Sterling Power Products
Van Junkies are stockists of Sterling power products, our range encompasses the most popular 12v & 240v power inverters, battery chargers, marine waterproof power and split charge battery to battery charging products.
15 Products Found
Out of Stock
£89.99
Sterling BM12123 Battery Maintainer.
This unit is perfect for keeping your campervan's starter battery topped up by transferring excess power from the leisure battery, which is especially useful when solar panels are charging the leisure battery. Once your leisure battery reaches about 13.3V, the unit activates, allowing surplus energy to flow to maintain the starter battery.
While it doesn't offer fast charging or boosting, it mirrors the input voltage with only a small drop (typically around 0.2V less than the primary charge), which is more than sufficient to keep the starter battery topped up and cover small loads like the battery's internal discharge and the engine management system (up to 1A continuous). This feature is invaluable during periods of non-use, ensuring your starter battery stays healthy without the need for external charging.
This unit is the perfect substitute for a dual-output solar charge controller. Instead of needing a solar controller with dual outputs to manage both your leisure and starter batteries, this unit simplifies the process by allowing excess power from the leisure battery to maintain the starter battery. With solar panels continuously topping up the leisure battery, this device efficiently manages the distribution of surplus energy, ensuring both batteries stay charged without the need for more complex or expensive equipment. It's an ideal solution for those looking to streamline their campervan's electrical system while keeping both batteries in good condition.
Victron Dual Output MPPT Solar Charge Controller - It doesn't exist but this is the perfect alternative!
...Read more
£537.50
Combined Solar & Split Charge kit (Victron 185w Panel & Sterling BBS1230)
Combined Solar & Split Charge kit (Victron 185w Panel & Sterling BBS1230)
The new combined battery-to-battery charger and solar regulator from Sterling Power maximizes the operational usage of the battery-to-battery charger. It does this by adding a solar operation to the product both when the vehicle is in motion and moreover when the vehicle is stationary. This makes it, in effect, also a free 350W solar regulator when the vehicle is stationary. This product has all the benefits of the standard 30A Battery to Battery charger when the engine is on.
This kit comprises of the following:
Sterling BBS1230 combined B2B Split charger / Solar MMPTVictron 185w Monocrystalline Solar PanelSolar Panel Z Bracket Mount (Call if you require other mount types)6mm (5m) Solar Extension Cables with MC4 connectorsDouble Entry Roof GlandResettable Circuit Breaker16mm Battery Cable ( 1 to 10m ) Red & Black2 x Victron Mega Fuse Holders2 x 60amp Mega FusesCable Terminal Lugs
Features
1) Multiple Activation Modes: Automatic for most non-vehicle applications,
Manual for remote activation.
Regenerative braking (requiring ignition feed),
Automatic regenerative braking, requiring no ignition feed.
2) Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mode allows you to override this.
3) Safety features:
100% fire proof plastic box.
No screws to corrode.
Thermal power reduction.
Multi-stage fan cooling
4) Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down.
5) Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages.
6) B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V).
7) Customizable Profile: Choose your own charging profile on the front panel.
8) 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid.
9) 4-stage battery charging: The B2B charges batteries between 5-20 times faster than a stand-alone alternator.
10) Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking).
Remote control is optional.
Brand
Sterling Power
Manufacturer Part Number
BBS1230
DC V (in)
12V
DC V (out)
12V
Current (A)
30A input, 350W solar
Dimensions
L190 x W160 x D50mm
Weight (kg)
1.5Kg
Warranty
2 Years
...Read more
View Product
£235.99
Sterling BBS1230 'Pro Batt Ultra' Battery-To-Battery Charger +MPPT Solar Controller
Sterling BBS1230 'Pro Batt Ultra' Battery-To-Battery Charger 12V/12V 30A with combined 350w MPPT Solar Controller
The new combined battery-to-battery charger and solar regulator maximizes the operational usage of the battery-to-battery charger. It does this by adding a solar operation to the product both when the vehicle is in motion and moreover when the vehicle is stationary. This makes it, in effect, also a free 350W solar regulator when the vehicle is stationary. This product has all the benefits of the standard 30A Battery to Battery charger when the engine is on.
Features
1) Multiple Activation Modes: Automatic for most non-vehicle applications,
Manual for remote activation.
Regenerative braking (requiring ignition feed),
Automatic regenerative braking, requiring no ignition feed.
2) Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mode allows you to override this.
3) Safety features:
100% fire proof plastic box.
No screws to corrode.
Thermal power reduction.
Multi-stage fan cooling
4) Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down.
5) Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages.
6) B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V).
7) Customizable Profile: Choose your own charging profile on the front panel.
8) 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid.
9) 4-stage battery charging: The B2B charges batteries between 5-20 times faster than a stand-alone alternator.
10) Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking).
Remote control is optional.
Brand
Sterling Power
Manufacturer Part Number
BBS1230
DC V (in)
12V
DC V (out)
12V
Current (A)
30A input, 350W solar
Dimensions
L190 x W160 x D50mm
Weight (kg)
1.5Kg
Warranty
2 Years
...Read more
View Product
£663.99
Sterling Power 48V 15A Digital Battery Charger - PCU4815
Sterling Power PCU4815
With years of experience in this market everything Sterling Power could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take their word for it. This was confirmed on its first competative test with Sailing Today Magazine where it won premium product against the toughest competitiors (Mastervolt and victron plus others). It was described as "this has to be the most flexible marine charger on the market today". Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently relseased onto the market.
Benefits
- Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity.
- Battery Temperature compensation sensor included.
- Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses.
- Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish.
- 11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel.
- Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability
Technical Specification
DC V
48 V
Rating (A)
15 A
Length
315 mm
Width
215 mm
Height
90 mm
Weight
3 kg
Warranty
5 Years
...Read more
View Product
£567.99
Sterling Power Pro Charge ULTRA Charger 12V 60A (3 out) PCU1260
With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market.
Features
Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity.
Battery Temperature compensation sensor included.
Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated.
Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections.
Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability.
Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V).
Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses.
Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish
11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel.
Brand
Sterling Power
Manufacturer Part Number
PCU1260
Voltage
12
Charger Amps
Dimensions
L315 x W215 x D90mm
Weight (kg)
3
Warranty
5 Years
...Read more
View Product
£335.32
Sterling Power Pro Charge ULTRA Battery Charger 12V 20A (3 out) PCU1220
With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market.
Features
Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity.
Battery Temperature compensation sensor included.
Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated.
Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections.
Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability.
Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V).
Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses.
Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish
11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel.
Brand
Sterling Power
Manufacturer Part Number
PCU1220
Voltage
12
Charger Amps
Dimensions
L260 x W215 x D90mm
Weight (kg)
2
Warranty
5 Years
...Read more
View Product
£219.95
Sterling Power Pro Charge ULTRA Battery Charger 12V 10A (2 out) PCU1210
With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market.
Features
Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity.
Battery Temperature compensation sensor included.
Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated.
Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections.
Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability.
Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V).
Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses.
Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish
11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel.
Brand
Sterling Power
Manufacturer Part Number
PCU1210
Voltage
12
Charger Amps
Dimensions
L260 x W215 x D90mm
Weight (kg)
2
Warranty
2 Years
...Read more
View Product
£909.99
Combined Solar & Split Charge kit (Pro 270w Flex Panel & Sterling BBS1230)
Combined Solar & Split Charge kit (Pro 270w Flexible Panel & Sterling BBS1230)
The new combined battery-to-battery charger and solar regulator from Sterling Power maximizes the operational usage of the battery-to-battery charger. It does this by adding a solar operation to the product both when the vehicle is in motion and moreover when the vehicle is stationary. This makes it, in effect, also a free 350W solar regulator when the vehicle is stationary. This product has all the benefits of the standard 30A Battery to Battery charger when the engine is on.
This kit comprises of the following:
Sterling BBS1230 combined B2B Split charger / Solar MMPT1 x 270w Pro Semi-Flexible Monocrystalline Solar Panel - 5 year warranty6mm (5m) Solar Extension Cables with MC4 connectorsDouble Entry Roof GlandResettable Circuit Breaker16mm Battery Cable ( 1 to 10m ) Red & Black2 x Victron Mega Fuse Holders2 x 60amp Mega FusesCable Terminal LugsSikaflex 522
Features
1) Multiple Activation Modes: Automatic for most non-vehicle applications,
Manual for remote activation.
Regenerative braking (requiring ignition feed),
Automatic regenerative braking, requiring no ignition feed.
2) Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mode allows you to override this.
3) Safety features:
100% fire proof plastic box.
No screws to corrode.
Thermal power reduction.
Multi-stage fan cooling
4) Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down.
5) Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages.
6) B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V).
7) Customizable Profile: Choose your own charging profile on the front panel.
8) 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid.
9) 4-stage battery charging: The B2B charges batteries between 5-20 times faster than a stand-alone alternator.
10) Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking).
Remote control is optional.
Brand
Sterling Power
Manufacturer Part Number
BBS1230
DC V (in)
12V
DC V (out)
12V
Current (A)
30A input, 350W solar
Dimensions
L190 x W160 x D50mm
Weight (kg)
1.5Kg
Warranty
2 Years
...Read more
View Product
£671.50
Combined Solar & Split Charge kit (Victron 370w Panels & Sterling BBS1230)
Combined Solar & Split Charge kit (Victron 370w Panels & Sterling BBS1230)
The new combined battery-to-battery charger and solar regulator from Sterling Power maximizes the operational usage of the battery-to-battery charger. It does this by adding a solar operation to the product both when the vehicle is in motion and moreover when the vehicle is stationary. This makes it, in effect, also a free 350W solar regulator when the vehicle is stationary. This product has all the benefits of the standard 30A Battery to Battery charger when the engine is on.
This kit comprises of the following:
Sterling BBS1230 combined B2B Split charger / Solar MMPT2 x Victron 185w Monocrystalline Solar Panel Solar Panel Z Bracket Mount (Call if you require other mount types)6mm (5m) Solar Extension Cables with MC4 connectorsDouble Entry Roof GlandResettable Circuit Breaker16mm Battery Cable ( 1 to 10m ) Red & Black2 x Victron Mega Fuse Holders2 x 60amp Mega FusesCable Terminal Lugs
Features
1) Multiple Activation Modes: Automatic for most non-vehicle applications,
Manual for remote activation.
Regenerative braking (requiring ignition feed),
Automatic regenerative braking, requiring no ignition feed.
2) Current is NOT taken from the input battery and given to the output battery. The B2B uses alternator power to charge the output battery. Manual mode and regenerative braking mode allows you to override this.
3) Safety features:
100% fire proof plastic box.
No screws to corrode.
Thermal power reduction.
Multi-stage fan cooling
4) Night Time Setting: Allows the unit to ran at half the power so the fan noise is kept down.
5) Boost / Reduce Charging: The B2Bs ensure batteries get the correct charging profile irrespective of high or low input voltages.
6) B2B turns on at 13.3V and turns off at 13.0V (x 2 for 24V). Thus, does not drain input battery. Regenerative braking mode allows the input voltage to drop to 12.2V (x 2 for 24V).
7) Customizable Profile: Choose your own charging profile on the front panel.
8) 9 preset battery chemistry options: Including AGM, LiFePO4, Gel, Flooded and sealed lead acid.
9) 4-stage battery charging: The B2B charges batteries between 5-20 times faster than a stand-alone alternator.
10) Very Simple to install: No electronic Control Unit (ECU) issues. No complex wiring. No warranty issues. Fully prepared for smart alternators (regenerative braking).
Remote control is optional.
Brand
Sterling Power
Manufacturer Part Number
BBS1230
DC V (in)
12V
DC V (out)
12V
Current (A)
30A input, 350W solar
Dimensions
L190 x W160 x D50mm
Weight (kg)
1.5Kg
Warranty
2 Years
...Read more
View Product
£654.99
Sterling Power Pro Charge Ultra Battery Charger 36V 20A (3 out) – PCU3620
With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market.
Features
Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity.
Battery Temperature compensation sensor included.
Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated.
Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections.
Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability.
Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V).
Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses.
Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish
11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel.
Brand
Sterling Power
Manufacturer Part Number
PCU3620
Voltage
36
Charger Amps
Dimensions
L315 x W215 x D90mm
Weight (kg)
3
Warranty
2 Years
...Read more
View Product
£549.99
Sterling Power Pro Charge Ultra Battery Charger 24V 20A (3 out) – PCU2420
With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market.
Features
Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity.
Battery Temperature compensation sensor included.
Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated.
Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections.
Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability.
Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V).
Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses.
Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish
11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel.
Brand
Sterling Power
Manufacturer Part Number
PCU2420
Voltage
24
Charger Amps
Dimensions
L260 x W215 x D90mm
Weight (kg)
2
Warranty
5 Years
...Read more
View Product
Out of Stock
£368.00
Sterling Power Battery to Battery Charger, Waterproof 12/12V 60A – BBW1260
Waterproof ( built to ) IP66. These units have the benefit of being epoxy potted so that the charger is sealed off from water and dirt ingress. The cooling fan is not sealed and is rated at IP55, the fan is designed to be easily replaced in the event of major immersion.
...Read more
£530.99
Sterling Power Pro Charge ULTRA Battery Charger 12V 50A (3 out) PCU1250
With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market.
Features
Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity.
Battery Temperature compensation sensor included.
Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated.
Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections.
Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability.
Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V).
Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses.
Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish
11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel.
Brand
Sterling Power
Manufacturer Part Number
PCU1250
Voltage
12
Charger Amps
Dimensions
L315 x W215 x D90mm
Weight (kg)
3
Warranty
5 Years
...Read more
View Product
£482.95
Sterling Power Pro Charge ULTRA Battery Charger 12V 40A (3 out) PCU1240
With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market.
Features
Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity.
Battery Temperature compensation sensor included.
Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated.
Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections.
Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability.
Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V).
Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses.
Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish
11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel.
Brand
Sterling Power
Manufacturer Part Number
PCU1240
Voltage
12
Charger Amps
Dimensions
L260 x W215 x D90mm
Weight (kg)
2
Warranty
5 Years
...Read more
View Product
£409.95
Sterling Power Pro Charge ULTRA Battery Charger 12V 30A (3 out) PCU1230
With years of experience in this market everything we could possibly think of was combined into this product range, resulting in the Ultimate Battery Charger. However, do not take our word for it. This was confirmed on its first competitive test with Sailing Today Magazine where it won premium product against the toughest competitors (Mastervolt and victron plus others). It was described as “this has to be the most flexible marine charger on the market today”. Similarly, the Pro Charge Ultra won the innovation award at IBEX Kentucky 2010, the largest international boat building exhibition in the USA where the Pro Charge Ultra has been recently released onto the market.
Features
Power Pack / Power Supply. This charger works effortlessly as a power supply to DC loads to prevent depletion of your battery capacity.
Battery Temperature compensation sensor included.
Automatic Desulphation mode: 7-10 days cycle with anti-stratification program to keep batteries rejuvenated.
Perfect for generator use. Due to its active PFC tolerance of AC input it shall run from crude sine wave forms – typical from generators. Also, % Power Reduction you can set the charger to run at lower power outputs to complement a wider range of generators and low shore power connections.
Larger voltage / current requirements? The Pro Charge Ultra series can be put in series or parallel with other Pro Charge Ultras. This is enabled by the chargers have dynamic charging ability.
Truly Global Application and perfect for generators. The Pro Charge Ultra shall work at AC voltages (80-270VAC and 40- 70Hz) and DC voltages (130-320V).
Comprehensive 32 LED front panel. The user is provided with a voltmeter, ammeter and output power display. The panel also includes charging profile statuses and warning statuses.
Multi Lingual. The Pro Charge Ultra now comes with front labels, Remote control and instructions in different languages: English, French, German and Spanish
11 pre-programmed charging profiles for AGM, Gel, sealed/flooded and calcium batteries. We also include a customizable option to allow the user to programme their own profile via the front panel.
Brand
Sterling Power
Manufacturer Part Number
PCU1230
Voltage
12
Charger Amps
Dimensions
L260 x W215 x D90mm
Weight (kg)
2
Warranty
5 Years
...Read more
View Product
0 Kits Selected✕
Recommended Full Kits
Loading...
£3,096.12
£2,658.96
£2,576.49
£2,409.49
£2,610.30
Loading...
£2,576.49
£2,409.49
£2,438.68
£2,223.66
£2,610.30
£1,392.64
£2,129.28
£2,316.26
£2,223.66
Loading...
£3,997.58
£4,130.58
£3,780.58
£3,096.12
£2,658.96
£2,576.49
£2,409.49
Loading...
£1,287.58
£1,019.18
£1,543.99
£2,373.90
£1,681.63
£1,287.58
£1,019.18
£1,543.99