Inverters
An inverter can be a useful piece of kit to provide you with flexibility to power a range of devices from your caravans or motorhomes leisure battery
If you are looking for the convenience of a Hybrid Inverter / Solar Charger / Battery Charger check out our range of Iconica Hybrid Inverters
Click here for the Victron Inverters including the Phoenix and Multiplus range
4 Products Found
£1,550.00
Victron Energy EasySolar-II 48/5000/70-50 MPPT 250/100 GX – PMP482507010
The EasySolar-II 48/5000 GX combines an MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure. The product is easy to install, with a minimum of wiring.
Features of the EasySolar-II 48/5000 GX
The all-in-one solar power solution
The Victron EasySolar-II GX integrates the following elements:
A MultiPlus-II inverter/charger
A SmartSolar MPPT -Tr solar charge controller
A GX device with a 2 x 16-character display.
These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.
Display and Wi-Fi
The display reads battery, inverter and solar charge controller parameters.
The same parameters can be accessed with a smartphone or other Wi-Fi enabled device.
In addition, Wi-Fi can be u
sed to set up the system and to change settings.
Solar charge controller
The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger.
The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT.
GX device
The integrated GX device on the EasySolar-II includes:
A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port.
A USB port
An Ethernet port
A VE.Direct port
The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection.
Control over system
Want to have perfect control over your system from wherever you are whilst using your EasySolar-II 48/5000 GX, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.
Brand
Victron Energy
Manufacturer Part Number
PMP482507010
GTIN
8719076049333
Voltage
48V
Cont. Output Power at 25°C
5000VA
Peak Power
9000W
Output AC Voltage
230V
Transfer Switch
50A
Max. AC Input Current
50A
Max. Battery Charge Current
70A
Protection Category
IP21
Efficiency
96%
Bluetooth Compatible
Yes
Dimensions
H604 x W323 x D253mm
Weight
38.6Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
View Product
£666.00
Victron Energy MultiPlus Compact 24/1600 24V 1600VA - CMP241620000
The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.FeaturesTwo AC OutputsThe main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).Virtually unlimited power thanks to parallel operationUp to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.Three phase capabilityIn addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.PowerControl - Dealing with limited generator, shore side or grid powerThe MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.PowerAssist - Boosting the capacity of shore or generator powerThis feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.Solar energy: AC power available even during a grid failureThe MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.System configuringIn case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).On-site Monitoring and controlSeveral options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).Remote Monitoring and controlColor Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.Remote configuringWhen connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely.
GTIN
8719076022039
Voltage
24V
Cont. output power at 25°C
1600VA
Peak Power
3000W
Output AC Voltage
230V
Transfer Switch
16A
Charge Current House Battery
40A
Charge Current Starter Battery
4A
Efficiency
94%
Bluetooth Compatible
No
Protection Category
IP21
Dimensions
H375 x W214 x D110mm
Weight
10Kg
Warranty
5 Years
...Read more
View Product
£475.00
Victron Energy MultiPlus Compact 12/800 12V 800VA - CMP128010000
The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.FeaturesTwo AC OutputsThe main output has no break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example can be connected to this output (second output available on models rated at 3 kVA and more).Virtually unlimited power thanks to parallel operationUp to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.Three phase capabilityIn addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.PowerControl - Dealing with limited generator, shore side or grid powerThe MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.PowerAssist - Boosting the capacity of shore or generator powerThis feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.Solar energy: AC power available even during a grid failureThe MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.System configuringIn case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).On-site Monitoring and controlSeveral options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).Remote Monitoring and controlColor Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.Remote configuringWhen connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed and settings can be changed remotely.
GTIN
8719076022015
Voltage
12V
Cont. output power at 25°C
800VA
Peak Power
1600W
Output AC Voltage
230V
Transfer Switch
16A
Charge Current House Battery
35A
Charge Current Starter Battery
4A
Efficiency
92%
Bluetooth Compatible
No
Protection Category
IP21
Dimensions
H375 x W214 x D110mm
Weight
10Kg
Warranty
5 Years
...Read more
View Product
£1,922.00
Victron Energy Inverter RS 48/6000 230V Smart Solar – PIN482601000
The Inverter RS 48/6000 230V Smart Solar is a combination of a powerful 48VDC, 6kVA 230VAC inverter and a high voltage, 80-450VDC, 4kW MPPT solar charger. Thanks to its modern design and high frequency technology the inverter only weighs 11kg and has an excellent efficiency, low standby power, and very quiet operation.
The inverter is equipped with a display to read out battery, inverter, and solar charger details. These parameters can also be read out via Bluetooth by the VictronConnect app. In addition to this, the inverter has a VE.Can Port for connection to a GX device for system monitoring; and VE.Direct port for connection to a GlobalLink 520.
Features of the RS 48/6000 230V Smart Solar
Off-Grid solar inverter
The Inverter RS Smart Solar 48/6000 is a 48V 6kVA Inverter with 450VDC 4kWp PV input. It is used in off-grid solar applications where AC power is required.
Combination of an inverter, bi-directional DC-DC converter and MPPT
The inverter produces a perfect sine wave, able to supply high powered appliances. It is supplied by a bi-directional DC-DC converter, that can either charge the battery when excess solar power is available or convert from the battery when it is needed.
Wide MPPT voltage range
80 – 450VDC, with a 120VDC PV startup voltage.
Light weight, efficient and quiet
Thanks to high frequency technology and a new design this powerful inverter weighs only 11kg. In addition to this it has an excellent efficiency, low standby power, and a very quiet operation.
Display and Bluetooth
The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Bluetooth enabled device. In addition, Bluetooth can be used to set up the system and to change settings with VictronConnect.
VE.Can and VE.Direct port
For connection to a GX device for system monitoring, data logging, and remote firmware updates of the RS 48/6000 Smart Solar.
Built in PV isolator
Both parallel PV strings connected to the MC4 plugs can be safely isolated with the large built-in switch on the bottom of the unit.
I/O Connections
Programmable Relay, temperature sensor and voltage sensor connections. The remote input can also be configured to accept the Victron smallBMS.
Control over system
Want to have perfect control over your system from wherever you are whilst using your Inverter RS 48/6000 Smart Solar, why not have a look at the Cerbo GX. Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or the VictronConnect App thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.
Brand
Victron Energy
Manufacturer Part Number
PIN482601000
GTIN
8719076048176
Voltage
48V
Cont. Output Power at 25°C
6000VA
Peak Power
9 kW for 3 seconds
Output AC Voltage
230V
Protection Category
IP21
Bluetooth Enabled
Yes
Dimensions
H425 x W440 x D125mm
Weight
11Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
View Product
0 Kits Selected✕
Recommended Full Kits
Loading...
£3,096.12
£2,658.96
£2,576.49
£2,409.49
£2,998.30
£2,610.30
Loading...
£2,576.49
£2,409.49
£2,438.68
£2,223.66
£2,998.30
£2,610.30
£1,392.64
£2,129.28
£2,316.26
£2,223.66
Loading...
£3,997.58
£4,130.58
£3,780.58
£3,096.12
£2,658.96
£2,576.49
£2,409.49
£3,485.57
Loading...
£1,287.58
£1,019.18
£1,543.99
£2,373.90
£1,681.63
£1,287.58
£1,019.18
£1,543.99