Electrical
We are regularly adding new items to this section; here we have just about everything electrical you might need for your Caravan, Camper, Campervan, Motorhome or Boat including products from Victron, Blue Sea and CBE
723 Products Found
£44.99
Waterproof 20A 12V/24V Solar Charge Controller / Regulator For Caravans, Motorhomes
This high quality waterproof 20A 12V/24V solar charge controller is designed to protect batteries whilst charging them, having automatic cut off to prevent over-charging and deep discharge. The controller uses PWM (Pulse Width Modulation) technology which increases charge acceptance and prolongs the life of your battery. Often PWM technology can recover some lost battery capacity.
This controller stops reverse current at night (from the battery back to the solar panel) so your battery won't lose any charge. It has many other protection functions such as over charge / discharge, over load, short circuit, overheating etc. Other features of this controller include LED indicators, temperature sensor, battery type selection, dual timer function and several load work modes.
This controller can work with sealed, gel and flooded batteries (simpler controllers can only work with one battery type). In addition, it can accept a wide range of solar input voltage up to 50V, so this controller can work not only with standard off-grid solar modules, but also with on-grid panels which have higher voltage. The controller can handle up to 320W (with 12V batteries) / 640W (with 24V batteries) of solar panels, which makes it a perfect choice for small or medium solar PV systems with a battery and load such as in a camper van or boat.
In addition, the solar charge controller has a very high degree of water protection - IP67 (which means it's completely sealed), so it is absolutely safe to use this solar kit in all weather conditions.
Further to the built-in temperature sensor there is an external temperature sensor located on the controller to measure the ambient temperature more precisely and optimise the charging process.
...Read more
View Product
£980.99
Victron Energy LiFePO4 Battery 12.8V 160Ah Smart – BAT512116610
Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery therefore consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series.
Features
Rugged
A lead-acid battery will fail prematurely due to sulfation:
If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).
If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).
A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid. Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency (see below).
LFP is therefore the chemistry of choice for demanding applications.
Efficient
In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance.
The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average leadacid battery is 80%.
The round-trip energy efficiency of a LFP battery is 92%.
The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state). In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions.
Size and weight
Saves up to 70% in space Saves up to 70% in weight
Expensive?
LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency.
Bluetooth
With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance.
BMS
Our LFP batteries have integrated cell balancing and cell monitoring. Up to 5 batteries can be paralleled and up to four 12V batteries or two 24V batteries can be series connected, so that a 48V battery bank of up to 1500Ah can be assembled. The cell balancing/monitoring cables can be daisy-chained and must be connected to a Battery Management System (BMS).
Brand
Victron Energy
Manufacturer Part Number
BAT512116610
GTIN
8719076048930
Voltage
12.8V
Battery Capacity (C20)
160Ah
Terminal Type
M10
Terminal Layout
Right Hand Positive
Dimensions (Including Terminals)
H237 x W321 x D152mm
Weight
33Kg
Warranty
3 Years
Country of Manufacture
China
Battery Technology
Lithium
Battery Application
Deep Cycle
...Read more
View Product
£81.48
Victron Energy Blue Smart IP65s Charger 12V 4A 1 Output UK – BPC120433024R
The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Benefits
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Features
Water, dust and chemical resistant
Seven step smart charge algorithm
Recovery of fully discharged ‘dead’ batteries
Automatic power supply function
Severe cold performance: down to -30°C
Several other battery life enhancing features
Low power mode to charge smaller batteries
Li-ion battery mode
Setup and configure, readout of voltage and current by Bluetooth Smart
Brand
Victron Energy
Manufacturer Part Number
BPC120433024R
GTIN
8719076044604
Voltage
12V
Charge Current
4A
Input Voltage
230V
Number of Outputs
1
Protection Category
IP65 (splash and dust proof)
Efficiency
94%
Bluetooth Enabled
Yes
Plug Type
UK
Dimensions
H45 x W81 x D182mm
Weight
0.9Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
View Product
£212.39
Victron Energy Blue Smart IP65 Charger 24V 13A 1 Output UK – BPC241331024
The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Benefits
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Features
Water, dust and chemical resistant
Seven step smart charge algorithm
Recovery of fully discharged ‘dead’ batteries
Automatic power supply function
Severe cold performance: down to -30°C
Several other battery life enhancing features
Low power mode to charge smaller batteries
Li-ion battery mode
Setup and configure, readout of voltage and current by Bluetooth Smart
Brand
Victron Energy
Manufacturer Part Number
BPC241331024
GTIN
8719076051589
Voltage
24V
Charge Current
13A
Input Voltage
230V
Number of Outputs
1
Protection Category
IP65 (splash and dust proof)
Efficiency
95%
Bluetooth Enabled
Yes
Plug Type
UK
Dimensions
H75 x W140 x D240mm
Weight
1.9Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
View Product
£117.56
Victron Energy Blue Smart IP65 Charger 12V 7A 1 Output UK – BPC120731024R
The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Benefits
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Features
Water, dust and chemical resistant
Seven step smart charge algorithm
Recovery of fully discharged ‘dead’ batteries
Automatic power supply function
Severe cold performance: down to -30°C
Several other battery life enhancing features
Low power mode to charge smaller batteries
Li-ion battery mode
Setup and configure, readout of voltage and current by Bluetooth Smart
Brand
Victron Energy
Manufacturer Part Number
BPC120731024R
GTIN
8719076039747
Voltage
12V
Charge Current
7A
Input Voltage
230V
Number of Outputs
1
Protection Category
IP65 (splash and dust proof)
Efficiency
94%
Bluetooth Enabled
Yes
Plug Type
UK
Dimensions
H47 x W95 x D190mm
Weight
0.9Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
View Product
£409.99
Sterling Power Battery to Battery Charger, Non Waterproof 24/12V 35A – BB241235
Sterling’s range of Battery to Battery Chargers (B2Bs) has grown significantly over the past few years. Offering a product range in this market unsurpassed by anyone in both power and flexibility. This is in an effort to supplement the ever growing demand from the commercial vehicle, recreational vehicle and marine industries. The B2Bs have become extremely popular as they fast charge batteries as you cruise along without the need for complex wiring, touching your alternator, voiding the alternator’s warranty and tampering with the electronic control units (ECUs). You can provide the onboard batteries with a fast 4 stage charging profile with a very simple and speedy installation. All of the benefits of advanced charging without any of the drawbacks. Simply connect the B2B between the battery being charged and the battery you wish to charge.
Features
Multiple Activation Modes: Automatic for most non vehicle applications
Manual for remote activation.
Regenerative braking (requiring ignition feed),
Automatic regenerative braking, requiring no ignition feed.
Output charging at 12V, 24V, 36V and 48V. Input voltages at 12V and 24V, Up to 800W rating.
Much larger model up to 3000W coming soon.
Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mode allows you to override this.
Safety features
100% fire proof plastic box.
No screws to corrode.
Thermal power reduction.
Multi stage fan cooling
Night Time Setting: Allows the unit to run at half the power so the fan noise is kept down.
Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages.
B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V).
Customizable Profile: Choose your own charging profile on the front panel.
9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid.
4 stage battery charging: Thge B2B charges batteries between 5-20 times faster than a stand alone alternator.
Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking).
Remote control is optional.
DC to DC (Battery to Battery) Wiring Diagram, Information and Help
...Read more
View Product
£409.99
Sterling Power Battery to Battery Charger, Non Waterproof 12/48V 70A – BB124870
Sterling’s range of Battery to Battery Chargers (B2Bs) has grown significantly over the past few years. Offering a product range in this market unsurpassed by anyone in both power and flexibility. This is in an effort to supplement the ever-growing demand from the commercial vehicle, recreational vehicle and marine industries. The B2Bs have become extremely popular as they fast charge batteries as you cruise along without the need for complex wiring, touching your alternator, voiding the alternator’s warranty and tampering with the electronic control units (ECUs). You can provide the onboard batteries with a fast 4 stage charging profile with a very simple and speedy installation. All of the benefits of advanced charging without any of the drawbacks. Simply connect the B2B between the battery being charged and the battery you wish to charge.
Features
Multiple Activation Modes: Automatic for most non vehicle applications
Manual for remote activation.
Regenerative braking (requiring ignition feed),
Automatic regenerative braking, requiring no ignition feed.
Output charging at 12V, 24V, 36V and 48V. Input voltages at 12V and 24V, Up to 800W rating.
Much larger model up to 3000W coming soon.
Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mde allows you to override this.
Safety features
100% fire proof plastic box.
No screws to corrode.
Thermal power reduction.
Multi stage fan cooling
Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down.
Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages.
B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V).
Customizable Profile: Choose your own charging profile on the front panel.
9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid.
4 stage battery charging: The B2B charges batteries between 5-20 times faster than a stand alone alternator.
Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking).
Remote control optional.
DC to DC (Battery to Battery) Wiring Diagram, Information and Help
Brand
Sterling Power
Manufacturer Part Number
BB124870
DC V (in)
12
DC V (out)
48
Current (A)
70
Dimensions
L190 x W160 x D70mm
Weight (kg)
1.4
Warranty
2 Years
...Read more
View Product
£409.99
Sterling Power Battery to Battery Charger, Non Waterproof 12/36V 70A – BB123670
Sterling’s range of Battery to Battery Chargers (B2Bs) has grown significantly over the past few years. Offering a product range in this market un surpassed by anyone in both power and flexibility. This is in an effort to supplement the ever growing demand from the commercial vehicle, recreational vehicle and marine industries. The B2Bs have become extremely popular as they fast charge batteries as you cruise along without the need for complex wiring, touching your alternator, voiding the alternator’s warranty and tampering with the electronic control units (ECUs). You can provide the onboard batteries with a fast 4 stage charging profile with a very simple and speedy installation. All of the benefits of advanced charging without any of the draw backs. Simply connect the B2B between the battery being charged and the battery you wish to charge.
Features
Multiple Activation Modes: Automatic for most non vehicle applications
Manual for remote activation.
Regenerative braking (requiring ignition feed),
Automatic regenerative braking, requiring no ignition feed.
Output charging at 12V, 24V, 36V and 48V. Input voltages at 12V and 24V, Up to 800W rating.
Much larger model up to 3000W coming soon.
Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mde allows you to override this.
Safety features
100% fire proof plastic box.
No screws to corrode.
Thermal power reduction.
Multi stage fan cooling
Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down.
Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages.
B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V).
Customizable Profile: Choose your own charging profile on the front panel.
9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid.
4 stage battery charging: Thge B2B charges batteries between 5-20 times faster than a stand alone alternator.
Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking).
Remote control optional.
DC to DC (Battery to Battery) Wiring Diagram, Information and Help
Brand
Sterling Power
Manufacturer Part Number
BB123670
DC V (in)
12
DC V (out)
36
Current (A)
70
Dimensions
L190 x W160 x D70mm
Weight (kg)
1.4
Warranty
2 Years
...Read more
View Product
Out of Stock
£88.99
Titanium DC31MF Leisure Battery
This heavy duty deep cycle battery is designed to meet the needs of leisure and marine vehicles. With its sealed calcium construction which makes it 100% maintenance free this battery is fast becoming a favourite within the industry.
This range is suited to seasonal use such as Caravans Motorhomes Boats RV Camping and much more.
The product is supplied charged and ready to fit.
Features
Excellent design handle – Easy battery replacement
Integrated computer designed and reinforced container – Protection from vibrations and impact
Sealed covers – Prevents acid leaks and minimizes gassing
Totally sealed and spill proof
Maintenance Free – no topping up required
Glass fibre separators
Safety venting system
Sealed water recombination system
Tough polypropylene case design
...Read more
£654.99
Sterling Power Pro Charge Ultra Battery Charger 36V 20A (3 out) – PCU3620
With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market.
Features
Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity.
Battery Temperature compensation sensor included.
Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated.
Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections.
Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability.
Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V).
Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses.
Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish
11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel.
Brand
Sterling Power
Manufacturer Part Number
PCU3620
Voltage
36
Charger Amps
Dimensions
L315 x W215 x D90mm
Weight (kg)
3
Warranty
2 Years
...Read more
View Product
£549.99
Sterling Power Pro Charge Ultra Battery Charger 24V 20A (3 out) – PCU2420
With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market.
Features
Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity.
Battery Temperature compensation sensor included.
Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated.
Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections.
Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability.
Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V).
Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses.
Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish
11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel.
Brand
Sterling Power
Manufacturer Part Number
PCU2420
Voltage
24
Charger Amps
Dimensions
L260 x W215 x D90mm
Weight (kg)
2
Warranty
5 Years
...Read more
View Product
Out of Stock
£266.99
Exide EP900 Dual AGM Battery (WG31) 100Ah 720cca
Exide EP900 Dual AGM Battery (WG31) 100Ah 720cca
Exide DUAL AGM battery range is designed for boats and caravans with one battery bank for all consumers. It is also suitable for additional batteries applied directly to electrical winches, thrusters and trolling motors. The batteries are partially discharged during use. DUAL AGM’s reinforced design, combined with a good recharging procedure, is key to providing the best result and service life.
The DUAL AGM battery range, with Wh* performance from 450-2100 Wh, is the ideal choice to cover all dual-supply needs for the most popular recreational boats.
BENEFITS
Ideal for most popular range of motorhomes & caravans
High mounting flexibility
Maintenance free
High vibration & tilt resistant, spill-proof, leak-proof
With AGM technology (absorbed glass mat flat plate or orbital) with VRLA venting (valve regulated) , Wh* performance range coverage goes from 450Wh to 2100Wh
Manufacturer: ExidePart Number: EP900Weight: 32kgLength: 330mmWidth: 173mmHeight: 240mmVoltage: 12VCapacity (AH): 100Cold Cranking (EN): 720Terminal Layout: + leftBattery Type: AGMWarranty: 12 MonthsApplication: Engine Start
...Read more
Out of Stock
£111.10
Exide EP500 Dual AGM Battery (027) 60Ah 680cca
Exide EP500 Dual AGM Battery (027) 60Ah 680cca
Exide DUAL AGM battery range is designed for boats and caravans with one battery bank for all consumers. It is also suitable for additional batteries applied directly to electrical winches, thrusters and trolling motors. The batteries are partially discharged during use. DUAL AGM’s reinforced design, combined with a good recharging procedure, is key to providing the best result and service life.
The DUAL AGM battery range, with Wh* performance from 450-2100 Wh, is the ideal choice to cover all dual-supply needs for the most popular recreational boats.
BENEFITS
Ideal for most popular range of motorhomes & caravans
High mounting flexibility
Maintenance free
High vibration & tilt resistant, spill-proof, leak-proof
With AGM technology (absorbed glass mat flat plate or orbital) with VRLA venting (valve regulated) , Wh* performance range coverage goes from 450Wh to 2100Wh
Manufacturer: ExidePart Number: EP500Weight: 17.9kgLength: 242mmWidth: 175mmHeight: 190mmVoltage: 12VCapacity (AH): 60Cold Cranking (EN): 680Terminal Layout: + rightBattery Type: AGMWarranty: 12 MonthsApplication: Engine Start
...Read more
Out of Stock
£173.99
Exide EP450 Dual AGM Battery (MAX900DC) 50Ah 750cca
Exide EP450 Dual AGM Battery (MAX900DC) 50Ah 750cca
Exide DUAL AGM battery range is designed for boats and caravans with one battery bank for all consumers. It is also suitable for additional batteries applied directly to electrical winches, thrusters and trolling motors. The batteries are partially discharged during use. DUAL AGM’s reinforced design, combined with a good recharging procedure, is key to providing the best result and service life.
The DUAL AGM battery range, with Wh* performance from 450-2100 Wh, is the ideal choice to cover all dual-supply needs for the most popular recreational boats.
BENEFITS
Ideal for most popular range of motorhomes & caravans
High mounting flexibility
Maintenance free
High vibration & tilt resistant, spill-proof, leak-proof
With AGM technology (absorbed glass mat flat plate or orbital) with VRLA venting (valve regulated) , Wh* performance range coverage goes from 450Wh to 2100Wh
Manufacturer: ExidePart Number: EP450Weight: 19kgLength: 260mmWidth: 173mmHeight: 206mmVoltage: 12VCapacity (AH): 50Cold Cranking (EN): 750Terminal Layout: + leftBattery Type: AGMWarranty: 12 MonthsApplication: Engine Start
...Read more
Out of Stock
£389.99
EXIDE DUAL AGM - Superior Battery - EP1500 180AH
Exide EP1500 Dual AGM Battery (629) 180Ah 900cca
Exide DUAL AGM battery range is designed for boats and caravans with one battery bank for all consumers. It is also suitable for additional batteries applied directly to electrical winches, thrusters and trolling motors. The batteries are partially discharged during use. DUAL AGM’s reinforced design, combined with a good recharging procedure, is key to providing the best result and service life.
The DUAL AGM battery range, with Wh* performance from 450-2100 Wh, is the ideal choice to cover all dual-supply needs for the most popular recreational boats.
BENEFITS
Ideal for most popular range of motorhomes & caravans
High mounting flexibility
Maintenance free
High vibration & tilt resistant, spill-proof, leak-proof
With AGM technology (absorbed glass mat flat plate or orbital) with VRLA venting (valve regulated) , Wh* performance range coverage goes from 450Wh to 2100Wh
Dimensions
513 × 223 × 223 mm
Brand
Exide
Battery Type
AGM/EFB
Battery by Application
All Batteries, Leisure, Marine
Battery Voltage (V)
12V
Battery Warranty
2 Years Limited Warranty
...Read more
Out of Stock
£306.99
Exide Dual EP1200 leisure battery 12V 140Ah
Exide EP1200 Dual AGM Battery (627) 140Ah 700cca
Exide DUAL AGM battery range is designed for boats and caravans with one battery bank for all consumers. It is also suitable for additional batteries applied directly to electrical winches, thrusters and trolling motors. The batteries are partially discharged during use. DUAL AGM’s reinforced design, combined with a good recharging procedure, is key to providing the best result and service life.
The DUAL AGM battery range, with Wh* performance from 450-2100 Wh, is the ideal choice to cover all dual-supply needs for the most popular recreational boats.
BENEFITS
Ideal for most popular range of motorhomes & caravans
High mounting flexibility
Maintenance free
High vibration & tilt resistant, spill-proof, leak-proof
With AGM technology (absorbed glass mat flat plate or orbital) with VRLA venting (valve regulated) , Wh* performance range coverage goes from 450Wh to 2100Wh
Weight
45 kg
Dimensions
513 × 189 × 223 mm
Brand
Exide
Battery Type
AGM/EFB
Battery by Application
All Batteries, Leisure, Marine
Battery Voltage (V)
12V
Battery Warranty
2 Years Limited Warranty
...Read more
£308.99
Victron Energy BlueSolar MPPT 150/60 MC4 – SCC010060300
Victron Energy BlueSolar MPPT 150/60 MC4 – SCC010060300
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.
Features
Ultrafast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%. The full output current up to 40°C (104°F).
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Real-time data display options
– ColorControl GX or other GX devices: see the Venus documents on our website.
– A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed.
Brand
Victron Energy
Manufacturer Part Number
SCC010060300
GTIN
8719076025481
Voltage
12/24/48V
Rated Charge Current
60A
Nominal PV Power, 12V
860W
Max. PV Short Circuit Current
50A
Max. PV Open Circuit Voltage
150V absolute maximum coldest conditions 145V start-up and operating maximum
Protection Category
IP43 (electronic components), IP22 (connection area)
Efficiency
98%
Bluetooth Enabled
No
Dimensions
H215 x W250 x D95mm
Weight
3Kg
Warranty
5 Years
...Read more
View Product
£366.00
Victron Energy BlueSolar MPPT 150/45 MC4 – SCC010045300
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.
Features
Ultrafast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%. The full output current up to 40°C (104°F).
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Real-time data display options
– ColorControl GX or other GX devices: see the Venus documents on our website.
– A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed.
Brand
Victron Energy
Manufacturer Part Number
SCC010045300
GTIN
8719076025443
Voltage
12/24/48V
Rated Charge Current
45A
Nominal PV Power, 12V
650W
Max. PV Short Circuit Current
50A
Max. PV Open Circuit Voltage
150V absolute maximum coldest conditions 145V start-up and operating maximum
Protection Category
IP43 (electronic components), IP22 (connection area)
Efficiency
98%
Bluetooth Enabled
No
Dimensions
H215 x W250 x D95mm
Weight
3Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
View Product
£499.99
Victron Energy SmartSolar MPPT 250V 85A MC4 VE.Can – 250/85 SCC125085511
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Features
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth
A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers.
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
VE.Can: the multiple controller solution
Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display
Brand
Victron Energy
Manufacturer Part Number
SCC125085511
Voltage
12/24/48V
Rated Charge Current
85A
Nominal PV Power, 12V
1200W
Max. PV Short Circuit Current
70A (max 30A per MC4 conn.)
Max. PV Open Circuit Voltage
250V absolute maximum coldest conditions 245V start-up and operating maximum
Protection Category
IP43 (electronic components), IP22 (connection area)
Efficiency
99%
Bluetooth Enabled
Yes
Dimensions
H216 x W295 x D103mm
Weight
4.5Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
View Product
£399.99
Victron Energy SmartSolar MPPT 250V 60A MC4 – SCC125060321
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Features
Remote Monitoring and Control
Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520.
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage, temperature and current sensing via Bluetooth
A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers.
Synchronized parallel charging with Bluetooth
Up to 10 units can be synchronized with Bluetooth.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.
Brand
Victron Energy
Manufacturer Part Number
SCC125060321
GTIN
8719076050858
Voltage
12/24/48V
Rated Charge Current
60A
Nominal PV Power, 12V
860W
Max. PV Short Circuit Current
35A (max 30A per MC4 conn.)
Max. PV Open Circuit Voltage
250V absolute maximum coldest conditions 245V start-up and operating maximum
Protection Category
IP43 (electronic components), IP22 (connection area)
Efficiency
99%
Bluetooth Enabled
Yes
Dimensions
H215 x W250 x D95mm
Weight
3Kg
Warranty
5 Years
...Read more
View Product
£525.99
Victron Energy SmartSolar MPPT 150V 100A MC4 VE.Can – 150/100 SCC115110511
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Features
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth
A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers.
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function.
VE.Can: the multiple controller solution
Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display
Brand
Victron Energy
Manufacturer Part Number
SCC115110511
GTIN
8719076050360
Voltage
12/24/48V
Rated Charge Current
100A
Nominal PV Power, 12V
1450W
Max. PV Short Circuit Current
70A (max 30A per MC4 conn.)
Max. PV Open Circuit Voltage
150V absolute maximum coldest conditions 145V start-up and operating maximum
Protection Category
IP43 (electronic components), IP22 (connection area)
Efficiency
98%
Bluetooth Enabled
Yes
Dimensions
H246 x W295 x D103mm
Weight
4.5Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
View Product
£475.99
Victron Energy SmartSolar MPPT 150V 85A MC4 VE.Can – 150/85 SCC115085511
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Features
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth
A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers.
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with an integrated disconnect function.
VE.Can: the multiple controller solution
Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display
Brand
Victron Energy
Manufacturer Part Number
SCC115085511
GTIN
8719076050346
Voltage
12/24/48V
Rated Charge Current
85A
Nominal PV Power, 12V
1200W
Max. PV Short Circuit Current
70A (max 30A per MC4 conn.)
Max. PV Open Circuit Voltage
250V absolute maximum coldest conditions 245V start-up and operating maximum
Protection Category
IP43 (electronic components), IP22 (connection area)
Efficiency
98%
Bluetooth Enabled
Yes
Dimensions
H246 x W295 x D103mm
Weight
4.5Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
View Product
Out of Stock
£899.47
Rolls Low Profile S12-135LFP 135ah Lithium LiFePO4 Battery
Rolls high-performance LiFePO4 batteries offer exceptional cycle life and are up to 50% lighter than equivalent lead-acid models.
Design
standard-size (BCI) low profile ABS container for easy VRLA replacement Fast charge/discharge performance Maintenance-free operation
Battery Management System (BMS)
integrated hardware BMS inside.Independent charge & discharge protectionOver-Voltage Protection (OVP), Low-Voltage Protection (LVP) Over-Current Protection (OCP), Over-Temperature Protection (OTP)
Safety
Prismatic LiFePO4 cells offer longer cycle life & added safety IEC62133, UL, UN38.3 cell certificationUN38.3, CE system certification, IP65 Rating
See Product Image for Specifications
...Read more
£124.99
Cyrix-ct 12/24V-230A Intelligent Battery Combiner
The Cyrix Battery Combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged).
Cyrix Battery Combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased.
Specifications:
Continuous current: 230A
Cranking current (5 secs): 500A
Standby consumption: <4mA
Rated voltage: 12V / 24V
Terminal size: 8mm
Dimensions: 65 x 100 x 50 mm
Weight: 270g
Cyrix-ct Datasheet
Cyrix-ct 12/24V-230A Intelligent Battery Combiner Datasheet
Cyrix Wiring Diagram
...Read more
View Product
£349.00
TN Power Lithium 12V 54Ah Leisure Battery LiFePO4
54Ah Lithium Leisure Battery
A huge advantage to lithium technology is the life cycle rating which far surpasses alternative technologies. This specific item has 7000 charge and discharge cycles at a depth of 50%
Features
Using the technology of lithium iron phosphate cell, superior safety, thousands of cycles, 100%DOD, under normal conditions
Built-in automatic protection for over-charge, over discharge, over current and over temperature
Free of maintenance
Internal cell balancing
Lighter weight: About 40% -50% of the weight of a comparable lead acid battery
Can be charged using most standard lead-acid charges (set)
Wider temperature range:-20°C-60°C
Support for Series application expansion (up to 51.2V) and two in parallel
Applications
UPS
Solar &Wind Power System
Golf Cart
Electric Vehicle , E-bike, E-rickshaw etc.
Lighting
Motorhomes
Campervans
Caravans
...Read more
View Product
Out of Stock
£649.00
TN Power 12.8v 100Ah Lithium Iron Phosphate (LiFePO4) Battery PN: TN-LFP12.8V100AH
100Ah Lithium LiFePO4 Leisure Battery
A huge advantage to lithium technology is the life cycle rating which far surpasses alternative technologies. This specific item has 7000 charge and discharge cycles at a depth of 50%
Features
Using the technology of lithium iron phosphate cell, superior safety, thousands of cycles, 100%DOD, under normal conditions
Built-in automatic protection for over-charge, over discharge, over current and over temperature
Free of maintenance
Internal cell balancing
Lighter weight: About 40% -50% of the weight of a comparable lead acid battery
Can be charged using most standard lead-acid charges (set)
Wider temperature range:-20°C-60°C
Support for Series application expansion (up to 51.2V) and two in parallel
Applications
UPS
Solar &Wind Power System
Golf Cart
Electric Vehicle , E-bike, E-rickshaw etc.
Lighting
Motorhomes
Camper vans
Caravans
Brand
TN Power
Manufacturer Part Number
TN100
Voltage
12V
Capacity (C20)
100Ah
Terminal Type
M8
Terminal Layout
LH+
Dimensions (Including Terminals)
L328 x W172 x H220mm
Weight
13.1Kg
Warranty
4 Years
Battery Technology
Lithium
Battery Application
Deep Cycle
Country of Manufacture
China
...Read more
Out of Stock
£518.99
Rolls Battery AGM R12-260AGM
Specifications
Weight
73 kg
161 lbs
Length
52.2 cm
20.55"
Width
26.8 cm
10.55"
Height Inc. Term.
22.4 cm
8.82"
Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels.
Container
ABS
Cover
ABS
Handles
Rope
Series
AGM-R
Warranty
See Warranty Terms
Volts
12
BCI
8D
Cells
6
Terminal Type
F8
Included Hardware
Stainless Steel Nuts & Bolts
Size & Thread
M8
Charge
Charge Voltage Range
14.7V @ 25°C (77°F)
Float Voltage Range
13.8V @ 25°C (77°F)
Recommended Charge Current
50 A
Maximum Charge Current
60 A
Self-Discharge Rate
Less than 2% per month at 25°C (77°F)
Capacity
Cold Crank Amps (CCA) 0°F / -18°C
1500
Marine Crank Amps (MCA) 32°F / 0°C
1800
Reserve Capacity (RC @ 25A)
500 Minutes
Reserve Capacity (RC @ 75A)
140 Minutes
Capacity Affect by Temperature
40°C(104°F)
25°C(77°F)
0°C(32°F)
-15°C(5°F)
102%
100%
85%
65%
Hour Rate
Capacity / AMP Hour
Current / AMPs
@ 100 Hour Rate
290 AH
2.9 A
@ 20 Hour Rate
260 AH
13 A
@ 10 Hour Rate
200 AH
20 A
@ 5 Hour Rate
185 AH
37 A
Cut Off Voltage
Constant Current Discharge
VPC
1 hr
2 hr
3 hr
5 hr
8 hr
10 hr
130
96
56
38
81
21.6
...Read more
Out of Stock
£504.99
Rolls Series 5 S12-240 AGM Deep Cycle Battery
Deep cycle refers to applications that typically discharge 60-80% of the battery capacity. The Rolls S Series S12-240 AGM Deep Cycle AGM battery features thick plates with a high density active material. This design allows for reserve energy to be stored deep within the battery plates and released during slow discharge. The Rolls AGM range are sealed, non hazardous and completely maintenance free and?will suit the customer looking for a long reliable, maintenance free service life.
Rolls has designed a Deep Cycle VRLA battery with high reserve capacity, long cycle life and low internal resistance, while achieving superior cranking performance. Rolls AGM batteries are the smart choice for demanding renewable applications.They are designed and built differently than standard batteries. They use more lead, heavier plates and other proprietary materials that enable them to deliver more power and capacity over many life cycles.
Specifications
Weight
63.5 kg
140 lbs
Length
38.1 cm
15"
Width
17.8 cm
7.01"
Height Inc. Term.
37.1 cm
14.61"
Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process, battery components & electrolyte levels.
Container
ABS
Cover
ABS
Handles
Rope / Plastic Handle
Series
AGM-S
Warranty
See Warranty Terms
Volts
12
BCI
J185
Cells
6
Terminal Type
DT
Included Hardware
Stainless Steel Nuts & Bolts
Size & Thread
DT
Charge
Charge Voltage Range
14.7V @ 25°C (77°F)
Float Voltage Range
13.8V @ 25°C (77°F)
Recommended Charge Current
45 A
Maximum Charge Current
65 A
Self-Discharge Rate
Less than 2% per month at 25°C (77°F)
Internal Resistance
2.3 mΩ
Capacity
Cold Crank Amps (CCA) 0°F / -18°C
1000
Marine Crank Amps (MCA) 32°F / 0°C
1200
Reserve Capacity (RC @ 25A)
420 Minutes
Reserve Capacity (RC @ 75A)
110 Minutes
Capacity Affect by Temperature
40°C(104°F)
25°C(77°F)
0°C(32°F)
-15°C(5°F)
102%
100%
85%
65%
Hour Rate
Capacity / AMP Hour
Current / AMPs
@ 100 Hour Rate
240 AH
2.4 A
@ 20 Hour Rate
215 AH
10.75 A
@ 10 Hour Rate
193 AH
19.3 A
@ 5 Hour Rate
172 AH
34.4 A
Cut Off Voltage
Constant Current Discharge
VPC
1 hr
2 hr
3 hr
5 hr
8 hr
10 hr
112
66.1
50.6
33.7
22.7
19.3
View all Rolls Batteries
...Read more
£18.63
Sterling 1 amp 12V Battery charger
Sterling 1A 12V Battery charger: Fully automatic microprocessor controlled LED display for 6V and 12V batteries 3-stage charging profile: bulk-absorption-float User-friendly screen: LED indicates charging status, full, fault Fault diagnostic system Overheat protection, short-circuit protection, reverse polarity protection Low input voltage and over voltage protection
Voltage DC Amps AC Plug L x W x D mm Weight Kg
12 1 British 135 x 50 x 40 0.35
...Read more
View Product
£47.99
Split Charge Diode - 70A 1 in 3 out
Sterling has developed a range of low cost split charge diodes. These diodes have enhanced performance over conventional diodes and at a lower cost. The difference is in the devices. All other split charge diode manufacturers use conventional alternator diodes, which at low current flow have about a 0.93 voltage drop. When the full rated current of these diodes is approached, the voltage drop increases to about 0.95 volts. Specification: Alt Input: 1 Battery Banks: 2 Output: 90A For cable information for all Sterling Products click here
...Read more
View Product
£70.20
Split Charge Diode - 90A 1 in 3 out - Diode Block
Sterling has developed a range of low cost split charge diodes. These diodes have enhanced performance over conventional diodes and at a lower cost. The difference is in the devices. All other split charge diode manufacturers use conventional alternator diodes, which at low current flow have about a 0.93 voltage drop. When the full rated current of these diodes is approached, the voltage drop increases to about 0.95 volts. Specification: Alt Input: 1 Battery Banks: 3 Output: 90A
For cable information for all Sterling Products click here
...Read more
View Product
£355.99
Pro Split R 12V 2 x 130A 4 Out Split Isolator
The ProSplit R is an advanced split charge management device, developed specifically to deal with the complex nature of modern multi battery systems in boats and vehicles. For single or dual alternator inputs to two, three or four battery bank installations. Complex software with some 1000 lines of code analyses every perceivable condition to ensure charging priorities are managed as you want with specific focus on preserving charge in the engine starter battery. Each input & output terminal is independently monitored to establish status before deciding where charge will be delivered and to prevent discharge from one battery to another. Truly zero voltage drop is one key feature of the Pro Split R. Many alternative products claim to have no voltage loss but, under test, are proven not to be so - especially with heavy loads - when it really matters. It may not seem significant but 1V drop equates to as much as 30% lost charging power in a 12V system. Unlike conventional Voltage Sensitive Relays (VSRs), the ProSplit R has the ability to identify and reverse current or over-voltage conditions and disconnect individual batteries to avoid damage or discharge. The ignition sense connection also ensures that the device knows the engine is running and protects the start battery when the engine is off. For cable information for all Sterling Products click here Specification: Alt Volts: 12 Max Alt Amps: Twin 130 Output Battery Bank: 4 out Unit Size (mm): 150 x 80 x 295 Unit Weight (kg): 1.8
...Read more
View Product
£308.99
Victron Energy BlueSolar MPPT 150/60-Tr – Solar Charge Controller - SCC010060200
Victron Energy BlueSolar MPPT 150/60-Tr – Solar Charge Controller - SCC010060200
The Victron 150V 60A MPPT controller comes from the intelligent BlueSolar range, which uses the latest ultrafast MPPT technology to maximise energy harvest whilst maintaining optimal battery health. BlueSolar MPPT controllers uniquely boast an intelligent battery life function, along with advanced communication options for remote system monitoring.Ultrafast MPPT Technology:This 60A MPPT solar charge controller is designed to deliver the highest possible energy yield in the shortest amount of time. This is achieved through the use of high speed Maximum Power Point Tracking technology, which tracks the maximum power voltage point of the solar panels as it varies depending on sunlight exposure and temperature. This technology enables the controller to produce up to 30% greater energy yield than PWM controllers and as much as 10% more power than slower MPPT controllers. This advanced technology allows the controller to perform extremely well in low-light or cloudy conditions, as the controller consistently strives to extract the maximum available power from the solar array.Inbuilt safety protection:Fully equipped with an extensive range of safety features, this controller offers complete protection against potential hazards such as PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity and battery overheating - monitored via the internal temperature sensor. The controller also has self-diagnostic capability and highlights any system errors using sophisticated fault-targeting technology. These are signalled via the high intensity LED indicators. Advanced programming and monitoring:The user can connect an optional MPPT Control panel (sold separately) to the controller to access a range of monitoring and programming functions. The display shows charging parameters (voltage, current, power) for the solar panel and battery as well as 30 day performance data. The user can also set the duration and voltage of each charging stage. Alternatively, by connecting the controller to a Victron VE Direct Bluetooth Dongle, or the VE Direct USB cable (both sold separately), the user can gain access to the VictronConnect App, which unlocks numerous possibilities for advanced programming and remote monitoring of your BlueSolar system. Once the controller is paired with the app, a wide range of additional features are made available, including:Live data transmission: Real-time information is displayed including solar panel output, battery voltage and current (flowing into and out of the battery) as well as battery state of charge.Detailed data logs: System activity for the past 30 days is available to view; either as in-depth daily logs or as a monthly summary. These easy-view graphics display daily energy yield, maximum recorded power and voltage, time spent in each charging stage, minimum and maximum recorded battery voltages, error records and total energy counters.User-defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including user-defined absorption voltage, absorption time, float voltage, equalisation voltage and temperature compensation settings.The VictronConnect app is compatible with most mobile devices and computers, including Android and iOS smartphones, tablets, iPads, MacBooks, Windows PCs/laptops.Other features:The Victron BlueSolar MPPT 150-60 model is ideal for a wide range of applications as it is resistant to extreme temperatures, high altitudes, dusty environments and marine environments. The unit enclosure is IP43 water resistant with resin encapsulation of the internal electrical components and has a PD3 pollution rating.This solar charge controller is also compatible with a wide range of battery types, including AGM, Gel, Tubular plate and Lithium batteries.
Brand
Victron Energy
Manufacturer Part Number
SCC010060200
GTIN
8719076025474
Voltage
12/24/48V
Rated Charge Current
60A
Nominal PV Power, 12V
860W
Max. PV Short Circuit Current
50A
Max. PV Open Circuit Voltage
150V absolute maximum coldest conditions 145V start-up and operating maximum
Protection Category
IP43 (electronic components), IP22 (connection area)
Efficiency
98%
Bluetooth Enabled
No
Dimensions
H185 x W250 x D95mm
Weight
3Kg
Warranty
5 Years
Country of Manufacture
India
...Read more
View Product
£10.80
Berker Single Rocker Switch Colour Anthracite W4 21231A
Berker Single Rocker Switch Colour Anthracite W4 21231A
Used as the main light switch in many caravans and Motorhome these Berker light switches are great if you need to replace a broken one or are adding a new light to your van.
Can be used for 12V & 240V .Rating 16A, 250V
Colour Anthracite
This is a 1 way switch.
Dont forget to order the frame / outer cover in the colour of your choice.
...Read more
View Product
Out of Stock
£44.99
Blue Sea 5035 6 Circuit ST Blade Fuse Block BS5035
ST Blade Fuse Block – 6 Independent Circuits with Cover BS5035 Blue Sea 5035
Corrosion resistant, tin-plated copper fuse clips reduce heat and improve the efficiency of the electrical system
Clear insulating cover with label recesses accepts Small Format Labels
Spare fuse holder in cover
Accepts ring or snap fork type terminals
Includes two terminal block jumpers
...Read more
Best Seller
£501.48
Victron Energy SmartSolar MPPT 150/45-MC4 – SCC115045212
Victron Energy SmartSolar MPPT 150/45-MC4 – SCC115045310
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
Models:12/24/36/48 Volt
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve.
Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.PV short circuit and PV reverse polarity protection.PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Weight
3 kg
Dimensions
250 × 95 × 215 mm
Brand
Victron Energy
Charge Controller Type
MPPT
Max PV Voltage
150V
Output Voltage
12V, 24V, 36V, 48V
Amps Range
40 – 49
Bluetooth
Yes
Input Connection Type
MC4 Connectors
IP Rating
IP43
Warranty - 5 Years
...Read more
View Product
£72.45
Sterling ProSave A 16A CE Zinc Saver
By installing a Galvanic Isolator / Zinc Saver it maintains a good earth link with the shore but prevents any stray currents travelling up the earth line and damaging the boat. The Galvanic Isolator has the following extra features: Total Protection: Recent upgrades in the new A.B.Y.C. have removed the need for a monitoring system on the zinc saver as long as if the unit was to fail, the internal devices must fail in such a way as to continue to ensure the safe connection of the earth circuit. The new Pro Safe FS s now fully certified as a fail safe device and as such no longer needs any monitoring system. This ensures a simpler and lower installation cost for this new product. Suitable for use in Europe and the rest of the world except the U.S.A if A,B,Y,C compliance is required. Rated at 30A continous Complies to CE EN 13297 16 Amps 120 x 100 x 90mm Weight: 1.0kg ? This product is by far the most commonly used device in Europe. For cable information for all Sterling Products click here
...Read more
View Product
£193.86
Sterling Pro Split R 12V 120A 3 Out Split Isolator
The ProSplit R is an advanced split charge management device, developed specifically to deal with the complex nature of modern multi battery systems in boats and vehicles. For single or dual alternator inputs to two, three or four battery bank installations. Complex software with some 1000 lines of code analyses every perceivable condition to ensure charging priorities are managed as you want with specific focus on preserving charge in the engine starter battery. Each input & output terminal is independently monitored to establish status before deciding where charge will be delivered and to prevent discharge from one battery to another. Truly zero voltage drop is one key feature of the Pro Split R. Many alternative products claim to have no voltage loss but, under test, are proven not to be so - especially with heavy loads - when it really matters. It may not seem significant but 1V drop equates to as much as 30% lost charging power in a 12V system. ? Unlike conventional Voltage Sensitive Relays (VSRs), the ProSplit R has the ability to identify and reverse current or over-voltage conditions and disconnect individual batteries to avoid damage or discharge. The ignition sense connection also ensures that the device knows the engine is running and protects the start battery when the engine is off. ? Specification: Alt Volts: 12 Max Alt Amps: 120 Output Battery Bank: 3 out Unit Size (mm): 150 x 80 x 130 Unit Weight (kg): 0.9 For cable information for all Sterling Products click here
...Read more
View Product
£94.99
Sterling PCUR Remote Control for Pro Charge U Battery Chargers
Remote Control for the Pro Charge Ultra With the optional remote control many features can be operated from a distance and all important information can be read. The remote control can be used both as an installation or attached as a mounted unit. Information from the remote control Charging voltage (V) and charge current (A) Charging stage and duration Configured Battery Type Temperature of the charger Temperature of the battery Error Messages
Sterling PCUR Remote Control for Pro Charge U Battery Chargers
Size: 110 x 68 x 20 mmIncludes 10 metres of cableUnique housing for remoteCan be surface mounted, recess mounted or flush mounted
EAN no: 05060068292682
...Read more
View Product
£101.99
Sterling 30 amp Zinc Saver EU
By installing a Galvanic Isolator / Zinc Saver it maintains a good earth link with the shore but prevents any stray currents travelling up the earth line and damaging the boat. The Galvanic Isolator has the following extra features: Total Protection: Recent upgrades in the new A.B.Y.C. have removed the need for a monitoring system on the zinc saver as long as if the unit was to fail, the internal devices must fail in such a way as to continue to ensure the safe connection of the earth circuit. The new Pro Safe FS s now fully certified as a fail safe device and as such no longer needs any monitoring system. This ensures a simpler and lower installation cost for this new product. Suitable for use in Europe and the rest of the world except the U.S.A if A,B,Y,C compliance is required 220 x 120 x 100mm 1.5kg 30A Protects your boat against galvanic corrosion by the shore power cable Rated at 30A continous Complies to CE EN 13297 For cable information for all Sterling products click here
...Read more
View Product
£121.00
Sterling 12V Waterproof Advanced Regulators
Pro Reg BW waterproof advanced alternator regulator This product is recommended for alternators lower than 150A rating, for larger refer to the Pro reg D (PDAR)
Voltage DC Size L x W x D mm Weight Kg
12 120 x 80 x 45 0.4
Includes battery temperature sensor and 1m cables. Unit actual rating (the actual device rating): Positive field control 8A maximum field current, Negative field control 13A maximum field. Real world rating (rule of thumb): 12V alternator with standard regulator fitted, up to approx 350A alternator, more if negative field control. 12V alternator with no standard regulator, stand alone, about 150A more if a negative field control. Pro Reg BW Features explained: Digital software control with slow start: Digital control (software) uses lines of computer code, digitally burned into a memory processor in the Advanced Regulator. This means that very complex information and mathematical algorithms can be processed that would not be possible with an analogue hardware system. The unit ramps up the current over a short period of time to reduce the chance of alternator belt slip. Can be used in parallel or a stand alone reg: This unit can be used as a stand-alone regulator as well as in parallel with the original regulator. Sterling believes that, where possible, to leave the existing regulator in place this offers the Sterling Reg a fall back safety position in the event of it failing. Single unit fits 99% of alternators: The reason for this is very simple, if you check other makes, you can find 12-15 different models to cover what the Sterling will do with 1. The problem with this is the public must supply correct information about their alternator and batteries to ensure they receive the correct Advanced Regulator. Self diagnosing fault findings: The performance and benefits of an Advanced Regulator are beyond dispute, however, an Advanced Regulator which has been incorrectly installed or fails, can have devastating effects on a boat. It will destroy the batteries and could easily set fire to cables. Sterling takes all this into account and recognizes that some boats on which these regulators are used have poor wiring and other faults. Because of this we scan the system every two seconds and if all the parameters are not within our pre-set values then the unit will switch ?off? and signal a fault. This, in my opinion, is the most important aspect of this type of device, a point not shared by our competitors. Information 8 LED display: Most Advanced Regulators have no real information being transmitted to the operator and as a result one has no idea what is going on. Depending on the model we give the operator as much information as possible as to what is happening with the product and the installation system in general. High battery temperature trip: Most Advanced Regulators monitor the battery temperature to perform the task as explained above, but what is the point of monitoring the temperature if in the event of a battery going over temperature you do nothing about it? Sterling software will pick up the high temperature and in the worst case of a battery exceeding 50 deg C, will switch ?off? the regulator and display a warning. High alternator voltage trip: This is the most common trip used. In the event of poor wiring, incorrect installation, or any fault in the system, the alternator voltage will rise too high; the unit will trip out and display a warning. In event of failure auto return to standard regulator: There are many good reasons to leave the standard regulator in place, one of them being that, in the event of a Sterling failure or any trip condition of the advanced regulator, your standard regulator will automatically take over and allow the journey to continue but at a lower charge rate. If your Advanced Regulators does not offer this feature then you will lose the use of the boat during any failure. Protects batteries if temperature sensor open circuited: A big problem with temperature sensors (why people don't like fitting them) is that they are on a battery. If someone changes the batteries and breaks or open circuits the temperature sensor wire, most Advanced Regulators will destroy your batteries by over charging them. Not so with a Sterling. In the event of a failure of a cable break the Sterling software will pick it up within 2 seconds and return to the default settings and carry on safely. It will also protect batteries if split charge relay / diode fails open circuit. A common fault when fitting an Advanced Regulator is the old split charge diode or relay that is not up to handling the new performance, resulting in a regulator to fail. This will result in the destruction of the other battery bank, as the battery sense wire will be isolated from the alternator (but not with a Sterling, again our software jumps in and saves the day). Dynamic progressive battery charging: This is a term used to explain that the internal software calculates a different charging regime every time it is used as the battery state etc. is never the same. Older systems simply used fixed trimmers which were not able to distinguish different battery types or sizes. Programmable for different battery types: Most other manufacturers fail to recognize the fact that the world has more than one type of battery. There are now four main groups, open lead acid/traction, sealed /gel, gel (Europe) and AGM To optimise charging for each of these battery types there are four totally different charging curves, temperature curves and safety criteria with each battery type. Charges to 4 step constant current progressive charging curves: All good battery chargers are constant current with 3 - 4 step charging curves. This method is recognized as the best charging type so why expect anything less from your alternator- in most cases the primary battery charging source. The Sterling Advanced Regulator converts your basic constant voltage alternator into a modern 4 step constant current battery charger, it?s that simple. Totally isolates the regulator in a fault condition: This is very important and not fully understood by the public. All regulators can fail for different reasons. If an Advanced Regulator fails closed then the alternator will work at full power and destroy everything around itself. Simply turning the regulator ?off? will have no effect, so in the event of a Sterling system failing or tripping, for whatever reason, we physically break the field wire guaranteeing that the Advanced Regulator will stop working. Battery temperature sensing: One battery temperature sensor is supplied with the unit. This will adjust the output charging curves with the ambient battery temperature. High battery voltage trip: In the event of the battery voltage going too high the unit will switch the regulator ?off? and display a warning. De-sulphation ability on open lead acid batteries: In order to prevent and even de-sulphate lead acid batteries a regular charge cycle exceeding 14.4V ( x 2 for 24V ) will remove the sulphate from a battery bank and so prolong its life expectancy. Can be used with or without temperature sensing: Some people don't want to fit temperature sensors, the choice is yours, the software will pick up if you use it or not and control accordingly. Most other makes insist a temperature sensor be fitted. Protects batteries if advanced regulator fails: In the unlikely event of the Advanced Regulator failing then most regulators will fail closed and destroy all your batteries (would it surprise you to know that the Sterling software will jump in and save the day again?). Pro Reg BW alternator max sizes: up to 350A with standard reg / 150A stand alone. IP67 waterproof and ignition protected.
...Read more
View Product
£59.99
Stering 12v 150w Inverter
All Sterling inverters are continuously rated, with all the usual overload, over voltage and low voltage cut outs, all the inverters come with cable and 24 kt gold connectors, in order to prevent battery terminal corrosion. Available in 230V for UK and Europe and also 110V for building sites / off vehicle use or for equipment supplied on boats made in the USA (not suitable for washing machine / some bread makers). Overload, overheat, short circuit protected Standby-current: Efficiency: 85%-95% No fans Size: 100mm oval 145L Weight: 0.3kg Power (continuous) Watts: 150 Voltage DC: 12 Socket Type: Universal
...Read more
View Product
Out of Stock
£5.29
Blue Sea 9218 BS9218 Jumper Terminal 2400 Series
Terminal Block Jumper for 20A Terminal Blocks BS9218 Blue Sea 9218
Jumpers allow creation of common circuits on independent connectors
Fits 20 Ampere terminal blocks (2400 Series)
5 in Retail Pack
...Read more
Out of Stock
£4.24
Blue Sea 9217 BS9217 Jumper Terminal 2500 Series
Terminal Block Jumper for 30A Terminal Blocks BS9217 Blue Sea 9217
Jumpers allow creation of common circuits on independent connectors
Fits 30 Ampere terminal blocks (2500 Series)
5 in Retail Pack
...Read more
Out of Stock
£211.81
Blue Sea 7700 BS7700 Solenoid ML 500A 12V RBS With Manual Control (incl 2145-BSS Switch)
ML-RBS Remote Battery Switch with Manual Control - 12V DC 500A
BS7700 Blue Sea 7700
500 Amp magnetic latching switch provides high amperage switching under load, manually or from remote locations
Manual override knob provides an added level of safety allowing control with or without power and offering LOCKED OFF capability for servicing
LED output to remotely indicate switch state - requires optional LED
3? 8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
7? 8" (22 mm) stud length accepts multiple cable terminals
Label recesses for circuit identification
Silver alloy contacts provide high reliability for switching live loads
...Read more
Out of Stock
£244.85
Blue Sea 7623 BS7623 Solenoid ML 500A 24V ACR With Manual Control (incl 2146-BSS Switch)
ML-ACR Automatic Charging Relay with Manual Control - 24V DC 500A BS7623 Blue Sea 7623
500 Amp magnetic latching (bi-stable) relay automatically combines batteries during charging and isolates batteries when discharging and when starting engine
Manual control switch provides an added level of safety allowing control with or without power, and offering LOCK OFF capability for servicing
Includes ML-Series Remote Control Contura Switch PN 2146
Automatically manages the charging of two large battery banks
Allows paralleling of battery banks for emergency starting
500 Ampere continuous rating to support high-output alternators
Magnetic Latch (ML)—ACR draws very low current (<40mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws moderate current for very short time when changing state
Dual sensing—senses charge on both battery banks
Start Isolation (SI)—can be configured for temporary isolation of House loads from Engine circuit during engine cranking to protect sensitive electronics
Engine Isolation (EI)—can be configured for isolation of two engines while both are running to protect engine electronics and maximize alternator output
Senses charging on two battery banks
LED output to remotely indicate when batteries are combined, isolated, in voltage lockout, or in Start or Engine isolation
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
7/8" (22mm) stud length accepts multiple cable terminals
Silver alloy contacts provide high reliability for switching live loads
Label recesses for circuit identification
...Read more
Out of Stock
£257.74
Blue Sea 7622 BS7622 Solenoid ML 500A 12V ACR With Manual Control (incl 2146-BSS Switch)
ML-ACR Automatic Charging Relay with Manual Control - 12V DC 500A BS7622 Blue Sea 7622
500 Amp magnetic latching (bi-stable) relay automatically combines batteries during charging and isolates batteries when discharging and when starting engine
Manual control switch provides an added level of safety allowing control with or without power, and offering LOCK OFF capability for servicing
Includes ML-Series Remote Control Contura Switch PN 2146
Automatically manages the charging of two large battery banks
Allows paralleling of battery banks for emergency starting
500 Ampere continuous rating to support high-output alternators
Magnetic Latch (ML)—ACR draws very low current (<40mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws moderate current for very short time when changing state
Dual sensing—senses charge on both battery banks
Start Isolation (SI)—can be configured for temporary isolation of House loads from Engine circuit during engine cranking to protect sensitive electronics
Engine Isolation (EI)—can be configured for isolation of two engines while both are running to protect engine electronics and maximize alternator output
Senses charging on two battery banks
LED output to remotely indicate when batteries are combined, isolated, in voltage lockout, or in Start or Engine isolation
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
7/8" (22mm) stud length accepts multiple cable terminals
Silver alloy contacts provide high reliability for switching live loads
Label recesses for circuit identification
...Read more
Out of Stock
£5.22
Blue Sea 7053 BS7053 Circuit Breaker Push Button QC 7A
Push Button Reset Only Quick Connect Circuit Breaker - 7 Amps BS7053 Blue Sea 7053
Branch circuit breakers (can also be used for 24-hour circuit protection)
Quick connect terminal style circuit breakers are incorporated into Blue Sea Systems WeatherDeck Waterproof Circuit Breaker Panels, Dual Battery Bank Main Distribution Panels, and 360 Distribution Panels
Compact design enables high density circuit protection configurations
Push-to-reset operation
“Trip Free” design cannot be held “ON” during fault current condition
Ignition protected - Safe for installation aboard gasoline powered boats
Optional Push Button Waterproof Boot protects circuit breaker in wet environments, replaces dress nut mounting on circuit breakers and resists discoloration and cracking
...Read more
Out of Stock
£5.22
Blue Sea 7050 BS7050 Circuit Breaker Push Button QC 3A
Push Button Reset Only Quick Connect Circuit Breaker - 3 Amps BS7050 Blue Sea 7050
Branch circuit breakers (can also be used for 24-hour circuit protection)
Quick connect terminal style circuit breakers are incorporated into Blue Sea Systems WeatherDeck Waterproof Circuit Breaker Panels, Dual Battery Bank Main Distribution Panels, and 360 Distribution Panels
Compact design enables high density circuit protection configurations
Push-to-reset operation
“Trip Free” design cannot be held “ON” during fault current condition
Ignition protected - Safe for installation aboard gasoline powered boats
Optional Push Button Waterproof Boot protects circuit breaker in wet environments, replaces dress nut mounting on circuit breakers and resists discoloration and cracking
...Read more
Out of Stock
£29.99
Blue Sea 5290 BS5290 Fuse ATC easyID 31pcs
easyID Fuse Kit BS5290 Blue Sea 5290
ATC® fuses illuminate when blown easyID™ illuminated ATC® blade fuses use Light Emitting Diode (LED) technology to show that a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards.
Replaces non illuminating ATO® or ATC® fuses
Fast acting
...Read more
Out of Stock
£7.10
Blue Sea 5258 BS5258 Fuse MIDI 150A - Pack of 2 Fuses
Blue Sea 5258 AMI / MIDI Fuse - 150 Amp BS5258
Fast-acting type fuses ideal for electronic devices
Standard circuit protection device for automobiles and trucks
Tin-plated connector blades for corrosion resistance
Visible indication of blown condition
Sold in packages of 2
...Read more
Out of Stock
£6.99
Blue Sea 5252 BS5252 Fuse MIDI 50A
AMI / MIDI Fuse - 50 Amp BS5252 Blue Sea 5252
Fast-acting type fuses ideal for electronic devices
Standard circuit protection device for automobiles and trucks
Tin-plated connector blades for corrosion resistance
Visible indication of blown condition
Sold in packages of 2
...Read more
Out of Stock
£32.94
Blue Sea 5163 BS5163 Fuse ANL 750A
ANL Fuse - 750 Amp BS5163 Blue Sea 5163
Silver-plated connector blades for corrosion resistance
Visible indication of blown condition
6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks
For use with Blue Sea Systems' ANL Fuse Blocks
...Read more
Out of Stock
£21.46
Blue Sea 5125 BS5125 Fuse ANL 100A
ANL Fuse - 100 Amp BS5125 Blue Sea 5125
Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only)
Silver-plated connector blades for corrosion resistance
Visible indication of blown condition
6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks
For use with Blue Sea Systems' ANL Fuse Blocks
...Read more
Out of Stock
£99.07
Blue Sea 5054 BS5054 Circuit Breaker Block ST CLB 12 Circuits with Grounding
ST CLB Circuit Breaker Block - 12 Position with Negative Bus BS5054 Blue Sea 5054
The advantage of a resettable circuit breaker over a fuse is well known however people find circuit breakers more expensive and difficult to install. The ST CLB Circuit Breaker Block solves this issue by using the compact, snap-in-place CLB resettable circuit breaker which makes breakers as easy to install as a fuse. Features
Quick connect clips allow circuit breakers to snap easily into place
Tin-plated copper busses and screw terminals
Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements
Easy to open clip on cover
Breakouts allow wire access in two directions
Accepts ring terminals
Optional push button waterproof boots or dress nuts can be installed over cover
Accepts square labels
...Read more
Out of Stock
£24.32
Blue Sea 5023 BS5023 Fuse Block ST Blade 4 Circuits Bat Terminal
ST Blade Battery Terminal Mount Fuse Block BS5023 Blue Sea 5023
Easy to install 4 ATO®/ATC® fused circuits
Mounts on the battery terminal stud
Screw terminals for securing wires
Four Nylon insulated ring terminals included
Insulating cover included
Accepts Small Format Circuit Labels
Includes 1 fuse
...Read more
Out of Stock
£3.94
Blue Sea 4013 BS4013 Cable Cap 1x.500 Stud Black
CableCap - Black 0.50 Stud BS4013 Blue Sea 4013
Insulates single stud on alternators, starters, windlasses and high amperage termination points
Insulate stud type connectors on alternators, starters, windlasses and other high amperage devices
...Read more
£3.74
Blue Sea 4012 BS4012 Cable Cap 1x.500 Stud Red
CableCap - Red 0.50 Stud BS4012 Blue Sea 4012
Insulates single stud on alternators, starters, windlasses and high amperage termination points
Insulate stud type connectors on alternators, starters, windlasses and other high amperage devices
...Read more
View Product
Out of Stock
£33.36
Blue Sea BS2718 Cover MaxiBus 2105/2126
MaxiBus Insulating Cover for PN 2105 and 2126 Blue Sea 2718 BS2718
Insulating cover with breakouts for superior electrical insulation
Insulating cover meets ABYC insulations requirements
...Read more
£12.89
Blue Sea 2510 BS2510 Terminal Block/Independent 10 Circuits 30A
Terminal Block 30A - 10 Circuit BS2510 Blue Sea 2510
Closed back design completely insulates power from the mounting surface
Each screw pair is one isolated circuit
Jumpers allow creation of common circuits
...Read more
View Product
Out of Stock
£5.22
Blue Sea 2504 BS2504 Terminal Block/Independent 4 Circuits 30A
Terminal Block 30A - 4 Circuit BS2504 Blue Sea 2504
Closed back design completely insulates power from the mounting surface
Each screw pair is one isolated circuit
Jumpers allow the creation of common circuits
...Read more
£4.75
Blue Sea 2406 BS2406 Terminal Block/Ind 6circ 20A
Blue Sea 2406 Terminal Block 20A - 6 Circuit BS2406
Closed back design completely insulates power from the mounting surface
Each screw pair is one isolated circuit
Jumpers allow creation of common circuits
...Read more
View Product
Out of Stock
£14.77
Blue Sea 2314 BS2314 MiniBus 5x 8-32 CommonBus with Cover
Blue Sea 2314 BS2314 MiniBus 5x 8-32 CommonBus with Cover
Common 100A Mini BusBar - 5 Gang with Cover Great for limited space applications
...Read more
Out of Stock
£22.72
Blue Sea 2203 BS2203 TermSm FeedThrough 3/8-16 Stud Black
Terminal Feed Through Connector - 3/8"-16 Studs (Black) BS2203 Blue Sea 2203
Eliminates charge and provides strain relief when passing high current through hulls, decks and bulkheads
Perfect for passing high current cables through hulls, decks and bulkheads
Large cables passed through holes are subject to chafing even when protective grommeting is used. Terminal Feed Through Connectors eliminate chafing and provide excellent strain relief for the cable
Large size terminals have a mounting face that can be gasketed or bedded to provide a water tight installation
Rated IP66 — withstands water from heavy seas
...Read more
Out of Stock
£12.90
Blue Sea 2003 BS2003 PowerPost 3/8in
Blue Sea PowerPost - 3/8"-16 Stud 2003 BS2003
Insulated single stainless steel stud terminates multiple large conductors
Connects high amperage cables securely
Stud dimensions: 3/8" x 7/8"
Base Material is PBT UL94 V0
...Read more
£52.49
Blue Sea 1733 BS1733 Meter Mini OLED DC Voltage
Mini OLED DC Voltmeter - Yellow BS1733 Blue Sea 1733
Monitors DC voltage on a bright, waterproof, daylight readable OLED screen
Reverse polarity protected
Mounts in a common 1-1/8" (29mm) hole
...Read more
View Product
Out of Stock
£3.54
Blue Sea 5293 Fuse ATC easyID 7.5A
ATC® fuses illuminate when blown easyID™ illuminated ATC® blade fuses useLight Emitting Diode (LED) technology toshow that a fuse has blown, making themeasy to spot in fuse panels tucked up underdark dashboards. Replaces non illuminating ATO® or ATC® fuses. Fast acting. Two per retail package
...Read more
Out of Stock
£3.54
Blue Sea 5292 Fuse ATC easyID 5A
ATC® fuses illuminate when blown easyID™ illuminated ATC® blade fuses useLight Emitting Diode (LED) technology toshow that a fuse has blown, making themeasy to spot in fuse panels tucked up underdark dashboards. Replaces non illuminating ATO® or ATC® fuses. Fast acting. Two per retail package
...Read more
Out of Stock
£3.54
Blue Sea 5291 Fuse ATC easyID 3A
ATC® fuses illuminate when blown easyID™ illuminated ATC® blade fuses useLight Emitting Diode (LED) technology toshow that a fuse has blown, making themeasy to spot in fuse panels tucked up underdark dashboards. Replaces non illuminating ATO® or ATC® fuses. Fast acting. Two per retail package
...Read more
Out of Stock
£16.82
Blue Sea 5289 Fuse Kit AGC 41pcs
Includes 40 AGC fuses and a Heavy Duty In-Line Fuse Holder.
...Read more
Out of Stock
£1.97
Blue Sea 5285 Fuse GMA 10A
Compact size. Visible indication of blown condition. Commonly used for 12/24V DC circuit protection associated with electronics. Three per retail package
...Read more
Out of Stock
£1.97
Blue Sea 5284 Fuse GMA 7A
Compact size. Visible indication of blown condition. Commonly used for 12/24V DC circuit protection associated with electronics. Three per retail package
...Read more
Out of Stock
£1.97
Blue Sea 5283 Fuse GMA 5A
Compact size. Visible indication of blown condition. Commonly used for 12/24V DC circuit protection associated with electronics. Three per retail package
...Read more
Out of Stock
£1.97
Blue Sea 5282 Fuse GMA 3A
Compact size. Visible indication of blown condition. Commonly used for 12/24V DC circuit protection associated with electronics. Three per retail package
...Read more
Out of Stock
£1.97
Blue Sea 5281 Fuse GMA 2A
Compact size. Visible indication of blown condition. Commonly used for 12/24V DC circuit protection associated with electronics. Three per retail package
...Read more
Out of Stock
£1.97
Blue Sea 5280 Fuse GMA 1A
Compact size. Visible indication of blown condition. Commonly used for 12/24V DC circuit protection associated with electronics. Three per retail package
...Read more
Out of Stock
£2.64
Blue Sea 5275 Fuse AGA 20A
Compact size. Visible indication of blown condition. Commonly used for 12/24V DC circuit protection associated with electronics. Five per retail package
...Read more
Out of Stock
£1.97
Blue Sea 5274 Fuse ATM 30A
Color-coded for easy amperage identification. Two per retail package
...Read more
Out of Stock
£1.97
Blue Sea 5273 Fuse ATM 20A
Color-coded for easy amperage identification. Two per retail package
...Read more
Out of Stock
£1.97
Blue Sea 5272 Fuse ATM 15A
Color-coded for easy amperage identification. Two per retail package
...Read more
Out of Stock
£1.97
Blue Sea 5271 Fuse ATM 10A
Color-coded for easy amperage identification. Two per retail package
...Read more
Out of Stock
£1.97
Blue Sea 5270 Fuse ATM 5A
Color-coded for easy amperage identification. Two per retail package
...Read more
Out of Stock
£6.99
Blue Sea 5260 Fuse MIDI 200A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Sold in packages of 2
...Read more
Out of Stock
£6.99
Blue Sea 5259 Fuse MIDI 175A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Sold in packages of 2
...Read more
Out of Stock
£6.59
Blue Sea 5257 Fuse MIDI 125A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Sold in packages of 2
...Read more
Out of Stock
£6.99
Blue Sea 5255 Fuse MIDI 80A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Sold in packages of 2
...Read more
Out of Stock
£6.99
Blue Sea 5254 Fuse MIDI 70A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Sold in packages of 2
...Read more
Out of Stock
£6.59
Blue Sea 5253 Fuse MIDI 60A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Sold in packages of 2
...Read more
Out of Stock
£6.99
Blue Sea 5250 Fuse MIDI 30A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Sold in packages of 2
...Read more
Out of Stock
£1.97
Blue Sea 5246 Fuse ATO/ATC 40A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Sold in packages of 2
...Read more
Out of Stock
£1.97
Blue Sea 5245 Fuse ATO/ATC 30A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Sold in packages of 2
...Read more
Out of Stock
£1.97
Blue Sea 5244 Fuse ATO/ATC 25A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Sold in packages of 2
...Read more
Out of Stock
£1.97
Blue Sea 5243 Fuse ATO/ATC 20A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Sold in packages of 2
...Read more
Out of Stock
£1.97
Blue Sea 5242 Fuse ATO/ATC 15A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Sold in packages of 2
...Read more
Out of Stock
£1.97
Blue Sea 5241 Fuse ATO/ATC 10A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Sold in packages of 2
...Read more
Out of Stock
£1.97
Blue Sea 5240 Fuse ATO/ATC 7.5A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Sold in packages of 2
...Read more
Out of Stock
£1.97
Blue Sea 5239 Fuse ATO/ATC 5A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Sold in packages of 2
...Read more
Out of Stock
£2.22
Blue Sea 5238 Fuse ATO/ATC 4A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Sold in packages of 2
...Read more
Out of Stock
£1.97
Blue Sea 5237 Fuse ATO/ATC 3A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Sold in packages of 2
...Read more
Out of Stock
£1.97
Blue Sea 5236 Fuse ATO/ATC 2A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Sold in packages of 2
...Read more
Out of Stock
£1.97
Blue Sea 5235 Fuse ATO/ATC 1A
Fast-acting type fuses ideal for electronic devices. Standard circuit protection device for automobiles and trucks. Tin-plated connector blades for corrosion resistance. Sold in packages of 2
...Read more
Out of Stock
£3.04
Blue Sea 5234 Fuse MDL 30A Time Delay
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. MDL? fuses to 7.5A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. MDL? Two per retail package
...Read more
Out of Stock
£3.04
Blue Sea 5233 Fuse MDL 25A Time Delay
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. MDL? fuses to 7.5A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. MDL? Two per retail package
...Read more
Out of Stock
£3.04
Blue Sea 5232 Fuse MDL 20A Time Delay
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. MDL? fuses to 7.5A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. MDL? Two per retail package
...Read more
Out of Stock
£3.04
Blue Sea 5231 Fuse MDL 15A Time Delay
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. MDL? fuses to 7.5A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. MDL? Two per retail package
...Read more
Out of Stock
£3.04
Blue Sea 5230 Fuse MDL 10A Time Delay
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. MDL? fuses to 7.5A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. MDL? Two per retail package
...Read more
Out of Stock
£1.97
Blue Sea 5229 Fuse MDL 7.5A Time Delay
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. MDL? fuses to 7.5A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. MDL? Two per retail package
...Read more
Out of Stock
£1.97
Blue Sea 5228 Fuse MDL 6.25A Time Delay
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. MDL? fuses to 7.5A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. MDL? Two per retail package
...Read more
Out of Stock
£1.97
Blue Sea 5227 Fuse MDL 5A Time Delay
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. MDL? fuses to 7.5A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. MDL? Two per retail package
...Read more
Out of Stock
£1.97
Blue Sea 5226 Fuse MDL 3A Time Delay
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. MDL? fuses to 7.5A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. MDL? Two per retail package
...Read more
Out of Stock
£2.16
Blue Sea 5220 Fuse AGC 30A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£2.16
Blue Sea 5219 Fuse AGC 25A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£2.16
Blue Sea 5218 Fuse AGC 20A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£2.16
Blue Sea 5217 Fuse AGC 15A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£2.16
Blue Sea 5215 Fuse AGC 10A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£2.16
Blue Sea 5213 Fuse AGC 7.50A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£2.16
Blue Sea 5212 Fuse AGC 7A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£2.16
Blue Sea 5211 Fuse AGC 6A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£2.16
Blue Sea 5210 Fuse AGC 5A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£2.16
Blue Sea 5209 Fuse AGC 4A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£2.16
Blue Sea 5208 Fuse AGC 3A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£2.16
Blue Sea 5207 Fuse AGC 2.50A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£2.16
Blue Sea 5206 Fuse AGC 2A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£2.16
Blue Sea 5205 Fuse AGC 1.50A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£2.16
Blue Sea 5204 Fuse AGC 1A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£2.16
Blue Sea 5202 Fuse AGC 0.50A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£2.14
Blue Sea 5201 Fuse AGC 0.25A
For use with Blue Sea Systems' ST Glass Fuse Blocks and AGC? or MDL? fuse holders. AGC? and MDL? fuses are typically used in DC systems up to 32V DC. AGC? fuses to 10A are rated for use in AC at 125V AC and to a maximum 250V AC. Visible indication of blown condition. AGC? Five per retail package
...Read more
Out of Stock
£53.33
Blue Sea 5196 Fuse Block MRBF 3Circ Common
Accommodates three MRBF fuses for consolidated high amperage circuit protection Safely provides power to three loads from a single source Clip-on insulating cover satisfies ABYC/USCG insulation requirements Versatile wiring options allow all wires to come out a single side Label recesses accommodate Blue Sea Systems square format labels for easy circuit identification One-piece stainless flange nuts ensure safe, secure connections Fuses sold separately
...Read more
Out of Stock
£15.55
Blue Sea 5186 Fuse Terminal 175A
Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151?do not mount the fuse directly to the battery terminal. Interrupt rating satisfies ABYC requirements for DC Main circuit protection on large battery banks. Ignition protected?safe for installation aboard gasoline powered boats. Clear window?visual indication of blown condition. Color coded for each amperage
...Read more
Out of Stock
£15.55
Blue Sea 5182 Fuse Terminal 90A
Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151?do not mount the fuse directly to the battery terminal. Interrupt rating satisfies ABYC requirements for DC Main circuit protection on large battery banks. Ignition protected?safe for installation aboard gasoline powered boats. Clear window?visual indication of blown condition. Color coded for each amperage
...Read more
Out of Stock
£16.43
Blue Sea 5181 Fuse Terminal 80A
Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151?do not mount the fuse directly to the battery terminal. Interrupt rating satisfies ABYC requirements for DC Main circuit protection on large battery banks. Ignition protected?safe for installation aboard gasoline powered boats. Clear window?visual indication of blown condition. Color coded for each amperage
...Read more
Out of Stock
£16.43
Blue Sea 5177 Fuse Terminal 50A
Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151?do not mount the fuse directly to the battery terminal. Interrupt rating satisfies ABYC requirements for DC Main circuit protection on large battery banks. Ignition protected?safe for installation aboard gasoline powered boats. Clear window?visual indication of blown condition. Color coded for each amperage
...Read more
Out of Stock
£16.43
Blue Sea 5176 Fuse Terminal 40A
Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151?do not mount the fuse directly to the battery terminal. Interrupt rating satisfies ABYC requirements for DC Main circuit protection on large battery banks. Ignition protected?safe for installation aboard gasoline powered boats. Clear window?visual indication of blown condition. Color coded for each amperage
...Read more
Out of Stock
£15.55
Blue Sea 5175 Fuse Terminal 30A
Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151?do not mount the fuse directly to the battery terminal. Interrupt rating satisfies ABYC requirements for DC Main circuit protection on large battery banks. Ignition protected?safe for installation aboard gasoline powered boats. Clear window?visual indication of blown condition. Color coded for each amperage
...Read more
Out of Stock
£17.81
Blue Sea 5165 Fuse ANL 40A
Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only). Silver-plated connector blades for corrosion resistance. Visible indication of blown condition. 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks. For use with Blue Sea Systems' ANL Fuse Blocks
...Read more
Out of Stock
£18.80
Blue Sea 5164 Fuse ANL 35A
Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only). Silver-plated connector blades for corrosion resistance. Visible indication of blown condition. 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks. For use with Blue Sea Systems' ANL Fuse Blocks
...Read more
Out of Stock
£32.94
Blue Sea 5161 Fuse ANL 600A
Silver-plated connector blades for corrosion resistance. Visible indication of blown condition. 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks. For use with Blue Sea Systems' ANL Fuse Blocks
...Read more
Out of Stock
£5.70
Blue Sea 5143 Fuse MAXI 80A
Economical. Tin-plated connector blades for corrosion resistance. Visible indication of blown condition
...Read more
Out of Stock
£5.70
Blue Sea 5142 Fuse MAXI 70A
Economical. Tin-plated connector blades for corrosion resistance. Visible indication of blown condition
...Read more
Out of Stock
£3.04
Blue Sea 5141 Fuse MAXI 60A
Economical. Tin-plated connector blades for corrosion resistance. Visible indication of blown condition
...Read more
Out of Stock
£3.04
Blue Sea 5140 Fuse MAXI 50A
Economical. Tin-plated connector blades for corrosion resistance. Visible indication of blown condition
...Read more
Out of Stock
£3.04
Blue Sea 5139 Fuse MAXI 40A
Economical. Tin-plated connector blades for corrosion resistance. Visible indication of blown condition
...Read more
Out of Stock
£3.04
Blue Sea 5138 Fuse MAXI 30A
Economical. Tin-plated connector blades for corrosion resistance. Visible indication of blown condition
...Read more
Out of Stock
£26.16
Blue Sea 5137 Fuse ANL 500A
Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only). Silver-plated connector blades for corrosion resistance. Visible indication of blown condition. 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks. For use with Blue Sea Systems' ANL Fuse Blocks
...Read more
Out of Stock
£26.16
Blue Sea 5136 Fuse ANL 400A
Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only). Silver-plated connector blades for corrosion resistance. Visible indication of blown condition. 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks. For use with Blue Sea Systems' ANL Fuse Blocks
...Read more
Out of Stock
£26.16
Blue Sea 5135 Fuse ANL 350A
Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only). Silver-plated connector blades for corrosion resistance. Visible indication of blown condition. 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks. For use with Blue Sea Systems' ANL Fuse Blocks
...Read more
Out of Stock
£26.16
Blue Sea 5131 Fuse ANL 250A
Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only). Silver-plated connector blades for corrosion resistance. Visible indication of blown condition. 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks. For use with Blue Sea Systems' ANL Fuse Blocks
...Read more
Out of Stock
£21.46
Blue Sea 5129 Fuse ANL 200A
Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only). Silver-plated connector blades for corrosion resistance. Visible indication of blown condition. 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks. For use with Blue Sea Systems' ANL Fuse Blocks
...Read more
Out of Stock
£21.46
Blue Sea 5128 Fuse ANL 175A
Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only). Silver-plated connector blades for corrosion resistance. Visible indication of blown condition. 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks. For use with Blue Sea Systems' ANL Fuse Blocks
...Read more
Out of Stock
£21.46
Blue Sea 5127 Fuse ANL 150A
Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only). Silver-plated connector blades for corrosion resistance. Visible indication of blown condition. 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks. For use with Blue Sea Systems' ANL Fuse Blocks
...Read more
Out of Stock
£17.81
Blue Sea 5126 Fuse ANL 130A
Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only). Silver-plated connector blades for corrosion resistance. Visible indication of blown condition. 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks. For use with Blue Sea Systems' ANL Fuse Blocks
...Read more
Out of Stock
£21.46
Blue Sea 5124 Fuse ANL 80A
Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only). Silver-plated connector blades for corrosion resistance. Visible indication of blown condition. 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks. For use with Blue Sea Systems' ANL Fuse Blocks
...Read more
Out of Stock
£21.46
Blue Sea 5122 Fuse ANL 50A
Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only). Silver-plated connector blades for corrosion resistance. Visible indication of blown condition. 6,000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks. For use with Blue Sea Systems' ANL Fuse Blocks
...Read more
£37.58
Blue Sea 5115 Fuse A3T/Class T 175A
Extremely fast short-circuit response. 20,000 Ampere Interrupt Capacity (AIC)
...Read more
View Product
£37.58
Blue Sea 5113 Fuse A3T/Class T 125A
Extremely fast short-circuit response. 20,000 Ampere Interrupt Capacity (AIC)
...Read more
View Product
Out of Stock
£10.14
Blue Sea 5104 Fuse MEGA 175A/32V
Most economical fuse for 100-300 Ampere circuit protection. For use with Blue Sea Systems' MEGA?/AMG? Fuse Block
...Read more
Out of Stock
£9.54
Blue Sea 5102 Fuse MEGA 125A/32V
Most economical fuse for 100-300 Ampere circuit protection. For use with Blue Sea Systems' MEGA?/AMG? Fuse Block
...Read more
Out of Stock
£10.14
Blue Sea 5101 Fuse MEGA 100A/32V
Most economical fuse for 100-300 Ampere circuit protection. For use with Blue Sea Systems' MEGA?/AMG? Fuse Block
...Read more
Out of Stock
£23.12
Blue Sea 5068 Fuse Holder MAXI Inline
Supplied with 5 inch #6 red lead wire and two adhesive lined sealing shrink wrap tubes Fire wall surface mounting hole permits two or more holders to be mounted together Protective cover with retaining strap Fuse sold separately
...Read more
Out of Stock
£3.74
Blue Sea 5064 Fuse Holder ATO/ATC In Line
For use with ATO or ATC fuses. Supplied with 12 AWG pigtails. 30A Maximum fuse amperage. Fuse sold separately
...Read more
Out of Stock
£6.03
Blue Sea 5063 Fuse Holder AGC/MDL In Line
Accepts 12-18 AWG wire. 30A Maximum fuse amperage. Fuse sold separately
...Read more
Out of Stock
£16.93
Blue Sea 5062 Fuse Holder AGC/MDL Waterproof 20A
Accepts 12-16 AWG wire. 20A Maximum fuse amperage. Fuse sold separately
...Read more
Out of Stock
£5.81
Blue Sea 5061 Fuse Holder AGC/MDL Waterproof 30A
Accepts 12-16 AWG wire. 30A Maximum fuse amperage. Fuse sold separately
...Read more
Out of Stock
£2.96
Blue Sea 5060 Fuse Holder Crimpable 30A
Accepts 12-18 AWG wire. 30A Maximum fuse amperage. Fuse sold separately
...Read more
Out of Stock
£37.28
Blue Sea 5056 ST-Blade Water Resistant Fuse Block
Provides water-resistant circuit protection for ATO/ATC fuses ; circuit breakers in a compact footprint. The single side nesting design allows for wire entry from one side to maximize space. Water-resistant design with standard ring or fork type terminals allows for simple wiring with standard tools Accepts a wide range of wire sizes Includes 3 wire plugs to maintain water resistant rating if less than 4 loads are required Accepts ATO and ATC fast-acting blade fuses Accepts ATO/ATC-Style Low Profile Circuit Breakers Nests with other ST-Blade Water-Resistant Fuse Blocks and Water-Resistant 100A Bus Bars to reduce wire Insulating cover meets ABYC/USCG insulation requirements Tin-plated copper busses and fuse clips Includes four write-on circuit labels Small format standard and custom labels available Spare fuse and fastener storage in cover
...Read more
Out of Stock
£57.86
Blue Sea 5052 Circuit Breaker Block ST CLB 6 Circuits with Grounding
The advantage of a resettable circuit breaker over a fuse is well known however people find circuit breakers more expensive and difficult to install. The ST CLB Circuit Breaker Block solves this issue by using the compact, snap-in-place CLB resettable circuit breaker which makes breakers as easy to install as a fuse. Features Quick connect clips allow circuit breakers to snap easily into place Tin-plated copper busses and screw terminals Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements Easy to open clip on cover Breakouts allow wire access in two directions Accepts ring terminals Optional push button waterproof boots or dress nuts can be installed over cover . Accepts square labels
...Read more
Out of Stock
£74.37
Blue Sea 5051 Circuit Breaker Block ST CLB 12 Independent Circuits
The advantage of a resettable circuit breaker over a fuse is well known however people find circuit breakers more expensive and difficult to install. The ST CLB Circuit Breaker Block solves this issue by using the compact, snap-in-place CLB resettable circuit breaker which makes breakers as easy to install as a fuse. Features Quick connect clips allow circuit breakers to snap easily into place Tin-plated copper busses and screw terminals Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements Easy to open clip on cover Breakouts allow wire access in two directions Accepts ring terminals Optional push button waterproof boots or dress nuts can be installed over cover . Accepts square labels
...Read more
Out of Stock
£45.46
Blue Sea 5050 Circuit Breaker Block ST CLB 6 Independent Circuits
The advantage of a resettable circuit breaker over a fuse is well known however people find circuit breakers more expensive and difficult to install. The ST CLB Circuit Breaker Block solves this issue by using the compact, snap-in-place CLB resettable circuit breaker which makes breakers as easy to install as a fuse. Features Quick connect clips allow circuit breakers to snap easily into place Tin-plated copper busses and screw terminals Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements Easy to open clip on cover Breakouts allow wire access in two directions Accepts ring terminals Optional push button waterproof boots or dress nuts can be installed over cover . Accepts square labels
...Read more
Out of Stock
£34.93
Blue Sea 5037 Fuse Block ST Blade 6 Circuits Independent
Corrosion resistant, tin-plated copper fuse clips reduce heat and improve the efficiency of the electrical system. Accepts ring or snap fork type terminals. Includes two terminal block jumpers
...Read more
Out of Stock
£45.74
Blue Sea 5034 Fuse Block ST Blade 12 Circuits
Consolidates branch circuits and in-line fuses Positive distribution bus with #10-32 stud. Can be used for 24-hour circuits. Tin-plated copper buses and fuse clips. Accepts ring or snap fork type terminals. Accepts ATO® and ATC® fast acting blade fuses. Fuses sold separately
...Read more
Out of Stock
£82.34
Blue Sea 5032 Fuse Block ST Blade Dual12 with Grounding/cvr
Split Bus Fuse Block with ground for use when a mix of switched and 24-hour circuits are desired in the same block Provides two isolated groups of six ATO?/ATC? circuits . For use with either two isolated batteries or with a single battery providing a mix of 24 hour and switched circuits . Screw terminals for securing wires accept ring terminals . One-piece stainless flange nuts ensure safe and secure connections . Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements . Easy to open, push button latch for easy access to fuses . Tin-plated copper buses and fuse clips . Fuses sold separately
...Read more
Out of Stock
£40.34
Blue Sea 5030 Fuse Block ST Blade 6 Circuits with Grounding
Consolidates branch circuits and in-line fuses Positive distribution bus with #10-32 stud. Can be used for 24-hour circuits. Models available with or without a cover. Tin-plated copper buses and fuse clips. Accepts ring or snap fork type terminals. Accepts ATO® and ATC® fast acting blade fuses. Fuses sold separately
...Read more
Out of Stock
£34.74
Blue Sea 5024 Fuse Block ST Blade BTM 4 Circuits Kit
Easily add 4 fused circuits to the terminal of a battery Provides power to new accessories in your boat or vehicle. Mounts on the battery terminal stud . Screw terminals for securing wires . Nylon insulated ring terminals included for each screw terminal . Accepts small format circuit labels . Insulating cover meets ABYC/USCG insulation requirements . Ignition Protected?meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment . Includes a 4-circuit negative busbar. Includes write on labels . Includes four 16-14 AWG and four 12-10 AWG Nylon insulated ring terminals
...Read more
Out of Stock
£4.30
Blue Sea 5021 Fuse Holder AGC/MDL Water Resistant
Replaces fuse holder found in Contura Waterproof Fuse Panels. Easy to open. Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, and momentary immersions
...Read more
Out of Stock
£34.74
Blue Sea 5018 Fuse Block 3AG 6circuit
Innovative design allows for labeling, spare fuse storage, and easy fuse removal Clear insulating cover with label recesses for accept Large Format Labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements and storing spare fuses. Tin-plated copper buses and Phosphor Bronze fuse clips give 30 Ampere rating per circuit. Accepts AGC (Fast Acting), MDL (Time-Delay) and all other 3AG Glass Fuses
...Read more
Out of Stock
£49.09
Blue Sea 5015 Fuse Block 3AG 6circuit with ground
Innovative design allows for labeling, spare fuse storage, and easy fuse removal Clear insulating cover with label recesses for accept Large Format Labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements and storing spare fuses. Tin-plated copper buses and Phosphor Bronze fuse clips give 30 Ampere rating per circuit. Accepts AGC (Fast Acting), MDL (Time-Delay) and all other 3AG Glass Fuses
...Read more
Out of Stock
£183.86
Blue Sea 4378 Panel WD 12VDC CLB 8pos Grey (replaces 4378B-BSS)
Rated IP67-temporary immersion for 30 minutes. Designed for flybridge and open cockpit applications. Independent label backlighting allows switching and dimming. Compatible with all Blue Sea Systems Digital Dimmers. Available in 4 and 6 circuit models. Each panel can be mounted in four different orientations. Green LEDs aid low-light readability. All labels will be lit when the panel is powered, regardless of individual switch position.
...Read more
Out of Stock
£142.13
Blue Sea 4376 Panel WD 12VDC CLB 6pos Grey (replaces 4376B-BSS)
Rated IP67-temporary immersion for 30 minutes. Designed for flybridge and open cockpit applications. Independent label backlighting allows switching and dimming. Compatible with all Blue Sea Systems Digital Dimmers. Available in 4 and 6 circuit models. Each panel can be mounted in four different orientations. Green LEDs aid low-light readability. All labels will be lit when the panel is powered, regardless of individual switch position.
...Read more
Out of Stock
£121.25
Blue Sea 4374 Panel WD 12VDC CLB 4pos Grey (replaces 4374B-BSS)
Rated IP67-temporary immersion for 30 minutes. Designed for flybridge and open cockpit applications. Independent label backlighting allows switching and dimming. Compatible with all Blue Sea Systems Digital Dimmers. Available in 4 and 6 circuit models. Each panel can be mounted in four different orientations. Green LEDs aid low-light readability. All labels will be lit when the panel is powered, regardless of individual switch position.
...Read more
Out of Stock
£40.14
Blue Sea 4369 Panel Acc H2O 4 Socket Blank
Easy to install accessory panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options. Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only
...Read more
Out of Stock
£118.14
Blue Sea 4368 Panel Acc H2O 2 USBs, Socket, Voltmeter
Easy to install accessory panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options. Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only
...Read more
Out of Stock
£27.25
Blue Sea 4367 Panel Acc H2O 3 Socket Blank
Easy to install accessory panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options. Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only
...Read more
Out of Stock
£95.82
Blue Sea 4366 Panel Acc H2O USB, Socket & Voltmeter
Easy to install accessory panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options. Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only
...Read more
Out of Stock
£67.58
Blue Sea 4365 Panel Acc H2O 2 USBs & Socket
Easy to install accessory panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options. Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only
...Read more
Out of Stock
£23.50
Blue Sea 4364 Panel Acc H2O 2 Socket Blank
Easy to install accessory panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options. Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only
...Read more
Out of Stock
£21.46
Blue Sea 4357 Panel BelowDeck 3 Socket Blank (replaces 4357B-BSS)
Easy to install BelowDeck panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options. Pre-wired harness included in all panels for easy installation Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only
...Read more
Out of Stock
£87.94
Blue Sea 4356 Panel BelowDeck 12VDC Socket, USB & Voltmeter (replaces 4356B-BSS)
Easy to install BelowDeck panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options. Pre-wired harness included in all panels for easy installation Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only
...Read more
Out of Stock
£60.50
Blue Sea 4355 Panel BelowDeck 12VDC Socket & 2 USBs (replaces 4355B-BSS)
Easy to install BelowDeck panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options. Pre-wired harness included in all panels for easy installation Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only
...Read more
Out of Stock
£17.81
Blue Sea 4354 Panel BelowDeck 2 Socket Blank (replaces 4354B-BSS)
Easy to install BelowDeck panels include a 15A circuit breaker switch and pre-wired harness. Panels offer customizable 12V charging and monitoring options. Pre-wired harness included in all panels for easy installation Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only
...Read more
Out of Stock
£43.58
Blue Sea 4353 Panel BelowDeck 12VDC Socket & USB
Compact easy to install DC charging center. The integrated circuit breaker switch provides circuit protection and offers the ability to shut off the panel, preventing parasitic draw. Illuminated Carling Technologies? 15A circuit breaker switch. Pre-wired harness. Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode. Simple two-wire installation
...Read more
Out of Stock
£46.00
Blue Sea 4352 Panel BelowDeck 12VDC CB 6 Positive
West Marine Part Number 8932 DURABLE Molded panel frame will stand up to UV and salt air EASY Low profile makes it easy to install in tight spaces SIMPLE Fast-on circuit breaker connectors make it quick to wire CONVENIENT Red “ON” indicating LEDs for safe operation in low light conditions 6 Carling Technologies™ 15A circuit breakers. Illuminated ON indication. Polycarbonate/ABS panel surface is UV-stabilized, flame retardant, and will not corrode. Quick connect BUS eliminates wire harness and clutter contributing to a low profile panel. Two-wire connection for powering all panels is simple and requires #10 ring terminals. Terminals screw to bus bars for secure connections. Set of 15 square format circuit labels are included, and are easy to replace. Additional standard or custom labels are available through Blue Sea Systems. Stainless steel #6 x 5/8″ mounting screws included
...Read more
Out of Stock
£35.74
Blue Sea 4350 Panel BelowDeck 12VDC CB 4 Positive
West Marine Part Number 8930 DURABLE Molded panel frame will stand up to UV and salt air EASY Low profile makes it easy to install in tight spaces SIMPLE Fast-on circuit breaker connectors make it quick to wire CONVENIENT Red “ON” indicating LEDs for safe operation in low light conditions 4 Carling Technologies™ 15A circuit breakers. Illuminated ON indication. Polycarbonate/ABS panel surface is UV-stabilized, flame retardant, and will not corrode. Quick connect BUS eliminates wire harness and clutter contributing to a low profile panel. Two-wire connection for powering all panels is simple and requires #5 ring terminals. Terminals screw to bus bars for secure connections. Set of 15 square format circuit labels are included, and are easy to replace. Additional standard or custom labels are available through Blue Sea Systems. Stainless steel #6 x 5/8″ mounting screws included
...Read more
Out of Stock
£47.02
Blue Sea 4325 Panel Switch H2O CB 6pos Camo (replaces 4325B-BSS)
Designed for exposed mounting applications Illuminated 15A circuit breakers provide switching, ?ON? indication and overcurrent protection Industry-standard sizes and mounting allow these panels to be easily retroftted in an existing application Polycarbonate/ABS panel surface is UV-stabilized, ?ame retardant, and will not corrode Silicon breaker boots and gasket protects against water ingress Low profle makes it easy to install in tight spaces Fast-on circuit breaker connectors make it quick to wire Two-wire connection for powering all panels is simple and requires #10 ring terminals. Terminals screw to bus bars for secure connections Set of 15 square format circuit labels are included, and are easy to replace. Additional standard or custom labels are available through Blue Sea Systems
...Read more
Out of Stock
£61.10
Blue Sea 4324 Panel Switch H2O CB 4pos Socket & USB Camo (replaces 4324B-BSS)
Designed for exposed mounting applications Illuminated 15A circuit breakers provide switching, ?ON? indication and overcurrent protection Industry-standard sizes and mounting allow these panels to be easily retroftted in an existing application Polycarbonate/ABS panel surface is UV-stabilized, ?ame retardant, and will not corrode Silicon breaker boots and gasket protects against water ingress Low profle makes it easy to install in tight spaces Fast-on circuit breaker connectors make it quick to wire Two-wire connection for powering all panels is simple and requires #10 ring terminals. Terminals screw to bus bars for secure connections Set of 15 square format circuit labels are included, and are easy to replace. Additional standard or custom labels are available through Blue Sea Systems
...Read more
Out of Stock
£37.58
Blue Sea 4323 Panel Switch H2O CB 4pos Camo (replaces 4323B-BSS)
Designed for exposed mounting applications Illuminated 15A circuit breakers provide switching, ?ON? indication and overcurrent protection Industry-standard sizes and mounting allow these panels to be easily retroftted in an existing application Polycarbonate/ABS panel surface is UV-stabilized, ?ame retardant, and will not corrode Silicon breaker boots and gasket protects against water ingress Low profle makes it easy to install in tight spaces Fast-on circuit breaker connectors make it quick to wire Two-wire connection for powering all panels is simple and requires #10 ring terminals. Terminals screw to bus bars for secure connections Set of 15 square format circuit labels are included, and are easy to replace. Additional standard or custom labels are available through Blue Sea Systems
...Read more
Out of Stock
£42.30
Blue Sea 4322 Panel Switch H2O CB 6pos Grey (replaces 4322B-BSS)
Designed for exposed mounting applications Illuminated 15A circuit breakers provide switching, ?ON? indication and overcurrent protection Industry-standard sizes and mounting allow these panels to be easily retroftted in an existing application Polycarbonate/ABS panel surface is UV-stabilized, ?ame retardant, and will not corrode Silicon breaker boots and gasket protects against water ingress Low profle makes it easy to install in tight spaces Fast-on circuit breaker connectors make it quick to wire Two-wire connection for powering all panels is simple and requires #10 ring terminals. Terminals screw to bus bars for secure connections Set of 15 square format circuit labels are included, and are easy to replace. Additional standard or custom labels are available through Blue Sea Systems
...Read more
Out of Stock
£61.89
Blue Sea 4321 Panel Switch H2O CB 4pos Socket & USB Grey (replaces 4321B-BSS)
Designed for exposed mounting applications Illuminated 15A circuit breakers provide switching, ?ON? indication and overcurrent protection Industry-standard sizes and mounting allow these panels to be easily retroftted in an existing application Polycarbonate/ABS panel surface is UV-stabilized, ?ame retardant, and will not corrode Silicon breaker boots and gasket protects against water ingress Low profle makes it easy to install in tight spaces Fast-on circuit breaker connectors make it quick to wire Two-wire connection for powering all panels is simple and requires #10 ring terminals. Terminals screw to bus bars for secure connections Set of 15 square format circuit labels are included, and are easy to replace. Additional standard or custom labels are available through Blue Sea Systems
...Read more
Out of Stock
£32.94
Blue Sea 4320 Panel Switch H2O CB 4pos Grey (replaces 4320B-BSS)
Designed for exposed mounting applications Illuminated 15A circuit breakers provide switching, ?ON? indication and overcurrent protection Industry-standard sizes and mounting allow these panels to be easily retroftted in an existing application Polycarbonate/ABS panel surface is UV-stabilized, ?ame retardant, and will not corrode Silicon breaker boots and gasket protects against water ingress Low profle makes it easy to install in tight spaces Fast-on circuit breaker connectors make it quick to wire Two-wire connection for powering all panels is simple and requires #10 ring terminals. Terminals screw to bus bars for secure connections Set of 15 square format circuit labels are included, and are easy to replace. Additional standard or custom labels are available through Blue Sea Systems
...Read more
Out of Stock
£85.68
Blue Sea 4309 Panel WD Switch Only 8pos Grey (replaces 4309B-BSS)
Many switch panels mounted on the dash or flybridge do not stand up to harsh marine environment. WeatherDeck® Switch Panels are waterproof and rated IP67 (for temporary immersion in water) and use materials that won't deteriorate in the harsh sun, salt, and water. Many small boats, which already have circuit protection and do not run at night, simply need a switch panel which is waterproof. The WeatherDeck® Switch Panel has all the rugged features of the proven WeatherDeck® Panel family however does not have the added cost of backlighting and circuit protection. Integrated switch guards reduce the risk of accidental switching. Panels can be mounted in four different orientations. Panel front rated IP67 when properly mounted with watertight mounting gasket. IP67 ? protected against immersion up to 1 meter for 30 minutes. UV stabilized weather-resistant faceplate snaps on and off providing access to components and concealing mouting screws
...Read more
Out of Stock
£175.60
Blue Sea 4308 Panel WD 12VDC Fused 8pos Grey (replaces 4308B-BSS)
Panel front rated IP67 when properly mounted with watertight mounting gasket. IP67 ? protected against immersion up to 1 meter for 30 minutes. Designed for flybridge and open cockpit applications. Independent label backlighting circuit for remote switching and dimming. Available in 2, 4, 6, and 8 circuit models. Each panel can be mounted in four different orientations. Integrated ATO/ATC fuse based circuit protection. Bicolored LEDs?illuminate circuit labels to quickly identify OFF (Red), ON (Green), or Blown (No Color) circuits. No lights in any position likely indicate there is no power to the panel.
...Read more
Out of Stock
£68.77
Blue Sea 4307 Panel WD Switch Only 6pos Grey (replaces 4307B-BSS)
Many switch panels mounted on the dash or flybridge do not stand up to harsh marine environment. WeatherDeck® Switch Panels are waterproof and rated IP67 (for temporary immersion in water) and use materials that won't deteriorate in the harsh sun, salt, and water. Many small boats, which already have circuit protection and do not run at night, simply need a switch panel which is waterproof. The WeatherDeck® Switch Panel has all the rugged features of the proven WeatherDeck® Panel family however does not have the added cost of backlighting and circuit protection. Integrated switch guards reduce the risk of accidental switching. Panels can be mounted in four different orientations. Panel front rated IP67 when properly mounted with watertight mounting gasket. IP67 ? protected against immersion up to 1 meter for 30 minutes. UV stabilized weather-resistant faceplate snaps on and off providing access to components and concealing mouting screws
...Read more
Out of Stock
£125.04
Blue Sea 4306 Panel WD 12VDC Fused 6pos Grey (replaces 4306B-BSS)
Panel front rated IP67 when properly mounted with watertight mounting gasket. IP67 ? protected against immersion up to 1 meter for 30 minutes. Designed for flybridge and open cockpit applications. Independent label backlighting circuit for remote switching and dimming. Available in 2, 4, 6, and 8 circuit models. Each panel can be mounted in four different orientations. Integrated ATO/ATC fuse based circuit protection. Bicolored LEDs?illuminate circuit labels to quickly identify OFF (Red), ON (Green), or Blown (No Color) circuits. No lights in any position likely indicate there is no power to the panel.
...Read more
Out of Stock
£52.14
Blue Sea 4305 Panel WD Switch Only 4pos Grey (replaces 4305B-BSS)
Many switch panels mounted on the dash or flybridge do not stand up to harsh marine environment. WeatherDeck® Switch Panels are waterproof and rated IP67 (for temporary immersion in water) and use materials that won't deteriorate in the harsh sun, salt, and water. Many small boats, which already have circuit protection and do not run at night, simply need a switch panel which is waterproof. The WeatherDeck® Switch Panel has all the rugged features of the proven WeatherDeck® Panel family however does not have the added cost of backlighting and circuit protection. Integrated switch guards reduce the risk of accidental switching. Panels can be mounted in four different orientations. Panel front rated IP67 when properly mounted with watertight mounting gasket. IP67 ? protected against immersion up to 1 meter for 30 minutes. UV stabilized weather-resistant faceplate snaps on and off providing access to components and concealing mouting screws
...Read more
Out of Stock
£88.54
Blue Sea 4304 Panel WD 12VDC Fused 4pos Grey (replaces 4304B-BSS)
Panel front rated IP67 when properly mounted with watertight mounting gasket. IP67 ? protected against immersion up to 1 meter for 30 minutes. Designed for flybridge and open cockpit applications. Independent label backlighting circuit for remote switching and dimming. Available in 2, 4, 6, and 8 circuit models. Each panel can be mounted in four different orientations. Integrated ATO/ATC fuse based circuit protection. Bicolored LEDs?illuminate circuit labels to quickly identify OFF (Red), ON (Green), or Blown (No Color) circuits. No lights in any position likely indicate there is no power to the panel.
...Read more
Out of Stock
£34.26
Blue Sea 4303 Panel WD Switch Only 2pos Grey (replaces 4303B-BSS)
Many switch panels mounted on the dash or flybridge do not stand up to harsh marine environment. WeatherDeck® Switch Panels are waterproof and rated IP67 (for temporary immersion in water) and use materials that won?t deteriorate in the harsh sun, salt, and water. Many small boats, which already have circuit protection and do not run at night, simply need a switch panel which is waterproof. The WeatherDeck® Switch Panel has all the rugged features of the proven WeatherDeck® Panel family however does not have the added cost of backlighting and circuit protection. Integrated switch guards reduce the risk of accidental switching. Panels can be mounted in four different orientations. Panel front rated IP67 when properly mounted with watertight mounting gasket. IP67 ? protected against immersion up to 1 meter for 30 minutes. UV stabilized weather-resistant faceplate snaps on and off providing access to components and concealing mouting screws
...Read more
Out of Stock
£63.52
Blue Sea 4302 Panel WD 12VDC Fused 2pos Grey (replaces 4302B-BSS)
Panel front rated IP67 when properly mounted with watertight mounting gasket. IP67 ? protected against immersion up to 1 meter for 30 minutes. Designed for flybridge and open cockpit applications. Independent label backlighting circuit for remote switching and dimming. Available in 2, 4, 6, and 8 circuit models. Each panel can be mounted in four different orientations. Integrated ATO/ATC fuse based circuit protection. Bicolored LEDs?illuminate circuit labels to quickly identify OFF (Red), ON (Green), or Blown (No Color) circuits. No lights in any position likely indicate there is no power to the panel.
...Read more
Out of Stock
£13.18
Blue Sea 4230 Label Kit SS Button Switch Back Lit
50 ICON Labels used on Backlit Push Button Switches Scratch resistant polycarbonate material Back printed for durability Waterproof adhesive for longevity in wet environments
...Read more
Out of Stock
£13.47
Blue Sea 4218 Label Kit DC H2O 30 Square Black V2
Included with Battery Main Distribution Panels. Reinforced, weatherproof material. Used on WeatherDeck Waterproof Panels. Used on Battery Management Panels
...Read more
Out of Stock
£19.47
Blue Sea 4217 Label Kit DC H2O 120 Square Black
Reinforced, weatherproof material. Used on WeatherDeck Waterproof Panels. Used on Battery Management Panels
...Read more
Out of Stock
£14.96
Blue Sea 4216 Label Kit DC H2O 60 Square Black
Reinforced, weatherproof material. Used on WeatherDeck Waterproof Panels. Used on Battery Management Panels
...Read more
Out of Stock
£13.47
Blue Sea 4215 Label Kit DC H2O 30 Square Black V1
Included with WeatherDeck Waterproof Panels. Reinforced, weatherproof material. Used on WeatherDeck Waterproof Panels. Used on Battery Management Panels
...Read more
Out of Stock
£57.65
Blue Sea 4192 Switch Button Stainless Steel 20A Off-On Red
20A Continuous Single Pole Single Throw Available in Blue ; Red Available in momentary and non-momentary 14 AWG pigtail ? positive & load connections .187inch quick connect ? LED ground (included in retail package)
...Read more
Out of Stock
£57.65
Blue Sea 4190 Switch Button Stainless Steel 20A Off-On Blue
20A Continuous Single Pole Single Throw Available in Blue ; Red 14 AWG pigtail ? positive & load connections .187inch quick connect ? LED ground (included in retail package)
...Read more
Out of Stock
£51.74
Blue Sea 4180 Switch Button Stainless Steel Off-On Back Lit (incl 5 Icon labels)
Backlit button is blue when OFF and red when ON Five ICON labels included: Accessory, Lights, Anchor Light, Running Light, and Bilge Pump Additional 50 ICON label kit sold separately
...Read more
Out of Stock
£18.80
Blue Sea 4163 Switch Button Stainless Steel 10A Off-(On) Red
10A continuous Single Pole Double Throw or Single Pole Single Throw Can be wired for normally open or normally closed Available in Blue ; Red Available in momentary and non-momentary Installs with .110inch quick connects (included in retail package)
...Read more
Out of Stock
£18.80
Blue Sea 4162 Switch Button Stainless Steel 10A Off-On Red
10A continuous Single Pole Double Throw or Single Pole Single Throw Can be wired for normally open or normally closed Available in Blue ; Red Available in momentary and non-momentary Installs with .110inch quick connects (included in retail package)
...Read more
Out of Stock
£18.80
Blue Sea 4161 Switch Button Stainless Steel 10A Off-(On) Blue
10A continuous Single Pole Double Throw or Single Pole Single Throw Can be wired for normally open or normally closed Available in Blue ; Red Available in momentary and non-momentary Installs with .110inch quick connects (included in retail package)
...Read more
Out of Stock
£18.80
Blue Sea 4160 Switch Button Stainless Steel 10A Off-On Blue
10A continuous Single Pole Double Throw or Single Pole Single Throw Can be wired for normally open or normally closed Available in Blue ; Red Available in momentary and non-momentary Installs with .110inch quick connects (included in retail package)
...Read more
Out of Stock
£15.34
Blue Sea 4155 Switch WD Toggle DPDT On-Off-On
Specially manufactured by Carling Technologies for use in Blue Sea Systems' WeatherDeck? Panels. When mounted with a WeatherDeck? Toggle Switch Boot Rated IP67-temporary immersion for 30 minutes. Nickel-plated brass and phenolic non-corrosive construction
...Read more
Out of Stock
£6.40
Blue Sea 4154 Switch WD Toggle SPST (On)-Off-(On)
Specially manufactured by Carling Technologies for use in Blue Sea Systems' WeatherDeck? Panels. When mounted with a WeatherDeck? Toggle Switch Boot Rated IP67-temporary immersion for 30 minutes. Nickel-plated brass and phenolic non-corrosive construction
...Read more
Out of Stock
£6.40
Blue Sea 4153 Switch WD Toggle SPST (On)-Off-On
Specially manufactured by Carling Technologies for use in Blue Sea Systems' WeatherDeck? Panels. When mounted with a WeatherDeck? Toggle Switch Boot Rated IP67-temporary immersion for 30 minutes. Nickel-plated brass and phenolic non-corrosive construction
...Read more
Out of Stock
£6.40
Blue Sea 4152 Switch WD Toggle SPST On-Off-On
Specially manufactured by Carling Technologies for use in Blue Sea Systems' WeatherDeck? Panels. When mounted with a WeatherDeck? Toggle Switch Boot Rated IP67-temporary immersion for 30 minutes. Nickel-plated brass and phenolic non-corrosive construction
...Read more
Out of Stock
£6.40
Blue Sea 4151 Switch WD Toggle SPST (On)-Off
Specially manufactured by Carling Technologies for use in Blue Sea Systems' WeatherDeck? Panels. When mounted with a WeatherDeck? Toggle Switch Boot Rated IP67-temporary immersion for 30 minutes. Nickel-plated brass and phenolic non-corrosive construction
...Read more
Out of Stock
£6.40
Blue Sea 4150 Switch WD Toggle SPST On-Off
Specially manufactured by Carling Technologies for use in Blue Sea Systems' WeatherDeck? Panels. When mounted with a WeatherDeck? Toggle Switch Boot Rated IP67-temporary immersion for 30 minutes. Nickel-plated brass and phenolic non-corrosive construction
...Read more
Out of Stock
£10.62
Blue Sea 4141 Switch Meter Toggle SPTT On-On-ON
Used for battery bank selection with voltmeters, or multimeters, in digital, or analog format. Include a three position battery bank label
...Read more
Out of Stock
£4.24
Blue Sea 4138 Boot Toggle Switch Black
Replaces dress nut for mounting on WeatherDeck? Panel Switches. Rated IP67-temporary immersion for 30 minutes. UV resistant material resists discoloration and cracking
...Read more
Out of Stock
£4.03
Blue Sea 4137 Boot Reset Button Black
Replaces standard mounting nut for mounting on Thermal Push Button Circuit Breakers only. UV resistant material resists discoloration and cracking. Two per retail package
...Read more
Out of Stock
£4.03
Blue Sea 4136 Boot Reset Button White
Replaces standard mounting nut for mounting on Thermal Push Button Circuit Breakers only. UV resistant material resists discoloration and cracking. Two per retail package
...Read more
Out of Stock
£4.03
Blue Sea 4135 Boot Reset Button Clear
Replaces standard mounting nut for mounting on Thermal Push Button Circuit Breakers only. UV resistant material resists discoloration and cracking. Two per retail package
...Read more
Out of Stock
£30.78
Blue Sea 4131 Lockout Slide 2pos Triple Pole C-Series
Allows only 1 of a pair of double pole or triple pole AC circuit breakers to be activated at a time. Guarantees that AC power from 2 sources (power company and genset or inverter) will not be mixed. Fits all double pole or triple pole C-Series circuit breakers. Uses circuit breaker mounting screw holes. Requires no special panel modification. Includes mounting screws
...Read more
Out of Stock
£30.78
Blue Sea 4130 Lockout Slide 2pos Double Pole C-Series
Allows only 1 of a pair of double pole or triple pole AC circuit breakers to be activated at a time. Guarantees that AC power from 2 sources (power company and genset or inverter) will not be mixed. Fits all double pole or triple pole C-Series circuit breakers. Uses circuit breaker mounting screw holes. Requires no special panel modification. Includes mounting screws
...Read more
Out of Stock
£17.12
Blue Sea 4126 Lockout Slide 3pos Double Pole
Allows only 1 double pole AC circuit breaker to be activated at a time. Guarantees that AC power from 2 or 3 sources (shore power and genset or inverter) will not be mixed. Fits all World or A-Series and Rocker double pole circuit breakers. Uses circuit breaker mounting screw holes. Requires no special panel modification. Includes mounting screws
...Read more
Out of Stock
£15.84
Blue Sea 4125 Lockout Slide 2pos Double Pole
Allows only 1 double pole AC circuit breaker to be activated at a time. Guarantees that AC power from 2 or 3 sources (shore power and genset or inverter) will not be mixed. Fits all World or A-Series and Rocker double pole circuit breakers. Uses circuit breaker mounting screw holes. Requires no special panel modification. Includes mounting screws
...Read more
Out of Stock
£23.31
Blue Sea 4121 Panel 360 Backlight DC CLB Module
Enables backlighting for the Push Button Reset-Only Circuit Breaker and Rocker Switch 360 Panels
...Read more
Out of Stock
£4.72
Blue Sea 4119 Rocker Series Rocker-Switch Adapter (replaces 4119B-BSS)
Adapts 360 Panel Rocker Switches to the circuit breaker aperture of the 360 Panels
...Read more
Out of Stock
£4.72
Blue Sea 4116 Plug Panel 360 Kit Rocker Series
Plug Panel 360 Kit Rocker Series Blue Sea PN 4116
...Read more
Out of Stock
£7.57
Blue Sea 4113 Panel 360 Kit Conversion 12-24V (replaces 4113B-BSS)
Convert a 12 Volt DC 360 Panel with rocker or toggle circuit breakers to a 24 Volt panel. Requires one kit per 12 Volt DC circuit breaker module. Includes wire harness and panel identification label
...Read more
0 Kits Selected✕
Recommended Full Kits
Loading...
£3,096.12
£2,658.96
£2,576.49
£2,409.49
£2,610.30
Loading...
£2,576.49
£2,409.49
£2,438.68
£2,223.66
£2,610.30
£1,392.64
£2,129.28
£2,316.26
£2,223.66
Loading...
£3,997.58
£4,130.58
£3,780.58
£3,096.12
£2,658.96
£2,576.49
£2,409.49
Loading...
£1,287.58
£1,019.18
£1,543.99
£2,373.90
£1,681.63
£1,287.58
£1,019.18
£1,543.99