPPT Technology:This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined input solar power allowed for this controller is 520W for a 12V battery system or 1040W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full system protection:This charge controller features a comprehensive set of electronic protection functions to ensure the maximum possible efficiency of your solar system. These include: reverse current prevention at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, solar panel over voltage, over load, short circuit and reverse polarity protection. The controller also has self-diagnostic capability and highlights any system errors using advanced fault-targeting technology. Lithium Battery charging:This solar charge controller is compatible with lithium batteries when a lithium battery charging program is selected using PC software (see below for more details), and can also set the charging parameters for lithium batteries.Advanced system monitoring:The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel)Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energyEasy to use buttons allow the user to manually select the battery type (sealed, flooded or gel) and program load settings (e.g. set timers for lighting, fans, pumps etc).Current limiting function (40A) allows the possibility of adding more solar panels to your solar system in the future Multiple connectivity optionsThis model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only). If using the RJ45 to USB cable, the user also has the option to create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable).Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. (Inbuilt temperature sensor is not enabled for lithium batteries). Controller specifications: The most advanced MPPT technology to ensure high efficiency (>95%) of your solar system Fully automated operation and auto 12/24V selection for lead acid batteries 3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 520W (12V) / 1040W (24V) Temperature sensor for automatic compensation (-3mV/°C/2V) (auto temperature compensation not enabled for lithium batteries) Comprehensive electronic protection features Communication port: RS485/RJ45 interface Grounding: negative common ground Current limiting function (40A) Self-consumption: <12mA Working temperature: -25°C to +50°C Size: 25.2 x 18 x 6.3 cm Mounting dimensions: 21 x 17.1 cm Weight: 1.65kg Multiple mounting holes (5mm diameter) for ease of installation

...Read more View Product

£999.00

Sterling Power Pro Combi S Pure Sine Wave Inverter 12V 2500W – PCS122500

The new Pro Combi range is designed to be very competitive, no frills, high performance, and value for money products, presented in a simple, easy to install and use style.If you require power assist, parallel connection, three phase output functions or any other enhanced combi features then this range is not for you. If you’re not familiar with these things this ProCombi is perfect for you. Modern combis are getting more and more complex, with each company trying to out do the next with abilities beyond the understanding and requirements of most people. This detracts from the combi’s main strength of being easy to install and easy to use. There is, no doubt, a market for the advanced functions but the vast majority of combi users simply do not need them and never will. Most people simply require the unit to act as a high performance constant current battery charger when on mains power then cross over to act as an efficient inverter when on battery – and that’s it!The problem with enhanced functions is, even if they are not used, they eat up valuable power. The more functions on a product running (even though you do not use them) the higher the quiescent current on the inverter (the current the unit uses itself to operate). Complex combis at 12V can use as much as 9.5 A, whereas, Pro Combi can use as little as 2A. Also, a lot of the expensive combis do not even have a power save function which can drop the combi power consumption to as little as 0.2A when off load, some combis continue to consume 2A + even when there is no load.Sterling has reversed this trend with this Pro Combi range by stripping away the unnecessary features from a complex combi saving money. The end result is a simple, straight forward product that does what you think it should. Using our years of experience in this market we have tailored the product range to suit 90% of people purchasing Combis. Features 30 amp through current P.F.C. (power factor correction) Includes remote control with 10m cable. 4 step progressive charging 8 battery type selector Charger only select option (on S models only) Earth – neutral link when on inverter mode to comply with latest regulations Brand Sterling Power Manufacturer Part Number PCS122500 Voltage 12 Power (W) 2500 Warranty 2 Years

...Read more View Product

£820.00

Victron Energy MultiPlus-II 48V 5000VA 70A 50A GX – PMP482506000

An Inverter/Charger with device networking built-in, the MultiPlus-II GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation. Capable of parallel operation for increased power output, or battery charge-rates, the MultiPlus-II GX can also be configured for three-phase supply. A host of advanced features – such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power – can all be controlled straight from your phone or smart device. Remote monitoring is also possible. Features A MultiPlus-II with LCD and GX functionality The MultiPlus-II GX integrates a MultiPlus-II inverter/charger and a GX device with a 2 x 16 character display. Display and Wi-Fi The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device. GX device The integrated GX device includes: A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port. A USB port. A Ethernet port. A VE.Direct port. Applications The MultiPlus-II GX is intended for applications where additional interfacing with other products and/or remote monitoring is required, such as on-grid or off-grid energy storage systems and certain mobile applications. Parallel and three phase operation Only one GX unit is needed in case of Parallel and three phase operation. Brand Victron Energy Manufacturer Part Number PMP482506000 GTIN 8719076048824 Voltage 48V Cont. Output Power at 25°C 5000VA Peak Power 9000W Output AC Voltage 230V Transfer Switch 50A Max. AC Input Current 50A Max. Battery Charge Current 70A Protection Category IP22 Efficiency 96% Bluetooth Compatible Yes Dimensions H506 x W275 x D147mm Weight 26Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£41.40

Sterling 6 amp 6V and 12V Battery Charger

Portable micro processor controlled chargers 230V AC 50 Hz only Fully automatic microprocessor controlled Can be set at 2, 4 , 6 amps for 6V and 12V Batteries 2 Amp slow charge - for charging and maintaining small batteries 4 Amp medium charge - self-adjusting charge rate idea for everyday charging needs and keeping your battery in peak condition 6 Amp fast charge - charge monitor battery condition and adjusts charge rate downward to prevent battery damage Overheat protection, short circuit protection, reverse polarity protection, input low voltage and over voltage protection Suitable for use with lead-acid and AGM batteries Automatically switches to float charger and maintenance when battery is fully charged Battery rejuvenation pulse function inc. De-Sulphation protection LED Display Voltage DC Amps AC Plug Size L x W x D mm Weight Kg 6 & 12 6 British 180 x 100 x 55 0.72

...Read more View Product

£424.99

Stering 12v 1800w Inverter (Inc. Remote)

All Sterling inverters are continuously rated, with all the usual overload, over voltage and low voltage cut outs, all the inverters come with cable and 24 kt gold connectors, in order to prevent battery terminal corrosion. Available in 230V for UK and Europe and also 110V for building sites / off vehicle use or for equipment supplied on boats made in the USA (not suitable for washing machine / some bread makers). Thermostatically controlled fans Overload, overheat, short circuit protected Standby-current: Efficiency: 85%-95% Incl. battery cable (1m length) Weight: 4kg Socket Type: British / Euro Voltage DC: 12 Power (Continuous) Watts: 1800 Size L x W x D mm: 300 x 250 x 100 Instruction Manual PDF Product Information PDF

...Read more View Product

£174.99

Sterling Pro Split R 12V 120A 2 Out Split Isolator

The ProSplit R is an advanced split charge management device, developed specifically to deal with the complex nature of modern multi battery systems in boats and vehicles. For single or dual alternator inputs to two, three or four battery bank installations. Complex software with some 1000 lines of code analyses every perceivable condition to ensure charging priorities are managed as you want with specific focus on preserving charge in the engine starter battery. Each input & output terminal is independently monitored to establish status before deciding where charge will be delivered and to prevent discharge from one battery to another. Truly zero voltage drop is one key feature of the Pro Split R. Many alternative products claim to have no voltage loss but, under test, are proven not to be so - especially with heavy loads - when it really matters. It may not seem significant but 1V drop equates to as much as 30% lost charging power in a 12V system. ? Unlike conventional Voltage Sensitive Relays (VSRs), the ProSplit R has the ability to identify and reverse current or over-voltage conditions and disconnect individual batteries to avoid damage or discharge. The ignition sense connection also ensures that the device knows the engine is running and protects the start battery when the engine is off ? Specification: Alt Volts: 12 Max Alt Amps: 12 Output Battery Bank: 2 out Unit Size (mm): 150 x 80 x 120 Unit Weight: 0.6 For cable information for all Sterling Products click here

...Read more View Product

Full Power System Kits

Shop By Application

Electrical Components

Power Banks

Victron Energy

Usage Styles

shop by application

shop electrical parts

Shop Power Banks

Shop Victron Energy

solar Panel Kits by size (w)

Solar Panel Kits by Vehicle

Solar Panel Kits by Price (£)

all solar panel kit categories

Solar Panels

solar panel cables & accessories

shop solar panel kits by size (W)

shop solar panel kits by vehicle

shop solar panel kits by price

shop all solar panel kit categories

shop solar panels by size (W)

shop solar panels by type

shop solar panel cables & accessories

Batteries

Battery Chargers

DC to DC charging

Battery & charging Accessories

Inverters

Victron Electrics

shop by battery type

shop by brand

shop by type

shop by kit

shop by type

shop by type

shop by BRAND

shop VICTRON ELECTRICS

WATER & PLUMBING

diesel heaters

Fridges & Freezers

cooking

ventilation & sky lights

Motorhomes

Motorhome Brands Power Upgrades

Full Power System Kits

Usage Styles

Shop By Application

shop by application

Electrical Components

shop electrical parts

Power Banks

Shop Power Banks

Victron Energy

Shop Victron Energy

solar Panel Kits by size (w)

shop solar panel kits by size (W)

Solar Panel Kits by Vehicle

shop solar panel kits by vehicle

Solar Panel Kits by Price (£)

shop solar panel kits by price

all solar panel kit categories

shop all solar panel kit categories

Solar Panels

shop solar panels by size (W)

shop solar panels by type

solar panel cables & accessories

shop solar panel cables & accessories

Batteries

shop by battery type

shop by brand

Battery Chargers

shop by type

DC to DC charging

shop by kit

Battery & charging Accessories

shop by type

Inverters

shop by type

shop by BRAND

Victron Electrics