Solar Equipment

£121.99

Victron Monocrystalline panel 175W-12V Mono 1485x668x30mm series 4a SPM041751200

This panel has now been superseded and upgraded to the Victron 185w Solar Panel Victron Energy Solar Panel 12V 175W Mono series 4a – SPM041751200 Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. This panel is available as part of our 175w Solar Kit and our 350w Solar Kit Brand Victron Energy Manufacturer Part Number SPM041751200 GTIN 8719076040361 Voltage 12V Nominal Power 175W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Dimensions L1485 x W668 x D30mm Weight 11Kg Warranty 5 Years This panel is available as part of our 175w Solar Kit and our 350w Solar Kit Datasheet BlueSolar Monocrystalline Datasheet Manual BlueSolar 175w Installation Manual

£59.90

Victron Energy SmartSolar MPPT 75/15 – Solar Charge Controller -SCC075015060R

Victron SmartSolar MPPT 75/15 - SCC075015060R Van Junkies recommend using the Victron SmartSolar MPPT 75/15 with solar panels up to 200w (12v) and 400w (24v) This Victron 75/15 SmartSolar (75V 15A) MPPT solar charge controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent BatteryLife function.Ultrafast MPPT Technology:The Victron 75/15 smartsolar MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high-speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high-intensity LED indicators. Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below). Features of the Victron SmartSolar MPPT 75/15 Inbuilt Bluetooth:This 75/15 SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth-enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle is required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.The Victron 75/15 smartsolar solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Victron 75/15 Smartsolar Datasheet Victron 75/15 Smartsolar Datasheet

...Read more View Product

£467.99

Victron 380W Monocrystalline Solar kit with SmartSolar 100/30 MPPT, Cables & MC4

380W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats (2 x 185w Panels) This 370w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. Panel sizes are 1485x668x30mm • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m red & black extension leads Full Kit with Victron 2 * 190W Monocrystalline panels, 2 * mount sets (optional), Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/30 MPPT charge controller, 5m of Black PV Cable (x2) & MC4 Connectors.1 x Ressetable Circuit Breaker1 x MPPT to Battery cable set with in-line fuse Mounts available (optional): 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets This highly efficient Victron solar 380w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Solar Panel Specifications Watts 190 Maximum Power Voltage - Vmpp(V) 19.68 Maximum Power Current - Impp(A) 9.41 Open Circuit Voltage - Voc(V) 24.11 Short Circuit Current - Isc (A) 9.91 Height (mm) 1485 Width (mm) 668 Thickness (mm) 30 Weight (KG) 11 Cell Type Mono Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability. Wiring guide for Solar Panel Kits in Series

...Read more View Product

£104.99

Victron Energy SmartSolar MPPT 100/30 – Solar Charge Controller - SCC110030210

Victron Energy SmartSolar MPPT 100/30 – Solar Charge Controller - SCC110030210 This Victron 100V 30A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device.Ultrafast MPPT Technology:This 30A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse current, PV reverse polarity and battery reverse polarity. The internal temperature sensor also protects the battery from overheating and will activate power derating if excessive temperatures are detected. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery, as well as 30 day performance data. The user can also specifically set the duration and voltage of each charging stage. Other features:The Victron SmartSolar MPPT 100/30 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Inbuilt bluetooth- Max solar panel voltage: 100V- Max solar panel power: 440W (12V) / 880W (24V)- Temperature sensor for automatic compensation (-16mV °C resp. -32mV °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 10mA- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 186 x 130 x 70 mm- Mounting dimensions: 175 x 75 mm- Weight: 1.3kg- 4 x mounting holes for ease of installation

...Read more View Product

£44.99

6 Piece ABS Solar Panel Mounting Brackets (Black or White) with Side Bracket for RV, Boats, Motorhome

Ideal for bonding to the roof - no need for drilling Available in Black or White Great for motorhomes, campervans, caravans, lorries, buses or other flat surfaces Suitable for a range of rigid-framed solar panels ABS material ensure long service life. No discoloration for a long period of time 4pcs Corner (15x15x6.5cm), 2pcs Sides (17.5x8.5x60cm) Check out the following video for installation tips:

...Read more View Product

£408.99

Victron 260W Mono Solar panel kit with SmartSolar 20A MPPT, Mounts, Cables & MC4

260W Victron Energy Van Solar Panel Kit (2 * 130w Panels) Perfect for Campervans, Motorhomes & Caravans Panel sizes are 1020x668x30mm This 260w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m red & black extension leads Full Kit with Victron 2 * 130W Monocrystalline panels, 8 x Z Brackets or plastic corner fixing brackets, Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/20 MPPT charge controller, 10m of PV Cable & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cable with In-Line Fuse. This highly efficient Victron solar 260w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Wiring guide for Solar Panel Kits in Series Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£88.99

Victron Energy SmartSolar MPPT 100/20 – SCC110020160R

Victron Energy SmartSolar MPPT 100/20 – SCC110020160R A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on our website for details Day/night timing and light dimming option See the software section on Victron for details Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. Brand Victron Energy Manufacturer Part Number SCC110020160R GTIN 8719076043027 Voltage 12/24/48V Rated Charge Current 20A Nominal PV Power, 12V 290W Max. PV Short Circuit Current 20A Max. PV Open Circuit Voltage 100V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H100 x W113 x D60mm Weight 0.65Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£1.99

Solar Photovoltaic Cable 6mm (Black PV Cable)

6mm² Solar Cable PV1-F (Priced Per Metre)LS0H - Low Smoke Zero Halogen Conductor: class 5, flexible tinned copper wire Insulation: TPE cross-linked halogen free (LS0H) Outer sheath: TPE cross-linked halogen free (LS0H) Colour: Black LS0H = Low Smoke Zero Halogen Resistance to Fire: Flame propagation acc. to EN 60332-1-2 (Single Cable Flame Test) Tested according to CPR: EN 50399 Common test methods for cables under fire conditions Heat release and smoke production measurement on cables during flame spread test, UNI EN 13501-6 Flammability class: Dca Smoke emission class: s2 Drip particle class: d2 Resistance to cold: EN 50618, Table 2: Cold Bending Test at -40°C acc. to EN 60811-504; Cold Elongation Test at -40°C acc. to EN 60811-505; Cold Impact Test at -40°C acc. to EN 50618 Annex C and EN 60811-506. Damp-Heat Test Acc. to EN 50618, Table 2 (test acc. to EN 60068-2-78) : 90°C for 1.000h and min. 85% humidity Flame propagation: EN 60332-1-2 Corrosive gases: acc. to EN 50525-1 Annex B (EN 50267-2-1, EN 50267-2-2, IEC 60754-1, IEC 60754-2) Resistance to UV: to EN ISO 4892-1 and 4892-3 (Method A) Resistance to ozone: EN 60811-403 Test Method A, EN 50396 clause 8.1.3 Test Method B Lifetime: The cables are designed to operate at a normal max conductor temperature of 90°C, but for a maximum of 20.000 hours a max. conductor temperature of 120 °C at a max. ambient temperature of 90 °C is permitted. (test according to EN 60216-1 and EN 60216-2)

...Read more View Product

£290.99

Victron 190W Monocrystalline Solar panel kit with SmartSolar MPPT, Cables & MC4

190W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats Panel sizes are 1485x668x30mm This 190w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron Smartsolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit with Victron 190W Monocrystalline panel, optional plastic or aluminium mounting brackets, Cable entry Gland, Victron 75/15 Smartsolar MPPT charge controller, 10m of Black PV Cable (2 x 5m) & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cables with In-Line Fuse. Mounts Optional: 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets Ideal for charging battery banks up to 250ah This highly efficient Victron solar 190w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Solar Panel Specifications Watts 190 Maximum Power Voltage - Vmpp(V) 19.68 Maximum Power Current - Impp(A) 9.41 Open Circuit Voltage - Voc(V) 24.11 Short Circuit Current - Isc (A) 9.91 Height (mm) 1485 Width (mm) 668 Thickness (mm) 30 Weight (KG) 11 Cell Type Mono Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£39.49

Pair Of 10M Single Core Extension Cable Leads 6.0mm For Solar Panels And Solar Charging Kits

Pair Of 10 Metre Single Core Extension Cable Leads 6.0mm For Solar Panels And Solar Charging Kits This pair of single core solar extension cables is specially designed for solar panels to carry high current and have negligible power loss. It comes with waterproof MC4 connectors ("male" on one lead, "female" on the other lead) which can be easily connected to similar MC4-type connectors coming with most solar panels, including Photonic Universe solar panels. This cable is suitable for all weather conditions including cold and hot temperatures.

...Read more View Product

£339.98

110Ah Leisure Battery, 185W Solar Panel Kit with Charge Controller, Cable and Brackets

Package consists of 1x XV110, 1x SCC075015060R, 1x SPM041851200, 1x SCA000500000 & 1x RNG-MTS-ZB & 1 x Roof GlandTitanium XV110 Leisure BatteryThis heavy duty deep cycle battery is designed to meet the needs of leisure and marine vehicles. With its sealed calcium construction which makes it 100% maintenance free this battery is fast becoming a favourite within the industry.This range is suited to seasonal use such as Caravans Motorhomes Boats RV Camping and much more.The product is supplied charged and ready to fit.Features• Excellent design handle – Easy battery replacement• Integrated computer designed and reinforced container – Protection from vibrations and impact• Sealed covers – Prevents acid leaks and minimizes gassing• Totally sealed and spill proof• Maintenance Free – no topping up required• Glass fibre separators• Safety venting system• Sealed water recombination system• Tough polypropylene case designVictron Energy SmartSolar MPPT 75/15A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.MPPT: Ultra Fast Maximum Power Point TrackingBy constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.Bluetooth Smart built-inThe wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.VE.DirectFor a wired data connection to a Color Control GX, other GX products, PC or other devicesBattery Life: intelligent battery managementWhen a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.Internal temperature sensorCompensates absorption and float charge voltage for temperature.Victron Energy Mono Solar Panel 12V 185W• Low voltage-temperature coefficient enhances high-temperature operation.• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.• 25-Year limited warranty on power output and performance.• 5-Year limited warranty on materials and workmanship.• Sealed, waterproof, multi-functional junction box gives high level of safety.• High performance bypass diodes minimize the power drop caused by shade.• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.• A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.• Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.• High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Solar Panel Mounting Z Bracket – Set of 4 The Z-Bracket Mount System is designed to support the installation of single solar panel units; generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as an attachment to a user-made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy; affordable and quick. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£596.99

200w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15

200w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4) Panel junction box is located underneath the panel This 200w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 200w Semi-Flexible Durable Black Solar Panel 1390 x 710 x 3mm Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m) 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 3 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar Panel Specifications: Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 3.65kg) and very thin (just 3mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Junction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting. Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. Simple, professional installation: This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface. This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Solar panel specifications: Peak power: 200W Maximum power voltage: 17.6V Maximum power current: 11.36A Open circuit voltage: 20.4V Short circuit current: 12.05A Dimensions: 1390 x 710 x 2 mm Weight: 3.50 kg MPPT Specifications The Victron 75V 15A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£24.49

Pair Of 5M Single Core Extension Cable Leads 4.0Mm For Solar Panels And Solar Charging Kits

Pair Of 5 Metre Single Core Extension Cable Leads 4.0Mm For Solar Panels And Solar Charging Kits This pair of single core solar extension cables is specially designed for solar panels to carry high current and have negligible power loss. It comes with waterproof MC4 connectors ("male" on one lead, "female" on the other lead) which can be easily connected to similar MC4-type connectors coming with most solar panels, including Photonic Universe solar panels. This cable is suitable for all weather conditions including cold and hot temperatures.

...Read more View Product

Victron 230W Mono Solar panel kit with SmartSolar 20A MPPT, Mounts, Cables & MC4

230W Victron Energy Van Solar Panel Kit (2 * 115w Panels) Perfect for Campervans, Motorhomes & Caravans Panel sizes are 1015x668x30mm This 230w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m red & black extension leads Full Kit with Victron 2 * 115W Monocrystalline panels, 8 x Z Brackets or plastic corner fixing brackets, Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/20 MPPT charge controller, 10m of PV Cable & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cable with In-Line Fuse. This highly efficient Victron solar 230w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Wiring guide for Solar Panel Kits in Series Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

Victron Monocrystalline panel 190W-12V Mono 1485x668x30mm series 4a SPM041903903

Victron Energy Solar Panel 12V 190W Mono series 4a – SPM041851200 Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. This panel is available as part of our 190w Solar Kit and our 380w Solar Kit Brand Victron Energy Manufacturer Part Number SPM041903903 GTIN 8719076040361 Voltage 12V Nominal Power 190W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Dimensions L1485 x W668 x D30mm Weight 11Kg Warranty 5 Years Datasheet BlueSolar Monocrystalline Datasheet Manual BlueSolar 185w Installation Manual

...Read more View Product

£99.99

Victron Monocrystalline panel 115W-12V Mono series 4b SPM041151202 (previously SPM041151200)

Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. This panel is available as part of our 115w Solar Kit and our 230w Solar Kit Brand Victron Energy Manufacturer Part Number SPM041151202 (previously SPM041151200) GTIN 8719076047414 Voltage 12V Nominal Power 115W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Dimensions 1030 x 668 x 30mm Weight 8Kg This panel is available as part of our 115w Solar Kit and our 230w Solar Kit

£55.99

Victron Energy SmartSolar MPPT 75V 10A – 75/10 SCC075010060R

Victron Energy SmartSolar MPPT 75V 10A – 75/10 SCC075010060R A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on our website for details Day/night timing and light dimming option See the software section on Victron for details Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. Brand Victron Energy Manufacturer Part Number SCC075010060R GTIN 8719076040798 Voltage 12/24V Rated Charge Current 10A Nominal PV Power, 12V 145W Max. PV Short Circuit Current 13A Max. PV Open Circuit Voltage 75V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H100 x W113 x D40mm Weight 0.5Kg Warranty 5 Years

...Read more View Product

£621.99

Victron 570W Monocrystalline Solar kit with SmartSolar 150/35 MPPT, Cables & MC4s

570W Victron Energy Mono Solar Panel Kit - Perfect for Campervans, Motorhomes & Boats Panel sizes are 1485x668x30mm This 570w Large Solar Panel Kit is designed for off-grid, campervans, motorhomes, and yachts/boats. The included Victron SmartSolar MPPT 150/35 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes, and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit with Victron 3 * 190W Monocrystalline panels, 3 * mount sets (optional) , Cable entry Gland, Victron SmartSolar Bluetooth enabled 150/35 MPPT charge controller, 5m of Black PV Extension Cable s(x2) with MC4 Connectors, 1 x Resettable Circuit Breaker, 1 x MPPT to Battery Cable set with in-line fuse. Mounts available (optional): 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets This highly efficient Victron solar 570w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds, and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Wiring guide for Solar Panel Kits in Series

...Read more View Product

£299.99

110Ah Leisure Battery, 115W Solar Panel Kit with Charge Controller, Cable and Brackets

Package consists of 1x XV110 (Titanium), 1x SCC075010060R, 1x SPM041151202, 1x Z Bracket & 1 x 5QM40 & 1 x Roof Gland Titanium XV110 Dual Purpose Leisure Battery This heavy duty deep cycle battery is designed to meet the needs of leisure and marine vehicles. With its sealed calcium construction which makes it 100% maintenance free this battery is fast becoming a favourite within the industry. This range is suited to seasonal use such as Caravans Motorhomes Boats RV Camping and much more. The product is supplied charged and ready to fit. Features Excellent design handle – Easy battery replacement Integrated computer designed and reinforced container – Protection from vibrations and impact Sealed covers – Prevents acid leaks and minimizes gassing Totally sealed and spill proof Maintenance Free – no topping up required Glass fibre separators Safety venting system Sealed water recombination system Tough polypropylene case design Victron Energy SmartSolar MPPT 75/10 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on our website for details Day/night timing and light dimming option See the software section on Victron for details Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. Victron Energy Solar Panel 12V 115W Mono series 4a Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Victron Energy Solarcable L=5m/4sqmm MC4-M/F 5m/4spmm MC4-M/F of Solarcable Z Bracket Mounting Aluminium Fixing Set These brackets are made from 2mm aluminium Included: 4x Z-Shape Tabbed Solar Panel Brackets 8x Stainless Steel Self Tapping Screws 4x Stainless Steel Spring Washers 4x Stainless Steel Short Bolts 4x Stainless Steel Washers 4x Stainless Steel Nuts Brand Titanium & Victron Energy Manufacturer Part Number XV110 (Titanium), SCC075010060R, SPM041151202, SCA000500000 and Z Bracket Battery Voltage 12V Battery Capacity (C20) 110Ah Battery Cold Cranking 800CCA Terminal Type A, Standard Automotive Terminal Layout Right Hand Positive Battery Dimensions (Including Terminals) L354 x W174 x H190mm Battery Weight 23.8Kg Battery Warranty 4 Years Battery Technology Sealed Calcium Battery Application Deep Cycle MPPT Voltage 12/24V Rated Charge Current 10A Nominal PV Power, 12V 145W Max. PV Short Circuit Current 15A Max. PV Open Circuit Voltage 75V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes MPPT Dimensions H100 x W113 x D40mm MPPT Weight 0.5Kg MPPT Warranty 5 Years MPPT Country of Manufacture India Solar Panel Voltage 12V Nominal Power 115W Cell Type Monocrystalline Maximum System Voltage 1000V Solar Panel Dimensions L1015 x W668 x D30mm Solar Panel Weight 8Kg Solar Panel Warranty 5 Years Solar Panel Country of Manufacture China Cable Length 5m Cable Thickness 4sqmm Cable Country of Manufacture China Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£164.99

Victron Energy SmartSolar MPPT 100/50 – Solar Charge Controller SCC110050210

Victron Energy SmartSolar MPPT 100/50 – Solar Charge Controller SCC110050210 50A MPPT with max VOC 100V, 12 or 24 Volt battery A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. MPPT: Ultra Fast Maximum Power Point TrackingBy constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remote Monitoring and ControlRemotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

...Read more View Product

£57.00

Victron Energy BlueSolar MPPT 75/15 – SCC010015050R

Victron Energy BlueSolar MPPT 75/15 – SCC010015050R This Victron 75V 15A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery), battery state of charge, load status and consumption.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 75-15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries (requires Bluetooth dongle or USB interface cable to adjust battery type).

...Read more View Product

£605.99

250W MCS certified black semi-flexible solar panel kit

250w MCS Certified Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/20 (5-year panel warranty) This 250w Flexible Durable MCS Certified Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and efficient charging of your battery. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 250w Flexible Durable Solar Panel with MCS Certification Dimensions: 1756 x 770 x 3.4 mm Victron Energy SmartSolar MPPT 100/20 Sikaflex 522 Caravan / Motorhome Adhesive 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 5 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar panel specifications: Peak power: 250W Maximum power voltage: 20.23V Maximum power current: 12.37A Open circuit voltage: 24.85V Short circuit current: 13.34A Protection: IP68 Dimensions: 1756 x 770 x 3.4 mm Weight: 5.6 kg 2 x 0.3m of 4.0m² solar cable attached The FMCSB-250M is a state-of-the-art 250W MCS-certified semi-flexible monocrystalline solar panel that combines high performance with a sleek, all-black aesthetic. Engineered with 182mm silicon wafers, PERC technology, and half-cut cells, this panel delivers exceptional power output while minimising energy losses. Designed for curved rooftops, weak load-bearing surfaces, and corrugated metal roofs, the FMCSB-250M is ideal for residential, commercial, and industrial solar applications where both efficiency and aesthetics matter.

...Read more View Product

200W Black Semi-Flexible Solar Panel - Round Rear Junction Box -5M Cable - Durable Etfe Coating

200W Black Semi-Flexible Solar Panel - Round Rear Junction Box -5M Cable - Durable Etfe Coating We love high-quality solar products. That's why we have developed this highly durable black semi-flexible solar panel reinforced with anodised aluminium and a strong ETFE surface and made from German monocrystalline solar cells. This model also features a rear-fitted circular junction box and 5m dual-core cable. This high efficiency 200W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and backup solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. DIMENSIONS: 1410 x 710 x 3mm3 Year WarrantyStrong ETFE coating:The surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality 5-busbar solar cells:The high-efficiency monocrystalline solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting solar cells will provide many years of consistent, free power.Simple, professional installation:This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface.This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.Other benefits:Semi-flexible design makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 3.85kg) which is great for all vehiclesSealed waterproof design ensures the panel can be used in all weather conditionsJunction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting.Fitted with a single length of high quality 5m dual core cable for easy installation and wiring Solar panel specifications: Electrical Characteristics Type Monocrystalline (A Grade, 158.75mm, High efficiency) Peak Power (Pmax) 200Wp Power tolerance range (%) ±3% Open circuit voltage / Voc (V) 20.8V Max. power voltage / Vmp (V) 17.6A Short circuit current / Isc (A) 12.27A Max power current / Imp (A) 11.37A Maximum System Voltage (V) 200V DC Above Specification at standard test conditions(STC):1000W/㎡, cell temperature 25°C, AM1.5 Panel Info Part number SPF200R Power 200Wp Cable type 2.5mm twin core Red / Black (UV stable) Cable length 5m Frame Material N/A Face material ETFE Dimensions (mm) 1410 x 710 x 3mm Performance UK weather (weather dependant) Average expected winter 9.01Ah (160Wh) per day (0.8h) Average expected Summer 68.2Ah (1200Wh) per day (6h) Warranty Performance (of cells 20 years (at 80% of day 1 performance) Product construction 3 Years

100W Monocrystalline Solar Panel With 5M Cable

This waterproof, affordable, high efficiency Photonic Universe 100W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity to charge a 12V battery to power hundreds of devices and electrical appliances.The long-lasting monocrystalline solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system or 4mm extension cable. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller.Each individual solar panel is thoroughly tested to the highest quality standards, and labelled with a unique serial number for further quality control and increased warranty protection.Several of these panels may be connected in parallel or series to generate extra power for your needs.If you are planning to use this solar panel to charge a 12V battery or battery bank: please note this panel requires a solar charge controller / regulator to charge a 12V battery. To view the full range of solar charge controllers we offer, please visit the Solar Charge Controllers category of our online shop.Solar panel specifications:Peak power: 100WMaximum power voltage: 19.3VMaximum power current: 5.18AOpen circuit voltage: 22.9VShort circuit current: 5.56APower allowance range: 0~+3%Dimensions: 1200 x 540 x 35 mmWeight: 8.5 kg4 mounting holes2 x 5m of high quality single core solar cable (4.0mm² cross section) with MC4 connectors attached This product is covered by a 1 year workmanship warranty

£518.99

Victron 390W Monocrystalline Solar kit with SmartSolar 100/30 MPPT, Cables & MC4s

390W Victron Energy Mono Solar Panel Kit - Perfect for Campervans, Motorhomes & Boats Panel sizes are 1020x668x30mm This 390w Large Solar Panel Kit is designed for off-grid, campervans, motorhomes, and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes, and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit with Victron 3 * 130W Monocrystalline panels, 3 * fixing brackets (optional) , Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/30 MPPT charge controller, 5m of Black PV Extension Cable s(x2) with MC4 Connectors, 1 x Resettable Circuit Breaker, 1 x MPPT to Battery Cable set with in-line fuse. Mounts available (optional): 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets This highly efficient Victron solar 390w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds, and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Wiring guide for Solar Panel Kits in Series

...Read more View Product

£149.00

Victron Energy BlueSolar MPPT 100/50 – SCC020050200

Victron Energy BlueSolar MPPT 100/50 – SCC020050200 This Victron 100V 50A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 50A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 100-50 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12/24V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Max solar panel voltage: 100V- Max solar panel power: 700W (12V) / 1400W (24V)- Temperature sensor for automatic compensation (-16mV / °C resp. -32mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 30mA (12V) / 20mA (24V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 130 x 186 x 70 mm- Mounting dimensions: 176 x 71.5 mm- Weight: 1.3kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£143.50

Victron Polycrystalline panel 175W-12V Poly 1485x668x30mm series 4a SPP041751200

Victron Energy Solar Panel 12V 175W Poly series 4a – SPP041751200 Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Brand Victron Energy Manufacturer Part Number SPP041751200 GTIN 8719076040545 Voltage 12V Nominal Power 175W Cell Type Polycrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Dimensions L1485 x W668 x D30mm Weight 12Kg Warranty 5 Years

£22.49

Pair Of 3M Single Core Extension Cable Leads 6.0Mm For Solar Panels And Solar Charging Kits

Pair Of 3 Metre Single Core Extension Cable Leads 6.0Mm For Solar Panels And Solar Charging Kits This pair of single core solar extension cables is specially designed for solar panels to carry high current and have negligible power loss. It comes with waterproof MC4 connectors ("male" on one lead, "female" on the other lead) which can be easily connected to similar MC4-type connectors coming with most solar panels, including Photonic Universe solar panels. This cable is suitable for all weather conditions including cold and hot temperatures.

...Read more View Product

£549.98

250w Large Solar Panel Kit with Victron Smartsolar MPPT

250w Large Solar Panel Kit with Victron Smartsolar MPPT - Perfect for Campervans, Caravans & Motorhomes 250w Solar panel kit including:Monocrystalline Panel - Dimensions: 1630 x 770 x 35mmVictron 100/20 Smartsolar MPPT Solar Charge Controller2 x black 5m 6mm PV Solar Cable with MC4 Connectors4 x Z Bracket Mounts or 7 Piece ABS Plastic Solar Panel Mount Kit with Double Entry Roof Gland 1 x Resettable Circuit Breaker 1 x MPPT to Battery set of Cables with In-Line Fuse. This panel has bifacial solar technology to capture sunlight on both the front and rear surfaces, significantly increasing energy output by harnessing reflected light from the roof. This high efficiency, waterproof 250W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller. The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. Solar panel specifications: Peak power: 250W Maximum power voltage: 39.02V Maximum power current: 6.41A Open circuit voltage: 45.45V Short circuit current: 6.82A Power allowance range: +/- 3% Dimensions: 1630 x 770 x 35mm Weight: 13.5 kg 4 mounting holes 2 x 60cm of high quality single core solar cable 4.0mm cross section Male and female MC4 connectors Features of the Victron SmartSolar MPPT 100/20:• Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetoothenabled device• Ultra-fast Maximum Power Point Tracking (MPPT)• Advanced Maximum Power Point Detection in case of partial shading conditions• Load output on the small models• Battery Life: intelligent battery management by load shedding• Automatic battery voltage recognition• Flexible charge algorithm• Over-temperature protection and power de-rating when temperature is high.Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Advantages of SolarSolar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road.One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby.Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run.Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan.In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road.Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£108.99

Victron Energy BlueSolar MPPT 100/30 – SCC020030200

Victron Energy BlueSolar MPPT 100/30 – SCC020030200 This Victron 100V 30A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 30A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 100-30 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12/24V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Max solar panel voltage: 100V- Max solar panel power: 440W (12V) / 880W (24V)- Temperature sensor for automatic compensation (-16mV / °C resp. -32mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 30mA (12V) / 20mA (24V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 130 x 186 x 70 mm- Mounting dimensions: 176 x 71.5 mm- Weight: 1.3kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£112.99

Victron 130W Bluesolar Panel Mono Dimensions 1020mm x 668mm

Victron Bluesolar Panel Mono 130W Dimensions 1020 x 668 x 30mm Low voltage-temperature coefficient enhances high-temperature operation Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Rated Power: 130W Rated Voltage: 12V Impp: 6.98A Dimensions: 1020 x 668 x 30mm Weight: 8kg

...Read more View Product

£729.99

170w Narrow Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15

170w Narrow Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4) Highly efficient Black German Cells This 170w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 170w Narrow Semi-Flexible Durable Black Solar Panel 1917 x 548 x 2 mm Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) 5 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar Panel Specifications: This high-efficiency, waterproof 170W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners and even zipping. Product features: Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Unique narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 55cm wide) Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Incredibly light (only 3.7kg) and very thin (just 2mm) which is great for motorhome and caravan roofs High resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications 100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified. The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter). The fibreglass plastic used in this solar panel is very strong and durable. Soft and sealed edges of the solar panel make it resilient to mechanical impact on the sides and help avoid long term delamination. Solar panel specifications: Peak power: 170W Maximum power voltage: 18.7V Maximum power current: 9A Open circuit voltage: 22.8V Short circuit current: 9.5A Dimensions: 1917 x 548 x 2 mm Weight: 3.7 kg MPPT Specifications The Victron 75V 15A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£105.99

Victron Energy Solar Panel 12V 140W Mono Series 4a - SPM041401200

Victron Energy Solar Panel 140W 12V Mono 1250x668x30mm series 4a - SPM041401200 Exceptional Quality Solar Panel from Victron Energy, These panels are ideal for use on a number of applications, including campervans, Marine and Leisure vehicles. these work at their optimum level of performance when coupled with a Victron MPPT Solar Charge Controller. Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. This panel is available as part of our 140w Solar Kit and our 280w Solar Kit Brand Victron Energy Manufacturer Part Number SPM041401200 GTIN 8719076055808 Voltage 12V Nominal Power 140W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Dimensions L1250 x W668 x D30mm Weight 9Kg This panel is available as part of our 140w Solar Kit and our 280w Solar Kit

£289.99

200w Large Solar Panel Kit with Victron Smartsolar MPPT

200w Large Solar Panel Kit with Victron Smartsolar MPPT - Perfect for Campervans, Caravans & Motorhomes 200w Solar panel kit includes:Monocrystalline Panel - Dimensions: 1038mm x 992mmVictron 75/15 Smartsolar MPPT Solar Charge Controller2 x black 5m 6mm PV Solar Cable with MC4 ConnectorsOPTIONAL - 7 Piece ABS Plastic Solar Panel Mount Kit OR Z Bracket mounts with Double Entry Roof GlandResettable Circuit BreakerMppt to Battery Cables with In-Line Fuse This 200w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. This high efficiency, waterproof 200W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps). The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller. The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. Solar panel specifications: Peak power: 200W Maximum power voltage: 17.49V Maximum power current: 11.44A Open circuit voltage: 21.12V Short circuit current: 12.24A Power allowance range: +/- 3% Dimensions: 1038 x 992 x 30mm Weight: 10.5 kg 8 mounting holes 2 x 90cm of high quality single core solar cable (4.0mm cross section) Male and female MC4 connectors Features of the Victron SmartSolar MPPT 75/15:• Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetoothenabled device• Ultra-fast Maximum Power Point Tracking (MPPT)• Advanced Maximum Power Point Detection in case of partial shading conditions• Load output on the small models• Battery Life: intelligent battery management by load shedding• Automatic battery voltage recognition• Flexible charge algorithm• Over-temperature protection and power de-rating when temperature is high.Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£119.99

SUNPOWER 12v 50w Monocrystalline Semi Flexible Solar Panel SPR-E-Flex-50

SUNPOWER 12v 50w Monocrystalline Semi Flexible Panel Ideal for the Marine Environment: Easy and Low Cost Installation: You can install the Sunpower panels with adhesives and/or use of stainless steel grommets in the panel. The panels have standard quick-connect cables. An easy-to-follow installation guide is also provided with each panel. Warranty: 5 years limited power warranty of 80% of the minimum specified power rating. Designed in the USA and assembled in France. SunPower® flexible panels are lightweight and portable, so you can take them on your next adventure. Plus, The Sunpower panels feature the highest-efficiency solar cells available which as a result means more power or faster charging times for solar-compatible batteries. Designed for ToughnessThe SunPower Maxeon® Solar Cell is the only cell built on a solid copper foundation. As a result SunPower cells are resistant to power loss via cracking and corrosion, unlike conventional cells, which are much more likely to lose power when bent or subjected to a moist environment. SunPower flexible panels are the #1 choice for customers due to the combination of high power and cell ruggedness. Made with SunPower’s highest-efficiency Maxeon® solar cells, The SUNPOWER 12v 50w Monocrystalline Semi Flexible Panel delivers the most power and highest charging capacity in its product class. Sunpower manufactures their panels using a top-grade, lightweight polymer material, allowing for easy transport, installation, and flexibility up to 30 degrees. They come with MC4 male and female connectors that can connect easily to solar-compatible devices. Dimensions - 653 × 556 × 20 mm

...Read more View Product

£15.79

5M Single Core Extension Cable (4.0Mm) With Mc4 Connectors

This is a single core solar extension cable 4.0mm cross section which is specially designed for solar panels to carry high current and have negligible power loss. It comes with waterproof MC4 connectors ("male" on one end, "female" on the other) which can be easily connected to similar MC4-type connectors coming with most solar panels, including Photonic Universe solar panels. This cable is suitable for all weather conditions including cold and hot temperatures.

...Read more View Product

£288.99

300W Monocrystalline Large Solar Panel With 1M Cable

This high efficiency 300W monocrystalline solar panel is one of the largest solar panels available on the market. It is perfect for permanent outdoor use to provide free electricity in any grid-tie, hybrid or off-grid application (such as charging batteries in vehicles or boats, or powering an off-grid house or cabin, or working with a grid-tie / hybrid inverter to feed energy into the electrical grid). Due to the size of the area that this solar panel covers it is great for large systems where the time and cost associated with fitting a high wattage array needs to be minimised.In order to achieve high output this solar panel uses innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel for the same power rating.On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.The panel is encased in a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. The waterproof design and non-corrosive materials ensure that the panel can be used in all weather conditions and locations, including marine applications where contact with sea water is likely.Each individual solar panel is thoroughly tested to the highest quality standards, and labelled with a unique serial number for further quality control and increased warranty protection. Specifications: Peak power: 300W Maximum power voltage: 32.70V Maximum power current: 9.17A Open circuit voltage: 39.80V Short circuit current: 9.78A Power tolerance: 0/+3% Dimensions: 164 x 99 x 3.5 cm Weight: 19 kg Mounting holes for installation 2 x 1m of high quality single core solar cable 4.0mm² cross section Male and female MC4 connectors

200W black semi-flexible fibreglass solar panel with round rear junction box and 3m cable, with durable ETFE coating

This highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This model also features a rear-fitted circular junction box and 3m dual core cable. This high efficiency 200W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 3.65kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Junction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 5-busbar solar cells: This panel also features new generation 5-busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Simple, professional installation: This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface. This solar panel has a unique black backing, making it ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Solar panel specifications: Peak power: 200W Maximum power voltage: 20.5V Maximum power current: 9.76A Open circuit voltage: 24.0V Short circuit current: 10.24A Dimensions: 1500 x 680 x 2 mm Weight: 3.65 kg

...Read more View Product

£705.99

180w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15

180w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs) Highly efficient German Cells with a Durable ETFE Coating This 180w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 180w Semi-Flexible Durable Solar Panel Dimensions: 1595 x 699 x 2 mm Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) Double entry Roof Gland 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 5 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar Panel Specifications: This high-efficiency, waterproof 180W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications. The panel is ideal for curved roofs on boats, caravans, motorhomes, RVs etc. because it can easily fit to the shape of the roof when mounted. This panel can be instantly fitted using the peelable adhesive backing attached to the panel, or can also be secured using self-tapping screws, tenax fasteners or even zipping (not supplied). Product features: Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Incredibly light (only 3.65kg) and very thin (just 2mm) which is great for motorhome and caravan roofs High resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications 100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified. The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter). The fibreglass plastic used in this solar panel is very strong and durable. Soft and sealed edges of the solar panel make it resilient to mechanical impact on the sides and help avoid long term delamination. MPPT Specifications The Victron 75V 15amp MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£99.95

High Efficiency 20A Dual Battery Mppt Solar Charge Controller With Lcd Display For Solar Panels Up To 260W (12V Battery System) / 520W (24V Battery System)

Dual Battery ChargingThis advanced 20A 12V/24V dual battery solar controller uses advanced MPPT technology to charge two independent batteries or battery banks. The main battery is charged at high power, while a secondary battery is given a trickle charge of up to 1A. This makes it a perfect solar controller for a campervan, motorhome, boat or any other system with 2 batteries (e.g. engine and leisure battery). The main battery will be charged with a majority of the power, whilst the second battery will be trickle charged to keep it topped up and ready for use.Maximum Power Point Tracking (MPPT) TechnologyMPPT technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined solar input power allowed for this controller is 260W for a 12V battery system or 520W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full Range of Protection Functions:This charge controller features a comprehensive set of electronic protection functions to prevent reverse current at night (from the battery back to the solar panel), over-charging, short circuit, reverse polarity and more. The solar controller case is water resistant to a rating of IP33 when installed, for protection against sprays of water at up to 60 degrees from vertical.Advanced Battery Compatibility:Unlike many other less advanced solar charge controllers, this model is 100% compatible with a broad range of battery types for the main battery, such as Gel, AGM, Lead-Acid Flooded, and Lithium (LiFePO4 or Li-NiCoMn) batteries.Advanced System Functionality:The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel, system voltage recognition based on secondary battery)Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for the solar panel and each battery), battery state of charge, and accumulated charging energyEasy to use buttons allow the user to manually select the battery type (sealed, flooded, gel or Lithium), change the temperature units, and reset the in-built counters (charging energy, min/max voltages)When not in use, the system automatically goes into a low power mode, reducing standby consumption when there is no solar power available, such as when the vehicle is parked in a garageCurrent limiting function (20A) allows the possibility of adding more solar panels to your solar system in the future This model is also compatible with a remote meter MT11 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings from an easy to use and install remote screen.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely. This allows the system to optimise the charging process for lead acid batteries or provide low temperature protection for lithium batteries. Controller specifications: The most advanced MPPT technology to ensure high efficiency (>95%) of your solar system Fully automated operation and auto 12/24V selection 3 pairs of terminals (solar panel, battery 1, battery 2) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 260W (12V) / 520W (24V) Temperature sensor for automatic compensation (-3mV/°C/2V) Comprehensive electronic protection features Communication port: RS485 interface Grounding: negative common ground Current limiting function (20A) Self-consumption: <26mA Working temperature: -30°C to +80°C Size: 243.7 x 158 x 63 mm Mounting dimensions: 180 x 149 mm Weight: 1.1 kg Multiple mounting holes (5mm diameter) for ease of installation

...Read more View Product

£564.99

200w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15

200w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop-top roofs) Highly efficient German Cells with a Durable ETFE Coating This 200w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 200w Semi-Flexible Durable Solar Panel Dimensions: 1420 x 710 x 2 mm Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) Double entry Roof Gland 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 3 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar panel specifications: Peak power: 200W Maximum power voltage: 17.6V Maximum power current: 11.36A Open circuit voltage: 20.8V Short circuit current: 12.05A Dimensions: 1420 x 710 x 2 mm Weight: 3.65 kg Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 3.65kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 9-busbar solar cells: This panel also features new generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). MPPT Specifications The Victron 75V 15amp MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£604.99

320w Large Solar Panel Kit with Victron Smartsolar MPPT

320w Large Solar Panel Kit with Victron Smartsolar MPPT - Perfect for Campervans, Motorhomes & Off Grid Projects This large 320w Rigid Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and battery charging efficiency. The ETFE covering makes the solar panel extremely durable and resistant. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. 320w Solar panel kit including: Monocrystalline Panel - Dimensions: 179 x 99 x 4 cm Victron 100/30 Smartsolar MPPT Solar Charge Controller 2 x black 5m 6mm PV Solar Cable with MC4 Connectors 2 x 5m (6mm) solar extension cables with MC4 connectors8 x Z Brackets or 7 Piece ABS Plastic Solar Panel Mount Kit with Double Entry Roof Gland1 x Ressetable Circuit Breaker1 x MPPT to Battery Cables with In-Line Fuse This high-efficiency 320W monocrystalline solar panel is one of the largest solar panels available on the market. It is perfect for permanent outdoor use to provide free electricity in any grid-tie, hybrid or off-grid application (such as charging batteries in vehicles or boats, or powering an off-grid house or cabin, or working with a grid-tie / hybrid inverter to feed energy into the electrical grid). Due to the size of the area that this solar panel covers it is great for large systems where the time and cost associated with fitting a high-wattage array needs to be minimised. In order to achieve high output this solar panel uses innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel for the same power rating. On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system. The panel is encased in a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. The waterproof design and non-corrosive materials ensure that the panel can be used in all weather conditions and locations, including marine applications where contact with sea water is likely. Each individual solar panel is thoroughly tested to the highest quality standards, and labeled with a unique serial number for further quality control and increased warranty protection. Solar panel specifications: Peak power: 320W Maximum power voltage: 18.35V Maximum power current: 17.88A Open circuit voltage: 21.85V Short circuit current: 19.04A Power allowance range: +/- 3% Dimensions: 179 x 99 x 4 cm Weight: 19.5 kg 8 mounting holes 9 x 14 mm 2 x 5m of high quality single core solar cable (6.0mm cross section) Male and female MC4 connectors Features of the Victron SmartSolar MPPT 100/30: Feature highlights • Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetooth enabled device • Ultra-fast Maximum Power Point Tracking (MPPT) • Advanced Maximum Power Point Detection in case of partial shading conditions • Load output on the small models • Battery Life: intelligent battery management by load shedding • Automatic battery voltage recognition • Flexible charge algorithm • Over-temperature protection and power de-rating when temperature is high. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£635.00

T4/T5/T6 Pop Top Flexible Solar Panel Kit with Victron SmartSolar MPPT 75/15

200w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4) Highly efficient Black German Cells Our flexible solar panel complete kit is suitable for many vehicle types, boats and off-grid applications. Kit Contents 200w Semi-Flexible Durable Black Solar Panel 1500 x 680 x 4 mm Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 x 5m Black) 3 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar Panel Specifications: Aluminum reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminum fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminum reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Simple, professional installation:This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface.This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 5.85kg) which is great for all vehiclesHigh resistance to salt water environment (junction box and cables underneath are protected from contact with water) and possibility to walk on the panel make it perfect for boats and yachtsSealed waterproof design ensures the panel can be used in all weather conditionsJunction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting.Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Solar panel specifications: Peak power: 200W Maximum power voltage: 19.8V Maximum power current: 10.10A Open circuit voltage: 23.4V Short circuit current: 10.71A Power allowance range: +/- 5% Solar Panel dimensions: 1500 x 680 x 4 mm Junction Box diameter: 30 mm Weight: 5.85 kg 1 x 3m high quality dual core solar cable attached (4mm2 cross section) MPPT Specifications The Victron 75V 15A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£389.00

320W 12V Rigid Solar Panel with 5M CABLE

This high efficiency, waterproof 320W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps). The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller. The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. Solar panel specifications: Peak power: 320W Maximum power voltage: 18.35V Maximum power current: 17.88A Open circuit voltage: 21.85V Short circuit current: 19.04A Power allowance range: +/- 3% Dimensions: 179 x 99 x 4 cm Weight: 19.5 kg 8 mounting holes 9 x 14 mm 2 x 5m of high quality single core solar cable (6.0mm cross section) Male and female MC4 connectors

£138.99

100W 12V Solar Charging Kit With 10A Controller And 5M Cable

This kit includes:100W monocrystalline solar panel with 5m of solar cable and MC4 connectorsAdvanced 10A Photonic Universe solar charge controller 100W solar panel:The waterproof high efficiency Photonic Universe 100W monocrystalline solar panel included in this kit is perfect for permanent outdoor use to provide free electricity to charge a 12V battery to power hundreds of devices and electrical appliances.The long-lasting monocrystalline solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.The panel comes with 5m of special solar cable which can operate at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of the cable for easy connection to to other solar panels or 4mm extension cable. The MC4 connectors can also be cut off when wiring to the screw terminals of the 10A solar charge controller.Each individual solar panel is thoroughly tested to the highest quality standards, and labelled with a unique serial number for further quality control and increased warranty protection.10A solar charge controller:The kit includes a 10A Photonic Universe solar charge controller designed to protect batteries whilst charging them, having automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This solar controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below)The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. The controller is not waterproof and should be used indoors.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 100WMaximum power voltage: 19.3VMaximum power current: 5.18AOpen circuit voltage: 22.9VShort circuit current: 5.56APower allowance range: 0~+3%Dimensions: 1200 x 540 x 35 mmWeight: 8.5 kg4 mounting holes2 x 5m of high quality single core solar cable (4.0mm² cross section) with MC4 connectors attached Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty

£164.99

Victron Energy SmartSolar MPPT 150/35 – Solar Charge Controller - SCC115035210

Victron Energy SmartSolar MPPT 150/35 – Solar Charge Controller - SCC115035210 This Victron 150V 35A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. SmartSolar MPPT controllers uniquely feature built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device.Ultrafast MPPT Technology:This 35A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, reverse polarity, overvoltage, overcurrent and reverse current, as well as battery overvoltage, reverse polarity and overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional control panel:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage. Other features:The Victron SmartSolar MPPT 150-35 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36* / 48V selection- 2 pairs of terminals (solar panel, battery) for wires up to 16mm2- Inbuilt bluetooth- Max solar panel voltage: 150V- Max solar panel power: 500W (12V) / 1000W (24V) / 1500W (36V) / 2000W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -68mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 20mA (12V) / 15mA (24V) / 10mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 130 x 186 x 70 mm- Weight: 1.25kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£59.49

Pair Of 15M Single Core Extension Cable Leads 6.0Mm For Solar Panels And Solar Charging Kits

Pair Of 15 Metre Single Core Extension Cable Leads 6.0Mm For Solar Panels And Solar Charging Kits This pair of single core solar extension cables is specially designed for solar panels to carry high current and have negligible power loss. It comes with waterproof MC4 connectors ("male" on one lead, "female" on the other lead) which can be easily connected to similar MC4-type connectors coming with most solar panels, including Photonic Universe solar panels. This cable is suitable for all weather conditions including cold and hot temperatures.

...Read more View Product

£135.99

60W Reinforced Semi-Flexible Solar Panel With A Durable Etfe Coating (German Solar Cells)

This high efficiency 60W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 60W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 2.35kg) which is great for all vehiclesHigh resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts.Sealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 0.9m of cable specially designed for solar panels to carry high currents with negligible power loss (2.5mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system, for linking several panels together or for connecting 2.5mm extension cable. Solar panel specifications: Peak power: 60W Maximum power voltage: 20.2V Maximum power current: 2.97A Open circuit voltage: 23.9V Short circuit current: 3.15A Power allowance range: +/- 5% Solar Panel Dimensions: 720 x 505 x 4 mm Junction Box Dimensions: 90 x 16 x 16 mm Weight: 2.35 kg 2 x 0.9m of high quality single core solar cable (2.5mm² cross section) Male and female MC4 connectors

...Read more View Product

£54.99

Solar Aero Mounts - Set Of 2 X 67Cm Aluminium Solar Panel Mounting Brackets/Spoilers For Fitting Solar Panels To Motorhomes, Caravans, Boats Or Roofs

Solar Aero Mounts - Set Of 2 X 67Cm Aluminium Solar Panel Mounting Brackets/Spoilers For Fitting Solar Panels To Motorhomes, Caravans, Boats Or Roofs Key features: Ideal for bonding to the roof - no need for drilling Minimum wind drag and a good looking installation Great for motorhomes, campervans, caravans, vans and boats, but can also be used on other flat roofs Enhanced security - once installed, the solar panel would not be easy to remove Perfect for rigid frame solar panels with 67cm width

...Read more View Product

£238.99

100W black ultra-narrow semi-flexible fibreglass solar panel with durable ETFE coating

This highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and is made from monocrystalline solar cells. This high efficiency 100W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Unique ultra-narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 350mm wide). Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) Black backing makes the solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces The panel is incredibly light (only 1.72kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 100W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 5-busbar solar cells: This panel also features new generation 5-busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. All-black design: This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 100W Maximum power voltage: 18.2V Maximum power current: 5.50A Open circuit voltage: 21.3V Short circuit current: 5.77A Dimensions: 1520 x 350 x 2 mm Weight: 1.72 kg

...Read more View Product

£589.99

300w Large Solar Panel Kit with Victron Smartsolar MPPT

300w Large Solar Panel Kit with Victron Smartsolar MPPT This 300w Rigid Solar Panel Kit for campervans, off-grid, motorhomes and yachts/boats includes a Victron SmartSolar MPPT 100/30 charge controller for maximum power output and battery charging efficiency. The ETFE covering makes the solar panel extremely durable and resistant. This 300w solar panel kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. 300w solar panel kit including: Monocrystalline Panel - Dimensions: 164 x 99 x 3.5 cmVictron 100/30 Smartsolar MPPT Solar Charge Controller2 x black 5m 6mm PV Solar Cable with MC4 Connectors2 x 5m (6mm) solar extension cables with MC4 connectors7 Piece ABS Plastic Solar Panel Mount Kit with Double Entry Roof Gland This high efficiency 300W monocrystalline solar panel is one of the largest solar panels available on the market. It is perfect for permanent outdoor use to provide free electricity in any grid-tie, hybrid or off-grid application (such as charging batteries in vehicles or boats, or powering an off-grid house or cabin, or working with a grid-tie / hybrid inverter to feed energy into the electrical grid). Due to the size of the area that this solar panel covers it is great for large systems where the time and cost associated with fitting a high wattage array needs to be minimised.In order to achieve high output this solar panel uses innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel for the same power rating.On the back of the 300w solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.The panel is encased in a robust 35mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. The waterproof design and non-corrosive materials ensure that the panel can be used in all weather conditions and locations, including marine applications where contact with sea water is likely.Each individual 300w solar panel is thoroughly tested to the highest quality standards, and labeled with a unique serial number for further quality control and increased warranty protection. Specifications: Peak power: 300W Maximum power voltage: 32.70V Maximum power current: 9.17A Open circuit voltage: 39.80V Short circuit current: 9.78A Power tolerance: 0/+3% Dimensions: 164 x 99 x 3.5 cm Weight: 19 kg Mounting holes for installation 2 x 1m of high quality single core solar cable 4.0mm² cross section Male and female MC4 connectors Features of the Victron SmartSolar MPPT 100/30: Feature highlights• Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetoothenabled device• Ultra-fast Maximum Power Point Tracking (MPPT)• Advanced Maximum Power Point Detection in case of partial shading conditions• Load output on the small models• Battery Life: intelligent battery management by load shedding• Automatic battery voltage recognition• Flexible charge algorithm• Over-temperature protection and power de-rating when the temperature is high. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£329.00

250W 12V Solar Panel with 5M of Cable

This high efficiency, waterproof 250W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps). The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system or 6mm extension cable. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller. The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. Solar panel specifications: Peak power: 250W Maximum power voltage: 20.2V Maximum power current: 12.38A Open circuit voltage: 23.9V Short circuit current: 13.12A Power allowance range: +/- 3% Dimensions: 139 x 99 x 4 cm Weight: 15.3 kg 8 mounting holes 9 x 14 mm 2 x 5m of high quality single core solar cable (6.0mm cross section) Male and female MC4 connectors

£229.99

100W Reinforced Ultra-Narrow Semi-Flexible Solar Panel With A Durable Etfe Coating

At Van Junkies we love high quality solar products. That's why we have developed this highly durable semi-flexible solar panel reinforced with anodised aluminium, a strong ETFE surface and made from monocrystalline solar cells. This high efficiency 100W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Aluminium reinforcement and strong ETFE coating: This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market. In addition to the aluminium reinforcement, the surface of this 100W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 5-busbar solar cells: This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. Other benefits: Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws) Unique ultra-narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 35cm wide). The panel is incredibly light (only 3.1kg) which is great for all vehicles. High resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts. Sealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 100W Maximum power voltage: 17.6V Maximum power current: 5.68A Open circuit voltage: 20.8V Short circuit current: 6.02A Power allowance range: +/- 5% Solar Panel Dimensions: 1520 x 350 x 4 mm Junction Box Dimensions: 90 x 16 x 16 mm Weight: 3.1 kg 2 x 1m of high quality single core solar cable (4mm² cross section) Male and female MC4 connectors

50W Reinforced Narrow Semi-Flexible Solar Panel With A Durable Etfe Coating (German Solar Cells)

This high efficiency 50W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 50W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)Unique narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 35cm wide)The panel is incredibly light (only 2kg) which is great for all vehiclesHigh resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts.Sealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 90 cm of cable specially designed for solar panels to carry high currents with negligible power loss (2.5mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system, for linking several panels together or for connecting 4mm extension cable. Solar panel specifications: Peak power: 50W Maximum power voltage: 20.2V Maximum power current: 2.48A Open circuit voltage: 23.9V Short circuit current: 2.62A Power allowance range: +/- 5% Solar Panel Dimensions: 880 x 350 x 4 mm Junction Box Dimensions: 90 x 16 x 16 mm Weight: 2.00 kg 2 x 90 cm of high quality single core solar cable (2.5mm² cross section) Male and female MC4 connectors

£754.99

Victron 740W Monocrystalline Solar kit with SmartSolar 150/45 MPPT, Cables & MC4s

740W Victron Energy Mono Solar Panel Kit - Perfect for Campervans, Motorhomes & Boats Panel sizes are 1485x668x30mm This 740w Large Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 150/45 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit with Victron 4 * 185W Monocrystalline panels, 4 * mount sets (optional), Cable entry Gland, Victron SmartSolar Bluetooth enabled 150/45 MPPT charge controller, 5m of Black PV Extension Cable s(x2) with MC4 Connectors, 3x interconnect cables to wire the panels in series. Mounts available (optional): 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets This highly efficient Victron solar 740w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Wiring guide for Solar Panel Kits in Series

...Read more View Product

£219.99

100W Black Reinforced Narrow Semi-Flexible Solar Panel With A Durable Etfe Coating

At Van Junkies we love high quality solar products. That's why we have developed this highly durable black semi-flexible solar panel reinforced with anodised aluminium, a strong ETFE surface and made from monocrystalline solar cells. This high efficiency 100W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Aluminium reinforcement and strong ETFE coating: This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market. In addition to the aluminium reinforcement, the surface of this 100W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 5-busbar solar cells: This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. All-black design: This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Other benefits: Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws) Unique narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 51cm wide) Black backing makes the solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces The panel is incredibly light (only 3.15kg) which is great for all vehicles High resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts Sealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 0.9m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 100W Maximum power voltage: 18.2V Maximum power current: 5.49A Open circuit voltage: 21.4V Short circuit current: 5.82A Power allowance range: +/- 5% Solar Panel Dimensions: 1060 x 510 x 4 mm Weight: 3.15 kg 2 x 0.9m of high quality single core solar cable (4mm² cross section) Male and female MC4 compatible connectors

...Read more View Product

£104.99

30W Reinforced Ultra-Narrow Semi-Flexible Solar Panel With A Durable Etfe Coating

At Van Junkies we love high quality solar products. That's why we have developed this highly durable semi-flexible solar panel reinforced with anodised aluminium, a strong ETFE surface and made from monocrystalline solar cells. This high efficiency 30W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Aluminium reinforcement and strong ETFE coating: This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market. In addition to the aluminium reinforcement, the surface of this 30W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 5-busbar solar cells: This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. Other benefits: Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws) Unique ultra-narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 20cm wide) The panel is incredibly light (only 1.25kg) which is great for all vehicles High resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts. Sealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 90 cm of cable specially designed for solar panels to carry high currents with negligible power loss (2.5mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 30W Maximum power voltage: 17.6V Maximum power current: 1.7A Open circuit voltage: 20.2V Short circuit current: 1.8A Power allowance range: +/- 5% Solar Panel Dimensions: 970 x 200 x 4 mm Junction Box Dimensions: 90 x 16 x 16 mm Weight: 1.25 kg 2 x 90 cm of high quality single core solar cable (2.5mm² cross section) Male and female MC4 connectors

...Read more View Product

£82.00

Victron Energy BlueSolar MPPT 100/20 – SCC110020170R

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on Victron for details Day/night timing and light dimming option See the software section on Victron for details Programming, real-time data and history display options – Color Control GX or other GX devices: see the Venus documents on our website. – A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC110020170R GTIN 8719076049845 Voltage 12/24/48V Rated Charge Current 20A Nominal PV Power, 12V 290W Max. PV Short Circuit Current 20A Max. PV Open Circuit Voltage 100V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H100 x W113 x D60mm Weight 0.65Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£37.54

Victron Monocrystalline panel 30W-12V Mono 560x350x25mm series 4a SPM040301200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£1,164.99

Off Grid Solar Kit - 2Kw Hybrid Inverter - 370w Solar - 250ah AGM Battery Storage

370w Complete Off-Grid Starter Solar Power System With 2 X 185W Solar Panels, 2Kw Hybrid Inverter And 2 x 125ah of AGM Battery Storage This off-grid solar inverter kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including a Victron solar panel and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high-efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.Off Grid Solar Kit includes:2 x 185W Victron solar panelsIconica Hybrid 2000W 24V pure sine wave inverter2 x 125Ah AGM deep cycle leisure batteries50ah circuit breakerA pair of 5m 6mm2 solar extension cables with MC4 connectors8m of 25mm2 tinned copper battery cablesBattery Lug2 x 6 Piece Solar panel Mount Kits or Z Brackets1 x Double Entry Roof Gland1 x Victron Battery Kill Switch1 x Meg Fuse & Holder This off grid solar kit can easily be expanded with additional solar panels and battery storage at any stage. The Iconica 2000W 24V hybrid inverter intelligently combines the functions of a 2000W pure sine wave inverter, 40A MPPT solar charge controller and a 20A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative off grid solar inverter features advanced communication functions, along with a menu full of highly customisable settings. This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This off grid solar inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts. Key functions: 1. 2000W 24V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 2000VA of continuous power with a strong peak power handling capability of up to 4000VA (to start appliances with electric motors). This off grid solar inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 40A MPPT solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to a load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 20A Smart battery charger: Designed to enable safe and efficient unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages. Additional intelligent features: The Iconica 2000W 24V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include: - Output source priority: This intelligent feature allows the user to set output source preferences(solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc. - Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc. - A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc. - Advanced communication options: The inverter is supplied with a PC connection cable and PC software CD for convenient viewing of important system information, such as: solar/ battery/ AC voltage, charging current, battery capacity etc. Detailed data logs are also available to view and export to PDF/ Excel formats. This inverter also has the potential to send data to an online user portal using a Wi-Fi connection kit or mobile app Wi-Fi kit (purchased separately). By connecting via one of these methods, the user will unlock access to exclusive features such as email / push notification status updates for the inverter, remote system monitoring from any location and much more. - Auto restart function: When overload or overheating occurs, the inverter will disconnect the load appliances, and automatically reconnect once safe conditions are detected. The inbuilt fan is helps to maintain an optimal operational temperature. - Intelligent cooling design: The inverter uses predictive fan logic based on performance and temperature (1 or 2 fans operating at a time, with variable speeds) to prevent over-heating of the components. Our AGM deep-cycle batteries are non-spillable, completely sealed and maintenance-free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate. 175w Solar Panel Specifications Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Brand Victron Energy Manufacturer Part Number SPM041751200 GTIN 8719076040361 Voltage 12V Nominal Power 175W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Dimensions L1485 x W668 x D30mm Weight 11Kg Warranty 5 Years Hybrid Solar inverter specifications: Nominal battery voltage: 24V Continuous power output: 2000W / 2000VA Surge power: 4000VA Output voltage: 230V AC Output frequency: 50Hz /60 Hz Output waveform: Pure sine wave Maximum solar input power: 1000W Maximum open circuit solar input voltage: 102V Maximum solar charging current: 40A MPPT operating voltage range: 30V – 80V Maximum mains AC charging current: 20A Maximum combined charging current: 60A Peak efficiency: 93% Operating temperature: -10C to 50C Supplied with: 1.5m AC power cable with 3-pin UK plug PC connection cable and PC software CD Size: 32 x 22.5 x 8.8 cm Weight: 5.5 kg

...Read more View Product

£291.99

110Ah Leisure Battery, 90W Solar Panel Kit with Charge Controller, Cable and Brackets

Package consists of 1x XV110 (Titanium), 1x SCC075010060R, 1x SPM040901200, 1x SCA000500000 & 1x Z Bracket & 1 x Roof Gland Titanium XV110 Dual Purpose Leisure Battery This heavy duty deep cycle battery is designed to meet the needs of leisure and marine vehicles. With its sealed calcium construction which makes it 100% maintenance free this battery is fast becoming a favourite within the industry. This range is suited to seasonal use such as Caravans Motorhomes Boats RV Camping and much more. The product is supplied charged and ready to fit. Features Excellent design handle – Easy battery replacement Integrated computer designed and reinforced container – Protection from vibrations and impact Sealed covers – Prevents acid leaks and minimizes gassing Totally sealed and spill proof Maintenance Free – no topping up required Glass fibre separators Safety venting system Sealed water recombination system Tough polypropylene case design Victron Energy SmartSolar MPPT 75/10 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on our website for details Day/night timing and light dimming option See the software section on Victron for details Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. Victron Energy Solar Panel 12V 90W Mono series 4a Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Victron Energy Solarcable L=5m/4sqmm MC4-M/F 5m/4spmm MC4-M/F of Solarcable Z Bracket Mounting Aluminium Fixing Set These brackets are made from 2mm aluminium Included: 4x Z-Shape Tabbed Solar Panel Brackets 8x Stainless Steel Self Tapping Screws 4x Stainless Steel Spring Washers 4x Stainless Steel Short Bolts 4x Stainless Steel Washers 4x Stainless Steel Nuts Brand Titanium & Victron Energy Manufacturer Part Number XV110 (Titanium), SCC075010060R, SPM040901200, SCA000500000 and Z Bracket Battery Voltage 12V Battery Capacity (C20) 110Ah Battery Cold Cranking 800CCA Terminal Type A, Standard Automotive Terminal Layout Right Hand Positive Battery Dimensions (Including Terminals) L354 x W174 x H190mm Battery Weight 23.8Kg Battery Warranty 4 Years Battery Technology Sealed Calcium Battery Application Dual Purpose MPPT Voltage 12/24V Rated Charge Current 10A Nominal PV Power, 12V 145W Max. PV Short Circuit Current 13A Max. PV Open Circuit Voltage 75V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% MPPT Dimensions H100 x W113 x D40mm MPPT Weight 0.5Kg MPPT Warranty 5 Years MPPT Country of Manufacture India Solar Panel Voltage 12V Nominal Power 90W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Solar Panel Dimensions L780 x W668 x D30mm Solar Panel Weight 6.1Kg Solar Panel Warranty 5 Years Solar Panel Country of Manufacture China Cable Length 5m Cable Thickness 4sqmm Cable Country of Manufacture China

...Read more View Product

£44.99

Victron Energy BlueSolar MPPT 75/10 – SCC010010050R

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on Victron for details. Day/night timing and light dimming option See the software section on Victron for details. Programming, real-time data and history display options – Color Control GX or other GX devices: see the Venus documents on our website. – A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC010010050R GTIN 8719076025306 Voltage 12/24V Rated Charge Current 10A Nominal PV Power, 12V 145W Max. PV Short Circuit Current 13A Max. PV Open Circuit Voltage 75V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H100 x W113 x D40mm Weight 0.5Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£367.99

Victron Energy SmartSolar MPPT 250V 60A Tr – 250/60 SCC125060221

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Remote Monitoring and Control Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. Synchronized parallel charging with Bluetooth Up to 10 units can be synchronized with Bluetooth. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. Brand Victron Energy Manufacturer Part Number SCC125060221 GTIN 8719076050841 Voltage 12/24/48V Rated Charge Current 60A Nominal PV Power, 12V 860W Max. PV Short Circuit Current 35A Max. PV Open Circuit Voltage 250V absolute maximum coldest conditions 245V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled Yes Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture Malaysia

...Read more View Product

£245.00

120W Reinforced Semi-Flexible Solar Panel With A Durable Etfe Coating (German Solar Cells)

We love high quality solar products. That's why we have developed this highly durable semi-flexible solar panel reinforced with anodised aluminium and a strong ETFE surface and made from German monocrystalline solar cells. This high efficiency 120W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 120W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 4.35kg) which is great for all vehiclesHigh resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts.Sealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system, for linking several panels together or for connecting 4mm extension cable. Solar panel specifications: Peak power: 120W Maximum power voltage: 20.2V Maximum power current: 5.94A Open circuit voltage: 23.9V Short circuit current: 6.30A Power allowance range: +/- 5% Solar Panel Dimensions: 1025 x 665 x 4 mm Junction Box Dimensions: 90 x 16 x 16 mm Weight: 4.35 kg 2 x 1m of high quality single core solar cable (4mm² cross section) Male and female MC4 connectors

£279.99

130W Black Reinforced Narrow Semi-Flexible Solar Panel With A Durable Etfe Coating (German Solar Cells)

We love high quality solar products. That's why we have developed this highly durable black semi-flexible solar panel reinforced with anodised aluminium and a strong ETFE surface and made from German monocrystalline solar cells. This high efficiency 130W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 130W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.All-black design:This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)Unique narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 50.5cm wide)Black backing makes the solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfacesThe panel is incredibly light (only 4.4kg) which is great for all vehiclesHigh resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachtsSealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system, for linking several panels together or for connecting 4mm extension cable. Solar panel specifications: Peak power: 130W Maximum power voltage: 20.2V Maximum power current: 6.44A Open circuit voltage: 23.9V Short circuit current: 6.82A Power allowance range: +/- 5% Solar Panel Dimensions: 1460 x 505 x 4 mm Weight: 4.4 kg 2 x 1m of high quality single core solar cable (4mm² cross section) Male and female MC4 connectors

£579.99

250w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT

250w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/20 - (These kits are perfect for pop-top roofs) Highly efficient Cells with a Durable ETFE Coating This 250w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 250w Semi-Flexible Durable Solar Panel Dimensions: 1530 x 990 x 2.5 Victron Energy SmartSolar MPPT 100/20 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) Double entry Roof Gland 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 2 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar panel specifications: Fully waterproof and light weight design at just 4.5kg Low profile with a thickness of just 2mm Semi-flexible with up to 20° flexibility Attractive black finish with 1.5 metre cable High-efficiency levels 2-year warranty Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). MPPT Specifications The Victron 100/20 MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 20A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Other features:The Victron SmartSolar MPPT 100/20 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£359.99

150W Semi-Flexible Fibreglass Solar Panel With A Round Rear Junction Box And 3M Cable, With Durable Etfe Coating

150W Semi-Flexible Fibreglass Solar Panel With A Round Rear Junction Box And 3M Cable, With Durable Etfe Coating - 3 Year Warranty At Van Junkies we love high-quality solar products. That's why we have developed this highly durable semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This model also features a rear-fitted circular junction box and 3m dual core cable. This high-efficiency 150W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and backup solar power systems. The panel can also be used to provide a direct power supply for applications not sensitive to changes in input voltage/current (e.g. electric motors or pumps) and for various grid-tie applications. Dimensions: 1080 x 710 x 2 mm Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel A specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The rear junction box allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting The panel is incredibly light (only 2.68kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 150W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High-quality 9-busbar solar cells: This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Simple, professional installation: This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut into the roof/surface.

...Read more View Product

£209.99

Victron Energy SmartSolar MPPT 150V 45A – 150/45 SCC115045212

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultrafast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F). Flexible charge algorithm Fully programmable charge algorithm (see the software page on Victron), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection – Over-temperature protection and power derating when temperature is high. – PV short circuit and PV reverse polarity protection. – PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function Brand Victron Energy Manufacturer Part Number SCC115045212 GTIN 8719076053026 Voltage 12/24/48V Rated Charge Current 45A Nominal PV Power, 12V 650W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H130 x W186 x D70mm Weight 1.25Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£109.99

High Efficiency 30A Mppt Solar Charge Controller For Solar Panels Up To 390W (12V) / 780W (24V) Up To 100V

MPPT Technology:This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined input solar power allowed for this controller is 390W for a 12V battery system or 780W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full system protection:This charge controller features a comprehensive set of electronic protection functions to ensure the maximum possible efficiency of your solar system. These include: reverse current prevention at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, solar panel over voltage, over load, short circuit and reverse polarity protection. The controller also has self-diagnostic capability and highlights any system errors using advanced fault-targeting technology. Lithium Battery charging:This solar charge controller is compatible with lithium batteries when a lithium battery charging program is selected using PC software (see below for more details).Advanced system monitoring:The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel)Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energyEasy to use buttons allow the user to manually select the battery type (sealed, flooded or gel) and program load settings (e.g. set timers for lighting, fans, pumps etc).Current limiting function (30A) allows the possibility of adding more solar panels to your solar system in the future Multiple connectivity optionsThis model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only). If using the RJ45 to USB cable, the user also has the option to create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and can also set the charging parameters for lithium batteries.Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. (Inbuilt temperature sensor is not enabled for lithium batteries).

...Read more View Product

£63.22

Victron Monocrystalline panel 55W-12V Mono 545x668x25mm series 4a SPM040551200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£290.99

Victron 130W Monocrystalline Solar panel kit with SmartSolar MPPT, Cables & MC4

130W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats Panel sizes are 1020x668x30mm This 130w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron Smartsolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit with Victron 130W Monocrystalline panel, optional plastic or aluminium mounting brackets, Cable entry Gland, Victron 75/15 Smartsolar MPPT charge controller, 10m of Black PV Cable (2 x 5m) & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cables with In-Line Fuse. Mounts Optional: 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets Ideal for charging battery banks up to 250ah This highly efficient Victron solar 130w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£879.99

270w Flexible Durable ETFE Solar Panel Kit with Victron SmartSolar MPPT 100/20

270w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/20 - (These kits are perfect for pop top roofs VW T6/T5/T4). Highly efficient German Cells This 270w Flexible Durable ETFE Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and efficient charging of your battery. The ETFE material of the solar panel makes it extremely durable and resistant to extreme weather conditions. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 270w Flexible Durable Solar Panel with ETFE Coating Dimensions: 1595 x 1020 mm Victron Energy SmartSolar MPPT 100/20 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) Cable Entry Roof Gland 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 3 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar Panel Specifications: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 5kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High-quality 9-busbar solar cells: This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 270W Maximum power voltage: 24.2V Maximum power current: 11.16A Open circuit voltage: 28.6V Short circuit current: 11.83A Dimensions: 1940 x 710 x 2 mm Weight: 5.00 kg MPPT Specifications The Victron 100V 20A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent battery life function.Ultrafast MPPT Technology:This 20A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high-speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 100/20 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£138.99

50W Reinforced Ultra-Narrow Semi-Flexible Solar Panel With A Durable Etfe Coating

At Van Junkies we love high quality solar products. That's why we have developed this highly durable semi-flexible solar panel reinforced with anodised aluminium, a strong ETFE surface and made from monocrystalline solar cells. This high efficiency 50W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Aluminium reinforcement and strong ETFE coating: This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market. In addition to the aluminium reinforcement, the surface of this 50W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 5-busbar solar cells: This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. Other benefits: Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws) Unique ultra-narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 20cm wide) The panel is incredibly light (only 1.75kg) which is great for all vehicles High resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts. Sealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 90 cm of cable specially designed for solar panels to carry high currents with negligible power loss (2.5mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system. Solar panel specifications: Peak power: 50W Maximum power voltage: 17.6V Maximum power current: 2.84A Open circuit voltage: 20.2V Short circuit current: 3.01A Power allowance range: +/- 5% Solar Panel Dimensions: 1540 x 200 x 4 mm Junction Box Dimensions: 90 x 16 x 16 mm Weight: 1.75 kg 2 x 90 cm of high quality single core solar cable (2.5mm² cross section) Male and female MC4 connectors

£69.49

20W Reinforced Semi-Flexible Solar Panel With A Durable Etfe Coating (German Solar Cells)

This high efficiency 20W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 20W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 1.1kg) which is great for all vehiclesHigh resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts.Sealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 0.9m of cable specially designed for solar panels to carry high currents with negligible power loss (2.5mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system, for linking several panels together or for connecting 2.5mm extension cable. Solar panel specifications: Peak power: 20W Maximum power voltage: 17.5V Maximum power current: 1.14A Open circuit voltage: 21.6V Short circuit current: 1.21A Power allowance range: +/- 5% Solar Panel Dimensions: 450 x 350 x 4 mm Junction Box Dimensions: 90 x 16 x 16 mm Weight: 1.10 kg 2 x 0.9m of high quality single core solar cable (2.5mm² cross section) Male and female MC4 connectors

...Read more View Product

£319.00

360W Monocrystalline Solar Panel With 1M Cable

This high efficiency 360W monocrystalline solar panel is the largest solar panel in our product catalogue and is by far one of the largest and most powerful solar panels available on the UK and worldwide market. It is perfect for permanent outdoor use to provide free electricity in any grid-tie, hybrid or off-grid application (such as charging batteries in vehicles or boats, or powering an off-grid house or cabin, or working with a grid-tie / hybrid inverter to feed energy into the electrical grid). Due to the size of the area that this solar panel covers (nearly 2m2) it is great for large systems where the time and cost associated with fitting a high wattage array needs to be minimised.In order to achieve high output this solar panel uses innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel for the same power rating.On the back of the solar panel there is an IP68 (fully waterproof) junction box with 1m of special solar cable which can operate at high roof temperatures with minimum power losses. A pair of male / female MC4 compatible connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system.The panel is encased in a robust 40mm thick frame made of anodized aluminium alloy for structural rigidity and many years of stable output. The waterproof design and non-corrosive materials ensure that the panel can be used in all weather conditions and locations, including marine applications where contact with sea water is likely.Each individual solar panel is thoroughly tested to the highest quality standards, and labelled with a unique serial number for further quality control and increased warranty protection. Specifications: Peak power: 360W Maximum power voltage: 38.90V Maximum power current: 9.25A Open circuit voltage: 47.9V Short circuit current: 9.75A Power tolerance: 0/+3% Dimensions: 1956 x 990 x 40 mm Weight: 23 kg Mounting holes for installation 2 x 0.9m of high quality single core solar cable 4.0mm² cross section Male and female MC4 compatible connectors

£119.99

200W Monocrystalline Solar Panel with 90cm cable

This high-efficiency, waterproof 200W monocrystalline solar panel is an ideal energy solution for customers who seek reliable, renewable power for their camper vans and adventure vehicles. Designed for permanent outdoor installation, it effortlessly provides free electricity to charge 12V batteries, powering various essentials including lighting, refrigeration, electronics, and more. Whether you're customizing your van for off-grid living, weekend getaways, or extended road trips, this solar panel is also versatile enough to support additional applications such as motorhomes, boats, off-grid cabins, farms, or remote setups requiring power for telecommunications and monitoring equipment. The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions. This panel also features innovative multi-busbar solar cells, which are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. Solar panel specifications: Peak power: 200W Maximum power voltage: 17.49V Maximum power current: 11.44A Open circuit voltage: 21.12V Short circuit current: 12.24A Power allowance range: +/- 3% Dimensions: 1038 x 992 x 30mm Weight: 10.5 kg 8 mounting holes 2 x 90cm of high quality single core solar cable (4.0mm cross section) Male and female MC4 connectors

...Read more View Product

£429.99

200W Black Semi-Flexible Fiberglass Solar Panel With Round Rear Junction Box and durable ETFE coating

200W Black Semi-Flexible Fiberglass Solar Panel With Round Rear Junction Box and durable ETFE coating - 3 Year Warranty At Photonic Universe we love high quality solar products. That's why we have developed this highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This model also features a rear-fitted circular junction box and 3m dual core cable. This high efficiency 200W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 3.65kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Junction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting. Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 9-busbar solar cells: This panel also features new generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Simple, professional installation: This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut into the roof/surface. This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark-coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Solar panel specifications: Peak power: 200W Maximum power voltage: 17.6V Maximum power current: 11.36A Open circuit voltage: 23.8V Short circuit current: 12.05A Dimensions: 1390 x 710 x 2 mm Weight: 3.65 kg This product comes with a 3-year workmanship warranty which covers material and production defects

...Read more View Product

£269.00

200W 12V High Efficiency Rigid Solar Panel

This high efficiency, waterproof 200W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps). The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system or 6mm Extension Cable The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller. The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. If you are planning to use this solar panel to charge a 12V battery or battery bank: please note this panel requires a solar charge controller / regulator to charge a 12V battery. Solar panel specifications: Peak power: 200W Maximum power voltage: 20.2V Maximum power current: 9.9A Open circuit voltage: 23.9V Short circuit current: 10.52A Power allowance range: +/- 3% Dimensions: 111 x 99.2 x 4 cm Weight: 13.3 kg 8 mounting holes 9 x 11 mm 2 x 5m of high quality single core solar cable (6.0mm cross section) Male and female MC4 connectors

...Read more View Product

£379.99

Sharp High Performance NU-JC410B Black High Efficiency PERC Solar Panel

This MCS certified panel is perfect for a wide variety of applications, from grid-tie household systems to off-grid installations where mains power is limited or unavailable such as boats, caravans, campervans, cabins or glamping huts. These high-power panels are ideal for large systems where the time and expense of fitting a high wattage array needs to be minimised. High efficiency solar cells use PERC technology with 10 busbars to extract more power from a smaller surface area, increasing the output of the panel without increasing the size. The half-cut cell construction decreases internal losses, reduces risk of hotspots and improves performance in shaded conditions. The robust design of the panel is IP68 (waterproof) rated, and tested for resistance against PID, salt mist, ammonia, heavy snow, dust and sand. This thorough testing ensures a long service life even in harsh marine or wilderness conditions. A pair of male / female MC4 connectors are crimped on the end of the cable for easy waterproof connection to other solar panels, extension leads or your existing system. With a 25-year product guarantee for EU countries (12-year globally), and up to a 25-year power output guarantee, you can be confident in the quality, durability and longevity of this premium solar panel. Specifications: Peak power: 410W Maximum power voltage: 31.3V Maximum power current: 13.1A Open circuit voltage: 37.79V Short circuit current: 13.81A Power tolerance: 0/+5% Dimensions: 1722 x 1134 x 30 mm Weight: 21.8 kg Mounting holes for ease of installation 2 x 1.25m of high-quality single core solar cable Male and female MC4 waterproof connectors The product is covered by up to a 25-year product guarantee provided by Sharp Electronics. In addition, solar cells are guaranteed to produce at least 98% of nominal power in the first year after purchase and less than 0.54% degradation of nominal power each year after until 25 years after purchase, for a minimim of 85%.

...Read more View Product

£34.95

Waterproof 10A 12V Mppt Solar Charge Controller / Regulator For Caravans, Motorhomes, Campervans, Boat, Yacht And Marine Applications

This high quality waterproof 10A 12V solar charge controller is designed to protect batteries whilst charging them, with a full range of automatic protection features. The controller uses high efficiency MPPT charging technology to get the most possible power out of your solar panels.This controller stops reverse current (from the battery back to the solar panel) so your battery won't lose any charge at night and can be left permanently connected. It has many other protection functions such as over charge / discharge shut-off, over load and short circuit protection for the load terminals, overheating protection for the battery and more.This controller can work with sealed/AGM, gel and flooded/wet batteries. With a wide range of solar input voltages (up to 45V) this controller can work not only with standard off-grid solar modules, but also with on-grid panels which have higher voltage. The controller can accept up to 130W of solar panels which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a camper van or boat.In addition, the solar charge controller is completely sealed with a very high degree of water protection. It is absolutely safe to use this solar controller in all weather conditions.With the remote IR programmer (purchased separately), this controller can be wirelessly monitored and adjusted. The controller has a fully programmable timer with dimmer functionality, which monitors the dusk and dawn times based on the solar panel voltage and can adjust the percentage power of the load in 5 independently-timed stages, making this controller ideal for outdoor lighting systems. Controller specifications: Protection rating: IP67 Default charging program: 12V Gel Current rating: 10A Max solar input power: 130W Max solar input voltage: 45V Self-consumption: 6mA Ambient conditions: -35 – +60°C, 0 – 100% RH humidity, <4000m altitude Dimensions: 85.8 x 81 x 23.1 mm Weight: 260g Mounting holes for ease of installation

£218.99

150W 12V Solar Panel With 5M Cable (German Solar Cells)

We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This high efficiency, waterproof 150W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system or 4mm extension cable. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller.The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.If you are planning to use this solar panel to charge a 12V battery or battery bank: please note this panel requires a solar charge controller / regulator to charge a 12V battery. To view the full range of solar charge controllers we offer, please visit the Solar Charge Controllers category of our online shop. Solar panel specifications: Peak power: 150W Maximum power voltage: 20.2V Maximum power current: 7.43A Open circuit voltage: 23.9V Short circuit current: 7.89A Power allowance range: +/- 3% Dimensions: 112 x 67 x 3.5 cm Weight: 9.9 kg 4 mounting holes 9 x 14 mm 2 x 5m of high quality single core solar cable 4.0mm cross section Male and female MC4 connectors

£715.99

350W MCS certified black semi-flexible solar panel kit

350w MCS Certified Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/30 (5-year panel warranty) This 350w Flexible Durable MCS Certified Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and efficient charging of your battery. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 350w Flexible Durable Solar Panel with MCS Certification Dimensions: 1571 x 1137 x 3.4 mm Victron Energy SmartSolar MPPT 100/30 Sikaflex 522 Caravan / Motorhome Adhesive 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 5 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar panel specifications: Peak power: 350W Maximum power voltage: 27.47V Maximum power current: 12.75A Open circuit voltage: 33.17V Short circuit current: 13.70A Protection: IP68 Dimensions: 1571 x 1137 x 3.4 mm Weight: 7.4 kg 2 x 0.3m of 4.0m² solar cable attached The FMCS-350M is a cutting-edge 350W MCS-certified semi-flexible monocrystalline solar panel that redefines efficiency and adaptability. Built with 182mm silicon wafers, PERC technology, and half-cut cells, this panel maximises power output while reducing energy losses. Its innovative design ensures exceptional durability, lightweight construction, and superior performance, even in challenging conditions. Perfect for curved rooftops, weak load-bearing surfaces, and corrugated metal roofs, the FMCS-350M is the ideal solution for residential, commercial, and industrial solar applications.

...Read more View Product

£399.95

250W MCS certified black semi-flexible solar panel top junction box

The FMCSB-250M is a state-of-the-art 250W MCS-certified semi-flexible monocrystalline solar panel that combines high performance with a sleek, all-black aesthetic. Engineered with 182mm silicon wafers, PERC technology, and half-cut cells, this panel delivers exceptional power output while minimising energy losses. Designed for curved rooftops, weak load-bearing surfaces, and corrugated metal roofs, the FMCSB-250M is ideal for residential, commercial, and industrial solar applications where both efficiency and aesthetics matter. Advanced energy efficiency Utilising PERC and half-cut cell technology, the FMCSB-250M achieves superior energy conversion efficiency, ensuring maximum power generation in a compact and lightweight form. By reducing adaptive losses, it optimises energy output, making it a high-performance choice for installations in diverse environments. Ultra-lightweight & versatile installation Weighing just 4.1kg per unit area, the FMCSB-250M is 70% lighter than conventional solar panels, significantly reducing structural load. Despite its lightweight build, it delivers 190W per square meter of installation area, making it perfect for corrugated metal roofs, coal sheds, and curved rooftops. Its semi-flexible design allows for seamless integration on surfaces where rigid panels are impractical. Enhanced performance in shaded conditions with integrated junction box diodes The FMCSB-250M features a junction box equipped with three bypass diodes, ensuring optimal performance and reliability in various conditions. The integrated diodes mitigate the risk of hot spots caused by shaded or damaged cells, protecting the panel from potential long-term damage. By allowing the panel to continue generating electricity efficiently, even when partially shaded, the diodes enhance total energy production. In scenarios where only a portion of the panel is shaded, the bypass diodes help maintain consistent power flow, preventing significant energy loss. By reducing thermal stress and preventing excessive heat build-up, the diodes contribute to extending the overall durability and lifespan of the panel. When connected in series, the bypass diodes ensure that shading on one panel does not significantly impact the performance of the entire solar array. Built for extreme durability MCS certification guarantees that this solar panel is designed to withstand harsh environments, the FMCSB-250M has passed rigorous weather testing and is resistant to sand, dust, acid, alkali, and salt mist corrosion. Its anti-PID (Potential Induced Degradation) and hail shock resistance ensure long-lasting performance, making it a reliable choice for challenging outdoor conditions. All-black aesthetic Featuring an all-black aesthetic, the FMCSB-250M achieves a seamless, high-tech appearance with near-zero colour variation. Every component, from the cells to the backsheet, is meticulously designed for uniformity and deep black consistency. Whether viewed from different angles or under varying lighting conditions, the FMCSB-250M maintains a cohesive black tone, ensuring a sophisticated and modern look. This design harmonises with contemporary architecture, delivering a true all-black solar roof that enhances both function and form. Long-term reliability & warranty protection For long-term peace of mind, the FMCSB-250M comes with a 5-year quality and performance guarantee for vehicle/boat installations and 10-year for roof installations, along with a 25-year linear power output warranty, ensuring reliable and efficient energy generation for decades. Combining high efficiency, extreme durability, and an elegant all-black aesthetic, the FMCSB-250M semi-flexible solar panel is the perfect solution for those who want cutting-edge solar technology without compromising on design. Whether for residential, commercial, or industrial applications, this panel delivers next-level performance with a visually stunning appearance. Solar panel specifications: Peak power: 250W Maximum power voltage: 20.23V Maximum power current: 12.37A Open circuit voltage: 24.85V Short circuit current: 13.34A Protection: IP68 Dimensions: 1756 x 770 x 3.4 mm Weight: 5.6 kg 2 x 0.3m of 4.0m² solar cable attached This product is covered by a 5 year workmanship warranty for vehicle/boat installations and a 10 year warranty for roof installations

...Read more View Product

£237.99

SunPower 100W Solar Panel 12V Premium Flexible Panels

SUNPOWER 12v 100w Monocrystalline Semi Flexible Panel Ideal for the Marine Environment: Easy and Low Cost Installation: You can install the Sunpower panels with adhesives and/or use of stainless steel grommets in the panel. The panels have standard quick-connect cables. An easy-to-follow installation guide is also provided with each panel. Warranty: 5 years limited power warranty of 80% of the minimum specified power rating. Designed in the USA and assembled in France. SunPower® flexible panels are lightweight and portable, so you can take them on your next adventure. Plus, The Sunpower panels feature the highest-efficiency solar cells available which as a result means more power or faster charging times for solar-compatible batteries. Designed for ToughnessThe SunPower Maxeon® Solar Cell is the only cell built on a solid copper foundation. As a result SunPower cells are resistant to power loss via cracking and corrosion, unlike conventional cells, which are much more likely to lose power when bent or subjected to a moist environment. SunPower flexible panels are the #1 choice for customers due to the combination of high power and cell ruggedness. Made with SunPower’s highest-efficiency Maxeon® solar cells, The SUNPOWER 12v 50w Monocrystalline Semi Flexible Panel delivers the most power and highest charging capacity in its product class. Sunpower manufactures their panels using a top-grade, lightweight polymer material, allowing for easy transport, installation, and flexibility up to 30 degrees. They come with MC4 male and female connectors that can connect easily to solar-compatible devices. SunPower SPR-E-Flex-100 Features: Ratings: Voltage 17.1 VDC; Current 5.9 Amps; Power 100W Dimensions: Length 45.9"; Width 21.9", Depth 0.8" Model: SPR-E-Flex-100 Premium SunPower® 100W E-flex solar panel Dimensions: 45.9"(L) x 21.9"(W) x 0.1"(W) (0.8" including J-Box) Weight: 4.4lbs - Lightweight, Portable & Easy to Stow Rated Voltage (Vmpp) 17.1V | Rated Current (Impp) 5.9A - Powerful Flexible up to 30 degrees - Suitable for Irregular Surfaces 32 high efficiency (23%) monocrystalline Maxeon™ Gen II prime solar cells - More Power in Less Space Premium cosmetic quality Junction box with by-pass diode has IP67 protection- Robust Design, Water & Dust Proof! 17.7" long cables (12AWG) with PV4-S Connectors (MC4 compatible) - Reliable & Safe with IP68 Protection 6 x 316 Stainless steel grommets (5/16" I.D.) - Diverse Installation Options 5-Year power & 2-Year product warranty (no salt water exclusion) - Backed by SunPower Solar cells are made in the Philippines. Panel is assembled in France Individually packaged & protected for shipping. Includes safety & installation guide Solar cells made in Philippines Solar panel assembled in France

...Read more View Product

£539.99

270W Black Semi-Flexible Fibreglass Solar Panel With Round Rear Junction Box - DURABLE ETFE COATING

270W Black Semi-Flexible Fibreglass Solar Panel With Round Rear Junction Box - DURABLE ETFE COATING - 3 Year Warranty At Van Junkies we love high quality solar products. That's why we have developed this highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This model also features a rear-fitted circular junction box and 3m dual core cable. This high efficiency 270W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 5.00kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Junction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting. Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 270W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High quality 9-busbar solar cells: This panel also features new generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Simple, professional installation: This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface. This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Solar panel specifications: Peak power: 270W Maximum power voltage: 24.2V Maximum power current: 11.16A Open circuit voltage: 28.6V Short circuit current: 11.83A Dimensions: 1900 x 710 x 2 mm Weight: 5.00 kg

...Read more View Product

200W Semi-Flexible Fibreglass Solar Panel With Durable Etfe Coating

200W Semi-Flexible Fibreglass Solar Panel With Durable Etfe Coating - 3 Year Warranty At Photonic Universe we love high-quality solar products. That's why we have developed this highly durable semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This high-efficiency 200W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and backup solar power systems. The panel can also be used to provide a direct power supply for applications not sensitive to changes in input voltage/current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 3.65kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High-quality 9-busbar solar cells: This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 200W Maximum power voltage: 17.6V Maximum power current: 11.36A Open circuit voltage: 20.8V Short circuit current: 12.05A Dimensions: 1420 x 710 x 2 mm Weight: 3.65 kg This product comes with a 3 year workmanship warranty which covers material and production defects

...Read more View Product

£407.99

120w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15

120w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4) Highly efficient Black German Cells This 120w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. ns. Kit Contents 120w Semi-Flexible Durable Black Solar Panel - dimensions: 1000 x 665 x 4 mm Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) 2 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar Panel Specifications: Aluminum reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminum fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminum reinforcement, the surface of this 180W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Simple, professional installation:This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface.This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 5kg) which is great for all vehiclesHigh resistance to salt water environment (junction box and cables underneath are protected from contact with water) and possibility to walk on the panel make it perfect for boats and yachtsSealed waterproof design ensures the panel can be used in all weather conditionsJunction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting.Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Solar panel specifications: Peak power: 120W Maximum power voltage: 20.2V Maximum power current: 5.94A Open circuit voltage: 23.9V Short circuit current: 6.30A Power allowance range: +/- 5% Solar Panel dimensions: 1000 x 665 x 4 mm Junction Box diameter: 30 mm Weight: 4.30 kg 1 x 3m high quality dual core solar cable attached (4mm cross section) MPPT Specifications The Victron 75V 15A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£325.49

Victron 185W Mono Solar Panel Kit with SmartSolar MPPT 75/15, Solar cable and Mounts

This 185w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency.This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. Victron Energy Solar Panel 12V 185W Mono series 4a Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Victron Energy SmartSolar MPPT 75V 15A A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on our website for details Day/night timing and light dimming option See the software section on Victron for details Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. Victron Energy Solarcable L=5m/4sqmm MC4-M/F 5m/4spmm MC4-M/F of Solarcable Z Bracket Mounting Aluminium Fixing Set These brackets are made from 2mm aluminium Included: 4x Z-Shape Tabbed Solar Panel Brackets 8x Stainless Steel Self Tapping Screws 4x Stainless Steel Spring Washers 4x Stainless Steel Short Bolts 4x Stainless Steel Washers 4x Stainless Steel Nuts Brand Victron Energy Manufacturer Part Number SPM041851200, SCC075015060R, 2x SCA000500000 and Z Bracket Solar Panel Voltage 12V Nominal Power 175W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Solar Panel Dimensions L1485 x W668 x D30mm Solar Panel Weight 11Kg Solar Panel Country of Manufacture China MPPT Voltage 12/24V Rated Charge Current 15A Nominal PV Power, 12V 220W Max. PV Short Circuit Current 15A Max. PV Open Circuit Voltage 75V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes MPPT Dimensions H100 x W113 x D40mm MPPT Weight 0.5Kg MPPT Country of Manufacture India Cable Length 5m Cable Thickness 4sqmm Cable Country of Manufacture China Warranty 5 Years Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£168.99

160W Monocrystalline Solar Panel With 5M Cable

This waterproof, affordable, high efficiency Photonic Universe 160W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity to charge a 12V battery to power hundreds of devices and electrical appliances.The long-lasting monocrystalline solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.The panel comes with 5m of special solar cable which can operate at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of the cable for easy connection to other solar panels, extension leads or your existing system (MC4 connectors can also be cut off when wiring to screw terminals of a solar charge controller).Each individual solar panel is thoroughly tested to the highest quality standards, and labelled with a unique serial number for further quality control and increased warranty protection.Several of these panels may be connected in parallel or series to generate extra power for your needs.If you are planning to use this solar panel to charge a 12V battery or battery bank: please note this panel requires a solar charge controller / regulator to charge a 12V battery. To view the full range of solar charge controllers we offer, please visit the Solar Charge Controllers category of our online shop.Solar panel specifications:Peak power: 160WMaximum power voltage: 18.8VMaximum power current: 8.48AOpen circuit voltage: 22.9VShort circuit current: 9.02APower allowance range: 0~+3%Dimensions: 1480 x 670 x 35 mmWeight: 12 kg4 mounting holes5m of special cable with MC4 connectors attached This product is covered by a 1 year workmanship warranty provided by Photonic Universe. We will repair or replace defective items at our discretion. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.

£159.99

Victron Energy BlueSolar MPPT 150/35 – SCC020035000

Victron Energy BlueSolar MPPT 150/35 – SCC020035000 This Victron 150V 35A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 35A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 150-35 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36* /48V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Max solar panel voltage: 150V- Max solar panel power: 500W (12V) / 1000W (24V) / 1500W (36V) / 2000W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -64mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 20mA (12V) / 15mA (24V) / 10mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 130 x 186 x 70 mm- Mounting dimensions: 176 x 71.5 mm- Weight: 1.25kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£499.99

440W MCS certified semi-flexible solar panel top junction box

The FMCS-440M is a cutting-edge 440W MCS-certified semi-flexible monocrystalline solar panel that redefines efficiency and adaptability. Built with 182mm silicon wafers, PERC technology, and half-cut cells, this panel maximises power output while reducing energy losses. Its innovative design ensures exceptional durability, lightweight construction, and superior performance, even in challenging conditions. Perfect for curved rooftops, weak load-bearing surfaces, and corrugated metal roofs, the FMCS-440M is the ideal solution for residential, commercial, and industrial solar applications. Advanced energy efficiency With an advanced combination of PERC and half-cut cell technology, the FMCS-440M achieves superior energy conversion efficiency, ensuring maximum power output from every module. By minimising adaptive losses, this panel optimises energy generation, making it a high-performance choice for solar installations in various environments. Exceptional power-to-weight ratio & versatile installation Designed for ease of installation and adaptability, the FMCS-440M is exceptionally lightweight at just 4.1kg per unit area, making it 70% lighter than conventional solar panels. Despite its ultra-lightweight construction, it delivers an impressive 200W per square meter of installation area, making it ideal for surfaces with low load-bearing capacity, such as corrugated metal roofs, coal sheds, and curved rooftops. Enhanced performance in shaded conditions with integrated junction box diodes The FMCS-440M features a junction box equipped with three bypass diodes, ensuring optimal performance and reliability in various conditions. The integrated diodes mitigate the risk of hot spots caused by shaded or damaged cells, protecting the panel from potential long-term damage. By allowing the panel to continue generating electricity efficiently, even when partially shaded, the diodes enhance total energy production. In scenarios where only a portion of the panel is shaded, the bypass diodes help maintain consistent power flow, preventing significant energy loss. By reducing thermal stress and preventing excessive heat build-up, the diodes contribute to extending the overall durability and lifespan of the panel. When connected in series, the bypass diodes ensure that shading on one panel does not significantly impact the performance of the entire solar array. Built for extreme durability MCS certification guarantees that this solar panel is designed for durability. It has undergone rigorous weather testing and is built to withstand harsh environmental conditions. The panel is resistant to sand, dust, acid, alkali, and salt mist corrosion, making it suitable for installations in extreme climates. Additionally, its anti-PID (Potential Induced Degradation) and hail shock resistance further enhance its longevity and reliability. Long-term reliability & warranty protection For long-term peace of mind, the FMCS-440M comes with a 5-year quality and performance guarantee for vehicle/boat installations and 10-year for roof installations, along with a 25-year linear power output warranty, ensuring reliable and efficient energy generation for decades. The FMCS-440M semi-flexible solar panel is the perfect combination of innovation and efficiency, offering superior performance in any environment. Whether for residential, commercial, or industrial applications, this high-efficiency panel provides a reliable, sustainable energy solution for years to come. Solar panel specifications: Peak power: 440W Maximum power voltage: 34.48V Maximum power current: 12.77A Open circuit voltage: 41.73V Short circuit current: 13.76A Protection: IP68 Dimensions: 1940 x 1137 x 3.4 mm Weight: 9.0 kg 2 x 0.3m of 4.0m² solar cable attached This product is covered by a 5 year workmanship warranty for vehicle/boat installations and a 10 year warranty for roof installations

...Read more View Product

£545.00

270w Black Flexible Durable ETFE Solar Panel Kit with Victron SmartSolar MPPT 100/20

270w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/20 - (These kits are perfect for pop top roofs VW T6/T5/T4). Cable exits underneath the panel for a super-neat installation. This 270w Flexible Durable ETFE Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and efficient charging of your battery. The ETFE material of the solar panel makes it extremely durable and resistant to extreme weather conditions. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 270w Flexible Durable Solar Panel with ETFE Coating Dimensions: 1900 x 710mm Victron Energy SmartSolar MPPT 100/20 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 3m of dual core cable 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 3 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar Panel Specifications: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 5kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 270W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 270W Maximum power voltage: 24.2V Maximum power current: 11.16A Open circuit voltage: 28.6V Short circuit current: 11.83A Dimensions: 1900 x 710 x 2 mm Weight: 5.00 kg MPPT Specifications The Victron 100V 20A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent battery life function.Ultrafast MPPT Technology:This 20A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high-speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 100/20 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£328.99

150W Semi-Flexible Fibreglass Solar Panel With Durable Etfe Coating

150W Semi-Flexible Fibreglass Solar Panel With Durable Etfe Coating - 3 Year Warranty At Van Junkies we love high-quality solar products. That's why we have developed this highly durable semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This high-efficiency 150W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and backup solar power systems. The panel can also be used to provide a direct power supply for applications not sensitive to changes in input voltage/current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 2.85kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 150W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High-quality 9-busbar solar cells: This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross-section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 150W Maximum power voltage: 19.8V Maximum power current: 7.58A Open circuit voltage: 23.4V Short circuit current: 8.03A Dimensions: 1110 x 710 x 2 mm Weight: 2.85 kg This product comes with a 3 year workmanship warranty which covers material and production defects

...Read more View Product

£494.99

Victron 185W Mono Solar panel kit with SmartSolar MPPT, AGM Battery & Accessories

185W Victron Energy Solar Panel Kit with 100ah AGM Battery and all Accessories Panel sizes are 1485x668x30mm This 185w Solar Panel Kit with 95ah AGM Battery and accessories is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit Including: Victron 185W Monocrystalline panelPlastic corner fixing brackets or Aluminium Z BracketsCable entry Gland, Victron SmartSolar Bluetooth enabled 75/15 MPPT5m of Black PV Cable & MC4 Connectors x 2Resettable Circuit BreakerFused Battery Cable100ah AGM BatteryVictron Battery Isolator Switch This highly efficient Victron solar 185w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging of the battery. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£107.77

Victron Polycrystalline panel 115W-12V Poly 1030x668x30mm series 4b SPP041151202

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

£91.36

Victron Monocrystalline panel 90W-12V Mono 780x668x30mm series 4a SPM040901200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£586.99

200w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15

200w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4) Panel junction box is located at the top rear of the panel - Highly efficient Black German Cells This 200w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 200w Semi-Flexible Durable Black Solar Panel 1420 x 710 x 2 mm Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 2 year warranty on the Solar Panel 5 year warranty on Victron MPPT Double Entry Roof Gland - Black or White Panel Specifications Peak power: 200W Maximum power voltage: 17.6V Maximum power current: 11.36A Open circuit voltage: 20.8V Short circuit current: 12.05A Dimensions: 1420 x 710 x 3 mm Weight: 3.65 kg

...Read more View Product

£219.99

100W Reinforced Narrow Semi-Flexible Solar Panel With Durable ETFE Coating

At Van Junkies we love high quality solar products. That's why we have developed this highly durable semi-flexible solar panel reinforced with anodised aluminium and a strong ETFE surface and made from monocrystalline solar cells. This high-efficiency 100W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and backup solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage/current (e.g. electric motors or pumps) and for various grid-tie applications. Aluminium reinforcement and strong ETFE coating: This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market. In addition to the aluminium reinforcement, the surface of this 100W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High quality 5-busbar solar cells: This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. Other benefits: Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws) Unique narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 51cm wide) The panel is incredibly light (only 3kg) which is great for all vehicles High resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts. Sealed waterproof design ensures the panel can be used in all weather conditions. Solar panel specifications: Peak power: 100W Maximum power voltage: 18.2V Maximum power current: 5.49A Open circuit voltage: 21.4V Short circuit current: 5.82A Power allowance range: +/- 5% Solar Panel Dimensions: 1060 x 510 x 4 mm Weight: 3.15 kg 2 x 1m of high quality single core solar cable (4mm² cross section) Male and female MC4 connectors

£369.99

200W Reinforced Semi-Flexible Solar Panel With A Durable Etfe Coating

At Van Junkies we love high quality solar products. That's why we have developed this highly durable semi-flexible solar panel reinforced with anodised aluminium and a strong ETFE surface and made from monocrystalline solar cells. This high efficiency 200W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Aluminium reinforcement and strong ETFE coating: This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market. In addition to the aluminium reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 5-busbar solar cells: This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. Other benefits: Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws) The panel is fairly light (only 5.75kg) which is great for all vehicles High resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts Sealed waterproof design ensures the panel can be used in all weather conditions The panel is fitted with 2 x 0.9m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 200W Maximum power voltage: 19.8V Maximum power current: 10.10A Open circuit voltage: 23.4V Short circuit current: 10.71A Power allowance range: +/- 5% Solar Panel Dimensions: 1530 x 680 x 4 mm Weight: 5.75 kg 2 x 0.9m of high quality single core solar cable (4mm² cross section) Male and female MC4 connectors

£119.95

High Efficiency 30A Dual Battery Mppt Solar Charge Controller With Lcd Display For Solar Panels Up To 390W (12V Battery System) / 780W (24V Battery System)

Dual Battery ChargingThis advanced 30A 12V/24V dual battery solar controller uses advanced MPPT technology to charge two independent batteries or battery banks. The main battery is charged at high power, while a secondary battery is given a trickle charge of up to 1A. This makes it a perfect solar controller for a campervan, motorhome, boat or any other system with 2 batteries (e.g. engine and leisure battery). The main battery will be charged with a majority of the power, whilst the second battery will be trickle charged to keep it topped up and ready for use.Maximum Power Point Tracking (MPPT) TechnologyMPPT technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined solar input power allowed for this controller is 390W for a 12V battery system or 780W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full Range of Protection Functions:This charge controller features a comprehensive set of electronic protection functions to prevent reverse current at night (from the battery back to the solar panel), over-charging, short circuit, reverse polarity and more. The solar controller case is water resistant to a rating of IP33 when installed, for protection against sprays of water at up to 60 degrees from vertical.Advanced Battery Compatibility:Unlike many other less advanced solar charge controllers, this model is 100% compatible with a broad range of battery types for the main battery, such as Gel, AGM, Lead-Acid Flooded, and Lithium (LiFePO4 or Li-NiCoMn) batteries.Advanced System Functionality:The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel, system voltage recognition based on secondary battery)Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for the solar panel and each battery), battery state of charge, and accumulated charging energyEasy to use buttons allow the user to manually select the battery type (sealed, flooded, gel or Lithium), change the temperature units, and reset the in-built counters (charging energy, min/max voltages)When not in use, the system automatically goes into a low power mode, reducing standby consumption when there is no solar power available, such as when the vehicle is parked in a garageCurrent limiting function (30A) allows the possibility of adding more solar panels to your solar system in the future This model is also compatible with a remote meter MT11 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings from an easy to use and install remote screen.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely. This allows the system to optimise the charging process for lead acid batteries or provide low temperature protection for lithium batteries. Controller specifications: The most advanced MPPT technology to ensure high efficiency (>95%) of your solar system Fully automated operation and auto 12/24V selection 3 pairs of terminals (solar panel, battery 1, battery 2) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 390W (12V) / 780W (24V) Temperature sensor for automatic compensation (-3mV/°C/2V) Comprehensive electronic protection features Communication port: RS485 interface Grounding: negative common ground Current limiting function (30A) Self-consumption: <26mA Working temperature: -30°C to +80°C Size: 243.7 x 158 x 63 mm Mounting dimensions: 180 x 156 mm Weight: 1.4 kg Multiple mounting holes (5mm diameter) for ease of installation

£173.99

80W Reinforced Semi-Flexible Solar Panel With A Durable Etfe Coating (German Solar Cells)

This high efficiency 80W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 80W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 3.10kg) which is great for all vehiclesHigh resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts.Sealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 0.9m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system, for linking several panels together or for connecting 4mm extension cable. Solar panel specifications: Peak power: 80W Maximum power voltage: 20.2V Maximum power current: 3.96A Open circuit voltage: 23.9V Short circuit current: 4.2A Power allowance range: +/- 5% Solar Panel Dimensions: 730 x 665 x 4 mm Junction Box Dimensions: 90 x 16 x 16 mm Weight: 3.10 kg 2 x 0.9m of high quality single core solar cable (4mm² cross section) Male and female MC4 connectors

...Read more View Product

£48.27

Victron Monocrystalline panel 40W-12V Mono 425x668x25mm series 4a SPM040401200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£488.99

Victron 345W Monocrystalline Solar kit with SmartSolar 100/30 MPPT, Cables & MC4s

345W Victron Energy Mono Solar Panel Kit - Perfect for Campervans, Motorhomes & Boats Panel sizes are 1030x668x30mm This 345w Large Solar Panel Kit is designed for off-grid, campervans, motorhomes, and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes, and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit with Victron 3 * 115W Monocrystalline panels, 3 * fixing brackets (optional) , Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/30 MPPT charge controller, 5m of Black PV Extension Cable s(x2) with MC4 Connectors, 1 x Resettable Circuit Breaker, 1 x MPPT to Battery Cable set with in-line fuse. Mounts available (optional): 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets This highly efficient Victron solar 345w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds, and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Wiring guide for Solar Panel Kits in Series

£304.99

165W ETFE Semi Flexible Solar Panel 1500 x 660 x 2mm OS165-20MFX

The 165W semi flexible solar panel is ideal for campervans, motorhomes, caravans, van conversions, and marine craft. This 2nd generation panel offers improved efficiency, durability, and an attractive all-black finish. It is easy to install with no need for external cable joints, making it a convenient choice. Enjoy reliable performance and peace of mind with a 2-year warranty. Fully waterproof and light weight design at just 3.2kg Low profile with a thickness of just 2mm Semi-flexible with up to 30° flexibility Attractive black finish with 1.5 metre cable High efficiency levels 2 year warranty

£855.99

380W Mono Solar panel kit with SmartSolar MPPT, AGM Batteries & Accessories

380W Victron Energy Solar Panel Kit with 200ah AGM Batteries and all Accessories Panel sizes are 1485x668x30mm This large 380w Rigid Solar Panel Kit with 190ah AGM Batteries and all accessories is designed for off-grid, campervans, motorhomes, and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and battery charging efficiency. The ETFE covering makes the solar panel extremely durable and resistant. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit Including: Victron 190W Monocrystalline panels x 2Plastic corner fixing brackets x2 or Aluminium Z Brackets x 8Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/20 MPPT5m of Black PV Cable & MC4 Connectors x2Resettable Circuit Breaker 50ampFused Battery Cable100ah AGM Battery x 2Victron Battery Isolator Switch25mm Battery cable 2m (Red & Black) x 2 This highly efficient Victron solar 370w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging of the battery. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£1,020.99

360w Pro Flexible Solar Panel Kit with Victron SmartSolar MPPT 100|30

360w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/30 - (These kits are perfect for pop top roofs) Highly efficient German Cells with a Durable ETFE Coating Our flexible solar panel complete kit is suitable for many vehicle types, boats, and off-grid applications. Kit Contents 360w Semi-Flexible Durable Pro Solar Panel 2035 x 1020 x 2 mm Victron Energy SmartSolar MPPT 100/30 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) Double entry Roof Gland (Black or white) 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 2 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar Panel Specifications: This high efficiency, waterproof 360W semi-flexible solar panel is the largest semi-flexible solar panel available on the UK market. It is perfect for permanent outdoor use to provide free electricity for charging 12V or 24V batteries to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners or even zipping.Product features:Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditionsRobust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel that can be walked onIncredibly light (only 6.82kg) and very thin (just 2mm) which is great for motorhome and caravan roofsHigh resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified.The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter).The fibreglass plastic used in this solar panel is very strong and durable. When the solar panel is mounted on to a rigid surface, it is possible to walk on the solar panel in soft shoes (to prevent accidental scratches), which makes it the perfect choice for mounting on a boat deck.The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 connectors which can be used for easy connectivity to your existing system, linking several panels together or for connecting 4mm extension cable. Solar panel specifications: Peak power: 360W Maximum power voltage: 39.1V Maximum power current: 9A Open circuit voltage: 47.7V Short circuit current: 9.0A Dimensions: 2035 x 1020 x 2 mm Weight: 6.82 kg MPPT Specifications This Victron 100V 30A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device.Ultrafast MPPT Technology:This 30A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse current, PV reverse polarity and battery reverse polarity. The internal temperature sensor also protects the battery from overheating and will activate power derating if excessive temperatures are detected. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery, as well as 30 day performance data. The user can also specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 100/30 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Inbuilt bluetooth- Max solar panel voltage: 100V- Max solar panel power: 440W (12V) / 880W (24V)- Temperature sensor for automatic compensation (-16mV °C resp. -32mV °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 10mA- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 186 x 130 x 70 mm- Mounting dimensions: 175 x 75 mm- Weight: 1.3kg- 4 x mounting holes for ease of installation Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£79.99

High Efficiency 10A Dual Battery Mppt Solar Charge Controller With Lcd Display For Solar Panels Up To 130W (12V Battery System) / 260W (24V Battery System)

Dual Battery ChargingThis advanced 10A 12V/24V dual battery solar controller uses advanced MPPT technology to charge two independent batteries or battery banks. The main battery is charged at high power, while a secondary battery is given a trickle charge of up to 1A. This makes it a perfect solar controller for a campervan, motorhome, boat or any other system with 2 batteries (e.g. engine and leisure battery). The main battery will be charged with a majority of the power, whilst the second battery will be trickle charged to keep it topped up and ready for use.Maximum Power Point Tracking (MPPT) TechnologyMPPT technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 60V. The maximum combined solar input power allowed for this controller is 130W for a 12V battery system or 260W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full Range of Protection Functions:This charge controller features a comprehensive set of electronic protection functions to prevent reverse current at night (from the battery back to the solar panel), over-charging, short circuit, reverse polarity and more. The solar controller case is water resistant to a rating of IP33 when installed, for protection against sprays of water at up to 60 degrees from vertical.Advanced Battery Compatibility:Unlike many other less advanced solar charge controllers, this model is 100% compatible with a broad range of battery types for the main battery, such as Gel, AGM, Lead-Acid Flooded, and Lithium (LiFePO4 or Li-NiCoMn) batteries.Advanced System Functionality:• The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel, system voltage recognition based on secondary battery)• Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for the solar panel and each battery), battery state of charge, and accumulated charging energy• Easy to use buttons allow the user to manually select the battery type (sealed, flooded, gel or Lithium), change the temperature units, and reset the in-built counters (charging energy, min/max voltages)• When not in use, the system automatically goes into a low power mode, reducing standby consumption when there is no solar power available, such as when the vehicle is parked in a garage• Current limiting function (10A) allows the possibility of adding more solar panels to your solar system in the future This model is also compatible with a remote meter MT11 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings from an easy to use and install remote screen.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely. This allows the system to optimise the charging process for lead acid batteries or provide low temperature protection for lithium batteries. Controller specifications: The most advanced MPPT technology to ensure high efficiency (>95%) of your solar system Fully automated operation and auto 12/24V selection 3 pairs of terminals (solar panel, battery 1, battery 2) for wires up to 4mm2 Maximum solar panel voltage 60V Maximum solar panel power 130W (12V) / 260W (24V) Temperature sensor for automatic compensation (-3mV/°C/2V) Comprehensive electronic protection features Communication port: RS485 interface Grounding: negative common ground Current limiting function (10A) Self-consumption: <12mA Working temperature: -30°C to +80°C Size: 227.2 x 143 x 58.1 mm Mounting dimensions: 160 x 134 mm Weight: 0.8 kg Multiple mounting holes (5mm diameter) for ease of installation

...Read more View Product

£309.99

160W Reinforced Semi-Flexible Solar Panel With A Durable Etfe Coating (German Solar Cells)

We love high quality solar products. That's why we have developed this highly durable semi-flexible solar panel reinforced with anodised aluminium and a strong ETFE surface and made from German monocrystalline solar cells. This high efficiency 160W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 160W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 5.75kg) which is great for all vehiclesHigh resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts.Sealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system, for linking several panels together or for connecting 4mm extension cable. Solar panel specifications: Peak power: 160W Maximum power voltage: 20.2V Maximum power current: 7.92A Open circuit voltage: 23.9V Short circuit current: 8.40A Power allowance range: +/- 5% Solar Panel Dimensions: 1365 x 665 x 4 mm Junction Box Dimensions: 90 x 16 x 16 mm Weight: 5.75 kg 2 x 1m of high quality single core solar cable (4mm² cross section) Male and female MC4 connectors

£193.00

80W Reinforced Narrow Semi-Flexible Solar Panel With A Durable Etfe Coating (German Solar Cells)

At Photonic Universe we love high quality solar products. That's why we have developed this highly durable semi-flexible solar panel reinforced with anodised aluminium and a strong ETFE surface and made from German monocrystalline solar cells. This high efficiency 80W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 80W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)Unique narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 35cm wide)The panel is incredibly light (only 3.05kg) which is great for all vehiclesHigh resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts.Sealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system, for linking several panels together or for connecting 4mm extension cable. Solar panel specifications: Peak power: 80W Maximum power voltage: 20.2V Maximum power current: 3.96A Open circuit voltage: 23.9V Short circuit current: 4.20A Power allowance range: +/- 5% Solar Panel Dimensions: 1365 x 350 x 4 mm Junction Box Dimensions: 90 x 16 x 16 mm Weight: 3.05 kg 2 x 1m of high quality single core solar cable (4mm² cross section) Male and female MC4 connectors

£159.00

100W 12V Solar Panel With 5M Cable (German Solar Cells)

We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This high efficiency, waterproof 100W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system or 4mm extension cable. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller.The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.If you are planning to use this solar panel to charge a 12V battery or battery bank: please note this panel requires a solar charge controller / regulator to charge a 12V battery. To view the full range of solar charge controllers we offer, please visit the Solar Charge Controllers category of our online shop. Solar panel specifications: Peak power: 100W Maximum power voltage: 20.2V Maximum power current: 4.95A Open circuit voltage: 23.9V Short circuit current: 5.26A Power allowance range: +/- 3% Dimensions: 845 x 670 x 30mm Weight: 7kg 4 mounting holes 9 x 11 mm 2 x 5m of high quality single core solar cable 4.0mm cross section Male and female MC4 connectors

...Read more View Product

£109.99

30W black ultra-narrow semi-flexible fibreglass solar panel with durable ETFE coating

This high efficiency 30W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Unique ultra-narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 200mm wide) Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) Black backing makes the solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces The panel is incredibly light (only 0.63kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 30W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 5-busbar solar cells: This panel also features new generation 5-busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. All-black design: This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (2.5mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system, for linking several panels together Solar panel specifications: Peak power: 30W Maximum power voltage: 18.2V Maximum power current: 1.65A Open circuit voltage: 21.3V Short circuit current: 1.73A Dimensions: 970 x 200 x 3 mm Weight: 0.63 kg This product comes with a 3 year workmanship warranty

£549.99

530W MCS certified semi-flexible solar panel top junction box

The FMCS-530M is a cutting-edge 530W MCS-certified semi-flexible monocrystalline solar panel that redefines efficiency and adaptability. Built with 182mm silicon wafers, PERC technology, and half-cut cells, this panel maximises power output while reducing energy losses. Its innovative design ensures exceptional durability, lightweight construction, and superior performance, even in challenging conditions. Perfect for curved rooftops, weak load-bearing surfaces, and corrugated metal roofs, the FMCS-530M is the ideal solution for residential, commercial, and industrial solar applications. Advanced energy efficiency With an advanced combination of PERC and half-cut cell technology, the FMCS-530M achieves superior energy conversion efficiency, ensuring maximum power output from every module. By minimising adaptive losses, this panel optimises energy generation, making it a high-performance choice for solar installations in various environments. Exceptional power-to-weight ratio & versatile installation Designed for ease of installation and adaptability, the FMCS-530M is exceptionally lightweight at just 4.1kg per unit area, making it 70% lighter than conventional solar panels. Despite its ultra-lightweight construction, it delivers an impressive 200W per square meter of installation area, making it ideal for surfaces with low load-bearing capacity, such as corrugated metal roofs, coal sheds, and curved rooftops. Enhanced performance in shaded conditions with integrated junction box diodes The FMCS-530M features a junction box equipped with three bypass diodes, ensuring optimal performance and reliability in various conditions. The integrated diodes mitigate the risk of hot spots caused by shaded or damaged cells, protecting the panel from potential long-term damage. By allowing the panel to continue generating electricity efficiently, even when partially shaded, the diodes enhance total energy production. In scenarios where only a portion of the panel is shaded, the bypass diodes help maintain consistent power flow, preventing significant energy loss. By reducing thermal stress and preventing excessive heat build-up, the diodes contribute to extending the overall durability and lifespan of the panel. When connected in series, the bypass diodes ensure that shading on one panel does not significantly impact the performance of the entire solar array. Built for extreme durability MCS certification guarantees that this solar panel is designed for durability. It has undergone rigorous weather testing and is built to withstand harsh environmental conditions. The panel is resistant to sand, dust, acid, alkali, and salt mist corrosion, making it suitable for installations in extreme climates. Additionally, its anti-PID (Potential Induced Degradation) and hail shock resistance further enhance its longevity and reliability. Long-term reliability & warranty protection For long-term peace of mind, the FMCS-530M comes with a 5-year quality and performance guarantee for vehicle/boat installations and 10-year for roof installations, along with a 25-year linear power output warranty, ensuring reliable and efficient energy generation for decades. The FMCS-530M semi-flexible solar panel is the perfect combination of innovation and efficiency, offering superior performance in any environment. Whether for residential, commercial, or industrial applications, this high-efficiency panel provides a reliable, sustainable energy solution for years to come. Solar panel specifications: Peak power: 530W Maximum power voltage: 41.35V Maximum power current: 12.83A Open circuit voltage: 49.90V Short circuit current: 13.76A Protection: IP68 Dimensions: 2312 x 1137 x 3.4 mm Weight: 10.5 kg 2 x 0.3m of 4.0m² solar cable attached This product is covered by a 5 year workmanship warranty for vehicle/boat installations and a 10 year warranty for roof installations

...Read more View Product

£556.99

200w Slimedge Lightweight Solar Panel Kit with Victron SmartSolar MPPT 75/15

200w Slimedge Lightweight Solar Panel Kit with Victron SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs) 10 YEAR PANEL WARRANTY! This 200w Lightweight Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 200w Ultra Lightweight Rigid Black Solar Panel 1513 x 807 x 12 mm Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive 1 x MPPT to Battery Cable set with In-Line Fuse 10 year warranty on the Solar Panel 5 year warranty on Victron MPPT Scanstrut Roof Gland - Black Panel Specifications Peak power: 200W Open circuit voltage: 28.5V Dimensions: 1513mm x 807mm x 12 mm Weight: 3.65 kg SlimEdge panels are a gamechanger, they come with all the benefits of a rigid panel and the lightweight construction of a flexible panel, making them perfect for pop tops. Shingled Monocrystalline Cells - Convert more sunlight into electricity, with a design that maximises surface area - perfect for tight spaces like caravans and campers. Discreet Inbuilt Fixing Brackets - Quick, easy installation with a sleek, low-profile design. It also helps reduce vehicle height for a cleaner, more aerodynamic look. Up to 50% Lighter Than Traditional Rigid Panels - Improved Fuel Economy - Lighter weight helps reduce fuel costs. Sturdy Anodised Aluminium Frame - Sleek, Modern Appearance: Adds a stylish edge to your setup. Durability & Corrosion Resistance: Built to withstand even the toughest outdoor conditions. Easy Installation: A rigid frame ensures the panel is easy to mount with no flexing. 10-Year Panel Warranty - Enjoy peace of mind knowing your panel is protected against premature failure, and offers long-lasting reliability.

...Read more View Product

£1,226.39

Victron 1110w Monocrystalline Solar kit with SmartSolar 250/60 MPPT, Mounts, Cables & MC4s

1110W Victron Energy Mono Solar Panel Kit - Perfect for Campervans, Motorhomes, Boats & Narrowboats 6 x 185w Panels, sizes are 1485x668x30mm This kit is designed for the panels to be joined in series, mounts are optional. This 1Kw+ Large Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 250/60 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 10m black extension leads Full Kit with Victron 6 * 185W Monocrystalline panels, OPTIONAL 6 * plastic corner fixing bracket sets or 6 * Aluminium Solar Bracket sets, Cable entry Gland, Victron SmartSolar Bluetooth enabled 250/60 MPPT charge controller, 10m of Black PV Extension Cable s(x2) with MC4 Connectors, Mounts available (optional): 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets This highly efficient Victron solar 1110w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Wiring guide for Solar Panel Kits in Series

...Read more View Product

£363.99

Victron 150W Monocrystalline Solar panel kit with BlueSolar MPPT, Mounts, Cables & MC4

150W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats Panel sizes are 112 x 67 x 3.5 cm This 150w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron BlueSolar MPPT 75/10 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit with Victron 150W Monocrystalline panel, plastic or alumminum mounting brackets, Cable entry Gland, Victron BlueSolar 75/10 MPPT charge controller, 10m of Black PV Cable & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cables with In-Line Fuse. Mounts available: 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets Ideal for charging battery banks up to 250ah This highly efficient Victron solar 150w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£389.99

200W Black Semi-Flexible Fiberglass Solar Panel with Durable ETFE Coating

200W Black Semi-Flexible Fiberglass Solar Panel with Durable ETFE Coating - 3 Year Warranty At Van Junkies we love high-quality solar products. That's why we have developed this highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This high-efficiency 200W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and backup solar power systems. The panel can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Specially textured surface significantly reduces light reflection and improves performance in low-light and cloudy conditions The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) Black backing makes the solar panel ideal for discreet and aesthetically pleasing installation on dark-coloured roofs, vehicles or mounting surfaces The panel is incredibly light (only 3.65kg) and very thin (just 2mm) which is great for all vehicles High resistance to saltwater environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High quality 9-busbar solar cells: This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. All-black design: This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark-coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (6mm² cross-section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 200W Maximum power voltage: 17.6V Maximum power current: 11.36A Open circuit voltage: 20.8V Short circuit current: 12.05A Dimensions: 1420 x 710 x 2 mm Weight: 3.65 kg

...Read more View Product

£744.00

330W Pro Semi-Flexible Solar Panel with 5-Year Warranty

Now with a 5 year warranty! This high efficiency, waterproof 330W semi-flexible solar panel is the largest semi-flexible solar panel available on the UK market. It is perfect for permanent outdoor use to provide free electricity for charging 12V or 24V batteries to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners or even zipping.Product features:Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditionsRobust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel that can be walked onIncredibly light (only 6.82kg) and very thin (just 2mm) which is great for motorhome and caravan roofsHigh resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified. The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter).The fibreglass plastic used in this solar panel is very strong and durable. When the solar panel is mounted on to a rigid surface, it is possible to walk on the solar panel in soft shoes (to prevent accidental scratches), which makes it the perfect choice for mounting on a boat deck. The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 connectors which can be used for easy connectivity to your existing system, linking several panels together or for connecting 4mm extension cable. Solar panel specifications: Peak power: 330W Maximum power voltage: 39.1V Maximum power current: 8A Open circuit voltage: 47.7V Short circuit current: 9.0A Dimensions: 1917 x 1020 x 2 mm Weight: 6.82 kg

...Read more View Product

£604.99

330w Premium Large Solar Panel Kit with Victron Smartsolar MPPT

330w Premium Large Solar Panel Kit with Victron Smartsolar MPPT perfect for Campervan Off-Grid Living This large 330w Rigid Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and battery charging efficiency. The ETFE covering makes the solar panel extremely durable and resistant. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. 330w Premium Solar panel kit including: Sharp NU-JC Monocrystalline Panel - Dimensions - 1684 x 1002 x 40mmVictron 100/30 Smartsolar MPPT Solar Charge Controller2 x black 5m 6mm PV Solar Cable with MC4 Connectors7 Piece ABS Plastic Solar Panel Mount Kit with Double Entry Roof Gland or Z-Brackets1 x Ressetable Circuit Breaker1 x MPPT to Battery cable set with in-line fuse. This MCS-certified panel is perfect for a wide variety of applications, from grid-tie household systems to off-grid installations where mains power is limited or unavailable such as boats, caravans, campervans, cabins or glamping huts. These high-power panels are ideal for large systems where the time and expense of fitting a high-wattage array needs to be minimised. High-efficiency solar cells use PERC technology with 5 busbars to extract more power from a smaller surface area, increasing the output of the panel without increasing the size. Half-cut cell construction decreases internal losses, reduces risk of hotspots and improves performance in shaded conditions. The robust design of the panel is IP68 (waterproof) rated, and tested for resistance against PID, salt mist, ammonia, heavy snow, dust and sand. This thorough testing ensures a long service life even in harsh marine or wilderness conditions. A pair of male/female MC4 connectors are crimped on the end of the cable for easy waterproof connection to other solar panels, extension leads or your existing system. With a 15-year workmanship guarantee and 25-year output guarantee, you can be confident in the quality, durability and longevity of this premium solar panel. Features of the Victron SmartSolar MPPT 100/30: Feature highlights• Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetoothenabled device• Ultra-fast Maximum Power Point Tracking (MPPT)• Advanced Maximum Power Point Detection in case of partial shading conditions• Load output on the small models• Battery Life: intelligent battery management by load shedding• Automatic battery voltage recognition• Flexible charge algorithm• Over-temperature protection and power de-rating when temperature is high. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£404.99

Victron Energy SmartSolar MPPT 150V 85A Tr VE.Can – 150/85 SCC115085411

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC115085411 GTIN 8719076050339 Voltage 12/24/48V Rated Charge Current 85A Nominal PV Power, 12V 1200W Max. PV Short Circuit Current 70A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£349.99

Victron Energy SmartSolar MPPT 150V 70A Tr VE.Can – 150/70 SCC115070411

Victron Energy SmartSolar MPPT 150V 70A Tr VE.Can – 150/70 SCC115070411 The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC115070411 GTIN 8719076050322 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£378.99

160W 12V Reinforced Semi-Flexible Solar Charging Kit

This high efficiency semi-flexible 160W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:160W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)Advanced 20A solar charge controller with LCD display and powerful 2.4A dual USB outputA pair of 5m 4mm² single core solar extension cables with MC4 connectors5m of 4mm² dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminals 160W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 160W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 5.75kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 1m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.20A Solar charge controller:The kit includes a 20A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc.The LCD display shows information regarding real time solar panel and battery performance, including: voltage, current, battery state of charge, and battery temperature. An energy statistics counter also displays the accumulated daily and monthly charge values (useful for comparing solar panel performance between different periods).This solar charge controller also offers the rare and highly sought-after feature of a dual USB charging output. These 5V USB ports have a total combined output of 2.4A, offering fast and powerful charging of USB compatible devices such as mobile phones, tablets, mp3 players etc.An optional 12V load (e.g. 12V lighting / fans) may also be connected directly to the solar charge controller, with various settings for night time lighting applications. In addition, this controller also offers various charging programs for different battery types, which can be easily selected by the user. In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4mm² cross section) and 5m of 4mm² dual core battery cable fitted with a fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 160WMaximum power voltage: 20.2VMaximum power current: 7.92AOpen circuit voltage: 23.9VShort circuit current: 8.40APower allowance range: +/- 5%Solar Panel Dimensions: 1365 x 665 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 5.75 kg2 x 1m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Fully automated operation and auto 12/24V selectionRated charge/discharge current: 20AMaximum solar panel input power: 320W (12V) / 640W (24V)Maximum solar panel input voltage 50VTemperature sensor for automatic compensation: -3mV/C/2V (25C)Working temperature: -25ºC to +55ºCSelf-consumption: max. ≤9.2mA (12V); ≤11.7mA (24V)3 pairs of terminals (solar, battery, optional load)Terminals for wire up to 10mm2Multiple mounting holes for ease of installationSize: 16 x 9.5 x 5 cmWeight: 350 g Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The panel is covered by a 1 year repair or replacement warranty provided by Photonic Universe. In the unlikely event that a defect is found and confirmed during this period, we guarantee that we will repair or replace all defective items. The solar charge controller is covered by a 2 year manufacturer warranty. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.

£359.99

180W Black Reinforced Semi-Flexible Solar Panel With Round Rear Junction Box And 3M Cable, With Durable Etfe Coating (German Solar Cells)

We love high quality solar products. That's why we have developed this highly durable black semi-flexible solar panel reinforced with anodised aluminium and a strong ETFE surface and made from German monocrystalline solar cells. This model also features a rear-fitted circular junction box and 3m dual core cable. This high efficiency 180W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 180W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Simple, professional installation:This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface.This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 5.90kg) which is great for all vehiclesHigh resistance to salt water environment (junction box and cables underneath are protected from contact with water) and possibility to walk on the panel make it perfect for boats and yachtsSealed waterproof design ensures the panel can be used in all weather conditionsJunction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting.Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Solar panel specifications: Peak power: 180W Maximum power voltage: 20.2V Maximum power current: 8.91A Open circuit voltage: 23.9V Short circuit current: 9.44A Power allowance range: +/- 5% Solar Panel dimensions: 1470 x 665 x 4 mm Junction Box diameter: 30 mm Weight: 5.90 kg 1 x 3m high quality dual core solar cable attached (4mm cross section)

£98.99

50W 12V Solar Panel With 5M Cable (German Solar Cells)

We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This high efficiency, waterproof 50W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system or 2.5mm extension cable. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller.The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.If you are planning to use this solar panel to charge a 12V battery or battery bank: please note this panel requires a solar charge controller / regulator to charge a 12V battery. To view the full range of solar charge controllers we offer, please visit the Solar Charge Controllers category of our online shop. Solar panel specifications: Peak power: 50W Maximum power voltage: 20.2V Maximum power current: 2.48A Open circuit voltage: 23.9V Short circuit current: 2.63A Power allowance range: +/- 3% Dimensions: 590 x 505 x 25mm Weight: 4.2 kg 4 mounting holes 6 x 9 mm 2 x 5m of high quality single core solar cable 2.5mm cross section Male and female MC4 connectors attached

...Read more View Product

£179.00

Victron Energy BlueSolar MPPT Solar Charge Controller 150/45-Tr – SCC115045222

Victron Energy BlueSolar MPPT Solar Charge Controller 150/45-Tr – SCC115045222 The Victron 150V 45A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring. Ultrafast MPPT Technology: This 45A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array. Inbuilt safety protection: Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring: The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including: Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge. Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters. User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings. The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops. Other features: The Victron BlueSolar MPPT 150-45 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating. This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Specifications: - The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36 / 48V selection*- 2 pairs of terminals (solar panel, battery) for wires up to 35mm2- Max solar panel voltage: 150V- Max solar panel power: 600W (12V) / 1300W (24V) / 1950W (36V) / 2600W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -48mV / -64mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: <35mA (12V) / <20mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 185 x 250 x 95 mm- Mounting dimensions: 225 x 81 mm- Weight: 3kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£261.00

SUNPOWER 12v 110w Monocrystalline Semi Flexible Solar Panel SPR-E-Flex-110

SUNPOWER 12v 110w Monocrystalline Semi Flexible Panel: Easy and Low Cost Installation: You can install the Sunpower panels with adhesives and/or use of stainless steel grommets in the panel. The panels have standard quick connect cables. An easy-to-follow installation guide is also provided with each panel. Warranty: 5 years limited power warranty of 80% of the minimum specified power rating. Designed in the USA and assembled in France. SunPower® flexible panels are lightweight and portable, so you can take them on your next adventure. Plus, The Sunpower panels feature the highest-efficiency solar cells available which as a result means more power or faster charging times for solar compatible batteries. Designed for ToughnessThe SunPower Maxeon® Solar Cell is the only cell built on a solid copper foundation. As a result SunPower cells are resistant to power loss via cracking and corrosion, unlike conventional cells, which are much more likely to lose power when bent or subjected to a moist environment. SunPower flexible panels are the #1 choice for customers due to the combination of high power and cell ruggedness. Made with SunPower’s highest-efficiency Maxeon® solar cells, The SUNPOWER 12v 110w Monocrystalline Semi Flexible Panel delivers the most power and highest charging capacity in its product class. Sunpower manufacture their panels using a top-grade, lightweight polymer material, allowing for easy transport, installation, and flexibility up to 30 degrees. They come with MC4 male and female connectors that can connect easily to solar compatible devices. SUNPOWER 12v 110w Monocrystalline Semi Flexible Panel – SPR-E-Flex-110 Weight 2.0 kgPanel Dimensions 1165 x 556 x 20 mm with junction boxWarranty: 5 years limited power warranty of 80% of the minimum specified power rating.

£815.99

530W MCS certified black semi-flexible solar panel kit

530w MCS Certified Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/30 (5-year panel warranty) This 530w Flexible Durable MCS Certified Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and efficient charging of your battery. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 530w Flexible Durable Solar Panel with MCS Certification Dimensions: 2312 x 1137 x 3.4 mm Victron Energy SmartSolar MPPT 100/30 Sikaflex 522 Caravan / Motorhome Adhesive 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 5 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar panel specifications: Peak power: 530W Maximum power voltage: 41.35V Maximum power current: 12.83A Open circuit voltage: 49.90V Short circuit current: 13.76A Protection: IP68 Dimensions: 2312 x 1137 x 3.4 mm Weight: 10.5 kg 2 x 0.3m of 4.0m² solar cable attached The FMCS-530M is a cutting-edge 530W MCS-certified semi-flexible monocrystalline solar panel that redefines efficiency and adaptability. Built with 182mm silicon wafers, PERC technology, and half-cut cells, this panel maximises power output while reducing energy losses. Its innovative design ensures exceptional durability, lightweight construction, and superior performance, even in challenging conditions. Perfect for curved rooftops, weak load-bearing surfaces, and corrugated metal roofs, the FMCS-530M is the ideal solution for residential, commercial, and industrial solar applications.

...Read more View Product

£124.00

NDS Energy Sun Control 2 12V 360W MPPT With N-Bus - SCE360

SUNCONTROL2 is the latest and most innovative charge regulator from NDS. The MPPT technology allows to optimize the energy from any solar panel, performing the most modern charging curves, for batteries always charged and efficient over time. Solid and functional thanks to the professional terminal block and equipped with updated communication protocols LIN-BUS / CI-BUS, SUNCONTROL2 is ideal for an installation destined to last over time. Available in two different versions: SC320M with input for two panels up to 320W (without cooling fan) and SC350M which supports up to 350W. The charge regulator is the heart of the photovoltaic system, choosing suncontrol2 means making the most of all the potential of today and the future Main Features: Temperature Sensor Latest Generation Lin-Bus/Ci-Bus Communication Protocols Professional Terminal Block Recharge Starting Battery 5-Stages Charging Curves Desulphation System LED Charging Status Separate Input for Panel Nominal Voltage 12V Nominal Voltage Input 30A Maximum Charging Current 20A Module Max Power 320W MPPT System Yes Protection Fuse 30A Bluetooth No Dimensions L151 x W90 x D48mm Warranty 2 Years

£375.99

100w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15

100w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4) Highly efficient Black German Cells This 100w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller (with Bluetooth) ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications.. Kit Contents 100w Semi-Flexible Durable Black Solar Panel - dimensions: 840x 665 x 4 mm Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Red & Black) 2 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar Panel Specifications: Aluminum reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminum fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminum reinforcement, the surface of this 180W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Simple, professional installation:This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface.This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 5kg) which is great for all vehiclesHigh resistance to salt water environment (junction box and cables underneath are protected from contact with water) and possibility to walk on the panel make it perfect for boats and yachtsSealed waterproof design ensures the panel can be used in all weather conditionsJunction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting.Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Solar panel specifications: Peak power: 100W Maximum power voltage: 20.2V Maximum power current: 4.95A Open circuit voltage: 23.9V Short circuit current: 5.25A Power allowance range: +/- 5% Solar Panel dimensions: 840x 665 x 4 mm Junction Box diameter: 30 mm Weight: 3.60 kg 1 x 3m high quality dual core solar cable attached (4mm cross section) MPPT Specifications The Victron 75V 15A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£389.99

330W Sharp Nu-Jc Monocrystalline Solar Panel With High-Efficiency Perc Cells SRP-330M

Van Junkies are proud to present this high-quality 330W solar panel from leading solar manufacturer Sharp, who have over 60 years of experience with solar technology and over 50 million solar panels installed all over the world. This MCS certified panel is perfect for a wide variety of applications, from grid-tie household systems to off-grid installations where mains power is limited or unavailable such as boats, caravans, campervans, cabins or glamping huts. These high-power panels are ideal for large systems where the time and expense of fitting a high Wattage array needs to be minimised. High efficiency solar cells use PERC technology with 5 busbars to extract more power from a smaller surface area, increasing the output of the panel without increasing the size. Half-cut cell construction decreases internal losses, reduces risk of hotspots and improves performance in shaded conditions. The robust design of the panel is IP68 (waterproof) rated, and tested for resistance against PID, salt mist, ammonia, heavy snow, dust and sand. This thorough testing ensures a long service life even in harsh marine or wilderness conditions. A pair of male / female MC4 connectors are crimped on the end of the cable for easy waterproof connection to other solar panels, extension leads or your existing system. With a 15-year workmanship guarantee and 25-year output guarantee, you can be confident in the quality, durability and longevity of this premium solar panel. Specifications: Peak power: 330W Maximum power voltage: 34.27V Maximum power current: 9.63A Open circuit voltage: 41.32V Short circuit current: 10.35A Power tolerance: 0/+5% Dimensions: 1,684 x 1002 x 40 mm Weight: 19.5 kg Mounting holes for ease of installation 2x 1.2m of high-quality single core solar cable Male and female MC4 waterproof connectors The product is covered by a 15 year workmanship warranty provided by Sharp Electronics. In addition, solar cells are guaranteed to produce at least 97.5% of nominal power in the first year after purchase and less than 0.7% degradation of nominal power each year after until 25 years after purchase, for a minimim of 80.7%.

...Read more View Product

£29.49

10M Single Core Extension Cable 6.0Mm2 With Mc4 Connectors

This single core solar extension cable 6.0mm2 cross section has been specially designed for solar panels to carry high current and have negligible power loss. It comes with waterproof MC4 connectors ("male" on one end, "female" on the other) which can be easily connected to similar MC4-type connectors coming with most solar panels, including Photonic Universe solar panels. This cable is suitable for all weather conditions including cold and hot temperatures.

...Read more View Product

£308.99

150W Black Reinforced Narrow Semi-Flexible Solar Panel With A Durable Etfe Coating

At Van Junkies we love high quality solar products. That's why we have developed this highly durable black semi-flexible solar panel reinforced with anodised aluminium, a strong ETFE surface and made from monocrystalline solar cells. This high efficiency 150W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Aluminium reinforcement and strong ETFE coating: This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market. In addition to the aluminium reinforcement, the surface of this 150W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 5-busbar solar cells: This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures. All-black design: This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Other benefits: Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws) Unique narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 51cm wide) Black backing makes the solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces The panel is incredibly light (only 4.45kg) which is great for all vehicles High resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts Sealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 0.9m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 150W Maximum power voltage: 18.2V Maximum power current: 8.24A Open circuit voltage: 21.4V Short circuit current: 8.74A Power allowance range: +/- 5% Solar Panel Dimensions: 1550 x 510 x 4 mm Weight: 4.45 kg 2 x 0.9m of high quality single core solar cable (4mm² cross section) Male and female MC4 compatible connectors

£35.99

Remote Meter/Display Mt11 With 5M Cable For 10A-30A Dm Series Dual Battery Mppt Solar Charge Controllers

This high quality, brand new remote display / monitor can be used with 10A - 30A dual battery MPPT solar charge controllers/regulators (DM series). The unit displays important charging parameters such as:Battery and solar panel voltagesBattery and solar panel currentBattery state of chargeAccumulated charge and discharge energyMinimum/maximum recorded voltageTemperature (of the controller, or of the battery using an optional external temperature sensor) This meter allows you to change battery type and capacity, temperature unit, and track and reset the accumulated energy counter.CompatibilityThis meter is only compatible with DM series dual battery MPPT solar controllers:High efficiency 10A dual battery MPPT solar charge controller with LCD display for solar panels up to 130W (12V battery system) / 260W (24V battery system)High efficiency 20A dual battery MPPT solar charge controller with LCD display for solar panels up to 260W (12V battery system) / 520W (24V battery system)High efficiency 30A dual battery MPPT solar charge controller with LCD display for solar panels up to 390W (12V battery system) / 780W (24V battery system) If you already have one of our DM series dual battery MPPT solar controllers, this remote meter can easily be added at any time to your system - simply connect the cable supplied with the meter to the RS485 socket of the controller.The removable frame allows for either flush or surface mounting. Specifications: Suitable for 10A-30A dual battery MPPT solar charge controllers DM Series Self-consumption: 4-13 mA (depending on backlight) Operating temperature: -20C to +70C Cable: RS485, 5m included Size (without frame): 98.4 x 98.4 mm (with frame): 114 x 114 mm Weight: 110g

...Read more View Product

£175.99

120W 12V Solar Panel With 5M Cable (German Solar Cells)

We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This high efficiency, waterproof 120W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, your existing system or 4mm extension cable. The MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller.The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures that the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.If you are planning to use this solar panel to charge a 12V battery or battery bank: please note this panel requires a solar charge controller / regulator to charge a 12V battery. To view the full range of solar charge controllers we offer, please visit the Solar Charge Controllers category of our online shop. Solar panel specifications: Peak power: 120W Maximum power voltage: 20.2V Maximum power current: 5.94A Open circuit voltage: 23.9V Short circuit current: 6.31A Power allowance range: +/- 3% Dimensions: 100.5 x 67 x 3.5 cm Weight: 8.3 kg 4 mounting holes 9 x 14 mm 2 x 5m of high quality single core solar cable 4.0mm cross section Male and female MC4 connectors

...Read more View Product

£63.55

Victron Polycrystalline panel 60W-12V Poly 545x668x25mm series 4a SPP040601200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£164.99

Victron Monocrystalline panel 215W-24V Mono 1580x808x35mm series 4a SPM042152402

The Victron 215W Monocrystalline Solar Panel is the perfect addition to any off-grid application. They are pre-wired with MC4 connectors, making for easy installation. Their sturdy, anodized aluminium frame allows the solar panels to be easily roof-mounted with a variety of standard mounting systems. 215W solar panel Monocrystalline structure Perfect for boats and campervans Rigid construction GTIN 8719076040378 Voltage 24V Nominal Power 215W Cell Type Monocrystalline Number of Cells in Series 72 Maximum System Voltage 1000V Dimensions L1580 x W808 x D35mm Weight 15Kg Warranty 5 Years Country of Manufacture China

...Read more View Product

£289.99

130W black narrow semi-flexible fibreglass solar panel with durable ETFE coating

this highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This high efficiency 130W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Unique narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 505mm wide) Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) Black backing makes the solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces The panel is incredibly light (only 2.38kg) and very thin (just 3mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 130W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 9-busbar solar cells: This panel also features new generation 9-busbar solar cells, which are more efficient than the 2, 3, 4, or 5-busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. All-black design: This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 130W Maximum power voltage: 20.9V Maximum power current: 6.22A Open circuit voltage: 24.4V Short circuit current: 6.53A Dimensions: 1460 x 505 x 3 mm Weight: 2.38 kg This product comes with a 3 year workmanship warranty

...Read more View Product

£449.99

350W MCS certified semi-flexible solar panel top junction box

The FMCS-350M is a cutting-edge 350W MCS-certified semi-flexible monocrystalline solar panel that redefines efficiency and adaptability. Built with 182mm silicon wafers, PERC technology, and half-cut cells, this panel maximises power output while reducing energy losses. Its innovative design ensures exceptional durability, lightweight construction, and superior performance, even in challenging conditions. Perfect for curved rooftops, weak load-bearing surfaces, and corrugated metal roofs, the FMCS-350M is the ideal solution for residential, commercial, and industrial solar applications. Advanced energy efficiency With an advanced combination of PERC and half-cut cell technology, the FMCS-350M achieves superior energy conversion efficiency, ensuring maximum power output from every module. By minimising adaptive losses, this panel optimises energy generation, making it a high-performance choice for solar installations in various environments. Exceptional power-to-weight ratio & versatile installation Designed for ease of installation and adaptability, the FMCS-350M is exceptionally lightweight at just 4.1kg per unit area, making it 70% lighter than conventional solar panels. Despite its ultra-lightweight construction, it delivers an impressive 200W per square meter of installation area, making it ideal for surfaces with low load-bearing capacity, such as corrugated metal roofs, coal sheds, and curved rooftops. Enhanced performance in shaded conditions with integrated junction box diodes The FMCS-350M features a junction box equipped with three bypass diodes, ensuring optimal performance and reliability in various conditions. The integrated diodes mitigate the risk of hot spots caused by shaded or damaged cells, protecting the panel from potential long-term damage. By allowing the panel to continue generating electricity efficiently, even when partially shaded, the diodes enhance total energy production. In scenarios where only a portion of the panel is shaded, the bypass diodes help maintain consistent power flow, preventing significant energy loss. By reducing thermal stress and preventing excessive heat build-up, the diodes contribute to extending the overall durability and lifespan of the panel. When connected in series, the bypass diodes ensure that shading on one panel does not significantly impact the performance of the entire solar array. Built for extreme durability MCS certification guarantees that this solar panel is designed for durability. It has undergone rigorous weather testing and is built to withstand harsh environmental conditions. The panel is resistant to sand, dust, acid, alkali, and salt mist corrosion, making it suitable for installations in extreme climates. Additionally, its anti-PID (Potential Induced Degradation) and hail shock resistance further enhance its longevity and reliability. Long-term reliability & warranty protection For long-term peace of mind, the FMCS-350M comes with a 5-year quality and performance guarantee for vehicle/boat installations and 10-year for roof installations, along with a 25-year linear power output warranty, ensuring reliable and efficient energy generation for decades. The FMCS-350M semi-flexible solar panel is the perfect combination of innovation and efficiency, offering superior performance in any environment. Whether for residential, commercial, or industrial applications, this high-efficiency panel provides a reliable, sustainable energy solution for years to come. Solar panel specifications: Peak power: 350W Maximum power voltage: 27.47V Maximum power current: 12.75A Open circuit voltage: 33.17V Short circuit current: 13.70A Protection: IP68 Dimensions: 1571 x 1137 x 3.4 mm Weight: 7.4 kg 2 x 0.3m of 4.0m² solar cable attached This product is covered by a 5 year workmanship warranty for vehicle/boat installations and a 10 year warranty for roof installations

...Read more View Product

£618.99

Victron 520W Monocrystalline Solar kit with SmartSolar 150/35 MPPT, Mounts, Cables & MC4s

520W Victron Energy Mono Solar Panel Kit - Perfect for Campervans, Motorhomes & Boats Panel sizes are 1020x668x30mm This 520w Large Solar Panel Kit is designed for off-grid, campervans, motorhomes, and yachts/boats. The included Victron SmartSolar MPPT 150/35 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes, and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit with Victron 4 * 130W Monocrystalline panels, 4 * fixing brackets (optional) , Cable entry Gland, Victron SmartSolar Bluetooth enabled 150/35 MPPT charge controller, 5m of Black PV Extension Cable s(x2) with MC4 Connectors, 1 x Resettable Circuit Breaker, 1 x MPPT to Battery Cable set with in-line fuse. Mounts available (optional): 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets This highly efficient Victron solar 520w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds, and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Wiring guide for Solar Panel Kits in Series

...Read more View Product

£288.99

130W black narrow semi-flexible fibreglass solar panel with durable ETFE coating

This highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface is made from monocrystalline solar cells. This high efficiency 130W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Unique narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 505mm wide) Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) Black backing makes the solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces The panel is incredibly light (only 2.38kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 130W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 5-busbar solar cells: This panel also features new generation 5-busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. All-black design: This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 130W Maximum power voltage: 20.5V Maximum power current: 6.35A Open circuit voltage: 24.0V Short circuit current: 6.66A Dimensions: 1460 x 505 x 2 mm Weight: 2.38 kg

£308.99

150W Black Narrow Semi-flexible Fibreglass Solar Panel With Durable Etfe Coating

This highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This high efficiency 150W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Unique narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 510mm wide) Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) Black backing makes the solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces The panel is incredibly light (only 2.55kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 150W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 5-busbar solar cells: This panel also features new generation 5-busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. All-black design: This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors Solar panel specifications: Peak power: 150W Maximum power voltage: 18.8V Maximum power current: 7.98A Open circuit voltage: 22.0V Short circuit current: 8.38A Dimensions: 1550 x 510 x 2 mm Weight: 2.55 kg

250W ETFE Semi Flexible Solar Panel 1530 x 990 x 2mm OS250-20MFX

The 250W semi flexible solar panel is ideal for campervans, motorhomes, caravans, van conversions, and marine craft. This 2nd generation panel offers improved efficiency, durability, and an attractive all-black finish. It is easy to install with no need for external cable joints, making it a convenient choice. Enjoy reliable performance and peace of mind with a 2-year warranty. Fully waterproof and light weight design at just 4.4kg Low profile with a thickness of just 2mm Semi-flexible with up to 30° flexibility Attractive black finish with 1.5 metre cable High efficiency levels 2 year warranty Dimensions 1530 x 990 x 2.5 Parameter Value Item No. OS140-19.8MFX Pmax(W) 250 Vmp(V) 20 Imp(A) 12.5 Voc(V) 23.6 Isc(A) 13.75

£479.99

165w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT

165w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop-top roofs) Highly efficient Cells with a Durable ETFE Coating This 165w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 165w Semi-Flexible Durable Solar Panel Dimensions: 1500 x 660 x 2.5 Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) Double entry Roof Gland 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 5-year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar panel specifications: Fully waterproof and light weight design at just 3.2kg Low profile with a thickness of just 2.5mm Semi-flexible with up to 20° flexibility Attractive black finish with 1.5 metre cable High-efficiency levels 5-year warranty Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). MPPT Specifications The Victron 75/15 MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£249.99

120W Black Semi-Flexible Fibreglass Solar Panel with Durable ETFE Coating

A highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This high efficiency 120W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) Black backing makes the solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces The panel is incredibly light (only 2.19kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 120W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High quality 5-busbar solar cells: This panel also features new generation 5-busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. All-black design: This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system, for linking several panels together Solar panel specifications: Peak power: 120W Maximum power voltage: 20.5V Maximum power current: 5.86A Open circuit voltage: 24.0V Short circuit current: 6.15A Dimensions: 1025 x 665 x 2 mm Weight: 2.19 kg

£303.99

Victron 100W Monocrystalline Solar panel kit with BlueSolar MPPT, Mounts, Cables & MC4

100W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats Panel sizes are 845 x 670 x 30mm This 100w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron BlueSolar MPPT 75/10 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m black extension leads Full Kit with Victron 100W Monocrystalline panel, plastic or aluminum mounting brackets, Cable entry Gland, Victron BlueSolar 75/10 MPPT charge controller, 10m of Black PV Cable & MC4 Connectors, Resettable Circuit Breaker, MPPT to Battery Cables with In-Line Fuse. Mounts available: 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets Ideal for charging battery banks up to 250ah This highly efficient Victron solar 100w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£405.99

Budget 100w Flexible Solar Panel Kit

Kit Contents 100w Semi-Flexible Durable Solar Panel Victron Energy BlueSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) Double entry Roof Gland 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 2 year warranty on the Solar Panel 5 year warranty on Victron MPPT 100w Flexible Solar Panel Specifications: Peak power: 100W Maximum power voltage: 18.2V Maximum power current: 5.50A Open circuit voltage: 21.1V Short circuit current: 5.82A Dimensions: 990 x 540 x 2 mm Weight: 1.90 kg MPPT Specifications: Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on Victron for details. Day/night timing and light dimming option See the software section on Victron for details. Programming, real-time data and history display options – Color Control GX or other GX devices: see the Venus documents on our website. – A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC010010050R GTIN 8719076025306 Voltage 12/24V Rated Charge Current 10A Nominal PV Power, 12V 145W Max. PV Short Circuit Current 13A Max. PV Open Circuit Voltage 75V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H100 x W113 x D40mm Weight 0.5Kg Warranty 5 Years

...Read more View Product

£975.99

330w Pro Flexible Solar Panel Kit with Victron SmartSolar MPPT 100/30

330w Semi -Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/30 - (These kits are perfect for pop top roofs) Highly efficient German Cells with a Durable ETFE Coating Our flexible solar panel complete kit is suitable for many vehicle types, boats, and off-grid applications. Kit Contents 330w Semi-Flexible Durable Pro Solar Panel 2035 x 1020 x 2 mm Victron Energy SmartSolar MPPT 100/30 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) Double entry Roof Gland (Black or White) 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 2 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar Panel Specifications: This high efficiency, waterproof 330W semi-flexible solar panel is the largest semi-flexible solar panel available on the UK market. It is perfect for permanent outdoor use to provide free electricity for charging 12V or 24V batteries to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners or even zipping.Product features:Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditionsRobust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel that can be walked onIncredibly light (only 6.82kg) and very thin (just 2mm) which is great for motorhome and caravan roofsHigh resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified.The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter).The fibreglass plastic used in this solar panel is very strong and durable. When the solar panel is mounted on to a rigid surface, it is possible to walk on the solar panel in soft shoes (to prevent accidental scratches), which makes it the perfect choice for mounting on a boat deck.The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 connectors which can be used for easy connectivity to your existing system, linking several panels together or for connecting 4mm extension cable. Solar panel specifications: Peak power: 330W Maximum power voltage: 39.1V Maximum power current: 8A Open circuit voltage: 47.7V Short circuit current: 9.0A Dimensions: 1917 x 1020 x 2 mm Weight: 6.82 kg MPPT Specifications This Victron 100V 30A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device.Ultrafast MPPT Technology:This 30A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse current, PV reverse polarity and battery reverse polarity. The internal temperature sensor also protects the battery from overheating and will activate power derating if excessive temperatures are detected. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery, as well as 30 day performance data. The user can also specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 100/30 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24V selection- 2 pairs of terminals (solar panel, battery) for wires up to 13mm2- Inbuilt bluetooth- Max solar panel voltage: 100V- Max solar panel power: 440W (12V) / 880W (24V)- Temperature sensor for automatic compensation (-16mV °C resp. -32mV °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: 10mA- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 186 x 130 x 70 mm- Mounting dimensions: 175 x 75 mm- Weight: 1.3kg- 4 x mounting holes for ease of installation Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

NDS Energy Semi Flexible Solar Panel 12V 160W (Front Junction Box) - LSE160BF

NDS Energy Semi Flexible Solar Panel 12V 160W (Front Junction Box) - LSE160BF LIGHTSOLAR is the “Glass & Frameless” range of solar panels designed for applications where weight, thickness and resistance are fundamental characteristics. The cells of these monocrystalline panels, with an efficiency of 18.75%, are embedded in an exclusive multi-layer structure: the upper layer is a plastic polymer called ETFE highly resistant to corrosion and weathering, such that it can be defined as self-repairing. The surface of the panel, always exposed to scratches from tree branches, hail, sharp surfaces or other accidental shocks, is able to self-model, returning to the initial shape ideal for capturing sunlight. The lower layer of the structure is composed by an Alluminum sheet to contain and dissipate as much as possible the heat generated by the cells and to give the panel such strength that it is also perfect for nautical applications, where (with suitable and soft footwear) it is possible to step on the panel. Main Features: Structure - Built with 7 layers, including the ETFE surface, the best surface in terms of efficiency and durability, and an alluminum sheet that tightens it making it more robust and improving the dissipation of heat. Junction Box - The NDS aerodynamic box contains the supplied 3 meters connection cable and the bypass diodes required to reduce shading This special version of LightSolar has a completely flat surface, thanks to the use of a new connection method called Back Junction Box and laminated diodes included in the frame of the panel itself. The position of the connection cable, on the back, eliminates the Junction Box from the exposed surface of the panel. The round box, only 30mm in diameter, tightens the cable, making the connection solid and secure. This version is ideal for pop top roofs, minimizing space requirements, eliminating cable clutter, as well as unsightly and complex cable boxes. Number of cells 36 Nominal voltage 12V Max Power 160WP±3% Size (mm) 1253x673x4 Weight 5,82 Kg Open Circuit Voltage 23,3V Short Circuit Current 8,72A Max power Voltage 19,8V Max power Current 8,08A Length 3m cable 2×2,5mm²

...Read more View Product

£228.99

100W Semi-Flexible Fibreglass Solar Panel With Durable Etfe Coating

100W Semi-Flexible Fibreglass Solar Panel With Durable Etfe Coating - 3 Year Warranty At Van Junkies we love high-quality solar products. That's why we have developed this highly durable semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This high-efficiency 100W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and backup solar power systems. The panel can also be used to provide a direct power supply for applications not sensitive to changes in input voltage/current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 1.90kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 100W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High-quality 9-busbar solar cells: This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross-section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 100W Maximum power voltage: 18.2V Maximum power current: 5.50A Open circuit voltage: 21.1V Short circuit current: 5.82A Dimensions: 990 x 540 x 2 mm Weight: 1.90 kg This product comes with a 3-year workmanship warranty which covers material and production defects

£69.49

Pair Of 20M Single Core Extension Cable Leads 6.0Mm For Solar Panels And Solar Charging Kits

Pair Of 20 Metre Single Core Extension Cable Leads 6.0Mm For Solar Panels And Solar Charging Kits This pair of single core solar extension cables is specially designed for solar panels to carry high current and have negligible power loss. It comes with waterproof MC4 connectors ("male" on one lead, "female" on the other lead) which can be easily connected to similar MC4-type connectors coming with most solar panels, including Photonic Universe solar panels. This cable is suitable for all weather conditions including cold and hot temperatures.

...Read more View Product

£574.99

240W Pro Semi-Flexible Solar Panel - 5-Year Warranty

Now with a 5 year Warranty! This high-efficiency, waterproof 240W monocrystalline solar panel is the one of the largest semi-flexible solar panels available on the UK market. It is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners and even zipping. Product features: Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel that can be walked on Incredibly light (only 4.75kg) and very thin (just 2mm) which is great for motorhome and caravan roofs High resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications 100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified. The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter). The fibreglass plastic used in this solar panel is very strong and durable. When the solar panel is mounted on to a rigid surface, it is possible to walk on the solar panel in soft shoes (to prevent accidental scratches), which makes it the perfect choice for mounting on a boat deck. The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 compatible connectors which can be used for easy connectivity to your existing system, linking several panels together or for connecting a 4mm Cable. Solar panel specifications: Peak power: 240W Maximum power voltage: 25V Maximum power current: 9A Open circuit voltage: 34.9V Short circuit current: 9.7A Dimensions: 1434 x 1020 x 2 mm Weight: 4.75 kg

...Read more View Product

£449.99

160W Pro Semi Flexible mono solar panel with self-adhesive backing and 5-Year Warranty

5-Year Warranty - 160W Pro Semi Flexible mono solar panel with self-adhesive backing (Austrian Cells) 1434 x 699 mm This high-efficiency, waterproof 160W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications. The panel is ideal for curved roofs on boats, caravans, motorhomes, RVs etc. because it can easily fit to the shape of the roof when mounted. This panel can be instantly fitted using the peelable adhesive backing attached to the panel, or can also be secured using self-tapping screws, tenax fasteners or even zipping (not supplied). Product features: Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel that can be walked on Incredibly light (only 3.3kg) and very thin (just 2mm) which is great for motorhome and caravan roofs High resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications 100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified. The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter). The fibreglass plastic used in this solar panel is very strong and durable. When the solar panel is mounted on to a rigid surface, it is possible to walk on the solar panel in soft shoes (to prevent accidental scratches), which makes it the perfect choice for mounting on a boat deck. The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 compatible connectors which can be used for easy connectivity to your existing system

...Read more View Product

£319.99

Victron Energy BlueSolar MPPT 150/70 MC4 – SCC010070300

Victron Energy BlueSolar MPPT 150/70 MC4 – SCC010070300 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98 %. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature (and current, in case of a BMV-712 or a SmartShunt) to one or more BlueSolar Charge Controllers. (VE.Direct Bluetooth Smart dongle needed) Real-time data display options Color Control GX or other GX devices: see the Venus documents on our website. A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC010070300 GTIN 8719076025528 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150 V absolute maximum coldest conditions, 145 V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H215 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£329.99

160W Black Reinforced Semi-Flexible Solar Panel With Round Rear Junction Box And 3M Cable, With Durable Etfe Coating (German Solar Cells)

We love high quality solar products. That's why we have developed this highly durable black semi-flexible solar panel reinforced with anodised aluminium and a strong ETFE surface and made from German monocrystalline solar cells. This model also features a rear-fitted circular junction box and 3m dual core cable. This high efficiency 160W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 160W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Simple, professional installation:This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface.This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 5.70kg) which is great for all vehiclesHigh resistance to salt water environment (junction box and cables underneath are protected from contact with water) and possibility to walk on the panel make it perfect for boats and yachtsSealed waterproof design ensures the panel can be used in all weather conditionsJunction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting.Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Solar panel specifications: Peak power: 160W Maximum power voltage: 20.2V Maximum power current: 7.92A Open circuit voltage: 23.9V Short circuit current: 8.40A Power allowance range: +/- 5% Solar Panel dimensions: 1345 x 665 x 4 mm Junction Box diameter: 30 mm Weight: 5.70 kg 1 x 3m high quality dual core solar cable attached (4mm cross section)

£248.99

80W 12V Reinforced Narrow Semi-Flexible Solar Charging Kit

This high efficiency, semi-flexible 80W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:80W reinforced narrow semi-flexible solar panel with a durable ETFE coating (German solar cells)10A automatic solar charge controller with advanced connectivity optionsA pair of 5m 4mm single core solar extension cables with MC4 connectors5m of 4mm dual core battery cable 80W Reinforced narrow semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 80W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 3.05kg) which makes it an ideal option for all vehicle applications. The unique narrow design of this panel also makes it ideal for applications where space is restricted, or where there are obstructions on the roof. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 1m of cable with MC4 connectors at the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4mm cross section) and 5m of 4mm dual core battery cable for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 80WMaximum power voltage: 20.2VMaximum power current: 3.96AOpen circuit voltage: 23.9VShort circuit current: 4.20APower allowance range: +/- 5%Solar Panel Dimensions: 1365 x 350 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 3.05 kg2 x 1m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The panel and solar charge controller are covered by a 1 year workmanship warranty Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£168.99

50W 12V Reinforced Narrow Semi-Flexible Solar Charging Kit

This high efficiency semi-flexible 50W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:50W reinforced narrow semi-flexible solar panel with a durable ETFE coating (German solar cells)Advanced 10A solar charge controller with LCD display and powerful 2.4A dual USB outputA pair of 5m 4mm single core solar extension cables with MC4 connectors5m of 4mm dual core battery cable50W Reinforced narrow semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 50W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 2kg) which makes it an ideal option for all vehicle applications. The unique narrow design of this panel also makes it ideal for applications where space is restricted, or where there are obstructions on the roof. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 1m of cable with MC4 connectors at the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc.The LCD display shows information regarding real time solar panel and battery performance, including: voltage, current, battery state of charge, and battery temperature. An energy statistics counter also displays the accumulated daily and monthly charge values (useful for comparing solar panel performance between different periods).This solar charge controller also offers the rare and highly sought-after feature of a dual USB charging output. These 5V USB ports have a total combined output of 2.4A, offering fast and powerful charging of USB compatible devices such as mobile phones, tablets, mp3 players etc.An optional programmable load (e.g. 12V lighting / fans / water pumps) may also be connected directly to the solar charge controller. Using the buttons and LCD display, the user can set personalised On/Off timers for these appliances. In addition, this controller also offers various charging programs for different battery types, which can be easily selected by the user. In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4mm cross section) and 5m of 4mm dual core battery cable for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 50WMaximum power voltage: 20.2VMaximum power current: 2.48AOpen circuit voltage: 23.9VShort circuit current: 2.62APower allowance range: +/- 5%Solar Panel Dimensions: 880 x 350 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 2.00 kg2 x 1m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectorsCharge controller specifications:Fully automated operation and auto 12/24V selectionRated charge/discharge current: 10AMaximum solar panel input power: 160W (12V) / 320W (24V)Maximum solar panel input voltage 50VTemperature sensor for automatic compensation: -3mV/C/2V (25C)Working temperature: -25°C to +55°CSelf-consumption: max. ≤9.2mA (12V); ≤11.7mA (24V)3 pairs of terminals (solar, battery, optional load)Terminals for wire up to 4mm²Multiple mounting holes for ease of installationSize: 14.2 x 8.5 x 4.1 cmWeight: 220 gPlease note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The panel and solar charge controller are covered by a 1 year workmanship warranty

£468.99

300W 12V/24V Complete Solar Charging Kit With 20A Mppt Controller

This premium quality 300W 12V/24V solar charging kit is one of the most powerful solar charging kits for vehicles, boats or off-grid power systems. It can generate up to 17A charging current when charging a 12V battery, which means that a typical 100Ah battery will be charged from 0% to 100% in about 6 hours of bright sunlight.This 300W 12V/24V solar charging kit includes:High quality 300W monocrystalline solar panel fitted with 0.9m of 4.0mm solar cable and waterproof MC4 connectors20A 12V/24V high efficiency MPPT solar charge controller with an LCD displaySet of 4 corner plastic mounting brackets for bonding to the roofSet of 4 side mounting brackets for bonding to the roofWaterproof double entry cable gland5m of 4.0mm extension cable with waterproof MC4 connectors for the solar panel5m of 6.0mm dual core battery cable 300W monocrystalline solar panel:The high efficiency, waterproof 300W monocrystalline solar panel included in this kit has been manufactured to the highest standards. Each individual solar panel is thoroughly tested and labelled with a unique serial number for further quality control and increased warranty protection. It is ideal for all off-grid installations on caravans, campervans, motorhomes and boats for charging leisure battery banks or for standalone off-grid household solar systems with batteries.The panel is fitted with 2 x 0.9m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to the 5m single core extension cable supplied with the kit.20A MPPT solar charge controller:This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers.The controller features a comprehensive set of electronic protection functions such as stopping reverse current at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and protection against deep discharge, over voltage, over load, short circuit and reverse polarity. The LCD display shows various charging parameters such as voltage, current and power for the solar panel and the battery.Multiple connectivity options:This solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.The controller can automatically recognise 12V/24V battery systems. Note: in order to start the solar charge controller in the correct voltage mode, a working battery should always be connected to the controller first before connecting the solar panel.Additional items:This kit also includes 5m positive and negative extension leads for connecting the solar panel to the solar charge controller, a 5m 6.0mm dual core battery cable for use between the solar charge controller and your battery, a set of 4 corner and 4 side mounting brackets for fixing the solar panel to the roof using an appropriate sealant (not included) and a waterproof double cable entry gland for keeping the cable connection fully waterproof when mounting the panel outside and feeding the solar cables inside the vehicle / building / below deck.Solar panel specifications:Peak power: 300WMaximum power voltage: 32.70VMaximum power current: 9.17AOpen circuit voltage: 39.80VShort circuit current: 9.78APower tolerance: 0/+3%Dimensions: 164 x 99 x 3.5 cmWeight: 19 kgMounting holes for installation2 x 1m of high quality single core solar cable 4.0mm² cross sectionMale and female MC4 connectors Charge controller specifications:The most advanced MPPT technology to ensure high efficiency of your solar systemFully automated operation and auto 12V/24V charging voltage selection3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2Maximum solar panel voltage 100VMaximum solar panel power 260W (12V) / 520W (24V)Comprehensive electronic protectionSelf-consumption: less than 20mAWorking temperature: -25C to +45CSize: 17 x 14 x 4.5 cmWeight: 1.1 kgMultiple mounting holes for ease of installation Mounting accessory specifications:Material: plasticColour: whiteCable diameter for the cable gland: 3-7mmSize: each corner bracket 15 x15 x 6.5 cm, each side bracket 18 x 9 x 6.5 cm, cable gland 11 x 9 x 4 cmCombined weight: 2.7kg Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.The product is covered by a 1 year warranty. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells.

£789.00

360W Pro Semi-Flexible Solar Panel (with 5-Year Warranty

Now with a 5 year warranty! This high efficiency, waterproof 360W semi-flexible solar panel is the largest semi-flexible solar panel available on the UK market. It is perfect for permanent outdoor use to provide free electricity for charging 12V or 24V batteries to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners or even zipping.Product features:Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditionsRobust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel that can be walked onIncredibly light (only 6.82kg) and very thin (just 2mm) which is great for motorhome and caravan roofsHigh resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified. The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter).The fibreglass plastic used in this solar panel is very strong and durable. When the solar panel is mounted on to a rigid surface, it is possible to walk on the solar panel in soft shoes (to prevent accidental scratches), which makes it the perfect choice for mounting on a boat deck. The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 connectors which can be used for easy connectivity to your existing system, linking several panels together or for connecting 4mm extension cable. Solar panel specifications: Peak power: 360W Maximum power voltage: 39.1V Maximum power current: 9A Open circuit voltage: 47.7V Short circuit current: 9.0A Dimensions: 2035 x 1020 x 2 mm Weight: 6.82 kg

£319.99

160W Black Reinforced Semi-Flexible Solar Panel With A Durable Etfe Coating (German Solar Cells)

We love high quality solar products. That's why we have developed this highly durable black semi-flexible solar panel reinforced with anodised aluminium and a strong ETFE surface and made from German monocrystalline solar cells. This high efficiency 160W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 160W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.All-black design:This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 5.75kg) which is great for all vehiclesHigh resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts.Sealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system, for linking several panels together or for connecting 4mm extension cable. Solar panel specifications: Peak power: 160W Maximum power voltage: 20.2V Maximum power current: 7.92A Open circuit voltage: 23.9V Short circuit current: 8.40A Power allowance range: +/- 5% Solar Panel Dimensions: 1380 x 665 x 4 mm Weight: 5.75 kg 2 x 1m of high quality single core solar cable (4mm² cross section) Male and female MC4 connectors

£89.49

30W Reinforced Semi-Flexible Solar Panel With A Durable Etfe Coating (German Solar Cells)

This high efficiency 30W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 30W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 1.35kg) which is great for all vehiclesHigh resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts.Sealed waterproof design ensures the panel can be used in all weather conditions. The panel is fitted with 2 x 0.9m of cable specially designed for solar panels to carry high currents with negligible power loss (2.5mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system, for linking several panels together or for connecting 2.5mm extension cable. Solar panel specifications: Peak power: 30W Maximum power voltage: 20.2V Maximum power current: 1.49A Open circuit voltage: 23.9V Short circuit current: 1.57A Power allowance range: +/- 5% Solar Panel Dimensions: 505 x 400 x 4 mm Junction Box Dimensions: 90 x 16 x 16 mm Weight: 1.35 kg 2 x 0.9m of high quality single core solar cable (2.5mm² cross section) Male and female MC4 connectors

£88.99

High Efficiency 20A Mppt Solar Charge Controller For Solar Panels Up To 260W (12V) / 520W (24V) Up To 100V

MPPT Technology:This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined input solar power allowed for this controller is 260W for a 12V battery system or 520W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full system protection:This charge controller features a comprehensive set of electronic protection functions to ensure the maximum possible efficiency of your solar system. These include: reverse current prevention at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, solar panel over voltage, over load, short circuit and reverse polarity protection. The controller also has self-diagnostic capability and highlights any system errors using advanced fault-targeting technology. Lithium Battery charging:This solar charge controller is compatible with lithium batteries when a lithium battery charging program is selected using PC software (see below for more details).Advanced system monitoring:The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel)Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energyEasy to use buttons allow the user to manually select the battery type (sealed, flooded or gel) and program load settings (e.g. set timers for lighting, fans, pumps etc).Current limiting function (20A) allows the possibility of adding more solar panels to your solar system in the future Multiple connectivity optionsThis model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only). If using the RJ45 to USB cable, the user also has the option to create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and can also set the charging parameters for lithium batteries.Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. (Inbuilt temperature sensor is not enabled for lithium batteries). Controller specifications: The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system Fully automated operation and auto 12/24V selection 3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 260W (12V) / 520W (24V) Temperature sensor for automatic compensation (-3mV/°C/2V) Comprehensive electronic protection features Communication port: RS485/RJ45 interface Grounding: negative common ground Current limiting function (20A) Self-consumption: <12mA Working temperature: -25°C to +50°C Size: 22 x 15.4 x 5.2 cm Mounting dimension: 17 x 14.5 cm Weight: 0.94kg Multiple mounting holes (5mm diameter) for ease of installation

...Read more View Product

£55.99

High Efficiency 10A Mppt Solar Charge Controller For Solar Panels Up To 130W (12V) / 260W (24V) Up To 100V

MPPT Technology:This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined input solar power allowed for this controller is 130W for a 12V battery system or 260W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full system protection:This charge controller features a comprehensive set of electronic protection functions to ensure the maximum possible efficiency of your solar system. These include: reverse current prevention at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, solar panel over voltage, over load, short circuit and reverse polarity protection. The controller also has self-diagnostic capability and highlights any system errors using advanced fault-targeting technology. Lithium Battery charging:This solar charge controller is compatible with lithium batteries when a lithium battery charging program is selected using PC software (see below for more details).Advanced system monitoring:The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel)Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energyEasy to use buttons allow the user to manually select the battery type (sealed, flooded or gel) and program load settings (e.g. set timers for lighting, fans, pumps etc).Current limiting function (10A) allows the possibility of adding more solar panels to your solar system in the future Multiple connectivity options:This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only). If using the RJ45 to USB cable, the user also has the option to create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and can also set the charging parameters for lithium batteries.Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. (Inbuilt temperature sensor is not enabled for lithium batteries). Controller specifications: The most advanced MPPT technology to ensure high efficiency (>95%) of your solar system Fully automated operation and auto 12/24V selection 3 pairs of terminals (solar panel, battery, load) for wires up to 4mm2 Maximum solar panel voltage 100V Maximum solar panel power 130W (12V) / 260W (24V) Temperature sensor for automatic compensation (-3mV/°C/2V) Comprehensive electronic protection features Communication port: RS485/RJ45 interface Grounding: negative common ground Current limiting function (10A) Self-consumption: <12mA Working temperature: -25°C to +50°C Size: 17.2 x 13.9 x 4.4 cm Mounting dimensions: 13 x 13 cm Weight: 0.57 kg Multiple mounting holes (5mm diameter) for ease of installation

...Read more View Product

£33.99

Waterproof 10A 12V/24V Solar Charge Controller / Regulator For Caravans, Motorhomes, Campervans, Boat, Yacht And Marine Applications

This high quality waterproof 10A 12V/24V solar charge controller is designed to protect batteries whilst charging them, having automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, battery type selection, dual timer function and several load work modes.This controller can work with sealed, gel and flooded batteries (simpler controllers can only work with one battery type). In addition, it can accept a wide range of solar input voltage up to 50V, so this controller can work not only with standard off-grid solar modules, but also with on-grid panels which have higher voltage. The controller can handle up to 160W (with 12V batteries) / 320W (with 24V batteries) of solar panels, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a camper van or boat.In addition, the solar charge controller has a very high degree of water protection - IP67 (which means it's completely sealed), so it is absolutely safe to use this solar kit in all weather conditions.Further to the built-in temperature sensor there is an external temperature sensor located on the controller to measure the ambient temperature more precisely and optimise the charging process.This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings. Requires a RS485 to RJ45 cable to extend from controller to the remote meter.2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users). Requires an RS485 to RJ45 cable to extend from controller to the Wi-Fi module.3) An RS485 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.

£319.99

Victron Energy BlueSolar MPPT 150/70-Tr – SCC010070200

Victron Energy BlueSolar MPPT 150/70-Tr – SCC010070200 This Victron 150V 70A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 70A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 150-70 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Brand Victron Energy Manufacturer Part Number SCC010070200 GTIN 8719076025511 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150 V absolute maximum coldest conditions, 145 V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£999.99

500W flexible CIGS solar panel with self-adhesive backing (Made in Sweden)

Introducing our fully flexible SELM (CIGS) solar panels that are TUV-certified and manufactured in Sweden to the highest European quality standards. They are constructed using CIGS (Copper Indium Gallium Selenide) thin-film technology for maximum flexibility and performance under mechanical stresses. SELM panels are built for durability and efficiency, they offer unmatched performance, even in shaded conditions, and are one of the most eco-friendly options on the market. These products are lightweight and ideal for applications requiring flexibility and adaptability, such as curved surfaces and modern architectural projects, industrial projects, residential rooftops, and mobile setups. Robust and Long-Lasting Technology: This panel comes with an impressive 10-year product warranty and a 25-year performance warranty, ensuring long-term reliability and peace of mind. It is designed to withstand the toughest conditions while delivering consistent energy output over time. Shatterproof and Crackproof Construction: Unlike the more common crystalline solar panels, a CIGS panel is fully flexible and walkable, meaning it can endure mechanical impacts and the expansion and contraction of roof materials without suffering from microcracks. It is built to last, even under the most extreme conditions. Superior Shading Performance: This SELM panel boasts an exceptional ability to handle shading. With bypass diodes between every cell, it outperforms conventional solar panels (which typically have only one diode per 30-50% of the area) in partially shaded conditions, delivering 10-20% higher annual energy yield. Industry-Leading Sustainability: These solar panels have one of the lowest carbon footprints in the industry, producing only 4-6 g/kWh of CO2 emissions during their lifecycle—90% less than standard crystalline solar panels, which emit 40-60 g/kWh. Streamlined Installation: Installation is easy with the strong self-adhesive backing that allows for quick and easy setup on a wide range of surfaces, including bitumen roofs and roofing felts. There is no need for complex mounting hardware—just peel and stick. Sleek Aesthetic Design: The full-black construction gives the SELM panel a modern, elegant look, making it ideal for rooftops where aesthetics matter. Its sleek design ensures it blends seamlessly with your roof for a discreet and attractive installation. Solar panel specifications: Peak power: 500W Maximum power voltage: 60.2V Maximum power current: 8.3A Open circuit voltage: 75.1V Short circuit current: 9.3A Dimensions: 2583 x 1292 x 2.5mm Weight: 6.6kg This product comes with a 10 year product warranty which covers material and production defects and a 25-year performance warranty.

...Read more View Product

£849.99

320W flexible CIGS solar panel with self-adhesive backing (Made in Sweden)

Introducing our fully flexible SELM (CIGS) solar panels that are TUV-certified and manufactured in Sweden to the highest European quality standards. They are constructed using CIGS (Copper Indium Gallium Selenide) thin-film technology for maximum flexibility and performance under mechanical stresses. SELM panels are built for durability and efficiency, they offer unmatched performance, even in shaded conditions, and are one of the most eco-friendly options on the market. These products are lightweight and ideal for applications requiring flexibility and adaptability, such as curved surfaces and modern architectural projects, industrial projects, residential rooftops, and mobile setups. Robust and Long-Lasting Technology: This panel comes with an impressive 10-year product warranty and a 25-year performance warranty, ensuring long-term reliability and peace of mind. It is designed to withstand the toughest conditions while delivering consistent energy output over time. Shatterproof and Crackproof Construction: Unlike the more common crystalline solar panels, a CIGS panel is fully flexible and walkable, meaning it can endure mechanical impacts and the expansion and contraction of roof materials without suffering from microcracks. It is built to last, even under the most extreme conditions. Superior Shading Performance: This SELM panel boasts an exceptional ability to handle shading. With bypass diodes between every cell, it outperforms conventional solar panels (which typically have only one diode per 30-50% of the area) in partially shaded conditions, delivering 10-20% higher annual energy yield. Industry-Leading Sustainability: These solar panels have one of the lowest carbon footprints in the industry, producing only 4-6 g/kWh of CO2 emissions during their lifecycle—90% less than standard crystalline solar panels, which emit 40-60 g/kWh. Streamlined Installation: Installation is easy with the strong self-adhesive backing that allows for quick and easy setup on a wide range of surfaces, including bitumen roofs and roofing felts. There is no need for complex mounting hardware—just peel and stick. Sleek Aesthetic Design: The full-black construction gives the SELM panel a modern, elegant look, making it ideal for rooftops where aesthetics matter. Its sleek design ensures it blends seamlessly with your roof for a discreet and attractive installation. Solar panel specifications: Peak power: 320W Maximum power voltage: 49.9V Maximum power current: 6.6A Open circuit voltage: 60.9V Short circuit current: 7.6A Dimensions: 2001 x 1298 x 2mm Weight: 7.5kg This product comes with a 10 year product warranty which covers material and production defects and a 25-year performance warranty.

...Read more View Product

£1,099.40

Victron 925W Monocrystalline Solar kit with SmartSolar 150/60 MPPT, Mounts, Cables & MC4s

925W Victron Energy Mono Solar Panel Kit - Perfect for Campervans, Motorhomes, Boats & Narrowboats 5 x 185w Victron panels - Panel sizes are 1485x668x30mm This kit is designed for the panels to be joined in series, mounts are optional. This 925w Large Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 150/60 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 10m black extension leads Full Kit with Victron 5 * 185W Monocrystalline panels, OPTIONAL 5 * plastic corner fixing bracket sets or 5 * Aluminium Solar Bracket sets, Cable entry Gland, Victron SmartSolar Bluetooth enabled 150/60 MPPT charge controller, 10m of Black PV Extension Cable s(x2) with MC4 Connectors, Mounts available (optional): 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets This highly efficient Victron solar 925w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline Victron solar cells and the tough, sealed, aluminum frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Wiring guide for Solar Panel Kits in Series

...Read more View Product

£39.99

Waterproof 15A 12V/24V MPPT solar charge controller for Caravans, Motorhomes, Campervans & Marine Applications

This high quality waterproof 15A 12V/24V solar charge controller is designed to protect batteries whilst charging them, with a full range of automatic protection features. The controller uses high efficiency MPPT charging technology to get the most possible power out of your solar panels. This controller stops reverse current (from the battery back to the solar panel) so your battery won't lose any charge at night and can be left permanently connected. It has many other protection functions such as over charge / discharge shut-off, over load and short circuit protection for the load terminals, overheating protection for the battery and more. This controller can work with sealed/AGM, gel and flooded/wet batteries. With a wide range of solar input voltages (up to 55V) this controller can work not only with standard off-grid solar modules, but also with on-grid panels which have higher voltage. The controller can accept up to 200W (in a 12V system) or 400W (in a 24V system) of solar panels which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a camper van or boat. In addition, the solar charge controller is completely sealed with a very high degree of water protection. It is absolutely safe to use this solar controller in all weather conditions. With the remote IR programmer (purchased separately), this controller can be wirelessly monitored and adjusted. The controller has a fully programmable timer with dimmer functionality, which monitors the dusk and dawn times based on the solar panel voltage and can adjust the percentage power of the load in 5 independently timed stages, making this controller ideal for outdoor lighting systems. Controller specifications: Protection rating: IP67 Default charging program: Gel Current rating: 15A Max solar input power: 200W (12V system) / 400W (24V system) Max solar input voltage: 55V Self-consumption: 6mA Ambient conditions: -35 – +60°C, 0 – 100% RH humidity, <4000m altitude Dimensions: 85.8 x 145 x 30 mm Weight: 600g Mounting holes for ease of installation

...Read more View Product

£414.99

100w SUNPOWER Flexible Solar Kit with Victron SmartSolar MPPT 75/15

100w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop-top roofs) SUNPOWER & VICTRON - THE PERFECT COMBINATION - 5 YEAR WARRANTY! This 100w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes, and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 100w SUNPOWER Semi-Flexible Durable Solar Panel Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) Double entry Roof Gland 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 5-year warranty on the Solar Panel 5-year warranty on Victron MPPT Solar Panel Specifications: Dimensions: 45.9"(L) x 21.9"(W) x 0.1"(W) (0.8" including J-Box) Weight: 4.4lbs - Lightweight, Portable & Easy to Stow Rated Voltage (Vmpp) 17.1V | Rated Current (Impp) 5.9A - Powerful Flexible up to 30 degrees - Suitable for Irregular Surfaces 32 high efficiency (23%) monocrystalline Maxeon™ Gen II prime solar cells - More Power in Less Space Premium cosmetic quality Junction box with by-pass diode has IP67 protection- Robust Design, Water & Dust Proof! 17.7" long cables (12AWG) with PV4-S Connectors (MC4 compatible) - Reliable & Safe with IP68 Protection 6 x 316 Stainless steel grommets (5/16" I.D.) - Diverse Installation Options 5-Year power & 2-Year product warranty (no salt water exclusion) - Backed by SunPower Solar cells are made in the Philippines. The panel is assembled in France Individually packaged & protected for shipping. Includes safety & installation guide Solar cells made in the Philippines Solar panel assembled in France MPPT Specifications The Victron 75V 15amp MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£159.00

Ecoflow 100w Black Solar Panel x 2

ECOFLOW 100W BLACK RIGID SOLAR PANEL X2.When there is no power supply to connect to the EcoFlow 100W Rigid Solar Panel is the perfect solution to recharging your EcoFlow Power Kit Batteries or portable power station. The EcoFlow rigid solar panel is constructed with monocrystalline silicon cells which are highly efficient and reliable. The solar panel has been designed to work with the EcoFlow Power Kits, or the EcoFlow range of portable battery generators.The EcoFlow 100W rigid solar panel is an efficient, solid solar panel and comes with pre-cut holes on the panel ready to mount on your van or off-grid build. Weighing in at just 6.2kg each the EcoFlow solar panel can attach to any surface with the aid of the rigid solar panel mounting feet. EcoFlow rigid solar panels can be connected in series or parallel to generate extra charging capacity. With the MC4 output this EcoFlow rigid solar panel can connect to any of the EcoFlow Power Kits or other EcoFlow portable power station and other portable battery generators.IS THE ECOFLOW 100W RIGID SOLAR PANEL WATERPROOF AND DURABLE?Being of a waterproof construction (Waterproof IP Rating: IP68) the EcoFlow 100W rigid solar panel can withstand all weather conditions. The panel can withstand dirt, low-pressure water jets, extreme winds of up to 130 mph, and even heavy snowfalls.WHAT’S IN THE BOX2 x EcoFlow 100W rigid solar panel, 2 x Rigid Solar Panel mounting feet, User Manual and Warranty CardMAIN FEATURES:Model 100W Rigid Solar PanelRated Power: 100 W（+/-5W）Cell Type Monocrystalline SiliconOUTPUT:Power 100 WRated Power: 100 W（+/-5W）Open Circuit Voltage 20.3 VShort Circuit Current 6.3 ATemperature Coefficient of Open Circuit Voltage -0.33%/°CTemperature Coefficient of Short Circuit Current 0.06%/°CMaximum Operating Voltage 17.1 VEFFICIENCY:23%CELL TYPE:Monocrystalline siliconWATERPROOF IP RATING:IP68DIMENSIONAL DATA:Length (L) cm 98Width (W) cm 58.6Height (H) cm 3Weight Kg 6.2

...Read more View Product

£539.99

Victron 185w Solar Panel Kit with 500w Inverter

Complete 185W Victron Energy Solar Panel Kit with 500w Inverter. Perfect for Campervans, Motorhomes & Boats. (This kit does not include Batteries) This kit is ideal to provide solar charging and 230v power for campervans, motorhomes, yachts, boats, cabins and static caravans that need a small amount of 230v power to power appliances such as lights, chargers and fans. Kit Includes: 185w Victron Monocrystalline Solar Panel ( 1448mm x 668mm )Victron 75/15 Smartsolar MPPT Charge ControllerVictron Phoenix 500kva Inverter6 Piece Roof Mount KitDouble Entry Roof Gland50amp Switchable Circuit Breaker5m 6mm Solar Extension Cables with MC4 Connectors20amp Fused MPPT to Battery Cables2m of Red & 2m of Black 25mm Battery Cable2 x BusBarsBattery Lugs What will 185w power? The 185w Victron solar panel is super efficient and given reasonable weather conditions will keep up with the average usage of the following 12v Appliances: LED Lighting - 15w USB Charging - 18w 40-60 Litre Fridge - 60w Roof Fan - 25w Diesel Heater - 30w 12v TV - 40w What 230v Appliances will the Inverter power? Laptop Charger - 80w PS5 / XBox - 250w 230v TV - 60w Projector - 50w Need to modify this kit or ask a question? GET IN TOUCH Wiring Diagram

...Read more View Product

£1,124.99

Off Grid Solar Kit - 1Kw Hybrid Inverter - 370w Solar - 250ah AGM Battery Storage

370w 12V Complete Off-Grid Starter Solar Power System With 2 X 175W Solar Panels, 1Kw Hybrid Inverter And 2 x 125ah of AGM Battery Storage This Complete Off-grid Solar Power System is the perfect ready-to-use kit for off-grid applications requiring a reliable and constant source of power for small household appliances and lighting in areas without access to or without stable mains electricity. This kit can provide power to small and medium household or office appliances such as a fridge, TV, radio, lights, or computer.This complete off-grid kit has been expertly designed to maximise efficiency and output and therefore comes equipped with some of our most premium quality products; including a Victron solar panel and a state-of-the-art Iconica hybrid power inverter - an intelligent combination of a high-efficiency MPPT solar charge controller, pure sine wave inverter and smart mains battery charger in one single unit.Kit includes:2 x 185W Victron solar panelsIconica Hybrid 1000W 12V pure sine wave inverter2 x 125Ah AGM deep cycle leisure batteries50ah circuit breakerA pair of 5m 6mm2 solar extension cables with MC4 connectors8m of 25mm2 tinned copper battery cablesBattery Lugs2 x 6 Piece Solar panel Mount Kit or Z Brackets1 x Double Entry Roof Gland1 x Victron Battery Kill Switch1 x Meg Fuse & Holder This kit can easily be expanded with additional solar panels and battery storage at any stage. The Iconica 1000W 12V hybrid inverter intelligently combines the functions of a 1000W pure sine wave inverter, 40A MPPT solar charge controller and a 20A smart battery charger in one single portable unit. This model can accept input from solar panels, mains power/ generator and a battery - either from a single or combination of input sources. In addition to its unique hybrid capability, this innovative inverter features advanced communication functions, along with a menu full of highly customisable settings. This is the perfect solution for any off-grid application with limited or zero access to traditional mains power. This hybrid inverter features an Uninterrupted Power Supply (UPS), making it the ideal option for applications where the power supply is unreliable, intermittent or expensive to maintain. This inverter is great for both stationary and mobile off-grid installations (e.g. remote properties, holiday homes, huts and cabins or narrowboats, yachts etc), as well as for customers looking to reduce their mains electricity usage and save on electricity bills. It could also create the perfect back-up system in locations suffering from frequent power cuts. Key functions: 1. 1000W 12V Pure sine wave inverter: Converts DC current into 230V AC mains electricity, to run various household appliances such as a TV, laptop, lighting, fans etc. Able to generate 1000VA of continuous power with a strong peak power handling capability of up to 2000VA (to start appliances with electric motors). This inverter is a pure sine wave type, which easily surpasses modified sine wave inverters in terms of efficiency and compatibility with a wider range of appliances. 2. Inbuilt 40A MPPT solar charge controller: The high efficiency MPPT controller regulates the input from the solar panels to the batteries or to load, with a full range of safety functions including protection against overcharge, overheating, reverse current etc. The controller operates at up to 98% efficiency to extract the maximum possible power from the solar array. 3. Enhanced 20A Smart battery charger: Designed to enable safe and efficient unattended charging of a battery from a mains power source or generator, with full overcharge protection and multiple charging stages. Additional intelligent features: The Iconica 1000W 12V hybrid inverter boasts an abundance of unique features, providing enhanced functionality over standard inverters. These include: - Output source priority: This intelligent feature allows the user to set output source preferences(solar/ battery power/ mains input or a generator) for the AC load output of the inverter. This menu includes several options for varying conditions and scenarios, e.g. which source of energy is given priority for the AC output if solar power is insufficient/ if battery voltage is too low/ if mains is unavailable, etc. - Battery charging priority: A wide selection of battery charging priority options are available. For instance, the user can choose to charge the battery using solar power only/ using a combination of solar power and mains power/ from mains power only etc. - A range of highly customisable settings: The parameters for this inverter can be personalised to an exceptionally specific degree via the user-friendly interface. At the touch of a button, the user can customise parameters such as the AC input range, battery type, max charging current, specific high/low voltage disconnect points (and preferred charging source upon reconnection), the duration and voltage of each charging stage, auto-restart options, power saving mode, overload bypass, battery equalization stage characteristics and so on. There are also options for managing operational features such as the audible alarm and backlight settings. - Illuminated LCD screen: Displays vital statistics which are easily changeable by use of the up/down keys. This information includes: status and mode, input/output voltage, frequency, battery voltage, load power and percentages, charge and discharge current etc.Our AGM deep-cycle batteries are non-spillable, completely sealed and maintenance-free - amongst the very safest batteries you can find. They have a much longer service life compared to standard wet-cell batteries due to lower degradation and corrosion inside the battery. AGM batteries hold charge very well and have a low self-discharge rate. Low voltage-temperature coefficient enhances high-temperature operation. Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. 25-Year limited warranty on power output and performance. 5-Year limited warranty on materials and workmanship. Sealed, waterproof, multi-functional junction box gives high level of safety. High performance bypass diodes minimize the power drop caused by shade. Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors. Brand Victron Energy Manufacturer Part Number SPM041851200 GTIN 8719076040361 Voltage 12V Nominal Power 185W Cell Type Monocrystalline Number of Cells in Series 36 Maximum System Voltage 1000V Dimensions L1485 x W668 x D30mm Weight 11Kg Warranty 5 Years Hybrid inverter specifications: Nominal battery voltage: 12V Continuous power output: 1000W / 1000VA Surge power: 2000VA Output voltage: 230V AC Output frequency: 50Hz Output waveform: Pure sine wave Maximum solar input power: 500W Maximum open circuit solar input voltage: 102V Maximum solar charging current: 40A MPPT operating voltage range: 15V – 80V Maximum mains AC charging current: 20A Maximum combined charging current: 60A Peak efficiency: 93% Operating temperature: -10C to 50C Supplied with: 1.5m AC power cable with 3-pin UK plug PC connection cable and software Size: 32 x 22.5 x 8.8 cm Weight: 5 kg

...Read more View Product

£389.00

Sharp High Performance NU-JD540 540w PERC Solar Panel

Sharp High Performance NU-JD540 540w Solar Panel The High Performer Guaranteed positive powertolerance (0/+5 %) MBB busbar technologyImproved reliabilityHigher efficiencyReduced series resistance High module efficiency 21.0 %PERC monocrystalline siliconphotovoltaic modules Half-cut cellImproved shading performanceLower internal lossesReduced hot spot risk Robust product designPID resistance test passedSalt mist test passed (IEC61701)Ammonia test passed (IEC62716)Dust and sand test passed (IEC60068) 15 YEAR PRODUCT GUARANTEE NU-JD540 Maximum power Pmax 540 Wp Open-circuit voltage Voc 50.34 V Short-circuit current Isc 13.66 A Voltage at point of maximum power Vmpp 41.64 V Current at point of maximum power Impp 12.97 A Module efficiency ηm 20.89 % Length 2,279 mmWidth 1,134 mmDepth 35 mmWeight 27.8 kg Datasheet Sharp High Performance NU-JC410 410w Solar Panel Installation Manual Sharp High Performance NU-JD540 410w Solar Panel Installation Manual

...Read more View Product

£111.00

NDS Energy Sun Control 2 12V 320W MPPT With N-Bus - SCE320

SUNCONTROL2 is the latest and most innovative charge regulator from NDS. The MPPT technology allows to optimize the energy from any solar panel, performing the most modern charging curves, for batteries always charged and efficient over time. Solid and functional thanks to the professional terminal block and equipped with updated communication protocols LIN-BUS / CI-BUS, SUNCONTROL2 is ideal for an installation destined to last over time. Available in two different versions: SC320M with input for two panels up to 320W (without cooling fan) and SC350M which supports up to 350W. The charge regulator is the heart of the photovoltaic system, choosing suncontrol2 means making the most of all the potential of today and the future Main Features: Temperature Sensor Latest Generation Lin-Bus/Ci-Bus Communication Protocols Professional Terminal Block Recharge Starting Battery 5-Stages Charging Curves Desulphation System LED Charging Status Separate Input for Panel Nominal Voltage 12V Nominal Voltage Input 30A Maximum Charging Current 20A Module Max Power 320W MPPT System Yes Protection Fuse 30A Bluetooth No Dimensions L151 x W90 x D48mm Warranty 2 Years

...Read more View Product

£268.00

NDS Energy Semi Flexible Solar Panel 12V 105W (Front Junction Box) - LSE105BF

NDS Energy Semi Flexible Solar Panel 12V 105W (Front Junction Box) - LSE105BF LIGHTSOLAR is the “Glass & Frameless” range of solar panels designed for applications where weight, thickness and resistance are fundamental characteristics. The cells of these monocrystalline panels, with an efficiency of 18.75%, are embedded in an exclusive multi-layer structure: the upper layer is a plastic polymer called ETFE highly resistant to corrosion and weathering, such that it can be defined as self-repairing. The surface of the panel, always exposed to scratches from tree branches, hail, sharp surfaces or other accidental shocks, is able to self-model, returning to the initial shape ideal for capturing sunlight. The lower layer of the structure is composed by an Alluminum sheet to contain and dissipate as much as possible the heat generated by the cells and to give the panel such strength that it is also perfect for nautical applications, where (with suitable and soft footwear) it is possible to step on the panel. Main Features: Structure - Built with 7 layers, including the ETFE surface, the best surface in terms of efficiency and durability, and an alluminum sheet that tightens it making it more robust and improving the dissipation of heat. Junction Box - The NDS aerodynamic box contains the supplied 3 meters connection cable and the bypass diodes required to reduce shading This special version of LightSolar has a completely flat surface, thanks to the use of a new connection method called Back Junction Box and laminated diodes included in the frame of the panel itself. The position of the connection cable, on the back, eliminates the Junction Box from the exposed surface of the panel. The round box, only 30mm in diameter, tightens the cable, making the connection solid and secure. This version is ideal for pop top roofs, minimizing space requirements, eliminating cable clutter, as well as unsightly and complex cable boxes. Nominal Voltage 12V Nominal Power 105W Number of Cells in Series 36 Dimensions L1068 x W503 x D4mm Weight 3.97Kg Warranty 2 Years

...Read more View Product

£268.99

NDS Energy Semi Flexible Solar Panel 12V 105W (Rear Junction Box) - LSE105BR

NDS Energy Semi Flexible Solar Panel 12V 105W (Rear Junction Box) - LSE105BR LIGHTSOLAR is the “Glass & Frameless” range of solar panels designed for applications where weight, thickness and resistance are fundamental characteristics. The cells of these monocrystalline panels, with an efficiency of 18.75%, are embedded in an exclusive multi-layer structure: the upper layer is a plastic polymer called ETFE highly resistant to corrosion and weathering, such that it can be defined as self-repairing. The surface of the panel, always exposed to scratches from tree branches, hail, sharp surfaces or other accidental shocks, is able to self-model, returning to the initial shape ideal for capturing sunlight. The lower layer of the structure is composed by an Alluminum sheet to contain and dissipate as much as possible the heat generated by the cells and to give the panel such strength that it is also perfect for nautical applications, where (with suitable and soft footwear) it is possible to step on the panel. Main Features: Structure - Built with 7 layers, including the ETFE surface, the best surface in terms of efficiency and durability, and an alluminum sheet that tightens it making it more robust and improving the dissipation of heat. Junction Box - The NDS aerodynamic box contains the supplied 3 meters connection cable and the bypass diodes required to reduce shading This special version of LightSolar has a completely flat surface, thanks to the use of a new connection method called Back Junction Box and laminated diodes included in the frame of the panel itself. The position of the connection cable, on the back, eliminates the Junction Box from the exposed surface of the panel. The round box, only 30mm in diameter, tightens the cable, making the connection solid and secure. This version is ideal for pop top roofs, minimizing space requirements, eliminating cable clutter, as well as unsightly and complex cable boxes. Nominal Voltage 12V Nominal Power 105W Number of Cells in Series 36 Dimensions L1253 x W673 x D4mm Weight 5.82Kg Warranty 2 Years

...Read more View Product

£625.99

200w Flexible Lightweight Black Solar Panel Kit with Victron SmartSolar MPPT 75/15

200w Flexible Black Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4) Highly efficient German Cells This 200w Flexible Black Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 200w Flexible Durable Solar Panel with ETFE Coating Dimensions: 1495. X 680 Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) 2 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar Panel Specifications: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 3.65kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High-quality 9-busbar solar cells: This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 200W Maximum power voltage: 17.6V Maximum power current: 11.36A Open circuit voltage: 20.8V Short circuit current: 12.05A Dimensions: 1495 x 680 Weight: 3.65 kg MPPT Specifications The Victron 75V 15A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£703.99

250W Mono Solar panel kit with SmartSolar MPPT, AGM Battery & Accessories

250W Victron Energy Solar Panel Kit with 100ah AGM Battery and all Accessories Panel size: 139 x 99 x 4 cm This highly efficient, 250W monocrystalline solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps). Low voltage-temperature coefficient enhances high-temperature operation. • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 5m pre-wired quick-connect system with MC4 (PV-ST01) connectors Full Kit Including: Victron 250W Monocrystalline panelPlastic corner fixing brackets or Aluminium Z BracketsCable entry Gland, Victron SmartSolar Bluetooth enabled 75/15 MPPT5m of Black PV Cable & MC4 Connectors x 2Resettable Circuit BreakerFused Battery Cable100ah AGM BatteryVictron Battery Isolator Switch This highly efficient Victron solar 250w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. A waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging of the battery. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£478.99

160w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15

160w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs VW T6/T5/T4) Highly efficient Black German Cells This 160w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 160w Semi-Flexible Durable Black Solar Panel - dimensions: 1345 x 665 x 4 mm Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 x 5m of Black) 2 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar Panel Specifications: Aluminum reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminum fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminum reinforcement, the surface of this 180W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Simple, professional installation:This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface.This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 5kg) which is great for all vehiclesHigh resistance to salt water environment (junction box and cables underneath are protected from contact with water) and possibility to walk on the panel make it perfect for boats and yachtsSealed waterproof design ensures the panel can be used in all weather conditionsJunction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting.Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Solar panel specifications: Peak power: 160W Maximum power voltage: 20.2V Maximum power current: 7.92A Open circuit voltage: 23.9V Short circuit current: 8.40A Power allowance range: +/- 5% Solar Panel dimensions: 1345 x 665 x 4 mm Junction Box diameter: 30 mm Weight: 5.70 kg 1 x 3m high quality dual core solar cable attached (4mm cross section) MPPT Specifications The Victron 75V 15A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, in addition to an intelligent BatteryLife function .Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£580.99

Victron Enery BlueSolar MPPT 250/100 Tr VE.Can – SCC125110441

Victron Enery BlueSolar MPPT 250/100 Tr VE.Can – SCC125110441 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 99%. Flexible charge algorithm Fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more BlueSolar Charge Controllers. (VE.Direct Bluetooth Smart dongle needed) VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. Brand Victron Energy Manufacturer Part Number SCC125110441 GTIN 8719076050926 Voltage 12/24/48V Rated Charge Current 100A Nominal PV Power, 12V 1450W Max. PV Short Circuit Current 70A Max. PV Open Circuit Voltage 150V resp. 250V absolute maximum coldest conditions, 145V resp. 245V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled No Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years Country of Manufacture Malaysia

...Read more View Product

£258.99

120W Black Reinforced Semi-Flexible Solar Panel With Round Rear Junction Box And 3M Cable, With Durable Etfe Coating (German Solar Cells)

We love high quality solar products. That's why we have developed this highly durable black semi-flexible solar panel reinforced with anodised aluminium and a strong ETFE surface and made from German monocrystalline solar cells. This model also features a rear-fitted circular junction box and 3m dual core cable. This high efficiency 120W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 120W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Simple, professional installation:This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface.This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 4.30kg) which is great for all vehiclesHigh resistance to salt water environment (junction box and cables underneath are protected from contact with water) and possibility to walk on the panel make it perfect for boats and yachtsSealed waterproof design ensures the panel can be used in all weather conditionsJunction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting.Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Solar panel specifications: Peak power: 120W Maximum power voltage: 20.2V Maximum power current: 5.94A Open circuit voltage: 23.9V Short circuit current: 6.30A Power allowance range: +/- 5% Solar Panel dimensions: 1000 x 665 x 4 mm Junction Box diameter: 30 mm Weight: 4.30 kg 1 x 3m high quality dual core solar cable attached (4mm cross section)

£301.99

120W 12V Reinforced Semi-Flexible Solar Charging Kit

This high-efficiency semi-flexible 120W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:120W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)Advanced 10A solar charge controller with LCD display and powerful 2.4A dual USB outputA pair of 5m 4mm² single core solar extension cables with MC4 connectors5m of 4mm² dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminals 120W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 120W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 4.35kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 1m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc.The LCD display shows information regarding real time solar panel and battery performance, including: voltage, current, battery state of charge, and battery temperature. An energy statistics counter also displays the accumulated daily and monthly charge values (useful for comparing solar panel performance between different periods).This solar charge controller also offers the rare and highly sought-after feature of a dual USB charging output. These 5V USB ports have a total combined output of 2.4A, offering fast and powerful charging of USB compatible devices such as mobile phones, tablets, mp3 players etc.An optional 12V load (e.g. 12V lighting / fans) may also be connected directly to the solar charge controller, with various settings for night time lighting applications. In addition, this controller also offers various charging programs for different battery types, which can be easily selected by the user. In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4mm² cross section) and 5m of 4mm² dual core battery cable fitted with a fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 120WMaximum power voltage: 20.2VMaximum power current: 5.94AOpen circuit voltage: 23.9VShort circuit current: 6.30APower allowance range: +/- 5%Solar Panel Dimensions: 1025 x 665 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 4.35 kg2 x 1m of high quality single core solar cable (4mm cross² section)Male and female MC4 connectors Controller specifications:Fully automated operation and auto 12/24V selectionRated charge/discharge current: 10AMaximum solar panel input power: 160W (12V) / 320W (24V)Maximum solar panel input voltage 50VTemperature sensor for automatic compensation: -3mV/C/2V (25C)Working temperature: -25°C to +55°CSelf-consumption: max. ≤9.2mA (12V); ≤11.7mA (24V)3 pairs of terminals (solar, battery, optional load)Terminals for wire up to 4mm²Multiple mounting holes for ease of installationSize: 14.2 x 8.5 x 4.1 cmWeight: 220 g Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.The panel and charge controller are covered by a 1 year warranty. In the unlikely event that a defect is found and confirmed during this period, we guarantee that we will repair or replace all defective items. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£279.99

100W 12V Reinforced Semi-Flexible Solar Charging Kit

This high-efficiency semi-flexible 100W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:100W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)Advanced 10A solar charge controller with LCD display and powerful 2.4A dual USB outputA pair of 5m 4mm² single core solar extension cables with MC4 connectors5m of 4mm² dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminals 100W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 100W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 3.65kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 1m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc.The LCD display shows information regarding real time solar panel and battery performance, including: voltage, current, battery state of charge, and battery temperature. An energy statistics counter also displays the accumulated daily and monthly charge values (useful for comparing solar panel performance between different periods).This solar charge controller also offers the rare and highly sought-after feature of a dual USB charging output. These 5V USB ports have a total combined output of 2.4A, offering fast and powerful charging of USB compatible devices such as mobile phones, tablets, mp3 players etc.An optional 12V load (e.g. 12V lighting / fans) may also be connected directly to the solar charge controller, with various settings for night time lighting applications. In addition, this controller also offers various charging programs for different battery types, which can be easily selected by the user. In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4mm² cross section) and 5m of 4mm² dual core battery cable fitted with a fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 100WMaximum power voltage: 20.2VMaximum power current: 4.95AOpen circuit voltage: 23.9VShort circuit current: 5.25APower allowance range: +/- 5%Solar Panel Dimensions: 860 x 665 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 3.65 kg2 x 1m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Fully automated operation and auto 12/24V selectionRated charge/discharge current: 10AMaximum solar panel input power: 160W (12V) / 320W (24V)Maximum solar panel input voltage 50VTemperature sensor for automatic compensation: -3mV/C/2V (25C)Working temperature: -25°C to +55°CSelf-consumption: max. ≤9.2mA (12V); ≤11.7mA (24V)3 pairs of terminals (solar, battery, optional load)Terminals for wire up to 4mm²Multiple mounting holes for ease of installationSize: 14.2 x 8.5 x 4.1 cmWeight: 220 g Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year workmanship warranty

£279.99

200W 12V Solar Charging Kit With 20A Controller And 5M Cable (German Solar Cells)

we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.200W solar panel:This high efficiency, waterproof 200W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to to other solar panels, your existing system or 6mm extension cable (the MC4 connectors can also be cut off when wiring to the screw terminals of the solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.20A Solar charge controller:This kit includes a powerful 20A 12V/24V solar charge controller, which is designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 20A controller is the small size - only 16 x 8cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can handle up to 320W of solar power (12V system) or 640W of solar power (24V system), so the kit can be upgraded to increase the power output by adding more solar panels, without the need to buy a new controller.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 200WMaximum power voltage: 20.2VMaximum power current: 9.9AOpen circuit voltage: 23.9VShort circuit current: 10.52APower allowance range: +/- 3%Dimensions: 111 x 99.2 x 4 cmWeight: 13.3 kg8 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable (6.0mm cross section)Male and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 20AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 10mm2Size: 15.9 x 8.1 x 4.8 cmWeight: 300 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty

£169.99

80W (40W+40W) Solar Charging Kit With 10A Controller And 2 X 5M Cables (German Solar Cells)

we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in these solar panels. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.This kit includes:2 x 40W high efficiency waterproof monocrystalline solar panels, each with 5m cable and MC4 connectors10A Photonic Universe solar charge controller 2 x 40W solar panels:This 80W system is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).Each panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will provide years and years of consistent, free power. The waterproof design ensures that the panels can be used in all weather conditions.These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Specifications (per solar panel):Peak power: 40WMaximum power voltage: 20.2VMaximum power current: 1.98AOpen circuit voltage: 23.9VShort circuit current: 2.10APower allowance range: +/- 3%Dimensions: 705 x 345 x 25mmWeight: 3.5 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors attached (can be cut off when wiring to the solar controller) Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.This product is covered by a 1 year warranty Wiring guide for Solar Panel Kits in Series

...Read more View Product

£693.99

270W Pro Semi-Flexible Solar Panel - 5-Year Warranty

Now with a 5-Year Warranty! This high-efficiency, waterproof 270W monocrystalline solar panel is the one of the largest semi-flexible solar panels available on the UK market. It is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners and even zipping. Product features: Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel that can be walked on Incredibly light (only 4.75kg) and very thin (just 2mm) which is great for motorhome and caravan roofs High resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications 100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified. The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter). The fibreglass plastic used in this solar panel is very strong and durable. When the solar panel is mounted on to a rigid surface, it is possible to walk on the solar panel in soft shoes (to prevent accidental scratches), which makes it the perfect choice for mounting on a boat deck. The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 compatible connectors which can be used for easy connectivity to your existing system, linking several panels together or for connecting a 4mm Cable. Solar panel specifications: Peak power: 230W Maximum power voltage: 25V Maximum power current: 9.8A Open circuit voltage: 34.9V Short circuit current: 9.7A Dimensions: 1595 x 1020 x 2 mm Weight: 4.75 kg

£54.99

20W 12V Polycrystalline Solar Panel With 2M Cable

This waterproof high efficiency 20W solar panel is perfect for permanent outdoor use to provide free power either directly, such as powering a fan or lights, or for charging a 12V battery to then power hundreds of devices such as in a shed, boat or camper van. The long-lasting, high-efficiency, polycrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. The panel comes with 2m cable which is attached to the waterproof junction box at the back. Please note that the junction box goes about 0.5cm beyond the frame, so there must be some space left between the frame and flat surface when mounting the panel (note 1.0 - 1.5cm space under the panel typically recommended for cooling). If you are planning to use this solar panel for charging a 12V battery: please note this panel requires a solar charge controller / regulator to charge a 12V battery. If you don't have one and would like to buy it, please check our shop category with solar charge controllers. If you already have one of our 20W solar panels or kits with a solar controller, you can easily upgrade the power of your kit to 40W by adding this panel in parallel to the existing 20W solar panel (connecting 2 panels: "+" to "+", "-" to "-" and then to the solar controller). Solar panel specifications: Peak power: 20W Maximum power voltage: 17.5V Maximum power current: 1.14A Open circuit voltage: 21.6V Short circuit current: 1.23A Power allowance range: +/- 3% Dimensions: 485 x 345 x 25 mm Weight: 2.0 kg 4 mounting holes 2m cable attached

...Read more View Product

£138.99

High Efficiency 40A Mppt Solar Charge Controller For Solar Panels Up To 520W (12V) / 1040W (24V) Up To 100V

MPPT Technology:This solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range - this controller can work not only with standard off-grid 12/24V solar panels, but also with multiple panels with voltage up to 100V. The maximum combined input solar power allowed for this controller is 520W for a 12V battery system or 1040W for a 24V system. In particular, this controller will significantly increase efficiency of a solar system where the solar panel voltage is much higher than the battery voltage (e.g. charging a 12V battery with a 36V solar panel).Full system protection:This charge controller features a comprehensive set of electronic protection functions to ensure the maximum possible efficiency of your solar system. These include: reverse current prevention at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, solar panel over voltage, over load, short circuit and reverse polarity protection. The controller also has self-diagnostic capability and highlights any system errors using advanced fault-targeting technology. Lithium Battery charging:This solar charge controller is compatible with lithium batteries when a lithium battery charging program is selected using PC software (see below for more details), and can also set the charging parameters for lithium batteries.Advanced system monitoring:The controller automatically recognises 12/24V battery systems (note a battery should always be connected to the controller first before connecting a solar panel)Built-in LCD screen shows real-time charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energyEasy to use buttons allow the user to manually select the battery type (sealed, flooded or gel) and program load settings (e.g. set timers for lighting, fans, pumps etc).Current limiting function (40A) allows the possibility of adding more solar panels to your solar system in the future Multiple connectivity optionsThis model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only). If using the RJ45 to USB cable, the user also has the option to create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable).Using one of these communication methods, the user will gain access not only to the standard charging parameters already shown via the built-in LCD screen, but also additional information such as min/max voltages, temperature, protection cut off voltages, diagnostics and other information. If required the user will also be able to amend the battery capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), and more.In addition to the built-in temperature sensor and intelligent heat-dissipating design of this controller, there is also a socket for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process. (Inbuilt temperature sensor is not enabled for lithium batteries). Controller specifications: The most advanced MPPT technology to ensure high efficiency (>95%) of your solar system Fully automated operation and auto 12/24V selection for lead acid batteries 3 pairs of terminals (solar panel, battery, load) for wires up to 16mm2 Maximum solar panel voltage 100V Maximum solar panel power 520W (12V) / 1040W (24V) Temperature sensor for automatic compensation (-3mV/°C/2V) (auto temperature compensation not enabled for lithium batteries) Comprehensive electronic protection features Communication port: RS485/RJ45 interface Grounding: negative common ground Current limiting function (40A) Self-consumption: <12mA Working temperature: -25°C to +50°C Size: 25.2 x 18 x 6.3 cm Mounting dimensions: 21 x 17.1 cm Weight: 1.65kg Multiple mounting holes (5mm diameter) for ease of installation

...Read more View Product

£469.99

Victron Smartsolar Mppt 150/100 100A Solar Charge Controller

Victron Smartsolar Mppt 150/100 100A Solar Charge Controller This Victron 150V 100A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. SmartSolar MPPT controllers uniquely feature built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, along with a programmable relay with various signalling options.Ultrafast MPPT Technology:This 100A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, reverse polarity, overvoltage, overcurrent and reverse current, as well as battery overvoltage, reverse polarity and overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional LCD display:Alternatively, this SmartSolar controller features a connection area for an optional Plug-in LCD display (sold separately). Simply remove the rubber seal on the face of the controller and plug in the removeable LCD display to access a range of monitoring and programming functions. This display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data and any system faults. The user can also set their own charging parameters for a user-defined battery type, personalise settings for the load, charging stages and more.Programmable relay:This solar charge controller has programmable relay contacts, which can be programmed (e.g. with a smartphone, via the app) to start a generator or to send a low battery signal which will activate an audible alarm.Other features:The Victron SmartSolar MPPT 150/100 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36* / 48V selection- 2 pairs of terminals (solar panel, battery) for wires up to 35mm2- Inbuilt bluetooth- Programmable relay: AC rating: 240VAC /4A , DC rating: 4A up to 35VDC, 1A up to 60VDC- Max solar panel voltage: 150V- Max solar panel power: 1450W (12V) / 2900W (24V) / 4350W (36V) / 5800W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -48mV / -64mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: <35mA (12V) / <20mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 216 x 295 x 103 mm- Mounting dimensions: 273 x 144 mm- Weight: 4.5kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£299.99

Victron Energy SmartSolar MPPT 150/60-Tr – SCC115060211

Victron Energy SmartSolar MPPT 150/60-Tr – SCC115060211 This Victron 150V 60A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. SmartSolar MPPT controllers uniquely feature built-in Bluetooth, to allow remote system monitoring via any Bluetooth enabled device, along with a programmable relay with various signalling options.Ultrafast MPPT Technology:This 60A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, reverse polarity, overvoltage, overcurrent and reverse current, as well as battery overvoltage, reverse polarity and overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional LCD display:Alternatively, this SmartSolar controller features a connection area for an optional Plug-in LCD display (sold separately). Simply remove the rubber seal on the face of the controller and plug in the removeable LCD display to access a range of monitoring and programming functions. This display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data and any system faults. The user can also set their own charging parameters for a user-defined battery type, personalise settings for the load, charging stages and more.Optional control panel:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage. Programmable relay:This solar charge controller has programmable relay contacts, which can be programmed (e.g. with a smartphone, via the app) to start a generator or to send a low battery signal which will activate an audible alarm.Other features:The Victron SmartSolar MPPT 150-60 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.Specifications:- The most advanced MPPT technology to ensure high efficiency (> 95%) of your solar system- Fully automated operation and auto 12 / 24 / 36* / 48V selection- 2 pairs of terminals (solar panel, battery) for wires up to 35mm2- Inbuilt bluetooth- Programmable relay: AC rating: 240VAC /4A , DC rating: 4A up to 35VDC, 1A up to 60VDC- Max solar panel voltage: 150V- Max solar panel power: 860W (12V) / 1720W (24V) / 2580W (36V) / 3440W (48V)- Temperature sensor for automatic compensation (-16mV / -32mV / -48mV / -64mV / °C)- Comprehensive electronic protection features- Communication port: RS232 / TTL for VE Direct accessories- Self-consumption: <35mA (12V) / <20mA (48V)- Working temperature: -30°C to +60°C- IEC/EN certified- Enclosure: IP43 (electronic components) / IP22 (connection area)- Pollution Degree rating: PD3- Dimensions: 185 x 250 x 95 mm- Weight: 3kg- 4 x mounting holes (8mm diameter) for ease of installation

...Read more View Product

£38.54

Victron Polycrystalline panel 30W-12V Poly 665x350x25mm series 4a SPP040301200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£30.07

Victron Polycrystalline panel 20W-12V Poly 440x350x25mm series 4a SPP040201200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

SunPower flexible Solar panel kit with Victron SmartSolar MPPT - 110W

SunPower flexible solar panel kit with Victron SmartSolar MPPT - 110W High Power and Flexible suitable for curved roofs found on Caravans, Motorhomes, Campervans & Boats Made with SunPowers highest power Gen II back contact cells, SunPowers flexible panels deliver the highest power output and the highest charging capacity in their product class. SunPowers panels are constructed with top-grade, light-weight polymer materials, allowing for easy transport, installation and panel flexing up to 30 degrees. Designed for Toughness The SunPower MaxeonÂ® Solar Cell is the only cell built on a solid copper foundation. Flexible panels made with SunPower cells are resistant to power loss via cracking and corrosion, unlike conventional cells, which are much more likely to lose power when bent or subjected to a moist environment. SunPower flexible panels are the 1 choice for customers due of the combination of high power and cell ruggedness. Easy and Low Cost Installation Supplied with Victron 10a MPPT solar regulator , 5mtrs solar cable , cable entry gland and Sikaflex adhesive SPR-E-Flex-110 Nominal power: 110 Watts Power tolerance: +6 / -3 Watts Vmp: 17.1 Volts Voc: 21.4 Volts Imp: 5.9 Amps Isc: 6.3 Amps Module efficiency: 18.8% Dimensions: 45.9" x 21.9" x 0.8" Weight: 4.4 lbs (2 kg) Warranty (All models): 5 years limited power warranty of 80% of the minimum specified power rating. Victron Energy Smart Solar Controller MPPT 75/10 Brand Victron Energy Manufacturer Part Number SCC075010060R Battery Voltage 12/24 Auto Select Rated Charge Current 10A Nominal PV Power, 12V 145W Nominal PV Power, 24V 290W Max. PV Short Circuit Current 13A Maximum PV Open Circuit Voltage 75V Efficiency 98% Charge Algorithm Multi-stage adaptive Data Communication Port VE.Direct IP Rating IP43 (electronic components), IP22 (connection area) Dimensions H100 x W113 x D40mm Weight (kg) 0.5 Warranty 5 Years Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£769.99

440W MCS certified black semi-flexible solar panel kit

440w MCS Certified Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/30 (5-year panel warranty) This 440w Flexible Durable MCS Certified Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and efficient charging of your battery. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 440w Flexible Durable Solar Panel with MCS Certification Dimensions: 1940 x 1137 x 3.4 mm Victron Energy SmartSolar MPPT 100/30 Sikaflex 522 Caravan / Motorhome Adhesive 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 5 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar panel specifications: Peak power: 440W Maximum power voltage: 34.48V Maximum power current: 12.77A Open circuit voltage: 41.73V Short circuit current: 13.76A Protection: IP68 Dimensions: 1940 x 1137 x 3.4 mm Weight: 9.0 kg 2 x 0.3m of 4.0m² solar cable attached The FMCS-440M is a cutting-edge 440W MCS-certified semi-flexible monocrystalline solar panel that redefines efficiency and adaptability. Built with 182mm silicon wafers, PERC technology, and half-cut cells, this panel maximises power output while reducing energy losses. Its innovative design ensures exceptional durability, lightweight construction, and superior performance, even in challenging conditions. Perfect for curved rooftops, weak load-bearing surfaces, and corrugated metal roofs, the FMCS-440M is the ideal solution for residential, commercial, and industrial solar applications.

...Read more View Product

£819.99

240w Flexible Durable ETFE Solar Panel Kit with Victron SmartSolar MPPT 100/20

240w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/20 - (These kits are perfect for pop top roofs VW T6/T5/T4). Highly efficient German Cells This 240w Flexible Durable ETFE Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/20 charge controller ensures maximum power output and efficient charging of your battery. The ETFE material of the solar panel makes it extremely durable and resistant to extreme weather conditions. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 240w Flexible Durable Solar Panel with ETFE Coating Dimensions: 1434 x 1020 x 2 mm Victron Energy SmartSolar MPPT 100/20 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) Cable Entry Roof Gland 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 3 year warranty on the Solar Panel 5 year warranty on Victron MPPT Solar Panel Specifications: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 5kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 240W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 240W Maximum power voltage: 27.6V Maximum power current: 9A Open circuit voltage: 33.1V Short circuit current: 9.4A Dimensions: 1434 x 1020 x 2 mm Weight: 4.75 kg MPPT Specifications The Victron 100V 20A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent battery life function.Ultrafast MPPT Technology:This 20A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high-speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 100/20 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£855.99

300w Semi-Flexible Solar kit - 2 x 150w Black panels and Victron MPPT

300W Semi-Flexible Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats (2 x 150w Semi-Flexible Panels) This 300w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. Panel sizes are 1550 x 510mm each • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m extension leads Full Kit with 2 * 150W Monocrystalline all black panels, Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/30 MPPT charge controller, 5m of Black PV Cable (x2) & MC4 Connectors.1 x Ressetable Circuit Breaker1 x MPPT to Battery cable set with in-line fuse This highly efficient flexible 300w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Solar panel specifications: Peak power: 150W Maximum power voltage: 18.8V Maximum power current: 7.98A Open circuit voltage: 22.0V Short circuit current: 8.38A Dimensions: 1550 x 510 x 3 mm Weight: 2.55 kg

...Read more View Product

430W Sharp NU-JC430B Full Black Monocrystalline Solar panel with high-efficiency TOPCon cells

This high quality full black 430W solar panel from leading solar panel manufacturer Sharp, which has over 60 years of experience with solar technology and over 50 million solar panels installed all over the world. High efficient TOPCon (Tunnel Oxide Passivated Contact) solar cells offer significant benefits, including higher efficiency due to improved passivation and reduced recombination losses, better performance at high temperatures, and enhanced long-term stability. The half-cut cell construction decreases internal losses, reduces risk of hotspots and improves performance in shaded conditions. This MCS certified panel is perfect for a wide variety of applications, from grid-tie household systems to off-grid installations where mains power is limited or unavailable such as boats, caravans, campervans, cabins or glamping huts. These high-power panels are ideal for large systems where the time and expense of fitting a high wattage array needs to be minimised. The robust design of the panel is IP68 (waterproof) rated, and tested for resistance against PID, salt mist, ammonia, heavy snow, dust and sand. This thorough testing ensures a long service life even in harsh marine or wilderness conditions. A pair of male / female MC4 connectors are crimped on the end of the cable for easy waterproof connection to other solar panels, extension leads or your existing system. With up to a 25-year product guarantee for EU countries (12-year globally), and up to a 30-year power output guarantee, you can be confident in the quality, durability and longevity of this premium solar panel. UK mainland deliveries only. For non-mainland addresses (including the Scottish Highlands) please contact us for a delivery quote. Specifications: Peak power: 430W Maximum power voltage: 32.73V Maximum power current: 13.14A Open circuit voltage: 39.09V Short circuit current: 14.01A Power tolerance: 0/+5% Dimensions: 1722 x 1134 x 30 mm Weight: 20.7 kg Mounting holes for ease of installation 2 x 1.25m of high-quality single core solar cable Male and female MC4 waterproof connectors The product is covered by up to a 25-year product guarantee provided by Sharp Electronics. In addition, solar cells are guaranteed to produce at least 99% of nominal power in the first year after purchase and less than 0.4% degradation of nominal power each year after until 30 years after purchase, for a minimum of 87.5%.

...Read more View Product

£469.99

125W flexible CIGS solar panel with self-adhesive backing (Made in Sweden)

Introducing our fully flexible SELM (CIGS) solar panels that are TUV-certified and manufactured in Sweden to the highest European quality standards. They are constructed using CIGS (Copper Indium Gallium Selenide) thin-film technology for maximum flexibility and performance under mechanical stresses. SELM panels are built for durability and efficiency, they offer unmatched performance, even in shaded conditions, and are one of the most eco-friendly options on the market. These products are lightweight and ideal for applications requiring flexibility and adaptability, such as curved surfaces and modern architectural projects, industrial projects, residential rooftops, and mobile setups. Robust and Long-Lasting Technology: This panel comes with an impressive 10-year product warranty and a 25-year performance warranty, ensuring long-term reliability and peace of mind. It is designed to withstand the toughest conditions while delivering consistent energy output over time. Shatterproof and Crackproof Construction: Unlike the more common crystalline solar panels, a CIGS panel is fully flexible and walkable, meaning it can endure mechanical impacts and the expansion and contraction of roof materials without suffering from microcracks. It is built to last, even under the most extreme conditions. Superior Shading Performance: This SELM panel boasts an exceptional ability to handle shading. With bypass diodes between every cell, it outperforms conventional solar panels (which typically have only one diode per 30-50% of the area) in partially shaded conditions, delivering 10-20% higher annual energy yield. Industry-Leading Sustainability: These solar panels have one of the lowest carbon footprints in the industry, producing only 4-6 g/kWh of CO2 emissions during their lifecycle—90% less than standard crystalline solar panels, which emit 40-60 g/kWh. Streamlined Installation: Installation is easy with the strong self-adhesive backing that allows for quick and easy setup on a wide range of surfaces, including bitumen roofs and roofing felts. There is no need for complex mounting hardware—just peel and stick. Sleek Aesthetic Design: The full-black construction gives the SELM panel a modern, elegant look, making it ideal for rooftops where aesthetics matter. Its sleek design ensures it blends seamlessly with your roof for a discreet and attractive installation. Solar panel specifications: Peak power: 125W Maximum power voltage: 18.9V Maximum power current: 6.6A Open circuit voltage: 22.9V Short circuit current: 7.6A Dimensions: 3077 x 358 x 2mm Weight: 3.0kg This product comes with a 10 year product warranty which covers material and production defects and a 25-year performance warranty.

...Read more View Product

£449.99

120W flexible CIGS solar panel with self-adhesive backing (Made in Sweden)

Introducing our fully flexible SELM (CIGS) solar panels that are TUV-certified and manufactured in Sweden to the highest European quality standards. They are constructed using CIGS (Copper Indium Gallium Selenide) thin-film technology for maximum flexibility and performance under mechanical stresses. SELM panels are built for durability and efficiency, they offer unmatched performance, even in shaded conditions, and are one of the most eco-friendly options on the market. These products are lightweight and ideal for applications requiring flexibility and adaptability, such as curved surfaces and modern architectural projects, industrial projects, residential rooftops, and mobile setups. Robust and Long-Lasting Technology: This panel comes with an impressive 10-year product warranty and a 25-year performance warranty, ensuring long-term reliability and peace of mind. It is designed to withstand the toughest conditions while delivering consistent energy output over time. Shatterproof and Crackproof Construction: Unlike the more common crystalline solar panels, a CIGS panel is fully flexible and walkable, meaning it can endure mechanical impacts and the expansion and contraction of roof materials without suffering from microcracks. It is built to last, even under the most extreme conditions. Superior Shading Performance: This SELM panel boasts an exceptional ability to handle shading. With bypass diodes between every cell, it outperforms conventional solar panels (which typically have only one diode per 30-50% of the area) in partially shaded conditions, delivering 10-20% higher annual energy yield. Industry-Leading Sustainability: These solar panels have one of the lowest carbon footprints in the industry, producing only 4-6 g/kWh of CO2 emissions during their lifecycle—90% less than standard crystalline solar panels, which emit 40-60 g/kWh. Streamlined Installation: Installation is easy with the strong self-adhesive backing that allows for quick and easy setup on a wide range of surfaces, including bitumen roofs and roofing felts. There is no need for complex mounting hardware—just peel and stick. Sleek Aesthetic Design: The full-black construction gives the SELM panel a modern, elegant look, making it ideal for rooftops where aesthetics matter. Its sleek design ensures it blends seamlessly with your roof for a discreet and attractive installation. Solar panel specifications: Peak power: 120W Maximum power voltage: 18.2V Maximum power current: 6.6A Open circuit voltage: 22.8V Short circuit current: 7.6A Dimensions: 2129 x 516 x 2mm Weight: 3.0kg This product comes with a 10 year product warranty which covers material and production defects and a 25-year performance warranty.

...Read more View Product

£268.99

120W black semi-flexible fibreglass solar panel with round rear junction box and 3m cable, with durable ETFE coating

This highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface is made from monocrystalline solar cells. This model also features a rear-fitted circular junction box and 3m dual core cable. This high efficiency 120W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 2.14kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Junction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 120W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 5-busbar solar cells: This panel also features new generation 5-busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Simple, professional installation: This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface. This solar panel has a unique black backing, making it ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Solar panel specifications: Peak power: 120W Maximum power voltage: 20.5V Maximum power current: 5.86A Open circuit voltage: 24.0V Short circuit current: 6.15A Dimensions: 1000 x 665 x 2 mm Weight: 2.14 kg

...Read more View Product

£259.99

100W black semi-flexible fibreglass solar panel with durable ETFE coating

This highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface is made from monocrystalline solar cells. This high efficiency 100W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) Black backing makes the solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces The panel is incredibly light (only 1.90kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 100W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 9-busbar solar cells: This panel also features new generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. All-black design: This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 100W Maximum power voltage: 18.2V Maximum power current: 5.50A Open circuit voltage: 21.1V Short circuit current: 5.93A Dimensions: 1010 x 540 x 2 mm Weight: 1.90 kg This product comes with a 3 year workmanship warranty which covers material and production defects

...Read more View Product

£369.99

180W black semi-flexible fibreglass solar panel with round rear junction box and 3m cable, with durable ETFE coating

This highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface is made from monocrystalline solar cells. This model also features a rear-fitted circular junction box and 3m dual core cable. This high efficiency 180W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 3.15kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Junction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 180W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 5-busbar solar cells: This panel also features new generation 5-busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Simple, professional installation: This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface. This solar panel has a unique black backing, making it ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Solar panel specifications: Peak power: 180W Maximum power voltage: 20.5V Maximum power current: 8.79A Open circuit voltage: 24.0V Short circuit current: 9.22A Dimensions: 1470 x 665 x 2 mm Weight: 3.15 kg This product comes with a 3 year workmanship warranty which covers material and production defects

...Read more View Product

£338.99

160W Black Semi-flexible Fibreglass Solar Panel With Round Rear Junction Box And 3M Cable, With Durable Etfe Coating

This highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface is made from monocrystalline solar cells. This model also features a rear-fitted circular junction box and 3m dual core cable. This high efficiency 160W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 2.89kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Junction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 160W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 5-busbar solar cells: This panel also features new generation 5-busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Simple, professional installation: This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface. This solar panel has a unique black backing, making it ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Solar panel specifications: Peak power: 160W Maximum power voltage: 20.5V Maximum power current: 7.81A Open circuit voltage: 24.0V Short circuit current: 8.20A Dimensions: 1350 x 665 x 2 mm Weight: 2.89 kg This product comes with a 3 year workmanship warranty which covers material and production defects

£899.00

500W Monocrystalline Solar kit with SmartSolar 100/50 MPPT, Mounts, Cables & MC4

500W Victron Energy Solar Panel Kit. Perfect for Campervans, Motorhomes & Boats (2 x 250w Panels) This 500w Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/50 charge controller ensures maximum power output and battery charging efficiency. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, yachts, motorhomes and other off-grid applications. Panel sizes are 1390x990x30mm • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. • High-performance bypass diodes minimize the power drop caused by shade. • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. • A sturdy, anodized aluminum frame allows modules to be easily roof-mounted with a variety of standard mounting systems. • The highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance. • 1m pre-wired quick-connect system with MC4 (PV-ST01) connectors with additional 5m extension leads Full Kit with 2 * 250W Monocrystalline panels, 2 * mount sets (optional), Cable entry Gland, Victron SmartSolar Bluetooth enabled 100/50 MPPT charge controller, 5m of Black PV Cable (x2) & MC4 Connectors.1 x Ressetable Circuit Breaker1 x MPPT to Battery cable set with in-line fuse Mounts available (optional): 6 Piece corner Mounts (White)6 Piece corner Mounts (Black)Solar Panel Aluminium Z Brackets This highly efficient Victron solar 500w solar panel kit is ideal for Caravans, Boats, Motorhomes, Campers, sheds and many more applications. Harness the power from the sun to provide the power you need on the move. Ideal for charging 12v batteries and directly powering 12v devices and appliances The long-lasting, high-efficiency monocrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions. This kit comes with everything you need to get going. All the leads, fixing brackets and solar charge controller to prevent overcharging your batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability. Wiring guide for Solar Panel Kits in Series

...Read more View Product

£329.99

160W Black Semi-Flexible Fibreglass Solar Panel with Durable ETFE Coating

This highly durable black semi-flexible solar panel is reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This high-efficiency 160W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and backup solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) Black backing makes the solar panel ideal for discreet and aesthetically pleasing installation on dark-coloured roofs, vehicles or mounting surfaces The panel is incredibly light (only 2.96kg) and very thin (just 2mm) which is great for all vehicles High resistance to saltwater environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 160W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required. High quality 5-busbar solar cells: This panel also features new generation 5-busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. All-black design: This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss Solar panel specifications: Peak power: 160W Maximum power voltage: 20.5V Maximum power current: 7.81A Open circuit voltage: 24.0V Short circuit current: 8.20A Dimensions: 1380 x 665 x 2 mm Weight: 2.96 kg

£359.99

150w Semi Flexible Fibreglass Solar Panel with round rear junction box

This highly durable black semi-flexible solar panel is reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This model also features a rear-fitted circular junction box and 3m dual core cable. This high-efficiency 150W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Specially textured surface significantly reduces light reflection and improves performance in low-light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 2.68kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions The junction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting. Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 150W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required. High quality 9-busbar solar cells: This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Simple, professional installation: This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface. This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Solar panel specifications: Peak power: 150W Maximum power voltage: 19.8V Maximum power current: 7.58A Open circuit voltage: 23.0V Short circuit current: 8.03A Dimensions: 1080 x 710 x 2 mm Weight: 2.68 kg

...Read more View Product

£899.99

300w Flexible Durable ETFE Solar Panel Kit with Victron SmartSolar MPPT 100/20

300w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 100/30 - (These kits are perfect for pop top roofs VW T6/T5/T4). Highly efficient German Cells This 300w Flexible Durable ETFE Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 100/30 charge controller ensures maximum power output and efficient charging of your battery. The ETFE material of the solar panel makes it extremely durable and resistant to extreme weather conditions. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 300w Flexible Durable Solar Panel with ETFE Coating Dimensions: 1756 x 1020 x 2 mm Victron Energy SmartSolar MPPT 100/30 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) Cable Entry Roof Gland 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 3 year warranty on the Solar Panel 5 year warranty on Victron MPPT This high-efficiency, waterproof 300W monocrystalline solar panel is one of the largest semi-flexible solar panels available on the UK market. It is perfect for permanent outdoor use to provide free electricity for charging 12V or 24V battery / battery bank to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners and even zipping. Product features: Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Incredibly light (only 6kg) and very thin (just 2mm) which is great for motorhome and caravan roofs High resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications 100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified. The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter). The fibreglass plastic used in this solar panel is very strong and durable. Soft and sealed edges of the solar panel make it resilient to mechanical impact on the sides and help avoid long term delamination. Solar panel specifications: Peak power: 300W Maximum power voltage: 33.8V Maximum power current: 9A Open circuit voltage: 41.1V Short circuit current: 9.5A Dimensions: 1756 x 1020 x 2 mm Weight: 6kg MPPT Specifications The Victron 100V 30A MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent battery life function.Ultrafast MPPT Technology:This 30A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high-speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Optional Remote LCD Display:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel, battery and load, as well as 30 day performance data. The user can also adjust the load settings and specifically set the duration and voltage of each charging stage.Other features:The Victron SmartSolar MPPT 100/20 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£504.99

150w Flexible Durable Solar Panel Kit with Victron SmartSolar MPPT 75/15

150w Flexible Durable Solar Panel Complete Kit with Victron Energy SmartSolar MPPT 75/15 - (These kits are perfect for pop top roofs) Highly efficient German Cells with a Durable ETFE Coating This 150w Flexible Durable Solar Panel Kit is designed for off-grid, campervans, motorhomes and yachts/boats. The included Victron SmartSolar MPPT 75/15 charge controller ensures maximum power output and efficient charging of your battery. The panel is also flexible, making it easy to install on various surfaces. This kit is perfect for those looking to set up a reliable and efficient solar power system for campervan conversions, boats, motorhomes and other mobile applications. Kit Contents 150w Semi-Flexible Durable Solar Panel Dimensions: 1110 x 710 x 2 mm Victron Energy SmartSolar MPPT 75/15 Sikaflex 522 Caravan / Motorhome Adhesive Pair of MC4 Connectors 10 Metres of 6mm PV Cable ( 2 * 5m Black) Double entry Roof Gland 1 x Resettable Circuit Breaker 1 x MPPT to Battery Cable set with In-Line Fuse 3-year warranty on the Solar Panel 5-year warranty on Victron MPPT Solar panel specifications: Peak power: 150W Maximum power voltage: 19.8V Maximum power current: 7.58A Open circuit voltage: 23.4V Short circuit current: 8.03A Dimensions: 1110 x 710 x 2 mm Weight: 2.85 kg Product features: Robust construction using plastic reinforced with glass fiber creates a sturdy and durable solar panel Special textured surface significantly reduces light reflection and improves performance in low-light and cloudy conditions The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The panel is incredibly light (only 2.85kg) and very thin (just 2mm) which is great for all vehicles High resistance to saltwater environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fiberglass reinforcement, the surface of this 150W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High-quality 9-busbar solar cells: This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and can extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). MPPT Specifications The Victron 75V 15amp MPPT controller comes from the intelligent SmartSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. This SmartSolar MPPT controller uniquely features built-in Bluetooth, to allow remote system monitoring via any Bluetooth-enabled device, in addition to an intelligent BatteryLife function.Ultrafast MPPT Technology:This 15A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature.This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as battery reverse polarity, load short circuit, low-voltage load disconnect and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators.Intelligent 'BatteryLife' function:To prevent complete discharge of the battery and avoid potentially permanent damage, this controller is equipped with the Victron BatteryLife function; a state-of-the-art feature designed to extend the lifetime of the battery by monitoring and controlling the output of excessive loads. Using an intelligent algorithm, the controller will continuously monitor the battery state of charge, and if required (e.g. during periods of poor weather), will gradually adjust the load disconnect threshold until a full 100% recharge is consistently achieved on a weekly basis. Alternatively, the load voltage disconnect point can be manually configured to your preferred level, using the VictronConnect software (see below).Inbuilt Bluetooth:This SmartSolar charge controller features built-in Bluetooth which allows the user to easily connect to any Bluetooth enabled device, such as a mobile phone, tablet or iPad in order to access the VictronConnect App (no additional Bluetooth dongle required). The mobile app unlocks numerous possibilities for advanced programming and remote monitoring of your Victron SmartSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.Load configuration: Option to choose from one of the pre-set load management programs or create a user-defined program. Includes a streetlight function to control the duration and brightness of nighttime lighting.The VictronConnect App is also available to download as a PC version, for computers without bluetooth connectivity. If you would like to use the PC version of the app to monitor/program your SmartSolar system, this controller can be connected to your PC via a VE Direct USB cable.Other features:The Victron SmartSolar MPPT 75/15 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

£338.99

150W Black Semi-Flexible Fibreglass Solar Panel with Durable ETFE Coating

At Van Junkies we love high-quality solar products. That's why we have developed this highly durable black semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This high-efficiency 150W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and backup solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Special textured surface significantly reduces light reflection and improves performance in low-light and cloudy conditions The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) Black backing makes the solar panel ideal for discreet and aesthetically pleasing installation on dark-coloured roofs, vehicles or mounting surfaces The panel is incredibly light (only 2.85kg) and very thin (just 2mm) which is great for all vehicles High resistance to saltwater environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 150W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. High quality 9-busbar solar cells: This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5-busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. All-black design: This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark-coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Solar panel specifications: Peak power: 150W Maximum power voltage: 19.8V Maximum power current: 7.58A Open circuit voltage: 23.4V Short circuit current: 8.03A Dimensions: 1110 x 710 x 2 mm Weight: 2.85 kg

...Read more View Product

£636.99

Victron 185w Solar Panel Kit with 800w Inverter

Complete 185W Victron Energy Solar Panel Kit with 800w Inverter. Perfect for Campervans, Motorhomes & Boats. (This kit does not include Batteries) This kit is ideal to provide solar charging and 230v power for campervans, motorhomes, yachts, boats, cabins and static caravans that need a small amount of 230v power to power appliances such as lights, chargers and fans. Kit Includes: 185w Victron Monocrystalline Solar Panel ( 1448mm x 668mm )Victron 75/15 Smartsolar MPPT Charge ControllerVictron Phoenix 800kva Inverter6 Piece Roof Mount KitDouble Entry Roof Gland50amp Switchable Circuit Breaker5m 6mm Solar Extension Cables with MC4 Connectors20amp Fused MPPT to Battery Cables2m of Red & 2m of Black 25mm Battery Cable2 x BusBarsBattery Lugs What will 185w power? The 185w Victron solar panel is super efficient and given reasonable weather conditions will keep up with the average usage of the following 12v Appliances: LED Lighting - 15w USB Charging - 18w 40-60 Litre Fridge - 60w Roof Fan - 25w Diesel Heater - 30w 12v TV - 40w What 230v Appliances will the Inverter power? Laptop Charger - 80w PS5 / XBox - 250w 230v TV - 60w Projector - 50w Need to modify this kit or ask a question? GET IN TOUCH Wiring Diagram

...Read more View Product

£709.99

300W Semi-Flexible Solar Panel With Rear Junction Box (Made In Austria)

This high-efficiency, waterproof 300W monocrystalline solar panel is one of the largest semi-flexible solar panels available on the UK market. it is perfect for permanent outdoor use to provide free electricity for charging 12V or 24V battery/battery bank to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners and even zipping. This particular model features the junction box and cables on the rear side of the panel to create a completely level surface and professional finish after installation. Please note that in order for this panel to be flush mounted, it is necessary to create a recess in the roof/surface on which the panel is to be mounted. Product features: The special textured surface which significantly reduces the light reflection and improves performance in low light and cloudy conditions Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Incredibly light (only 6kg) and very thin (just 2mm) which is great for motorhome and caravan roofs High resistance to saltwater environments and a sealed waterproof design make this solar panel ideal for boats and marine applications The junction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables 100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified. The textured surface of this panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter). The fiberglass plastic used in this solar panel is very strong and durable. Soft and sealed edges of the solar panel make it resilient to mechanical impact on the sides and help avoid long-term delamination. The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross-section) with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 300W Maximum power voltage: 33.8V Maximum power current: 9A Open circuit voltage: 41.1V Short circuit current: 9.6A Dimensions: 1756 x 1020 x 2 mm Weight: 6kg

...Read more View Product

£599.99

270W Semi Flexible Solar Panel with rear junction box (MADE IN AUSTRIA)

Now with 5 year Warranty! This semi-flexible, high-efficiency, waterproof 270W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V or 24V battery / battery bank to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners and even zipping. This particular model features the junction box and cables on the rear side of the panel to create a completely level surface and professional finish after installation. Please note that in order for this panel to be flush mounted, it is necessary to create a recess in the roof/surface on which the panel is to be mounted. Product features: Special textured surface which significantly reduces the light reflection and improves performance in low light and cloudy conditions Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Incredibly light (only 5.4kg) and very thin (just 2mm) which is great for motorhome and caravan roofs High resistance to salt water environments and a sealed waterproof design make this solar panel ideal for boats and marine applications Junction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables 100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified. The textured surface of this panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter). The fibreglass plastic used in this solar panel is very strong and durable. Soft and sealed edges of the solar panel make it resilient to mechanical impact on the sides and help avoid long term delamination. The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 270W Maximum power voltage: 30.4V Maximum power current: 9.1A Open circuit voltage: 37.1V Short circuit current: 9.6A Dimensions: 1595 x 1020 x 2 mm Weight: 5.4 kg

...Read more View Product

£689.99

300W Mono Fibreglass Semi-Flexible Solar Panel with 5-Year Warranty

Now with 5 year Warranty! This high-efficiency, waterproof 300W monocrystalline solar panel is one of the largest semi-flexible solar panels available on the UK market. It is perfect for permanent outdoor use to provide free electricity for charging 12V or 24V battery / battery bank to power various applications. The panel is ideal for flat or curved roofs, such as on boats, caravans, motorhomes, RVs etc as it can easily fit to the shape of the roof when mounted. It is normally fitted to a roof using an adhesive (not included), but it can also be secured with self-tapping screws, tenax fasteners and even zipping. Product features: Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Incredibly light (only 6kg) and very thin (just 2mm) which is great for motorhome and caravan roofs High resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications 100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified. The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter). The fibreglass plastic used in this solar panel is very strong and durable. Soft and sealed edges of the solar panel make it resilient to mechanical impact on the sides and help avoid long term delamination. The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 compatible connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 300W Maximum power voltage: 33.8V Maximum power current: 9A Open circuit voltage: 41.1V Short circuit current: 9.5A Dimensions: 1756 x 1020 x 2 mm Weight: 6kg

...Read more View Product

£469.00

NDS Energy Semi Flexible Solar Panel 12V 195W (Front Junction Box) - LSE195BF

NDS Energy Semi Flexible Solar Panel 12V 195W (Front Junction Box) - LSE195BF LIGHTSOLAR is the “Glass & Frameless” range of solar panels designed for applications where weight, thickness and resistance are fundamental characteristics. The cells of these monocrystalline panels, with an efficiency of 18.75%, are embedded in an exclusive multi-layer structure: the upper layer is a plastic polymer called ETFE highly resistant to corrosion and weathering, such that it can be defined as self-repairing. The surface of the panel, always exposed to scratches from tree branches, hail, sharp surfaces or other accidental shocks, is able to self-model, returning to the initial shape ideal for capturing sunlight. The lower layer of the structure is composed by an Alluminum sheet to contain and dissipate as much as possible the heat generated by the cells and to give the panel such strength that it is also perfect for nautical applications, where (with suitable and soft footwear) it is possible to step on the panel. Main Features: Structure - Built with 7 layers, including the ETFE surface, the best surface in terms of efficiency and durability, and an alluminum sheet that tightens it making it more robust and improving the dissipation of heat. Junction Box - The NDS aerodynamic box contains the supplied 3 meters connection cable and the bypass diodes required to reduce shading This special version of LightSolar has a completely flat surface, thanks to the use of a new connection method called Back Junction Box and laminated diodes included in the frame of the panel itself. The position of the connection cable, on the back, eliminates the Junction Box from the exposed surface of the panel. The round box, only 30mm in diameter, tightens the cable, making the connection solid and secure. This version is ideal for pop top roofs, minimizing space requirements, and eliminating cable clutter, as well as unsightly and complex cable boxes. Nominal Voltage 12V Nominal Power 195W Number of Cells in Series 36 Dimensions L1488 W673 x D4mm Weight 3.93Kg Warranty 2 Years

...Read more View Product

£477.00

NDS Energy Lightweight Semi Flexible Solar Panel 12V 200W (Rear Junction Box) - LSE200BR

LIGHTSOLAR is the “Glass & Frameless” range of solar panels designed for applications where weight, thickness and resistance are fundamental characteristics. The cells of these monocrystalline panels, with an efficiency of 18.75%, are embedded in an exclusive multi-layer structure: the upper layer is a plastic polymer called ETFE highly resistant to corrosion and weathering, such that it can be defined as self-repairing. The surface of the panel, always exposed to scratches from tree branches, hail, sharp surfaces or other accidental shocks, is able to self-model, returning to the initial shape ideal for capturing sunlight. The lower layer of the structure is composed by an Aluminum sheet to contain and dissipate as much as possible the heat generated by the cells and to give the panel such strength that it is also perfect for nautical applications, where (with suitable and soft footwear) it is possible to step on the panel. Main Features: Structure - Built with 7 layers, including the ETFE surface, the best surface in terms of efficiency and durability, and an alluminum sheet that tightens it making it more robust and improving the dissipation of heat. Junction Box - The NDS box contains the supplied 3 meters connection cable and the bypass diodes required to reduce shading This special version of LightSolar has a completely flat surface, thanks to the use of a new connection method called Back Junction Box and laminated diodes included in the frame of the panel itself. The position of the connection cable, on the back, eliminates the Junction Box from the exposed surface of the panel. The round box, only 30mm in diameter, tightens the cable, making the connection solid and secure. This version is ideal for pop-top roofs, minimizing space requirements, eliminating cable clutter, as well as unsightly and complex cable boxes. Number of cells 36 Nominal voltage 12V Max Power 200WP±3% Size (mm) 1488x673x4 Weight 6,79 Kg Open Circuit Voltage 23,3V Short Circuit Current 10,9A Max power Voltage 19,8V Max power Current 10,1A Length 3m cable 2×2,5mm²

£409.99

200W Semi-Flexible Fibreglass Solar Panel With A Round Rear Junction Box And 3M Cable, With Durable Etfe Coating

200W Semi-Flexible Fibreglass Solar Panel With A Round Rear Junction Box And 3M Cable, With Durable Etfe Coating - 3 Year Warranty At Van Junkies we love high-quality solar products. That's why we have developed this highly durable semi-flexible solar panel reinforced with fibreglass plastic and a strong ETFE surface and made from monocrystalline solar cells. This model also features a rear-fitted circular junction box and 3m dual core cable. This high-efficiency 200W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and backup solar power systems. The panel can also be used to provide a direct power supply for applications not sensitive to changes in input voltage/current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Specially textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions The highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) The rear junction box allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting The panel is incredibly light (only 3.50kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications The sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 200W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. This panel also features new-generation 9-busbar solar cells, which are more efficient than the 2, 3, 4 or 5 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Simple, professional installation: This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut into the roof/surface. Solar panel specifications: Peak power: 200W Maximum power voltage: 17.6V Maximum power current: 11.36A Open circuit voltage: 20.4V Short circuit current: 12.05A Dimensions: 1390 x 710 x 2 mm Weight: 3.50 kg This product comes with a 3 year workmanship warranty which covers material and production defects

...Read more View Product

£529.99

180W Pro Semi Flexible mono solar panel with self-adhesive backing and 5-Year Warranty

5-Year Warranty! 180W Pro Semi Flexible mono solar panel with self-adhesive backing (Austrian Cells) 1595 x 699 mm This high-efficiency, waterproof 180W monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications. The panel is ideal for curved roofs on boats, caravans, motorhomes, RVs etc. because it can easily fit to the shape of the roof when mounted. This panel can be instantly fitted using the peelable adhesive backing attached to the panel, or can also be secured using self-tapping screws, tenax fasteners or even zipping (not supplied). Product features: Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel that can be walked on Incredibly light (only 3.3kg) and very thin (just 2mm) which is great for motorhome and caravan roofs High resistance to salt water environments and the sealed waterproof design make this solar panel perfect for boats and marine applications 100% made in Austria to the highest European quality standards using Austrian and German components. IEC certified. The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening or winter). The fibreglass plastic used in this solar panel is very strong and durable. When the solar panel is mounted on to a rigid surface, it is possible to walk on the solar panel in soft shoes (to prevent accidental scratches), which makes it the perfect choice for mounting on a boat deck. The solar panel is fitted with 2 x 0.9m cable (4.0mm2 cross section) with waterproof MC4 compatible connectors which can be used for easy connectivity to your existing system Peak power: 180W Maximum power voltage: 20.6V Maximum power current: 9A Open circuit voltage: 24.8V Short circuit current: 9.4A Dimensions: 1595 x 699 x 2 mm Weight: 3.65 kg

...Read more View Product

£60.00

Victron Energy BlueSolar MPPT 100/15 – SCC010015200R

Victron Energy BlueSolar MPPT 100/15 – SCC010015200R A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on Victron for details Day/night timing and light dimming option See the software section on Victron for details Programming, real-time data and history display options – Color Control GX or other GX devices: see the Venus documents on our website. – A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed. Brand Victron Energy Manufacturer Part Number SCC010015200R GTIN 8719076025337 Voltage 12/24V Rated Charge Current 15A Nominal PV Power, 12V 220W Max. PV Short Circuit Current 15A Max. PV Open Circuit Voltage 100V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled No Dimensions H100 x W113 x D40mm Weight 0.5Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£488.99

Victron Energy SmartSolar MPPT 250V 85A Tr VE.Can – 250/85 SCC125085411

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC125085411 GTIN 8719076050896 Voltage 12/24/48V Rated Charge Current 85A Nominal PV Power, 12V 1200W Max. PV Short Circuit Current 70A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled Yes Dimensions H216 x W295 x D103mm Weight 4.5Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£452.99

Victron Energy SmartSolar MPPT 250V 70A Tr VE.Can – 250/70 SCC125070421

The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC125070421 GTIN 8719076051213 Voltage 12/24/48V Rated Charge Current 70A Nominal PV power, 12V 1000W Max. PV Short Circuit Current 35A Max. PV Open Circuit Voltage 250V absolute maximum coldest conditions 245V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 99% Bluetooth Enabled Yes Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years

...Read more View Product

£404.99

Victron Energy SmartSolar MPPT 150V 70A MC4 VE.Can – 150/70 SCC115070511

Victron Energy SmartSolar MPPT 150V 70A MC4 VE.Can – 150/70 SCC115070511 The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. VE.Direct or VE.Can For a wired data connection to a Color Control GX, other GX products, PC or other devices Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display Brand Victron Energy Manufacturer Part Number SCC115070511 GTIN 8719076051114 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A (max 30A per MC4 conn.) Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H215 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£339.99

Victron Energy SmartSolar MPPT 150V 70A Tr – 150/70 SCC115070211

Victron Energy SmartSolar MPPT 150V 70A Tr – 150/70 SCC115070211 A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Remote Monitoring and Control Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Advanced Maximum Power Point Detection in case of partial shading conditions If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Outstanding conversion efficiency No cooling fan. Maximum efficiency exceeds 98%. Flexible charge algorithm Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details). Extensive electronic protection Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage, temperature and current sensing via Bluetooth A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. Synchronized parallel charging with Bluetooth Up to 10 units can be synchronized with Bluetooth. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Remote on-off To connect for example to a VE.BUS BMS. Programmable relay Can be programmed to trip on an alarm, or other events. Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display. Brand Victron Energy Manufacturer Part Number SCC115070211 GTIN 8719076051404 Voltage 12/24/48V Rated Charge Current 70A Nominal PV Power, 12V 1000W Max. PV Short Circuit Current 50A Max. PV Open Circuit Voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H185 x W250 x D95mm Weight 3Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£69.99

Victron Energy SmartSolar MPPT 100V 15A – 100/15 SCC110015060R

Victron Energy SmartSolar MPPT 100V 15A – 100/15 SCC110015060R A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Features Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week. Programmable battery charge algorithm See the software section on our website for details Day/night timing and light dimming option See the software section on Victron for details Internal temperature sensor Compensates absorption and float charge voltage for temperature. Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function. Brand Victron Energy Manufacturer Part Number SCC110015060R GTIN 8719076040811 Voltage 12/24V Rated Charge Current 15A Nominal PV Power, 12V 220W Max. PV Short Circuit Current 15A Max. PV Open Circuit Voltage 100V Protection Category IP43 (electronic components), IP22 (connection area) Efficiency 98% Bluetooth Enabled Yes Dimensions H100 x W113 x D50mm Weight 0.6Kg Warranty 5 Years Country of Manufacture India

...Read more View Product

£224.99

100W Black Reinforced Semi-Flexible Solar Panel With Round Rear Junction Box And 3M Cable, With Durable Etfe Coating (German Solar Cells)

We love high quality solar products. That's why we have developed this highly durable black semi-flexible solar panel reinforced with anodised aluminium and a strong ETFE surface and made from German monocrystalline solar cells. This model also features a rear-fitted circular junction box and 3m dual core cable. This high efficiency 100W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 100W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Simple, professional installation:This particular model features the junction box and cable on the rear side of the panel to create a completely level surface and professional finish after installation. Unlike other solar panels, the junction box on this solar panel is a circular shape with only one dual core cable (3m length) attached, allowing for simplified installation. Please note: in order for this panel to be flush-mounted, a recess must be cut in to the roof/surface.This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)The panel is incredibly light (only 3.60kg) which is great for all vehiclesHigh resistance to salt water environment (junction box and cables underneath are protected from contact with water) and possibility to walk on the panel make it perfect for boats and yachtsSealed waterproof design ensures the panel can be used in all weather conditionsJunction box on the back allows for a smooth and level surface, free of trip hazards and unsightly cables. Round shape for easy fitting.Fitted with a single length of high quality 3m dual core cable for easy installation and wiring Solar panel specifications: Peak power: 100W Maximum power voltage: 20.2V Maximum power current: 4.95A Open circuit voltage: 23.9V Short circuit current: 5.25A Power allowance range: +/- 5% Solar Panel dimensions: 840x 665 x 4 mm Junction Box diameter: 30 mm Weight: 3.60 kg 1 x 3m high quality dual core solar cable attached (4mm cross section)

£448.99

160W (80W+80W) 12V Reinforced Narrow Semi-Flexible Solar Charging Kit

This high efficiency semi-flexible 160W (80W + 80W) solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:2 x 80W reinforced narrow semi-flexible solar panels with a durable ETFE coating (German solar cells)20A automatic solar charge controller with advanced connectivity optionsA pair of 5m 4mm single core solar extension cables with MC4 connectors5m of 4.0mm double core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminalsA pair of T-branch MC4 connectors, for connecting the panels in parallel 2 x 80W Reinforced narrow semi-flexible solar panels:These reinforced semi-flexible solar panels have a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within each solar panel. This additional reinforcement offers greater strength and resilience, making them amongst the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of these 80W semi-flexible solar panels is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of these panels creates an anti-reflective surface which allows the panels to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in these solar panels have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of these panels makes them ideal for curved roofs and surfaces where bonding is preferable (though the panels can also be fixed by bolts or screws). The panels are also incredibly light (only 3.05kg each) which makes them an ideal option for all vehicle applications. The unique narrow design also make them ideal for applications where space is restricted, or where there are obstructions on the roof. The panels are also highly resistant to salt water environments and it is also possible to walk on the panels, making them the perfect choice for boats and yachts.The panels are fitted with 2 x 1m of cable with MC4 connectors on the end.20A Solar charge controller:The kit includes a 20A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 320W (12V battery) / 640W (24V battery) of solar power input, which makes it ideal for future systm expansion.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit includes 5m positive and negative 4.0mm solar extension leads for connecting the solar panels to the solar charge controller, and a 5m 4.0mm dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panels and the battery 1m + 5m + 5m = 11m.A pair of T-branch MC4 connectors is also provided, in order to connect these panels in parallel (Click on the Installation tab for further details).Specifications (per solar panel):Peak power: 80WMaximum power voltage: 20.2VMaximum power current: 3.96AOpen circuit voltage: 23.9VShort circuit current: 4.20APower allowance range: +/- 5%Solar Panel Dimensions: 1365 x 350 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 3.05 kg2 x 1m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Rated current 20AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 10mm2Size: 15.9 x 8.1 x 4.8 cmWeight: 300 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package.The panels are covered by a 1 year repair or replacement warranty provided by Photonic Universe. We will repair or replace defective items at our discretion. The solar controller is covered by a 1 year manufacturer warranty. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells. Wiring guide for Solar Panel Kits in Series Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

160W 12V Reinforced Semi-Flexible Dual Battery Solar Charging Kit

This high-efficiency semi-flexible 160W dual battery solar charging kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:160W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)20A 12V dual battery solar charge controller for independent charging of 2 batteries or battery banks (can work with a single battery too)A pair of 5m 4.0mm² single core extension cables with MC4 connectors5m of 4.0mm² dual core battery cable 160W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 160W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 5.75kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 1m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.20A Dual battery controller:The kit includes a 20A 12V/24V dual battery solar charge controller designed to charge and protect two batteries independently, with automatic cut off to prevent over-charging. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your batteries. PWM technology can also recover some lost battery capacityThis is a perfect solar controller for a caravan / camper van / boat or another system with two batteries (e.g. engine and leisure battery) or battery banks. You can set the initial charging priority e.g. 80% power to go to the engine battery and 20% to leisure battery. When one of the batteries is fully charged the controller will automatically divert all power to the other battery.Can the unit work with only one battery? Yes, absolutely! The controller will determine automatically if there's only one battery connected and will pass 100% of charging current to this battery. You can add a second battery later.The unit has numerous safety functions, including protection against reverse current at night (from the battery back to the solar panel), over charge, short circuit, reverse polarity etc. Other features include various LED indicators, battery type selection (sealed, gel, flooded) and an RJ-45 socket for an optional remote LCD meter with 10m cable.A built-in temperature sensor allows the controller to optimise the charging process depending on the ambient temperature. If you are planning to position the controller far away from the battery, or if the battery and the controller are exposed to different ambient temperatures, an external remote temperature sensor with 3m cable is recommended for this dual battery solar charge controller. To enable connection to the screw terminals of the controller, the green connector block on the end of the remote temperature sensor cable should be cut off.The solar charge controller is compatible with sealed, gel and flooded lead acid batteries.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (4.0mm² cross section) and 5m of 4.0mm² dual core battery cable for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 160WMaximum power voltage: 20.2VMaximum power current: 7.92AOpen circuit voltage: 23.9VShort circuit current: 8.40APower allowance range: +/- 5%Solar Panel Dimensions: 1365 x 665 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 5.75 kg2 x 1m of high quality single core solar cable (4mm² cross section)Male and female MC4 connectors Charge controller specifications:Rated charging current 20AFully automated operation and auto 12/24V selection3 pairs of terminals (input, battery 1, battery 2)LEDs to indicate state of chargeTemperature sensor for temperature compensation of charging (-30mV/C/12V)RJ-45 connection point for a remote meter (not included)Various protection features (over charge, short circuit, reverse polarity etc)Self-consumption: 4mA at night, 10mA when chargingWorking temperature: -35C to +55CTerminals for wire up to 4.0mm2Size: 15.5 x 7.6 x 4.0 cmWeight: 230 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year workmanship warranty. We will repair or replace defective items at our discretion. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase.

£288.99

100W (50W+50W) 12V Reinforced Narrow Semi-Flexible Dual Battery Solar Charging Kit

This high efficiency semi-flexible 100W (50W + 50W) dual battery solar charging kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:2 x 50W reinforced narrow semi-flexible solar panels with a durable ETFE coating (German solar cells)10A 12V dual battery solar charge controller for independent charging of 2 batteries or battery banks (can work with a single battery too)A pair of 5m 4.0mm thick single core extension cables with MC4 connectors2 x 5m 4.0mm dual core battery cables with a fuse holder, 10A fuse and 8mm ring terminalsA pair of T-branch MC4 connectors, for connecting the panels in parallel 2 x 50W Reinforced narrow semi-flexible solar panels:These reinforced semi-flexible solar panels have a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within each solar panel. This additional reinforcement offers greater strength and resilience, making them amongst the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of these 50W semi-flexible solar panels is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of these panels creates an anti-reflective surface which allows the panels to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in these solar panels have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These panels also feature innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of these panels makes them ideal for curved roofs and surfaces where bonding is preferable (though the panels can also be fixed by bolts or screws). The panels are also incredibly light (only 2kg each) which makes them an ideal option for all vehicle applications. The unique narrow design also make them ideal for applications where space is restricted, or where there are obstructions on the roof. The panels are also highly resistant to salt water environments and it is also possible to walk on the panels, making them the perfect choice for boats and yachts.The panels are fitted with 2 x 90cm of cable with MC4 connectors on the end.10A Dual battery controller:The kit includes a 10A 12V/24V dual battery solar charge controller designed to charge and protect two batteries independently, with automatic cut off to prevent over-charging. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your batteries. PWM technology can also recover some lost battery capacityThis is a perfect solar controller for a caravan / camper van / boat or another system with two batteries (e.g. engine and leisure battery) or battery banks. You can set the initial charging priority e.g. 80% power to go to the engine battery and 20% to leisure battery. When one of the batteries is fully charged the controller will automatically divert all power to the other battery.Can the unit work with only one battery? Yes, absolutely! The controller will determine automatically if there's only one battery connected and will pass 100% of charging current to this battery. You can add a second battery later.The unit has numerous safety functions, including protection against reverse current at night (from the battery back to the solar panel), over charge, short circuit, reverse polarity etc. Other features include various LED indicators, battery type selection (sealed, gel, flooded) and an RJ-45 socket for an optional remote LCD meter with 10m cable.A built-in temperature sensor allows the controller to optimise the charging process depending on the ambient temperature. If you are planning to position the controller far away from the battery, or if the battery and the controller are exposed to different ambient temperatures, an external remote temperature sensor with 3m cable is recommended for this dual battery solar charge controller. To enable connection to the screw terminals of the controller, the green connector block on the end of the remote temperature sensor cable should be cut off.The solar charge controller is compatible with sealed, gel and flooded lead acid batteries.Additional items:The kit includes 5m positive and negative 4.0mm solar extension leads for connecting the solar panels to the solar charge controller, and a 5m 4.0mm dual core battery cable fitted with a 15A fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panels and the battery 1m + 5m + 5m = 11m.A pair of T-branch MC4 connectors is also provided, in order to connect these panels in parallel (Click on the Installation tab for further details).Specifications (per solar panel):Peak power: 50WMaximum power voltage: 20.2VMaximum power current: 2.48AOpen circuit voltage: 23.9VShort circuit current: 2.62APower allowance range: +/- 5%Solar Panel Dimensions: 880 x 350 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 2.00 kg2 x 90cm of high quality single core solar cable (2.5mm² cross section)Male and female MC4 connectors Charge controller specifications:Rated charging current 10AFully automated operation and auto 12/24V selection3 pairs of terminals (input, battery 1, battery 2)LEDs to indicate state of chargeTemperature sensor for temperature compensation of charging (-30mV/C/12V)RJ-45 connection point for a remote meter (not included)Various protection features (over charge, short circuit, reverse polarity etc)Self-consumption: 4mA at night, 10mA when chargingWorking temperature: -35C to +55CTerminals for wire up to 4.0mm2Size: 15.5 x 7.6 x 4.0 cmWeight: 185 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panels and therefore delivered in a separate package. Wiring guide for Solar Panel Kits in SeriesThe panels are covered by a 1 year repair or replacement warranty provided by Photonic Universe. We will repair or replace defective items at our discretion. The solar controller is covered by a 1 year manufacturer warranty. For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells. Advantages of Solar Solar panels are a great addition to caravans, campervans and motorhomes for a number of reasons. Not only do they provide a clean and renewable source of energy, but they also offer a number of practical advantages that make them a worthwhile investment for anyone who spends a lot of time on the road. One of the biggest advantages of solar panels in caravans and campervans is that they allow you to be more self-sufficient while you're traveling. With a solar panel system, you can generate your own electricity, which means you don't have to rely on hooking up to external power sources. This is especially useful when you're camping in remote areas where there may not be any electrical outlets nearby. Another advantage of solar panels in caravans, campervans and motorhomes is that they can help you save money on your energy bills. By generating your own electricity, you can reduce your reliance on more expensive sources of power, such as gasoline generators or hooking up to the grid. This can help you save money on fuel and other energy costs, making solar panels a cost-effective investment in the long run. Solar panels are also easy to install and maintain, which makes them a convenient choice for caravans and campervans. They are relatively lightweight, so they won't add a lot of extra weight to your vehicle, and they can be easily mounted on the roof or other parts of your caravan or campervan. In addition to the practical advantages, solar panels are also environmentally friendly. They produce clean, renewable energy, which means they don't produce any harmful emissions or contribute to climate change. This makes them a great choice for anyone who is looking to reduce their carbon footprint while they're on the road. Overall, solar panels are a great addition to caravans, campervans and motorhomes for anyone who spends a lot of time on the road. They offer a convenient and cost-effective way to generate your own electricity, and they are easy to install and maintain. Plus, they are environmentally friendly, making them a win-win for both practicality and sustainability.

...Read more View Product

£189.99

60W 12V Reinforced Semi-Flexible Solar Charging Kit

This high-efficiency semi-flexible 60W solar panel kit is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid and back up solar power systems.Solar kit includes:60W reinforced semi-flexible solar panel with a durable ETFE coating (German solar cells)10A automatic solar charge controller with advanced connectivity optionsA pair of 5m 2.5mm² single core solar extension cables with MC4 connectors5m of 2.5mm² dual core battery cable with 10A fuse, fuse holder and 8mm ring terminals 60W Reinforced semi-flexible solar panel:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 60W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area.The semi-flexible design of this panel makes it ideal for curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws). The panel is also incredibly light (only 2.35kg) which makes it an ideal option for all vehicle applications. This panel is also highly resistant to salt water environments and it is also possible to walk on the panel, making it the perfect choice for boats and yachts.The panel is fitted with 2 x 0.9m of cable with MC4 connectors on the end which simply plug into the 5m extension solar cable supplied with the kit, to join the solar panel and the charge controller.10A Solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:The kit also includes a pair of 5m positive and negative solar extension leads (2.5mm² cross section) and 5m of 2.5mm² dual core battery cable fitted with a fuse, fuse holder and 8mm ring terminals for use between the solar charge controller and your battery, making the total cable length between the solar panel and the battery 1m + 5m + 5m = 11m.Solar panel specifications:Peak power: 60WMaximum power voltage: 20.2VMaximum power current: 2.97AOpen circuit voltage: 23.9VShort circuit current: 3.15APower allowance range: +/- 5%Solar Panel Dimensions: 720 x 505 x 4 mmJunction Box Dimensions: 90 x 16 x 16 mmWeight: 2.35 kg2 x 0.9m of high quality single core solar cable (2.5mm² cross section)Male and female MC4 connectors Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35°C to +50°CTerminals for wire up to 4mm²Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year workmanship warranty

...Read more View Product

£168.99

50W 12V Solar Charging Kit (German Solar Cells) With 10A Controller, Mounting Brackets And Cables

This high efficiency 50W 12V charging kit is perfect for permanent outdoor use to provide free electricity for charging a 12V battery to power various devices for many applications such as in a camper van, boat, shed or farm.This is a complete 50W solar charging kit which includes:High efficiency 50W monocrystalline solar panel with 5m of special solar cable and waterproof connectors10A automatic solar charge controller with advanced connectivity optionsSet of 4 corner plastic brackets for bonding to the roofWaterproof double entry cable gland5m of 2.5mm² dual core battery cable fitted with a 10A fuse, fuse holder and 8mm ring terminalsPair of waterproof MC4 connectors for easy connectivityUser manual with detailed installation instructions 50W solar panel:At Photonic Universe we always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions. This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V solar panel charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14 x 7cm.This controller can work with sealed, gel, and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load; such as in a campervan or boat.This model also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Additional items:This kit includes a set of 4 plastic corner mounting brackets for fixing the solar panel to the roof. The brackets can be bonded to the roof using an appropriate sealant (not included). The waterproof double cable entry gland included with the kit is perfect for getting cables from outside to inside and keeping the place fully waterproof. The kit also includes 5m dual core battery cable with a 10A fuse, fuse holder and 8mm ring terminals and a pair of MC4 connectors.Solar panel specifications:Peak power: 50WMaximum power voltage: 20.2VMaximum power current: 2.48AOpen circuit voltage: 23.9VShort circuit current: 2.63APower allowance range: +/- 3%Dimensions: 590 x 505 x 25mmWeight: 4.2 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross section and 10A fuseMale and female MC4 connectors attached Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wires up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Corner brackets specifications: Material: plastic Colour: white Size (1 bracket): 15x15x6.5cm Weight: (4 brackets): 1.6kg Please note: due to our warehouse arrangements, the solar charge controller and accessories may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty (including a 1 year warranty for the solar charge controller, and 1 year workmanship warranty for the solar panel). For more information please refer to our Terms and Conditions.In addition, solar cells are guaranteed to produce at least 90% of nominal power in 10 years after purchase and at least 80% of nominal power in 25 years after purchase. This warranty is provided by the manufacturer of solar cells

...Read more View Product

50W 12V Solar Charging Kit With 10A Controller And 5M extension cable (German Solar Cells)

We always ensure that our products are of the highest quality. This is why we have selected premium German solar cells for use in this solar panel. These high-efficiency solar cells perform exceptionally well in low light conditions (particularly when compared to solar cells of other origin) and they produce a good amount of power simply in daylight, even when direct sunlight is not available.50W solar panel:This high efficiency, waterproof 50W 12V monocrystalline solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications such as in a camper van, motorhome, boat, shed, farm, as well as remote applications such as telecommunications or monitoring equipment. It can also be used to provide a direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps).The panel is fitted with 5m of special solar cable which can work at high roof temperatures, with minimum power losses. A pair of male / female MC4 connectors are crimped on the end of cable for easy connection to other solar panels, extension leads or to your existing system (the MC4 connectors can also be cut off when wiring to the screw terminals of a solar charge controller).The long-lasting, high-efficiency monocrystalline German solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. The waterproof design ensures the panel can be used in all weather conditions.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.10A solar charge controller:The kit includes a 10A 12V/24V Photonic Universe solar charge controller designed to protect batteries whilst charging them, with automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, and a load "on/off" button. One of the greatest benefits of this powerful 10A controller is the small size - only 14x7cm.This controller can work with sealed, gel and flooded batteries (the default is sealed) or a user-defined battery type (please note battery type can only be changed from default using one of the communication methods listed below). The controller can accept up to 160W (12V battery) / 320W (24V battery) of solar power input, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a campervan or boat.The solar charge controller also features advanced communication technology, which offers the user the opportunity to monitor and program parameters for the solar charge controller through various methods:1) The controller can be connected to a remote meter MT50 with an LCD screen, which displays system performance information, and allows the user to manually adjust parameters and load settings2) The controller can be connected to a Wi-Fi module to create a Wi-Fi network, to which your mobile phone or tablet can connect, in order to monitor or adjust charging parameters and controller settings through a free mobile app - Solar Station Monitor (available for Android and iOS users).3) An RJ45 to USB cable can be used to connect the controller directly to your PC / laptop, where parameters and settings can be monitored and adjusted via a free computer program - Solar Station Monitor (Windows-based PCs and laptops only).Using one of these communication methods, the user will gain access to various charging parameters such as voltage, current (separately for solar panel / load), battery state of charge, accumulated charge and discharge energy, min/max voltage and other information. If required the user will also be able to amend the battery type and capacity, set charging volts for different charging stages, specify the duration of each charging stage, create a user-defined battery type with charging parameters specific to their battery (if the pre-existing options are unsuitable), personalise the 'load' settings (e.g. set timers for lighting, fans, pumps) and more.In addition to the built-in temperature sensor, the controller has a pair of terminals for connecting a remote temperature sensor, which can be attached directly to the battery to measure the battery temperature more precisely and optimise the charging process.Please note: This is an essentials kit and does not include mounting accessories or battery cable. If you require these additional items, please purchase them separately.Solar panel specifications:Peak power: 50WMaximum power voltage: 20.2VMaximum power current: 2.48AOpen circuit voltage: 23.9VShort circuit current: 2.63APower allowance range: +/- 3%Dimensions: 590*505*25mmWeight: 4.2 kg4 mounting holes 9 x 11 mm2 x 5m of high quality single core solar cable 2.5mm cross sectionMale and female MC4 connectors attached Charge controller specifications:Rated current 10AFully automated operation and auto 12/24V selectionWide solar input voltage range up to 50V3 pairs of terminals (input, battery, output)LEDs to indicate charging, battery and loadTemperature sensor for automatic compensation (-3mV/°C/2V)Over load protection (≥1.05 times the rated discharge current)Short circuit protection (≥2 times the rated discharge current)Over charge / discharge, overheating and other protection featuresSelf-consumption: ≤ 8.4mA (12V) / ≤ 7.8mA (24V)Working temperature: -35C to +50CTerminals for wire up to 4mm2Size: 13.8 x 6.9 x 3.7 cmWeight: 130 gMultiple mounting holes for ease of installation Please note: due to our warehouse arrangements, the solar charge controller may be shipped from a different warehouse to the solar panel and therefore delivered in a separate package.This product is covered by a 1 year warranty

...Read more View Product

£198.99

100W Reinforced Narrow Semi-Flexible Solar Panel With A Durable Etfe Coating (German Solar Cells)

We love high quality solar products. That's why we have developed this highly durable semi-flexible solar panel reinforced with anodised aluminium and a strong ETFE surface and made from German monocrystalline solar cells. This high efficiency 100W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications.Aluminium reinforcement and strong ETFE coating:This reinforced semi-flexible solar panel has a unique 7-layer construction, featuring an embedded sheet of anodised aluminium fully encapsulated within the solar panel. This additional reinforcement offers greater strength and resilience, making this one of the most robust semi-flexible solar panels available on the market.In addition to the aluminium reinforcement, the surface of this 100W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking , delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here.High quality German 5-busbar solar cells:The high-efficiency monocrystalline German solar cells used in this solar panel have excellent performance in low light conditions (particularly when compared to solar cells of unknown origin) and they produce a good amount of power even in daylight - when direct sunlight is not available. These long-lasting German solar cells will provide many years of consistent, free power.This panel also features innovative 5 busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. These solar cells are also the best choice for applications in warmer climates, as they operate well even in high ambient temperatures.Other benefits:Semi-flexible design makes it ideal for slightly curved roofs and surfaces where bonding is preferable (though the panel can also be fixed by bolts or screws)Unique narrow shape is ideal for applications where space is restricted, or where there are obstructions on the roof (only 50.5cm wide)The panel is incredibly light (only 4kg) which is great for all vehiclesHigh resistance to salt water environments and possibility to walk on the panel make it perfect for boats and yachts.Sealed waterproof design ensures the panel can be used in all weather conditions.The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system, for linking several panels together or for connecting 4mm extension cable. Solar panel specifications: Peak power: 100W Maximum power voltage: 20.2V Maximum power current: 4.95A Open circuit voltage: 23.9V Short circuit current: 5.25A Power allowance range: +/- 5% Solar Panel Dimensions: 1125 x 505 x 4 mm Junction Box Dimensions: 90 x 16 x 16 mm Weight: 3.65 kg 2 x 1m of high quality single core solar cable (4mm² cross section) Male and female MC4 connectors

£52.54

Victron Polycrystalline panel 45W-12V Poly 425x668x25mm series 4a SPP040451200

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

...Read more View Product

£199.00

Victron Polycrystalline panel 270W-20V Poly 1640x992x35mm series 4 a SPP042702000

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

Victron Monocrystalline panel 360W-24V Mono 1956x992x40mm series 4a SPM043602400

Low voltage-temperature coefficient enhances high-temperature operation. | Exceptional low-light performance and high sensitivity to light across the entire solar spectrum. | 25-Year limited warranty on power output and performance. | 5-Year limited warranty on materials and workmanship. | Sealed, waterproof, multi-functional junction box gives high level of safety. | High performance bypass diodes minimize the power drop caused by shade. | Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation. | A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems. | Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.

£249.99

120W black semi-flexible fibreglass solar panel with durable ETFE coating

This high efficiency 120W solar panel is perfect for permanent outdoor use to provide free electricity for charging 12V batteries to power various applications, such as in a motorhome, caravan, camper, boat, or for solar lighting systems, off-grid, and back up solar power systems. The panel can also be used to provide direct power supply for applications not sensitive to changes in input voltage / current (e.g. electric motors or pumps) and for various grid-tie applications. Product features: Robust construction using plastic reinforced with glass fibre creates a sturdy and durable solar panel Special textured surface significantly reduces light reflection and improves performance in low light and cloudy conditions Highly flexible design makes this panel ideal for curved roofs and surfaces where bonding is preferable (though it can also be fixed by bolts or screws) Black backing makes the solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces The panel is incredibly light (only 2.19kg) and very thin (just 2mm) which is great for all vehicles High resistance to salt water environments makes it perfect for boats and marine applications Sealed waterproof design ensures it can be used in all weather conditions Strong ETFE coating: In addition to the fibreglass reinforcement, the surface of this 120W semi-flexible solar panel is made of strong ETFE material which has a longer service life compared to standard semi-flexible solar panels. As a result, these particular semi-flexible solar panels are extremely hard-wearing and less prone to cracking, delamination and corrosion. The lightly textured coating of this panel creates an anti-reflective surface which allows the panel to absorb a far greater amount of light, thereby increasing efficiency. ETFE material has long been used in applications where durability and high-temperature resistance is required, such as in the Eden Project, Cornwall. You can read more about ETFE and its benefits here. High quality 5-busbar solar cells: This panel also features new generation 5-busbar solar cells, which are more efficient than the 2, 3 or 4 busbar solar cells used in most other solar panels, and are able to extract more power from the same surface area. This results in a smaller overall solar panel, which is ideal for applications where space is limited. All-black design: This solar panel has a unique black backing, making this solar panel ideal for discreet and aesthetically pleasing installation on dark coloured roofs, vehicles or mounting surfaces. Please note that this solar panel is not 'ultra jet-black' - the exact hue may vary marginally from panel to panel, depending on the batch of solar cells. Anti-reflective textured surface: The textured surface of this solar panel reduces the reflection of light whilst maximising the absorption of light from every possible angle. This ensures high performance in low light or cloudy conditions, or when the light falls at an angle (in the morning, evening, or winter). Ease of connectivity: The panel is fitted with 2 x 1m of cable specially designed for solar panels to carry high currents with negligible power loss (4mm² cross section). The cable comes with waterproof MC4 connectors which can be used for easy connectivity to your existing system Solar panel specifications: Peak power: 120W Maximum power voltage: 20.9V Maximum power current: 5.75A Open circuit voltage: 24.5V Short circuit current: 6.03A Dimensions: 1025 x 665 x 3 mm Weight: 2.19 kg This product comes with a 3 year workmanship warranty

...Read more View Product

£729.65

KIT1002 - 100w Rigid Solar - Victron MPPT - 105ah Fogstar Lithium

12V Off-Grid Solar Charging Kit with 105ah Fogstar Lithium & 100w of Rigid Solar & Victron MPPT Charge Controller.This starter power system is designed for campervans, motorhomes, or off-grid setups. Featuring a 100W rigid glass solar panel, a powerful 105Ah Fogstar Drift lithium battery, and a Victron SmartSolar MPPT charge controller, it delivers efficient, reliable energy. The kit includes essential components like heavy-duty busbars, cabling, fusing, switches, and roof gland — everything you need for a safe, tidy, and future-ready installation. 100W Rigid Monocrystalline Solar Panel - Dimensions: 1200 x 540 x 30 mmLithium Leisure Battery - Fogstar Drift 12v 105Ah150amp Busbars (5 x 8mm stud) Positive & Negative with CoversVictron Energy - Battery switch ON/OFF 275A - VBS127010010Battery Cable 25mm 170amp High Quality Extra Flex Cable RedBattery Cable 25mm 170amp High Quality Extra Flex Cable BlackBattery Crimp Cable Lugs 10mm Hole for 25mm Cable (Sold in 1's)Battery Crimp Cable Lugs 8mm Hole for 25mm Cable (Sold in 1's)Blue Sea 5183 Fuse Terminal 100ABlue Sea 5191 BS5191 Fuse Block TERMINAL 30-300AVictron Energy SmartSolar MPPT 75V 10A – 75/10 SCC075010060RSolar panel mounts (Z Brackets)Pair Of 5M Single Core Extension Cable Leads 6.0Mm For Solar Panels And Solar Charging KitsSolar Panel Double Cable Roof Entry Gland (Black or White) for Motorhome or Campervan BlackSwitchable Surface Mount Waterproof Circuit Breaker 50 Amps – HCB50S2M 6.0MM2 Dual Core Extension Cable with Fuse Holder, 30A Fuse and Ring Terminals (8MM) Key Highlights Complete Off-Grid Solution: Designed for campervans, motorhomes, and off-grid setups, this kit includes everything needed for a reliable, tidy, and future-ready installation Efficient Solar Power: The 100W rigid monocyrstaline solar panel with a durable ETFE coating ensures high energy yield, lightweight installation, and long-term durability, even in challenging environments Powerful Lithium Battery: The Fogstar Drift 12V 105Ah lithium leisure battery delivers robust energy storage, featuring Grade A EVE cells, a built-in heater for cold-weather charging, Bluetooth monitoring, and a 10-year warranty Advanced Charge Control: The Victron SmartSolar MPPT 75/10 charge controller maximizes solar energy harvest with ultra-fast Maximum Power Point Tracking (MPPT), built-in Bluetooth for monitoring, programmable charging profiles, and intelligent battery management Safety & Reliability: Includes heavy-duty busbars, high-quality cabling, fusing, switches, and a waterproof circuit breaker to ensure safe and efficient power distribution Easy Installation: All components, including roof entry gland, extension cables, and sealant, are provided for a straightforward and professional installation Core Capabilities Optimized Energy Harvest: The Victron MPPT controller increases solar charging efficiency by up to 30% compared to traditional controllers, adapting to changing sunlight conditions Smart Battery Management: The Fogstar Drift battery’s integrated BMS and Bluetooth connectivity allow real-time monitoring and protection against overcharge, over-discharge, and temperature extremes Flexible System Expansion: The kit’s robust busbars, fusing, and cabling support future upgrades or additional solar panels and batteries User-Friendly Monitoring: Both the battery and charge controller offer wireless monitoring via dedicated apps, enabling users to track system status and performance from their smartphone Comprehensive Protection: The system features over-current, over-temperature, and short-circuit protection for maximum safety

...Read more View Product

£839.99

KIT1001 - 100w Flexible Solar - Victron MPPT - 105ah Fogstar Lithium

12V Off-Grid Solar Charging Kit with 105ah Fogstar Lithium & 100w of Flexible Solar & Victron MPPT Charge Controller.This starter power system is designed for campervans, motorhomes, or off-grid setups. Featuring a 100W semi-flexible solar panel, a powerful 105Ah Fogstar Drift lithium battery, and a Victron SmartSolar MPPT charge controller, it delivers efficient, reliable energy. The kit includes essential components like heavy-duty busbars, cabling, fusing, switches, and roof gland — everything you need for a safe, tidy, and future-ready installation. 100W Black Reinforced Narrow Semi-Flexible Solar Panel With A Durable Etfe CoatingLithium Leisure Battery - Fogstar Drift 12v 105Ah150amp Busbars (5 x 8mm stud) Positive & Negative with CoversVictron Energy - Battery switch ON/OFF 275A - VBS127010010Battery Cable 25mm 170amp High Quality Extra Flex Cable RedBattery Cable 25mm 170amp High Quality Extra Flex Cable BlackBattery Crimp Cable Lugs 10mm Hole for 25mm Cable (Sold in 1's)Battery Crimp Cable Lugs 8mm Hole for 25mm Cable (Sold in 1's)Blue Sea 5183 Fuse Terminal 100ABlue Sea 5191 BS5191 Fuse Block TERMINAL 30-300AVictron Energy SmartSolar MPPT 75V 10A – 75/10 SCC075010060RSikaflex 522 Caravan Sealant & AdhesivePair Of 5M Single Core Extension Cable Leads 6.0Mm For Solar Panels And Solar Charging KitsSolar Panel Double Cable Roof Entry Gland (Black or White) for Motorhome or Campervan BlackSwitchable Surface Mount Waterproof Circuit Breaker 50 Amps – HCB50S2M 6.0MM2 Dual Core Extension Cable with Fuse Holder, 30A Fuse and Ring Terminals (8MM) Key Highlights Complete Off-Grid Solution: Designed for campervans, motorhomes, and off-grid setups, this kit includes everything needed for a reliable, tidy, and future-ready installation Efficient Solar Power: The 100W semi-flexible solar panel with a durable ETFE coating ensures high energy yield, lightweight installation, and long-term durability, even in challenging environments Powerful Lithium Battery: The Fogstar Drift 12V 105Ah lithium leisure battery delivers robust energy storage, featuring Grade A EVE cells, a built-in heater for cold-weather charging, Bluetooth monitoring, and a 10-year warranty Advanced Charge Control: The Victron SmartSolar MPPT 75/10 charge controller maximizes solar energy harvest with ultra-fast Maximum Power Point Tracking (MPPT), built-in Bluetooth for monitoring, programmable charging profiles, and intelligent battery management Safety & Reliability: Includes heavy-duty busbars, high-quality cabling, fusing, switches, and a waterproof circuit breaker to ensure safe and efficient power distribution Easy Installation: All components, including roof entry gland, extension cables, and sealant, are provided for a straightforward and professional installation Core Capabilities Optimized Energy Harvest: The Victron MPPT controller increases solar charging efficiency by up to 30% compared to traditional controllers, adapting to changing sunlight conditions Smart Battery Management: The Fogstar Drift battery’s integrated BMS and Bluetooth connectivity allow real-time monitoring and protection against overcharge, over-discharge, and temperature extremes Flexible System Expansion: The kit’s robust busbars, fusing, and cabling support future upgrades or additional solar panels and batteries User-Friendly Monitoring: Both the battery and charge controller offer wireless monitoring via dedicated apps, enabling users to track system status and performance from their smartphone Comprehensive Protection: The system features over-current, over-temperature, and short-circuit protection for maximum safety

...Read more View Product

£425.00

200w Slimedge by Solar Technology - Hybrid Lightweight Rigid Panel - 10 year warranty

For 25 years, Solar Technology have been pushing the boundaries of panel manufacturing. Now, as they celebrate their silver anniversary, they are proud to unveil the next evolution: SlimEdge. This isn't just a solar panel; it's a game-changer. Shingled Monocrystalline Cells - Convert more sunlight into electricity, with a design that maximises surface area - perfect for tight spaces like caravans and campers. Discreet Inbuilt Fixing Brackets - Quick, easy installation with a sleek, low-profile design. It also helps reduce vehicle height for a cleaner, more aerodynamic look. Up to 50% Lighter Than Traditional Rigid Panels - Improved Fuel Economy - Lighter weight helps reduce fuel costs. Sturdy Anodised Aluminium Frame - Sleek, Modern Appearance: Adds a stylish edge to your setup. Durability & Corrosion Resistance: Built to withstand even the toughest outdoor conditions. Easy Installation: A rigid frame ensures the panel is easy to mount with no flexing. 10-Year Panel Warranty - Enjoy peace of mind knowing your panel is protected against premature failure, and offers long-lasting reliability. Power - 200w Dimensions - 1513mm x 807mm Weight - 5.5kg OCV - 28.5v

...Read more View Product