Victron Battery Chargers
Power your adventures with Victron Battery Chargers—engineered for efficiency, reliability, and seamless integration with your energy system. From lithium battery chargers to multi-stage charging solutions, Victron provides power when you need it most.
3 Products Found
Best Seller
£159.99
Victron 18A 12V Smart Dc To Dc Automatic Multi-Stage Intelligent Battery-To-Battery Charger ORI121222120
Victron 18A 12V Smart Dc To Dc Automatic Multi-Stage Intelligent Battery-To-Battery Charger ORI121222120
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Features
Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
Battery charge algorithm (configurable) or fixed output.
Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
For lithium batteries absorption time is fixed, default 2 hours.
Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection
When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
PRODUCT CODE: ORI121222120
DC to DC (Battery to Battery) Wiring Diagram, Information and Help
Datasheet
Victron Orion Isolated Datasheet
Installation and Help
Engine-on detection set-up Orion-Tr Smart DC-DC - Click Here
Video
...Read more
View Product
Best Seller
£1,171.00
Victron Energy MultiPlus 12v Inverter Charger 12/3000/120-16 VE.Bus – PMP122300001
Victron Energy MultiPlus 12v Inverter Charger 12/3000/120-16 VE.Bus – PMP122300001
The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
Features
Two AC Outputs
The main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).
Virtually unlimited power thanks to parallel operation
Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. Three phase capability In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.
PowerControl – Dealing with limited generator, shore side or grid power
The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.
PowerAssist – Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
Solar energy: AC power available even during a grid failure
The MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.
System configuring
In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.
Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.
Brand
Victron Energy
Manufacturer Part Number
PMP122300001
Voltage
12
Transfer Switch (A)
50
Cont. Output Power at 25°C (VA)
3000
Peak Power (W)
6000
Max Efficiency
93%
Zero Load Power (W)
20
Charge Current House Battery (A)
120
Charge Current Starter Battery (A)
4
Battery Temperature Sensor
Yes
Programmable Relay
Yes (3x)
Remote on-off
Yes
Protection Category
IP21
Dimensions
H362 x W258 x D218mm
Weight (kg)
19
Warranty
5 Years
Country of Manufacture
India
...Read more
View Product
Best Seller
£501.48
Victron Energy SmartSolar MPPT 150/45-MC4 – SCC115045212
Victron Energy SmartSolar MPPT 150/45-MC4 – SCC115045310
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
Models:12/24/36/48 Volt
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve.
Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.PV short circuit and PV reverse polarity protection.PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Weight
3 kg
Dimensions
250 × 95 × 215 mm
Brand
Victron Energy
Charge Controller Type
MPPT
Max PV Voltage
150V
Output Voltage
12V, 24V, 36V, 48V
Amps Range
40 – 49
Bluetooth
Yes
Input Connection Type
MC4 Connectors
IP Rating
IP43
Warranty - 5 Years
...Read more
View Product
0 Kits Selected✕
Victron Battery Chargers – Reliable Power for Any Application
Stay powered up with Victron Battery Chargers, designed for efficiency and durability in off-grid and mobile setups. Whether you're on the road, at sea, or living off-grid, Victron chargers provide smart charging technology that optimises battery performance while ensuring long-term reliability.
Why Choose a Victron Lithium Battery Charger?
A Victron lithium battery charger ensures fast, safe, and optimised charging for long-lasting battery performance. With advanced features like adaptive charging and temperature compensation, these chargers protect your lithium batteries, extending their lifespan while delivering maximum efficiency. Ideal for campervans, motorhomes, and boats, they keep your power system running smoothly.
Victron Charger Solutions for Boats, Vans & Off-Grid Living
From campervans to narrowboats, a Victron charger delivers consistent and efficient energy wherever you need it. Whether you require a compact charger for weekend trips or a high-capacity system for full-time off-grid living, Victron offers a range of models to suit different applications. Designed for reliability in demanding conditions, these chargers integrate seamlessly with Victron inverters and solar setups for a complete power solution.
Recommended Full Kits
Loading...
£3,096.12
£2,658.96
£2,576.49
£2,998.30
£2,610.30
Loading...
£2,576.49
£2,409.49
£2,438.68
£2,223.66
£2,998.30
£2,610.30
£1,392.64
£2,129.28
£2,316.26
£2,223.66
Loading...
£3,997.58
£4,130.58
£3,780.58
£3,096.12
£2,658.96
£2,576.49
£2,518.60
£2,960.59
£2,731.12
Loading...
£1,287.58
£1,019.18
£1,543.99
£2,373.90
£1,681.63
£1,287.58
£1,019.18
£1,543.99
FAQs
Learn more about our business & products below
Victron chargers are designed with advanced charging algorithms, adaptive charging, and temperature compensation to protect and extend battery life. They integrate seamlessly with Victron inverters and solar systems for a complete off-grid power solution.
Yes! While Victron lithium battery chargers are optimised for lithium batteries, many models also support lead-acid, AGM, and gel batteries. Always check the specifications to ensure compatibility with your setup.
Absolutely. Victron chargers are built to withstand harsh environments, making them perfect for boats, yachts, and marine applications. They provide safe and efficient charging even in demanding conditions.